Homemade and useful tips. Mastery useful homemade for giving. Collapsible garage crane-beam

Nothing brings joy into the house as a thing created by her own hands. True, different homemade for the house not only fill life bright colors, but also give the interior uniqueness and some highlight. And certainly about such a thing (let it be a little bauble) it is impossible to forget. And it is not so important that it is homemade wood for home, from paper or plasticine. Options and methods of manufacturing various things - millions, and today we will look at a few of them. So, how to make interesting homemade homemakes?

Shelf of tin jars

It would seem that such a little thing is a jar of coffee. However, even from it can be made a beautiful, comfortable and useful shelf for storing economic stories. Often in such tanks are kept various souvenirs and memorable photos. Practical benefits from this homemade a little bit, but such jars look very harmonious.

Details about the procedure for making this craft

1. First, in the jars, the drill or a special knife-plowing holes (in the upper and lower 3, 3, and in the walls of all others are 2 points).

2. Next jars are bonded among themselves. Nuts and short-sized nuts are used as fasteners. By the way, to obtain the desired (beautiful) result, you will need to have at least 5-6 such jars.

3. After in the tanks, a hole under the screws is made. In the bottom of the jars located in the upper part of the design, 1-2 holes for fastening the shelf to the wall are made. Finished homemade is screwed by a screwdriver or a screwdriver. For this, a dowel is driven into the wall.

Everything, now homemade for the house is introduced into the case. Be sure - a different little thing in such jars is definitely not lost. Thus, you kill two hare at once - decorate the interior and get rid of the mess in the house.

Homemade for home - how to make a clock on a CD / DVD disk?

The clock on the CD is also very interesting and original option Interior decorations.

As you can see, design this device It is very original, and therefore it will be organically looked against the background of any interior (perhaps it will become its highlight). Made such "smart" homemade houses for the house in minutes. In more detail about all stages, we will tell you a little lower.

So, how to make homemade hours do it yourself? To begin with, you will need to prepare the appropriate materials - CD / DVD CD (the design of its front part is chosen at its discretion) and the cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the latter item does not have any chips and scratches. To facilitate the work, you can purchase ready-made clock and then simply replace the standard dial.

Must be a shooter, otherwise the homemade will not work. You should also make numbers. Their total of twelve pieces should be. It can be cardboard, paper, or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of skin or tissue and superchalter type "moment". The main all this design will be the CD. We will redo it in the first place.

First you need to place a disc for twelve equal parts and glue the numbers on the marked points. At the same time, the sectors should not go for outside diameter Devices. How are homemakes are made for home? After the sectors, proceed to the hour yourself - remove the arrows and place them exactly in the center of our disk. By the way, in front of their fastening, you can stick some interesting photo on the disk, which will make the design of the clock even more original.

To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue on them and gently arrange the item exactly along the entire surface of the filling elements. The same shooter mechanism is attached to the back of the disk.

What to do next?

So, the base of the clock is practically ready. The next step is to do the holes in the device along the contour of the shooter. The field of this disk is installed in the case. The mechanism itself is displayed out through the hole and closes tightly. Now, with the help of wire, the stop is made, which is glued to the back cover. So that it is more durable, rushing a piece of fabric or skin on top of it. It will make the emphasis not only strong, but also beautiful, since the extra part of the wire no longer gaps on the clock as before. All, homemade hours from the CD successfully manufactured. It remains only to insert a battery of the AA type and set the time. By the way, the battery can also be made with your own hands.

How to make an energy source from lemon?

As we know, this fruit contains a lot of acid, respectively, with the correct actions, the lemon can be turned into a real mini-battery.

Of course, the charge from such a "battery" is not enough to work household appliances, however, for functioning or charging mobile phone This current is quite enough.

We make homemade homemade - Preparing tools for transformation of lemon into a source of constant energy

In the course of the work you will need such tools like a knife, soldering iron, drill, iron pin, as well as several pieces copper wire In isolation. Among other items, it should be noted the need for a single glass or winery, a couple wooden sticks And the same number of stationery buttons. And, of course, the main source of energy we will have lemon. An orange can also be applied, however, the acids in it are much smaller, so the charge will be minimal.

Instruction

First, lemon is cut in half. It is necessary so that it gives more acid necessary for lemon is fixed in the glass so that it does not ride on the table. Next in its pulp, copper and iron pins are inserted throughout the perimeter at a distance of 0.5-1 centimeter. "The minus" we will have an iron, but "plus" -med.

All pinways are attached to the wires of the wire. They will perform the function of the power supply connector. All items are connected sequentially.

At the final stage, sticks are inserted into the battery compartment. It is important here to observe the polarity. Contacts are pressed against the contact group. The container remains open throughout the device charge process.

So, we found out how to make useful homemade For home with your own hands. Successes in your endeavors!

Since you decided to become a self-taught electrician, then surely after a short period of time you will want to make some kind of useful electrical appliance for the house, car or giving your own hands. At the same time, the homemade can be useful not only in everyday life, but also made for sale, for example,. In fact, the assembly process simple devices At home does not represent anything complicated. You just need to be able to read the schemes and use the tool for radio amateurs.

As for the first moment, before starting to manufacture electronic homemakes Do with your own hands, you need to learn to read the electrical strokes. In this case, our good helper will be.

From tools for beginner electricians, you will be useful for a soldering iron, a set of screwdrivers, pliers and a multimeter. To build some popular electrical appliances, it may even be needed welding machineBut this is a rare case. By the way, in this section of the site, we even told the same welding machine.

Separate attention should be paid to the girlfriend, from which each electrician newcomers can make elementary electronic homemakes with their own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, novice radio amateurs and electricians are enough to search all requirements In the garage or shed in the country.

When everything is ready - the tools are assembled, parts are found and minimal knowledge is obtained, you can proceed to the assembly of amateur electronic homemade at home. This is where, our small reference book will help you. Each granted instruction includes not only detailed description Each of the stages of creating electrical appliances, but also accompanied by photo examples, schemes, as well as video lessons, in which the entire manufacturing process is clearly shown. If you do not understand some point, you can clarify it under the recording in the comments. Our experts will try to advise you in a timely manner!

Interesting homemade For giving waiting for you in this article. You will learn how to make a lawn mower from the old washing machine, make a sink, country souls, dryer from priest materials.

Useful homemade for summer cottages - washing with their own hands

Not everyone has a financial opportunity to buy car "Karcher". If you can not buy it, why not invent? Homemade washing will allow you to do without water supply, reduce water consumption and wash the car thoroughly, fence, garden track or other items.

That's what you need for such a homemade for giving:

• plastic canister with a capacity of 5-20 l;
• set of hose connector;
• nipple automobile;
• cut of the hose;
• silicone sealant;
• acute knife;
• compressor or car pump;
• pistol for watering.

Take a set of hoses, which include 2 connector, 3/4 threaded fitting, 1/2 transitional coupling.

This is the principle of operation of such a homemade for the cottage: you can connect a gun with a hose, attach this device to the bottom of the canister. Nipple will be built into her neck.

Fill the container with water, but not to the top. Then tighten the lid and pumped into the air. The pressure will be created here, and water will run well when you will press the pistol trigger. That's how to assemble such a mini sink.

Carefully knife tip Cut the hole in the lid. It should be slightly smaller than the diameter of the legs of the nipple. Also ride a circle the desired diameter At the bottom of the sidewall canisters.

Insert nipple into the cover.

Now, helping yourself with a wire, put the coupling to the hole intended for it. Apply the silicone sealant to fix the seat of the coupling with Cannis.

It is necessary to spin the lid and carry out the rest of the work only after the complete soot of the sealant. Then you connect one end of the hose to the water pistol, and the second to the canister.

Pour into the water capacity, but not to the wind, so that the air pumping place remains. But do not pump a lot so that the canister is not deformed and did not burst under pressure. See how the fitting should be twisted and connectors are installed.

If everything is done correctly, then when you press the water pistol, water will beat a good jet. The pressure you can adjust, tiping the pistol tip.

In the country, you can hardly do without a soul. Try to make it unusual, and tropical, then you can enjoy even more water treatments.

How to make a tropical shower of girlfriend for giving?

If you just recently purchased the site and you still do not have a wave room, then you can take a shower right on the street, storing small territory near the fence with a curtain. To make such a tropical shower, you will need very few components, it is:

• bracket;
• wire;
• flexible hose;
• metal beer bank;
• hose adapter;
• awl;
• nails.

Substitute a metal bracket on wooden fenceso that the device happens on the desired height. Screw to the tip of the adapter hose, lock it on the slots of the beer bank. The location of the connection can be treated with sealant. With a selection, make a set of small punctures in the bank.

Tie the top of the hose with a wire to the bracket, and the second end attach to the water supply or pump. When you omit the pump in a barrel with a warm water, you can make pleasant water treatments.

You can still make a nozzle for a tropical soul using a container from disks as it. In his center you need to fix the plastic adapter, which is attached to the shower hose, and the central axis of the disks must be removed. Using sewing, make up the hole cover. All attachments are well a sealant. Such a nozzle on the bracket is kept with a thick wire or on a rigid tube.

If you have a desire to make a tropical shower, then you can use plastic pipes for this.

They need to bring water to them, pre-make a lot of small holes with a soldering iron, and then enjoy clinging drops. We like such water procedures to children.

But do not forget to pre-check the water in the containers from which it will fall into the shower, she must warm up in the sun.

And to do stationary soulsYou need to pre-pour water into the tank or in the barrel, which will be located under the roof or on the roof of the structure. On a warm summer day, the water here is well warmed, and you can wash it away. To be able to do this in more cool weather, then the heating system should be provided in such containers.

Dunny shower with their own hands

Before installing it, you need to make a shower cabin. If there is an opportunity, you can make it out of wood by installing this small structure on the basis. Put wooden door Or limit yourself to such a shower curtain.

There are more simple options. If you have a glued cloth, then use it.

Another option is to purchase fabric with impregnation or use the old awning or a tent.

If you did a fence from the corrugated floor and you have materials remained, then try to make a shower for giving of them. Metal pipes It is necessary to wear on the markup, pour them with concrete. When he dries, the trimmed sheets of professional flooring welded. One of them will become the roof.

If you have little wooden boards, then embody the option shown in the next photo on the right. And on the left shown shower, which is made by type of shoulder. So the materials for it will cost almost free.

When the shower is ready, you can install the water capacity on it. So that she better warmed, you can make a kind of coil from metal or from the hose. Then the water will warm up more active.

These and other homosexuals for giving allow the maximum to use the existing containers.

To be able to get warm water even when it is not heated by the Sun, use electrically heating. For this you can plastic barrel Locate vertically or horizontally. Then you will need to build on one side of the Ten, and on the other? Water bay fitting. Make a hole overflow to extra fluid It followed and you saw that the container is already full.

Now it remains to install the tank. Usually for this use the roof of the shower. You can put a flat tank made from iron or plastic. You can also make a canister for a soul made of metallic or iron barrel. If you need to warm the water, then the heating element is mounted in the barrel.

Familiarize yourself with other examples of what can be done on panstone do it yourself.

Interesting homemade for giving with your own hands

Garden tools are very necessary for work on Earth. Often in the store sell not very high-quality sets. After brief use, the shovel rolled the handle, or the chuckles are twisted. Therefore, if you have the opportunity, try to make the tools with your own hands.

Take:

• cutlets;
• fragment of the plumbing pipe;
• trim from two-handed saw;
• screws;
• screws;
• fragment of the profile pipe with a cross section 3 cm.

Using a grinder, cut a piece of pipe. Taking the lever tool, you need to cut the segment of the pipe, break the sector and in the place where it will be a stalk, you need to work with a hammer to give future chipping the desired outlines.

To make the blade, take the cutting of the two-handed saw and draw the outlines of the future chipping. Tear two holes.

At the same distance and the same diameter you need to make 2 holes on the roast itself, and then cut a fragment from the two-handed saw.

Drill these holes with a drill and a drill created for metal work. Connect these two parts using rivets, which uses screws.

Now drill a hole in the upper part of the chief to then attach a stalk here.

Make a scoop that is very interesting to work on the beds. Then such homemakes for giving will allow you to find a very durable set of tools.

Spile the gluttony piece of the cutlery and begin to bleed it into a chisel.

Then, helping yourself with lever tools, break this part almost completely.

It will stay to work with a hammer that the scoop blade acquires the desired form. Using a felt-tumbler, draw the outlines of its working part and cut off the grinder.

With the help of an abrasive circle, clean the edge of the shovel and make them more even. Now handle the tool to the emery petal circle. This shovel will become such a brilliant.

Also drill in it a hole under the cutlets, then insert it and secure the screw.

Cover the cuttings of both tools with antiseptic, and then - varnish. Now you can use tools for destination. If you want, on the same principle, make a ripper for beds.

Very fascinating to create similar things for giving with your own hands. Maybe after you make tools, you will want to make a device on which you can dry part harvest collected. See how one gardener did.

How to make a dryer for fruits and vegetables?

See what materials you need to take:

• sheet metal;
• square pipes;
• locking mechanism;
• polycarbonate sheet;
• self-tapping screws; screws;
• 2 door hinges.

But what tools need to be armed:

• bulgarian;
• welding machine;
• drill;
• stationery knife;
• roulette and marker;
• scissors for metal;
• hacksaw.

First you need to make the basis for the drying locker. Make a frame from square pipes. Horizontal I. vertical stands Scramble so that the edges are smooth. And the tips on the connecting elements should be mowed.

The door here will be metallic. To make it, cut off from iron pipe 4 fragments and weld them into a rectangle. Then you need to strip this base with metal using screws with nuts and screws. If there is an opportunity, breed a steel sheet. To make a mount for the baking sheets, attach with back side Frame wooden bars. Take a self-tapping screw. In this case, each lateral is available on 4 wooden Brucks For 4 kids.

Absorber is installed in the dryer. Take metal sheets and paint it into black. Use heat-resistant paint. When it dries, put this workpiece on the bottom of the dryer.

For the absorber, take a thick aluminum or copper sheet, in extreme cases, steel. These materials are well carried out heat.

Now you need to see the dryer outside, make the roof transparent, from polycarbonate. Then here will penetrate well sun rays. You can also use glass. Close the ventilation windows mosquito net.So that insects do not fly here.

Attach the loop and lockable mechanism to the door. Attach the door to the place. See what a wonderful beautiful and spacious dryer turned out.

It remains to do the opponents. They must pass the air. First, roll the frames from bars, and then attach a metal grid to them.

Now you can cut fruit and watch your device work. Put the thermometer in the dryer to keep track of the temperature. It must be within 50-55 ° C. At a lower temperature, close the lower holes, putting a rag here.

In such homemade dryer You can dry not only fruits, but also vegetables, spicy greens, fish, meat, root.

If this device diagram of such a device seemed difficult to you, then you can make a dryer from a metal barrel. It cuts out a hole for the door, and the racks from the metal grid are inserted inside.

So that water does not register and it was better to ventilate, the roof is installed on top.

You can upgrade this device by installing inside the fan and an electrical heater.

If you want to make a lawn mower with your own hands, then it is also possible.

Turn into it old washing machine, for example, this is such.

And if you still have an old bedside table, then you will make a platform from it for the future of almost self-propelled device. But only the door is needed from the bedside table.

In the center of the engine shaft drill holes. Make a cutting knife from the old two-handed saw. You must freeze from it in size necessary form, Cut in an induction inside.

Attach two wooden stakes that will become handles of the mower. Do not forget to fix the motor and extension to it. Now you can experience such an interesting unit.

If you are interested in other homemade for giving, then you will be useful to see the next video.

Lots of interesting ideas Waiting for you in the first video.

And with steep homemakes from plastic pipes You can get acquainted if you look at the second story.

Make your home much more comfortable crafts made from old items and things that can be returned to the second life. Some manufactured homemade for household With your own hands, you can significantly save home budget, facilitate work or make the surrounding interior more interesting. And even if difficulties arise in the process, their overcoming will cost.

Homemade homemade workshop

Almost in any house there will always be any set of instruments necessary for the economy. But sometimes there are situations when to work in your own workshop or garage requires any device, which is no longer possible to purchase in the store or it is very expensive. In this case, the output can be found by making it yourself.

Blacksmith Mountain from Callon

This device for heating metal will be an indispensable assistant In a domestic workshop. Mountains can safely use for the manufacture original items via art forging. It will be truly unique forged items.

For the mining, it is best to use an empty gas cylinder with a capacity of 25 liters. Its ends are cut by a grinder, and the door of the mountain and its rear will be made of the cut-off pieces. The inner part of the balloon is covered with a refractory ceramic wool, which is capable of withstanding the temperature of more than 1200 0 C. From above, it is cooked chamotte clay (fuled), withstanding temperatures up to 1500 0 C. On the bottom of the mountain after a lining, chamotte slabs or refractory bricks are stacked.

The hole is drilled on top and a small slight is inserted, which allows inserting a nozzle of a burner burner, which can create in a mountain temperature more than 1000 0 C - is quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane-beam

In the manufacture of such a lift, cash spending will be much less than buying a factory model. For its manufacture, you will have to spend only on materials, half of which may be found in the garage.

Materials required for lift assembly:

1. Two racks - profile trumpet 100x100x2350.
2. Cross rod - steel pipe arbitrary length with a diameter of 100 mm.
3. Four rod supports - profile pipe 100x100x600.
4. Base and discontroll - a corner with shelves of 100 mm.
5. Two metal rollers for cable.
6. Four wheels for movement.

For lifting mechanism it is best to use manual winch With worm transmission with maximum load up to 500 kg, which is attached to one of the stracks of the crane beam.

The design does not take up much space in the workshop, easily moves through solid coating and is quite convenient for removing the engine from the car.

Mobile instrumental stellage

The main highlight of this rack is his small size , but at the same time it can be placed on it a large number of Tools, and if required - quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when conducting construction and repair work in large roomsEspecially when you need to carry out tools often.

The rack can be collected on the basis of a collapsible rack of plastic installed on a homemade platform with wheels (trolley). The platform is manufactured clearly under the size of the rack from metal corner With the shelves of 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. For movement, furniture metal wheels are used.

To the rack additionally you can make and fasten the mounts for building levelsExtension cords and other tools that can be stored in a hanging position.

To help hostess

There is no financial opportunity to buy, for example, any of the new furniture in the furniture salon or make an order for its manufacture. But you can always get out of this situation, making the right thing with your own hands, while making it attractive and unique, using remedies for this.

Kitchen Apron from traffic jams

The kitchen apron is a wall surface between the worktop and mounted cabinets. Usually this part of the wall is facing tile. But for its coverage it is possible to apply many other materials, for example, gluing wine plugs on the wall.

Such an exclusive decor looks pretty great.

Before the sticker, each plug is cut along a length of two halves with a sharp stationery knife. The wall is preferably painted in black, which will emphasize the seams between the corks.

Corks are glued on the wall using liquid nails In a checkerboard, either with a specific pattern, as it is ideally exactly possible to lay out, and the twisted rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but quickly dumps and are poorly laundered, so it is best to close them with a glass screen from a calene glass. True, it will have to spend a little to spend a little and order glass in a special workshop, where they will cut it on the specified size and make holes for sockets and fasteners.

Glass fixes to the wall anchor dowelsthat can be purchased almost in any construction store.

Although apron, decorated wine plugsmay be expensive, but the result achieved will cost this.

The surface of the table top, as well as the wall, you can decorate traffic jams and cover with rotable glass.

Hinged folding table

Fastened on the wall folding tableiK Allows you to save some square in the apartment. In the crowded state, it can perform from the wall at a distance of no more than 10 cm and does not interfere with anyone, but in the unfolded form it can replace a full-fledged table.

Options where you can use a hinge table fixed to the wall, a lot. Here are just a few of the most basic:

Shower for dacha

Probably nothing is better than refreshing under the jet of water hot summer day, especially if he passed the work in the garden. Naturally, only the souls will solve this problem and remove fatigue accumulated in the day.

The shower can be installed on their own without attracting assistance, the main thing is to choose the place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showerwho can freely build on their own:

Installing a simple shower is made in this way:

1. The frame of the shower cabin is manufactured, which can be collected from the metal, wooden bar or other healthy materials.
2. A metallic or plastic water container is installed on the roof of the collected frame, which can be from 50 to 200 liters.
3. Metal capacity is desirable to paint black for better water warming up. Additionally, several heating electric tanks can be installed in the container, then the shower can be taken in cloudy weather.

Cabinet can be seen by boards, plywood, slate or simply cover with tarpaulo or cellophane film with folding pads.

For construction on their own

The topic of construction or repair, probably, worries everyone. And, of course, everyone who does it wants to end it with minimal financial costs. Therefore, if you want to save, you can make some materials for construction own forces. For example, it may be a wall sip-panel or such useful toolAs vibratinglitis, the need for which often occurs in many landlord owners.

Homemade sip panels

For their manufacture, you need to prepare a flat rigid platform. Putting a sheet of OSP with a thickness of 10-12 mm on her rubber spatula With the teeth, apply glue on it.

Then to glue the sheets of foam of the brand 25-30. After that, on top of the stacked foam, the adhesive mass is applied to the bottom slab, and the second sheet of OSP is stacked on top.

If simultaneously is made by several stacks stacks, work should be performed quickly until the glue is freezing. Usually in this way you can prepare for more than 4-5 panels at a time.

After the workpiece for the formed plates you need to create pressure using the press. Since at home, naturally, hydraulic press No, it can be replaced with a thick plywood sheet laid on the harvested sip-plates throughout the plane and twisted for 2-3 hours, for example, several bags with cement, sand or other cargo. You can take advantage of even passenger car, Having stopped by plywood sheet According to the pre-made overpass.

After the glue is finally dried, the homemade panels will be ready, they can be folded into a separate stack and begin in the workpiece of new panels. Made panels should be left without cargo still, after which they can be used for their intended purpose.

Production of vibratinglitis

To make homemade vibratinglitis, I will need to cook:

1. Electric engine with an eccentric of the brand IV-98E, which is the main part of the vibrating plates.
2. Steel sheet, a thickness of at least 8 mm in size 450х800 mm. It can be ordered on any metal bondage.
3. Two slices of chapellery long no more than 400 mm.
4. Inch tube For handle and two rubber bushings for its attachment.
5. From the tools you will need a device for welding, Bulgarian and a set of wrench keys.

From the narrow sides of the plate, retreating from the edges of 80-100 mm, make an incision with a grinder about a depth of about 5 mm. After that, get the edges in the direction of the outbreak at an angle of about 25 0 and weld them. The bend is needed so that the vibratinglitis does not immersed in the material that seal it and fluently moved along its surface.

Then across the plate at a certain distance designed to fasten the electric motor, two channels are welded with shelves down. Through in advance drilled holes In a channel, with the help of M10 bolts, an electrovibrator is attached to them.

The handle made from the pipe is attached to the vibrator through soft rubber bushings, which can be bought in the auto parts store or in a construction store in the fastener department.

Thus, you can make a lot of useful things useful in the farm, having spent only part of the money that would have to pay when buying finished product. We just need to make some effort and have certain skills.

The summer cottage is the territory where it is possible to give itself freedom to carry out numerous experiments and torturing. This is manifested not only in the interior design, but mainly in the design of the garden or the garden. The inventive and ingenious hosts have long been not guided by expensive and standard methods For the arrangement of its sites, since there is a lot of alternative solutions in fact for all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Non-standard designs - an excellent opportunity to create interesting design Garden, garden, cottage plot.

This variety of beds in most cases is used for cultivation decorative plants Or spicy herbs.

Materials for manufacture:

The length of the drainage tubes is regulated in accordance with the wishes of the landlord. However, it should not be made bulky beds, because they may complicate movement on the territory.

Creating a garden

Stage 1. Create a container. To do this, we take the drainage pipe, cut down along and put on two sides with special plugs.

Stage 2. We take prepared metal holders, put them on the resulting carcasters for the beds.

Stage 3. We do in the pipe hole. They are made in those places where metal fasteners will be.

Stage 4. Delighted through the cable holes made or durable rope.

Stage 5. Fix the cable / rope with fasteners.

Step 6. Fill out the seeds obtained by clay and soil.

Stage 7. Look at the garden beds.

Stage 8. Let the pipes to the selected place. Sometimes there is a special wooden crossbar for this, or rather the design in the form of the letter "P".

Stage 9. Alternatively, you can make a special design for pipes.

Important! The gardening from the drainage tubes is not distinguished by resistant to a strong impetuous wind, so it should be selected for it, which is not blown away from four sides by the winds. Otherwise, the frame quickly collapses, with all your efforts.

The garden, made of a plastic bag, is another modification of vertical beds. It is extremely compact, functional and interesting outwardly. You can make such a bed in a couple of hours.

Materials for manufacture:

• durable polyethylene film;
• sewing machine;
• priming;
• seedling.

In order for the garden to succeed, it is recommended to pay special attention to the thickness. polyethylene filmwhich in this case will perform the "frame" design. Minimal thickness Films - 0, 2 millimeters.

The process of creating a polyethylene bed

Step 1 . Cutting 2 rectangular segments of the film, the size of which corresponds to the size of the generated bed. For each side, you should leave the allowance equal to one and a half centimeters. The recommended bed diameter is twenty centimeters.

Step 2. We cross the rectangles among themselves, leaving unconceded only the top of the bag.

Step 3. Send a handle to the future bed, the strength of which will allow to withstand the weight of the bag filled with soil. It should also be considered that when watering the weight will increase.

Step 4. Fill the bag of fertilous land.

Step 5. Make horizontal cuts on a bag in twenty centimeters. They are needed in order to plant seedlings in bed.

Step 6. Space seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple actions, you can get cheap and useful beds.

An integral element of each country area is a compost pile. This is a place where all sorts of biochemical reactions occur, providing fertilizer creation.

To create fertilizers that will satisfy all requirements for them, you should thoroughly consider multiple key steps: creating a container and directly proper manufacture Compost himself. We will tell about each of them.

Stage 1. We take eight reference columns of the same length.

Stage 2. Processing low part wooden columns motor Oil or tar.

Stage 3. Drop the columns to the ground so that they are reliable and stable. If a computer box It will be located next to the fence, then 4 columns (that is, one side) can be attached to the fence. This will avoid the need to dig 4 yams.

Stage 4. Between each two neighboring columns you feed the crossbars in such a way that in the end it turned out three independent sections. Be sure to leave the slots that will perform the functions for ventilation holes.

Stage 5. In two sections, horizontally nail the boards up to half the pillars height. In these places it is assumed to create two small doors.

Stage 6. The remaining section will be a large door, so you should navigate only one board. It should be located at the very bottom in a horizontal position, that is, as ordinary crossbar.

Step 7. Install the covers. To do this, you can use one large one-piece board.

Stage 8. Install the workpieces prepared in advance.

Stage 9. We provide doors with handles and leaks.

Stage 10. We process wood using special impregnations.

Stage 11. Color the box in any color that matches preferences.

Many gardeners mistakenly believe that any components can be hung in a compost bunch. In reality, "ingredients" should be carefully chosen to create the right biotrement.

Among the obligatory components composted Kuchi. The following components:

• peat;
• ash;
• needles;
• tree branches;
• leaves;
• hay or grass;
• wood ash;
• roots of plants;
• raw vegetables and fruits, etc.

All items in randomly mixed in a heap. To accelerate chemical reactions, it is recommended to cover a bunch of tarpaulos (this is especially true in the absence of a box).

A trip to the cottage with the family suggests the presence of entertainment elements on the site that will delight children. The most common way to take young dachensons are swing.

To build a swing on your own - the task is not easy, but quite perfect. Of course, you can always take a stick, tie it with a rope and hang the design on a tree, but it is difficult to call full swings. Real craftsmen prefer to build comfortable designs with a comfortable seat for seating.

Constructive components:

• two logs;
• durable rope.

Indicators:

• log diameter - 85 mm;
• length logs - 700 mm;
• distance between ropes - 500 mm.

Creating a swing

Stage 1. Extend the ropes between the logs.

Stage 2. Watch the ropes each log.

Stage 3. We release the rope out.

Stage 4. Tighten the ropes on 3 nodes.

Stage 5. Fix the swing on the tree.

Important: Such swings are calculated only per person.

Garden Material Garden

There are several types of garden tracks that can easily be done with their own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Will withdraw the space with corrugated stripes.

Step 4. Color the paint path.

Step 5. Sprinkle a stone crumb.

it economical option For those who do not want to break their head and spend time on a full-fledged garden path. The tire track is usually used for gardens, as it is easily fit into the ground.

Stage 1. Drag the plugs in different colors.

Stage 2. Dump a small trench.

Stage 3. Drive support to strengthen the future track.

Stage 4. Construct formwork using boards.

Stage 5. Install the struts on the edges of the trench.

Stage 6. We put in the ridge of the trench crushed stone and carefully tamper.

Stage 7. We make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press the traffic jams in an arbitrary order. It is interesting to watch even colorful stripes.

It is the simplest and fast methods Make a garden path, not acquiring expensive materials.

Tools do it yourself

The expression "in the farm will use everything" turns out to be more relevant when we are talking About canisters. From this plastic container, you can make a large number of indispensable tools that are actively used in the process of dacha.

For the manufacture of this tool, we need only a sharp knife and directly container.

Stage 1. Cut the bottom of the canister.

Stage 2. We note on the container the cut line for the scoop so that the knob from the canister is a handle of the future tool.

Stage 3. Cut off the extra material.

Due to these simple actions, we get a great scoop with a comfortable handle.

Materials:

Manufacture

Stage 1. Carefully my canister so that there is no smell in it.

Stage 2. Cut the vertically to the canister into two parts.

Stage 3. On the table, we make a groove using a woodworking machine.

Stage 4. We apply glue to the Faneur and insert the canister into the lower part.

Stage 5. Color the resulting shelf with a canister.

Of course, such a design will not withstand greater weight, but it is quite good to store small parts.

Materials:

• 40 kanisters;
• scissors;
• rope;
• paper;
• marker.

Stage 1. I pierce the top of the canister.

Stage 2. We make stencils from paper.

Stage 3. Apply it to the canister, we supply the marker.

Stage 4. Cut large holes with scissors.

Stage 5. We fold the prepared canisters into several rows, taking each row by waying the rope under the tank handle.

Stage 6. We reinstall all the rows around the perimeter for greater strength.

Stage 7. If the cabinet is planned to lean to the wall, then weiss it to the surface.

Stage 8. We put heavy items in the lower row - stones or bricks.

The result is quite a spacious and functional rack that will help get rid of the question of storing many small details.

Be destroyed and bold in the incarnation of your ideas. Good luck!

Video - homemade for giving with their own hands

Video - do ourselves for giving