Homemade sliding doors. Installing sliding interroom doors - self-installing sliding system for the door. Measures and marking

Sliding structures are becoming increasingly popular due to their appearance and the possibility of saving space in the room. They are actively used to zoning space. Solving installing such a door, you need to know its types and features.

Advantages and disadvantages

The sliding design has both its advantages and cons. To the positive points of use include:

Saving space. It is very relevant in small rooms.
Exterior appeal. It looks unusual and interesting compared to conventional swing doors.
Easily use. This is especially important for people with disabilities.

The minuses include such moments:

Although sliding products and save space, but create difficulties at the location of the furniture next to them. It will have to put it so that there is no interference when opening and closing the door.
Low sound insulation. For a single web, this problem is solved with the help of the adjacent plank, to which it is closed to fit tightly.

Sliding design and its types

Products differ in their own way. Their design may be as follows:

sliding;
harmonic.

Each of them has its own characteristics described below.

Room harmonica

Its feature is that when opening it, it develops several times without leaving the doorway. The canvas of such a door will consist of several identical parts connected by rods or straps. Separate parts can be made from a variety of materials with glass or leather inserts. Each of them attached rollers for the guide.

These doors will be the most economical from the point of view of the place occupied by them. But they narrow the doorway, so it may have to expand it. Actively use such products to zoning space space, they are replaced by partitions. But it is worth considering that these designs have a relatively short service life.

Exterior sliding door

You can make it from one or more structural sizes with the use of guides. Set the product in different ways, depending on the movement of the canvas, which can:

walk along the wall;
hide into the wall;
hide in a special niche.

The door that when opening and closing is moving along the wall, make the easiest way. Its gliding is provided by guides.

In order to hide the cloth into the wall, the doorway should be twice the door wider. Pencil can be made from the hiking card yourself or install the ready-made metal cassette.

Niche, which will hide the door, can be attached to the wall of any material. It is easiest to perform from drywall. But such a niche will occupy the useful area of \u200b\u200bthe room.

Installation Tools

Put interroom sliding doors with your own hands, if you have the necessary tools. These include:

pencil, roulette, level;
screwdriver, hexagon;
screwdriver;
saws.

What you need to know, starting to install

Before buying the door, first of all, it is necessary to determine the size of the opening. Its width and height are measured at several points. If the measurement values \u200b\u200bdiffer from each other, then the basis is taken by smaller ones. Earl align.

The wall along which the design will slide, should be smooth, without convexities. Otherwise, the canvas can be cling.

Fastening the guides should be perfectly even so that the door worked correctly.

Installing Door With Two Guides

This method of installation is used for constructions with several canvases.

Do not forget to check the correctness of the sliding system. The door of the door should be silent, the gaps between it and the pretense vertical bar are not allowed.

Hanging

Another way to install sliding structures is hanging. In this case, the door will not go in the opening itself, but along the wall. Unlike the above-described method, here instead of the bottom guide, a flag roller is installed in order to prevent transverse vibrations of the canvas. In the lower end, there must be a special groove for it, which can be done with the help of a chisel or electric power.

Door hanging has the following steps:

When installing the design using hanging, it is necessary to take into account its weight and material from which the wall is made. Putting on a concrete or brick wall will not cause problems, but the plasterboard may not withstand a large mass of the product.

Installing the door of harmonica

Sliding design in the form of harmonica is sold in a disassembled state. As a rule, an instruction is attached to the product with a detailed description of the collection process and installation. We list the main steps.

A responsible approach to choosing and installation will be a guarantee that the sliding door will serve for many years.

One of the good advantages speaking in favor of installing sliding interroom doors is their fast and relatively simple installation - the whole thing in the absence of loops, complex in assembling the door frame and no less troublesome installation. In general, if you understand the sliding doors thoroughly, you can identify a lot of advantages thanks to which they are preferred. In this article, along with the site, we will deal with the question, how to make sliding doors with your own hands and tell about how easy it is and simply the old swollen systems are converted into more comfortable sliding.

Sliding doors do it yourself: go shopping

Before you go to the store for everything you need for the manufacture of a sliding interior door with your own hands, you need to take a roulette and make some measurements. In particular, it will be needed to know the width and height of the existing doorway - the height is usually standard and is 2000mm, and the width can be 600, 700 or 800mm. Knowing these sizes, you can already acquire everything you need. And if you can be specific, then you will need to buy the following.

In principle, this is already enough to redo the old swing door into the sliding door. But, as they say, everything should be done thoroughly and dwells at all not necessarily. You should also think about a new door frame (they will need a rail, the width of which corresponds to the thickness of the simpleness in the doorway - it is necessary 5m), platbands, a bar closing the sliding system for doors and a thrust rail, if it is being conducted on the sliding interior door closing . And, of course, a new door canvas is useful - only in this case you can make a beautiful doorway.

You can choose and purchase everything you need in the market and in large building stores. The price of the question is not so big - at least less than the cost of similar swing doors.

How to make sliding doors: Cooking the canvas

To prepare the door leaf of the sliding door, it will be necessary either a manual milling and a Bulgarian with a drill, hammer and chisel. What you will work, choose, of course, to you, but from myself I will add that by means of a manual milling, all works are performed more accurate, and most importantly careful. If you represent the process of preparing the cloth to the installation of sliding doors on items, it will look like this.

With the cloth completed, now we go to the sliding mechanism and installation of sliding doors.

Installation of doors: Installation of the sliding mechanism and connecting it to the door of the door

The sliding mechanism is set simply enough - everything that needs here is to fix the guide profile according to the level of the horizon and the location of the doorway. Here you can allocate a couple of nuances.

The edge of the guide should perform on one side of the opening by 50mm. On the other hand, the opening (with the one in which the canvas will be opened) The profile must go into exactly the width of the canvas. This moment must be calculated and cut the door guide if necessary.
The height of the installation of the sliding mechanism - the calculations also need calculations. This installation size folds out of the two components - this is the height of the door leaf along with the rollers inclusive and the clearance under the doorway, which is 10-20mm (depending on the curvature of the floor).
Installation itself, or rather the distance of the guide from the wall. Here, it all depends on the curvature of the walls - if they are smooth, then the guide without any additions is attached directly to the wall through the holes in advance. If the wall is a curve, then it may take to push the guide from it for a while - in this case, a wooden rail is attached to the wall first, and then the guide is fixed on it.

You can see the process of installing the sliding door clearly in this video.

The door canvas is installed on the guide quite simply - the rollers are started at its side. After the door takes the necessary position, it will be necessary to attach the stop to the floor, which we selected a long groove from the bottom of the door leaf. Open the door to the maximum so that they do not fly out, inside the guide self-tapping screw at the metal, first fasten the rubber pillow, which is a limiter, and then in the lower groove of the canvas, we turn half the stop and fasten it to the floor of a dowel on one side. Now we move the web in the direction of the closing, choose its right position and again fastened the upper limit of the stroke of the web, and then finally fix the outdoor stop by two more dowels.

Installing sliding doors scheme

In conclusion, I will say a few words about the design of directly the outlook itself - without this stage of work, the installation of sliding will be incomplete. From the rails with a thickness of 10-20mm and the width corresponding to the thickness of the simpleness, a certain similarity is twisted, which is mounted in the opening using the mounting foam. When a polyurethane sealant dry out, platbands are installed on both sides of the box. If you plan to install the door with a lock, then instead of one of the platbands, a stubborn timber is put with a groove for the web. In the same stubborn bar, the response part of the castle is mounted.

That's all. It remains to add only that the opening itself can be issued in different ways, and the wooden rail is not a panacea. For example, it looks quite well in this place laminate (it is also mounted on the foam), and the harmoniously selected natural stone or ordinary tile looks quite well. In general, thinking here is above what, and the choice of materials for the design of the opening depends solely on your preferences.

Modern materials make it easy to make sliding doors with their own hands. It is much more profitable than buying ready, which in most cases have a high cost. With independent manufacture, you can make the design of a non-standard size for any doorway, you can make several separate zones from a regular room, a sliding partition can be separated a dressing room, highlight a small balcony greenhouse, and so on.

Sliding doors have a lot of advantages:

significant saving of space, due to the movement not inside the room, but along the wall.
very simple installation
they do not open air flow, draft,
wide spectrum used for the manufacture of materials,
sliding doors can be done.

What sliding door can be made with your own hands

There are several types of sliding doors, but if there is no experience, it is worth starting from the simplest - the jigger mechanism when it consists of one part and moves to the side, or from two parts and moves down on both sides. Enough to study, you can try to make cascading or radius structures with your own hands. The principle of work is that the door canvas, fixed on the rollers, smoothly slides along the wall, on the guides.

The material from which the product can be performed is:

wood,
glass,
polycarbonate.

The most practical and unpretentious, are sliding interior doors from polycarbonate. Polycarbonate is an easy and reliable material that comes to any conditions of application is not fragile and completely safe, even cracked, it does not give sharp fragments. It is not deformed by moisture, it does not burn, has a wide variety of colors and the level of transparency, weakly scratched and very simple. Installing a new or replacement of a regular door to sliding polycarbonate will make the interior attractive and extraordinary.

Interior polycarbonate doors made by their own hands can be frame and frameless.

Frame - implies the room of small fragments of polycarbonate in a special frame, the advantage is low cost. Frame can be made of plastic, metal, wood.
Frameless will cost more, but also look more worthy. Move from a solid piece of polycarbonate. They will give the whole room mystery and elegance.

To make sliding doors made of polycarbonate with your own hands, you can see examples from directories placed on the sites of manufacturers. Estimated by choosing a model, you need to buy the necessary materials and proceed to the manufacture. It will take such a tool:

roulette,
level,
screwdriver or screwdriver
drill,
lobzik, manual or electric,
self-tapping screws, bolts.
construction solo.

Required material:

polycarbonate
guide profiles
roller carriages
furnitura.

How to make a sliding door from polycarbonate with your own hands

In order to make sliding interroom yourself, you need quite a bit:

Place the canvas in the frame if the design does not imply it, the first stage is skipped.
Secure guides.
Install the finished product.
Hang fittings.

Preparation of door leaf

First of all, you need to make measurements of the doorway, where it will be directly installed. The second stage of the frame assembly - it should be slightly less than the opening, so its size should be reduced by 1-1.5 mm on each side. The prepared framework, with the help of a constructional carbon, is measured on a clear rectangle of the design to prevent the skew and is only fastened. Fragments of polycarbonate to the frame are fastened with self-drawers or decorative fasteners. The frame can be made with your own hands, both from new materials, and cut out from the usual old door.

In the manufacture of frameless design, the process is even easier. The sheet of polycarbonate is cut on the old door or clearly in the size of the doorway.

Installation of guides

There are two types of guide systems - steel and aluminum. Steel is stronger, withstands heavy loads, but more noisy and looks rude. Aluminum - looks more aesthetically, the rollers in it are moving silently, but it is not so durable. The choice is yours, and do not forget that 50% of the smoothness and softness of motion depends on the correct installation.

Interior doors move along two guides - upper and lower. There is also another type of construction - mounted, where the guide is attached to the ceiling or the top of the wall, and the canvas are suspended with rollers.

The length of the guide profiles must be twice the width of the door web.

Guide profiles are attached to the floor, ceiling or wall. The main condition is to set them absolutely exactly, otherwise the door from the polycarbonate will independently open or close. Make it you need using a long level. Another point is to clearly note the vector of motion in space. With the help of a roulette, it is worth making the launchers on the floor and the ceiling, everything is thoroughly measured, and only then fasten.

Installation of the door leaf

Depending on the size, you need to select the number of roller mechanisms. If the web is quite narrow, there are two - upper and lower. With a normal width, you should use two below, two above. With a mounted system, you need to apply at least two.

The procedure is as follows:

the fastening bolt is inserted inside the roller carriage
roller mechanism insert into the guide,
from above polycarbonate doors, you should install brackets for roller carriages, retreating from the edge of 4-5 mm.
the sliding door on the rollers is installed directly. First, in the brackets at the top, then the bottoms are twisted. Without having experience, it is quite difficult to do it, extraneous help will not hurt. If necessary, adjustment is performed, this can be done, tightening the bolts.

There is a second way:

rollers are immediately screwed from above and below,
the upper part is inserted into the guides,
slightly raising the door, you need to insert it into the bottom profile.

The option is selected based on the features of the roller mechanism. Check the quality of the installation, you can pass several times to the right and left. If there is no noise, jerks, the design is not cling to anything, walks softly and smoothly, it means everything is done correctly.

After the installation is completed, stopors are installed at the edges, then the handles, decorative planks, locks and other door fittings. If desired, you can replace the usual interior doors to sliding from polycarbonate with your own hands, thereby won the area of \u200b\u200bthe opening radius. For this, it is necessary to replace the cloth and install the guides.

For the use of the useful living area to the maximum of the hosts make sliding interroom doors with their own hands. They create a unique design capable of separating the living space into separate sectors and combine in the same room.

Attractiveness and disadvantages of sliding structures

It is necessary to present in detail what advantages have sliding doors, as well as possible problems that will have to be solved. Of the advantages allocate the ability to save space, even in an ordinary apartment will appear extra meters. Plus, with such doors, any housing acquires individuality, transformed.

Supports such a design is beyond. Some options are performed without thresholds, which is important if there are elderly, disabled or small children among the tenants. Installation and subsequent use of the sliding partition is simple. Today's technology today provides the ability to automate the product, which gives additional amenities.

Disadvantages may appear if you use the design illiterately. It is necessary to constantly keep in the health and purity guides and the roller system. Dirty mechanisms are damaged, the door canvas encourages. Very weak soundproofing due to cracks brings additional inconvenience. Also through the gaps in the living rooms will penetrate the smells from other rooms.

Install the sliding door is more complicated than the swing, high accuracy is required. Moving canvas require accurate installation between themselves and relative to the door frame. Many are afraid of high prices for sliding structures, which is impossible to consider their advantage.

Different design options

All attachments operate on the same principle: they do not open, but move along the wall and other door canvases. Execution has several options:

traditional using the principle of a wardrobe;
cascade
in the form of folding harmonica or book;
doors moving along radial guides.

In any design, it is allowed to use one, two or more sash.

The coupe doors belong to the easiest performed, have many subspecies. It is more reliable to make them with two - upper and lower - guides to move sash. However, this option is complicated, as it requires an absolutely accurate fit of both guides. The lower rail is attached to the floor, where it forms a threshold, or hide in the recess. The larger disadvantage is that there is constantly going to dust and trash, slowing and blocking doors. Therefore, it is necessary to constantly clean the lower rail.

Suspended structures consist of one guide above, the bottom is not used. The place of attachment rails are chosen depending on the height of the door: it can be a wall or ceiling. The guide is closed with a decorative panel or remains open. The disadvantage of such a design can be considered the fact that on the part of the door to put the furniture from the wall or something else is problematic.

Cassette doors are performed in the suspended version or on two rails. They differ from others in that when the partition is discovered, the door leaf is hidden in a niche. In a private house, it is better to plan such a penalty in advance, its manufacturer of plasterboard is permissible in the apartment. Of course, Niche will take the useful area, but the losses are compensated by good sound insulation. You will have to perform a lot of alterations, in addition, the cost of the cassette is added.

The device of cascading doors is performed with two guides - from below and on top, each canvas moves along its rail. The advantages of the system made of sliding doors with their own hands is that you can exhaust zones or expand the area to the hall, collecting the canvas on one side. For doors, natural glass is often used as a material, the lower guide is inserted into the floor, and the upper attach to the ceiling.

The harmonica consists of a certain amount of cloths on the end hinges. The width is painted multiple doorway sizes and is limited to the presence of free space. If an intercommercial harmonica is planned, the guides are attached to the floor and ceiling. A significant drawback of the design: very bad heat and sound insulation.

Radius systems are definitely suitable only for housing in a large area. To install it, create a special plasterboard semicircular form or buy a finished design. Radius doors operate on two guides, their location is available on either side of the opening or in the cassette. Sound and thermal insulation of the design excellent, but independent production causes difficulties, without certain skills not to cope.

Retractable doors organically fit into any interior. They have an amazing ability to transform the living space. In practice, sliding partitions are used to zonify large spaces. The closed door divides the room into separate zones, and the extension partition returns the original area.

The experience of using retractable partitions between loggias, terraces and residential rooms also deserves attention. Especially spectacularly use glass that freely miss light. The partition opened in summer will immensely expand the area, creating a single space. The coupe has also found use also in utility rooms, while maintaining a useful space. Sliding designs for kitchen separation, toilet, bathroom do not apply, as the smells will penetrate the living space.

Choosing accessories, mechanisms and canvas for doors

Furnitura has its own characteristics defined by the type of device of sliding doors. The handles are hidden in the door leaf so as not to interfere with the movement of cloths relative to each other. Recessed handles also allow free to hide the door in the cassette. Castles are distinguished by the fact that they snap the door vertically.

Buying the doorway in the store has advantages: the product is completed already installed fittings or it goes separately, but selected specifically for this model. With independent search for pens and locks, extreme attention is required to not be mistaken in the choice. Accessories is better to choose with a specialist or catalog.

The mechanism of roller rollers and guides are selected taking into account the following criteria:

constructive option;
number of door leaf;
door canvase material.

When choosing the rollers, take into account the load that the door canvas creates on the entire design. MDF, for example, weighs much less glass, therefore, the carriage rollers will fit simplified and cheaper in the first version. For heavy door leaf, it seems to be installed to install the upper and lower guides. Impairless work depends on the correspondence of guide and roller design mechanisms, their quality, as well as accuracy and accuracy of the installation. For cascading doors, books, the compaction coupe takes the desired number of rollers and choose suitable guides.

The building materials market provides the buyer a wide selection of cloths from different materials and a variety of designer decisions. The canvas should be as close as possible to the size of the doorway, taking into account the box. The most acceptable door width is 90 cm, but may vary in the range of 60-120 cm. Standard height 210 cm, but can be up to 250 cm.

Choosing a product, preference is given by small weight: plastic, MDF, laminate, bamboo. Such interior doors are easier to manage, it is possible to use roller mechanisms of lightweight type. For large mass constructions like metal, glass, wood array is required, even the professional selection of the mechanism and guides. You should not acquire a canvas with protruding outside elements, whatever they do not seem to be. The protrusions are able to create interference for free design.

How to mount snapping doors - General rules for any design

Various constructive design and manifold of products do not allow to dwell on the features of the installation of each individual type of retractable door with their own hands. But the highlights are the same for the doors of any kind. Having learned the general rules how to make sliding doors with your own hands from one canvas, it is not difficult to make a sliding product from more cloths.

Before buying the door leaf in several places, the opening is measured, they make a wooden box in size and install it. The installed, but not fixed box is at a thorough check of horizontal and vertical, adjustable if necessary. The correctly displayed box is attached to the wall with anchor bolts, the cracks bloom to the mounting foam. The desired doorway width of 90 cm for one sash and 120-150 cm for a double door. With a greater width, it will be necessary to install three or more canvas.

Installing the door on the rollers with their own hands begins with the definition of a place for the top guide. For its calculation, about 20 mm are added to the height of the door as a gap between the door and the floor and another 7 cm. On the wall above the opening, there are two tags for which they spend a horizontal trait. A timber is fixed to the wall, the lower line of which coincides with the conducted line. To the lower edge of the bar, the guide is fixed by self-pressing, retreating from the wall by 7 mm.

Length guides are equal to the total width of the door cloth plus 5 cm for normal doors.

Next to the queue setting the roller mechanism, the brackets are pre-on the canvas. It is no need to describe the installation of roller carriages in detail, the process is described in detail in the instruction that each purchase is supplied. On the sides of the door are attached holders, clamps that are best suited for all models, except the book-book, in which are used. Glass products use rubber gaskets for glass fixation. At the same time, you can mount the handles and locks, if they have a need.

Further begin to mount sash. It is better if there is an assistant, then one person holds a canvas, and the second guides the carriage into the profile. Then check the result of the work. If the guides are installed initially strictly horizontally, the door should not shift anywhere on its own. Adjustable carriage bolts door exhibit in an exact vertical position if such a need arises. Check the movement of the canvas, which should be easy, without jamming. Install the limiters in the form of special plugs or studs so that the carriages do not come out of the grooves.

For silent and durable work doors, it is better to choose rubber limiters.

So that the whole design has acquired a finished and beautiful view, as well as to ensure the safety of the mechanical part, which dust and dirt can damage, mounted platbands. They need open mechanisms, for the door in the case there is no such need.

Make a sliding door with your own hands. The main requirement is the maximum accuracy and accuracy in the work. Specively applying his talent masters in practice, you can achieve excellent results from the first time.

Sections Articles:

The enormous popularity of these designs is due to the ability to save such valuable living space. The market offers many different models of such doors. However, having certain skills and using familiar elements, you can make sliding doors with your own hands.

Pros and cons of sliding doors

Before using such an interior solution, you should familiarize yourself with the strong and weak parties of sliding structures. Unfortunately, these products do not always guarantee the solution of all interior tasks. But the manufacture of the sliding door with your own hands allows you to solve a lot of problems.

Advantages of sliding doors:

Saving space;
The sliding door will never close the drafts;
Folds open from the slightest effort;
Ability to automate;
No threshings.

With a large number of advantages there are substantial minuses. If you make sliding interroom doors with your own hands, and then install them and use them, it will immediately affect heat and sound insulation.

In addition, such designs are not suitable as entrance doors. It will not work for balconies or loggias. But if there is a wall of a longest length, then you can apply the designs of glass. How to make such a sliding door with your own hands, you can look at the video.

Another minus is the cost of accessories. Prices for accessories are much higher than the cost of the same goods for ordinary doors. The canvas are also characterized by a higher cost. In the finished version from the factory or the famous brand such a design can cost huge money. Therefore, it is very important to make a sliding interior door with your own hands.

Types of sliding systems

With all the diversity of doors, the mechanism in them is applied the same, and the doors themselves may differ only in appearance.

Several popular structures can be distinguished:

Doors coupe;
Cascade models;
Harmonic;
Systems from several sash;
Radius systems.

Furnitura

Unusual design suggests such an unusual fitness. When going to make sliding doors with their own hands, special locks, knobs and other details are needed. Pens and locks for these structures look unusual - the handles are recessed in the canvas. This is done so that when closing the canvas does not interfere.

By purchasing or making a sliding door with your own hands, can be equipped with all the necessary fittings or everyone will have to be purchased separately. In the second case, it becomes necessary to perform an independent installation. When choosing, it is required to carefully examine the accessories.

How the mechanism is arranged

These doors are called so thanks to the other, not typical of urban apartments, the method of opening and closing. Systems work through rollers who move on special profiles-guide. When going to make a sliding door with your own hands, it is necessary to pay the time to choose the mechanism that is suitable for the canvas. Also the choice depends on the number of sash, such as the door.

The fact is that systems differ significantly by weight. Consequently, a different weight is a different load on the entire system.

Telescopic (cascading) sliding doors.

When installing some types of doors, it is necessary to take into account the number of rollers to then choose the guides to them. For example, if you plan to make cascade sliding doors with your own hands, then you will need to prepare two mechanisms for each web. The guide profile must have 2 chute. It is also very important that one chute in the heading profile for each canvase is required for cascading structures.

That's how you can make sliding doors with your own hands. In the video you can see which mechanisms and fittings are used.

Mounting options

Unique characteristics, high functionality, excellent ergonomic characteristics make it possible to embody the most interesting designer ideas. This is very relevant in a very limited space. And the manufacture and installation of sliding doors can be the best solution and in large areas.

The popular solution is the installation of the sliding system in one room, but between two zones.

For example, a double door helps not only divide the room into different zones, but at the same time leave the room is holistic. Look, how to change the room sliding doors. They are all made by their own hands. In these photos, it is shown how space zonizes.

Another way to use structures is a partition that shares the living part of the room and a balcony or a terrace. But this is relevant only for country cottages. But here the right solution will be the creation of sliding doors with their own hands. Through the transparent glass to the room will fall sunlight, and in the summer it is also warm. If you open the doors, the room is expanding to infinity.

Often such designs are used in technical rooms. The utility rooms or storerooms will be closed and it will be possible to maintain a valuable space. This technique often enjoy in close city apartments.

The most difficult to create a sliding door with your own hands is a radius model. Here the complexity is not only in the production of guides, but also in the creation of the canvas.

Manufacturing process

To begin with, here's how to make sliding interior doors with their own hands. Watch the video - this roller shows the entire process from the beginning to the end.

First of all, you need to go to the store for accessories and everything you need. But before you need to do measurements. It is very important to know exactly the width, as well as the height of the doorway and the canvas. Knowing these parameters can be not only without difficulty and confusion to purchase everything to create sliding doors with their own hands.

Sliding mechanism.

In the construction store, the first thing is acquired by the mechanism. According to the size of door receptions and the web, consultants will be able to choose the desired option. It is worth considering that the length of the guides should be 2 times longer than the canvas. If the system is slightly longer, it does not matter. You can always cut unnecessary.

Also worth thinking about the new door frame.

Perhaps it will be necessary to purchase an extra rail for it. Also before making sliding doors with your own hands, still also acquire decorative strips, as well as stubborn rails. If the task is to make a beautiful door, then you should choose and suitable tight.

Preparation of the web

For preparatory work requires a milling mill or Bulgarian, drill, hammer and chisel. What pick up the instrument is a matter of taste, but with the help of the power tool, preparatory work can be performed more accurately and much faster.

On the lower end part of the canvase, the grooves cut through the center. Its width should be 3 mm. It is needed to install and work the guide. A more accurate groove is done using a milling mill. In general, creating beautiful sliding doors with your own hands using only a manual tool - it is impossible.

Next, it's time to unpack the mechanism and find rollers and brackets in packaging. First, the rollers are connected to the brackets. On the latter, special holes are provided for this.
The resulting nodes are attached to the upper end part of the cauldron and moor the contours of the details. Next - the all the same end parts are selected grooves equal to the thickness of the fastening part of the bracket. Then, the part is screwed to the body housing. In the simplest version, without a lock, you can consider the sliding interior door with your own hands.

At the next stage of work, the castle is installed. All the same manual milling mill is used for work. Mounting place is placed. 900 mm measured from the lower part of the web. Here will be a handle. The lock is cut into the center of the canvas. Length of the castle sharing in half. The length of the lock is postponed from the place where the handle will be. It is done in two sides of the center. Next - at this point make a niche for the castle. Then the lock is inserted and secured with the help of screws.

Professionals are recommended before making a sliding door with their own hands, carefully place the canvas. With incorrect markup, you can spoil the door irreversibly. If door handles are needed, then the grooves or through hole are also cut for them. Hole to make much easier and cheaper.

Installation of the mechanism, installation of the door

Installation of the sliding system is simple. If you do not know how to make the sliding door with your own hands, then even in this case the installation will not be difficult. All that is needed is to install a guide profile strictly by horizon.

The edge of the guide profile is obliged to perform 50 mm from the edge of the opening. On the other hand, the profile is obliged to go to the width of the door canvase. The height of the installation of the mechanism must be calculated. This size folds from the height of the canvas and rollers, as well as from the gap under the door.

The distance of the profile from the wall depends on the wall itself. If the wall is smooth, then everything is very simple. If not too smooth, then, the process of manufacturing and installing the sliding interior door can be slightly more complicated.

The canvas is installed on the guides from the side. After the door sees, the stop is fixed below. Now it remains only to equip the opening. Now you know how to make sliding doors with your own hands. It is not difficult, original and ergonomically.

Such doors are a new trend. Many designers use these solutions in creating unique interiors. Such designs are also popular in Japan. You can decorate your home and expand the space. In addition, how the sliding door is done with their own hands is a very exciting occupation.