How to make doors from the lining. Open cabinet made of lining on the balcony with your own hands - a very convenient and economical option! Cabinet clapboard

The wardrobe makes it possible to more rationally organize space in any room. It can be placed in a residential room or on the balcony, or loggia.

In such an object of furniture, many things are placed, and externally, the product has a fairly attractive appearance. The instruction offered in the article will tell you how to properly collect the wardrobe.

Features of the selection of material for the cabinet

Even inside very small rooms there are niches that can be adapted for rational use - to arrange a cabinet in them. In this case, the most common material for cabinets is a tree.

His advantages:

High ecological purity.
Natural color.
Small weight.
Comparatively low cost.
Accessibility of acquisition.

However, inside the small premises, a wooden product can look cumbersome. The simplest way to create a truly pleasant in appearance design is to use the lining as the initial material for the trim.

The advantages of its use are:

Low price.
Durability.
Simple installation.
Natural naturalness.

Most often for the manufacture of cabinets apply:

Wood. Such lining is in great demand, it looks aesthetic plastic.
Plastic.

A wardrobe made of wooden or plastic lining is quite simple.

Tip: By purchasing material, you should not hurry to take the first panels in the eyes. They must be very careful.

Wooden lining is made of four classes:

FROM. The panel of this class before selling the consumer is subject to minimal processing. They can have bitch, very small cracks, pits, which does not allow such lining to use for the interior decoration of the room and the build of the cabinet.
"Extra".

Classes A, B and "Extra" have a more attractive appearance, and differ only at the price.

Tip: Choosing a material for the manufacture of a closet, you need to pay attention to these three classes, and acquire it, based on its financial capabilities and preferences to the appearance of the assembled product.

The best for the manufacture of lining is suitable materials from:

Oak.
Linden.
Ash.

They are distinguished by the lowest presence of resin.

The volume of the acquired material should be calculated in advance, based on the cabinet design.

For example:

The walls of the room can be the side walls for the cabinet. In this case, it is enough to buy the material only on the covering of the outer part, including the doors.
If the product from the lining will be clearly visible from all sides, you will need to acquire a larger amount of material.

What will need work tools

To make reliable and high quality wardrobe, you will need to purchase:

Brussia square sections from wood 40x40 millimeters, to create a frame.
Profile corners for assembling frame elements.
Small thickness boards or bars, for making the base of the cabinet door.
Lining panels.
Chipboard sheets or ordinary boards for the shelves.
Anchor bolts for fastening the frame in the opening room.
Accessories: Handles, Door Loops.
Self-tapping screws for fixing elements.
For mounting lining - klyamimers and nails.
Screwdriver.
Wooden or electric jigsaw.
Plumbing hammer.
Roulette, three meters long.
Building level.

The material for BRUSIV is better to choose a pine tree - there are no bitch and cracks in it. Bruks should be clean and dry, which will prevent material from premature rotting.

After the acquisition of all components, components can be made for the manufacture of the cabinet.

How to make a frame

Procedure for conducting work:

The front and rear frame frames are assembled. For this:

fixed bars in room size;
metal furniture parts are connected with self-tapping screws.

The DSP leaf is attached as a wall.
The collected design is inserted into the opening and fixed by anchor bolts.
On the side surfaces perpendicular to the back wall fastened the selected amount of shelves inside the product.
Updated design The same bolts attached to the walls of the room.

Controlled the horizontal of the installed bars for the shelves.

How the frame is trigged with frame, surfaces are processed

With the invisible rear and side walls of the cabinet, the casing is in the manufacture of doors. Depending on the preferences of the room owner, their size and quantity are selected.

The order of assembling the door is as follows:

Slipped on a piece of slim board.
Details are collected in the frame.
An intermediate layout is added diagonally, which increases the strength of the structure.
The frame is placed on the floor, it is mounted on it with whimimers or nails lining.

Tip: For the door you should use the lining as thin as possible to ensure its ease.

Inside the door fastened a platband, and on the outside - handle.
The door is hung on the previously installed loops.

If necessary, we need to cover the sidewall panels and the rear wall:

Cut using hacksaw or jigsaw material for the required dimensions.
Fix the lining with nails or kleimers.
In the groove of the first panel, small carnations at an angle are driven.
The subsequent sheets of lining are also attached.
For a more aesthetic appearance on the frame to fix the panels behind Kleimers. They provide a reliable connection, and for the eyes will be invisible.
With proper operations performed, the final product acquires a beautiful appearance, as shown in the photo.

To increase the service life, additional decoration cabinet is treated with special means. It can be a protective varnish for a tree (see).

Video In this article, all operations feature in more detail.

Features of the cabinet frame cover with plastic panels

The plastic lining used for the manufacture of the cabinet is attached similarly wooden. But there is one feature of the material: the connection of the panels can be performed only with kleimers. The use of nails or self-tapping screws can disrupt the integrity of the material with an awkward movement or a sufficiently high effort. In addition, plastic lining wardrobe is recommended only to people who have experience performing such works.

Create your own hands the wardrobe from the lining is not difficult, just adhere to only certain rules and control the quality of work. Quite simple operations allow you to get such a subject of the interior, which is able to accommodate many things used occasionally.

Small financial investments make it possible to create a real work of art, for a long time such a closet will cause admiration.

Today, balconies and loggias serve as additional square meters. Therefore, many tenants conduct high-quality balcony insulation, energy-efficient double-glazed windows are installed. With warm, and even cold glazed, the balcony can become an extra room, workshop. It will take a locker, where it would be possible to store all the necessary things and items (with warm equipment) and those tools and objects that are not afraid of dampness and frost (with cold glazing).

Useful locker

Build a wardrobe from the lining on the balcony with their own hands will be able to any man who is at least a little friendly with a hacksaw and hammer. Moreover, such a locker can be with doors and consist of two different halves, as in Fig. 1, 2, and may have the shape of the open shelves (Fig. 3). In any case, he perfectly "unloads" an apartment from infrequently used, but at the same time, the necessary items.

Cabinet made of lining on the balcony with their own hands from the remnants of the material

Usually, the idea of \u200b\u200bthe device on the locker balcony comes, due to the residue of the sawn timber after the procedure of insulation and the objective of the balcony space or the execution of other works. If the problem is observed with finances, you can equip a wardrobe from the lining on the balcony with your own hands without doors literally in one day (Figure 4). The manufacture of doors, their canopy and equipment fittings will take more time and will require additional costs.

Cabinet with door. one
Cabinet door

Making your own hands - reorganization of the internal space of the cabinet.

The easiest way

Consider the phased manufacturing of the cabinet from the lining on the balcony with their own hands of the simplest way. Its simplicity is that such furniture already has a posterior wall and sides due to the balcony. We need to collect the framework (Fig. 5), equip the shelves. Installation of doors - if possible, and at will. Doors are better to perform with swing design.

First Stage - Preparatory

At this stage, they are determined with the size and draw a drawing of the future cabinet. Its width will be on the entire width of the balcony - 90 cm. Its height depends on the height of the loggia, and in our case it is 220 cm. The depth of the locker can be different, but not too deep, we chose - 60 cm. At a balcony length of 5.8 -6 meters spent on the closet 60-70 cm will not be so sensible for the total area.

Closed cabinet rice. 2. Cabinet without door Fig. 3.

Second Stage - Mounting Frame

For the manufacture of racks need a bar with dimensions of 40x40 mm 220 cm long - 4 pieces. Alternately fastening to the walls of each bar with anchor bolts in 3 positions. At the top of the width and depth of the cabinet are attached 4 bars, connecting vertical racks. We will have a rectangle on the ceiling. If you do not have the installation of doors, then this rectangle is not required at the bottom.

Getting Started with a balcony or loggia, many plans to equip this room in such a way that it can be stored in it that are used quite rarely (like garden instruments or sports equipment). And the easiest way to such arrangement is to make a cabinet on the balcony with your own hands.

We provide a wardrobe durability

As a rule, the cabinet on the balcony or loggia is installed in a niche specifically provided for this - as shown in the photo.

At the same time, if we want the closet to serve for a long time, it is necessary to do something on the balcony itself before starting work:

High-quality wardrobe makes sense to put only on a glazed balcony. Otherwise, under the influence of precipitation, the tree will not "live" and pairs of seasons.
Before mounting the cabinet, you need to repair the floor of the balcony - especially where the bottom will be located.
Also significantly extend the service life of the cabinet may absence of temperature drops. To do this, we carefully put all the slots on the balcony, and then we carry it out.

When this "required minimum" is completed - you can start making the cabinet itself. Instructions for its manufacture, as well as some useful tips are given in the next section.

Cabinet manufacture

Tools and materials

To make a closet to a balcony from the lining, we will need the following materials:

Brux wooden 40x40 mm for cabinet frame. In order to save it, you can take pine bars (still not visible!), But at the same time, the wood should be dry, clean, without signs of defeat by rot and the woods.
Metal corners for connecting.
Boards or thinner bars for cabinet door frame.
Lining for a cabinet cover, as well as - for the manufacture of doors.
Material for shelves - board or sufficiently thick chipboard sheets.
Accessories for the cabinet - lock, handles, loops, latches, etc.
Fasteners - Self-tapping screws, nails and kleimers for lining.

Note!
If you plan to do a built-in wardrobe from the lining on the balcony (i.e., the cabinet that the rear and side walls protrude the walls of the balcony), then for the fastening of the frame to the walls there will be quite long anchor.

As for the tool, we will not need any complex devices.

An exemplary list of devices will be as follows:

Perfederator or shock drill;
Screwdriver with a magnetic nozzle;
Disc or saber saw;
A hammer;
Level and roulette,

Choosing and calculation of materials

The main task facing us at this stage will be the choice of lining. For the manufacture of the closet, it is desirable to take the lining of the wood of non-massic rocks - oak, ash, linden, etc.

As for the classes class, the higher it is the better the appearance of your cabinet. So here you can guide exclusively by your purchasing power, because the price of the lining is directly proportional to its quality.

Note!
Class C classes is technical, and is not suitable for internal or for the manufacture of built-in furniture.

The queue is determining the volume of purchases. Below, we present an example of calculating materials for the manufacture of the built-in cabinet with a depth of 0.5 m, 1.5 m wide and 1.8m height.

Frame counting on the following scheme:

Lower frame: 2x0.5 + 2x1.5 \u003d 4 m / p.
Top frame: 2x0.5 + 2x1.5 \u003d 4 m / m / r
Vertical racks: 4x1.8 \u003d 7.2 m / p.

In our case, it will be optimally taken 8 bars with a length of 2 m. Each: 4 will go to the vertical racks with minimal waste, and 4 more we will put on the upper and lower frame without waste at all.

As for the lining, the volume of the material depends on what kind of design will have our closet. If the side walls of the cabinet will perform the walls of the loggia, then the lining we will be needed solely for the objects of the doors.

Note!
The rear wall of the cabinet in any case should be done from laminated fiberboard. This material is distinguished by moisture resistance, and therefore more durable.

Montage Karcasa

The cabinet on the balcony of the lining is mounted on the basis of a wooden frame. For the maximum full view of the frame assembly, we recommend that you carefully examine the video attached to this article.

We collect the frame in such a sequence:

At the first stage, we collect the front and rear frame of the cabinet. To do this, connect the bars of 1.5 and 1.8 m using metal corners.
If there is a desire, the OSB plate or thick phanener can be asked to the floor - it will play the role of the bottom of the cabinet.

Note!
You can connect the bars of the frame and without corners, but for this you will need a self-tapping screws with a length of 60-75 mm.

To the rear frame, with the help of self-tapping screws or construction steplera, the rear wall of the cabinet made of laminated chipboard.
The rear frame with the wall attach to the rear wall and fix with the help of anchors, pre-exhibiting in terms of the level.
To the installed frame, the bars of 0.5m bars. Fix the bars by anchors.
To the ends of the BRUSEV fasten the front frame. To give the entire structure of stiffeners, fix the front frame with anchors to the walls, floor and ceiling.
Inside the cabinet, we mount the guide to which the shelves are placed.

Frame ready. It remains only to sheathe our wardrobe with clapboard.

Cabinet clapboard

In most cases, it is the manufacture of beautiful doors from this material. How to make the door from the lining on the closet - we will tell below.

The optimal way of manufacturing the door is the lining of a wooden frame with a wallpaper:

From a fairly thin board we collect the frame, the dimensions of which correspond to the dimensions of the future door.
To increase rigidity in a rectangular frame, add a transverse or diagonal jumper.
Putting the frame to the floor, we apply the lining cut into it in size, and secure it with the help of nails, scoring them "in Putoy".

Tip!
For the manufacture of the door it is better to choose the most thin lining - otherwise the cabinet door will be very heavy.

, I attach decorative platbands to it, handle, and from the wrong side - loop.

When the sash are ready, hang them on, pre-fixed on the frame of the loop cabinet.

Well, the last touch that we need to do, remove the cabinet to the balcony with their own hands from the lining - this is his lacquering. Cover the cabinet with protective varnish to extend the service life.

A high-quality cabinet made of lining on the balcony - despite all the simplicity of its manufacture - is capable not only to become a convenient extensive for a wide variety of things, but also a real balcony decoration. So trying standing!

Residents of small-sized apartments are often faced with the problem of storage of things. At the same time, the balcony is usually empty or turned into a place where unnecessary belongings simply fall. How to avoid littering? The best way to do it is to build a wardrobe from an affordable lumber. Make it is not easy enough, but quite bye for everyone. We present ideas, drawings, schemes, sketches and technology manufacturing of balcony cabinets.

What can be cabinets for balconies and loggias

Cabinets can be of two types:

Cabinet, which is an independent design and is not attached to the walls of the balcony. Such a closet occupies a lot of space, but at any time it can be moved or removed.
The built-in wardrobe, which, as a rule, is created by an individual project, so perfectly fits into all the "uncomfortable" site of the loggia or balcony. But in such a closet, walls of the house are used as carrier structural elements of the structure to which side racks and shelves are attached, so it is impossible to move or remove it without a complete dismantling.

The following varieties doors are used in the cabinets:

doors coupe;
road harmonica;
roller shutters;
swing doors

The final choice of a suitable option depends on the specific conditions. For example, in the loggia you can install the cabinet of the built-in type. In this case, the walls will simultaneously serve as a rear wall. But on the open balcony it is better to put a conventional cabinet.

Special attention should be paid to the choice of doors. If there is little space on the balcony, it is practical to install roller shutters, coupe or harmonica. Swing doors will be more convenient in a large loggia, where the space is not required to save and you can access both the shelves simultaneously by opening the closet. Doors can be installed in the entire height of the cabinet, but sometimes it is more convenient to divide the structure to 2-3 functional zones, each of which will have their own doors.

Swing doors are the simplest and cheaper. For their assembly, only door panels and loops will be needed, and independent installation in the work will not be difficult. Sliding systems are more expensive and time-consuming in the installation. In addition to door cauldons, guides and videos will be required for them. But when opening, such doors do not go beyond the size of the cabinet, which can be attributed to the pluses of such a system.

The most expensive doors are rolling shutters. They are a set made to order, and their assembly produces a manufacturer.

Door options - Photo Gallery

Swing doors - the easiest performed and relatively cheaply, but they are not always comfortable Comfortable and economical option - doors coupe Foldable harmonica door in disclosed form will not take a lot of space Roller shutters as doors on a balcony cabinet - a comfortable, but expensive version

The most suitable and cheap materials for building and arrangement of cabinets

Before starting the cabinet, it is necessary to determine the material from which it will be made. The most popular and affordable materials are considered:

plastic;
Chipboard - chipboard;
wood;
plasterboard.

When choosing a material, usually take into account the overall design concept of the balcony, as well as its own financial opportunities. Plastic is very convenient here - it is practical, combined well with the balcony interior and easy to work.

In the general case, the design of the cabinet is a frame, doors and the so-called stuffing - shelves, drawers, hangers. If there is a side stand, then it will also be necessary for it. Often all these components are performed from different materials.

How and from which lumber to build a frame for a cabinet

Most often, the frame rack for the cabinet is collected from a wooden bar with a cross section of 40x40 or 50x50 mm. At the same time, it is necessary to take into account that the tree changes the size under the influence of humidity - the beam swells, deforming, the joints are shifted, therefore, for unheated balconies, such a closet will be not the best option.

Shelves can be made of thick plywood, chipboard, or OSP. If it is assumed that in the cabinet there will be heavy things that provide the load over 5 kg (for example, cans with conservation, heavy tools, dishes, books), then it is better to use a wooden board.

Original, Beautiful and Simple Building Built-in Furniture for Balcony - Photo Gallery

Long cabinet placed under the window along the balcony, accommodate even more things High duplex cabinet with swing doors and downtown Small locker under the window, plastic Low cabinet under the window, or the cabinet for the balcony will serve simultaneously and the table Comprehensive solution: high wardrobe with doors and open shelves along the loggia Built-in angular cabinet

Ideas, schemes, drawings and step-by-step instructions for assembling cabinets for the balcony

After you have determined which type of cabinet for you is most convenient, you need to start creating the most accurate drawing. Below your attention is offered several developments intended just for installation on loggia or balcony:

The simplest option of the shelving, consisting only of shelves. This model does not imply installation of doors, but you will independently calculate their size and mounted, fixing on the front frame.
The second option is intended for installation in a wide loggia. In such a closet you can store clothes on the hangers. True, put it preferably on the warmed, and better - heated balcony.
The third option will perfectly fit into a narrow balcony, and will also become an excellent addition to the table or a tamba. You can, if you wish, set additional removable shelves on the corners.

After reading the drawings presented, you can easily draw up your project by changing or adding some parameters according to the size of your balcony.

A list of tools required for carpentry work on the arrangement of wood cabinets.

self-tapping screw, dowel, nails;
a hammer;
chisel;
electrolovka or manual hacksaw;
electrode with nozzles for woodworking;
screwdriver (screwdriver);
rule, pencil, roulette, plumb, square and construction level.

Here are some more simple tips before building a cabinet on the balcony:

On a pre-glazed balcony, a wooden finish will not suffer from dampness, the attractiveness and good quality will continue longer.
It is advisable to pre-repair the floor on the balcony, or at least one of its plot on which the cabinet will be installed.
It is desirable to eliminate all the cracks and cracks, insulate the walls and the floor of the balcony, which will ensure protection against temperature and drafts and will significantly extend the life of the closet. For insulation, you can use foam, PVC, or mineral wool.

After the measurements are made, the cabinet type is selected, the drawing is drawn up, you can proceed directly to work.

Stages of self-assembly and installation of the cabinet

Even newcomer can easily cope with this wardrobe. For its manufacture you will need the following materials:

The amount of pine timber must be counted taking into account the selected sizes of the future cabinet. For simplicity, we take the standard sizes that are most suitable for the space of the balcony: the height is 1.8 m, the width is 1.5 m, the depth is 0.5 m. Accordingly, the bar will need:

for the lower frame 2x0.5 + 2x1.5 \u003d 4 m;
for the upper frame 2x0,5 + 2x1.5 \u003d 4 m;
for vertical racks 4x1.8 \u003d 7.2 m.

Laminated DVP leaf can be used as the back wall of the cabinet. This dense and waterproof material will additionally protect the design from dampness, it is attached to the rear frame with a construction stapler, or self-drawing.

First, assemble the rear and front frame of the cabinet. To do this, brush vertical and horizontal bars with metal corners.
Instead of the corners of the bars, you can simply be joined in a tree with a spring-length 60-75 cm long, as can be seen in the photo below.
Then by self-drawing or braces of a construction stapler to the back frame of the frame, attach the rear wall of the cabinet. After that, fix the resulting design in the opening of the loggia with anchors. At this stage, you can use a leaf of thick plywood or chipboard to the floor under the future closet, which will serve as a bottom.
When the frame is installed, fasten the transverse bars on it and fix them with anchors.
The front Rama is attached to the ends of the BRUSEV. After that, fix it with anchors in the walls, floor and ceiling - it will give the structure of rigidity.
It remains to fasten the guides, which will become holders for the shelves. The length of the horizontal part of the guide must be equal to the depth of the cabinet. Make carved shelves cut into guides, if necessary, fixing them with self-draws.

In fact, the simple cabinet is ready. It can be convenient to position almost everything that is usually stored on the balcony: cans, boxes with clothing and small things, tools. It can also be used as book, or to store old magazines. But if there is a need to completely hide the contents of the cabinet, this design can be equipped with doors and tinkering with clay or drywall.

Selection of materials for the sheat and doors

If you decide to strip wardrobe, take the material from the deciduous tree. On balconies and loggias, most often a lot of sun, its rays heat the surface. From this clapping of conifers begins to highlight the resin.

The next thing to consider is the quality of the material. The cost of the lining depends on its variety: a, in or C. Material of a variety and smooth, homogeneous color, it is ideal for the skin, and for the manufacture of furniture. The grade B has interspersed color, small roughness and irregularities, but good in the ratio of "Price - Quality". But the lining grade C for cladding is not suitable: uneven surface, cracks, chips and coarse colors will not give the aesthetics of the finished product.

Note! Since the door of the cabinet should be light, the lining for it is better to choose thin.

Installation of doors on the built cabinet

Use of plasterboard

Instead of the lining, you can use an even simple and cheap option - plasterboard. It looks great on the finished design and it is easy to mount on the ready-made frame.

To begin with, we cut the frame with sheets of plasterboard, cropped in size of the cabinet. Plasterboard is attached to the carcass with self-draws.
After the slaughter of the frame will be completed, you can start finishing. The joints of the drywall will cross the reinforcing ribbon, cover and shry. The surface is stuck, and after drying, cover the water-mounted paint. Alternatively, it is also possible to bust the plasterboard with wallpaper of the balcony interior.
Now it remains to collect doors. In this option, the cabinet is preferable to install the door coupe. Because of the abundance of spare parts, it seems difficult, but the scheme will easily help you understand the task.

Wardrobe Coupe DIY on the balcony - Video

How to equip an angular cabinet made

The advantages of the lining as the finishing material have long been rated by homemade craftsmen. In particular, it is very often crushed by loggia. We offer you not to be limited to this, and from the same lining to construct a convenient and beautiful corner wardrobe. This design will be simultaneously spacious and compact, and it will not block the window.

Stands are not necessary. Enough on the ceiling and semi to nail the bars, and on them to fix the walls.
It is not necessary to make them too wide, just 3 planks for each.
On the walls on the walls, the planks are slapped, to put the shelves from the same lining, cut out on the shape of the cabinet.

From the bottom and on top of the workshop, score 1 plate.
The remaining distances measure, deduct 1.5 cm on inaccuracies.
Measure the lining of the declared length.
The number of powder is welding, respectively, the width of the doorway. In our case, they needed 6 pieces.
Felt them into one cloth with 4 transverse slats and jumper on simple door hinges.

Application of plastic panels in the manufacture of balcony furniture

It often happens that setting the cabinet made of plasterboard, lining and chipboard is not possible. These materials are sensitive to moisture, and make full waterproofing on the balcony or loggia is sometimes difficult. In this case, the plastic panels will come to the rescue. They have a lot of advantages over other materials:

The principle of installing a cabinet from plastic panels is identical to those described above, but there is one pleasant feature. Plastic is a rather flexible material, and you can perform the back and side walls from one wide sheet, bent it in the desired sites. The thick two-layer sheet before the bending is enough to cut one layer. In addition, the sheet can be chopped on the panel of the desired width and fasten them with each other special fasteners.

The doors made of plastic panels are very lungs, they are easy to install. If you don't need to save money for you, you can order on the company already ready-made doors of the required size.

How to make a wardrobe and an end window for a balcony or loggia - video tutorial

Cabinets, shelves and cabinets are an excellent way to streamline space, especially if it is not enough. So, for the balcony and loggia they are necessary. We hope that our advice will help you equip the balcony, make it functional, cozy and beautiful. Tell us in the comments about your experience in the arrangement of such small isolated premises, like loggias and balconies, or ask the questions that have appeared on this topic. Light you work!

In many apartments, especially in the so-called "small mysteries" and "Khrushchev", the layout of the rooms is very inconvenient, and the dimensions are very limited. In such conditions, the hosts connect all their ingenuity to rationally use each square meter of precious locally. For this purpose, mezzanine, storage rooms, niches and, of course, balconies are actively used. So that all things are not chaotically scattered, the best option will be the built-in wardrobe on the balcony of the lining with their own hands.

About Article:

Conditions

The loggia will become an excellent place to store overall tools, skews, skates and other fit things. In such an extension, it is very convenient to store items and things that are used not so often, and there are many places. To do this, equip the cabinet made of lining.

Lining, especially wooden, sufficiently susceptible to temperature and humidity drops. Therefore, in order to avoid possible deformations of the future design:

on the loggia you need to install high-quality double-glazed windows;
tightly suck all the cracks and cracks;
it is desirable to insulate the outer surface of the extension using mineral wool or foam;
the floor of the loggia should also be carefully repaired, and it is better to produce a new high-quality screed, as shown in the photo.

Only after performing these preliminary works, you can proceed to the arrangement of the built-in cabinet on the balcony.

Tools and materials

First of all, you need to prepare tools and materials that will be needed to create such a specific storage. His drawing assumes that the cabinet will be located in a niche, and the three sides will serve as the walls of the balcony. Therefore, reliable anchor bolts will be needed for attaching structural elements.

Selection and calculation

When choosing a lining, you need to consider several important nuances:

this class C is not intended for use in residential premises, so it should not be applied to the luggage of the loggia and its elements;

wooden carbill sheets is better to choose from wood breeds having a smallest resininess - oak, ash, linden;
otherwise, the choice of material depends on the wishes of the owner and finance, which he is ready to spend on it. The higher the quality of the upholstery material, the higher the price, so the choice always remains for the buyer.

The number of required sheat sheets will depend on the design of the cabinet. If only doors are installed in the niche, then, respectively, the area of \u200b\u200bthe sheath will be equal to the total area of \u200b\u200bthe door surface.

Separately, there will be a breakdown of wooden bars of different lengths and cross-section for the formation of a frame. The total length will be calculated based on the parameters of the cabinet - height, width and depth. The same applies to the manufacture of the door frame.

Montage Karcasa

The specific design of the cabinet involves the presence of a frame. Installation begins with the formation of the front and rear frame, as shown in the video:

for this, wooden bars having a length equal to the width and height of the balcony niches are connected to their own hands with each other with metal corners or long screws;
the back wall is attached to the back wooden frame - laminated chipboard sheet, as shown in the photo;
then, the whole design is securely attached to the balcony wall using anchor compounds;
further to the rear frame perpendicularly attach bars having a length equal to the depth of the future storage;
and to the ends of these bars anchor bolts fasten the front frame;
the resulting design is fixed by anchors to walls, floor and ceiling of the loggia, as shown in the photo;
now it remains only with the help of the level and roulette, outline the locations of the shelves, make the guides there and build the shelves themselves.

Sheaving

With the built-in design, it is necessary to beat your hands only the cabinet door. For the beginning, the door frame is mounted. Depending on the two-dimensional or single-handed door, the frame will consist of one or two elements:

A wooden frame is formed from a thin board, equal to the perimeter of the front wall of the structure;
To increase rigidity to the frame, diagonal crossbar is also nailed;
Further, with the help of nails to the resulting frame, it is attached in advance for the desired size of the carbases;
The doors are equipped with handles, platbands and are attached with loops to the main frame.

Let's summarize

Of all the above, we can conclude that the cabinet is not so difficult to create a closet in the niche. But thanks to this design on the balcony will be cozy and spacious, despite the huge number of things stored there. And by making such a miracle with your own hands, you can not only save money, but also make your balcony in interesting and unique.