How to make a bench: Original ideas (drawings, photo reports). Wooden bench do it yourself: how to decorate the household plot (54 photo ideas) Bench for the garden - photo ideas

In the country area, I really want to have a corner where you can relax and enjoy nature. Such a place is impossible to imagine without a beautiful bench. Made a garden bench with her own hands will be able not only to save money, but also to carry out individual needs and ideas of each, because there are quite a lot of options and techniques for its manufacture, and you can choose suitable for yourself.

Step-by-step circuit assembly of a garden bench with a table

How to choose a place to install a country bench

Before you begin to independently make a bench, you need to carefully approach the question of where to place it. This issue should be done because the bench is not only an object for the convenience of recreation, but also the place where a sufficient large amount of time will be carried out, and therefore the view and the atmosphere should be suitable. In addition, from the selected area to install a garden bench, as well as its type, will depend on its design and the installation process.

Examples of the location of garden benches from the designer solution.

Bench for garden cottage combined with a forging in the frame. Bench of logs with stone base.	It will very harmoniously fit into the garden, in which trees are growing with large crowns, various fluffy shrubs.
Romantic Style Bench, Openwork	Good for accommodation is a garden of young trees or a vineyard.
Miniature bench painted white	Ideally will be it in contrast with a thick lively rich in a rich green color. Also a good option for such a shop will be a pond, blooming flower beds or simply in a secluded corner, separated by flowers.
Retro bench from the "old" tree	It can create a very mysterious atmosphere together with nearly old trees bent trunks, near which flowers are planted different types.
Bench combined with decor objects	A very popular location of the bench is a veranda or gazebo. In this case, the garden bench must be performed in similar stylistics with the already existing decor and the veranda or arbor.
Combined benches and table	This design is good will be on a small spacious plot of land, which can be decorated with floral vegetation, can also be located near the house or under a canopy.

In addition to the listed options, you can install a bench in a place where children are usually carried out, which will allow them to be near them when they play. Especially good will be organized place for recreation, if there is a lonely tree on the site, which has a scattered crown by setting the bench right under it.

In addition, can be organized near the house canopy, under which to put a garden bench. It will be a good holiday destination even in rainy weather. There is another option to simply determine the place of the bench at the ridges, where the harvest is grown - it will be comfortable for relaxing between work in the garden.

IMPORTANT: It is best to choose a place to accommodate in such a way that there are no annoying objects or buildings, garages, fences and the likes in the field of view. It is worth remembering that the view should raise the mood and promote relaxation, and not be a reminder of how much the work remains at the cottage.

Options and ideas for the embodiment, which can afford to implement a Great Bench made a Great Bench. It is quite simple to come up with a decorative composition with her participation, for example, it looks good on elevations, decorated with boulders or shrubs, also pleases the eye of the bench, harmoniously merging in flower beds.

Preliminary steps

After the place is defined for the location of the bench, you need to plan a future product planning. It is worth considering a few points:

1. The size. In the event that the bench is typical of the size of the Internet desire to design an individual model, then you can use the data from the table.
2. The method of fastening the backrest.
3. Planning legs. It is possible to identify such a criterion on the basis of the mobility of the product. If the bench involves a stationary design, it should be strengthened in the ground using cement, leaving the pre-deepening in the soil the necessary value.

Table of standard size of the bench.

Height seat, m	Width seat, m	Back height, m
0,4-0,5	0,5-0,55	0,35-0,5

When a drawing plan is drawn up, then it is possible to easily determine the size of every detail of the bench, then proceed to its manufacture.

It is also worth lending to the question of the material from which the garden bench will be made with their own hands. Each material has its own special nuances that can be used as advantages to achieve the desired result.

Requirements for bench

In addition to the previous nuances in the process of designing the product, it is worth considering a certain list of requirements that it must match. Be sure to be taken into account:

1. Safety. It is impossible to allow an unreliable design of the product, because it can bring a lot of trouble at the moment of use. It is worth ensuring safe application to choose only high-quality material, as well as fasteners and any fittings.
2. Convenience. Undoubtedly, such an object in the garden as a garden bench must be convenient that the recreation process prevented anything. To do this, we need to be very competent and carefully approach the project to create a project and think over all the details in advance.
3. Infertility to the influence of external conditions. To ensure a long-term preservation of the appearance and service life, it is necessary to choose only solid material on the assembly stage. Additionally, it is necessary to process it (in the case of the manufacture of wood material) with special means that are able to provide a product of protection.

Design options

Variations on which a garden bench can be made with their own hands quite a lot. If we are talking about works from a wooden material, then for this you will need the following list of tools and material.

Any cottage bench has, in fact, the same assembly process. To more accurately understand this process, it can be considered on a specific example, based on the material listed above.

Help: A similar principle is used when self-creating a tree bench in any embodiment.

Simple bench

In order for no problems in the process of drawing up the drawing, it is possible to use it ready. Such a bench is very easy to manufacture. It is only necessary to drive additional supporting bars for three more and smaller sizes. The assembly occurs on the specified principle.

Help: Diversify such a product, you can simply change the color decision, as well as drawing various kinds of patterns. But at the same time, it is necessary to carry out the processing of wood material.

Classical

It is also quite easy to design, plus it is possible to vary with the back, replacing the location of the planks, for example, to make them cruciform. If you approach the process of creating such a shop with the execution of all these nuances, it will be used not enough for a long time. For the drawing, you can use already available, and the dimensions take the standard sample.

Foldable bench for cottage

Metal bench.

Garden bench can be done not only from wooden material. You can use a metal frame, to do which will not be difficult to everyone, even if there is no way in the forging of the metal.

To design a frame for a bench, a cold forging can be applied, namely, combine the metal frame part of the metal frame. At the same time, you can complement the product, decorating it.

The table indicates the principle for which the garden bench is done with their own hands.

Process	Description
Size definition	If there is no project of the bench, in which all sizes will be competent, then the dimension of the standard sample can be used. It can be in the length of the seat of 1500 mm, a width of 500 mm, and the back of such values \u200b\u200bwill be 900 mm. If the occupation for creating a bench for a garden is new, then it is better to use a variety of products one of the simplest according to the design and sizes.
Designing framework	The first is made the seat. To do this, you need several segments of pipes, 1500 mm long and 400 mm, each two pieces. If there are no such segments in the finished form, they need to be made independently. To achieve a more reliable structure, it is possible to supplement the structural structures to the frame ribs.
Designing legs	The length of the legs should be 460 mm, it is precisely this size that needs to be done for this pipe. Also, in addition, it is necessary to take care that the front and rear legs are connected to each other. This will provide the best degree of sustainability.
Making back	The back is made in such a way that parts of the pipes, the size of 1.5 m and 44 cm were welded with each other. After this process is completed, you can welcome it to the already manufactured part of the structure. The back is best spaced at an angle of up to 20 degrees, it will provide the optimal level of comfort when seat on the bench. Regarding the reliability of the back - the ribs of the hardness of the longitudinal and transverse direction will help.
Polishing	At the end of the design of the frame of metal, it should be cleaned with existing docks, as well as polish the metal product and coat using soil.
Manufacturing wooden elements	In order for it to acquire a complete view, you need to make wooden parts that will be attached on top of the frame. Such elements can be easily accomplished using a timber or board. Depending on the size of the framework, it is necessary to determine the size of the wooden elements, as well as the direction of their attachment. You also need to keep in mind that all parts must be smooth, without any kind of damage.
Connect all elements	To connect all manufactured items, you can use the electric jigsaw and make the required number of holes in the frame and wooden parts for their attachment to each other. As fasteners, it is best to use bolts that have a rounded type hats, as well as nuts.
Completion of work	And the rest of the latter, before the garden bench will be made on their own and is ready for use, it is necessary to process wood sections with the help of a veil. You can use and lacquer for such purposes. Such a procedure will protect material from many unwanted factors.

A positive point in such a design is that due to the material that is included in the design, it is quite easy to transport or rearrange it to be transported if desired. Also important is that the product is stable to the temperature of the temperature regime, which will be the opportunity to use it not one year in a row.

Helpful information

In the process of manufacturing a garden bench, it is better to keep in mind the following rules that will largely simplify work and help to avoid difficulties:

1. By purchasing material for the design, it is worth considering the percentage of losses when cutting the required parts. It is about 10%.
2. So that there is no material overpowering, and it is possible to achieve its savings, it is best to start the manufacture and cutting of elements and those boards that are the longest.
3. If there is a desire to make a larger width seat than is specified in standard sizes, then it is necessary to remember that it is possible to brass the wood material, in the absence of a supporting frame structure.
4. In order not to be injured, it is better to initially take care of the elimination of all angular and pointed sites.
5. It is also worth remembering that the wood material is inclined to dryness, which should be considered when drawing up the drawing and leaving places for the clearances.

Video - Interesting ideas for making a garden bench on their own

Benches and shops in the country and in the garden are primarily a resting place. But just put a bench - not interesting. After all, you can create a beautiful corner. In order not to relax, but enjoy the nature and fruits of your work. There are many interesting ideas. Moreover, often the most simple designs such that, with their own hands can make anyone who has their hands from the shoulders.

Stock Foto Original benches (ideas for summer cottages and garden)

What ordinary benches, benches know everything they look like - saw, and more than once. But the usual is the simplest - something I do not want. Especially if there are already the process of decorating the site or so far only planning. Why not start with benches? And there and other decorations will catch up. It is worth just start.

In the garden or near the house you want to have more than greenery: the colors of beautiful and different. - It's good, but why not combine them with a bench.

What could be easier? Two wooden boxes in which flowers are planted and between them a pair of sharply and polished boards. You can put this bench near the wall, and to fill a couple of long boards on the wall - there will be a back.

Not everyone likes the flower beds from a tree: wood requires care, and without it quickly loses appearance. It is especially difficult to care for a tree that comes into contact with the soil. Instead of wooden boxes, such as stone or concrete courses can be.

This bench at the dacha do with your own hands is completely simple. You can find ready-made concrete flower beds or make something similar. Board can be purchased processed, but you can do it yourself. Instead of the board, there may be half a log - depending on what style the site is drawn up. Fasten the seat is easier using a metal corner. It is attached to concrete with the help of a dowel, to the tree - with self-drawing from below or bolts through.

If someone has large plants in solid vases, you can implement the following idea. In this embodiment, the bench covers plants. So that there are no surprises, the vases should be very durable ....

There is a similar option to shop from boards and without plants: maybe you need to put on or to put. Supports fold from the boards of the same size, and the seat is from the bar.

Bench bench - non-standard option

And also variations on the same topic: hollow building blocks are used as support. Inserted bars are inserted into the holes. This is the seat benches. Only the faces of the bar sharp, or it will be uncomfortable.

For this garden bench, it is advisable to find large-size blocks, with thick walls. If not - you need to securely secure the blocks one with another. The whole task is to secure first blocks (for example with studs), and then to them - bars (bolts or brazers).

Benches made of logs

If your site is drawn up in the style of Rustic or ethno, the standard approach will not suit you. It is best to use log in this case - with or without bark - this is your choice.

The seat bench seat is painted along a large or medium diameter barrel. Back - or smaller on the diameter of the barrel, or just cut closer to the edge. The legs can also be made of slices of slices of logs (see the photo below).

Bench from the log - quickly and just

The legs and seats are connected together with metal pins: a hole of slightly smaller diameter is drilled under the pin in both parts. The pin is clogged into one of them, the second part is satisfied and also clogs, but they are not hitting the pin, but on wood. In order not to follow the traces, they laid a piece of an unnecessary board and on it are knocking the hammer (or sledgehammer). Such compounds should be quite reliable, but for confidence you can install two or three pins, and you can make a slight log, making a flat area on the same size on both parts connected. By zooming the area of \u200b\u200bthe support, increase the fittings of the seat mounting: all the same, there is a lot of logs.

Option bench without back

Another interesting option in the style of "Ethno" is presented in the photo above. It is implemented in stone, but it is possible to make this bench from the log. The seat is a very thick board, the legs are most of the deck of large diameter. In the deck will be cut down the groove under the seat laying. If there is a tool (an ax, a grinder or chainsaw, you can make a cutout) to do simply.

Often the desktop is needed in the country. From the log you can not only make a bench, but also the table. A variant of such an ensemble - in the photo. Only the tabletop is made of boards, all other parts are logs of different diameters or from halves.

The big degree of processing is inherent in the following bench in the same style. The back, legs, armrests are made of thick and not very branches, the seat is made of sterling and treated (purified from the crust and ground) unedged board.

Almost also made another bench. Only boards and branches are located in another direction and the other appearance is obtained. Bench with your own hands of this type does not require great mastery. In this case, the more careful work is, the more decorative the result.

Wicker back - meet infrequent

Around the tree you can make a platform for recreation and bench. Designs are simple, make flooring so altogether simply.

You can add a recreation group. And above the bench can be put - this is the "progenitor" of the ordinary arch - one of the types of light gazebo. And to relaxation to be completely complete, you can do, or.

From metal and wood

Few people will put fully metal benches at home. Of course, they can be very beautiful, but in summer heated to incredible temperatures, and slightly cool down - they do not sit on them, since too cold. These shortcomings are devoid of metal and wood benches. The legs and carrier design are made of metal, and the seat and the back (if any) is made of wood. And also there are interesting shops in modern design.

Rectangles are welded from the profile, jumpers are welded to the side walls, for which the seatboards are based on. Simple, stylish, reliably, functionally.

In a more advanced form - with armrests, back, soft pillows on the seat, such a design may look like in the photo. A wide seat turns a bench into the sofa, and the comforts add pillows - covered with a cloth furnace foam. In the same style, the tables are made of proftrubes and a tabletop from the boards.

One important point: if you make a seat or a worktop from several adjacent elements, they do not need to be allowed to be allowed. There should be a gap of 3-4 mm between adjacent boards / bars. Wood that swells, then dries. In order for these processes the surface remains relatively smooth, the gap is needed.

If more smooth lines are needed - for families with children - you can bend pipes and make garden benches and a table with rounded faces. This garden furniture is completely safe. The usual round or professional curb is bend, leaving on the sides in the form of the letter "P" with a wide back. The length of this back is the length of the shop. For the table, dimensions make a little more: the legs and the back is longer.

Make two identical blanks on the table and bench. Next cuts the boards the same length. For a seat of about 40 cm, for table tops at least 55 cm. Must attach to tubes with furniture bolts with a flat hat. So that the caps are not sticking out, the hole slightly larger diameter.

Benches from the board

The most numerous group shops and benches from the boards. There are structures, more reminiscent sofas, especially if they lay soft pillows on them - and you can lie down.

Garden furniture in the modern style is easy to collect: rectangles with partitions from thinner boards interconnected.

Even the ordinary design of the country shop can become an exclusive, if you approach it with a fantasy: Wooden wheels are used instead of legs and armrests. It turned out the designer thing.

Shop from boards with back and wheels instead of the sideways - it looks interesting

And the simplest possible is the board on the legs in the form of the letter "X". Such shops built a century ago, you can see them today.

From the boards you can make a bench in a modern style: in the form of the letter "P". With this design, the main task is to ensure rigid fixation of the legs and the seats: the driving forces are not compensated by anything. In this case, it is important to take a thick board or a bar so that it does not begged. You can put the board "on the edge": so the rigidity will be greater. To enhance reliability, you can set the corner from below.

In the photo option with a stammer under 45 °. Having a stubble or circular saw of an accurate cut is easy to achieve. Precisely docked the workpiece and scrapering them we get an angle of 90 °. If the seat is not to fake, it will serve for a long time ...

An interesting and reliable option bench is presented in the photo below. The legs are collected from the boards of different lengths: each second shorter on the width of the seat board. Interesting idea. Make such a bench easily: it is important to withstand the dimensions, but everything is connected very simple: nails in the seats rae.

Original benches

Here, it seems that you can still come up with .. and it turns out, much. For example, attach the seat to the large stone.

Make a design of bamboo stems.

Or stone.

Sitting winter will be unpleasant, but beautiful ...

How to make a bench: photo reports

From the stone, we will not make shops - there are not everyone, but from different woods - we can. Tell about the manufacture of simple, but unusual designs. To make your own hand, the bench was the subject of pride.

Shop without back

The design is simple, but it looks interesting at the expense of a specific material. For the legs used a ram with rounded edges. If you have a log log, you can hang them on the sides. It turns out almost the same effect. Such a material is not so rare, the legs are unusually collected: the bars are laid one on another plastics. It gives the highlight and adds attractiveness.

This bench without a back has a length - about 120 cm, the width is about 45 cm, the height is 38 cm. Rounder the faces of the bar can be possible with a cutter, and you can find a similar profiled. It is more expensive, but it will be easier to work with it: it is already well processed and is simply connected.

Depending on the found cross section of the bar, you will calculate the length that you need. Determine how many bars will have to fold one on the other so that it turns out the height. In this case, 5 bars took one leg. Total 45 cm * 5 pcs - 2.25 m. Two legs needed 4.5 m timber. On the seat used the board 40 mm thick and 90 mm width. For seats need 5 1.5 meters long boards. It turned out 1.2 m * 5 pieces \u003d 6 m.

First cut and process the boards for the seat. Their face must be rounded. If there is no grinding machine or a milling machine, you will have to work emery paper, and you can find such a board or agree on the sawmill so that it is treated with it, and have gripped it: much less work will be. So, cut the same board length, grind and cover with varnish (with toning or without your choice).

Brokes for the legs fold one near one, aligning their edges. With the help of the kitchen and pencil, apply the lines where fasteners will be located. Distance between lines - 7-10 cm.

The pins can be taken metal, and you can make brazen - carved out of wood. The holes are drilled slightly less than a diameter, the depth of the hole is half the pins length. Then they are clogged into one item, on top of the same hole the second item is satisfied. The connection is reliable, but for confidence you can add glue, although then the design will be understood.

With pin connection, the main task make holes strictly one above the other so that the parts planned on the pin give a smooth edge. Part of the work was made - they ran the lines where we will drill, now you need to measure the same distance from the edge. To do this, make a template. We take a segment of a strip of a width of about 1.5 cm. At such a distance from the edge of the bars we will drill holes. By applying it exactly along the edge, we note the intersection of the intersection with the perpendicular lines deposited.

Pins will be installed in a checker order, because we will drill holes through one intersection. Also, the holes on one bar from different sides are made in a checker order. Similarly, on the pins - the disconnection of the legs with the seat is made: two pins for each bar.

Technologically, this type of connection is correct, but it is complex and requires a certain skill. You can do it easier. Fold all the bars one on the other, fasten the clamps, drill through in two or three sets - in the center and along the edges, connect the long stud, with the plated under the hat and the nut with the washers. To the legs assembled in this way, the seat strip can be navigated from above or try to make a pin compound.

The bench is made with your own hands. Stroperation remained

If the nails seat nailed, take a few mastic for a suitable color tree, add some very small sawdust and stir. By this makeup, smear the locations of the connections. When dried, stripped with a skin. Collect all the details before the smooth condition and cover with varnish or paints on the tree for outdoor work (better not undermined, and which leave the visible wood texture).

How and what can you paint wood. It is talking about the lining, but painting techniques remain the same, and the compositions must be taken to outdoor use.

Bench with your hands from broken chairs

In any farming, you can find two old stools. Should they be the same and strong enough. We disassemble chairs, leaving a piece with the back and legs. We connect two backs with bars of a suitable cross section.

For greater stiffness at the bottom, at a distance of about 20 cm from the floor, where before the chairs were also jumpers, we make another frame with transverse crossbars. It can be used as a footrest or for storing any things.

After grinding, paints the resulting structure. This time, the paint should be ordinary: different breeds of wood can be painted only by observing colors. Apply a brush or from a canister.

It's small: Cut in size seats from thick plywood (thickness 8-10 mm) and cover it with foam rubber and cloth.

Chair / Pallet Garden Bench

Everything comes in the farm. Even from cargo pallets you can make garden furniture. And there is no need to disassemble them: one use for the seat, from the second we will make a back. You will need only well-processed planks for armrests and bars for legs.

In one of the pallets, we enhance the place of attachment, inserting pieces of bars. By inserting, from screwing with self-draws with one and on the other hand.

From a bar with a cross section of at least 100 * 100 mm we cut four identical segments of 80 cm long. Screw them in those places that have just enhanced. We leave 20-25 cm on the legs. Film four long self-ideas - 150 mm and not shorter.

It is important to observe verticality and leave the same feet. Then the seat will stand smoothly. If there are errors in height, you can try to cut down, but then you will have to saw from above - so that the armrests are smooth. So try to fasten exactly. With the deviations from the vertical, you can only fight the leg again.

To rear racks, the second pallet is dripped, and on the sides - a plank for armrests.

It remains to cut a piece from the furniture foam rubber and cover it with a cloth. You can make pillows and for the back. If you are not going to handle everything thoroughly, but to make the loft style chair, pass by sandpaper or grinding, finishing all the surfaces before smoothness. Cover can be painted, giving wood dark color.

Drawings of wood benches

Video lessons

Several videos about how to make benches with your own hands.

If you hit this page, then most likely, you have a need for buying or making a bench in the gazebo.

This article creates the most interesting options for benches and benches that can be equipped with your recreation area. We will also analyze the process of building a wooden bench on their own, as you can save money on this subject, and the result is even better to get the result.

Set of wooden benches and tables

More details about the furniture in the gazebo can be read in publication.

Many owners do not pay special attention to this furniture. They put that the first shoulder were caught, and forgotten. The table over time is dumping, chairs are deformed, the shop is stagged, and no action is accepted.

I would like to draw attention to the fact that the recreation area should be at least neat and comfortable. If at least one of these factors does not coincide with the real situation - it's time to think about its change.

The meaning of the wooden benches and shops about the same thing is to plant people on a flat surface to be comfortable and safe. Depending on your desire, you can add a back into the stake design, then the gatherings will be more convenient (although it is not always appropriate).

Massive trees

Below will be presented photos of options for arbor benches. Examples with backs and without, as well as from the combination of materials - wood and metal will be shown.

Shop without back

The easiest, cheap and reliable option is a shop. It fits perfectly into any interior, does not take extra space and allows you to put the maximum number of people at the table.

As in any seating furniture, one of the most important indicators is its stability.

You will be surprised when you begin to check the summer furniture of your friends or even your own, and you will not find almost a single item that would be perfect on the surface (if you did not take this issue).

The shop can be smooth, but there is no longer no floor. A number of questions occur immediately - to change the floor, sit on an unstable shop or modify it under the irregularities of the floor?

These are such problems face dackets when it comes to the organization of the recreation area. Therefore, the purchase or independent manufacture of a good shop may be harder than you were originally calculated.

Bench with back

An option with the back is more convenient and aesthetic. Its design is noticeably more complicated compared to the bench. For its installation, it may be stopped on the wall or "dead" mount to the floor.

Therefore, before watching anything, it is necessary to remove the size of the inner area of \u200b\u200bthe arbor, and ask yourself a question - what the optimal size of the bench should be and how to place it.

In terms of appearance and quality, they can be absolutely different.

It may be a thick array of oak, which will have another 50 years, and there may be a design from the boards that will reform, deform and demand additional care.

There are many ideas (I saw more than 30) how to make a bench from old furniture - chairs, beds, chest and the like. If you approach this issue creatively, the result will not be so "collective farm", as it seems at first glance. A couple of examples are below.

From old chairs

From the old bed

From wood and metal

Such couples and benches you could see on urban streets, parks and squares. Most often it is a metal base and a wooden countertop (if we are talking about the table) or a wooden seat and back (if we are talking about a bench). This design allows to reduce the dimensions of the furniture, which is extremely important in the limited space of the arbor.

Folding

Convenient option for giving is a foldable bench. Thanks to its design, it is very easy to transfer it from place to place - it is especially true for those who will constantly wear this shop from home in a gazebo and vice versa.

If such an option decides your problems of this plan, then for 1850 rubles you can buy it in the store " Wooden-World.».

Set table, benches and chairs

Online stores rarely offer to buy a separate item. Most often sets of different formats, the basis of which is the table, and in addition to the chairs and / or benches. By the way, in addition to the bench, - we were told about this in detail in another publication.

I would like to know you with them, it is quite likely to some of the examples of you hooked and in the future will decorate the interior of your arbor.

Table set, larch shops and chairs

Instructions for independent production

It seems such an elementary thing - bench. I sat down, leaned on the back, pulled my feet, rested. But if you think about it with the design, it will be quite a logical question: "How to do so that it does not overturn back?".

In order to answer it correctly, it is necessary to explore the experience of professionals and lovers who have already studied the moment. Below we consider an example of building a wooden bench for a gazebo.

Building material and tools

For the manufacture of the bench we will need:

Sergey Kudvets with a board

• Boards (can be used);
• A circular saw;
• Milling cutter;
• Bulgarian with grinding circle;
• Screwdriver;
• Saws.

What parts is the bench

All work is to make four parts benches from the board, after which they are all connected. To create a shop you will need to cut out:

• Countertop (seat);
• Jumper (dressing);
• Two legs.

All parts are presented in the photo below. Before starting working with a tree, you need to create a drawing of the shop that you need. "ABE What" size will not suit, it is necessary to remove the size from the gazebo, and then design our product.

Composite parts of the shop

Video

Below will be two approaches to the manufacture of shop (amateur) and benches (professional). Both items are made on their own from the classic building material - wood, but the approaches are completely different, as the end result itself.

In the first video, the shop will be shown, which is described above. This video will teach you to do it with your own hands. The second is greater for self-development, for not everyone has such a workshop at hand, in which you can create (in the good sense of the word) such things.

Amateur approach

The video is represented by the channel " Workshop Sergey Kudraven" In Him, Sergey tells in detail about how from the unedged pine board make a reliable and simple shop. The above-described list of building material and tools is made on this video.

Professional approach

Stunning video instruction in which the author shows the entire process of making a wooden bench. Channel is called " Adventures of wood"The author is very pleasant sharing information with the audience, and the work process itself simply fascinates. I personally looked just for sake of self-development. Very impressed with how aesthetically cuts everything, it consists and attached.

And the point is not even that it is very convenient and functionally, but in the fact that the garden bench has always been almost the main element of the decoration of the household site. In order for the bench perfectly into the overall appearance of the garden, and at the same time kept its functional affiliation, it will not be too much more detailed to consider this item "Garden Interior".

Materials of garden beam

Modern benches are made of both classic materials - wood, stone, wrought iron, marble, and from more modern plastic, synthetic fiber. Often benches can be made simultaneously from two or more materials - stone and iron, wood and glass, wrought steel and wood. From this depends on the style in which this subject is made. This means that it is necessary to select a bench for the garden, taking into account its stylistic features. For example, a bench from stone or wrought iron and wood will perfectly fit into the garden, made in a classic style, and the plastic bench will look great on the lawn in front of the cottage in a modern style.

But still, the most popular material used for the manufacture of a garden bench is a tree. In particular, Tick is most often used. Ticky tree has always been used in shipbuilding, as it is very moisture resistant. In the fresh air, a gray raid appears on the furniture from teak, which is easily removed with a soft brush. In addition, tick furniture must be treated with teak oil, which comes complete with furniture - so furniture will serve for many years.

Manufacturers of garden furniture are often not limited to production only benches, but make whole ensembles of furniture for the garden. In addition to the benches, it includes a table, chairs, swing, pillow storage chests - and all this, performed in one style, will become amazing decoration of any garden.

Where to put a garden bench

If only single benches are planned to put in the garden, then it is necessary to put one bench at the porch - it will be a wonderful sign of hospitality, and if you put another bench somewhere in the garden depth, under an empty tree, then this place will be an excellent corner for privacy and rest in silence.

Of course, the bench, first of all, plays a functional role. Therefore, it is worth a particular attention to its dimensions. For example, if the bench is installed in the part of the garden, where family gatherings for barbecue are held, then the bench should be long there, or several small benches, so that all family members and guests can comfortably accommodate. But if you remove the true functional purpose of the bench, then you should pay attention to the psychological aspects of its use.

According to psychologists, the joint seat on the bench can pick up the collapsing spouses, tie a friendship with a pleasant interlocutor. And the secret of this is that when people are sitting on a bench, their look covers one landscape, they breathe in one air, their thoughts and feelings are gradually starting to flow in one direction.

Garden benches - Photo

But as for the shape of the bench, now there are many of them and choose anything to be taste. Suppose the garden grows a huge spreader tree with a wide trunk. Around it can be installed a round bench so that the sitting were back to the tree trunk. But if you build a beautiful round flowerbed or a small fountain, then the round bench will fit perfectly in the same way, only sitting will already be face to the center of the composition. Round benches are very convenient to accommodate a lot of people, while not taking a lot of space.

Everyone who installed a bench in its garden, or even a few, with confidence it can say that he received another peculiar room, a cozy corner of his house, in which it is always nice to relax and spend time with loved ones. The only difference is that this corner is open-air.

Bench around the tree do it yourself

The bench with several seats can be a logical conclusion of flower beds or surround a tree in the garden. A couple of days of work - and a new place of rest is ready!

It will be necessary to work with decorative details, you can use our option or independently develop a form. The presented bench is suitable for trees with a barrel with a thickness of up to 45-50 cm!

The template for decorative slats is based on a grid of 5 x 5 cm. Intellite the cells on the tree, and then transfer the smooth line.

1. The shortest seat board is performed with a special notch so that the inclined backs are precisely adjacent to it. To do this, to the details, which from both ends is already spilling with a 17 °, attach two rails as a reference point for marking. The slave imposed on top should be the size of the back, the second rack serves only as a support.
2. Starting from the rear angle, note the thickness of the back (3.5 cm).
3. Since the angle of inclination of the back is 100 °, it is necessary to verify the recess with the angle of inclination of the part.
4. Using a joinery of a carbon, mark the angle of 100 °, as shown in the photo. Then hesitate cut the complex "wedge".
5. A blackboard with two slats will serve as a template for mounting seats.
6. So that all six seats were the same, check with the template.
7. For decorative slats, you will need a grid pattern, with which you can handle all six boards.
8. Holes Perform the forstner drill.
9. Round the edges of the top mill.
10. Mount the back.
11. Cover the details of the protective primer for wood and paint their enamel.

Bench for Garden - Photo Ideas