Do-it-yourself wardrobe on the balcony: step-by-step instructions and photos of various options. Do-it-yourself wardrobe on the balcony: step by step instructions How to make a built-in wardrobe on the loggia

Everyone is used to storing a wide variety of things on the balcony, which it’s a pity to throw away, and you can’t leave in the apartment. But so that the balcony does not look like the Plyushkin house, it is best to make a closet on the balcony with your own hands, so that you always have the opportunity to beautifully arrange things. Making a cabinet is actually not difficult, you just need to buy the material and have a minimum of tools. And at the same time, if you do everything yourself, you will not only save money, but also make a cabinet that will ideally suit you in terms of its functionality.

If you decide to make a wardrobe on the balcony with your own hands, then you need to start work with the drawings. You can find drawings in open sources, but it's best to draw them yourself, depending on what kind of material you want to use. In addition, size and location play a role, as everyone has their own balcony and their own needs.

If you do not have this experience, then you can take the drawing that suits you best and simply change the dimensions in it. Please note that for a corner cabinet on a balcony, the drawings will differ significantly from simple option, so be careful not to mix up the sizes.

When the drawings are ready, you need to calculate the amount of material that you will need to make a wardrobe for the balcony. It is better to buy materials with a small margin, so that later you do not have to go to the store again. In addition, remember that on the balcony or loggia always high humidity and temperature changes, so the material must effectively resist their effects, or it must be additionally protected. If you make furniture from lining with your own hands, then after the work is completed you need to additionally protect it antiseptic impregnations and varnish. Therefore, they should also be added to the shopping list.

Tools for the job

To do wooden cabinet on the balcony, you won't need many tools. You must have only the simplest tool available. In most cases, if desired, you can do without hand tool, except for a drill, which is needed to drill holes and tighten screws.

It will be possible to save space in the apartment and carefully equip the balcony by preparing roomy drawers for this room. Everyone can make furniture on their own, if you first figure out what to make a closet on the balcony from and how to proceed. Spacious shelves are suitable for storing conservation, clothes, bulky items, building materials. Making racks for a balcony will not take much time and special skills will not be needed for this work. Everything necessary materials easy to find in the hardware store, and tools can be found in every home.

Construction types

Before proceeding to the manufacture of furniture, it is important to decide what type of product will fit well into the dimensions of the balcony. If space small size, then you should pay attention to the built-in model. In the process of carpentry, the walls of the balcony will serve as load-bearing structural elements. Shelves and racks are attached to the walls of the balcony without taking up much space. It is not difficult to make a built-in wardrobe on the balcony with your own hands, but before starting work it is important to think through all the details, since it will no longer be possible to move the product if necessary.

When there is a lot of space in the room, then it will turn out to be supplemented with a cabinet. Carpentry work will require large financial costs, since it will be necessary to manufacture all structural elements and the inner wall, including. The product takes up more space on the balcony, but if necessary, it is convenient to move or transport it when moving.

Make corner cupboard on the balcony with your own hands will be a little more difficult than the two previous design options, but such a product is very roomy. This type of furniture is built-in or cabinet type. This model is made in the form of shelves attached to the corner of the room. An angular type product is installed on an insulated loggia or balcony.

It will be much more convenient to be in the room if, before making a built-in wardrobe or cabinet on the loggia, you decide what doors should be. You can make a design using the following elements:

• Swing doors. Suitable for the loggia, where there is a lot of free space. You can install doors to the entire height of the structure or divide the structure into certain zones, where each will have its own door;
• Accordion doors, compartments and roller shutters. This type of door is suitable for a room where space is limited. They will help save space and conveniently use the closet.

What materials will be required?

You can make a cabinet using plywood, wood, chipboard, drywall or plastic. If desired, you can combine several materials with each other. In progress finishing works it is actual to use PVC or. Use natural wood, making a wardrobe on the balcony with your own hands, it is important in the case when the room is not glazed. If you pre-coated the tree with waterproof paint or varnish, then it will be possible to prevent damage to the material under adverse weather conditions.

Before deciding on the building material from which the cabinet will be made, you need to take into account the design of the balcony, whether the room is insulated or not, and what load will be on the shelves. A universal option for any type of balcony is natural wood. Materials such as plastic and MDF are also resistant to moisture.

Product frame

Having decided to make a wooden wardrobe for the balcony, you should consider what material to use for each individual element designs. In the manufacture of the product, the main attention is paid to the frame and doors. Some cabinets are complemented by a side rack and trim.

It will be possible to make a cabinet frame using a beam with a section of 50x50 mm or 40x40 mm. Like option is suitable for a heated balcony. If the room is not heated, then it is better to exclude wooden frame and pay attention to other materials, since under the influence of moisture the tree will change its size and begin to deform.

A universal way to make a frame is to use galvanized profiles for, as they do not change their appearance under the influence of adverse weather conditions. Plasterboard, chipboard, plywood and other materials are very easily attached to the galvanized profile.

Cabinet shelves

Make quality and reliable cabinet on the balcony it will turn out if you choose the right construction material for shelves. The main load will be directed specifically to this element of the product, so the shelves will have to be given special attention. Chipboard, OSB or thick plywood is best suited for the manufacture of this part.

If the load on the shelf is more than 5 kg, then it is better to give preference to a wooden board. Such material will perfectly cope with the load in the form of conservation, dishes or books.

Shelves are attached to pre-mounted bars or self-tapping screws. It will not be difficult to make a frame for a cabinet from bars if you prepare all the tools and materials in advance. It will turn out to make a wardrobe using metal corners where you can also attach shelves. If the cabinet is of a built-in type, and the walls of the balcony can be drilled, then it is important to use corners and self-tapping screws.

A do-it-yourself wardrobe on the balcony will look no worse if you build shelves using metal rails and brackets. In this case, changing the height of the shelves is very simple, just hang the brackets on another hole.

Build shelves out of the remaining scraps wooden planks. Before attaching the part to the frame, it is important to pre-prepare the boards. To do this, they are covered paintwork material(preferably for water based). Such shelves will not be deformed under the influence of moisture and ultraviolet radiation.

Preparatory work

Before moving on to carpentry, you should stock up necessary tools. Prepare electrical devices in the form of: screwdriver, electric jigsaw. You will also need to take a hammer, a chisel, a building level and a square. You can not do without nails, self-tapping screws, a plumb line, a tape measure and a dowel in the manufacture of a product. It will be easier to draw a drawing of a cabinet on a loggia by preparing a ruler and a pencil in advance.

Before you start assembling the cabinet, pay attention to the following points:

1. Pre-repair the floor surface on the balcony. If it is not possible to repair the entire floor on the loggia, then pay attention to the area where the closet will be located.
2. In the process of installing a cabinet on a balcony with your own hands, drawings will help you avoid trouble and get the desired design.
3. If you install the structure on a glazed loggia, then the cabinet will last much longer;
4. Insulate the balcony (walls and floor) in advance and eliminate the gaps with mineral wool, foam or PVC. Such a measure will extend the shelf life of the cabinet.

How to make a product for a beginner?

Having understood what the cabinet on the balcony is made of, and how to properly prepare the room, you should proceed to the next step. Consider in advance where the structure will stand, and also consider whether the balcony is glazed or not. This factor will help you figure out which material is better to use for carpentry.

Beginners can make open cabinet in the form of a bookcase. The process of creating a cabinet for a loggia includes the following steps:

1. Using a tape measure, measure the exact dimensions of the future cabinet.
2. Prepare a drawing. Consider the width, thickness and height of each piece.
3. Buy the necessary materials at the hardware store and prepare the tools.
4. Focusing on the dimensions indicated in the drawing, make markings on the boards with a pencil.
5. Using the prepared materials, cut out the details, assemble the frame and attach the shelves.

It will be much easier to make a wardrobe on the loggia with your own hands according to a photo or drawing. Make a frame, adhering to the basic rules. Start assembling the frame, starting from the bottom. First, set the base evenly, and then attach vertical parts to it. After that, fix horizontal parts on the structure, not forgetting to fix the rigidity of the product. Then attach the ledges where the shelves will be located.

When you begin to assemble the cabinet, make sure that the product is level and its parts are arranged symmetrically. If the product will stand on an unglazed loggia, then pre-treat the boards with varnish so that the cabinet lasts as long as possible.

The process of making a cabinet with a more complex design includes the presence of doors. Having figured out what to make a closet on the balcony from, and what tools to use, proceed to the following steps:

1. Consider a drawing. Decide on the dimensions of each part, the height and depth of the cabinet and the distance between the shelves. Think about the order in which you will assemble the details of the structure.
2. In order to make hinged or sliding doors for a cabinet on the balcony, buy hinges, handles and fasteners.
3. Using the drawing, prepare the materials, cut out all the main details with a saw.
4. Assemble the wardrobe one by one using building level and plumb.
5. At the final stages, sheathe the cabinet with clapboard or plastic (the sheathing should be combined with the rest of the repair on the loggia).

Assemble the wardrobe on the loggia with your own hands according to the drawing, starting from the bottom of the frame. First install the support, and then fix the longitudinal and transverse parts. Then attach the shelves and doors. Try to evenly and accurately fasten the hinges on which the doors will be located. At the end, attach the handles to the doors. To prepare holes for hinges and fastening handles, you can use a drill and a chisel.

Unusual design ideas

Install on the loggia is relevant not only the usual hinged wardrobe with doors, but also other cabinet options with beautiful design. It will be much easier to develop a wardrobe design for a balcony from a photo and ready-made drawings. Frosted glass inserts will help to make the product as cozy and homely as possible. Unusually on the balcony looks like a cabinet in the form of a kitchen sideboard.

Visually increase the size of the room will help wardrobe with mirrored doors. It will also be possible to equip the product in the form of a workplace. A similar option is suitable for an insulated balcony. A computer monitor and a system unit can be hidden behind the cabinet doors.

It will turn out to complement the closet with fresh flowers or books, if you think over neat shelves on the side in advance. If the loggia is large and it is insulated, then the room can be equipped as private room. The lower part of the cabinet can be arranged in the form of a soft bench or sofa. It is important to equip the window sill on the loggia in the form of a table and complement it with a folding chair.

Wardrobe on the balcony - video

A closet on a balcony (loggia) is a thing that saves every housewife from the messy littering of this non-residential area. Initially in Soviet time began to build multi-story houses with balcony or loggia. The idea was such that citizens can go out to breathe fresh air at any time, so major cities, in the old part of the city, you can see small wrought-iron balconies that can accommodate no more than one person. Now the balcony is a functional and full-fledged area of ​​​​the apartment. They are glazed and sometimes insulated. The owners adapt this area for domestic needs and a closet on the loggia - a very common phenomenon, due to its functionality.

The line of furniture comes after completion, and it is often adapted to store seasonal items, such as outerwear, rarely used fixtures, blanks and tools, so it is made with many shelves and with a convenient depth of about sixty centimeters.

Usually, chipboard or a metal base is chosen for manufacturing. For doors use wood, chipboard, plastic.

Storage places are built-in, corner and cabinet.

Usually cabinets are made on unheated balconies to make a gap between the walls of the loggia and the furniture structure for air ventilation.

If the balcony is not heated, then putting the closet close to the wall is not worth it, because condensation or dew may appear, and mold will appear.

Also on door system they differ in:

• swing,
• Sliding (coupe),
• Blind system.

On narrow balconies, it is advisable to use a swing system or blinds. This will provide full access to the inside of the cabinet. And place a wide object on the shelf without barriers.

The blinds system is shown in the photo.

On the swing doors magnets can be installed to automatically close the doors or closers.

V budget options to close the doors use ordinary latches.

The compartment system is used on wide balconies, or if the closet is equally divided into two independent areas.

It often happens that the lower width of the balcony is narrower (due to finishing and insulation) than the top. In this case, a combination of two cabinets is made: up to the window and above the window sill.

General instruction for the manufacture of a storage system with compartment doors is simple and is described in:

1. Take measurements and drawing.
2. Buy material.
3. If the cabinet is built-in, then you begin to install the bars (40 * 40 mm) along the edges, screwing them to the wall so that they do not vomit.

4. All open surfaces, except for the front, are covered with plywood or chipboard.
5. Shelves are installed on the corners.

6. Doors are hung on ordinary hinges or inserted into guides.

Be sure to measure all horizontal and vertical surfaces with a level.

If you are making a cabinet, then when assembling the frame, you need to measure the diagonals of the structure, so you will avoid curvature of doors and shelves.

When installing it on a balcony, you need to step back one and a half centimeters from the walls so that the air is quietly ventilated.

Exemplary diagrams and drawings are shown in the photo.

Scheme of external and internal filling dimensions cabinet.

An example of a drawing of a narrow furniture assembly.

Scheme of a cabinet with legs.

View of the finished cabinet with a drawing and filling variations.

Corner cabinet on the balcony from the lining

Corner cabinets are suitable for narrow or non-standard balconies (loggias). The basis is the shelves, which must be clearly measured to fit the angle.

If the balcony is finished with clapboard, then the door can be made under the general view.

To do this, we make a frame and sheathe it with material.

The photo shows the mounting of the shelves on the brackets to the wall.

If you can also bring out the walls, then it can turn out to be quite roomy.

Built-in closet to the balcony

Built-in wardrobes can have several options for installation.

Usually, before installing it on a balcony, they make steam and moisture insulation in order to save furniture for many years.

Shelves are installed on the bars. To do this, a frame can be made from the bars to give rigidity.

The photo shows a frame for a small low cabinet.

Another version of the frame for embedding.

Can be used metal system mounting brackets.

By moving the brackets in height, you can adjust the location of the shelves, which increases the functionality of the cabinet.

Watch a video on how to make a built-in storage system with coupe doors.

How beautiful it is to make a closet on the balcony: photo of finished cabinets

Beautiful storage design options are always inspiring. Below are interesting options ready cabinets adapted to different sizes balconies.

The low zone does not lose its functionality, but does not obscure the window opening.

An example of using blinds as a door.

Beautiful balcony with a compartment system in the storage furniture.

Doors open to one side to save space.

Interesting wardrobe with shelves.

Two-level version of the built-in furniture. Bottom part pushed forward for convenience and spaciousness.

Angular capacious design from a chipboard.

Light and neat built-in wardrobe with doors made of plastic.

The photo shows low furniture under the window and the corner compartment on the side.

Sometimes it is advisable to make shelves near the window. Functionality and the amount of transmitted light does not fall.

Two-level wardrobe from lining. This option allows you to sunlight and don't close the window.

The photo shows a bright wide wardrobe with a shelving system.

Built-in wardrobe with two compartments.

A cabinet swing cabinet with drawers is more functional. There are three zones: mezzanine, middle part and retractable lower.

What ideas do you have for creating convenient system loggia storage?

Inhabitants small apartments due to tightness, they often face the problem of storing things. At the same time, the balcony is usually empty or turned into a place where unnecessary belongings are simply dumped. How to avoid clutter? The best way to do this is to build a cabinet from affordable lumber with your own hands. This is not easy to do, but everyone can do it. We present ideas, drawings, diagrams, sketches and manufacturing technology for balcony cabinets.

1. The cabinet, which is independent design and is not attached to the walls of the balcony in any way. Such a cabinet takes up a lot of space, but at any time it can be moved or removed.
2. Built-in closet, which is usually created by individual project, so it fits perfectly into all the "uncomfortable" places of the loggia or balcony. But in such a cabinet, the walls of the house are used as load-bearing structural elements, to which the side racks and shelves are attached, so it is impossible to move or remove it without complete dismantling.

The following types of doors are used in cabinets:

• compartment doors;
• accordion door;
• roller shutters;
• swing doors

Final Choice suitable option depends on specific conditions. For example, in the loggia you can install a built-in wardrobe. In this case, the walls will simultaneously serve as a back wall for him. But on open balcony it is better to put a regular cabinet.

Particular attention should be paid to the choice of doors. If there is not enough space on the balcony, it is more practical to install roller shutters, compartment doors or an accordion. Hinged doors will be more convenient in a large loggia, where you do not need to save space and you can access all the shelves at the same time by opening the closet. Doors can be installed to the full height of the cabinet, but sometimes it is more convenient to divide the structure into 2-3 functional zones, each of which will have its own doors.

Swing doors are the simplest and cheapest. To assemble them, you only need door panels and hinges, and self-installation in the opening will not be difficult. Sliding systems are more expensive and labor intensive to install. Besides door panels, they will require guides and rollers. But when opened, such doors do not go beyond the dimensions of the cabinet, which can be attributed to the advantages of such a system.

by the most an expensive option doors are roller shutters. They are a custom-made kit and are assembled by the manufacturer.

Door options - photo gallery

Swing doors are the easiest and relatively cheap option, but they are not always convenient. Convenient and economical option- compartment doors Folding accordion door when open does not take up much space Roller shutters as doors to a balcony closet - a convenient but expensive option

The most suitable and cheap materials for building and arranging cabinets

Before starting the manufacture of the cabinet, it is necessary to decide on the material from which it will be made. most popular and available materials are considered:

• plastic;
• Chipboard - chipboard;
• tree;
• drywall.

When choosing a material, they usually take into account the overall design concept of the balcony, as well as their own financial capabilities. Plastic is very convenient here - it is practical, goes well with the interior of the balcony and is easy to use.

V general case the design of the cabinet is a frame, doors and the so-called filling - shelves, drawers, hangers. If there is a side stand, then it will also need trim. Often all these components are made of different materials.

How and from what lumber to build a cabinet frame

Most often, cabinet frame racks are assembled from wooden beam section 40x40 or 50x50 mm. At the same time, it must be taken into account that the tree changes size under the influence of moisture - the beam swells, deforms, the joints move, so for unheated balconies such a cabinet would not be the best option.

Shelves can be made from thick plywood, chipboard, or OSB. If it is assumed that there will be heavy things in the closet that provide a load of more than 5 kg (for example, cans with preservation, heavy tools, dishes, books), then it is better to use a wooden board.

Original, beautiful and easy-to-make built-in furniture for the balcony - photo gallery

A long wardrobe, placed under the window along the balcony, will accommodate even more things. High two-level wardrobe with hinged doors and side cabinet Small cabinet under the window, lined with plastic A low cabinet under the window, or a cabinet for the balcony will serve as a table at the same time Complex solution: a tall cabinet with doors and open shelves along the loggia Built-in corner cabinet

Ideas, diagrams, drawings and step-by-step instructions for assembling balcony cabinets

After you have decided which type of cabinet will be most convenient for you, you need to start creating the most accurate drawing. Below we offer you several developments designed just for installation on a loggia or balcony:

1. The simplest version of the rack, consisting only of shelves. This model does not involve the installation of doors, but you can independently calculate their dimensions and mount them by attaching them to the front frame.
2. The second option is designed for installation in a wide loggia. In such a closet, you can store clothes on hangers. True, it is desirable to place it on an insulated, or better, heated balcony.
3. The third option will fit perfectly into a narrow balcony, and will also be a great addition to a table or cabinet. You can, if desired, install additional removable shelves on the corners yourself.

After reviewing the presented drawings, you can easily draw up your project by changing or adding some parameters in accordance with the size of your balcony.

A list of tools needed for carpentry work on arranging wooden cabinets.

• self-tapping screws, dowels, nails;
• hammer;
• chisel;
• electric jigsaw or hand saw;
• electric drill with nozzles for woodworking;
• screwdriver (a set of screwdrivers);
• ruler, pencil, tape measure, plumb line, square and building level.

Here are a few more simple tips before building a wardrobe on the balcony:

1. On a glassed-in balcony wood trim will not suffer from dampness, will retain its attractiveness and good quality for a longer time.
2. It is advisable to pre-repair the floor on the balcony, or at least the area on which the cabinet will be installed.
3. It is advisable to eliminate all cracks and crevices, insulate the walls and floor of the balcony, which will provide protection from temperature changes and drafts and significantly extend the life of the closet. For insulation, you can use foam, PVC, or mineral wool.

After the measurements are made, the type of cabinet is selected, the drawing is drawn up, you can proceed directly to work.

Stages of self-assembly and arrangement of the cabinet

Even a beginner can easily handle this cabinet. To make it, you will need the following materials:

The amount of pine timber must be calculated taking into account the selected dimensions of the future cabinet. For simplicity, let's take standard sizes, most suitable for the balcony space: height - 1.8 m, width - 1.5 m, depth - 0.5 m. Accordingly, the beam will need:

• for the lower frame 2x0.5 + 2x1.5 = 4 m;
• for the upper frame 2x0.5 + 2x1.5 = 4 m;
• for uprights 4x1.8 = 7.2 m.

As the back wall of the cabinet, you can use a sheet of laminated fiberboard. This dense and waterproof material will additionally protect the structure from moisture, it is attached to the rear frame with construction stapler, or self-tapping screws.

1. First, assemble the back and front frames of the cabinet. To do this, fasten together the vertical and horizontal bars with metal corners.
2. Instead of corners, the bars can simply be connected with wood screws 60–75 cm long, as can be seen in the photo below.
3. Then, with self-tapping screws or staples of a construction stapler, attach to the rear frame of the frame back wall closet. After that, fix the resulting structure in the opening of the loggia with anchors. At this stage, you can lay a sheet of thick plywood or chipboard on the floor under the future cabinet, which will serve as the bottom.
4. When the frame is installed, fasten to it cross bars and fix them with anchors.
5. Attach the front frame to the ends of the bars. After that, fix it with anchors in the walls, floor and ceiling - this will give the structure rigidity.
6. It remains to fasten the guides with self-tapping screws, which will become the holders for the shelves. The length of the horizontal part of the rail must be equal to the depth of the cabinet. Lay the cut-to-size shelves on the rails, securing them with self-tapping screws if necessary.

In fact, a simple wardrobe is already ready. It can conveniently place almost everything that is usually stored on the balcony: cans, boxes with clothes and small things, tools. It can also be used as a bookstore or to store old magazines. But if there is a need to completely hide the contents of the cabinet, this design can be equipped with doors and sheathed with clapboard or drywall.

Choice of materials for cladding and doors

If you decide to sheathe the cabinet with clapboard, take hardwood material. Most often there is a lot of sun on balconies and loggias, its rays heat the surface. From this lining from conifers begins to secrete resin.

The next thing to consider is the quality of the material. The cost of lining also depends on its grade: A, B or C. Grade A material is smooth, uniform in color, it is ideal for sheathing and for making furniture. Grade B has inclusions of a different color, slight roughness and irregularities, but is good in the price-quality ratio. But grade C lining is not suitable for cladding: an uneven surface, cracks, chips and rough colors will not add aesthetics to the finished product.

Note! Since the cabinet door should be light, it is better to choose a lining for it thin.

Installation of doors on the built cabinet

The use of drywall

Instead of lining, you can use an even simpler and cheap option- drywall. He looks great on finished construction and it is easy to mount on a ready-made frame.

1. First, sheathe the frame with drywall sheets cut to fit the cabinet. Drywall is attached to the frame with self-tapping screws.
2. After the sheathing of the frame is completed, you can begin to finish. Glue the drywall joints with reinforcing tape, putty and sand. Prime the surface, and after drying, cover with water-based paint. Alternatively, it is also possible to wallpaper the drywall to match the interior of the balcony.
3. Now it remains to assemble the doors. In this version of the cabinet, it is preferable to install sliding doors. Due to the abundance of spare parts, it seems that it is difficult, but the diagram will easily help you figure out the problem.

Do-it-yourself wardrobe on the balcony - video

How to equip a corner cabinet from lining

The advantages of lining as finishing material long appreciated by home craftsmen. In particular, loggias are very often sheathed with it. We suggest that you do not limit yourself to this, but construct a comfortable and beautiful corner cabinet from the same lining. This design will be both roomy and compact, besides, it will not block the windows.

• Racks do not need to be fixed. It is enough to nail the bars on the ceiling and floor, and fix the walls on them.
• Do not make them too wide, 3 boards for each is enough.
• Nail planks to the lining on the walls, lay shelves from the same lining, cut out in the shape of a cabinet, on them.

• From the bottom and top of the opening, stuff 1 plank across.
• Measure the remaining distance, subtract 1.5 cm for inaccuracies.
• Measure the lining of the declared length.
• Adjust the number of boards according to the width doorway. In our case, it took 6 pieces.
• Knock them into one canvas with 4 cross bars and hang on simple door hinges.

The use of plastic panels in the manufacture of balcony furniture

It often happens that the installation of a drywall cabinet, lining and chipboard is impossible. These materials are sensitive to moisture, and it is sometimes difficult to make a complete waterproofing on a balcony or loggia. In this case, plastic panels will come to the rescue. They have many advantages over other materials:

The principle of installing a cabinet from plastic panels identical to those described above, but there is one nice feature. Plastic is a fairly flexible material, and you can make the back and side walls from one wide sheet by bending it in the right places. Before bending a thick two-layer sheet, it is enough to cut one layer at a time. In addition, the sheet can be cut into panels of the required width and fastened together with special fasteners.

Doors made of plastic panels are very light and easy to install. If the issue of saving money is not acute for you, you can order from the company already finished doors required size.

How to make a wardrobe and cabinet for a window for a balcony or loggia - video tutorial

Cabinets, shelves and cabinets are a great way to organize the space, especially if it is small. So, for a balcony and a loggia they are necessary. We hope that our tips will help you equip your balcony, make it functional, cozy and beautiful. Tell us in the comments about your experience in arranging such small isolated rooms as loggias and balconies, or ask any questions you have about this topic. Easy work for you!

How to do beautiful closet on the balcony with your own hands, you can learn from our article, as well as see detailed photos.

We have selected a budget and convenient option that anyone can handle.

Of course, you can make a rack without doors, it will be cheaper, but still much more neat and aesthetically pleasing when everything is closed.

In contact with

classmates

Types and material of cabinets

Cabinets are of two types:

• built-in;
• separately standing.

Separately standing cabinet(not built-in) is assembled in parts and does not take up all the space, since its size does not match the height of the wall, width, etc.

Built-in wardrobes are much more convenient. They use space more rationally, and less material will be spent on them, since it is not spent on invisible walls.

Such a wardrobe will ideally fit into the place of your choice, as it is created individually. But in the future it will not be possible to move it to another place if desired.

The main materials for cabinets are:

• Tree. This material looks more beautiful, and the strength is high. But if you assemble a free-standing cabinet, then it can be more difficult than it seems.

In addition, the tree is heavy, which makes the structure more bulky and heavy. It is also necessary to take into account the humidity, because if moisture enters it, it can be deformed..

• . This material is much easier to assemble. But the strength is inferior to the tree, and the weight of the load is less.

Manufacturing steps

1. Preparatory stage.

To take into account all the nuances, you need to draw an approximate drawing. In it, calculate all dimensions and think over details, such as shelves and doors. When calculating the dimensions, the thickness of the materials should also be taken into account.

After you have drawn an exact sketch, match it in size with a balcony. If everything fits, then mark with a pencil the approximate placement of the design details.

Pro tip: due to temperature changes, the cabinet can be deformed, so it is better if the balcony is glazed.

It is not necessary to level the floor, since it will also be the bottom of the cabinet, so stability does not depend on this. But the walls will have to be leveled, as shelves will be attached to them.

1. Frame assembly.

First of all, install the rails. They can be:

• wooden;
• metal.

There is no difference as such, in both cases you must first outline their location, and then fix them with screws. Next, we proceed to the suspensions and attaching vertical profiles to them.

If your material is drywall, then all installed components should be carefully fixed to increase strength.

Note: the frame should be assembled from the wall to the corners.

1. Sheathing with plasterboard sheets.

This step is very simple. All you have to do is attach drywall sheets to the frame and install a screed that will fasten the sheets and prevent them from moving apart when using the cabinet.

1. Finishing.

The first thing to do is to process the joints. Although drywall is picky and practical, it still requires processing.

Best fit water-based paint, it is first necessary to prime the surface and seal all joints and gaps.

Putty is applied in two layers. Each layer must dry completely and be properly sanded. The paint is applied after the complete drying of two layers of putty.

If there is no desire to bother with paint, then there is an option to simply paste over wallpaper that matches general interior loggia or balcony. This is a fairly budget option.

After doing all these steps, you can safely install shelves finished to match the closet.

1. Door installation.

Most practical option- it sliding doors. All that is needed for their installation is to fix the hangers with guides and the drywall sheets themselves with rollers, thanks to which the door will move apart.

Also an excellent material for self-manufacturing closet on the balcony can become . The most durable and reliable material - wooden lining. It is not recommended to take a lining of lower quality, as it is not quite suitable for sheathing.

A lining cabinet is made in almost the same way as it is made of wood or drywall. inner wall can be made from fiberboard, which will increase the service life by increasing moisture resistance.

If the cabinet is built-in, then lining with clapboard consists only in installing doors. In this case, the material should not be heavy.

Corner cupboard

Also, as an option, you can consider a cabinet located in the corner. His a definite plus is that the cost of the materials spent on it will be lower, and there will be more space on the balcony or loggia.

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!