Dial for homemade watches. Clock decor in the interior - time management (22 photos). Clock with wooden sticks

Karina Moroz | 11/9/2015 | 9525

Karina Moroz 9.11.2015 9525

Bored with the mediocre interior? We will share ideas on how to decorate any room with unusual hand-made clocks.

Happy hours are not observed. However, a decorative wall clock can become not only a great addition to any interior, but also an original gift.

You will need a clock mechanism (you can buy it in a specialty store or remove it from an old watch), some flat object to create a dial, and a little imagination.

This idea will appeal to creative people.

You will need:

dominoes;
strong glue;
clockwork;
metal sieve for straining noodles;
ruler;
ballpoint pen, marker or pencil.

1. Thoroughly wash and dry the sieve.

2. Use a ruler and pen to mark where the dominoes should be. Glue them to the sieve and leave to dry completely.

3. Install the clockwork as indicated in the instructions on its packaging.

Set the time on your watch and hang it on the wall.

2. Vinyl wall clock

You will need:

clockwork;
vinyl record.

Make a hole in the center of the vinyl. Attach the mechanism on the back, and arrows on the front.

You can give a vinyl record an unusual shape. To do this, you need to put it in a preheated oven for a few minutes, then take it out with the help of kitchen mittens and "blind" any figure from the melted plate.

3. Watch with a plant motif

If you are unable to get your hands on a clockwork, you can creatively remake an old wooden clock.

You will need:

wooden wall clock;
acrylic paint for wood surfaces;
brush;
spray glue;
rhinestones or beads;
printed color drawing with a floral motif (you can use beautiful wrapping paper or a piece of wallpaper instead).

1. Unscrew the clockwork.

2. Paint the edge of the dial with colored acrylic paint. Wait until dry.

3. Place the dial over the floral design and trace the outline of the watch. Then cut out a circle that is slightly smaller than the dial.

A beautiful wall clock is always a difficult source of information about the time, but it also decorates the apartment interior, giving it a special charm.

And if you think that making a wall clock with your own hands is very difficult, then you are deeply mistaken. This is a very real task that almost everyone can do. Indeed, for such a watch it is not necessary to assemble the mechanism itself.

In contact with

classmates

It is taken from old watches or taken out of cheap Chinese alarm clocks. And already on this basis, you decorate them to your taste, taking into account the design of your apartment.

What is a wall clock made of?

If you decide to make a wall clock on your own or make a grandfather clock with your own hands, then you need to know that this can be done from almost any material. Of course, wood is the most popular. Due to its properties, wooden clocks are made of various shapes and serve for a long time.

Usually, not only wall clocks, but also grandfather clocks are made from this material. By the way, drawings for the manufacture of wall clocks are usually not required, but they may sometimes be needed for floor structures with a more complex assembly.

Record watch

Plastic and other materials

Plastic watches are also popular. They are even more durable, but more difficult to manufacture. An original watch can be made of cardboard, and the simplicity with which it can be done is surprising. As a material for wall clocks, you can use paper or, for example, gramophone records.

Note!

It is quite possible to make a clock for the kitchen from a tin can.

The additional material used mainly for the manufacture of arrows is also very diverse. These can be tree twigs, buttons, pencils, or wire.

Cardboard clock

As we have already said, cardboard clocks are made quite simply, so now we will tell you how to make a clock out of cardboard yourself. In order to carry out this venture, we need the following materials and tools:

Clockwork. It can be taken out of old unnecessary watches.
A piece of corrugated cardboard. Its dimensions depend on the dimensions of your future product.
Wooden disc.
, PVA glue, kraft paper (special high-strength wrapping paper).
(fine-grained and possibly coarse-grained), hook, decorative elements.

Paper clock

The main stages of execution

First you need to take a disc made of wood (the same goes for a wooden clock), and use a puncher to make a hole for the clockwork. After that, we cut out two circles from cardboard and glue them on both sides and in one of them we also make a hole for the clockwork.

Having made the base for the watch, you need to glue the ends of the disc with cardboard, cutting out a piece with a width equal to the thickness of the disc and a length equal to its circumference. We fix it with PVA glue. Then you need to glue the watch over with kraft paper and, on the back side, fix the hook with which we will hang our product on a carnation. By the way, you can see a master class on making watches below.

DIY wall clock video:

Final works

Now we need to paint our disc black. It will be enough to do it from the front side. After the surface has dried, we make a hole for the arrows, using an awl for this. Now we need a silvery paint, which contrasts most successfully with the black color of the disk and use it to apply divisions and numbers on the dial. We paint the arrows with the same color. We finish our work by installing the clockwork and decorating the ends and edges of the disc.

Note!

This can be done, for example, with rhinestones.

As you can see from the presented instructions, almost any person can make watches out of cardboard.

Wooden clock

Let's take a look at how quickly you can make a wooden clock. To make them, you will need the following materials and tools:

Disc made of wood with a diameter of 330 mm.
Small diameter wooden sticks and balls in the amount of 12 pieces.
Clockwork.
Sandpaper, glue,.
Nippers and puncher.
Black cardboard and two colors of paint.
Pencil, scissors, ruler.

Step-by-step instruction

Sand the disc and balls to a smooth surface and dust them off.
Cut the wooden sticks to the same length. We choose the length ourselves.
Using a punch, make a hole in the center of the disc for the arrows.
Let's drill 12 holes at the end of the wooden disc. They will serve as grooves for the ball sticks. The distance between the discs must be the same. To do this, you need to use a protractor and make marks every thirty degrees.
Pour glue into the holes and fix wooden sticks in them.
At this stage of making a watch from wood, you need to treat the surface with a primer and, after drying, apply several layers of paint. The color of the paint, in our case, should be white.
Now we need to paint the balls in red (it is most suitable for a white disk). To do this conveniently, we need a piece of styrofoam and the remains of our wooden sticks. We string balls on them and paint, after which we insert them into a piece of styrofoam and wait for them to dry. For painting, we use a spray, since it is unlikely that it will be possible to paint evenly with a brush.
After drying, insert the balls into the sticks and "sit" on the glue.

The final step will be to install the clockwork on the back of the disc and fix the hands to it. We will make the arrows from thick cardboard, painted black.

It is interesting! do it yourself - master class

Paper clock

In order to make a clock out of paper, we need the following materials:

Clock mechanism and hands.
Dial made of wood or other dense material.
Decor paper and buttons.
Decoupage glue (plays the role of glue, varnish and sealant), ordinary glue, paints.
Small paper plate.
Ruler, scissors, pencil, pen.
Brush and foam brush.

Plastic watch

Manufacturing steps

Let's look at how to make a watch with your own hands in stages.

First, we cut the paper (choose the color that suits you), in the form of an elongated trapezoid, along the length of the dial. Moreover, all pieces must be the same in size and shape. The total area of the paper should be larger than the dial, so that later it would be possible to bend the ends. Then we fix the paper to the dial with decoupage glue and wait until it dries. After that, fold and glue the hanging ends to the back of the dial.
Apply decoupage glue to the dial surface in several layers. Each subsequent layer is applied to the previous one, but after complete drying. When applied correctly, the dial surface will become glossy.
We make dial markings. It is convenient to do this with a paper plate. That is, first we mark all the dots on the plate, then we apply it to the dial and put the dots on it. After that, in place of the numbers, we glue, for example, buttons or something else that your imagination is designed for.

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Comfort in our home depends on many details and trifles. Thus, most interior stylists agree that well-chosen curtains, lamps and lamps, blankets, pillows, carpets and clocks are integral attributes of comfort. Our master class will be devoted to the latter.

Everyone can make them, and there are hundreds of ways to do this. The most important thing in this matter is to install the clock mechanism (you can buy it in a specialized store or remove it from an old, no longer needed clock), and the appearance of the product itself remains at your discretion.

In this lesson, we will tell you about the most popular techniques that can be useful in designing an original watch.

Decoupage style watches

If you decide to make a watch using a similar technique, then you will need to purchase a ready-made blank template, hands and clockwork, patterns for the background on rice paper or napkin, acrylic paints, glue, varnish and other compositions necessary for decoupage in a specialized store. brushes, sponges.

To begin with, you should process the workpiece by covering it three times with acrylic primer and sanding it. After drying, it needs to be given the desired tone and texture. To make the surface of the watch look old and worn, it is better to apply the paint randomly with a sponge.

Next, you should outline a frame around the perimeter of the workpiece, stepping back a couple of centimeters from the edge, and paint it in a darker tone.

Now you need to paint the blank in the color that suits your interior. In our case, a light ocher tone was chosen (ocher mixed with white). Mix the paint and apply with a sponge. Let it dry completely, then sand the workpiece.

The bezel of the watch must be highlighted in color. For example, wood-like paint is suitable.

After that, you can apply the selected pattern to the workpiece. First, you need to cut it out of rice paper, and if the pattern is on a napkin, then soak it in water. Now we just apply it to its place on the dial and coat it with glue on top.

In the next step, you will have to use all your imagination and artistic skills, because you will need to remove the border between the napkin and the surface of the clock and achieve the integrity of the pattern with the background. To do this, you need to pick up paints of the appropriate tones and use a sponge to create a smooth transition from the pattern to the surface. You can also try to continue the pattern in the same style and use a brush to paint its elements along the surface of the clock and along the dark frame. This will definitely add brightness and liveliness to the image.

After drying comes the most interesting step in this process - the artificial aging of our watches. To do this, use a special two-step craquelure tool. It is applied with a dry brush in two layers, allowing each layer to dry well.

After its application, characteristic cracks appear on the product, which should be rubbed with copper powder. At the final stage, the workpiece is varnished.

Once the movement, numbers and hands have found their place, the clock will come to life and become a wonderful addition to your kitchen, living room or a wonderful gift for friends.

Quilling style

Quilling or paper rolling is an arts and crafts in which they work with strips of paper of different widths, twisting them into pattern elements, which then form a single composition. As a basis for future watches, a flat wooden board-plywood or thick cardboard is suitable. In our case, black paper was glued to the surface of the board, and the elements to achieve contrast were mainly made of white paper. You can choose any combination, as well as use any quilling elements.

The color scheme of the product should depend on where it will be used. At a minimum, it should fit into the already existing style of the room and not violate its harmony with its presence, on the contrary - strengthening this criterion. So the choice of color is the most important point in this matter.

To work in this technique, you will need strips cut from paper, glue and a hook or knitting needle on which you will wind the paper. All finished elements are glued to the surface of the future product. You can mark the tick marks, but this is optional.

First you need to make the numbers. For this, simple quilling elements in the form of tightly coiled spirals are suitable.

After the numbers, move on to creating the basic elements of watch decoration. In this case, flowers were chosen, consisting of the "drop" element.

Ready-made "drops" must be collected in flowers and all the blanks must be transferred to the surface of the watch.

Before adding the clockwork, you need to decorate the middle of the clock.

It remains only to place the finished watch in a frame under glass.

This version of the product is suitable for children's bedrooms.

From wooden sticks

In this case, you will not need a lot of materials, only wooden sticks, glue, sharp scissors and work hours with a flat surface. Cut out at least one hundred sticks and glue them like rays of the sun in several rows, making sure that the length of the sticks is relatively equal. It is advisable to make a second layer of longer sticks. This will create an interesting visual effect - the "explosion" effect.

This design will fit in an original way in the interior of the kitchen and living room.

False ceiling tiles

Such tiles, if, of course, they are made of plaster, will always look beautiful and with a special chic. Making our device out of this material is an excellent solution for creative and romantic people.

Gypsum ceiling tiles are called medallions among builders. A clock mechanism is attached to its back. A hole is made in the center for the arrows. In order for our product to have a laconic and at the same time sophisticated look, it is appropriate to apply an additional coating on it in the form of a matting paint or paint with a glossy effect.

You choose the color of the paint yourself, but it is worth remembering that initially the native color of gypsum, a material made to resemble marble, is beige, white, pearl, white-coffee and white-purple (pale pink).

Such an element of the room decor will perfectly complement the decoration of halls, living rooms, bedrooms.

Do-it-yourself watch. Step-by-step instructions with a photo

author: Bulatova Elizaveta, student of grade 6 B, MBOU "School No. 1", Semyonov, Nizhny Novgorod region.
Description: the master class is intended for schoolchildren, parents and creative children.
Appointment: interior decoration.
Target: making watches with your own hands.
Tasks:
- develop individual creativity, fantasy and imagination;
- to educate perseverance and accuracy.
Materials and tools:
1. Clockwork
2. Scissors
3. Glue
4. Decorative decorations (ribbon, rhinestones, sequins, red sisal, paper cord)
5. Ruler
6. Wire
7. Cardboard
8. Discs (7)
Safety precautions when working with scissors:
- work with scissors carefully;
- the scissors must be well adjusted and sharpened;
- put scissors on the right with closed blades directed away from you;
- pass the scissors rings forward with closed blades;
- when cutting, the narrow blade of the scissors should be down;
- store scissors in a specific place (box or stand).

Safety precautions when working with glue:
- when working with glue, use a brush if needed;
- use the amount of glue that is required to complete the work at this stage;
- it is necessary to apply the glue in an even thin layer;
- try not to get the glue on clothes, face and especially eyes;
- after work, close the glue tightly and remove;
- wash your hands and work area with soap and water.

S. Usachev "Clock"
The hours go by the days.
The clock runs over the century ...
- Where are you in a hurry, Clock? -
A man once asked.
The clock was terribly surprised.
Thinking.
We stopped.

The history of the invention and development of watches.

The first primitive concepts for measuring time (day, morning, day, noon, evening, night) to ancient people were subconsciously prompted by the regular change of the season, the change of day and night, the movement of the sun and moon across the firmament.
The history of the clock is very interesting and informative. It was important for a person to know the exact time in order to optimally plan his actions, so the sundial, water, and mechanical clocks were progressively invented. The result at the moment is those complex mechanisms that can be seen in modern stores.
The origin of the name of the word "watch".
The word "clock" appeared in everyday life in the XIV century, its basis was the Latin "clocca", meaning a bell. And before that, the first experiments in determining the time were associated with the observation of the movement of the sun across the sky. In 3500 BC, the first sundial was used. The principle of their work was to observe the shadow formed in sunlight, since the position and length of the shadow change at different intervals.
In Greece, they came to the conclusion about the need to divide the year into twelve months of thirty days each. Subsequently, the inhabitants of ancient Babylon and Egypt divided the day into hours, minutes, seconds, which played an important role in the development of watchmaking.
Jost Burgey made the first watch with a minute hand in 1577. This product also had a minute hand, the oscillations of the pendulum turned a cogwheel, which, in turn, changed the position of the hands on the dial. The dial was graduated at 12 o'clock, so the hand moved in a circle twice a day.
Currently, mankind possesses sophisticated, reliable and high-precision watch movements, created using the latest scientific research and designed in a wide variety of styles.
Unusual clocks, ideally suited to the interior of the room, are always a successful decor element. Not only in terms of aesthetics, but also in terms of functionality. These are the original watches you can make with your own hands.
A watch is a necessary, useful and, in general, common thing. Few people think about their design, because the main thing is that they show the time correctly.
But try to make a wall clock with your own hands - and you will notice that the atmosphere in this room has subtly changed.
Of course, it's not about assembling and adjusting the watch mechanism yourself - you should use it ready-made, bought in a store or taken from an old watch. But it is very possible to dream up the design of the dial.

Step-by-step workflow:

1. Two sheets of A4 cardboard are glued onto an A3 sheet.

2. A circle is made on a cardboard with a compass and then cut out.

3. Wrap the discs with tape.

4. We wind the paper cord on the wire.

5. Then we wrap the wire around a round stick to make a curl.

6. Find the middle of the circle using the ruler.

7. We glue the discs and start decorating the clock.

8. Cut out hearts from disks and wrap with ribbon.

9. Decorate the heart with red sisal balls and glue them on the clock.

10. In the middle of the discs glue sisal and rhinestones. We set the hands with the clockwork on the central disc.

Such a trifle as an ordinary watch can become the centerpiece of an interior if it is made by hand. The main thing in these watches is their uniqueness and the soul embedded in them.

Comfort and coziness in our home sometimes depends on even the smallest details and elements. Even most interior designers agree that the most important attributes for getting comfort in the house are well-chosen curtains, original lamps, soft and, matched in the right shade, blankets, pillows, bathroom rugs and clocks.

In this article, we will just talk about a master class on how to decorate a clock at home yourself.

There are a large number of photo watches on the Internet, most of them are made by famous designers, but making an original watch at home is also not difficult.

There is, of course, one key and difficult moment - the installation of the mechanism on the watch for its functioning, but the finished mechanism should be bought in the store and installed according to the instructions. But the appearance of the future watch and its rest of the design completely depends on personal preferences and tastes.

Several modern techniques are distinguished that help to independently make watches in any style.

Decoupage watch style

A similar technique for decorating and creating wall clocks involves working with a ready-made store template, where there is already a blank, the base of the arrows and the finished mechanism. You can also purchase ready-made patterns on paper, special paints, glue and other decoupage elements.

A blank for a watch is made in this way: several times the base is covered with a primer of acrylic paints, and at the end it is sanded. The desired shade and texture is given to the base in the next step.

There is one trick - if you want to make a watch in the old style with a shade that is frayed, then the paint must be applied with a sponge.

Decorating a wall clock with your own hands is a process of revealing fantasy and creativity from a person. Special water-based stickers can be glued to the base. Or you can draw a preliminary sketch yourself and transfer it to the dial.

After that, the finished mechanism and hands with numbers are already attached. After a series of actions, the clock, created with your own hands, will come to life, and will give the house a special original look.

Quilling style watches

Quilling is an arts and crafts process that involves working with straight strips of colored paper of varying widths. Such strips, as a rule, are twisted and glued to the surface, while creating the most varied patterns and pictures.

To create a watch using this technique, it is best to take a tree as a basis for a watch, since quilling elements can be well glued to it.

The color scheme should be in harmony with the interior of the room. After all, a bright clock will look ugly in a room made in the style of minimalism. Therefore, the choice of shade is a key moment in this matter.

Most often, multi-colored quilling elements are used to create flowers, insects, trees, animals, berries, and so on.

Plaster clock

Ordinary plaster tiles will serve well as a base for future watches.

Romantic and quivering natures will surely find a large number of solutions for creating watches from this material.

Among professionals, such a tile is called a medallion. The mechanism of the future watch is attached to its back. To make the product look more refined and restrained, its surface should be covered with matte paint in light colors.

And if you want some glare, then glossy paint will do.

Note!

This material is most suitable for creating a clock in a bedroom. At the same time, shades are chosen - beige, pale pink, pearl, the color of coffee with milk, purple and so on.

Clock with wooden sticks

In this situation, in your arsenal should be such items as sticks and quality wood, good glue, scissors, and ready-made working hours with a flat surface.