How to make an outdoor shower in the country: step by step instructions, photos, videos, recommendations! Useful crafts for giving from plastic pipes Summer shower from plastic pipes with your own hands

An outdoor shower in the country is a great way to cool off on a hot day and tidy up after gardening.

For the construction of a shower, it is better to choose a sunny place, preferably not far from the house.

Collapsible or stationary?
By design, showers can be either collapsible (you can disassemble completely, or remove only the casing), and stationary. Materials for construction are chosen based on what kind of shower you need.

For example, a fully collapsible shower stall can be made from polypropylene pipes, corners and thick tarpaulin or film. But it should be remembered that in this case the water tank should be as light as possible. In addition, such a shower should be fixed to the ground with staples so that it will not be blown away by a strong gust of wind.
Photo: Summer shower frame made of polypropylene pipes

Frame
In general, the frame of the shower stall can be built from:
- wooden beams
- metal corners or pipes
- metal arc
- polypropylene pipes
At the same time, wooden and metal elements must be processed so that they will serve you for more than 1-2 years.

Sheathing
The most popular cladding materials are:
- wooden boards (requires processing for moisture resistance; short-lived, but one of the most affordable options)
- tin sheets (durable, but anti-corrosion treatment is required; quite expensive)
- opaque polycarbonate (does not require additional processing, durable)
- thick film or tarpaulin (the cheapest option, ideal for collapsible showers, but short-lived and inconvenient to handle).

But you can also use a shower curtain! Fix the metal arc on the main wall, install the pallet, fix the shower curtain on the arc, fix the tank on the wall or supply water and the shower is ready. Photo: Summer shower

Stationary shower
If you want to install a stationary or semi-collapsible shower on your site, then a general universal scheme will come to your aid. We dig wooden beams or metal corners with a length equal to the height of the shower + 25 cm into the ground, fix the upper beams and proceed to the sheathing. At the same time, do not forget to recede 20-30 cm from the floor so that there is space for ventilation. Then we build a door, which we sheathe with the same material as the walls, we hang it on the hinges, we fasten the handles on both sides, the latch on the inside of the door. If you will use a tank to supply water, then attach a sturdy board to the shower stall on which you will install it. Photo: Stationary shower

You can also build a shower like a snail: you won't need a door in this case.

Floors and drain
In addition, you need to worry about the drain and the sump. It is recommended to arrange a drainage drain for a summer shower: we dig a hole with a depth of 50-60 cm, fill it up to half with gravel, broken brick or small stones.

There are 3 basic flooring options: stone (concrete), on which you can put a rubber mat in the future, and a wooden pallet or shower tray. A stone floor or shower tray is more expensive, but will last much longer than a wooden one. Photo: shower tray

Water
How to ensure the supply of water to the shower also depends only on you and your capabilities. The most affordable option is a tank. In a metal tank, especially black in color, water heats up quickly enough, it is durable, but it is prone to corrosion, in addition, it has a fairly large weight.

The plastic tank is lightweight, fairly inexpensive, but won't last too long.

In any case, it is advisable to organize the water supply to the tank using a hose, and install a shower head on the tank itself.

Another way: organize the water supply from the central water supply. In this case, it would be ideal to install a small instantaneous water heater so that it is comfortable to take a shower at any air temperature.

The best rest after hard work at your summer cottage is a pleasant, warm, relaxing shower, which will not only have a calming effect, but also relieve the nervous tension that has accumulated over the whole day.

To install the shower, epoxy resin is used for the manufacture of which special fillers for resins are used.

Therefore, many gardeners equip their plots with summer showers.

Outdoor shower at your dacha

The outdoor shower is perhaps one of the most important structures on the site. With the help of it, you can not only wash your body after a whole day of work on your site, but also refresh yourself in the summer heat.

Before you mount a shower stall on your site, you need to choose the best place for this. The shower should be located a short distance from the main structure, most often behind the house.

After the owner of the site has decided on the area for the shower and the size of the shower stall, he can proceed with the installation. This room must be at least 1 sq. M. in area, but preferably a little larger.

If a shower dressing room is planned, in order to undress and hang dry things, the area of the building is doubled. The height of the building is usually approximately 2.5 meters.

In general, the dimensions of our cab are obtained equal to 1.0x2.0x2.5 m, this is the best option. If the installation of the cabin is planned from wood, then it is necessary to mount the frame using wooden beams or metal corners.

The walls in the shower cabin, for a better ventilation method, should recede from the ceiling and floor by twenty centimeters. They can be constructed from materials left over from the main construction of a manor house.

Shower equipment with water supply

When installing a shower stall in his summer cottage, the owner must necessarily think over in advance how to equip the water supply and drainage. Since the drainage and supply system is installed at the time of laying the foundation of the future shower cabin.

Water in the shower stall is very often supplied from a source located at a distant distance. Such a source can be a well drilled on the site, or a standard water supply system.

Nowadays, due to the presence of small diameter plastic pipes, it will not be difficult to connect the cabin to the main source of water supply. Than these pipes are advantageous, they are more durable and do not get covered with rust and various erosion, like metal pipes.

They are sold in coils, and there is no particular hassle during the installation of the pipe for the water supply, it is only necessary to provide a connection to the main source, which can be done with a small, rubber piece of hose.

You can just as easily connect a plastic pipe to a storage tank for a shower. The advantage of such pipes is that if they were not installed thoroughly, they can be easily removed from the site for the winter period.

Draining the shower

The drainage of water after washing can be done in various ways. Some owners of summer cottages absolutely do not drain the water.

One of the most normal ways is to drain water into the centralized sewage system, but, unfortunately, not every owner of a summer cottage has such an opportunity.

The best way, of course, is the sewer and drainage pit. This is cost effective and allows the wastewater to sink deep into the ground. A pit for drainage water can be located under the shower stall, or in the immediate vicinity of it.

It is dug to a depth of no more than 50-60 cm, the size of the sides is 1.0x1.0 m. After the hole is dug, the soil in it is tamped tightly and it is covered with rubble or broken brick.

A plastic, steel or wooden pallet is placed on top of the filled hole.

After that, a shower stall is mounted. If the wastewater pit is nearby, it is best to drain it from a plastic sewer pipe.

Photo of ideas how to make an outdoor shower in the country

You can make a variety of crafts and many useful things from the simplest and most affordable material, for example, plastic pipes. They can be purchased at specialized stores. Many owners have left them after renovation and lie idle in the barn. Therefore, you can safely get them and start creating. And from our article you will learn original ideas for pipe crafts.

Plastic pipes for crafts: advantages

Plastic pipes allow you to create excellent prefabricated and collapsible structures. They can be used in an apartment or in a country house. Crafts for children will also look great.

The advantages of this material are as follows:

the possibility of using without preliminary painting or with additional surface decoration;
the compactness of the collapsible structures being created;
non-toxic when heated;
high strength and rigidity of parts;
the ability to create a variety of designs using connecting elements - couplings and fittings.

With the help of uncomplicated material, you can create original products and please your friends and relatives with a gift.

Methods for fixing workpieces

If you are interested in the question of how to make an interesting craft with your own hands, then to give the plastic products the desired shape, you should stock up on some set of tools. You will need a gas torch, metal saw or jigsaw. Homemade products can be solid, connected with adhesive and bolts, or collapsible.

Can be used to connect the socket with the seal. However, this requires a lot of time and effort, but the connection is unlikely to be tight enough.

If you nevertheless decide to use this method, then the pipes must be cleaned of contamination in the places of the future connection. The edge of the pipe to be inserted should be coated with grease. When the pipe is completely in the socket, it must be pushed back a little. This will allow you to further disassemble the structure.

The use of glue helps to make the structure more durable. The parts are first processed with sandpaper at the connection points, followed by thorough degreasing. The glue must be applied to both sides of the fastening - both the inner and the outer. When joining, the pipe is inserted tightly to failure, and then a quarter turn is made. After this, secure adhesion should be ensured by tight fit of the parts.

The option with bolting will be very laborious, as can be seen in the photo of crafts from plastic pipes. The master will need to mark the places where the holes are drilled and use a drill in the work. It is no longer necessary to glue, and the connections will be very strong.

Products for home and apartment

To make wonderful accessories for an apartment, you do not need detailed instructions for crafts from plastic pipes. Enough skill to work with tools and imagination.

If you cut many cuts of wide plastic tubing and then staple them together, you can create comfortable shoe sections. The size of the blanks in length should correspond to the size of the shoes of your household. Of course, you can make shelves with short crossbars when the heel of the shoe hangs down.

But constructions that correspond to the dimensions of boots and boots look more comfortable. The cells can be fastened with couplings with glue, self-tapping screws or bolts. Cells for storing wine bottles in the cellar are made according to a similar principle.

By connecting the plastic pipes vertically, you can create a nice hanger. Pipes inserted into the tee will be used as garment holders. And for the rigidity of the attachment inside the vertical structure, it is advisable to insert a holder made of wood or a rod made of metal.

Pipes of wide diameter can be used in arranging colored flowerpots, and medium-sized workpieces are suitable for vases. Having pasted over such products with colorful pictures or photographs, you can perfectly decorate them. From short scraps, original lamps are built on a desktop or floor lamps.

If you fix the parts with the end, cut at an angle of 45 degrees, to a wooden base attached to the wall, then you get stands for pens and pencils. Placing the cylinders vertically will create a perfect base for your tools. And, of course, a laptop stand, fastened with special fittings, will look great.

In the bathroom, a cut-off pipe with three outlets is suitable for use as a holder for a hairdryer. If you fix the cylinders on the cabinet door, you can insert other devices into them, for example, combs, curling irons.

There is also a place for these homemade samples in the kitchen, which you can find out about by studying a master class on crafts from plastic pipes. Firstly, these are original containers for storing forks, spoons and knives. And secondly, the cylindrical part can be used as a glass holder. It is only necessary to take a pipe with a length of 0.5 m and make a longitudinal cut through on one side. The legs of the glasses can be inserted into it. And the pipe itself can be attached to the ceiling or hanging cabinet.

Products for children

Crafts from plastic pipes for children are also varied. What can be offered to little family members:

Spacious playpen.
Children's swing in the yard.
Lightweight and mobile sleds.
Football goal.
Frame for a spacious house.
Outdoor shower at the dacha.
Screen for theatrical performances.
A fence for a crib and a fence that limits the exit for the baby from the room.

The kids will also be delighted with the improvised locker for storing toys. A compact table and chairs and plastic pipes will perfectly fit into the interior of a children's room. Children themselves will be able to eat or arrange get-togethers for dolls.

Cottage arrangement

Crafts from plastic pipes for summer cottages and gardens are also popular. A light and mobile clothes dryer will fit into the country interior. In sunny weather, it can be taken out into the garden, and when it starts to rain, it can be brought under a canopy. The frame for garden furniture will be strong.

You can make a comfortable chair or chaise longue and cover it with a durable fabric. You can give the desired shape to the workpieces during the manufacture of, for example, a chair, using a gas burner. The pipe is heated and bent to the desired angle. Then it should be left to cool down.

You can decorate a terrace or gazebo with a variety of panels. The pipes must be cut into shallow rings, fastened with glue and hung on the wall. Partitions are constructed similarly, allowing to separate functional areas in a country house or in a garden.

Gardening enthusiasts can create flowerpots or vertical beds. Having installed a fence made of pipes, having planted climbing plants near it, after a while you can get a hedge near the house.

If you connect the pipes to each other around the perimeter, you get a pen for pets. And the sewer pipes themselves act as excellent feeders, the construction of which does not take much time.

There are other options for using plastic blanks:

construction of a light gazebo;
arrangement of a carport;
installation of bike holders.

Using the simplest material - plastic pipes, you can create convenient, very useful items and accessories for your home and garden. Such homemade products will delight both adults and children.

Camping is a great way to relax. Some leave for the village, others go to the dacha, where comfortable sun loungers are waiting for them, allowing them to forget about the environment and take a nap. Such attributes relieve tension from the spine and almost all muscles, you just have to choose the most comfortable option for yourself: a rocking chair, an ordinary folding chair or a lounger.

The easiest way is to buy a ready-made chaise longue, choosing it for the interior of the cottage or for your individual needs. But not everyone has the financial ability to do this. A hand-made model is more appreciated and fully corresponds to the taste of its owner.

Views

It is not difficult to create homemade sun loungers. Before starting work, you need to choose the type of this furniture that you want to bring to life. There are several of them:

Armchair. As a basis, you can take elements from a crib or cot. Armrests are optional.
Lounger. The creation process takes about four hours. The product can be made of plastic or wood, which is perfectly sanded and varnished.
Rocking chair. Its back is at an angle, so there is an opportunity to lie down, relax, take a nap. At the same time, it is important to make the bottom of the attribute strong so that it does not loosen when swinging.

In addition to the distribution of products by appearance, there are variations in the types of structures:

Monolithic. When creating it, all the elements are fastened, so disassembly is impossible. Such a chaise longue is strong and durable, but the backrest is not adjustable here and the product as a whole does not fold. As a result, transportation problems may arise.
Portable. The reliable and compact folding attribute has a special mechanism that makes it easy to adjust its position.
Soldered with inserts. A practical product that will decorate any interior thanks to its attractive appearance. But inserts made from other materials do not guarantee durability.

If the chaise longue is made of durable materials, you can add a blanket, pillows and other items for a comfortable stay.

Possible materials

When choosing a material for making a sun lounger, you need to take into account its location. This can be a summer cottage, a beach, a special place by the pool, or even at home. There are the following options:

Wooden. This design is durable, comfortable, environmentally friendly, differs in shape and appearance. The only drawback is the heavy weight. To make it easier to carry the chaise lounge, castors are attached to the legs.
Plastic. The products are lightweight, inexpensive and easy to care for. On the negative side - fragility.
Tissue. The attributes are convenient and compact. The frame can be made of boards, metal, shaped pipes.
From rattan. Against the backdrop of nature, these loungers look incomparable. They are environmentally friendly but expensive. If you have weaving skills, it is easy to make such an attribute for relaxation.
PVC. The same lounger with a fabric base, however, the frame is based on PVC pipes.

It is not difficult to make a sun lounger on your own, you need to correctly determine the size of all the elements and spend several hours assembling them.

Manufacturing scheme of various options

Before you start making an attribute for rest, you need to draw a diagram of it. It plays an important role, because it determines the dimensions of the elements for the product, their shape, quantity and other details. You can make such a scheme yourself, but not everyone can do it. Therefore, we will give an example of such a scheme. A high-quality chaise longue (fabric) will turn out according to such a drawing with dimensions.

It remains only to find materials to create a sunbed. There are also other options for drawing different types of sun loungers.

From a wooden lattice

Such a chaise longue is quite durable, reliable, and its back is adjustable. For such a model, you should take coniferous wooden slabs, since they are resistant to climatic changes. Here is a diagram with the dimensions shown:

All work is done in stages:

A frame is created from bars, it is fastened with metal corners.
Boards are attached to the outside, and legs are attached to them.
The slab is sawn with a jigsaw and a wooden grate is made.
The adjustable backrest is detached from the main body of the attribute and is fastened to it with a door hinge.
In the headboard area, a fastening strip is attached, and a rack is attached to it with screws.
The finished product is sanded and varnished.

If the lounger will often move from one place to another in the future, it is better to attach wheels to its legs, because the weight of the attribute itself will be considerable.

Fabric on the frame

The work on the frame takes place in this order:

A ready-made base is taken from a cot or cot. In the absence of such, the slats of the required length are taken or cut and grinded.
Holes are drilled in the main frame, the other is supplied with cutouts (4 pieces) to adjust the backrest tilt.
Holes are made at both ends of the rails to install the seat.
Round cross members are lubricated with glue and installed in the holes.

Now you need to prepare the seat itself. To do this, you need to fold the base of the product and measure out a piece of canvas. It should sag to accommodate the wearer comfortably. All edges are sewn on a sewing machine. Then a transverse round bar is wrapped with a canvas and nailed on both sides with small nails. The attribute is ready and you can enjoy your vacation.

From pallets

This is the easiest way to create a lounger. Such a product is lightweight (easy to move to different places) and practical (you can put a mattress on it for greater comfort). The work takes place in the following order:

Disassemble pallets, all nails are pulled out.
A frame is made of two even boards. They are laid with an edge and parallel to each other, and the rest are sawn in half and attached to the base. The result is a seat with two support legs in the back.
To create the front legs, the board is cut into two equal parts from the pallet.... Then, using bolts, they are screwed to the base of the seat and tightened with nuts through washers. A cross bar is needed to strengthen the legs.
The backrest is created from two boards, which are connected to the seat frame with bolts, nuts, washers. This should be done at an equal angle. After that, boards for the back are attached to the support boards with screws. A bar is attached to the rear legs behind it - this is necessary for the strength of the structure.

The final step is sanding the attribute with an emery sheet.

To prevent decay of the boards, the product is varnished.

From polypropylene pipes

The drawing of such a chaise lounge is identical to the fabric one, only the wooden frame is replaced here with polypropylene pipes. To create a product, you need 2-inch pipes, fittings in the form of the letters "g" and "t" 8 and 6 pieces, respectively. The build process has several stages:

First, a vertical plank is made. A T-shaped connector is taken and with its help pipes of 30 and 45 cm are fastened. L-shaped fittings are put on the ends. The lower vertical is also fastened and the two sides are connected.
An important point: the horizontal bar must be solid and have a length of 66 cm. on is mounted closer to the joint with the letter "t", which must be directed to the inside of the structure. The other side is two pipes of 30 cm, held together with a T-piece. This tee must be turned 45 degrees from the elongated side. The end result is a rectangle.
For the swivel seat, a 5 cm pipe is inserted into the triple connecting piece and secured with the same piece. This will be the base of the horizontal wireframe.
The long sides of the horizontal frame are made in the same way as the vertical one. For the crossbeams, a tube 30 cm long and another one consisting of 2 x 20 cm with a tee fitting are taken. The result is a rectangular shape in the same shape.
The seat will be between a short horizontal section and an oblong vertical section. After adjusting the tilt level, the support is inserted at the back.

The frame is ready, which means that a fabric base is now needed. To do this, take a dense canvas and fix it on the base.

"Kentucky"

Such an attribute for relaxation has a number of advantages: compact, convenient, easy to fold, lightweight, durable and reliable, and takes up little space when folded. It looks like a high-backed chair. The unusual assembly method looks original. To do this, you will need bars, galvanized wire (diameter 4 mm) and the same brackets for fixing the wire (16 pieces), nippers, a hammer. The process goes like this:

A protective coating is applied to the bars. But the parts should already be ready for assembly.
Holes are made. However, they should be a couple of millimeters larger than the wire.
The bars are assembled in an interesting way, which makes the whole structure look creative. This diagram is:

At the end of the entire process, the chair is gently lifted and unfolded. Such a folding product looks stylish and modern.

Original ideas

People with creative thinking do not always want to see simple sun loungers on their territory, so there are several original ideas for creating models for relaxation.

From birch woods

This design has an unusual look, so you have to work hard. For such a lounger, birch logs with a diameter of 75-120 mm are needed. But you need to take into account that the larger the diameter of the chocks, the more the product will weigh. Before starting work, you should stock up on the following tools:

electric saw;
drill;
set of drills;
self-tapping screws;
staples.

What can be made from plastic pipes

Most people immediately have a question: "Is it possible to replace PVC pipes with polypropylene ones?" ... You can use polypropylene pipes, only in this case we still need a soldering iron.

Advantages of PVC pipes:
- snow-white color;
- you can connect pipes with fittings with glue, or without it at all;
- if you do not use glue, then the structure will turn out to be collapsible, and, like the LEGO designer, you can use fittings and pipes to assemble other structures.
Of course, polypropylene pipes are devoid of these advantages.

Now, let's see what kind of crafts you can make from plastic pipes with your own hands:

From plastic pipes you can make:

High chair made of 1 ″ pipe

1 ″ tube folding chair

Country tables and chairs made of 1 ″ pipe, for outdoor use

Greenhouses, greenhouses and light frames on beds for sheltering plants, assembled from polypropylene pipes and connecting elements, are a very budget option, combining cheapness and ease of assembly. If necessary, they are just as easy to dismantle.

Sturdy and stable racks for growing and handling seedlings.

PVC pipes of a larger diameter, neatly cut from above with a jigsaw and filled with soil - a compact and aesthetic option for planting greenery.

Children's 2-tiered bed (used pipes with a diameter of 3/4 ", 1" and 1 1/4 ")

A bed for dogs, the diameter of the pipe in this case is selected based on the size and weight of the dog.

Hanging swing for summer cottages

Sleigh for chores in winter in the country

From the remainder of large diameter pipes, you can make a small organizer in the garage

Dryer for clothes made of PVC pipes.

By attaching the wheels, we get very comfortable carts.

A greenhouse made of PVC pipes will serve you for many years, it does not need to be painted, and it will not rot or rust, as is usually the case with greenhouses of wood and metal.

You can assemble hydroponics from plastic pipes, but in this case I want to note that you can use any pipes (including sewer ones)

Children's car made of plastic pipes

Or make a chicken pen

Shelving units that can be easily assembled for any size

Collapsible outdoor tents and plastic pipe tents

A grape grate made of plastic pipes that will always have a pleasant appearance.

Carports made of plastic pipes

Fences and fences made of plastic pipes

PVC pipes are readily available material for useful ideas and tools on the farm. What do you need for this? Hacksaw, tape measure, glue, in some cases sandpaper.

1. Rack for drying clothes.

2. Drinking system in the chicken coop.

3. The little boy.

4. Racks.

5. Bicycle rack.

6. Rack for containers with vegetables.

7. Summer velomobile.

8. Various tool holders.

10. For storing shoes.

11. Outdoor shower for children.

Simple constructions of garden furniture, assembled from polypropylene pipes, will help you to relax and unwind in a shady corner of the garden.

How do you, for example, comfortable models of chairs?

A comfortable chaise longue, an impromptu canopy for a morning meal in the fresh air, or such a model of a stand in the spirit of "life hack" that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

Children in the country are a separate burning topic. The ubiquitous kids need to be given the opportunity to play and misbehave in such conditions so that their parents are calm.

For kids in the country, you can assemble such a convenient playpen or a cozy toy house. These designs can be easily carried to the garden or veranda, and your child will always be in your field of vision.