Make a wooden outdoor table with your own hands. Do-it-yourself table for giving (44 photos): choice of materials and tools. Decoration. Making a wooden round table

A table - kitchen, computer, magazine - is needed in every home. Of course, the easiest way is to go to the store and buy a ready-made product there, especially since their choice is very wide today. But wooden table in my own way
the designs are quite simple. Accordingly, it is quite possible to make with my own hands. There are also quite a few options here. In particular, it is really possible to make a countertop not only from new, but also from old boards.

That's not all. Very beautiful table for giving can be made from unedged or terrace board. It is easy to make portable structures. The simplest is to attach the legs from the old ironing board to a tabletop cut out of plywood or OSB board. You can take this table with you for a picnic. Agree, it's more convenient than eating from the ground. In order to make a simple wooden table with your own hands, you do not need any special skills. Another plus is that you can do without a special tool.

Do-it-yourself board table - what you need to know

So, let's look at how you can make a much-needed item at home. There are some general points worth highlighting here. In particular, as a material for the manufacture of countertops, you can use:

boards;
plywood.

Their quality should be given special attention, because the main load will fall on the countertop. Therefore, the thickness of the boards must be at least 25, and the width - from
100 to 150 millimeters. In addition, do not forget to carefully inspect the wood for defects. All of the above also applies to sheets of plywood or chipboard. They must be strong to withstand permanent loads. legs homemade table best made from timber. However, boards can also be used here, arranging them with the letter “G”.

As mentioned above, you do not need any special tools for making a wooden table with your own hands. Here we need a hacksaw for wood or a jigsaw, a grinder, a screwdriver with nozzles and drills. If you do not have one of these tools, then it is quite possible to borrow it from friends. To apply the markup, you will need a tape measure and a simple pencil, and in order to process the finished product, you will need to buy a roller and brushes. Well, consumables - sandpaper, varnish / stain, paint.

Now let's look at how to make one of the simplest table options. First of all, we need to make a tabletop. For this, first
it is necessary to cut a square or rectangle of the desired size from a sheet of plywood or chipboard. This is easier and faster to do with a jigsaw. Next, we need to make a frame from the boards. Its size can be equal to the countertop. However, there is also an option with an indent of about 2 centimeters on each side. This is where your personal desires come into play. All connections are made with self-tapping screws.

Now we need to prepare and attach the legs. Here you can use a bar or all the same boards. In the first case, you will need to drill holes for furniture bolts. If you make legs from boards, then they are connected to each other by putting them on glue. Don't forget that in this case we need a perfectly straight line. angle, that is, 90 degrees, no more and no less.

For greater reliability, the legs can also be fixed with self-tapping screws. In this case, do not forget to make holes with a drill. Their diameter should be slightly smaller than that of self-tapping screws. Otherwise, the wood may simply crack. It is better to drown the hats of self-tapping screws in the leg. To do this, use a larger drill to make the appropriate holes. They can then be hidden by covering with putty, or using plugs. desired color- they can really be purchased at any furniture store. You can attach such legs to the table with screws or bolts. Before doing this, do not forget to carefully sand their surface. Essentially, that's all. It remains only to take care of the aesthetics of our table by treating its surface with paint, varnish or stain.

Let's go back to the table. After all, it can also be made from boards. The first thing to do here is size. It is best to make a table in such a way that you do not have to spread the boards along. Of course, if there is a circular, then this is not a problem. But a centimeter in one direction or the other does not always play an important role. So you can make your job easier. So, we cut the number of boards we need in accordance with the selected table size. Naturally, they should all be the same thickness.

Next, glue the side parts of the blanks (with the exception of the two extreme ones) with glue, lay them on flat surface and tightly pressed against each other with clamps. The number of the latter depends on the size of the table. Let the table top dry. As a rule, it takes at least 24 hours for reliable fixation. Then you can remove the clamps and proceed to the next stage of work. We need to align the edges of the countertop, and then sand its surface.

Now finishing touch at this stage. It is recommended to attach a thin bar around the perimeter of the table top. This will make the product more beautiful. Attach the bar with finishing nails. Both wood and plastic of the corresponding color are suitable here. In the first case, the bar will need to be pre-sanded and then processed together with the entire countertop. If the option with plastic is chosen, then this decor element clings at the very end, when the table is already covered with varnish, stain or paint.

Then it remains only to attach the frame to the tabletop, and then install the legs. However, if the table is small, then some changes can be made to the design. It's about about the rejection of the frame. In this case, the legs should be attached directly to the countertop with self-tapping screws. Here, too, you will need to drown the heads, and then hide them under putty or plugs. It is worth noting that these are the 2 most simple options for making a table from boards with your own hands. But speaking in general, there is nothing particularly complicated here. The main thing is to do everything slowly, controlling the quality of work at each stage.

The table is an essential attribute kitchen interior. At the same time, it should not only combine style, beauty and comfort, but also be quite reliable. And what could be more reliable and durable than natural wood? The problem is that high-quality wooden furniture is not cheap, so not everyone can buy it for their kitchen. However, do not despair, because making a wooden table with your own hands is a completely feasible task for a person who is able to distinguish a screw from a nail and knows how to use a drill, a jigsaw and a grinding machine.

The choice of kitchen table design depends on several factors, such as the size of the kitchen, the number of occupants, and the interior design. If you look at the options that furniture manufacturers offer, then among the whole variety of designs, three categories can be distinguished:

tables of medium size for 4-6 people;
overall tables for big family or receiving guests;
practical folding tables for small kitchens.

A table in the kitchen should combine three qualities: aesthetics, convenience and practicality.

To do kitchen table with your own hands, you need to have at hand a drawing of the product, the necessary set of tools and at least some skills in working with wood. Below are design options for standard, large and small kitchens with photo instructions and detailed description each stage of the manufacture of a wooden table.

Rectangular baluster dining table

Rectangular design with standard size 1200x600mm is considered the most popular due to its practicality. This table can easily accommodate a family of 4 people. In addition, it can be installed both in the center of the kitchen (if space permits), or placed close to the wall in order to save free space.

schematic drawing

In order to make the wooden table more attractive, we will use balusters instead of straight legs. If there is no lathe at hand, then such legs can be ordered separately at the nearest furniture workshop.

For your information! Balusters are figured pillars that are primarily found on the railings of stairs, balconies and roofs. However, the use of these elements in the manufacture of kitchen tables is also far from uncommon.

Drawing rectangular table on balusters

To assemble the product you will need the following materials and tools:

4 finished baluster legs 720 mm high;
furniture board 30 mm thick for countertop;
board 20x100mm for the frame;
wood screws about 30 mm long;
drill (screwdriver);
a circular saw;
grinder;
sandpaper of different grain sizes;
building level;
square;
roulette;
wood glue.

Step by step assembly instructions

A do-it-yourself kitchen table made of wood on balusters is made in the following sequence:

We prepare the cross members of the frame. To do this, we cut a 100 mm board into 4 parts (2 by 400 mm, 2 by 1000 mm), after which we remove the burrs and bring the surface to a smooth state with sandpaper or grinder.

We take the balusters and connect them in pairs with short crossbars (400 mm), making a small indent from the edge of the leg (about 15 mm). Fastening is carried out by means of glue and screws, which are twisted at an angle from the inside of the board.

Tip! In order to prevent the appearance of cracks, it is better to pre-make holes for the screws.

Fastening the short crossbars to the legs

We connect the finished pairs of legs with long crossbars (1000 mm). The fastening algorithm is the same as in the previous step.

The final stage of mounting the table frame

After we have made the frame of a wooden table with our own hands, we move on to the countertop. If it comes to the kitchen, then it is better to purchase a ready-made furniture board. Although for a gazebo or cottage, where the requirements for the appearance of the tabletop are not so strict, it can be assembled from grooved boards.

Furniture board for countertop

The finished tabletop must be connected to the frame. To do this, lay it face down on a flat and clean surface, and evenly place the base with legs on top. The fastening of the crossbars to the tabletop is carried out with screws according to the same principle that was described in paragraph 2. However, in this case, you must be extremely careful not to drill through the countertop.

On this, the manufacture of a kitchen table with your own hands can be considered almost complete. The last stage is characterized by the process of grinding the surface, as well as the application of stain or varnish, the color of which is matched to the interior of the kitchen.

Note! The number of layers of varnish depends on the type of wood. Hardwoods, such as oak or hornbeam, do not absorb varnish well, so 1-2 coats are enough in this case. But for pine or spruce, you will need at least 3 layers of coating.

Dinner table wooden on balusters

Wooden table for a large family

An oversized table at which you can dine with a large family or arrange a feast by inviting friends should have robust design. Regular four legs are usually not enough to hold a heavy tabletop. Therefore, it is necessary to take additional measures to strengthen the frame.

Product design

IN this example consider how to make a large wooden table for the kitchen with your own hands measuring 2337x978 mm (naturally, slight deviations in one direction or another are allowed).

Drawing big table wooden

Before starting work, lumber should be prepared for:

supporting frame (38x90 mm);
countertops (38x140 mm);
support bars (19x64 mm).

You will also need the following tools:

a circular saw;
jigsaw;
drill;
screws (4x65 mm);
drills (3 mm);
furniture glue;
pencil, tape measure, sandpaper.

Manufacturing steps

To make the table reliable and attractive appearance, you need to responsibly approach each stage. So let's get started:

We make parts for the future wooden table from the purchased lumber with our own hands:

2 upper transverse beams (38x90x978 mm);
4 legs (38x90x695 mm);
2 bowstrings (38x90x921 mm);
1 longitudinal lower beam (38x90x1575 mm);
1 longitudinal upper beam(38x90x1473 mm);
2 braces (38x90x772 mm);
7 blanks for countertops (38x90x2337);
6 support bars (19x64x432 mm).

We carefully grind all the details, achieving an absolutely smooth surface without burrs.

Important! Grinding quality wooden surface depends on the correct grain size of the emery. For primary grinding, the grain size should not be larger than 200 µm.

We fasten the legs in pairs with each other using transverse beams (above) and a bowstring (below). We use two screws for each connection.

With the help of a longitudinal lower beam, we connect two bowstrings together.

Fastening of the lower transverse beam

We strengthen the structure with the help of the upper transverse beam.

Advice! In order for the beam to securely connect the two halves, in addition to screws, additional wooden dowels with a diameter of 10 mm should be used.

We cut the ends of the blanks for the braces at an angle of 45 degrees. After that, we attach both braces to the upper and lower transverse beams.

Fastening of the upper transverse beam

We connect the wooden boards intended for the countertop with cross beams from the inside of the structure.

Additionally, we strengthen the countertop with the help of supporting strips. Make sure that they do not go beyond the dimensions of the table.

Strengthening the structure with support bars

If desired, semicircular corners can be made in the kitchen wooden table, which will give the product a more elegant look.

Such option is suitable as for large kitchen or dining room, and for giving

Folding wooden table for a small kitchen

If there is not enough space in the kitchen to accommodate a large or medium-sized table, then you should look for a more original approach. One of these solutions is a folding table that is attached to the wall and is very easy to remove, freeing up the space occupied by itself.

Materials and tools

To make a folding wooden table for the kitchen with your own hands, you will need the following:

furniture board 30 mm thick;
wooden beam 20x60 mm;
loops (6 pcs.);
corner lamella (2 pcs.);
wooden dowels;
dowel;
screws;
drill;
jigsaw;
grinder or sandpaper;
glue;

Assembly: step by step

Advice! Before starting work, decide on the place where the table will be installed. Since the design is attached to the wall, it is very important to take into account all the features of the future interior of the kitchen, so that later you do not have to rearrange, leaving unsightly holes from the dowels in a conspicuous place.

Do-it-yourself kitchen table assembly steps:

We prepare parts for folding legs. To do this, we cut the wooden beam into 8 parts: 4 with a length of 720 mm, 4 with a length of 320 mm. We sand each element, removing burrs.

Assemble two rectangular frames. The rails are interconnected by means of furniture dowels, under which it is first necessary to drill blind holes with a diameter of 8 mm.

We connect the finished frames with each other with loops. In addition, a narrow rail must be attached to one frame with the help of hinges, which will be attached to the wall.

We fix the frame to the wall with dowels, after which we install corner lamellas on the sides. It is important to arrange the slats in such a way that they do not interfere with the legs to fold.

Advice! Instead of corner slats, you can use any furniture corners of the appropriate size, matched to the color of the table.

Fastening the structure to the wall

From a wooden shield we cut out a tabletop measuring 900x600 mm. For a more effective look, the corners can be rounded. After that, all ends should be processed with a grinder.

From the countertop we “separate” a piece 250 mm long, which will be attached to wall construction. The two parts are connected to each other by means of loops.

We install the 250 mm part on the corner lamellas and connect the elements with screws.

The final stage of mounting a folding table in the kitchen with your own hands

You can ennoble the table at your discretion by applying stain, varnish or paint. But even in its original form, such a product looks very good.

Wooden folding table – original solution for a small kitchen

On the Internet, you can find a lot of options for how to make a wooden table with your own hands. We have reviewed three of the most simple solutions for standard, large and small kitchens, the production of which is quite economical and does not require specialized machines and extensive experience in working with wood. For making more complex structures We recommend that you seek professional help.

In conclusion, watch the video, which shows how from the old wooden planks you can make a pretty decent kitchen table.

Video: do-it-yourself wooden table

IN modern interior wooden furniture is often found - it adds coziness, such furniture is environmentally friendly and, with proper surface treatment, easy to clean.

The table itself is an extremely functional invention, in demand in the kitchen, in the workshop, and in the office.

A wooden table combines functionalism, environmental friendliness and aesthetics. Such an interior item can be made by hand.

If you intend to assemble the table yourself, the first thing you should pay attention to is the material of manufacture. Very rarely, a whole cut of a tree is used as an improvised material, much more often - wooden boards. Advantages of this material: they can be sawn the right size on any building base; it is also easy to take them to the place of assembly if you have a personal car.

Of the minuses you can name only the possible difficulties that may arise during installation, and also what you should pay attention to correct handling material - otherwise the boards may disperse and will not last long.

Sexual

This material is used for floor coverings, for sheathing buildings and premises, and, according to the topic of this article, for the manufacture of interior items. Advantages such material are as follows:

most floorboards have a groove, as this is how they are fastened together.
This allows you to fasten the boards into the tabletop without any problems, while the joints will be the same and look aesthetically beautiful;
most of edged boards has already been processed, so after assembling the table, you can not resort to additional painting or varnishing of the product;
even if the floorboard is an ordinary edged one, it still fits with other boards better than the rest.

But the floorboard has flaws. For example, for a varnished board, the buyer can give a large amount than for an ordinary one with subsequent self-coating. Batten has a limited size, that is, its size will dictate the size of the countertop, or you will have to adjust the length yourself.

Important. It is impossible to make legs from a floorboard, only a countertop. This means that you will have to select a different material for the legs.

unedged

This board has jagged edges with bark, as it is made by a longitudinal section of a tree trunk. Such boards are cheaper, with their help you can achieve the original design solutions. But at the same time, they require additional processing, and it is rather difficult to join them.

oak

They are distinguished by unique strength, density and resistance to many biological and physical influences. Very Expensive, but in terms of service life, this material fully pays off.

Drawing

The drawing is necessary, because thanks to it the table will fit exactly into the room. Also, the drawing will allow you to calculate the amount of material needed. But first things first. What problems will the drawing solve?

Dimensions. If this is a kitchen table, and the kitchen custom sizes, and the table, respectively, will differ from the standards.
Model. Despite the fact that, in general, a table is four legs and a tabletop, there are a huge number of options for how to make it. There are a lot of table models, types of tabletops and legs.
Consumable calculation. Having basic mathematical skills from the finished drawing, you can calculate the amount of material needed. So that after buying the board it does not turn out that there are a lot of scraps left, or that there was not enough material.

Advice. Can be downloaded finished drawing from the Internet and modify it to fit your needs.

Tools

To perform the work, you may need the following tools, which should be prepared in advance:

hammer;
chisel;
hacksaw;
drill;
plane;
nail puller;
saw.

Advice. If further work with the tool is not planned, then you can not buy it, but rent it.

How to do?

After the material is selected, the drawing is prepared and everything necessary tools, you can start to assembly. When drawing up the drawing of the table, all its constituent elements, as well as fasteners, were highlighted. First of all, all the necessary elements are cut and turned in accordance with the dimensions indicated in the drawings. Then, after verification and measurement after manufacturing, you can proceed to the assembly of parts.

Important. Tools can cause damage. Observe safety precautions.

Assembly order quite simple, you can highlight the general steps, regardless of which model of the table you plan to assemble. The build steps are as follows:

1. Assembly of legs. The legs of the table, cut according to the drawing, are fastened with beams using self-tapping screws or nails. For greater reliability, the attachment points should be treated with glue, only then pulled off with self-tapping screws.

2. Attached to the leg structure countertop. To do this, planks are marked on the tabletop that fasten the legs, then with the help of self-tapping screws, nails, screws or fasteners, the tabletop is attached to the structure of the legs.

3. Installation horizontal screed. Many table models require a tie between the legs of the table so that they do not move apart.

Finishing

After the product is assembled, it must be processed. Processing is necessary so that the product is resistant to the effects of the external environment and lasts many times longer than without processing.

Product processing means its grinding and subsequent varnishing. Most often, grinding and varnishing are performed several times for greater reliability.

Photo

We offer to admire the possible results of the work:

Useful video

All manufacturing steps can be viewed on the following video

Conclusion

A handmade table made of wooden boards is a wonderful interior element that pleases the eye and provides comfort in the house.

In contact with

In the conditions of modern small apartments it is quite difficult to give free rein to imagination and purchase pieces of furniture that would suit everything. Among other things, it is quite difficult to find such interior elements that would be attractive not only in design, but also in price. These two problems can be solved by self-manufacturing wooden furniture. It could be, for example, a table. You can complete it by preparing everything necessary materials and tools. You can use this piece of furniture both in the kitchen and in the living room.

Preparatory work

In order to make a wooden table with your own hands, you will need to prepare some materials. You will need a furniture shield, the thickness of which is 19 millimeters. This material is highly durable and looks very attractive. Shields on preparatory stage it will be necessary to mark, and then cut blanks out of them. It is important to stock up on the necessary fasteners for assembly. Thus, it will be necessary to prepare 6 boards that will make up the lower support. Their size is 19 x 100 x 965 millimeters. There will be 4 legs, their dimensions are 19 x 215 x 680 mm. The molding of the legs will also come in handy in the same amount, however, the dimensions of these elements should be equal to 1938 x 470 mm. The tabletop supports will be blanks with dimensions of 19 x 125 x 610 mm. A wooden table for a gazebo with your own hands can be made according to the same dimensions. The master must prepare two dowels for legs with dimensions of 10 x 32 mm. Two jumpers with dimensions of 19 x 140 x 1100 mm should also be distinguished.

Additional elements

You will need a steel coupler in the amount of two pieces, its size should be equal to 150 mm. The table top will be limited to the following dimensions - 19 x 1020 x 1900 mm. The worktop plank must be cut in two pieces and have dimensions of 19 x 19 x 1750 mm. Screws, washers, ties, and dowels will be used as fasteners.

Instrument preparation

It will be impossible to make a wooden table with your own hands if you do not stock up electric jigsaw, circular saw, hacksaw, drill with drills, planer, milling machine, file, clamps, brush. To fasten the parts, you will need carpentry glue; you can process the wood with sandpaper. The table will look good if it is treated with polyurethane varnish, which can be glossy or matte.

Manufacturing technology

If you decide to make a wooden table with your own hands, then you need to know that each support structure has 3 blanks glued together. An opening should be formed in the central part. Immediately you need to cut out 6 elements for two supports. Next, the master must make straight cuts using a circular saw for this. The corners must be rounded. In two blanks, it is necessary to cut the central part so that the groove falls on the central part of the support. The width of the groove should be slightly less than the thickness of the spike in the leg. This will prevent loosening of the structure during swelling and drying.

The next step is to glue the supports. After applying glue to the surface of the parts, they must be folded so that the upper edges are flush. Reliability of fastening will provide clamps. After the supports are dried, it is necessary to get rid of excess glue. After the clamps are removed, you need to plan the lower and upper edges.

Work on the legs

When a wooden table is made with your own hands, you need to prepare four legs. After the vertical edges, it is necessary to plan and round them with a milling machine. At the ends of long blanks, it is necessary to mark and then cut the spikes, placing them from above and below. This can be done with a circular saw, which must be equipped with a combination disc. After the moldings are cut out and brought to the required dimensions, all 4 ribs can be rounded. On the reverse surface of the moldings, it is necessary to make grooves for glue.

Work on supports

If you decide to make a wooden table with your own hands, a design photo will help you decide what features this piece of furniture will have.

The next step will be cutting blanks for supports. For gluing, a 10 mm groove should be selected in each blank. It is preferable to perform these manipulations immediately. In order to simplify the task, it is necessary to prepare a cardboard template by marking the location of the grooves on it. Further, pairwise gluing can be carried out so that the cut is located in the central part. Everything must be tightened with clamps. Once the glue has dried, you need to clean the saw cuts with an emery cloth.

Leg mounting

If a wooden table is made with your own hands, the photos must first be reviewed by you. It is important to initially fit all connections without using glue. From the wide edges of the connection should be tight. On the side, it is necessary to provide a gap of 1.5 millimeters to compensate for changes in the size of the wood. When edging, these elements will be decorated.

The walls and spikes must be treated with glue, after which you can proceed to pair the legs with vertical supports. Without waiting for the glue to dry, it is necessary to make holes and strengthen the pairing with dowels. If you decide that you will make a wooden table with your own hands, it is recommended to prepare the drawings for initial stage. For the legs, moldings of the required length should be cut. They need to be glued and pulled together with clamps. The glue is applied, and then left until dry.

If you decide to make a wooden table with your own hands, the drawings can be borrowed from the article. The jumper should be installed high, so that those sitting at the table do not touch it with their feet. It is necessary to glue using two strips, which are preliminarily edged with a molding.

After the glue dries, you need to remove the clamps, and then chamfer. Holes must be made on the short sides for installing fasteners. The tabletop can be made independently, its dimensions may differ from those presented above. At the ends, you need to select the spikes using a jigsaw.

Next, the saw cuts are cleaned with a file. Along the long edges of the workpiece, it is necessary to install strips that are attracted by clamps and dried. By using edge cutter you need to align the edges of the moldings. They should be fixed to the planks, and then dry and clean the joints with a grinder.

When a wooden table is made for a summer cottage with your own hands, the drawings will make it possible to understand how the table top and legs are connected. To do this, use the brackets U-type. On the long sides of the base, quarters should be chosen to fix the sidewalls. The ends of the last elements must be rounded and cleaned. After that, everything is glued and compressed with clamps, and then left until the moment of drying.

Final works

Before you make a wooden table with your own hands, you need to familiarize yourself with the technology of work. At the next stage, with a deviation from the edges of the base by 100 millimeters, it is necessary to make holes, the diameter of which should be equal to 20 millimeters. A through groove should be placed between them. Holes are required so that the base does not split. If you will be making a wooden table for giving with your own hands, the drawings should help in carrying out the work.

Now the master can assemble the table, for this it is necessary to fix the jumper to the legs. Using a pencil, you need to mark the position of the legs so that they are perpendicular to the ends of the lid. Brackets should be installed according to the markup. In the countertop, you need to make 10 holes for installing screws. Next, you can strengthen the brackets. A washer must be placed under each screw, this will compensate for shrinkage, this is the only way to make a folding wooden table with your own hands.

You can change the technology and dimensions of the table at your own discretion. However, it must be remembered that the design should be as strong and reliable as possible. It is important to protect wooden elements from negative impact the external environment, especially for those pieces of furniture that are supposed to be used in the kitchen or outdoors.

Table for suburban area- not just a piece of furniture, it is a ritual place where all household members invariably gather. In the summer, no one expresses a desire to go into the house to drink tea or have lunch. On fresh air and the appetite is better, and the food is tastier. In order not to carry furniture from home for gatherings, you can make an outdoor table for giving with your own hands, at the same time taking care of the benches.

garden table with built-in bench

The country table does not imply the complexity of the design, so there will be no problems with its assembly, even far from carpentry and creative works personalities. We will present you some very simple and at the same time original ideas its creation, perhaps some of the proposed by us, will decorate your site.

Material for country table

Do-it-yourself table for giving: interesting ideas

Conclusion

Photo gallery - do-it-yourself table for giving:

the table for giving should be durable

Outdoor furniture is subjected to serious tests, so it must be made from durable materials. Specifically for the table, you can take:

Stone.
Tree.
Metal.
Handy materials.

The tables from the latter look especially interesting. But first things first.

Wooden table

outdoor dining set

When choosing a material, pay special attention to the type of wood. Board board - strife and use, in our case, not all are suitable. Flexible and easy to work conifers unfortunately they won't fit. In addition to the fact that they need special impregnation, because they are too flammable, the resin they release will also spoil the tablecloth and dishes.

The necessary elements must be sought among hardwood blanks. On the countertop it is necessary to collect boards with a thickness of 30-50 mm. For greater strength, they are stuffed on the frame. The legs of the structure can be saddled straight or X-shaped. It is important to process all the details well so that there is no danger of driving a splinter while wiping the table. Mandatory processing of the finished product with protective impregnations.

folding wooden table in the country with their own hands

In order to make a table “for centuries”, varnish it, and do it, as they say, without sparing the brush. The composition must be literally rubbed into the wood, and this will be possible only if you slightly heat it in a water bath. Lacquer coating is made in three layers.

stone table

a round table and benches made of stone will last for decades

You want to do monolithic structure that strikes the imagination and creates a special mood for meals - try working with a stone. You can create a table of this type for a summer residence with your own hands or buy a finished product. Shops offer granite and marble options in a wide range. There you can also pick up benches made of the same material as a set for them.

to inspire life in old table, it is enough to tile the countertop with tiles

It will not be cheap, but if you really want to have such a luxury in the garden as a stone table, try to reduce the price of it. Lay out the bases of the benches and the table yourself. For this, it will fit perfectly:

Flagstone.
Brick.
modern blocks.
Regular cobblestone.

stone stump table

These materials will be much easier to fit into general concept garden and combine them in existing buildings. On the tabletop, seats and backs it is quite possible to take fake diamond. The view from this, the composition will not lose.

metal tables

Those who are "friends" with iron and have at hand welding machine, may be interested in the option of metal furniture. Products are elegant and aesthetic, with openwork decor inserts. metal table also need to be protected from early destruction. This is done by priming the metal before the final painting.

round garden table with stone top and shaped metal legs

Forged tables will satisfy the needs of respectable owners, but it is unrealistic to make them with your own hands. Similar designs are ordered by professionals. Forging requires the conditions of a forge. However, given that products of this type can be wonderfully combined with wood, stone, glass, you can only purchase a forged base for the table and complete it with a table top yourself.

Do-it-yourself table for giving: interesting ideas

stylization of a table and chairs under a mushroom meadow will create some zest in landscape design suburban area

If you are determined to work on creating a country table yourself and are ready to make it non-standard, look at the “unnecessary” things in each shed. Perhaps among them there are items that can become consumables for creativity.

Mixed assortment

Not less than practical option country table, along with wooden, metal, rattan, stone products, is a team of all sorts of "hodgepodge". This creation will become a multicolored "character" of your garden and will never go unnoticed. What to make it from? You will not believe! Your starting materials will be:

Broken flower stand.
Metal barrel lid.
Colored plastic scraps or round glass.

a set of timber

Take a sheet of paper and try to draw on it a circular ornament in the spirit of the Moroccan style. Enlarge the creation to the required size. A photocopier will help you do this quickly.

We put the resulting blank under the glass and draw lines with a copper contour. Let it dry for a day or less. The recommended drying time is indicated by the manufacturer.

it is enough to decorate the side parts of the bench and chairs with wheels to get the original garden furniture for giving

Now it's the turn of the marked glass painting stained glass paints. The main thing here is that the colors are evenly located inside the area allotted to them. If you have never worked with specific paints, it makes sense to practice on a separate piece of glass in order to understand how much you need to take for high-quality coloring of fragments. The completed painting must also be thoroughly dried.

Finished glass can be additionally decorated with elements drawn with a copper outline.

Cover the barrel lid with white paint, which will hide traces of rust, and proceed to the preparation of the main part of the countertop.

table for giving from a vazyanka of firewood

The metal part of the flower stand, which will serve as a supportdo-it-yourself table for a summer residencemust be primed, painted acrylic paint in copper color and partially patinated.

After the footboard is ready, glue the points of contact with the glass with a window seal. This is necessary for its best fastening.

Now the final stage. Putting all the pieces together: put glass top into the lid and put the composition on the stand.

It may not be very comfortable to dine at such a table, but it will be very pleasant to drink coffee in the evening cool.

decorating an ordinary stump with a mosaic, you can get an original table

pallet models

After construction country house you probably still have at least a few pallets on which packed bricks were brought or building mixtures. You do not even suspect what kind of magic wand it is for finishing the dacha. With their help, the table will be ready in a few hours, and it will have such a look that it will not be a shame to put it not only in the garden, but also in home interior. At the same time, note that you will not even incur special financial costs.

pallet garden table

A do-it-yourself table made from pallets can be designed in several ways. For example, for the most simple option you will need:

Screwdriver.
Brushes.
Sandpaper.
Swivel wheels.
Colored antiseptic stain.
Screws.

mobile table for giving from pallets

The first step is to sand the pallet. At the first stage of removing the rough layer, use coarse-grained sandpaper, fine-grained sandpaper will be required for final processing. If there is a grinder in use, which is equipped with grinding wheel, use it instead of sandpaper rolls. This will speed up the preparation process.

master class for making a table for a summer house with your own hands

Turn the pallet over and attach small swivel wheels to the bottom. This is done with ordinary screws. For greater reliability of fastening, place under the last washers that can be removed from similar screws used for working with metal tiles. Don't disregard this advice. The bases of the wheels have large enough holes, and a screw without a lining will not be able to fix the part to a wooden surface with high quality.

step by step table making process

Now it remains to open the finished product with a wax-containing antiseptic. If you want to highlight the structure of the tree, use a transparent composition. To give color, stain is required. You can style the table:

under oak;
larch;
rosewood;
nut;
pine.

A low wide table would be appropriate on the veranda, in the attic room, the interior of the bath.

without additional processing, the table will last at least two seasons

If you want to make the summer recreation area more comfortable, make not just a table from pallets, but a whole set country furniture, supplementing it with permanently fixed benches. Such a kit can be made portable and, if necessary, moved from the barbecue, say, to the pool or to the pergola.

bright pallet table for the whole family

A creative option for a country environment would be a pallet, transformed into a countertop and equipped with vintage legs left over from an old dresser, table, cabinet. This detail needs to be highlighted in a contrasting color.

You can use such furniture in the bedroom, gazebo, on the terrace.

Reel table

vertical planks allow you to place various items

“The coil is heavy in itself, but it is easy to construct a lightweight version from it. table for giving and again, do it yourself »

A cable spool is also an excellent material for creating cottage design. Look at it - it's almost a finished table! A little decor and it's ready to use. The easiest way to decorate the coil is with twisted twine. To do this, simply wrap it tightly around its trunk. The upper disk of the structure is ground and varnished. If you want to add functionality to the product, install vertical rails around the circumference. They can also be decorated with a rope. With the advent of the crossbars, you can store the necessary items under the table.

reel table with umbrella mount

The coil is heavy in itself, but it is easy to construct a lightweight version of the table for giving and, again, do it yourself. You will only need the top disc from the product, which will act as a countertop. The frame frame for its installation can be made of metal.

If in shady garden there is a stump of a suitable height and strength, then it can also be converted into an impromptu table with the help of a reel disk. This idea will be good not only for the playground, it is also rational to use it when organizing a relaxation corner for adults. Having cut a wooden disk in half, it will be possible to assemble original chairs, which can also be put on stump legs. Get a good garden set.

the reel table can be decorated with any pattern

Wood table?

Why not? Such a brutal option can become a decoration for a barbecue area and even a living room. Work is nothing. We find an old thick log, impregnate it with stain and level it lower part giving the product stability.

stump table on wheels

No less easy to manufacture and attractive in design mobile table from hemp. By the way, its functionality can be expanded if you are not too lazy to sew a foam seat on it, which will allow you to easily transform the design into a comfortable pouf.

Not in short supply in the country and chopped firewood. Of these, it is also not a problem to quickly build a comfortable table design for a summer cottage with your own hands. Gather flat base and fasten the split bars into the countertop with a belt tie. Put it all on its feet and enjoy communication with primitive nature in full.

table for a living room cottage from an old log

Tire garden composition

Do not rush to get rid of old tires. They can make a magnificent landscape decor with extended functionality: use the table not just as a table, but the pouf next to it not only as a pouf, but arrange a place for garden tools inside them, for example.

the table and chairs are made in the same design style from old tires

Paint the tires in a color acceptable to you, dry, fold in a column, fastening the elements silicone sealant or other suitable compound.

Now take care of the countertop and seat. The first one is nice to make from durable plastic or cut them out of wood. For a pouffe, also saw out a plywood disc of a slightly smaller diameter than that of tires, glue foam rubber to it and cover it with a cloth. Removable parts are ready.

Distillation table

movable table made of old boiled wood with a wooden top

Did you find grandmother's brew in the bins? Fabulous! We transform it into a mobile storage table. We equip the bottom with wheels, and for the upper part we assemble a countertop from the boards. Having cut the boards to size, we collect them together on cross bars, the length of which must correspond to the diameter of the boiling. This will help the countertop to stay firmly in place, and not move out of the way and not turn over at the slightest load. There will be enough space inside the impromptu table to organize a mini-bar.

In the same way, it can be converted to useful items empty boxes, barrels, etc.

original table with large metal wheels instead of legs and built-in benches

Conclusion

As you can see, assembling a table for a summer residence with your own hands is a very exciting and absolutely not labor-intensive activity. Here, even beginners do not have to be afraid to spoil something, because, initially unsuitable for direct use, objects and elements are used. Try your hand at an unusual business for you. Perhaps the final results will be an incentive not to stop there, but to go further. From the materials presented, you can make many more unusual and necessary things in the country everyday life!