Liquid nails: characteristics and choice. Moment Liquid nails: Purpose, Application and proper use of liquid nails Features

Under the brand "Moment installation" in the building materials market, a plurality of adhesive compositions are presented, among which there is a means for any occasion. Such a variety is confused by an inexperienced builder. How to choose the game "Moment Installation" glue?

Each type of adhesive mixtures "moment installation" has its own technical qualities and is provided for fastening a certain type of materials under the necessary conditions. The wrong choice will lead to poor-quality clutch or damage to the material. Information on the types and combination of materials is contained in the instructions.

What is the mounting glue

The glue is able to interact with the material of the working surfaces, so it can easily damage it. This property depends on the type of solvent, which is part of the mixture. The mounted glue "moment" is divided into two types:

Based on synthetic resins. Such liquid nails contain organic solvents, which gives them with a caustic smell. They react with plastic, and therefore, for gluing parts from foam or PVC does not apply. On the package there is always the designation "MR". The compounds obtained using these adhesives are characterized by high strength and increased resistance to moisture. This type of liquid nails is easily flammable.
Based on polyacrylate water dispersion. These liquid nails on the package contain the MV mark. Their composition is neutral in chemical ratio, so they are used for the interior decoration of the premises. They are usually fixed by plinth, baguettes or PVC tiles.

Tip! If the technical description says that the glue includes polyvinyl acetate or polyacrylate water dispersion, then it is suitable for PVC processing.

Selection of mounting glue for each material

To facilitate life to the consumer and to simplify the selection of suitable liquid nails, the manufacturer divided its products into categories, indicating the appearance and characteristics of the materials to which it is applicable:

To install metal elements and ceramics, all MP compositions are used: "for panels", "universal" (400 g), "instant grip", "especially". An acrylic composition of Express MB-50 is used to perform indoor finishes.
To secure the mirror structures, a special mounting glue MR-50, not containing substances damaging amalgam, are used. This mirror glue is installed on any base (metal, concrete, paint, wood, etc.) in the frozen form, the plasticity and elasticity remains, preventing the movement of the mirror vertically under its severity.
For repairs in rooms with high humidity (in the bathroom, bathroom or pool), a special mb-40 mounting glue is sustained. Also used "Moment Mounting MF-80", which was created on the basis of polyurethane prepolymers, does not have in the composition of cyanides, has the qualities of sealant.
In case of finishing works inside the premises for fastening the plinth, ceiling elements, styling panels, PVC tiles should be selected glue MB-45 "Express Decor". White color composition allows organically to enter a decorative element in a constructive. The gluing is characterized by imperceptible seams, since when drying shrinkage glue is minimal.
For the installation of bulk sweaturated panels and large structures, formulations with increased primary clutch parameters are used. This is an acrylic glue "Superxile Suite", in which the power of the initial clutch is 100 kg per square meter. There is also on the basis of rubber liquid nails: MP-35 "For panels" and MR-55 "Especially".

Acrylic liquid nails

Such mixtures for installation are created on a water base, so do not represent environmental hazards for humans.

Important! This glue is toxic and dangerous for fish. In this regard, the remaining unused acrylic (non-political) adhesive composition is not subject to sewage disposal.

All brands of glue "moment Liquid nails" on a water-dispersive basis have general properties:

there is no strong smell;
increased adhesive qualities;
suitable not only for gluing parts, but also for filling the slit gaps, leveling surfaces;
apply both for internal and external work, since resistant to water and humid environment;
it is possible to dye drying glue by dispersion paint;
fast primary setting, the power parameter is specified in the name number;
allows you to adjust the placement of parts for 15 minutes from the moment of applying the adhesive mixture;
freezing without a hardened mixture is not allowed;
permissible temperature for adhesive work - from +5 to +35 degrees;
the mixture is packed in a tube designed to work with a plunger pistol;
the glue does not lose its qualities for 1.5 years when stored in the factory hermetically closed bottle.

Acrylic mounted glue "Moments" is available in two versions: white and transparent. Colorless glue is marked with the capital letter "P", for example, MVP-70.

A wide range of materials enshrined with acrylic liquid nails, says that they are universal. Including, mixtures of this type are recommended to use for gluing PVC elements. There are no aggressive reagents in their composition, and the porous base absorbs part of the glue, increasing the strength of the connection.

When filling with glue emptiness with a width to 1.5 cm width, the shrinkage is invisible. If you need to fill out bulk recesses, it is recommended to use inserts from wood or gypsum.

Tip! Surpluging water-dispersion glue to polymerization is removed simply with a damp cloth.

Liquid nails on synthetic resins

This type of adhesive mixtures is provided for installation work. They contain evaporating substances harmful to health, so work is carried out in well-ventilated premises.

All rubber compositions are characteristic of the following:

the increased moisture resistance of the connection allows the adhesive in the places of constant contact with water;
more often apply as sealant;
fasten structural elements and materials to any base: brick, concrete, wooden, metal, glass, from PVC or chipboard;
perfectly gluits polished, non-porous surfaces;
the resulting compound is elastic, has a resistance to vibration;

Important! Separate types of liquid nails based on synthetic resins are applicable to gluing expanded polystyrene, but it is done in rare cases.

Technology of work is different from the use of acrylic glue. The surfaces treated with liquid nails are first connected, then immediately diluted so that the solvent evaporated, which helps to improve the primary bonding. After 7-10 minutes, the elements are again connected and tightly pressed. Surplus glue is not removed with water, you will have to use the solvent, in addition, the probability of spoiling the adjacent elements is high.

Basic principles of mounting plates with liquid nails

Before gluing on the fresh concrete base, it is necessary to wait a month to finally evaporated moisture, as well as other substances that are allocated during the frost.
The painted base is necessary to pre-operate, eliminate gloss. Then only perform the installation of PVC panels.
The mounting glue "Moments" should be applied by a constant press, a strip in the shape of a snake or straight lines around the perimeter of the stove with an indentation from the edge of approximately 2 cm.
Rubber glue is grabbed for a quarter of an hour. Therefore, when it is used, it is necessary to carry out the operation of rapid evaporation, then the tile is installed in place and tightly pressed mechanically (using a screed, brackets). A day later, the locks are permissible to remove.

Glue "Moment Liquid nails" is a simple and convenient replacement and addition of the traditional mechanical method of fastening products and parts during construction and finishing works in the room and on the street. Due to the absence of metal fasteners, the finished design looks neat and harmonious. Glue "Moment Installation" - one of the most popular and affordable of all such materials.

If you want to consolidate any detail of the interior and at the same time not to use screws, hammer and drill, then you can apply liquid nails "moment mounting". The remedy has a large number of advantages: excellent fixation, which provides high-quality combination of the composition with the surface, versatility, resistance to moisture, so it will act perfectly even in the bathroom. In addition, glue is elastic and can fasten most building materials.

"Moment installation" can be used for internal and external work, as they have resistance to atmospheric influences. In addition, it can be used in a wide temperature range from -40 to + 80 degrees. The substance does not smell, although it may have a different shade depending on the species.

Liquid nails "Moments Mounting Supersensive" has higher quality. The only difference from the other types of funds is a beige shade. It is possible to apply it to glue the decorative elements on any surface inside the house and from the outside. And the substance is able to firmly fix in the opening, window sills, plinth, platbands, ceramic plates, wood and other materials. Elements can have large dimensions.

Liquid nails "Moment installation" are very easy to use. However, there are several nuances that useful to know the user. First of all, a special gun should be applied to the surface to be applied to the surface, without which no one turns out to squeeze the glue from the tube. The cost of the mechanism is low, especially since you can buy it in any construction store. Install the balloon in such a gun is very simple.

Liquid nails "Moment Installation" easily open. To do this, cut off the plastic sealing on the lid and unscrew it. If you have acquired a means in a metal canister, the protection will have to additionally pierce the nail. Apply the substance is needed on a clean and dry surface. In order for the element well adhesive, the base of the primer should be processed. After complete drying of the surfaces, the glue should be applied to one of them. If the product is small, then it is better to squeeze a solid line on it. Otherwise, you can apply the point of application.

After the glue "liquid nails, the installation" is already on the product, it should be tightly lean to the base base and hold for about 5 minutes. In this case, the element can be easily tired with a fist. So you will provide a more durable mount.

If the remedy fell on or the glued product itself, then it should not be removed until it dries, since otherwise you will simply smear the composition on the surface and make it dirty. The dried substance should be very gentle and accurately cut off with a sharp knife moistened in water or blade. That's all the features of the presented liquid nails. Good luck!

Liquid nails are such a special glue used in construction, and its production requires the use of a special composition based on liquid rubber and various additives in the form of special clay polymers or chalk. Its use is quite wide and not only for construction.

Liquid nails Mounting are manufactured by two groups:

Based on synthetic resins. This composition contains organic solvents, which can be easily determined by a characteristic sharp odor. This glue has its own list of materials with which it reacts, since organic substances when interacting with plastic dissolve the latter. This glue is indicated by MR and it is not used for work with foam, PVC, as well as during the work of fire safety. The main plus of this glue is excellent moisture resistance and strength. Used mainly for external work.
Based on water acrylate. This is a neutral composition of chemical composition, is used to work with PVC panels, for stickers of foam plinths. Can be used for internal works.

The first time this substance was tested as glue in 1968 when gluing two partitions from a tree. The test passed successfully, and the composition was launched into production. Since then, work on improvement has not stopped and so far, because the best is the enemy of good. This composition, called glue moment Installation Liquid nails, are now used to connect with such materials, wooden structures, glass, plastic, plexiglass, aluminum and alloys, as well as drywall and plug. Liquid nails are used for repair, for sealing seams. Also, when it is helped, you can stick heavy wallpapers, such as bamboo.

Selection of glue by category

Sometimes you can observe such a picture, for example, in Ob to the shelves with glue, there is a person and helplessly looks at the entire range of adhesives, not deciding to choose from, and there is no consultant, or it is busy.

A variety of adhesives moment Installation

To understand this diversity, you need to know which brand and for what works is suitable.

Liquid nails Mounting Supersensile

It is used for external and internal works, if you need to fix heavy structures, without using additional mounts.

Liquid nails Mounting Supersensile

They not only can be glued, but also fill the gaps and seams. It grabs very quickly, but there are a few minutes to fill the item. The glue is quite durable and withstands the temperature differences, as well as the effects of UV rays. It can be applied to a wet surface that not all adhesives can. You can apply both a smooth surface and on the surface with the pores, that is, on a brick, ceramics, fiberboard, plasterboard, pyana, glass, mirror, metal, various plastics. It is not recommended to use for non-ferrous metals, for acrylic glass, polyethylene, polypropylene, PCV, and similar materials. After drying, the seam can be painted.

When working with polystyrene foaming, it is necessary to cover the surfaces glued with diluted joinery glue, and after drying, we can apply liquid nails.

Available in packs of 400 grams, and it looks like a white toothpaste. What to buy this glue liquid nails moment installation, you need to pay 200 rubles.

Liquid nails moment Installation Express

This composition, like glue, work to glue parts both indoors and external work. It is moisture-resistant, but for rapid grapplation it is necessary that one or both bonded materials absorbed moisture. Withstand negative temperatures, does not have solvents.

Liquid nails moment Installation Express

Glue Express Moment Installation Liquid nails are used to glue such materials such as chipboard, MDF, cork, metal, wood, plaster parts, polystyrene, foam, and when installing wall panels from the materials described above. When it is assisted, the windowsills and door frames are installed, as well as the plinth, that is, parts should not have a greater weight. Produced in such a package: 125 grams, 250 grams, 400 grams. The price of liquid nails Glue Express moment Installation on the most common packaging of 250 grams in Moscow 106 rubles, 400 grams - 200 rubles.

Liquid nails moment Installation instant grip

This material grabs glued parts with an instant grip, like a bull terrier, and the force of grapping over time of the same force as from the first seconds.

This is a feature of this glue.

Liquid nails moment Installation instant grip

The features of the adhesive also include what glues the surfaces that do not absorb water. It also does not lose its properties under the influence of moisture and negative temperatures. You can use both for both indoors and repair and construction work in the air.

You can use for the same materials as the adhesive express moment Installation of liquid nails. It does not glue products from high and low pressure polyethylene, polypropylene and teflon.

When gluing surfaces, it is recommended to use a method that is called toothpick on the Internet. Available in two packs, 125 grams and 375 grams. What to buy this glue liquid nails Mounting, you need to give 300 rubles.

Liquid nails Mounting Universal

This glue has multidirectional use, and this is high quality glue. It contains rubber synthetic, as well as various resins. The additive in the form of the resin is added to increase the stickiness.

Liquid nails Mounting Universal

With glue, it is convenient to work, extranye impressions can be washed with water, while it does not lose its properties when exposed to moisture and frost, and also has good strength.

It is used to connect such materials such as wood, fiberboard, brick and concrete, as well as to glue the masonry from stone and marble, as well as for fiberglass, glass, polystyrene, for example in the bathroom. Just like previous brands, it does not glue parts with the use of polyethylene, polypropylene, teflon. Produced in a pack of 400 grams. On all products, Henkel gives a guarantee of 18 months. Price for glue moment Installation Liquid nails 200 rubles.

In addition to these brands, the moment of installation "one for the total" is produced on the basis of polymer, the moment is installation Express decor MV-45 for wall-based wall panels, the moment Installation Express decor MV-45 Glue top quality, the moment of installation is a high-term MP-55 which consists of a synthetic resin and solvents as the bases, use for heavy structures, the moment FIX wagon, a very interesting composition based on acrylic, which is offered to apply for gluing various types of finishes, sockets, tiles for the ceiling and plinths, the moment FIX expert, without organic Solvents are interesting because the details can be shifted within 15 minutes.

As you can make sure, Henkel's company is constantly working on new types of glue.

Basic rules when using adhesives

If the glue is made on the basis of synthetic resins, as for example, the specifically, it has a phenol. When it is used, it is necessary to remember that the adhesive pairs are very dangerous to health and, moreover, they are fuel. Therefore, it is used only for external work for connecting any materials, except for polystyolster. It is necessary to work with the respirator and protect your eyes and the skin from the hit of glue.

Of course, the company develops new and new glue brands, especially since they have demand. Liquid nails are available, having the basis of silane polymers that have excellent adhesion and do not have in the composition of toxic components.

If the glue has a water base, it is not desirable to use when working with the metal, and also when exposed to negative temperatures it is destroyed.

Apartment repair with your own hands: Tips of the best specialists Tools Today, such a thing as liquid nails have become very common and now face it much more often than just a few years ago. Some people, of course, may not even know for what and where they find their use.

Apartment repair do-it-yourself: Tips of the best specialists Tools

Liquid nails Mounting: Instructions for use

Today, such a thing as liquid nails has become very common and now face it much more often than just a few years ago. Some people, of course, may not even know for what and where they find their use. In turn, others are daily used in their lives, both at home and at work.

Liquid nails are nothing more than a special construction mounted glue, but with a slightly different composition than the usual glue, which is used by professionals. The composition of liquid nails is a certain amount of fine fillers, which is often used to glue a variety of materials during construction and installation.

It should be noted that if the material is combined with liquid nails, it is quite capable of withstanding a large load. In order to slightly increase the level of plasticity of this glue, it adds a small amount of special white clay, which acts as a synthetic rubber.

Liquid nails, instructions for use and their technical characteristics began to study quite a long time. For the first time, such an expression began to apply in 1968 and used it one of the American companies directly for its type of glue for construction. The same company then became the first to use glue directly in cartridges. Clay, which is available as part of any liquid nails, is also mined in America. It also has the largest world companies that are engaged not only by production, but also active sales of special glue.

Scope of liquid nails "Moment Installation"

Mounting glue can be used in construction to work with various materials, and therefore it can be called universal. Most often it is used in order to glue the following materials:

plasterboard;
wood;
glass;
plastic materials;
aluminum;
ceramics and polymer tiles;
natural plugs and so on.

In some situations, this type of glue can be used even as a sealant. With it, you can completely spend high-quality sealing of windows, bathrooms, boxes for doors and some other elements that are widely known in construction. But the ideal option will be that you will use directly instructions for the use of liquid nails, which is attached to each packaging of such a substance.

The scope of the universal mounting glue can be very different from each other, but at the same time there are special rules and instructions that need to be performed at work while working with glue of this type. These include the following:

before applying glue, first clean the surface, and then degreased it;
on the treated surface, dust, dirt or fat should not be present, it should be solid and dry;
liquid nails can be applied by applying a special pistol;
apply a glitter with stripes or in small dots, which are located separately one from the other;
after the glue is applied, the surface must be attached very hard to each other. If the surface has a large size, then in such a situation you can use the rubber or wooden in China.
Wait a few minutes until the glue flies the surface;
after the work is completed, it is necessary to remove the remnants of the adhesive. To do this, use acetone or solvent.

The main technical characteristics of liquid nails and instructions for use must be recognized in advance so that there are no problems during its use.

Advantage and disadvantages

Liquid nails, like many other materials of construction origin, have their advantages and cons that you need to know before you buy and start using glue. If we talk about the positive moments of this universal glue, then the following points can be noted:

the glue does not cause any harm to the working surface, does not allow forging further rust;
perfectly carry low temperatures and are among the environmental clean materials;
very rapid time of frozen of liquid nails, and there is no difference, what kind of environment surrounds them;
during the use of such adhesion, you should not use all sorts of percussion instruments;
the surfaces that were connected by these glue are very firmly held with each other;
liquid nails make it possible to glue a different kind of materials, regardless of which surface they have: smooth or rough.

It did not cost in this situation and without several drawbacks, which is very important to take into account while working with liquid nails. The main disadvantages include the following:

while working with universal glue, the moment of installation, it is advisable to use the respirator, because the material can have a very unpleasant smell for some time;
if you first use the material or experience with them insignificant, then it is quite difficult to use them.

Liquid nails on water based area and instructions for applying video

Most popular with water-based glue. It has several other disadvantages, except smell. Such nails are not recommended to be used to connect metal surfaces. Low temperature leads to the fact that the basis of water liquid nails begins to collapse. In order for the glue faster drying, you need to use a special heating.

Liquid nails: specifications

If you speak directly about the technical characteristics of the universal glue moment-installation, then they are simply excellent and this fact confirm many builders. The main important technical characteristics of experts include the following:

high level of strength;
excellent adhesion;
opposes corrosion;
there is no bad effect on the surface, which uses special glue for gluing;
very easy to use;
liquid nails resistant to high and low temperatures;
most of the glue has a completely normal neutral smell;
it has no components that could harm the human body, which works with them;
glue grips the surface to the maximum in a few minutes;
in order to attach the parts that have a weight of 50 kg, you need to use only one block of universal glue;
he is very economical.

First of all, it is necessary to clean the surface you are going to glue and degrease it. Then apply liquid nails on this surface. To do this, use a special pistol. You can apply glue by points, snake or in the form of a grid.

Very strongly press the two surfaces that need to be glued together. Give them the most correct location and keep so few minutes. It will be quite enough two or three minutes. Then wait somewhere 24 hours so that the glue is completely dry. At the end of this time, you can begin to carry out a mechanical effect on the surface.

How to remove liquid nails from the surface

In order to be able to remove the mounted moment-mounting glue from different surfaces, water, scraper, solvent and special cleaners for this situation are used. If you have applied relatively recently, and it has not yet managed to dry completely, it will be enough to remove water nails to remove water or a solvent that is based on the mineral. Until that time, while the sealant fails, it is completely successful and quickly removed by using fluid.

If they have already managed to dry, then for their removal, it is necessary to use special cleaners that can be found in every construction store. You can replace the cleaner with an ordinary scraper, but it must be used extremely gently, because there is a risk that the surface may be damaged.

It should be noted that liquid nails, the instructions for use can withstand different temperatures, but at the same time they do not tolerate direct solar rays. In order to be able to remove them with a scraper, leave the item that you glued with these glue for about a day under the sunny beams. Then you can thoroughly clean the surface.

If you are going to use substances based on minerals, then protect your hands with special gloves, because these solvents are among the aggressive. Thus, it is possible to remove glue from a variety of surfaces, starting with a tile or plastic and ending with wallpaper.

Liquid nails moment-installation have simply excellent technical characteristics and today they are indispensable during construction work. They help to get not only an excellent result in a short period of time, but also use them very simple. If you have not worked with them before, there will be several uses enough to acquire the necessary experience.

Liquid nails - Mounting glue, instructions for use and characteristics, video

If you decide to buy liquid nails, you should know that this is a type of glue with high strength characteristics, the application area of \u200b\u200bwhich is the connection of materials during construction and installation. Bled surfaces can even be heterogeneous. Thanks to the content of the fine filler filler, such mounting adhesive can also be connected and loose adjacent parts. How to glue with liquid nails and choose them, you will learn below.

What is liquid nails

The name itself happened from the American brand Liquid Nails company Macco. In the middle of the 20th century, it became the first to produce glue in cartridges. Liquid nails are very strong glue, the basis of which is acrylic and organic solvents. A clay with high plasticity is used as a fine-flow filler. The cost of liquid nails in Moscow and St. Petersburg varies within 100-500 rubles. This is not very expensive.

What can be glued with liquid nails

The main area of \u200b\u200buse is the construction and repair. Glue helps to connect a variety of materials. Even a droplet tools can withstand the weight almost 50 kg, and on the ceiling. In general, the strength of the glue ranges from 12 to 80 kg per square centimeter. For the connection, it will be suitable almost any surfaces - aluminum, stone, plasterboard, mirrors, wood, polymer tile. Plastic, glass and ceramics can also be glued with liquid nails.

How to work with liquid nails

The main thing in the instructions, how to use liquid nails, observe precautions. A respirator, gloves and safety glasses will be required to eliminate skin damage and respiratory tract. The drying time of liquid nails is 24 hours, although they are captured after 20-35 minutes. Before starting work, the glued surfaces need to be tiered from dirt. Clay can be cold or hot curing. It is applied with dots or stripes, the tube must be inserted into the gun. Then the details are tightly pressed to each other.

Types of liquid nails

Strength and adhesion determines the chemical composition of the adhesive. According to this criterion, organic-soluble and water-soluble types of liquid nails are allocated. They differ in many signs. The main characteristics of each type:

Organic, based on synthetic rubber, or neoprene nails. They are considered universal, apply in any climatic conditions and are suitable for all surfaces. They have a sharp smell that holds for several days.
Water soluble, or acrylic nails. They are more environmentally friendly, but cannot be used at minus temperature. Suitable for gluing porous materials and other lightweight designs. You can wash them with water and mineral solvent.

Liquid nails for plastic

In addition to the main classification in composition, there is a separation of the construction glue and the materials for which it is recommended. For example, liquid nails for plastic. On the package to them, it is written that the adhesive is suitable for PVC. It is better to take the compositions with the time of setting less than five minutes, otherwise it will be uncomfortable to press the materials to each other, especially the panels to the ceiling. As for manufacturers, the more famous are Pozitiv, Titan, Makrofix, Krass, Kraftool, Titebond and Quadro.

Clay mounting KRAFTOOL KN-915

tube 310 ml - 131 p.

Characteristics:

application temperature - 10-30 degrees;
color - beige;
time setting - 10 min.;
full drying - 72 hours;
heat-resistant;
water resistance - yes.

additionally contain an antiseptic;
you can use inside and outside the premises.

Krass glue, especially durable, white, 300 ml

140 p.

Characteristics:

storage temperature - 5-25 degrees;
time setting - 15 min;
full drying - 24-72 hours;
the base is water;
water resistance - yes.

not cracking;
does not give a shrinkage;
moisture-resistant;
does not smell;
thixotropic.

Liquid nails for mirrors

With the final decor of the premises, a frequent necessity is gluing a mirror, for example, in a hallway or bathroom. In this case, silicone glue will be required. Such liquid nails for mirrors are optimal. But there are several nuances of installation. Until the moment of complete setting, the mirror must be fixed with painting or construction scotch. The glue itself needs to be applied not clearly around the edges, otherwise the composition will flow beyond.

Tytan Professional for mirrors №930, beige, 380 g

125 p.

Characteristics:

shelf life - 12 months;
consumption - 200-400 g / m2;
full drying - 72 h.

possesses good adhesion;

Moment Installation for mirrors, 390 g

118 p.

Characteristics:

shelf life - 18 months;
consumption - 33-41 sq.m. mirrors;
time setting - 20 min;
full drying - 24 hours;
application temperature - from -17 to +40;
the base is synthetic resin.

does not damage the amalgam mirrors;
resistant to vertical shifts;
not peeling;
remains flexible;
moisture resistant.

it has the risk of explosive flammings of vapors near heat sources.

Liquid nails for foam

Applying such a construction glue when working with foam, it is important to pay attention to the composition of the selected means. It should not have substances that will react with insulation. The conditions for subsequent operation are important. Liquid nails for foam plastic are also applied point or thin strips throughout the perimeter of the glued surface.

Moment mounting supersensile, 250 g

165 p.

Characteristics:

shelf life - 18 months;
consumption - yield of roller with a diameter of 6 mm is 14 m;
time setting - 15 min;
full drying - 24 hours;
white color;
the base is synthetic resin.

without smell;
does not contain solvent;
has a superstal setting of 70 kg / m2 already at the time of gluing;
suitable for outdoor and internal works.

Glue mounting Stayer, moisture resistant, 280 ml

118 p.

Characteristics:

shelf life - 18 months;
consumption - 300-500 g / m2;
time setting - 10 min.;
full drying - 72 hours;
color - beige;
application temperature - from 10 to +30;
water resistance - yes.

suitable for internal and outdoor work;
strong weather conditions.

Liquid nails for wood

In the home repair, it is often featured and working with wood - glue platbands, decorative elements, plinth or arranged the doorway. Construction glue here is used with conventional nails. Liquid it is important to choose correctly, because the living material has the property to swell from moisture and dispel with its lack of. Because of this, it can weaken the fastening of parts. Liquid wood nails in addition to bonding elements perform the function of protecting real nails from rust. There are also special compositions that will cope with the connection of even wet wood.

MAKROFLEX MF910 for panels, 400 g

150 r.

Characteristics:

shelf life - 18 months;
consumption - 300-500 g / m2;
time setting - 5-10 min;
full drying - 72 hours;

waterproof;
vibration resistant;
suitable for works inside and outside;
elastic.

not suitable for Teflon, polypropylene, polyethylene.

Vermeister Quick Stop ADESIVO, 310 g

150 r.

Characteristics:

shelf life - 12 months;
color - transparent;
the base is water;
full drying - 24 hours;
application temperature - from -7 to +40.

ideal for fixing platbands, edging;
thixotropic;
firmly collapsing after gluing.

internal work only.

Metal liquid nails

There are special liquid nails on metal that allow you to glue it to various bases in construction, including concrete, plaster, brick and plaster, and not provoke corrosion. In this case, only neoprene formulations are used. Only they are able to glue metal sheets or just metal products.

Cyclone Glue instead of nails 99

120 r.

Characteristics:

shelf life - 18 months;
consumption - 300-500 g / m2;
the basis is butadiene styrene rubber;
full drying - 24 hours;

express grasp;
water resistance and elasticity of the seam after hardening;
strength.

Titebond Invisible Bond, Transparent, 380 g

220 p.

Characteristics:

shelf life - 18 months;
consumption - 300-500 g / m2;
full drying - 24 hours;

strength.

Liquid waterproof nails for bathroom

In rooms with high humidity it is advisable to use construction glue with increased water resistance. Choosing a product, be sure to make sure that this property is specified on the package. Liquid nails Waterproof for the bathroom are more often used when working with tiles - laying or facing. In this case, it is necessary to take into account that with such glue you will have less time for the correction, because the composition is quickly seized.

Isonail G815 for bathroom 300 ml

210 p.

Characteristics:

shelf life - 18 months;
consumption - 10 route meters;
time setting - 5 min.;
full drying - 24 hours;
the basis is synthetic rubber.

dries quickly;
suitable for non-porous surfaces;
resistant chemical
fills irregularities without shrinkage.

Macroflex MF915 Sanitary, Sanitary Mounting Glue, 400 g

158 p.

Characteristics:

shelf life - 18 months;
color - gray, beige;
time setting - 10-15 min;
full drying - 24 hours;
application temperature - from -7 to +40.

waterproof;
vibration resistant;
elastic;
you can paint.

Liquid nails for concrete

Concrete is more severe of all of all. It is often necessary to glue heterogeneous surfaces, such as plasterboard, rubber, plastic and even metal. In addition, many work is carried out outside, so liquid nails for concrete must suit this and in some cases even have frost resistance. Often they become a good alternative to the mounting foam and dry mixtures.

Glue mounting bison KM-250 Supersensive, EXPERT series, transparent, 300 ml

193 p.

Characteristics:

shelf life - 18 months;
color - transparent;
time setting - 10-15 min;
full drying - 24 hours;
application temperature - 15-30 degrees.

waterproof;
good adhesion;
impaired and vibrationary;
frost-resistant;
elastic.

STAYER BLACKPRO EXTRA FIX S-901 SUPERSILY, PROFI series, 280 ml

150 r.

Characteristics:

shelf life - 12 months;
color - beige;
time setting - 10-15 min;
full drying - 24 hours;
application temperature - from 10 to 30 degrees.

fast initial grasp;
strong durable connection;
frost-resistant and resistant to temperature drops.

Liquid nails for expanded polystyrene

The main advantage that liquid nails have for polystyrene and dry mixtures and polyurethane adhesives are rapid grasp. It makes the installation less difficult. All due to the fact that foam sheets or slabs do not have to sign, which often have to do when insulating the outer brick walls. But in such cases, they still recommend using both types of adhesive compositions. So the quality of the compound is significantly increased.

Glue Mounting Bison PM-900 polyurethane, extracene, EXPERT series, 300 ml

450 p.

Characteristics:

consumption - 300-500 g / m2;
color - transparent;
time setting - 10-15 min;
full drying - 72 hours;
application temperature - from 5 to 10 degrees.

2 in 1 - glue and sealant;
high high speed;
without smell;
resistant to UV radiation;
frost and vibration resistant;
durable, elastic.

Bau Master Mounted for expanded polystyrene, 31ml

85 p.

Characteristics:

shelf life - 18 months;
consumption - 200-400 g / m2;
time setting - 15 min;
the basis is a styrene-acrylic dispersion;
full drying - 48 hours;
application temperature - from 10 degrees.

incombustible;
elastic and impenetrable seam;
quick initial binding;

not suitable for glasses, mirrors and heavy designs.

Liquid nails for outdoor work

The main property that liquid nails for street work should have frost resistance. They must be well to resist and moisture. In this case, the strength of glue is equally important. The temperature differences and precipitate are capable of organic solvent-based compositions. Most of them have a sharp and unpleasant odor, but for the street this fact is not so critical.

Glue "Ultima 309" (for external work), 360 g

184 p.

Characteristics:

shelf life - 18 months;
color - light brown;
setting time - 3-5 min;
full drying - 24 hours;
application temperature - from 5 degrees.

even heavy structures withstands.

strong smell.

Titebond Heavy Duty, Superproof, 310 g

237 p.

Characteristics:

shelf life - 18 months;
color - light brown;
time setting - 20-30 min;
full drying - 24 hours;
application temperature - up to 18 degrees.

fast initial grasp;
even gluits wet and ice cream wood;
flexible.

long grasps.

Liquid nails universal

A special category of construction adhesives, which are used almost for any materials and under any conditions. These are liquid nails universal. They are characterized by optimal characteristics, because of which the scope of their use is much wider than that of other species. Although it is used for small repair work, because such compositions do not have a narrow orientation.

LN-601 MASTERTEKS Universal 310 ml

220 p.

Characteristics:

shelf life - 18 months;
consumption - 11 with a layer of 6.5 mm wide;
time setting - 10-15 min;
full drying - 24 hours;
application temperature - 10-30 degrees.

fast initial grasp;
suitable for wet rooms.

KRAFTOOL UNIVERSAL, 300 ml

153 r.

Characteristics:

shelf life - 24 months;
time setting - 10-20 min;
full drying - 24 hours;
application temperature - from 5 to 40 degrees.

gluits almost all materials, even polystyrene foam;
frost and waterproof.

How to choose liquid nails

Definitely answer the question of which liquid nails are better, difficult. It all depends on the conditions of gluing and the materials themselves themselves. One of the optimal options is considered "the moment of installation is specific." This composition is almost universal, suitable for gluing heavy cladding and even polystyrene. In general, when buying it is important to take into account the following factors:

The view of the glued surfaces. Water base is suitable only to connect porous materials. Smooth can only be glued with neoprene compositions.
Work location. There are formulations for internal or external work. There are those used in both cases. It is necessary to look at the packaging.
Weight glued details. In this case, it is necessary to pay attention to the strength of the selected composition, it is indicated in kg / m2.
Skill. If you first use any of the adhesives, better choose the one that slowly grasps. So you will have to better connect the details.
Packaging and manufacturer. Choose goods only proven brands. Cheap is "moment", he is the most common. Although there are many other well-proven manufacturers who are listed above.
How much do liquid nails cost. No less important factor and cost. Choose those options that you by pocket, follow possible stocks and discounts in building materials selling stores.

Video: How to glue a kitchen apron on liquid nails

Maria, 38 years

Most recently finished repairs. At the junction of the sealing corner and the bathroom was the gap. Several times they tried to fill it with silicone, but after a couple of days he dugs. We decided to try on such glue. For wet premises, we advised waterproof. Already lasts for a month, the joint is smooth and imperceptible.

Alexey, 32 years old

If acetone is present in the composition, then do not use adhesive for foam, it can do it. This is optimally only for glass and plastic. The foam is well glued in the presence of polymers in the glue. And do not apply drops or strips too close to the edges, it can smear when pressed. Delete it will be difficult, and it looks untidy.

Sergey, 41 year

Do not forget about the pistol for liquid nails. Without it, it will be difficult to squeeze the composition. At home, it was necessary to arrange a plinth room. Selected not the most durable liquid nails. We managed to order in the online store for sale several pieces with delivery by mail. After a week, the "moment of installation" already came, glued everything for half an hour, the month is held.

You can talk about glues for a very long time - the modern industry produces a huge amount. There are both universal and highly specialized adhesives - even within one trademark of their varieties can be calculated by several dozens. In this article, together with the site, we will talk about one of these adhesives produced under the auspices of the Henkel brand - "moment of liquid nails." We define them with their purpose, using and learn how to properly use this type of glue.

Moment Liquid nails photo

Glue liquid nails: varieties and scope

Scope of glue Liquid nails Mounting Installation is quite extensive, but their main purpose is fixing any wall panels and similar materials. The highlight of this glue is its elasticity even after complete drying. And this is what is necessary for gluing overall products undergoing temperature expansions. It is elasticity that allows the material to extend freely and shrink without risk to break away from the surface. Glue liquid nails in this regard is unique.

How to use liquid nails

To date, the gluem moment liquid nails are produced in ten varieties:

1. "Instant grip" - almost universal glue. With it, it is possible to combine both porous and non-porous surfaces - it easily copes with plastic, metal, brick, concrete, wood, ceramic tiles and many other materials used in construction.

2. "Express Decor" - perfectly copes with plastic, wood and polystyrene. In practice, it was widely used when installing ceiling baguettes from foam, all kinds of decorative friezes and panels made from PVC polystyrene and other non-heavy materials.

3. Moment installation "for mirrors" - the name of this glue speaks for itself. It is capable of connecting a mirror or glass with any type of surface indoor.

4. Liquid nails Mounting "Superxile Transparent" - is made under DGII labeling. With it, you can glue from wood, PVC, corks. It copes perfectly with plastic and MDF plinths. According to the manufacturer, it can even be consolidated by the door in the opening and install the windowsill.

5. Moment Installation "SuperSil". From its transparent fellow, it is distinguished by an exceptionally unpleasant color.

Varieties of glue moment Liquid nails

6. Moment Installation "Supersile Plus" - a modified version of the two adhesive compositions described above. All other qualities added the ability to use outdoors - glitters everything and anything.

7. "Very strong" - applied in compounds of heavy structures. If we are talking about securely glue a weighty object, then it is better to think better than this kind of liquid nails. In practice, such adhesive perfectly showed itself when working with and plates.

8. The moment the installation "for panels" - is used to install any types of panels on concrete, brick, wooden and any other base.

9. "Universal" - designed for all and at the same time for anything. In principle, something bad about this variety of liquid nails to say is difficult - in fact, this is averaged glue, which is used for the most part for gluing to any types of surfaces of light and medium weight.

10. Express - glitter quickly and efficiently. Designed for use both indoors and outside. Quite often used to finish facades with plaster or cement artificial stone.

Adhesives liquid nails photo

Liquid nails: Instructions for use

In fact, the moment of installation is unpretentious in use, but, like most of these adhesive compositions, has a lot of nuances. And the first, the most basic of all is the need to use a special pistol, without it to squeeze liquid nails from the balloon tedious. The gun is inexpensive and sold in any construction store at quite an affordable price - as a rule, we are talking about $ 4-10.

Pistol for liquid nails in use is quite simple. The metal tongue, which beyond the handle of the gun, is pressed by a finger, after which the piston pusher is delayed on itself, thereby freeing the place for the cylinder of glue. When the cylinder is installed, just in the same way the piston is pressed back. Now everything is simple - swing the curcken and squeeze the glue.

Pistol for liquid nails photo

Many people have a question how to open liquid nails? It is really easy. You are not wondering how to open a toothpaste tube or hand cream? There are two types of blockage of this glue - in the first case you will have to cut off the spinner part of the plastic tube, and in the second case, if we are talking about tin or paper cylinders, additionally puff a long nail protective film located in the depth of the nose. This defense is necessary in order for the glue to have time to reach the consumer without losing its qualities.

Okay, it's all the lyrics, let's return to the technology of the use of glue moment Installation of liquid nails. As everywhere, work on gluing something with liquid nails begin with surface preparation - dust, dirt, dropping paint must be completely removed. The surface of the walls and the glued material (if it is porous) you need to cover the layer of primer to increase the adhesion of the materials.

Liquid nails instruction for use

When the surfaces are dried, you can proceed to their gluing. Liquid nails are applied to one of the surfaces in two ways - either with solid stripes, or point. Select the method of application must be based on the type of product. For example, long panels, type PVC plastic or MDF, it is better to glue point, but the ceiling plinth is stronger if the glipp is glippped.

Liquid nails Application photo

Caused glue? Now we take a glit product and connect it with the base of the wall. Click tightly, if necessary, we cut a fist with a fist and tear off the product. What for? The glue must notice for 5-7 minutes. From this not anywhere - this is such a lack of technology. If you want to glue the surface, as the "tight" says, then you should not ignore this moment. When the glue is dreamed, the panel is attached to the place and triggers a fist. Here, in principle, all the technology - now you know how to use liquid nails moment mounting and you can safely start work.

Well, finally, a few tips for non-accurant masters - remove liquid nails not in the frozen state is tantamount to smear them on the pure surface, thereby spoiling it. First, wait until the glue dries, after which you gently cut it with a sharp blade - these are the moment of liquid nails.