Flowers on the father's hand. Puffy do it yourself from old things: step-by-step instructions for those who want to save. Step-by-step manufaction of the manufacture of plastic bottles

Press the class

Tell VK

It often happens that in the hallway you want to sit when cleaning the shoes or in the process of arms. But what if you don't want to spend money? The answer to the surface is to make the otfik in the hallway with your own hands. Especially when all materials are at hand. Master and tires and knitted yarn are used, and today we can make furniture for the hallway from plastic bottles. I think it is much eco-friendly and easier than using a bus.

Standard furniture in the hallway does not always imply a seat for seating. And how it is dreaming about him after the far road or long walking on heels. I think that women will understand me, and men are also heard about the difficulty of driving on heels. And here I propose to finally equip a place of rest, even if a minute, making it outline.

What is interesting to this furniture can carry and a functional role, if you make a folding lid and a box inside. As the material can be used and Phaneur, but without male hands it is not enough here. Therefore, today we will make a soft, lightweight and very beautiful puff from bottles.

Step-by-step instructions, how to make the emblem with your own plastic bottles

Plastic bottles - things available absolutely to everyone. But the overwhelming majority emit them, and well, if in the garbage tanks (for what we urge everyone).
But there were people with irrepressible fantasy, which from this material and beds and sofas and even make houses. Moreover, it turns out a very robust design. We have not yet grown to the level of masters, and how all beginners, consider the entire process of step by step and in the most detailed as possible.

So, the pouf can be made square, round and oval forms. I think that the square of the questions will not arise, so we choose to explore round shape.

Materials:

14 plastic bottles (can more)
Double sided tape
Ordinary scotch
Needle and very durable thread
Foam or Sintepon
Cardboard or plywood
Tissue case

To increase the strength of the pouf and not to give the bottle to bend, it is necessary to perform one technological rule.

At night, we put them on the cold, unscrewing the covers, and in the morning we twist the covers until the bottles were heated and put it under the battery.

When heated, the cold air expanded, which makes the bottles much stronger. If, on the street, hot summer, then you can put bottles in the freezer. And after fifteen minutes, also close it with a lid.

There are several options, how to connect bottles:

Covers up
Alternate one bottle bottom up, another down. It is more convenient to shook the seat.
Do barrels: a prepared bottle insert into part of another. How do this part do? Just cut off the neck. It turns out that the details of the bottom of two sides.

Today we use the first method. Before starting work, let's drink and the dried working material, lay stickers and rustling labels. After that, it is possible in the freezer or to send the balcony.

We begin to connect the scotch for two, three and four bottles. Watch them to be at one height.

We glue the whole blank by giving it a circle shape.

Now we start doing the bottom and the seat. For this purpose, you can use Fane or dense (double) cardboard.

We supply the bottom of the pouf and on this pattern we make two ovals from plywood: top and bottom. We glue them to bottles with bilateral tape.

Or self-drawing to the lids, as in the photo.

To the pouf was a very presentable view, we will make it smooth and soft walls, they will also support proper form Case.

Now we take foam or syntheps and cut off a rectangle with such dimensions: the length is equal to the length of the base circumference, and the width of the height of the bottles.

And we sew it on the billet very durable threads.

Now we make a soft seat, for this you need to take a piece of thick foam, we supply and cover as a pouf lid, then sew the foam rubber among themselves.

Introduced the stage of decor. To do this, we need a cover, I prefer from the fabric, but you can experiment and weave it from the vine, newspaper tubes, use patchwork equipment or cover the skin.

Draw the pattern by the same size by adding the allowance. From the bottom you can flash the rope to tighten the case or zipper. In any case, when dirty, you can always remove it and wash.

Pufa, made according to this technology, will endure weight up to 70 kg. The more bottles and wider pouf, larger weight It will endure.
I also note that for this product it is better to take bottles from one and a half liters if they are smaller, the emblem will turn out to be too low and uncomfortable for seating.

Ideas of homemade puffs

Of course, it can be used and not only in the hallway, but also in the living room, bedroom, and especially in the nursery. For this, it is important to simply choose the size and decor. For the child, the options are bright, with jewelry from pomponov, bows.

For the living room you can use laconic square puffs, covered with velvet or ecocuse.

You can connect several fabric options as in the photo.

Using contrasting colors, always get stylish solution. Case can be made of an old knitted sweater.

How to make the father-in-law do it yourself, without throwing money to the wind? Of course, it is possible to buy it in furniture storebut looking at the cost simple product From the chipboard, there is a desire to make crafts at home. If we consider furniture headsets in general, then their large part refers to rather complex designs.

Do something out of this list with your own hands experimental mastersAnd only the ottoman is done without special skills and knowledge from the remedies. The practical thing will turn out when will be chosen upholstery fabric Durable and high-quality, which can be wiped, clean, washed.

Such materials include leather or furniture fabric sold in specialized stores. It remains only to view phased instructions For the manufacture of dumping various shapes.

So:

Puffy for the seating of several people in height comparable to the chair and more resembles a soft bench. For home, such a model is inconvenient, and not needed, but in the zones of fitting and expectations is very relevant.
Puffy in addition to something with a certain height. From the very definition it becomes clear that it does not perform an independent product, but serves as an application. Models, barely towering above the floor, are not intended for the seats on them, but are used as stands for adults. Children love such things in miniature and with pleasure use them in their games.
Complement chair, sofas, beds, rushing under the table Or being a component in a non-standard combination (beach cabin with puff), the otfiki firmly occupy a niche in furniture salons. You can say more, a fashion appeared on the author's items that make the interior fashionable, complementing it.
The video in this article represents puffs with advanced features. Looking through it, remember the plot of the film, when the pants turn into shorts in a slight movement of the hand, "and here the ottoman is transformed into a full-fledged chair with a table, a bed with a lamp stand and in other necessary items, while taking a minimum of space.

Before taking on to make the manufacture of Purifies with your own hands, it is necessary to have an idea about it, it would seem that a simple furniture family.

So, the puffs are classified by materials, structures, functions and forms:

Textiles, leather are used on soft products.. It's nice to throw my legs on your own hands, and when it makes it possible to fall apart on it.
The rigid structures of the emblems make from Rattan, wood, often covered with varnish, cortex of cork trees. Hard deputies, with their own hands made, are not suitable for long-term seating, but brought into the interior the stress, intrigue.

ATTENTION: The emblems definitely refers to the desired thing, and its need is felt at the entrance to the house, more precisely, in the hallway.

How to make, sew, associate and which design of the PUPPIC to choose, - the task is not from the lungs. Puffy can be with naked frames from steel tubes or wood.
Purph may have closed frame And the legs are hidden under the frills of the decorative skirt. Such products are popular with the British and Americans.
Fund on barely noticeable legsWhen the chair is copied without armrests and backs.
Puffy with your own hands - Not only a comfortable chair for members of the whole family, regardless of body weight, but also a wonderful support with a sore back.
What could be easier inflatableconsisting of a textile cover on a zipper and an inflatable chamber inside it? The deputies differ not only by materials, designs, but also forms.
Square Puff Your Hands, Round, Triangular, Combined From different geometric shapes, you can make from the remedies.

Screw agents in the house

How to make the ottoman yourself, if there are no skills and desire to drink, cut, spin? Clemators offer a lot of ideas and proposals embodied. Working on the manufacture of a pretty Purphination is not complicated, but quite fascinating, but the thing made with your own hands is radiating special warmth And has a aura of home comfort.

Soft baffies

SAMI simple schemeHow to make a soft aspic with your own hands, is as follows:

Two circles with a diameter of the upper and lower parts of the product are cut from the tissue.

Tip: Cutting details, you should not forget to leave on the seams of the allowance.

Two rectangular details of the same size are cut:

width in the height of the puff;
the length equal to half the length of the vertex and roofing nose.

Stitched together on one side of the width of rectangular parts to obtain a long tape.
It takes one of the circles and compared the seam.
The same is done with the second round.

Tip: If the seam is not too smooth or neat, it is trimmed with a decorative border.

The resulting puff cover is stuffed with any suitable material.
Lightning is sewn into the non-refined edges remaining in a rectangular tape.

The photo shows the scheme of the manufacture of a puff in the simplest way.

In a similar way, you can make a ottoman having a cube shape. The difference in the manufacture of parts that must have a square shape, and for the manufacture of the sides will be required from the tissue to perform four parts, and not two.

Then:

Details are compared with each other.
For a clearer designation of the edges of the cube, you can use the canvas of another contrasting color.
Additional strength, elasticity will give more dense tissue.
A packing of such a pouf can be performed by syntheps and foam rubber. These materials perfectly hold the form and are not deformed.
A hole for stuffing the material is made from the bottom of the puff so that it is not visible.
If you wish, it can be shot down tightly after packing a puff, or insert a zipper, to possibly replace the material if necessary.

Sewing Purphic

The video in this article demonstrates the order of tailoring of the Purphic of 8 elements. For this, the sheet of paper is folded in four, it is drawn on it and the template is cut on the scheme below.

The template in the deployed form is fixed on the fabric and the cutting of the blanks in the amount of 8 pieces begins.

ATTENTION: On the pattern it is not necessary to acquire a new fabric, you can use old deposits of knitwear, old sweaters.

The photo below shows that the sharp end of each hexagon bent into approximately 5-6 cm and stitched on a typewriter, which allows you to get an octagonal hole for packing a finished product after assembling all items.

The billets are in pairs to each other with an indentation from the edge of about 1 cm. The pairs are folded by the front side so that the seams are from the wrong side, in the stitched form there are 4 segments of 2 billets.
Similarly, they are stitched in 2 sections and obtain 2 halves of the future of the Pupination.
The halves are connected on the machine between themselves, the case turns on the front side.
The emblem is stuffed with a prepared filler (hollofiber, foam, syntro), and the hole is closed with a cap of the corresponding size. The edges of the lid should be processed, and it is manually, gently sewn from above the padded hole.
Instructions for beginners recommends to sew the emblem literally three seams. For which 2 circles are cut, the diameter of which is about 50 cm or 2 squares if the clear lines like more. Geometric figures Will be the top or bottom of the future product.
From the same material or from another, a strip of size corresponding to the length of the circle or the perimeter of the square is cut, the bandwidth depends on the height of the POPI. The height of the PUPPIC, in turn, is selected depending on the function that will be performed by the product, whether it is a stand under the legs, the seat in the hallway, toy for young children or design in the living room.

ATTENTION: Cutting stripes for the sidewall of POPIC is made taking into account points on the seams.

The work is done in such a way that the seams are from the wrong side, the string is sewn primarily to the bottom of the product and only then to the top.
After the drainage of all seams, the Pufik turns on the front side and stuffed.
According to the same patterns, which are presented at the top, for the first option and for the second, there are covers for a lightning. This will allow in the future to wash the case or clean it without any problems and costs in time, and do not solve the task how to enjoy the cafe with cloth if it is already made of fabric.

Reliable base of plastic bottles

Plastic bottles are available in every home in an unlimited quantity. Take at least bottles of beer and water with a capacity of 1.5 - 2 liters, their color in the finished product does not matter, but to unload the ruins in the yard and the house they will help well.

For the manufacture of good, stable PUPPI will take no less than 16 bottles with a capacity of 1.5 liters or 9 pieces of 2 liter.
Packing packaging cardboard from household appliances Also waiting for your turn and is not thrown over for years, but suddenly a refrigerator break, how to carry it into repair? The video in this article will show how the cardboard is used in the manufacture of plastic bottles.

It is necessary to stock tape, foam rubber and upholstered material.

Pistol with hot glue, lightning for a cover.

Attention: out round bottles You can make an even larger circle, square or rectangle, that is, the form of the product is selected from its preferences.

For convenience in the work, if a very big empty is planned, the bottles are connected in separate sectors and the sections of the scotch, and then the formation of a common structure begins.

If the future product is planned for a round form, then the pen is needed, starting from the middle.
For this, the bottle is taken and, the movements along the radius, new items are attached to it, which are carefully fixed by scotching to each other.
After completing the circle, the base of dense cardboard is cut. It must be in size a slightly more design of bottles.

Cardboard mount is also performed by adhesive tape into several layers. Once again stop at that moment that the grounds should be harvested 2, there is no need, and everything is clear.
It was a turn of a soft upholstery, for which two parts for tops and bottoms are cut out of the dense cloth of the foam rubber, which are stuck at the place.
From the remaining portion of the foam rubber, the rectangle is cut around the size of the circle line, which turns around the puff.
The final stage of sewing the cover from furniture fabric remained, preferably on zipper. This operation will allow not only easy to remove the wash case, but also to make several options and from time to time to update appearance of its product.

Baby Raritet Puff

How to make an otfik from stool so that Babushkin Rarith served not yet one year?

Indeed, the stool is solid at one time durable treePainted oil paint, maybe many years to please the owners, but the appearance does not match modern setting. Bring to equilibrium interior will help alteration old stool In a stylish otfik.

Pre-design stool is strengthened with self-draws.
The legs are slightly shortened - do not forget to control the level so that the emblems will not be saturated.
The framework of the future of the Purification is collected, for which 4 sheets of plywood are used. They are attached with self-drawing to the legs of the tobabere.
The fifth sheet of plywood is screwed down and serves as a bottom of the future craft.
The seat foam rubber is cut in 5 cm.

ATTENTION: the upper part of the PUPPIC is missing with glue, then the foam will not be shot down with time in an untidy com.

The upholstery fabric on the seat is attached along with the foam rubber using a staple bracket.
The foam rubber from the sides can be attached by rails that help to give a round shape of the aspiration and make it more beautiful.
The cloth is drawn up by the remaining part of the design, fixed with brackets.
The wheels are screwed or, as in the photo, the top, from under the flirty upholstery, looks pretty legs of an updated stool.
The challenge how to make a stool ottik, solved in a short time.

For lovers knocked

A rich Russian is a lot of associations and questions. How to knock, where to knock when knocking? For those who love to knock down the hammer on the nail offered the father's hand to do with the boards and chipboard.

Rectangular pieces of 40x30 cm from chipboard are pre-prepared from the amount of 4 pieces.
Circle diameter 30 cm and wooden shells 4 pieces.
Glue for wood.
Furniture wheels with special fasteners.
Metal corners, screws.
Porolon and upholstery fabric.

How can you notice a set necessary materials It is not very different from each other when they make the emblems with their own hands, even in different ways:

From the rectangles the box is going. Go to go metal corners, self-tapping screws, align all corners of the design, they must be straight.
At the bottom of the glue, the bars are fixed, on which the wheels will be in the future.
The base is attached from above on an individually selected form.
The finished frame is rich in the same type of technology using foam rubber, fabric and zipper on a case.

For lovers knit and fill

How to make your hands the emblem frameless and so soft. Handwriters owning a crochet will be able to link a soft emeth much faster, but they can not like their appearance.

Lovers work with the knitting needles represent the interesting models of the deputies related to them:

For work, you will need the most thick knitting needles, which are in stores.
For spokes with a diameter of 9 mm, rather thick wool is suitable.
Ordinary threads offered in stores are too thin. The price of them is not high, but due to the fact that they will have to make thicker, gossiped them among themselves, will have to acquire a sufficiently large amount that will add product costs.
Of course, you can cut, dissolve, twist unnecessary knitwear, which takes a lot of time, and find home the right amount of one-day knitted clothes that came into disrepair is quite problematic.
It seems that the solution to the problem as with your own hands to make the emblem went to a dead end, but fell on the eyes of cotton ropes.

Attention: Lowering synthetic ropes are not suitable for this work, and cotton ropes are problematic to buy in small cities.

For a soft punch, sufficient sizes will need 20-30 such ropes that are binding to a long rectangle.
Rope fastens side to get a spacious, wide skirt.
The rope of the same color is tightened by the bottom and it turns out a bag that needs to fill something. There are 2 options here - use the old bar, neatly folded on the shelves in the closet or go to the store and purchase a foam or holofiber.

From an unnecessary older, the emigeration is obtained heavy and not so round and lush, like from store materials, but the place is released in the closet for new clothes.
The top of the Purph is drawn up by the same rope and you can try your product.

Puffy from the old bucket

Here is one more interesting solutionFor which we need: Old plastic bucket, thick rope from jute, a gun with hot glue, steppeler, scissors, handle from a furniture locker, tape velcro, upholstery fabric and a few new rags from microfiber. Also need cardboard, but it will be better if you replace it on thin fan.

First of all, wash the bucket and remove the metal handle from it.

Next, with the help of hot glue, skid the outdoor surface of the bucket with a rope, ranging from the bottom.

The end of the rope doit and neatly hide.

Put a bucket bottom to the cardboard and circle it. According to the intended template, spread the upholstered cloth and cut round workpiece With the release of 5 centimeters.

We do in the center of cardboard and fabric hole. We produce a bolt from the furniture handle through them and screw the knobs.

Next, we turn the fiber into the tube and radially wind the bolt between the cardboard and paper, creating a kind of roll. To the fiber does not unwind, reliably fix it with glue.

The tissue is then stretched and fixed on the back of the stepler.

To hide traces of cardboard, close reverse side Sitting another piece of fabric to be placed on glue.

Cut the velcro to four equal segments and make their cross-crosswise on the bottom of the bucket and the base of the saddles - bristles to the bucket, and the fluffy part to the seat. Connect two details. Hooray! Puffy ready!

As a result, it turns out this useful palpFor which you can sit comfortably.

Various options provide the ability to solve the task, how to make the ottoman emptying itself, in the prosperity of available in any house. The only thing that I also wanted to focus on the floor indoors.

Laminate is quite sensitive to mechanical loads, so it is better to make the ottoman without wheels and legs, that is, with a solid bottom. On the soft coating, carpet, carpet is appropriate aster with rollers, but for tile coverage there are no restrictions, unless wrought-made legs can be an exception.

Padda Pad

In one toast, the hero of the "Caucasian captive" expressed the very essence of being so that "our desires coincided with our capabilities." There is a free time and the desire to make the emblems with your own hands from the chipboard, it is necessary to prepare opportunities.

Tools I. necessary materials Complete in advance.

Good doctrine do not do without a good bottom of the word chipboard. Optimal size The designs are within 400x400x500 mm.
It is possible to make a woodcutting a wooden technology by simplified technology, making a frame in the form of a mailbox from a bar and fasten the side by the side by the cutters, but since the punishment is done for yourself, then you can try.

Work with pleasure

With a bad mood for the work should not be taken: something falls on the leg or you will not get a hammer on the nail.

It is placed, cuts out of the chipboard of 5 squares 400x400 mm for the manufacture of wall structures and the bottom.

ATTENTION: The bottom of the PUPPIC should not be made from plywood, small children love to hide in secluded corners, can break the thin paneur and get injured.

The lid is performed by any geometric shape: Square, round, oval. Newbies may not experiment and dwell on the square lid. It will have dimensions a few more basic box 430x430 mm to protect it from bumps inside.
The height of the finished product is folded from the components of the elements - the height of the structure is 400 mm, plus the rollers 50 mm, the bottom and the tire with a thickness of 32 mm, the upholstery is laid in 50 mm, and 532 mm.
From the prepared elements begins the formation of a design.
Blood sidewalls are bonded with metal corners. Strengthen stiffness and reliability will help bars that are punctured all internal angles.
With the front side of the Purphin, the bars are screwed into the bars, the hats of which should be recessed into the tree so that they are not having problems with torn upholstery.
The bottom of the box around the perimeter is drained to the joinery glue, capturing the ends of the bars.
The bottom of the PRIFIC is fastened, and the cuts are again screwed into the ends of the BRUSEV. Collected design It should be good.
The basis of the PUPPIC is made, but there are no wheels and the lid, on which in the future you can sit.
The lid fixation is carried out by 4 bars screwed from the inside. The work is performed after there is a confidence that the lid closes freely and the bars of stiffness from the side do not interfere with the closure of the lid.
The finished design turns over, and wheels are attached by the cutters.

Attention: they are fixed through the bottom to the ends of the bars, for which small holes are drilled in the bottom.

Before continuing to work, it is necessary to make sure that the resulting design is sufficiently stable, well holds the sitting on it and there are no shortcomings that prevent further work, otherwise it makes no sense to start upholstery.

Puffy dress up

The baffy of the tree is your own hands, from the chipboard or generally soft needs clothes from above. This function is performed with an honor perfect, the upholstery fabric, neatly attached to the structure of the structure.

First, the PUPPI cover is drawn up, for which the soft lining of the foam rubber, synthetone, and batting is cut. The size of the lining must match the seats parameters to carefully, not hang, be glued to the place.
From the fabric intended for the upholstery, the blank is cut out large sizesthan lid. This is done so that the edges can be beatened under the cover and secure them from the inside the stapler or furniture cloves.
The instruction instructs further execute the sides of the Purphic.
Detail of upholstery fabric 400 mm x 4 \u003d 1600 mm with a reserve for a connection is cut. Also in height, the material must have a battery from above and below.

ATTENTION: The fabric needs to be fired, pull, turn inside, edges to fix with furniture cloves or stapler.

The seat design is performed, niche is rushing, all edges are neatly closed and you can make a finished product on the control of collective members of the family.
The baffic of plywood is performed with their own hands on the same scheme if an option of this simple design is selected.
The work is a little more complicated when the drawer is provided on the ottika, then the bars are replaced by the door loops.

I get acquainted with the design of this simple piece of furniture, one detail rushes into the eyes: despite the difference in the forms of the aspirations and their species, the base serves the rigid frame, there is a seat and legs. They decorate them in different ways, but the sealed skin or the leatherette give the products an elite, luxurious appearance and immediately do not define that the price of the product is within reasonable limits.

Although it should be noted that a neat emblem, covered by another material, can bring comfort and convenience to the room and looks no less elegant than the leather.

In order to update the design of your home, use additional furniture objects to which homemade deputies belong. Compared to the factory, they have great advantages: due to their size pouches are mobile, as well as multifunctional and light elements interior. For their manufacture, you can use different programmable materials in your home and independently choose the type of upholstery, color, shape, size. Such a product will eventually cost almost no investment.

How to make the father's hand, you will learn from this material, and nice pictures And the video instruction at the end of the article will simplify the task.

Easy way to manufacture soft puffs

We often lack time and desire to deal with patterns, so soft baffies can be made it like this:

From the tissue, we cut two circles, which in their diameter should be the same with the diameter of the nose and the top of the product. Be sure to leave the seams;
Next, cut out two identical details rectangular shape, whose width is the height of the PUPPI, Length - 1/2 of the length of the circumference of the bottom and the upper parts;
We cross with each other rectangular parts in width from one edge to getting a long tape;
Take one circle to it, we shoot on the seam, make the same manipulation with another circle. When an uneven seam is obtained, it can be sewn with a decorative border.

Case for the product This method is made simply and quickly. He is stuffed out soft materialwhich will be done at hand. At the end of the process in non-fired edges of a ribbon having a form of a rectangle, zipper is sewn.

"Chair" from plastic bottles

Plastic bottles can be creatively used in everyday life and even form practical elements of furniture from them, because plastic containers is cheap, comfortable, easy, and, in fact, eternal material. CHRISTERIVE PUPTIC of BOTTOOTS, you will acquire an indispensable thing that perfectly fit into the interior of the cottage or at home, will not take much space and will serve for several years.

For compact and soft seats, first prepare the bottles - wash them, remove the stickers. To make the container more stronger, put it in open video In the cold room for an hour, then we close the cork and put under a well-hot battery. Bottles are expanding due to the temperature difference and hold the form for a long time.

It is better to take such a furniture fabric as an artificial fur, tapestry. The fabric should have a dense base, to wear well.

You will need:

Stationery knife;
16 bottles of 1.5 liters;
Threads, needles, sewing machine;
Two types of scotch - transparent and double-sided;
Porolon (thickness - 3 cm);
Lightning;
Plywood (corrugated cardboard);
Fabric furniture for upholstery.

How to make the otfik:

We make a seat with its middle: I wrap a double-sided tape with a central bottle, to which we glue three more or four. Pretty fastening with a transparent tape;
We make a circle, the base is far in a straight and solid surface. We fix the scotch of each layer from the bottom to the top;
I cut two rounds from the cardboard, which in size correspond to the sidier of the pouf. We wrap below and on top of scotch;
Take a piece of foam rubber and completely wrap the future piece of furniture. We are selected to its edges on top of a round foam-shaped;
It was a turn of the removal of the measure, which we move to the fabric. Next, cut out products from the fabric product and spengtering. On the side of the cover in a loss of lightning and "dress" pouf in it.

We get a light and reliable seat, just as great suitable for the children's room.

Another seat variation from large number Favero:

This material is taken by a rectangular piece, a container is put on it and turns around. It turns out soft cun "with plastic stuffing" inside and bulk sideways. Tara lies a lot more than when a scotch wrap;
Such an empty is on bottled necks. For its stability and strength, take the containers twice as much. Cut the necks, we stuck in them a whole bottle, in the end we get a cylinder, which further decorate at your discretion.

Tire stool with back

From the tires you can make comfortable and durable deputies into the hallway or any other room:

Prepare two rounds from MDF or thick plywood, which should be in diameter a little less than wheels. They will serve to close holes;
We take bolts with nuts or screws, fasten the circles in three places.

Pupphic design can be issued in two variations:

Upper curled plywood Plywood Poroolone, to the side of the tires I will attach this material furniture stapler. Let's make a cover that stretch from above. If you have small squares of bars, you can paint and make the legs of them;
Method in the style of "Country". Take a woven thick rope, wrap my father-in-law, not forgetting to consolidate it with glue. Both rounds at first spirals first, then the side parts of the wheel. I hide the ends of the rope, cover the top of the lacquer.

You can enhance the resulting product and make the baffy with the back. It will take carefully processed wooden bars (five pieces).

They are attached at the bottom of the chair, for which all the bars are connected to the tire barrel with four bolts.
The back can be made with a small tilt back. To achieve this, the upper bolts are put with a gasket from the washers.
We make a pillow with a backrest of a two-layer foam rubber with a tissue cover. We sew tapes on it (by one third below the level of the top), they will also be tied to all bars. Ribbons fix the pad and simultaneously serve to decorate the back of the pouf.

Punch-pear

Consider how to make a pack of a bag that is fashion element Modern interiors.

You will need:

Paper on the pattern;
Tissue on the inner case - 300x150 mm;
Big density threads;
Strong and dense upholstery fabric (suede, tapestry) - 320x150 mm;
Zipper - 60 cm;
Polystyrene filler with a hollofiber additive - 0.5-1 cubic meters. meter.

On the inner case of the product, choose a sliding, smooth fabric. Thanks to her, the filler will easily roll over the bag and take the form of a person resting in it.

Pattern for roofing contains six bag wedges and one lower part for the base.

First drawings necessary details need to do on paper. Next, they are transferred to the fabric, which will be used on the outer and inner part of the Purphination;
When the stacking is left to the seams - 1.5 cm;
The bag for the upholstery should consist of parts that are in size a little more details for the filler, so the external case will be easier to wear on the sac with the filler;
We sew all tissue pieces of the bag. At first, it will be wedges that are stitched together, then proceed to the ground;
Leave a place for lightning outside;
In the inner bag, we fill the filler, which will take 2/3 of its volume, we flash the remaining places;
We put on top of the case, fasten the zipper.

Cute Putpick Pear will give your home comfort and comfort.

Product with drawer

To make a pen with a drawer, you need to execute the following instructions:

From chipboard, cut out 2 billets with dimensions of 37x37 cm and 37x40 cm, and one square - 40x40 cm;
Cut from a bar (4x4 cm by section) 4 parts 37 cm long;
From these elements, masturbation box at a height of 37 cm;
With a joinery glue in the inner corners, the timber bar;
Corners from the outside fix metal corners or screws;
We applied glue to the bottom and timber. Rodyshko glue, let's get dry. After that fix the self-drawing;
At the square of the square for the manufacture of the lid, we attach 4 locking bars. So the lid will be fixed in the box;
Find it with soft material (batting, foam rubber).

Such a piece of furniture can be perfectly used as a shoe kettle, which can be removed into the storage box from the season for the season.

Video: Detailed instructions, how to make the emblem do it yourself

Very practical to have round Puff in home interior. You can make such an ottoman with your own hands, but you will need a special tool. The manufacturer is not responsible for the quality of work.

For the production of POPIC, materials will be required:

Chipboard or plywood sizes 16, 18 mm;
Wooden pine timber 20 × 40 mm, but there may be other sizes;
Self-tapping screws 45 mm, in size, they are suitable for the best;
Fiberboard 3.2 mm, it is possible to 2.5;
Foam rubber 40 mm, 1 mm: density 25;
Sintepon 10 mm, possibly thinner;
Leathesis (eco), or fabric, natural skin;
Fliselin;
Adhesive adhesive;
Threads;
Staples or nails.

After the workpiece of materials, proceed to the production of PUPPIC

To begin with, cut out the bottom of the puff. For this, two halves of the chipboard are taken, two circles are connected and cut off. Sitting is ready.
For the manufacture of legs, the pine timber cut the length of 45 cm, 7 pieces.
On two circles evenly place space for mounting 7 brusons. For one bar we drill 2 holes. Samores, a long 45 mm, connect the legs with circles.
A small frame came out.
Warflake slabs cut into 2 parts at the height of the Purph.
The stove is fastened with 16 mm brackets on bars, as well as at the bottom and top around in a circle.
Frame ready. We begin to beat the emblem.
First, smear the top of the boof the glue of the brand "Alimp. Eco Glue "and we glue a thicap of 4 cm thick. After lubricating the sides and glue the foam rubber 1 cm.
Next, the whole soft surface is stuck with syntheps.
From the leatherette, we cut the upper part of the pouf in size of the chipboard, as well as the side sides and stitch on the sewing machine.
Ready upholstery stretch on pouf. The bottom is fixed with the pistol with brackets.
Flizelin close the bottom of the puff.
Fresh plastic legs with a screwover and screws on a tree with a size of 3 cm.

Cut out chipboard B. the desired diameter. Bar. necessary height Depending on the necessary puff height.

We upheat Fiberboard around the perimeter.

To level the folds on the upholstery material, we use Sinybupp.

Apply a pulverizer or simply manually.

Thorough thickness from above - 4 cm

We dress the case and clog the stapler or nails.

We screw the plastic legs.

Rubber puff ready.

To update the interior of the room, do not necessarily plant repairs. Change and revitalize the interior will help the additional piece of furniture made by your own hands. One of the practical and stylish things in the room can be created by the emblem with your own hands. Self-made puffs have plenty of advantages compared to the store, since you yourself can choose a form, size and material for its manufacture. In addition, when creating a masterpiece, you can use any blowing materials, so the pouf made with your own hands will cost almost free. Today we suggest you to get acquainted with non-standard ideasthat will help you create a unique and bright piece of furniture for any room.

How to make the father-in-law do it yourself from the girlfriend?

The deputies came to our life from the East many centuries ago and almost immediately won popularity, since this piece of furniture could serve both the chair and a table and a stand for feet. Today, craftsmen offer mass interesting options Production of cute options from girlfriend. Production of PUPPI WHERE HOVER - The work is not complicated, but very fascinating, besides, the thing created by your own hands radiates a special warmth and has a home coat aura.

Plastic bottles as a base for puff

If you do not have a desire to drink, cut the foundation for a pouf, you can use plastic bottles for this purpose, which are available in any house in an unlimited quantity.

Important! The color of the bottles in the finished product of the value does not have - you can use any bottles of beer or water with a volume of 1.5-2 liters.

For the manufacture of high-quality and sustainable PUPPU, you will need:

16 bottles with a capacity of 1.5 liters or 9 bottles of 2 liters with a capacity. Bottles use with covers

Important! From round bottles, you can create a large circle, square or rectangle. Product shape choose at your request and preference.

Packing cardboard. Any cardboard from household appliances, which has not thrown over for years, can be used for the manufacture of a pouf.
Scotch.
Porolon.
Upholstery. The fabric should be durable and high quality so that it can be wiped, clean and washed. You can use skin or furniture fabric, which is sold in a specialized store.
Pistol with hot glue.
Lightning for the case.
Scissors.

Important! If you plan to create a big dock, which will serve as a table or chair, then for the convenience of making a bottle, connect into separate sectors and sections by fixing them with scotch, and then start forming a common design.

Step-by-step instruction:

Take bottles with tightly closed covers and connect them to each other with a tape. If the future product will have a round shape, then connect the bottles from the middle: take one bottle and, moving along the radius, fasten the new elements with scotch.
After completing the circle, cut two circle from the cardboard of the same diameter, which should be a slightly larger design of bottles. It will be the top and bottom of the foundation.
Attach tightly cardboard to plastic design. Frame for puff ready.
Cut out 3 blanks from the foam rubber: 2 circles of one diameter and 1 rectangle, which will turn around the frame vertically.
Secure the workpiece with construction stapler or thread.
Sew cover on the emblem with your hand from furniture fabric.

Important! It is better to make a zipper case, so that then it can be easily removed and wrapping. You can sew a few options for covers and update the appearance of the product from time to time.

For frames, you can use cardboard boxes. The main thing is that there are no damage to them. Instead of the foam rubber, you can use a synthet board, insulation or several layers of dense tissue.
If you plan to use the father-in-law for personal needs, then for the manufacture of the cover, use a dense tissue, and the seams are treated with a border. For children's Purphination, use a brighter fabric, and a more dense layer of foam rubber. To the finished product, add an additional functional element in the form of stlescia that will make it easier for carrying. The child will gladly wear such a pouf with him as a toy.

Plastic bucket

An interesting solution for creating a furniture masterpiece is to use an unnecessary plastic bucket for the buffa frame. For the manufacture of useful and beautiful things you will need:

Plastic bucket.
Thick rope from jute.
Stapler.
Pistol with hot glue.
Scissors.
Cardboard or thin plywood.
Fabric for upholstery.
Microfiber (several new rags).
Ribbon velcro.
Big buttice or handle from the furniture locker.

Step-by-step instruction:

Wash bucket, remove the metal handle from it.
Turn the bucket, tightly wrap the outer surface of the rope.

Important! Each stitch is planted for glue so that the rope sat tightly.

The end of the rope doit, neatly hide.
Put the bottom of the blank to the cardboard, circle it.
On the scheduled template cut the circle.
Pattern decompose on upholstered fabric, cut out a blank with a 5-10 cm billet.
Connect fabric and cardboard. Do in the center hole, thread through the cardboard and fabric bolt from the furniture handle. Screw the knob on the bolt. If you use a big button, connect it a fabric with a cardboard in the middle.
Roll into the microfibra tube, radially wrap the bolt between cardboard and cloth, creating a kind of roll. Securely fix the microfiber with glue so that it does not unwind.
Tension the upholstery fabric, secure it on the back of the stapler.
Close the opposite side of the seat of another piece of fabric, put it on the glue to hide the tracks of the cardboard.
Cut the velcro to 4 equal segments, cover them on the bottom of the bucket and the base of the crosswise.

Important! The fluffy part of the velcro should be addressed to the seat, and the bristles to the bucket.

Connect the lid and base.

Puffy do it yourself ready and now you can sit on it with comfort!

Puf of stool

Completely chopped from durable stool can please the owners yet long yearsIf you make a stylish otfik from it. For alteration of the old stool in modern subject Furniture You will need:

Plywood.
Foam for seats.
Glue.
Upholstery fabric.
Stapler.
Saws.

Pre-design of the old stool strengthen the self-drawing and act as follows:

Stool legs a little short. Check the work in the level so that the product is subsequently staggering.
Attach 4 sheets of plywood to the legs of the closer with self-draws.
Screw the fifth plywood sheet from below. It will be the bottom of the future craft.
Pour the foam rubber for the seat with a 5 cm.
Melt the upper part of the Pufa glue, so that the foam rubbed in com.
Attach the upholstery fabric together with the foam rubber with a stapler.
Text to the cloth the remaining part of the design, lock it with the brackets.
Screw the wheels (optional) or legs.

Important! The foam rubber from the sides can be attached by the rails to give the design a round shape and make the emblems more beautiful.

Wooden Fund with a box for trifles

For those who like to work with a tree and has a carpenter skills, we suggest to make a fairly simple, but very functional and beautiful pouf with a drawer. In such a pouf, you can add children's toys, magazines or shoes.

For the manufacture of a practical product will be needed:

Laminated plate or chipboard sheet. The material is necessary for the manufacture of a circle with a diameter of 30 cm and rectangles with a size of 40x30 cm.
Wooden bars in the amount of 4 pieces and 4x8x8 cm.
Glue for wood.
Furniture wheels with special fasteners (4 pieces).
Metal corners (4 pieces).
Saws.
Screwdriver, screwdriver.
Foam and upholstery fabric for a cover.

Step-by-step instruction:

Couple prepared in size plates chipboard Thus, in order to get a 40x40 width box and a height of 30 cm. Use metal corners and screws to fix the material. The corners of the design must be straight. Connection locations additionally wake glue.
To the bottom of the design, glue the bars, on which wheels will be attached in the future.
Install the lid with glue and screws. Base Choose any form at your own way.
The frame is ready, proceed to the sewing of the cover. Put the foam rubber and furniture fabric in the shape of the lid. According to the contour, the tissue strip is 10 cm. You can set the canva, ruffles, drapery at will and your taste.
Put on the cover of the foam rubber layer and pull the cover on top.

How to sew pouf?

If you like to sew, you can make a soft aspic with your own hands at home not only from multicolored fabric, but also from old clothes. Any sweater can turn into a very noticeable and comfortable subject interior. The main thing is desire and fantasy.

Option number 1. Fabric

If you do not have time to mess around with patterns, then use an easy way to manufacture original subject Furniture:

Cut from fabric 2 circles with the corresponding diameters of the niza and the top of the product and allowances on the seams.
Cut 2 rectangular details of the same size. The width of rectangles should be equal to the height of the puff, and the length is half the length of the circle of the top and lower Parts Products.
Rectangular parts Sew the width on one side to get a long tape.
Get the resulting tape and circles. Put the circles on the seam. If the seam turns out to be not smooth enough, close it with decorative border.
Ready Cover type by any suitable material.

Important! For internal filling Pouf Use foam rubber or syntheps. These materials perfectly hold the form and are not deformed.

Head zipper in the unimposed edges of the rectangular tape.

Important! Hole for gaskets Make it from below so that it is not noticeable. Optionally, you can sew it tightly or insert it in a hole in the hole in order to be able to change the material if necessary.

You can make a pouf in the form of a cube. Details for the product must be square shape. On the sides will need 4 parts, and on the base and bottom - 2. Take the details to each other, and to clearly designate the edges of the cube, use the canvas of contrasting color.

Important! For the manufacture of a cube, use a more dense fabric to give the product of strength and elasticity.

Option number 2. Multicolored fabric pouf

Sew a bright piece of furniture is quite simple. To work, you will need:

Fabric of different colors.
Lining fabric.
Large buttons (2 pieces).
Filler.
Needle with threads.
Sewing machine.

The process of making a bright masterpiece is simple enough:

Draw a circle on paper desired size (What kind of pouf you want to get). Divide it on 12 parts. If you have a smaller number of colors, you can split the circle on 6-10 parts.
Finished patterns attach to the fabric, cut triangular blanks with a small margin on the seams.
Similarly, cut the lining tissue.
Grab the Petals of the Circle threads, and then step them on the typewriter. There should be two round bases - top and bottom. Sisting the foundation from the inside, leaving one part unenvissed.
Remove the case, place the filler inside it.
Gently sew the last part. Place stitching close up with large buttons.

Important! In order not to spend money on the purchase of new fabric, use patchwork from old clothes.

If you like to knit with crochet or knitting needles, you can make a soft frameless emblem with your own hands:

To work, the maximum thick knitting needles with a diameter of 9 mm and rather thick wool. Cotton ropes can be used (20-30 pieces).
Tie them in a long rectangle.
Stripping the workpiece to be built with a rope to get a spacious skirt, and pull the bottom with the same rope to get a bag.

Important! To fill the bag, you can use old things or purchase a foam rubber (Hollofiber).

Option number 3. Furniture from an old sweater

To make the original subject of the interior, you will need:

Old sweater.
Scissors.
Needle and threads.
Felt.
Lining fabric for cover.
Material for packing.

Step-by-step instruction:

Cut from felt bottom for a circular or square form. This element will serve as a primary workpiece.
Take a sweater, remove the sleeves inside.
The remaining hole is worse with a smooth seam.
Cut to the bottom of the sweaters of the workpiece from the felt so that the bag is the bag.
Prepare a cover for packing from lining fabric. If the primary billet from the felt has a round shape, then there will be a cut of the tissue in the form of a rectangle, for example, with a length of 70 cm and a width of 50 cm. If you decide to make a square emblection, then calculate the necessary sizes for four parts.
Sweep all the details of each other and leave the bending from above for the lace, which the hole will be delayed after filling the case of the material.
Put the cover inside the sweaters.
Fill the case material. Tighten the lace as much as possible.
Pour the sweater, enjoy the new interior item.

Option number 4. Puffy Shar

If you do not know how to make a round ottoman with your own hands to decorate the children's room, then this option is for you. To make a children's father-in-law with your own hands, prepare the following materials:

Fabric S. high density Two colors.
Paper for making patterns.
Scissors.
Needle and thread.
Sewing machine.
Polyethylene.
Silicone filler in the form of balls.

The process of creating a Puriface Bowl Next:

Make a pattern on paper, observing the necessary dimensions. You can use any round interior object to create patterns, such as a downtile lamp lamp, or a big ball. Measure its circle, and the result obtained is divided by half. Exercise a number on 5 parts in such a way that 3 medium and 2 extremes were the same size. As a result, you will receive the diameter of the base in the form of a circle and the width of the strips constituting the puff-shaped case.
Transfer the marked markup to your chosen item, starting with the part in the form of a circle. The next line is lower than the previously calculated strip width.
Polyethylene package on one side and cut the bottom. Explore the package on the marks of the first strip, and the edges will fasten with scotch. Take a quarter of the strip on the package and cut out. Similarly, blank the part of the middle strip.
Translate all the parts to millimeter paper, take the details of the PUPPU from the tissue of two colors, leaving 1 cm on the seams.
Stop stripes, leaving one of the parties is not sewn.
Attach one strip to a round part. The ends of the strip must come together. Stop them and connect the base with a strip of seams, retreating 1 cm from the edge.
Sustrate the similar workpiece for the opposite side of the cover. Cut the blank to the middle strip. Middle stripes do not extend.
Still second semicircular workpiece with middle lane. Seams reveal.
Fill the case with silicone balls, and so that the form is elastic, add a small piece of foam rubber.
Hole squeeze the secret seam.

What can the father-in-law make your own hands?

Above, we told you how to make the otfiki do it yourself, the master class of each product option will help you to make a conceived. However, all materials for the manufacture of the original furniture item cannot be accommodated in the framework of one article, since there are a huge number of items suitable for creating a masterpiece, such as such.

Tires

Wonderful emblems with your own hands from tires can be put at home, on the veranda pricework Or right at the cottage, replacing expensive rattan furniture on almost free.

To make practical furniture, It is enough to cut two circles from plywood and attach them from above and below the bus. Then - consolidate the foundations with self-draws and decorate the entire harvesting of the twine. So that the otfik was a little higher, you can fasten two legs.

Important! With 2. automotive tires And the sheet of bending plywood can be made of a chair with a back.

Plywood and Vinyl

Plywood sheets with 45x45 sizes and 45 degree sections are used for the manufacture of a frame. In size plywood cut the vinyl with a reserve of 2-3 cm. On top of the vinyl, put a soft cloth and not thick foam rubber, close the entire design plywood sheet. Vinyl upholstery, bend and secure the stapler. Use metal corners and screws for fastening the frame.

Important! You can decorate the vinyl finish with decorative cloves. Take the floor with the drawing on the vinyl and create an interesting pattern with carnations. The paper is easily removed, as a result, it turns out a beautiful baffy from plywood with an original pattern.

Faux fur

Fluffy material can be used to make a seat or to create a whole product.

Plastic pipes

Production of Pouf Is. plumbing pipes as follows:

First you need to cut pipes on a piece of 30 cm long (about 9 pieces), then the pipes are painted acrylic paint In several layers and handle protective varnishes.
After drying the pipe, it is necessary to braid the adhesive gun.
For seats, you can use polyurethane bathroom mats. Fold them in half and make slots on perforations (length of cuts of 5 cm). Rug roll up to get a bud and insert rolls in the pipes. Contribute buds should be tight, then no additional fastening is required.

Important! In the manufacture of a pouf, pay attention to the floor indoors:

Since the laminate is very sensitive to any mechanical impact, it is better for such a coating a pouf without wheels and legs.

We hope that having become acquainted with our article, you picked up for yourself suitable option The manufacture of the original, functional object of the furniture and decorated them the interior of the house. Now in a soft homemade baffy or armchair, you can relax, watch TV, read, and you can place the emblem in the corridor and it is convenient to removed shoes on it. And most importantly - in the manufacture of your masterpiece you used unnecessary things and materials, while spent the minimum of funds!