Baby cot: Master class with drawings and photos

For parents, it is important that their children grow in a comfortable atmosphere, and their sleep has not threatened. If a person has a minimum set of tools and elementary knowledge, then baby bed do it yourself will make it completely easy, provided that there is Photo, sketch of the product, blueprints. The device of such furniture is simple.

Scheme and sizes of a crib for a newborn

Parents know that the baby for the baby especially at the age of the age of four is especially important, because the child sleeps a lot. Proper furniture is a pledge of a comfortable sleep. For small-sized apartments, such a bed in a nursery can replace the playpen.
It is easy to do in two to three days and provide all the subtleties and nuances for the comfort of the child.

Proper furniture is a pledge of a comfortable sleep.

First of all, it is necessary to deal with what elements this design will consist.

• Mattress. It is chosen on the basis of the weight and age of the baby, because it is better not to do it with her own hands, but just purchased in the store. The purchased mattress was developed in conjunction with orthopedists and takes into account all the needs of the body for a comfortable sleep and the correct formation of a children's spine. Mattresses are divided into two main types: on a spring block and without springs. A variety of springs can be on an independent spring block (each spring is placed in a separate bag of nonwoven material and the load on such a mattress is distributed point) and on the dependent spring block (the springs are combined with a metal frame, and the weight of the sleeping is distributed evenly on the entire area of \u200b\u200bthe product).

  

  Comfortable pendant cot

  Such mattresses are best acquired for children from 5 years. And the toddles with a slight weight are recommended products on a blackboard, where the frame itself, as a rule, consists of a PPU or a foam rubber and can depend on the degree of rigidity supplemented with coconut coirs or other materials.

• Frame. This element is done on the basis of the size that is supplied to the mattress of the bed. The material for it most often serves a stranded board.
• Lamel. These parts of the product are designed to support the mattress from below and represent the planks inserted into the frame of the furniture. They form a lattice with a distance between each other about 5 cm (for the mattress ventilation).

  

  Making a baby cot with their own hands master class with drawings and photos

• Sidewalls. They are a fence so that the child does not fall from the crib. Depending on the parent's desires, they can be high or low, solid or carved. Forwards (product backs). On the head of their height will be higher than in the legs.

  

  Drawings and photos of a crib for a master class

• Legs. This element can be made with your own hands or purchased in a specialized store furniture fittings. They can be initially strung on the sidewalls, and they can be screwed to it.

Crib drawing

We are determined with the model

In the children's room most often use several varieties of beds:

• With boxes
• Loft bed
• Bunk bed (if there are two kids in the room)

If the premises of the children's room does not allow a large bed into the room, and a compact model is necessary to save square meters, then it is better to choose a design with drawers. Boxes are used to storing bed linen, toys, children's things and everything that does not fit in the dresser or baby's couches.

Baby cot in two levels for young children

In order for the furniture to be high-quality, it is necessary to choose environmentally friendly materials for its manufacture. The perfect material will be fat plywood or tree. Popular in the furniture industry MDF or chipboard to acquire for the manufacture of the design is not due to the adhesives used in the manufacture of materials. Chemicals can adversely affect the kid's body, causing allergies.

Original bed for stylish interior of the children's room

Tip: It is not recommended to make a crib size less than 1.5 * 0.6 meters, but it is not worth doing it huge more than 1.8 * 0.7 meters. From a small bed, the child will grow rapidly, and if you make it too big, then the baby will not feel comfortable in it.

The base for such furniture is made solid, it can be purchased ready for it, and you can simply use the plywood sheet instead.
Dimensions should be repelled from the size of the acquired mattress. As a base, a lattice can be purchased, but as an option can be used by plywood, as the children's weight is not so big.

The perfect material will be fat plywood or tree.

Wood shield. It is better to use low resin wood, such as birch, linden. The shield size is recommended to take two meters long, 60 centimeters width and a thickness of about 3 centimeters.

On the furniture shield chalk, the future contour of the workpiece in size sketch is drawn. If onboard the design it is necessary to make holes, then they are drawn, attaching a glass for champagne or using an ordinary glass.

Furniture shield and Faneur can be cut by buying in the store. As a rule, in most stores such services have, but it is necessary to provide dimensions in millimeters and patterns. With its own, it is recommended to make it possible to make an electric bike, but if there is no jigsaw on hand, you can cut the materials of the usual saw.

Furniture shield and Faneur can be cut by buying in the store.

After cutting all the elements from the tree, itching with the help of sandpaper, so that the materials are made of the crib, the baby's gentle skin scratched.

If you failed to find corners of aluminum, then they are cut from an aluminum profile. Details of the bed must match the drawings of the sketch. And the length of the corner from the profile must coincide with the long side of the furniture. On these fasteners, holes are made to invent self-sustains. The sidewalls are attached to the beds to the bed lattice or plywood base, and this design is tightened with eight self-assembly.

Original children's bed in the form of a car for a boy

Initially, the parts are fixed on the one hand, then the future blank turn over the side. According to the scheme, it follows from time to time to check the order of fastening of the elements and the location of the parts. In order for the product to be stable and strong, follow the skewers and displacements of parts relative to each other. The bed walls are attached to each other and are tightened if there are no holes in the walls, then they are made using drill.

The framework of the product is ready, it is time to collect a back, which will be located above your baby's head. If you wish, it can be made of any form, the main thing is that this detail of the furniture fully performs its function, that is, protects the baby from injuries.

Carved Wooden Cot for Newborn Baby

Very often small children in a dream raise their head up, so the board here should be at least 10 centimeters in height. Another advantage of high onboard and headboard is to prevent throwing toys and bedding from bed.

Original Baby Cot for Boy

We make a headboard: take a furniture shield, from it, if you wish, you can make a carved back, looking beautiful and noble or decorating. The design of the head and the back in the legs should coincide that the design looks organically.

We make a headboard: take a furniture shield, from it, if you wish, you can make a carved back, looking beautiful and noble or decorating.

We screw the legs to the largest bed, which are purchased in the store furniture accessories. We do it with the help of high-length screws.

All elements of the bed body are additionally polished carefully, up to the slots and cuts, so that the child puts his fingers into the slot.

Tip: Smooth sandwicked surface will be used with a drill with a nozzle or grinding machine.

Decorated polished backs are attacked with a frame frame. To the fasteners not visible, they are drilled from below, directing the drill. The cutting of the holes should be as neat as possible, because this item is easy to damage. We make a hole under the screed yourself, the drill in this place will be difficult to do it. If the wood for making a bed is soft, then the hole is easy to break.

So that the fasteners are not visible to be drilled from the bottom, directing the drill

The bed configuration assumes that storage boxes are not attached to the frame of the bed, but have a type of roll-out tumb. Drawers should be supplemented with wheels so that the storage capacity for storage has rolled out.

Stylish Wood Cot for Baby

If the owner of the apartment decided to change the configuration of the crib so that the boxes are put forward, then the bottom rack is attached to the bottom of the workpiece, and the product itself will stand on the side planks. In this case, the sidewalls are made higher than intended earlier by several centimeters, equal to the height of the boxes. The retractable box itself (drawer) is placed on the guides.

Wooden crib for bright and spacious room

For the boxes, we take a plywood with a thickness of 1.2 cm, cut down the bottom and walls of the box, tighten with a self-drawing. Additionally, the box is glued, because things in the box are loaded on the design. Attach wheels at the bottom of the collected box.

Light spacious room with a crib

The legs on the bed, if it is decided to make them self-masted from the remnants of the furniture shield or from cropping a square of a square shape. Fasten the legs to the frame of furniture with self-draws.

For the boxes, we take a plywood with a thickness of 1.2 cm, cut down the bottom and walls of the box, tighten with a self-drawing.

Decorating the bed

When the works are completed, it is recommended to give the product a finished look. It is recommended to pass the upholstery cloth for furniture. Pre-from the fabric cut the parts by 2-3 centimeters more of the main parts and pass overlock so that they do not appear. The fabric is fastened with a furniture stapler, and its cuts are hiding inside the crib, so as not to spoil the aesthetic type of design. During decoration, the fabric is stretched so that the races, folds and bubbles do not appear.

Crib for the smallest family member and small bedroom

Another finishing option will be lacquering a skeleton of a crib, headboard, backs in the legs. To do this, it is recommended to use quick-drying varnishes on a water basis. More environmentally friendly for furniture in the children's room will be machining a verse. Previously all the details are recommended to sand and polish the drill with the nozzle.

For the decorative type of drawers, their facades make bright panels of MDF or LDPS blue, pink, light yellow, lilac and other colors.

Bunk bed do it yourself