Old doors like new! How to decorate the doorway without door photo as you can reap the doorway

Stall repair B. own apartment, owners try to use all possible designer techniques To increase the space of small rooms. For this purpose, many refuse to install interroom doors, thus combining several rooms together. This solution allows you to expand the borders of the room and make it more spacious. But how to make a doorway without a door so that it becomes a real interior decoration, we will consider in our article.

Options for opening

So, if you decide to refresh your interior by opening, then I recommend deciding to decide on it future form. It can remain rectangular, acquire the form of the arch or get additional corners. In any case, the design of the interroom passage should fit well in the interior of both rooms. That is why it is not necessary to immediately go to the store for finishing materials, which will eventually become completely useless.

In order to successfully arrange a doorway without a door with their own hands, first of all, a sketch of the future design should be sketched. Consider the most popular ways to design passes between adjacent rooms.

Portal openings

This is the most popular and most simple design, which can be done with your own hands. In this case, the input retains the rectangular shape, but is complemented by a more massive finish with a variety of decor elements.

Usually it is necessary to remove the box and remove all structural elements to arrange such an opening. former doors. The resulting passage is equalized and subjected to decoration selected materials. Rectangular openings are suitable for both small and large premises, while the style of their design is most often strict and discreet.

Arch Passages

Door open-arches most often have a classic form. In such an embodiment, the arch arch is made in the form of a semicircle, the radius of which is equal to half the width of the passage itself. Oval openings are quite popular and easy to perform. However, before you choose this option, pay attention to the height of the ceilings in your apartment. In the rooms where the height of the wall does not exceed two meters, it is categorically not recommended to make a rounded opening, as it will visually lower the ceiling.

It is better to give preference to the arc in the form of an ellipse. This option is optimal for premises with low ceilingsSince the special form of the arch allows you to visually increase the height of the walls.

Operactions of irregular shapes

If simple forms do not satisfy the owners requests, you can experiment and create a more complex option. Since in modern interior design there are no strict rules, the form of the passage may be the most unusual and even slightly bizarre.

Often in the form of a trapezoid, triangle, semicircles and various asymmetric configurations, with oblique slopes into one of the sides. Also possible combination of several figures. For example, when the rectangular portal is complemented by rounded corners of a variety of radius. This design is used only in cases where the width of the doorway is greater than 80 cm.

Often in modern design projects you can see unusual openings equipped with point illumination, side shelves or bar racks. This approach not only decorates the room, but also makes the passage between the rooms of the functional element of the interior.

Special attention deserves construction decorated with colored glass, stained glass or mosaic fragments. This design is independently very difficult, so in most cases this work is trusted by professionals. It should be noted that complex and figured arches It can only be installed in cases where the width of the doorway is greater than the standard. Most often, such design is used in Studio apartments. In small and low rooms it is better to give preference to a strict classic style.

After you clearly decided on what form will be your passage, you can proceed to its finishing and choosing decorating elements. Let's start with the selection of the material.

Options for registration

By thinking how to make a doorway without a door, learn all possible finishes options and select the one that best suits your interior.

Today, the following materials are actively used for these purposes:

Decorative rock;

Polyurethane;

Decorative plaster;

Plastic;

As he represents each material and how with it, you can arrange a doorway, consider in more detail.

Wood

The most noble and spectacular finish with participation natural wood. There can be used the most valuable species of wood, such as ash, oak, mahogany and ram.

These species are characterized by presentability and durability, but too complicated in processing and have a high price tag. That is why products from pine are most popular today. It has an acceptable cost, rather durable, is distinguished by a beautiful structure and, most importantly, it is easy to handle with manual instruments.

Such arches are sold in the form finished productswhich can only be installed in the right place.

Alternatively, natural wood can use the MDF panels. They differ in light weight, affordable price and extensive colors.

Plastic panels

Plastic finish refers to economical options Decorating openings. The material is quite easy in operation, since it does not require preliminary preparation of the foundation and is attached to ordinary liquid nails.

Despite its simplicity, plastic panels look very presentable. They emphasize the rigor of the interior and create a contrast in the opening zone against the background of the walls adjacent to it. This design is convenient and the fact that plastic is resistant to moisture, and therefore can be used near the kitchen. A plastic finish can perform anyone, since even if any errors are made, a spoiled element can be easily replaced.

Polyurethane

If you think about how beautiful to place a doorway without a door, pay attention to the decor from polyurethane. It is quite dense, but at the same time flexible material, which is used to create imitation of heavy and expensive plaster stucco. Similar design looks very attractive, while it costs much cheaper than tiles and decorative stone.

Polyurethane stucco is attached using a special glue on a variety of surfaces. Lightweight material allows you to use it even on drywall structures. Initially decorative elements have white colorBut subsequently can be painted in any shade.

With this material, the door opening can be decorated with round or square collens expanding up. If room small size Either the massive elements simply do not fit into its design, you can decorate the walls of more elegant moldings from the same material.

Fake diamond

The decorative stone is characterized by the ability to make sophistication in the interior and emphasize the high wealth and good taste of the host. Today in the construction market you can find a lot of varieties of this finishing material that differs in color and texture. Of course, such a finish can not be called economical, but these costs are justified, because artificial stone in the interior always looks luxurious.

Finishing of the doorway decorative stone It will require a lot of effort, but the result is always impressive. In most cases, they are facing not only the passage, but also part of the walls adjacent to it. It can be used both symmetrical and asymmetric design. If the doorways are located close to each other, they can be issued in a single style. It seems to be smoothly overgoing cladding from one opening to another.

If you decide to use an artificial stone in the interior of your apartment, pay attention to the weight of your chosen material. Some species can greatly drag the doorway, which makes it impossible to use their use on plasterboard structures. In this case, it is better to give preference to options from plaster.

How to independently perform a stone finish?

1. First you need to prepare walls. If large irregularities are present on the surface of the base, they are eliminated by putty.

2. Next, begin to knead the glue. If there are easy options for cladding, they are attached to ordinary liquid nails. Heavy varieties, by type of clinker tiles, are fixed on a solution from cement, glue, lime and sand.

3. Facing the opening begins from the lowest section of the wall. The product is installed in terms of the level, smeared with glue and tightly pressed against the wall. If you do not want to additionally close the stakes of the stone in the angular parts of the opening, the material must be attached to the brass. The brick of the first row is located in bulk to the way, and the element of the next row is shifted inside, at a distance equal to the thickness of the finishing material. Thus, the alternating rows perform the design of the opening.

Curtains

If in the near future your plans do not include the apartment repair, but so I want to make fresh notes in the interior, show the mixture - hang curtains on the doorway. This move will allow simultaneously decorate and, if necessary, hide the passage between the rooms.

Fabric curtains successfully look at the openings of absolutely any geometry. The main thing is to pay special attention to the choice of colors and textures that they harmoniously fit into the interior of the room. Otherwise, there are no restrictions. May be sweaty with lambrequins, drape or restrained and lungs.

If the interior of the apartment is decorated in eastern styleHere, by the way, the product from a natural tree with a variety of chopsticks and beads will become an excellent decoration of the doorway. This option is attractive and by the fact that the dust does not accumulate and does not interfere with the circulation of air between the rooms.

Choosing curtains on the doorway, pay attention to the dense options. They are presented in the market in the form of fabric cords, which are complemented by various glass, shells and stones. Textile products Can close the entire passage or used as its framing.

This method of registration is attractive in that it can be easily accomplished with your own hands, and the available cost and variety of options allow you to change the design of the interroom opening at least every year.

Decorative plaster

Another simple way, how to arrange a doorway without a door - decorative decorative plaster. It will suit the owners who wish to perform work with their own hands, as this process does not cause special difficulties even in inexperienced masters. This design is considered rather durable and unpretentious in care. The dried surface can be easily colored in the desired color, so that the opening will well fit into any interior.

Before applying the solution, the base is aligned and masked the hts of fasteners. Next, the opening is treated with primer, after which they begin to apply the decorating composition. Using special rollers and stamps, the desired relief give the solution. After drying the plaster staining it colming compositions or covered with finish solutions.

Conclusion

As can be seen, there are many ideas, how to arrange a doorway without a door. When choosing a suitable style, you can seek help from specialists, and you can create your own and unique design project. The main thing is that all materials used in the interior are harmoniously combined with each other. Only in this case you will be able to create an original and attractive style design of the doorway. We hope you read the information turned out to be useful to you, and the photos posted in this article helped you with a choice optimal option Registration of the passage between rooms.

The doorway without the door is sometimes an original way out when solving the problem of combining the space of residential premises. So, for example, not all housing owners want to install the door between the hallway and the living room, especially if the planning of the apartment has. Quite often, the practitioner union of the loggia with the room is also made by removing the window and door Ramathat expands the useful area. However, both of the decisions put in the example above are created at the same time. new problem - Original and accurate design of the formed opening.

Today, the construction market presents a very wide range of various materials, which give the opportunity to arrange a living space in any style and for every taste. Therefore, there should not be problems on the incarnation of even the most intricate project. Moreover, it is possible to do with relatively low costs, at the same time richly separate the doorway with a beautiful and original platband.

It is not necessary to think that the design of this element of the interior is not as much as, for example, walls or ceiling. Until the latest decorative details are installed, general form The premises will not have the desired completion.

Modern designers developed a large number of design options door openingswhich are carried out using different materials. These include the following:

Decorative clinker tiles.
The stucco, made of plaster, or its imitation from polyurethane.
Plastic panels.
Fake diamond.
Natural tree.

In addition to, in fact, the selected shape of the doorway can be a decorating detail of the interior. And it can vary from traditional rectangular options to asymmetric complex configurations.

A finishing of any of the above materials can be performed independently, after developing a sketch of design and having the necessary tools and materials at hand.

Clinker tile

One of the traditional decisions of the opening of the opening - cladding clinker tiles under the brick

The finishing of door openings with clinker tiles has become in lately A fairly popular trend - this can be explained by a variety of colors of this material and the convenience of its use. Not only direct versions of the tile are produced, but also angular, which are convenient to sneak the angles of doorways, and they are suitable for both traditional rectangular shapes, and for the arch or half agear.

Most often used for external facade finishBut for certain premises and doorways is suitable as it is impossible, especially if it is harmonized with wall decoration. Sometimes additionally, in the complex with the doorway, they produce cladding with the same material and areas around the windows, so that the room immediately acquires its own style.

Sometimes clinker tiles are used in combination with smoothly plastered walls.

On the walls, according to the composed sketch, make markup. This process is especially important if the tile is laid out in the form of a chaotic asymmetric pattern.

The tile is placed in different ways, creating a smooth edge or toothed, stepped, often mounted with a displacement.

Before laying the tile, recommended to be facing the area on the wall additionally process, thanks to which adhesion improves building CompositionsAnd the material is guaranteed reliably glued to the surface. The primer before starting gluing the tile should be completely dry.

Close clinker tiles on the tile glue or "liquid" nails - the adhesive composition is selected depending on the quality of the wall surface. If the wall has flaws or small irregularities, it is best to use tile glue. The "liquid" nails can be used only at a perfectly smooth surface.

The glue on the reverse surface of the tile is very accurately applied. If a solution is used on a cement or plaster basis, then its excess immediately needs to be deleted, and it is better to try to do not be over the boundaries of the tile.

It is very important to ensure that the tile is laid smoothly horizontally. Control over this parameter must be carried out with building level Constantly during facing works.

When the glue is grabbing, these calibration planks from the seams can be removed and leaving the masonry to complete the solution.

After drying the glue, the seams between the tile are climbing suitable colorHarmonizing S. finishing material or with a shade of walls.

Fake diamond

Finishing with artificial stone is also a rather stylish option, especially since the choice of this material is even much wider than that of clinker tiles. It is made from natural breeds crushed into the crumb, which adds various polymers and dyes.

Artificial material imitates the appearance and texture. natural stone - It may be limestone, malachite, seven, jasper, marble and other breeds. There is an option that is simply called " wild stone", That is, who does not have processing, which looks very original.

The colors of this material are diverse, from cold gray to warm oaths, so it can always be selected under the shades of the interior.

The advantages of the surface finishes with artificial stone the following qualities can be called:

Presentable, aesthetic and stylish appearance.
Excellent harmony with other materials.
Resistance to mechanical damage with a properly conducted masonry.
Long operation time without changing the appearance.
Easy in everyday caring for decoration.

For the finishing of the doorway, the compact dimensions of the artificial stone are usually selected, with a not very deep relief pattern, otherwise it will look too cumbersome.

For corners, it is best to choose special corner elementswhich are convenient to install and securely fasten on the surfaces.

The finish of this material is carried out in different ways - sometimes it is placed, by observing a smooth border, but the technique of "Rvangery" is used more often. Using this method of masonry, the finish is obtained by a more natural, original and does not look "boring."

Of course, choosing one of the options for placing the tiles on the wall and in the opening, you need to rely on common style Registration of the entire premises.

The artificial stone is fixed as well as the clinker tile, one of tiled Adhesives or "liquid nails". It is necessary to take into account the fact that this material is much harder than the tile, since it often has a greater thickness, so the wall under its installation should be very carefully prepared, be sure to process in several layers by primer.

Facing with an artificial stone is quite a time-consuming work, as each of the elements need, gluing to the wall, for some time to hold for the composition to grab. In addition, it must be said that it is a fairly expensive material. However, he should be - the effect of a qualitatively completed finish will be amazing.

Lepunina, Natural Gypsum and Artificial

Leping around the perimeter of the opening without a door - columns with pilasters and capitals.

Nowadays, stucco inside modern apartments and houses can be seen quite rare, although it is one of the most interesting design styles, including doorways. Naturally, the stucco is not suitable for each interior - it should be set aside in a certain style, and in it all elements must be harmonious among themselves.

However, if one of the rooms are solved in a classic, doric, venetian or other similar style, where it is assumed and will not be ridiculous the presence of stucco elements, then the design of the doorway will be definitely "in the topic".

Earlier, plaster was used for the design of the premises and the facades, and the columns were often manufactured from natural limestone. Today, these interior details are also produced from polyurethane.

Gypsum stucco elements are quite high, so they are quite difficult to fix the walls. The installation is also complicated by the fact that the gypsum in the frozen form is very fragile, and even with a small height or with inaccurative actions during the completion of the facing, the finishing element may break into parts.

Gypsum stucco, it is, of course, the "classic of the genre", but work with it is hard enough

The polyurethane is very easy, perfectly glued and keeps on any surface.

Much more convenient in finishing - use polyurethane details "under stucco"

A very wide range of different parts for the design of the doorway is made - it can be borders, pilasters with capitals or even full-fledged columns that glue to the ceiling and wall.

Assortment of polyurethane parts with imitation of stucco - very wide

A variety of forms and embossed patterns of these decorative elements allow you to choose them on any, most demanding taste. It is very important that polyurethane is easy to staining, which can create a natural stone imitation or to make the surface of the details glossy and perfectly white.

Similar polymeric parts are produced for modern decoration - with a terrain that does not have floral patterns, elements of columns and capitals, and made in the form of moldings. Although they can also be combined with humble platbands that will complement arched or straight elements.

This variant of polyurethane decoration can be masked under natural tree or stone painting them fit color and covering varnish.

Installation of polyurethane parts is easily carried out on its own on one of the polymer adhesives, "liquid nails" or special "moment" glue.

Probably, it is worth noting that the columns and pilasters for small apartments do not particularly fit, as such details will overload the space, and it will seem even less.

If there are high ceilings in the house or apartment, which make rooms uncomfortable, it is worth rounding the sharp corners of the doorway and choose an arched version for this.

In the event that the polyurethane details are drawn up by the hall or the hall in the large area of \u200b\u200bthe house, to create pompousness and greatness, the best use columns decorated with doric reliefs.

Plastic panels

Plastic sets for registration of doorways can be purchased even in finished video - They are produced for openings of various forms: rectangular, arched and semi-arms, calculated for different heights and width. Tubes can be white or made with a texture pattern of one of the wood breeds that can have different shades. Pick up the color of the platband under the overall range of the interior will not be a lot of work, as well as install them on the walls of the doorway.

Usually, the finishing set consists of the following elements:

The platband that is fixed from the outside of the opening on the wall. As a rule, this element consists of three parts - the upper strip and two side. If the opening is made in the form of the arch, the upper part must be arched. If the opening is separated, which will be operated without the door leaf, then the kit must be two tyc, for one and the second side of the doorway.
Doblyar Planck, which is mounted directly on the walls of the opening by its thickness and closes it completely.

For arched opening, it must also be performed in a specific configuration. Some sets are made of sufficiently flexible plastic, so they are perfectly bent under fit form. However, acquiring such a kit, it is worth asking the seller to demonstrate the flexibility of the material immediately in the store.

The design of the doorways is such a plastic kit very popular, as it has a relatively affordable price and has positive characteristicsTo which can be attributed:

Ease of installation of elements that will be easy to perform independently.
Sufficient resistance to mechanical effects with neat operation.
Simplicity of care, since the material does not accumulate dust and is easily driven by a wet soft tissue.
The ability to disguise under the panel communication cables. Some sets have a special entrance for them to the inner space of the platband, located at the plinth level, and the design provides special channels for laying wires.
Plastic panels give the doorway accuracy and visually allocate its aesthetic framing.

Fastening to the walls of elements of plastic platbands and sobers is made in different ways - it can be gluing them to surfaces using " liquid nails", Sometimes they are attached to castle connections on special guides, which are included in the set of decoration.

Wooden finish

Wooden platbands are traditional for finishing door and window OperactionsBut not many know that they can have a variety of forms and design. Of course, having decorative elements cut by manually or on special equipment, It will be expensive, but also to be operated will be a very long time.

If necessary wooden padlings You can repaint, for example, if the entire interior of the room changes, including the color of the walls.

Finishing materials from wood can be selected for any design style - they may look very simple or to be decorated curved threads. An important advantage of the most material and products from it can be called its environmental purity.

In addition, it should be noted that even the most inexpensive wood, but well-processed and coated with the necessary means for maintaining the material, as well as decorated with paints and varnishes, cannot be distinguished from the wood of expensive rocks. To carry out these processes is completely simple, so they can be saved, acquiring or ordering the master of plates in non-treated form.

Despite the appearance large number New types of materials from which platbands are made, the tree will never lose its popularity and is often selected enough to design door openings of any form.

Form of door opening

Since the form of the doorway plays an important role in the design of the interior, especially if it is not planned to install the door, then this parameter is to consider separately. The doorway configuration may be familiar to many - rectangular, emphasizing classic style - arched, asymmetric, trapezoidal and other forms.

Arched opening

The arched configuration has recently become particularly popular with the doorway without a doors. This form has been widespread for the design of the passages both in standard apartments and in large private houses.

The advantage of a similar form is that it softens sharp corners. Visually Arch makes the ceiling above in the apartment conditions, and somewhat "lowers" it with too high ceilings in mansions. If necessary, visually "omitting" the ceiling, making the room more cozy, you only need to expand the arched opening, making it almost completely semicircular, without vertical sites.

In addition, such an arch will expand the space, and both rooms united by it will look much more.

Arched opening is usually set between living room and kitchen or hallway. This decision makes the design original, and the interior is more interesting. Each owner of the apartment, performing an installation independently, it gets the opportunity to make it exclusive.

Excellent, the opening is also suitable when uniting loggia with residential premises. Thanks to the expansion of the arched construction, the room visually will seem more than it really is.

Try to make the arch on your own!

Plasterboard in skillful hands turns in truly universal material, which opens up the broadest opportunities independent creation The most complex interior elements. For a diligent and neat owner of the apartment should not be particularly difficult manufacturing. To help him - a special publication of our portal.

Video: A variety of interior solutions with arched opening without doors

Trapezoid opening

The doorway of this form cannot be called popular, and its rarely can be found, especially in the context of the city apartment. It must be said that such a framing, especially having a dark shade, acts on the psyche somewhat oppressing. Similar shape may be more rational to use in large roomswhere it will not become a composite center for design, but neatly fit into it along with other decorative elements.

The relevance of the trapezoid opening in a residential premises - very doubtful

If all the same form is decided to use for the design of the opening in the apartment where there is not a very high ceiling, then you should not do too narrow the upper horizontal part of the trapezium. A similar form not only visually narrows the room and lower the ceiling - it will be as if weighing the interior and, oddly enough, spoil the mood.

Such "tough" forms may adversely affect the psycho-emotional state of the person.

Lack of smooth forms in doorway will make an uncomfortable room, even if wallpaper or other will be used for its general design decorative finish warmly shades. Therefore, if the choice of the shape of the doorway without a door is made, then it is better to refuse it immediately.

Asymmetric forms of opening

Options for asymmetric openings There are a great set - they may have smooth, angular shapes or combine several of the configurations. Choosing bizarre lines for opening, you need to not forget not only about the supporting structures of the house - not always the opening can be expanded on the intended width.

Asymmetrical openings - the widest field for fantasy owners

Highly important moment - this is psychological impact Forms on the mood of tenants. If you do not want constant skirmishes, irritability and misunderstanding in the family, it is best to avoid sharp angles and sharp forms of doorways. If without such outlines, it is still not to do, they need to be smoothed by placing smooth rounded transitions and forms.

Due to the fact that today in the construction markets it is possible to find not only the finished arched or asymmetric sets for the design of the openings, but also the mass of other materials, designers and entrepreneurs of amateurs are created by the most unreal decorative configurations. One of the materials that is most often used for such works is drywall. It is used to cover the structures created from metal galvanized profiles. These construction Materials They have a very affordable price, but for the manufacture of complex, decoratively decorated interior transitions, you will have to attach all your efforts and spend a lot of time, and also to pre-seriously work on the project, adapting it for a specific doorway.

Plasterboard - unique material for the construction of walls and partitions

Thinking up redevelopment, the construction of new partitions or the reconstruction of the available, it is best to count on the use of plasterboard. The special publication of our portal is dedicated to the process of independent creating internal internal.

In summary, it should be noted that the above presented options for designing doorways without installation of door canvases are not the only possible. It is quite possible to independently develop and implement your own project Registration of this element of the interior. At the same time, it is necessary to take into account the structural structure of the entire structure, since the extended doorway in some cases can weaken bearing walls And the overlapping, which is extremely dangerous not only for residents of the upper floors, but also for those who live in a reconstructed apartment.

If during the preparation of the project there will be any doubts, then for the calculation or even to fulfill all work it is best to contact the specialists. They will determine the opportunity carrier structures And they calculate the permissible limits of expanding doorways without prejudice to the overall design of the whole building.

When all repair work They are conducted independently, the processes of door facing occur with their own hands. Many materials allow you to update the door canvas very cheaply and at the same time qualitatively and for a long time. Some of the most popular materials are self-adhesive wallpaper and film. Today I will tell you how to enclose the doors on your own and what properties, and the advantages have materials with which the opening of openings occurs.

Advantages of the film and its sticking on the surface

Presenting a polymer material, the self-adhesive film consists of PVC on the reverse side of which the adhesive is applied. It is thanks to this that the film received such a name and became very popular for use on many surfaces. Before placing the doors with a film, you should know all the advantages:

Possessing some strength and wear resistance, the film can withstand minor mechanical damage and scratches
Film can not only arrange the door, but also update it after a long service life.
The simplicity of sticking allows you to perform all work on your own
Ease of choice - thanks to various textured or color solutions, you can choose the materials used for facing the doors in any interior solution.
With it hid small defectswhich can have doors
Behind the film is very easy to care - it is enough to rub with a damp cloth
Does not change its color under the influence of ultraviolet rays
It has the properties of moisture resistance - due to this can be used not only for interior doors, but also for surfaces in the kitchen or in the bathroom
The small cost for self-adhesive materials - thanks to this, the film has become an overcommodiable
Does not spoil the base

Since at that time I lived on a removable apartment and did not plan to be there for a long time, it just did not make sense to acquire new doors or kitchen furniture. But the external state still wanted to improve and therefore I decided to update the surfaces using such a self-adhesive film. In order to enclose the door leaf with their own hands, you should stock such materials:

Rule, meter and pencil - with the help of them are produced necessary measurements
Scissors or stationery knife - allows you to cut the self-adhesive material on the necessary pieces
Soft spatula - applied to smoothing during facing
Hair dryer - helps to take an angles and protrusions on the surface

Update the doorway is very simple and enough to adhere to such a sequence:

The door, like any other surface, should be prepared. The base should not have bold stains and be dirty. It is also necessary to remove all roughness and bursavar. But if you decide to update the lacquered canvas, then here everything is simple, it is enough to smooth out all the irregularities using fine-grained sandpaper
When materials are purchased, the surface is prepared, it remains only to make a flushing film. The required marking is easy to apply to the film due to the designation on the reverse side. In the future, the materials are pasted on wooden and other surfaces and smoothed by a soft spatula

Important! If bubbles remain after the finishing creel, they need to pierce the little needle and smooth out the sweat.

Wallpaper in the design of the opening

Very often in the design of the doorway use wallpaper. They can be used to highlight the passage or vice versa in order to hide this place and make it less noticeable.

Paper wallpapers are suitable for lining of openings, however, they, having resistance to moisture anyway, have a short service life. Therefore, it is better to accompany the surfaces for temporary use. Wallpaper tend to fade under sunlight and so soon they lose their attractive appearance. But if the salary will occur with acrylic wallpaper, then the term will increase significantly, and the surface will "breathe". Registration will be similar to vinyl, but unfortunately, less durable.

Important! There are also self-adhesive wallpapers, they can be applied to cladding various bases. However, self-adhesive wallpapers are not so patched due to low strength indicators.

If you want to qualitatively update the wooden surfaces with wallpaper, choose vinyl materials. They are more durable, moisture-resistant and have a huge amount of sample solutions. You can even pick up a picture applied to the vinyl tar and thereby make a fine partition between the rooms.

Lacquer for the design of old grounds

Very often to update old wooden doors Use non-self-adhesive films, but a lacquer coating. Wooden canvases lose their appeal over time, dry and require updates. If you decide to cover with varnish, then carefully reproduce to the preparation of the surface and the choice of the mixture.

The use of varnish is a laborious process, but it is able to turn the old wooden canvas into the work of art. With the help of such impregnations, even a nondescript pine can be similar to the expensive breed of wood. Do not save during the purchase of varnish - only qualitative material will exceed your expectations. Laccue should be covered not less than in 4-5 layers. Before applying each next layer, you need to polish and polish the previous one.

For independent work, stocking the following tools:

Wood varnish
Roller and brushes for hard-to-reach places
Rag and spatula with putty
Construction Fen
Sandpaper of different grain

Before covering with varnish, you should prepare the basis and remove the old paint layer from it. After that, all irregularities are polished and shut up with a putty. Before applying the lacquer should handle the surfaces with various impregnations, which will protect them from the manifestations of mold and the cores. If you want to reduce the amount of varnish spent, then carry out the primer of the base, which not only improve adhesion, but also reduce the consumption of the mixture.

RESULTS

The use of self-adhesive film is very in demand in matters of updating old surfaces and bases. Thanks to a huge amount of advantage, the film can be used even in rooms with high humidity. However, before use, you should know a few minuses that this material possesses: if the work was carried out poorly, then with time the canvas will begin to move away from the base, for the film is necessary preliminary preparationSince the material cannot hide big flaws. The film can be applied only once and after it becomes unsuitable for use. Provide all the little things in advance and only then proceed to design with your own hands.

To increase space, as well as easy to aesthetic purposes on interior partitions Remove door blocks. During the redevelopment of the apartment, most often equipped the free passage between the hallway and the hall. No less popular with a door without a door, uniting the kitchen with the living room. The expansion of space occurs due to the disposal of the dead zone, allocated to open the sash. However, the redevelopment creates a new problem associated with the design of the doorway without a door that the owner is sometimes difficult to solve.

In the house, not any way can be left without a door. It will be ridiculous to look like a bathroom or storage room. A solitary zone is considered a kitchen, a bedroom and an office, but for these rooms there is an exception to the rules. For the organization of intima, the finishing of the outlook is carried out by curtains, sliding shirms and other similar devices. As a result, a visual illusion of the separation of the rooms is created, while the space remains without the dead zone.

Open passes emphasize the integrity of the residential premises. All the purses make the same form and decorated with the material similar in structure, so that a single ensemble is.

From the door canvases are getting rid of the outlet between the kitchen and the living room or when one of these rooms is associated with the hallway. However, the visual separation of at least curtains is desirable to provide.

If a gas stove is installed in the kitchen, the room safety technique will have to extinguish at least the sliding system.

The free pass is shuting up when combining a hall or kitchen with a balcony. The process involves simultaneously removing the door and window box. If the balcony is equipped with a cabinet or a small bedroom, the rooms are separated by curtains or shirma.

When it comes to cutting the kitchen with gas stove, Often the passage is made in the shelves. On decorative racks arrange curly flowers, figurines and other elements.

Getting rid of the door not only expands the space. Through open passages freely circulates air. Even in a small apartment in the summer it becomes fresh.

When designing, the door of the door is not required in the following cases:

A modern solution when performing redevelopment is an interroom portal, which allows to preserve the rectangular form of the day. Without the door, the passage becomes freer, and the aesthetics gives finish from massive decor elements.

Arched passages are popular. In the apartment with high ceilings give preference to the classic, equipping the opening of a semicircular configuration. For the building with low ceilings, it is advisable to visually pick up the walls of the arch in the form of an ellipse.

The owners who like the passages of the wrong configuration are refused from the door block. When decorated, the arches of asymmetric shape, triangles, trapezoids are in demand. It looks beautifully a rectangular portal whose angles are rounded under different radius. The only minus is the limitation of the gabarita of the passage. It will not work out when it is less than 80 cm.

From the doors refuse when the passage of the passage by bar, stained glass elements, mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully decorated outdoor opening with the door block, you will reveal a number of advantages:

Created integrity of the space of the combined rooms. The apartment becomes free, light, while the functionality of each zone is preserved. The kitchen stays kitchen, living room - living room.
When the doorway is framed, materials that do not require complex care are used. The absence of a sash eliminates the shame of the box, the formation of the dead zone.
Without the door cloth, the work can be given the original configuration, which allows to emphasize the style of the interior of the entire room.
Establish an interroom portal even the most expensive materials will be more cost-effective than to install a high-quality door block.

The disadvantage of the open passage is the impossibility of using for and storeroom. In any type of design, the passage without a door is not able to provide intimacy of the specific purpose zone.

Free ventilation through open movements will bring great inconvenience when combining the kitchen with residential rooms. Smells during cooking along with fat couples will be separated throughout the apartment.

Forms

Perform the design of the outline with the preservation of the initial configuration or modify the passage. Often the design form depends on the materials used for finishing. An important role is played by the Master's skill.

Of all the types of door openings, the simplest option is a classic rectangular form. Collect such design under the inexperienced person. For the design of the day remove the entire door block along with the box. The ends of the walls along the contour are separated by decorative facing. If it is difficult to dismantle the thumb, you can only delete one sash. The remaining elements of the frame to seve MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the box.

In the case of arched outlets selection of forms huge:

Classic is considered semicircular arch. The transition is suitable when combining any rooms. If low ceilings in the apartment, from a semicircular arch is better to refuse or expand the passage.

Arki. trapezoidal Forms are easier in manufacture, suitable for apartments with low ceilings, often installed when combining a kitchen with residential premises. However, the designers of the trapezium are rarely due to the association with the form of ritual accessories.

Fans of unusual configurations give preference triangular Arch. The design has many subspecies, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipping doorway asymmetric Forms. Design is easier to make from drywall. For registration are used lED backlight, shut down niches, shelves and other decor elements. Asymmetric structures allow you to hide large traffic defects and the most interior partition.

How to improve the doorway?

When designing a loan without a door, almost any material used to finish the walls will be suitable. Budget option is an plasterboard design With subsequent painting or wake-up. Optimally select GCC in the manufacture of an asymmetric form. Impasso will cost plastic or MDF.

Of the more expensive materials for decorating the doorway, artificial stone, tiles, valuable wood breeds are used. The vertex of art is the registration of the passing passage.

Choosing an option to finish the doorway without a door, you need to take into account the style of all the premises. Registration must harmoniously enter the interior passage, and not to highlight it with a separate design.

The portal in the apartment is equipped with two types: full - with top and side elements, double-sided - only side faces without top. Similarly include the installation of the threshold and platbands or refuse these elements.

Installation of slopes and plasterboard arches

If it is decided to perform the arrangement of the doorway without the door with your own hands in the form of the arch, it is better to use drywall for decoration. Sheets are inexpensive, it is easy to cut and mounted. In the manufacture of the arch collect the frame from the galvanized profile. Designs give the form of a future day. The frame is cut by car fragments carved from sheets. Fixation occurs with self-drawing. The finished arch is treated with a primer, glued a perforated corner, put off, and after drying, grinding.

If there is no desire to build the arch, the drywall simply stones down. To further reflect the doorway use paint on water based Or glue wallpaper.

How to separate the doorway with a stone?

Stylishly looks like a decoration of the portal with a decorative stone. The material is made of natural crumbs with the addition of coloring pigments and polymers. When framing, the opening rarely adhere to smooth borders. Most often, preference is given to ragged edges. To aesthetically decorate the door passage indoors, use a stone with a small almost smooth relief pattern. Elements with deep texture create bulky structures. They are used to finish opening entrance doors from the street.

The decorative stone is well cut, but it is better to use ready-made angular elements for the corners. Installation is carried out adhesive solution For tiles or liquid nails.

Finishing with the help of goodbirds and platbands

It is easy and tasteful to make the finish of a rectangular door passage and, made in the form of planks. Elements are made of wood, MDF or plastic. The latter look less aesthetic.

From the MDF there are usual, with the edge on the end and telescopic. In the first version, the edge of the plank without decorative coating. You need to customize the joints. Dobors with edge have a complete view. The end is stuck with a decorative film and in the case of flaws, the joints look pretennively.

Produced flat, rounded and other shape. Wood planks can be decorated with carvings. Installation of elements is carried out on glue, nails or screws. Telescopic platbands are fixed by the lock to the pre-assassinated bar.

Finishing Interior MDF

MDF panels will be beautiful and inexpensive finish Portal, only from a similar material is also selected. The lack of facing is the fear of dampness. MDF better Do not use for registration of the passage connecting the kitchen with a residential area. If the furnace is organized good system Exhaust, then the material is dampness threatening.

To sew the door pass MDF, first build a frame from wooden Reques. The panels are cut in size and secured with special metal clips. Between themselves, the planks are joining the castle compound "Schip-groove".

MDF panels without locks are placed on adhesive solutions. The frame is not constructed. For gluing, planks prepare perfectly smooth surface. The jokes are closed with a decorative strip, and the edges of the passage are framed by platbands.

Decorating the doorway plastic

The principle of refrigerated plastic reminds the finish of the MDF panels. Only the material is distinguished. Plastic PVC panels fix to the frame with fastening clips or glued. The completion of the framing serves as a platband from a similar material that is secured to the guide bar.

PVC panels are separated doorway Rectangular, semicircular and other configuration. The shops sell ready-made sets for cladding arches, you only need to choose a product in the size of the passage.

Advantages of polyurethane stucco

Gypsum stucco is rarely used due to fragility and greater weight. If the apartment has high ceilings, and a venetian or other similar style is chosen for registration, then the decor of the doorways is carried out by polyurethane elements. The material is fragile, light, leaning in color.

To mount such a stucco, a smooth durable surface is prepared. Pre-treatment of deep penetration primer is carried out. Elements are fixed with a glue mixture. After soaking glue, the joints are putty, and then grind the sandpaper.

Tree decoration

Lovers of natural materials prefer the portal of wood, lined with swore and platbands. In the manufacture of the door portal, you can even use even cheap wood from pine. After good grinding, processing protective impregnations And painting with varnish material will be difficult to distinguish from the wood of valuable rocks. You can decorate a wooden doorway portal with a carved ornament.

Installation of elements on the framework. First mount the smooth bar on the slopes, then the plates are installed. Facing the doorway with self-draws is fixed. The caps are interinted in the drilled housing holes, and in the top are rubbed with a putty. Cashbinds glue, fixed with nails or self-drawing.

Curtain decoration

A simple option to issue door loops without a door - hanging curtains. The whole process is to fix the cornice over the passage. Curtains will hide off without a door from the Furniture field, distract attention, do not grind space. The main requirement is not to apply the curtain with horizontal opening. They will be an obstacle to the free pass. Optimally use curtains for door openings with vertical closure. In the open state, the curtains are tied up to the wall.

If you make a maximum effort, decorate a free interior passage will be better than the door block. Subject to the use of expensive materials, it is desirable to use the councils of specialists so that the costs are not in vain.

The name "doorway", first of all, implies a design to install the door canvase. But not always the presence interior door It is appropriate and practical, which may be due to both the characteristics of the planning and the limited size of the rooms.

In such cases, this element, turning into an independent detail of the interior, It perfectly deserves the host of housing to pay due attention to his finish.

What is this interior element?

This is an open opening, providing a free message between adjacent premises of residential apartments.

Lack of door in such a design saves up to 1 m2 area, Verify various forms and sizes to the work, as well as visually expand the space and erase the border between the rooms, combining them into a single ensemble.

Forms

Theoretically door will you can give any form (even round), but here it should be considered how function is that or another design.

The best thing give preference to one of the most common options, such as:

Arches themselves may also be of various shapes:

ellipsed;
rounded;
trapezoidal;
asymmetric (having braid bias on one side).

Options for registration

Modern design ideas include several ways Decorating opening. Some of them will be paid to the following.

Finishing with artificial stone

This material is most often used to finish cafes, shops and other public places, but in some cases it is quite it is appropriate as a facing of doorways Residential apartments.

Decorative stone finishes suitable for:

spacious premises;
rooms with a small number of furniture;
giving the placement of a certain design style;
wall flaw masking.

To the artificial stone with the most harmonized with the interior, you need observe some rules.

When cladding a rectangular doorway bottom part Masonry must be wider The above (see photo). This technique will allow smoothly to turn to the walls of the walls. When decorated with arched opening, the top of the design is decorated completely, due to which its rounded form will be highlighted.

Facing the doorway must be performed on all sides Not excluding the slopes themselves. It will simplify the task of designing walls and the ceiling in combination with a stone.

Laminate

Separate interroom openings of doors and arches can be laminate budget and relatively simple decor. One of the main advantages of this facing option is the ease of processing material, which allows it to give it almost any form.

Installation of sheets are performed either on the frame, or gluing them directly to the surface of the opening. Frame mounting method suitable for wide opening, Since the installation of the crate entails a decrease in space.

MDF panels

The appropriate option in order to decorate the slopes "under the tree". Facial side of the material may have different coating(Veneer, PVC, ECOCHPON), any of which gives panels an external similarity with wood valuable rocks.

Facing with their own hands

Consider the doorway finish on the example of MDF panels. Tear away MDF panels can be in two ways on glue or with crate.

Facing using glue consists of the following steps:

If the base is a "naked" brick or concrete surface, fulfill its finishing of plywood or MDF, which fasten to the wall of the dowels.
Next panels are placed and cut into size.
The back side is lubricated with glue "Liquid nails", which apply a zigzag strip.
The material is applied to the base, and after 5-10 minutes, the surface is closed with a rubber hammer.

Fastening panels on the crate though it is characteristic of the previous process, But also does not constitute anything difficult:

In the opening mount the frame from wooden rails or metal profile, Fixing them to the surface with a dowel.
At the top and bottom of the carcass self-drawers fasten start guides. They insert cropped fragments of facing, which are attached to the frame with the help of all the same screws.
Upon completion of the installation of panels for the external perimeter of the opening mounted ticket.

Watch the video lesson about refining door opening:

It is clear that the opening of the opening is a complete and, moreover, responsible procedure for the design of residential premises. With the right approach, this element will be a qualitative addition to the interior of any style.