Sewer installation. Mounting rules of sewage pumps. Sewage installations Grundfos.

Comfortable living conditions are currently not a luxury, but a well-established life standard. If in country house or at the dacha complex conditions Standard samotane sewage, can help such a device as a household sewer unit. This device allows the removal of household waste, including water with faeces from toilet bowl, and pumping them on a specially mounted System to the provided place - a cesspool, central sewage, etc.

What is a sewer installation

Sewage installation It is a compact household pump, which consists of a rectangular plastic tank with an integrated pump. To the reservoir through the provided holes is connected to the toilet, and 1.2 or 3 additional flow from the shower cabin, kitchen sink or dishwasher / washing machine. There are many embodiments that are somewhat different by dimensions, the location of the inlet nozzles and pressure exit. When hit wastewater In the reservoir, the built-in pump pumbles polluted water into the pressure pipe, from where the drains can be displayed along the mounted pipeline in a specially equipped cesspool pit either in the central sewer collector. As a rule, the sewer installation is mounted directly by the toilet, and additional inputs are located on the ends or on back wall Installations in the form of G-shaped knees.

Some models of sewer installations are not intended to connect to the toilet and the rejection of water with feces, have only 1 or several inputs for the removal of dirty water from the shells, bathroom, household washing machines or dishwashers.

Those settings that are connected to the toilet and serve to remove polluted water with feces, are usually equipped with a grinding knife to eliminate the possibility of breaking with toilet paper and small personal hygiene toilets.

Domestic sewer installation

Consider a typical home sewer unit.

Designations

1 - cord with evrovilk
2 - side entrance nozzle
3 - Formation for the floor
4 - upper entrance nozzle
5 - Air Valve
6 - Output connection
7 - top cover
8 - Reservoir

The pumping sewer unit comes "assembled", completely ready for operation, it is enough to simply connect it using self-regulating compounds with seals that are included in the kit. The air valve serves to remove the air, it has a built-in replaceable carbon filter to eliminate unpleasant odor.
The outlet nozzle has a built-in check valve to prevent the inverse movement of wastewater. The pump and the automation unit of the sewer installation are completely reliably isolated from water from entering, those m at least, according to the safety regulations you need to connect to the outlet with grounding.

Features of modern sewer installations

Sewage installation - This is a modern high-tech product with high quality and combining innovative developments and unique design solutions. Their features:

• ease of installation. The pumping unit is easily connected and runs to work.
• automatic work. The control of the pump is carried out by the automation unit that does not require constant human intervention
• good pressure capacities allow for wastewater pumping to the required distance, given the height difference between the floors of the house
• the presence of a chopper knife, which prevents clogging by toilet paper, small food waste and other inclusions
• design - the appearance does not spoil the interior, and optimally fits into the situation
• high quality execution and long service life

Principle of operation

The principle of operation of the sewer household installation quite simple.
Wastewater falls into the tank. When the level is raised to a certain mark, an electric pump is turned on, which produces polluted water to pump through the pressure pipe. If the drains stopped, the pump, by pumping until the specified level turns off. Turning on and off the pump is automatically due to the built-in automation system (example - pressure switch, level sensor).

Overview of household sewer installation models

Models of sewer installations presented in our online store are selected on the basis of the optimal value ratio and quality. In addition, they are quite popular and proven models having many positive feedback His owners.

Sewage unipump settings

Model	Power, W	Pressure, m (max.)
Unipump Sanivort 400 A	400	7	100
Unipump Sanivort 250.	250	5	8

Sewage installations Grundfos.

Model	Power, W	Pressure, m (max.)	Performance, l / min (max.)
Grundfos Sololift2 WC-1	620	8,5	149
Grundfos Sololift2 WC-3	620	8,5	149
Grundfos Sololift2 CWC-3	640	8,5	204
Grundfos Sololift2 C-3	640	8,5	204
GRUNDFOS SOLOLIFT2 D-2	280	5,5	119

Wilo sewer installations

Model	Power, W	Pressure, m (max.)	Performance, M.Kub. / Hour (max.)
WILO DRAINLIFT KH 32-0.4	400	5,7	4
Wilo TMP 32-0.5 1 ~	400	5,7	4
Wilo Drainlift XS-F	400	6	9,2
WILO TMP 40/8 1 ~	370	8	7,2

How to install

When installing this pumping equipment, you should consider both several key characteristics of the sewer installation and external factors. Here are some of them:

1. An indicator of pressure
2. Power
3. Maximum length Reset
4. Diameter sewer pipethrough which wastewater is carried out
5. The nature of the pipe laying is the presence of curved knees, turns, lifts, etc. All this has an impact on the efficiency of wastewatering. Curved turns of the removal pipe, reduce its diameter - all this leads to a loss of pressure and low efficiency of pumping

It should be taken into account that when pumping up the effluent on a certain height for further lead (for example, if the bathroom is located in the floor basement) A possible lead distance is reduced, since the pressure is lost.

In order to properly install the sewer installation and mount the discharge highway - we recommend contacting the specialists who will make preliminary calculations And competently implement installation.

Below is the option of installing the sewer installation with the connection of the toilet, the washing machine and the sink.

1- head nozzle, 2-pipe for air removal.

What to pay attention to the selection

Correctly select the sewer installation for home or cottage - the task is not very difficult if you consider the following information:

• The number and nature of the inlet nozzles, the ability to lead the flow from the toilet bowl.
• Volume of tank
• Installation Power, Head and Performance Indicator
• Availability of reliable automation controlling the work of the station
• Ability to use for short-term pumping hot water
• Availability of supply of all necessary adapters, nozzles and installation seals

This scheme displays the dependence of the drainage distance from the height to be rented dirty water. The pressure indicator is one of the important criteria for selecting the sewer installation.

Diagram of expendable characteristics - as an example of the dependence of the pressure and performance.

How to buy

Before you buy a pumping sewer installation - read it in detail its technical characteristics and features of operation. If you are not enough information to make a decision - contact our specialists. We will advise you for all the questions you are interested in, we will give maximum information and help choose the right pump equipment.

To be clean

The company "Pump-boiler" is not willed by cargo in Moscow and in the Odintsovo district for 500 rubles (in all the others - with a surcharge of 30 rubles / kilometer after the intersection of the Moscow Ring Road). Our customers highly appreciate the quality of purchased technical SystemsAnd therefore try to buy in the future new technique from us. We present the attention of consumers high-class equipment of the last generation, and now in line - sewer installation for 172.8 thousand rubles.

More about sewer installation

In many places, the direct-flow sewage without special pumps and auxiliary systems does not work at all. Even with a normal location, the locality is worth removing the collector from the connected object, as the principle of samotek ceases to work at all. Often the obstacle creates a complex relief, which extremely hampered the passage of the waste masses along the most convenient trajectory.

If you need a sewer installation, you can buy devices of a variety of categories in Moscow, and the differences between them are manifested in:

• unequal power;
• stability or instability to hot water;
• the volume of the noise generated;
• complexity of service work;
• presence in the scheme of one or two pumps;
• the presence of a crusher of waste or its exception.

The price of the sewer unit includes the payment of the cutting part of it, the design of the technique allows you to develop the necessary power to maintain kitchens, laundries, bathrooms and toilets. To eliminate errors and get a high-quality, well-minded system, the installation should be commissioned only by professionals. There is in the range of company offers from Linek Sanikondens, Sanbiik, Sanispid, Triamatic and others. The Sanivort 400 A complex is equipped with three injectors - toilet, shell and shower. The check valve restrains the waste of the pumped fluid inside the station, and the motor is equipped with an excessive heating protection device. An hour will pass 6 tons of uncleanness.

Where to order a sewage pump in a private house?

When the question is whether it is necessary to prefer whether to determine the parameters of its use, as it can serve a whole building or only one point. In addition, it is necessary to consider that:

• sewer sets have different power;
• not everyone is designed to work with hot water;
• some of them have a high noise threshold;
• not all of them are equally simple in service;

installation of installations is different: it may include one or two pumps or waste chopper.

Cellular pumping pump in a private house

Effectively copes with the work on pumping sewage drain, single-engine sewer pumping station (KNS) with cutting mechanism. It is installed in private households of small floors or at small business facilities. The power of the KNS is enough to provide wastewater and feces when operating the kitchen, laundry (washing machine), bathroom and toilet. It is the installation of a new generation and requires the installation and launch to conduct a professional.

Depending on the model and productivity of the installations, they can pump the drains of different compositions and in various quantities, therefore, before deciding the question of laying the sewage, especially in private households, it is necessary to consult a specialist.

Sewerage with pump

Most private or apartment buildings are usually equipped with a sewer of self-type type. Where the pipeline and plums are arranged at a certain angle, above the location of the point of the cleaning structure, septic or drain pit.

It is this elevation and creates that bias that is necessary for non-pressure sewer systems. But not all housing conditions or the specificity of the construction allows accommodation in this way.

To do this, it is decided to have a different order - use the sewer installation, which at times increases the performance and comfortable operation of the discharge of networks.

Sewage installation is a special pumping equipment, the purpose of which is to pump sewer and household waste and waste, grind them and submit them to the system of the pipeline to lead from the dwelling in special tanks and tanks.

Seasoning, where such an installation is assumed, are called pressure, and the most equipment that is installed - pumping sewer stations.

Photo: pump installation Near toilet bowl

The reasons why pressure sewage systems are equipped may be as follows:

• collector, drain pit, septicchka or any other cumulative or cleansing, taking drain sewer facilities are above required level For samotane sewers, i.e. higher than the initial point of relief of liquid household waste;
• capacities or tanks, as well as collectors are on too a large distance from a residential building;
• redevelopment of the bathroom premises, where it is supposed to put the toilet at the point removed from the drain nozzle, for example, move to the middle of the room;
• new point of the original plum or sanitary facility in social floor or basement, where the forced pumping of used water is required up pipes (bath, sauna or pool).

If such sewage equipment is installed for a toilet or kitchen sink, then the design of such a model should be equipped with a pump with a special grinder of feces and toilet paper.

And if the installation is intended for a bath or sink, then you can choose a model with a pump without chopper.

In any case, the function of sewage pumping plants is to turn off all household wastewater in forced order:

• streams with toilet bowls, bidets and urinal; Used water from baths, shower cabins and washbasins;
• soap water OT. washing machines and other household appliances for baths, toilets and kitchens;
• liquid with included fat particles and food waste, from kitchen sinks;
• water accumulated in basements or cellars.

All sewer installations have high pumping performance, silent operation, easy to install and unpretentious in energy consumption. They work perfectly with the drains of the horizontal location.

And their compact design has an aesthetic appearance and allows you to harmoniously fit into any modern interior Bathroom or toilet room or kitchen.

Principle of operation of internal and external sewage systems

Sewer pumping station (KNS) for domestic sewage.

Photo: The principle of operation of the sewer installation

Such portable equipment, as a sewer pumping unit for an internal sewage network, is designed to serve one residential object with people permanently residing in it up to 5 people.

Usually they are installed either near the plumbing structures of the type of toilet bowl, bidet, baths or shells, or in the basement of the private house, cottages.

Before you understand how any such sewage equipment works, designed to provide efficient work It is necessary to have an idea of \u200b\u200bits internal device.

Almost any model consists of such components as:

• 1 - a hermetic weld tank;
• 2 - cutting mechanism with a receiving filter;
• 3 - electric motor with a special winding that increases its power, performance and operational timing;
• 4 - special nodular design, which contains a dry electric motor, pumping device with check valvelocated in the pressure pipe and control unit;
• 5 - self-regulating coupling for connecting pipes;
• 6 - mischievous screws;
• 7 is a function that allows you to unlock manually;
• 8 - a separate drain with a coupling and a drain hose;
• 9 - pressure relays and levels are mounted outside the device so that no movable parts are present in aggressive wastewater;
• 10 - a compact design allows you to equip the installation easily connecting and adjustable in height pipes;
• 11 - several options for the output of nozzles;
• 12 - new bottom design with self-cleaning function and roundings in order to prevent excess formation of precipitation;
• 13 - fasteners that keep the design firmly;
• 14 - a removable alarm device;
• 15 - Universal motor suitable for all types and types of portable sewer pumping stations.

Photo: Pumping installation by elements

In addition to these basic elements, the design is usually supplied with a ventilation valve with a special filtering device and a locking device to avoid fluid transfuses, all sorts of adapters for convenience of connecting pipes in different directions, as well as electric cable from 1.2 m with a plug.

Nozzles, respectively, are important elements for connecting to the toilet, sink, washing or dishwasher, as well as to enter the pipeline system, going towards a cumulative or cleaning tank outside the residential premises.

The special membrane in the inlet pipe protects the plumbing from the return of wastewater from entering it.

The principle of operation of pumping stations for sewers is to accept the inspection, processing cutting part techniques, primary filtering and the output of the resulting liquid mass in sewage pipeline Distance from 100 m and further horizontally, up to 8 m vertically, depending on the power of the equipment.

Used water flows through the hoses or pipes to the installation tank when it is filled to a certain mark, the float rises, the operation of the pump and the cutting elements automatically turns on.

Then the fluid flows through the filters in the pipes that are outlined directly to the drain pit or septic. After the liquid frees the tank, the pump turns on.

CNS for external sewage

Exterior sewer pumping stations can serve buildings and structures with constantly or regular people in them from 8-10 people or more.

Photo: Sewage pumping station for outdoor sewage

Such installations are serviced by several houses, and even the whole quarters, in cases where there is no possibility for laying the samoton system of the external sewage pipeline: remoteness from the sewer collector, the slopes of the soil, which do not allow the drains to drain claimed facilities or tanks.

Therefore, such KNS perfectly copble with the task of pumping the drains into cumulative or treatment containers, septic tanks.

Important! Pumping stations for external sewage types can be serviced not only household sewerBut also storm, withdrawing rain and melting water to sewage treatment plants.

Photo: Sewer pumping station

Outdoor type installations operate automatically, which ensures uninterrupted sewage maintenance even in the absence of personnel.

This is significantly saved by labor costs, installation, arrangement and creates additional comfort in the operation of the equipment. The basis of the operation of pumping installations is the principle of cyclicity.

Flowing water from the pipeline of several objects enroll in the station tank and fill it up to a certain mark. As soon as the drains reach this mark, the pump and cutting elements, grinding toilet paper and other soft suspended particles entering the sewage drainage.

The pumping unit creates pressure for liquid waste, which flows later into the pipeline going towards drain yamam, Septic or immediately on sewage treatment facilities.

The flow rate in such devices is approximately 0.7-0.9 m / s. This speed is not enough for the flow of waste masses, but also for self-cleaning pipeline effect.

Design

Before choosing one or another pumping station, both for external and internal sewer system, should take into account some moments in order to avoid the most possible errors And prevent emergency situations.

For internal sewage

Important! For the most efficient and proper work The pumping stations for the sewage inside the house need to begin to decide exactly where you want to place this equipment: near the plumbing or in the basement.

If you plan to install it immediately for the toilet, and other plumbing structures such as a bath, shower or sink will be connected to it, then you need to definitely calculate all the parameters of the place where the station will be mounted.

Curlee and draw on the wall and semi all the necessary distances for laying and connecting to the pumping installation of pipes that come from plumbing, as well as pipes that come out of the house to sewer container, septicism or cleaning construction.

Decide where you have such pipes, and where plumbing will be located. It is desirable that the distance from the plumbing to the inlet nozzle of the pumping station was not more than 1.5-2 m.

Photo: Designing of pumping installation

If you plan to install the sewer pumping station in the basement, then calculate and consider all the locations of your plumbing and equipment that will be sources of supply to the sewage station.

Important! Must be supplied to such a pipeline shock reinforcement, in case repair work further.

Do not forget to take into account and necessary for which various adapters, tees and fittings can be used.

Photo: Using tees and fittings

For external sewage

With the design of this installation is not so simple. Here it is necessary to take into account the peculiarities of the soil and soil.

For example, as closely pass groundwaterIs there a stony layer in the alleged place for installation, whether special equipment is required for the digging of the pump station, etc.

First, always determined with the depth of the pit for pumping equipment, so knowingly you need to know the size of the KNS that you plan to install.

Important! Calculate the thorough height of the wastewater, as well as the depth of the passing pipe connected to the station. It is necessary to keep in mind the composition, view and volume of wastewater.

It can be fecal masses, fatty kitchen stocks with food waste, Talaa rainwater storm sewage, soap water from washing machines, bathtubs, shower cabins, shells or washbasins.

Photo: Pumping Station Design

It is produced, the depth of the pipelines, taking into account the soil freezing, the power and type of sewage pump pumps are selected, the corresponding pipe diameters, components for their assembly and others are selected. additional materials and details.

Important! When choosing the power of the pump, the length and height of the pipeline pressure line should be taken into account. If you want to use a not very powerful pump, then all possible natural biases of relief should be used at the maximum.

If there is no such possibility, then, respectively, the sewer installation is selected with the maximum powerful pump. The choice of pump power still affects the number of objects serviced or, simply speaking, the volume of waste management.

Everything design work For the equipment by sewage, villages, quarters or several groups of buildings and houses must have appropriate documentation.

This is, first of all, a development plan and a task for designing a sewage laying. In turn, this kind of documents should be drawn up on the basis of technical and economic justification (TEO).

Design at the level of documents is carried out in two stages:

• project documentation;
• work project.

The first is carried out in order to decide whether special survey work is needed due to specific location conditions, or it can be limited to simple installation work.

The second stage is necessary for coordination and taking into account all the necessary construction, fireproof and environmentally friendly events.

This includes drawings, estimates, custom specifications for the use of one or another special equipment and technicians technical passports served objects, scheme master plan, as well as an explanatory note with the technical and economic indicators.

The projects of any type of sewerage always take into account the calculated time, the possibility of construction and connecting new objects, and therefore the maintenance of additional volumes of sewage drain.

Installing the KNS and conducting pressure sewage

To set the pressure sewage indoors, it is sufficient to carefully examine the installation instructions, which is always attached to a particular model of the portable type sewer pump station.

In addition, all fasteners and components for conducting mounting work Also are the usual app to the equipment when it is purchased. It is important to consider that any type of pumping station should always be installed on a strictly horizontal and smooth surface.

Photo: Sewer pumping station outdoor type

It is also desirable to firmly and securely fix its reason so that it does not move from vibrations along the floor surface. All pipes and hoses should be attached to the equipment tight with maximum tightness.

Important! For installation of the CNS of the outer type, it is necessary to carry out more work volume than in the case of the installation of the pumping station inside the house.

First, you should dig up the suitable size, so that the pumping unit can be completely placed there. Further, be sure to concrete the bottom under the installation of the KNS.

This is necessary in order for the equipment to be reliably fixed and subsequently not at risk of displacement and slope. Thickness concrete site Must be at least 300 mm.

Concrete must quickly dry within 2-3 days. TO concrete surface The base of the station is fixed using bolts, brackets, stakes, or any other mounts. After all, the sewage unit should stand strictly vertically.

After installation with the help of the crane of the station, you can attach all input and output nozzles, tightly fasten them. With the backfilling of the ground, the station is gradually filled with water to balance the load on the body of the entire structure.

Photo: composition of the CNS

Such a sewer plant has a number of advantages that make it more and more popular today. This is compact, and therefore saving space.

The process of operation of the station is automated, and therefore does not require large costs Electricity. Using the minimum number of working personnel to control automation, as well as service techniques.

The equipment works quite silently and with a minimum of vibrations. Such structures are environmentally safe, and therefore recognized sanitary serviceslike the most optimal.

Price

The cost of these installations is entirely depends on the technical characteristics, manufacturer and equipment parameters.

So for portable pumping stations that are installed indoors, the market offers such price categories:

Manufacturer name		Pumping station parameters	price, rub.
SFA, France	Sanicondens Plus sewer installation	Performance - 0.38 cubic meters / hour. Power - 60 W. Voltage - 230 V. Weight - 1.9 kg.	4280
Speroni, Italy	Sewer installation Speroni Eco Lift WC 560	Performance - 4.8 cubic meters / hour. Power - 370 W. The pressure is 6.5 m. Input - 3x40mm, as well as 1x110mm. Designed for servicing the toilet, urinal, soul and shells.	7800
Grundfos, Denmark	Sewage Installation Grundfos Sololift2 WC-1	Serves toilet with horizontal output. Electric motor power - 620 W. The pressure is 8.5 m. Maximum flow - 149 l / min. Weight - 7.3 kg.	13800
SFA, France	Sanitop sewer installation	Performance - 6 cubic meters / hour. Power - 400 W. Voltage - 230 V. Weight - 5.1 kg. Serves toilet and sink. The pressure is 5 m. Noise level - 30 dB.	14950
Grundfos, Denmark	Sewage installation Grundfos Sololift2 CWC-3	Designed for servicing the toilet, bidet, shower and sinks. Electric motor power - 620 W. The pressure is 8.5 m. Performance - 8.22 cubic meters / hour. Maximum flow rate - 149 l / min. The temperature of the pumped flows is more than 75 ° C.	19600

For sewage stations of external use that can serve several houses, quarters and whole residential complexes and settlements, manufacturers offer such an approximate value:

Manufacturer name	Name of sewer installation	Pumping station parameters	price, rub.
Flotenk KNS, Russia	Sewer pumping station Helyx	D \u003d 1100 - 50	216000
		D \u003d 1500 - 65	405000
		D \u003d 2500 - 80, 100	675000
		D \u003d 3200 - 250	1620000
		D \u003d 4300.	1980000
Grundfos, Denmark KSB, Germany Flugt, Sweden	Sewage pumping stations	D \u003d 1100.
		H \u003d 5000.
		Pipeline diameter:
		D \u003d 50.	252000
		D \u003d 65.	378000
		D \u003d 2000.
		H \u003d 5000.
		Pipeline diameter:
		D \u003d 65.	525000
		D \u003d 80.	630000
		D \u003d 100.	693000
		D \u003d 150.	820000
		D \u003d 3200.
		H \u003d 5000.
		Pipeline diameter:
		D \u003d 150.	1365000
		D \u003d 200.	1680000
		D \u003d 300.	1890000
		D \u003d 300.	2205000

In cases where there is no possibility to equip the samotane sewer, there is always the opportunity to establish sewage system Press type.

To do this, use all sorts of sewer installations, as for internal systemsand for outdoor. Such equipment has a number of advantages and can be uninterrupted to serve objects not one dozen years.

But for right choice You need to know their device, parameters, specifications and operational features to competently design and calculate their installation and to avoid unwanted breakdowns or emergencies on the sewage track.

Video: Installations

As you know, in many houses, sewage drain flows gravity (non-free). During the construction of cottages and country houses Many people face a problem when it is impossible to install non-per-sliced \u200b\u200bsewer. In such situations, a sewage unit comes to the rescue, which forcibly removes the drains.

The sewer unit is forcibly removing the drains by means of pressure sewage.

It is very convenient if plumbing, appliances And the souls are below or at the level with risers, as well as at a considerable distance from them.

The principle of operation of such installations is simple: by pipes that connect the installation with sinks, bathrooms, toileties, etc. water flows into a special tank when it is filled, pump pumps the drains in central System, septic tank or drive.

Someone may have a question, and how much the distance is capable of pumping the installations.

It all depends on the set of factors:

• From the height between the release internal sewage and pump;
• Pipe positions (vertical or horizontal);
• Character character.

Conventional pumps are designed to transport the effluent vertically up to 7 meters, and horizontally up to 100 meters. But, as you know, not all pipes go strictly horizontally and vertically.

For clarity, it can be said that the pump can raise the stocks on the height (vertically) of 5 meters, and then drive them in a straight line (horizontal) for another 15 meters.

At the same time, the smaller the height difference between the pump and the inner, the greater the length of the pathway.

Depending on the nature of the drain, sewage settings are selected.

For example, the usual pump is suitable for shells and shower, for toilet bowls - with waste chipper, for pools and baths - high performance.

In general, all installations are divided into two categories:

1. General - one to the entire building;
2. Special - for each sewer point.

From this depend on their parameters and power. It is also worth paying attention to that not all pumps are calculated for pumping hot water.

Therefore, when buying, be sure to specify at what temperatures this unit can work.

Tip! Think in advance which category setting you need. Check out the information on manufacturers. And also read the consumer reviews on the forums. This information will be useful when buying.

The pressure of the pressure sewage is such that it uses the greatest demand from the owners country cottages.

For example, if a sauna or pool is located in the basement, it is hardly possible to do without it.

In addition, installation is mounted in offices and rooms, where it is necessary to install plumbing, but the distance to the central riser is significant.

The advantages of this unit include:

• Silent in work;
• Ease when installing;
• The maintenance does not require special skills;
• Compact and have modern design;
• The diameter of sewer pipes can be from 23 to 32 mm, which makes it easy to hide them into the walls.

By the way, the latter is possible thanks to the choppers installed in the building, which cut the waste into the tank.

The installation housing is absolutely sealed, the filter system and the self-cleaning function facilitate the care of it and prevent odor appearance.

The pump is running from the 220V network, the power consumption depends on the category and type of device.

On the this moment Sewage installation has won the greatest popularity grundfos production Denmark.

The Sololift + collection includes 6 models with built-in cutting mechanisms that allow the use of pipes of smaller diameter.

Thanks to these installations, you should no longer think about how to equip the kitchen or a bathroom closer to the sewer.

Now you choose a place, and the installation removes the drains. The models of this collection are small and fully prepared for work.

You only need to install them, bring the pipes, and the rest of the installation will make it myself.

In appearance and sizes, the devices are certainly different, but the device is the same: a plastic tank of a rigid design, it has a built-in pump, which has a thermal protection system.

Over the pump there are filter for solid waste and cutting mechanism.

Hydrodynamic relay is installed to control the level of water. The removal nozzle is equipped with a check valve.

Ventilation system Equipped with a gate device that protects against transfusion.

There are models that serve one unit, and there is for the bathroom in general.

But there are bans. Such an installation of the sewer is not able to work where a constant pumping of water is required ( public Toilet.) Or need to pump large volumes.

Also in places where Grundfos Sololift + installations are used, it is worth hanging warning signs.

They should write to them that throw in the toilet or other devices that serves this installationForeign items (except toilet paper) is prohibited! It is also not worth pouring solvents in them and other aggressive chemicals.

SPA sewer installations from France, also deserve confidence.

Each installation provides wastewater removal from all types of sanitary devices.

For example, SFASANI is able to transport drape vertically to a distance of up to 10 meters, and horizontally up to 100 meters. These are economical, silent, having a modern design design.

Installation of these systems does not require additional cash costs.

We mount it onto the wall or install on the floor, connect to the plumbing, we make a tap to the sewage, insert into the socket and everything, the installation works.

Additional holes that are equipped with the installation can simultaneously connect several items at once.

That is, using one installation, you can organize a bathroom or kitchen anywhere in the house.

But it is worth knowing some rules on the installation, more precisely recommendation:

1. In the pressure plumbing, it is necessary to provide a place for a plum.
2. If the pipeline passes on the not heated room, it is necessary to take care of the insulation of pipes.
3. When installing, stretching and stirring pipes, steep bends and bending are not allowed.
4. It is connected to the original sewage to the tube from the pressure so that the drains from the installation are under an acute angle to the main stream.
5. Combining two pressure pipelines from different installations not allowed.

Tip! When buying installation, be sure to take into account the place of its installation and the conditions under which will be operated. Choose a model with the desired output output and their location, as well as for a particular room.

And so what conclusion can be done? Sewage installation This is an excellent solution to the sewage problem where it is impossible to use a non-free system. It also gives a flight for fantasy when in the apartment. Now you can make a toilet or bathroom where we want, and not where the original sewer tube is running.