Drinking from plywood - needlewomen with Forumhouse share experience. How to cut by jigsaw plywood crafts - simple drawings for beginners products from plywood drawings

If your new passion has become cutting into a variety of decor elements, burning or wood carving, then our advice will start with such material as plywood.

To do this, there are several significant causes at once:

With plywood enough just work.

If in your hands it turns out good tooland you start with figurines small size, then their manufacture will take you only a couple of hours.

The material is universal in use, so you can make it literally all that you wish: Furniture, toys, minor decor elements.

All this can be an excellent addition to the interior of your home.

Work features with material

What is a plywood sheet. It consists immediately of several veneer sheets that are interconnected with glue.

Important: Plywood can be different types: based on beech, birch, pine.

From what exactly you choose, not only quality depends finished productBut even its structure and color.

If you are going to drink various figures using a jigsaw, then you need to choose the highest quality grades of plywood.

They are characterized by a special strength that ensures that the plywood will not crack, spoiling the entire appearance of the product in the most unpredictable moment.

If you are going to start work immediately, immediately on the day of purchase, then choose only dry sheets of wood.

They will not break the pubsik pylon every 10 minutes.

To work with plywood you will need to get a number of tools.

In principle, they are constantly alone for all types of products, so you will need only a unite attachment:

Lobzik
Pilking for jigsaw
Manual or electrician
Rule
Grinding machine
Egypt.

Framework

If you want to make your home beautifully or present someone from loved ones original gift, do it yourself a frame of plywood.

The preparation process will not take much time with you, because you only need to get the necessary materials.

Note!

They are standard for all cases, and we have already mentioned before.

We will offer you master classes of light crafts from plywood. You can make both an ordinary direct frame, and extend various patterns and figures on it.

First you need to make a template, and after that you can cut it, cover the contour with a pencil on plywood and proceed to the manufacturing process.

This stage is not only the most responsible, but also the most exciting. If you put a part of the soul into work, everything will definitely work out. Ready design It is necessary to open lacquer. Ready!

Puppet furniture

This task will be a real test for parents.

Note!

The so-called test of the acquired skills in design.

Feature of creation puppet furniture It is that children do not tolerate false.

If they see that the furniture is not worked out in detail, but instead kitchen Plate For your favorite doll, you brought a regular bar rectangular shape, I just can not be avoided serious offense and children's disappointments.

The second feature of the manufacture of such crafts from plywood using the jigscription is that all this furniture should be carefully worked out emery paper or grinding machine.

Your child will be constantly in contact with these self-tasks, and in the case of poorly treated edges - can be bored.

Note!

Well, the last feature of crafts from plywood and at home is that materials for such furniture should be absolutely non-toxic and normal for permanent contact with the child, because he can drag it into his mouth or take a bed with him.

This is not a simple applique or handicraft from paper, so things need to be taken seriously, following the entire list of actions necessary for implementation.

Performance of plywood

how simple furniture It is made equally, and then going to one piece of interior, so crafts from plywood with their own hands should be performed separately.

For this, the first thing to prepare special drawings of crafts from plywood, in which specify the dimensions of all parts and their mounting.

Take the finished plywood sheet and attach it a paper detail template.

Circle the part of the pencil and extend the jigsaw along the contour.

After that, each detail needs to be cleaned with sandpaper or grinding machine and only then collect the furniture element.

When you finish with the whole set, open it with varnish.

Below provided different variants and photo crafts from plywood. Choose the one that you like.

Stock Foto Crafts from plywood

Wood and sheets (plates) on its basis are one of the cheapest and fuel materials. For lovers to work with a junk, interest primarily represents plywood.

It is her homemade craftsmen most often choose for the manufacture of various crafts. If you correctly organize work, you can create real masterpieces.

Crafts from this material are performed for various purposes, but mostly they can be divided into two groups - to decorate the premises or territory (for example, fences on the inside, garden plot etc).

A variety of plywood

If you focus on optimal combination Such indicators as quality and price, the FSF or FC products are selected. It is characterized by resistant to dampness and temperature jumps. This one is quite enough for the durability made by their own handicrafts was provided. But between these varieties of plywood there is a fundamental difference - in component composition glue, which fasten the layers of veneer.

In the first case, it is toxic, so FSF sheets are applied only with external work. But for crafts intended for the room in the house, the Plywood FC is quite suitable. Its analogues are much more expensive because they are not considered as a material for simple, lungs performed by crafts.

Type of grinding sheets

It is easy to understand: sh1 and sh2 - respectively, one- and double-sided; NSh - plywood rough processing. That is, the cradle will still have to "bring to mind", grind. The choice of this parameter depends on how it is planned to be placed in the future and place. Sample fixed on the wall and, for example, a statuette (stand, vase, toy or other), which is viewed from all sides - things are different.

Plywood texture

Here a lot depends on personal preferences. If planned when applying a protective coating of crafts to save natural view Tree, then under the varnish it is better to purchase Phaneur from the birch veneer. But for subsequent coloring it is desirable to choose pine.

For various crafts from plywood, it is desirable to navigate on oil or acrylic basis. Explanation is simple - they are less susceptible to the sun, therefore do not have to update outdoor coating; It will not change the initial appearance for several years.

Crowded plywood

Choosing a sheet for crafts, it must first be inspecting for bumps and inclusions. Significant defects will not only complicate the cutting material, but also initiate the appearance of cracks or "holes" (as a result of the loss of the same bitch). Next is the inspection of end surfaces. In the process of plywood cut, dynamic loads (vibration) are subjected. If at least the signs of cutting of the veneer are noticeable on the side parts, such a material should not be purchased, even if its price is too seductive.

In the future, in the process of making a craft, many problems will arise. As a result - the rejection of plywood and its increased consumption. In total expression, this for money will be released about the same as compared to the acquisition of the high-grade material, and at the time spent and the quality of work is a big minus.

Thickness of sheets

If the crafts are cut with an email / tool, it is limited to 30 mm. For the jigsaw manual it is advisable to use relatively thin fan; Three-layer maximum. That is, no more than 9 mm thick.

What will take for work

Lobzik

These are a priori we are talking About making crafts with such a tool. The question is different - what exactly to work. Electrical models It is much more expensive than manual analogs, but have a lot of advantages. About in.

For example, high speed And the accuracy of cutting, the purity of the edges, the ability to change the parameters of the cut and a number of others. If the handling of plywood is not a one-time, short-term passion, then it is worth spending money on El / Lobzik. He is universal, and in the economy it is not useful, since, depending on the type of the appearance, it can "work" not only with a tree, but also with non-ferrous metals, plastics, org.

Some more complicated with the jigsaw manual. Its design is quite simple - frame with screw clamps and handle + pink.

The nuance is that the cutting canvases are quite easily broken (from excessive pressure, changes in the position of the hand tool), and therefore it is desirable to be purchased with a reserve; Fortunately, they are cheap.

Hacksaw

It is only needed at one stage - with a labeling sheet at a separate fragment. Doing so hand Lobzik - The occupation is low-job and unprofitable; Time and Pilot will spend a lot.

Stand

Nobody will keep the cutting plywood on weight; It's clear. Cut the details, putting a sheet on the table top - the risk to damage it. It is in order to ensure the "safety" of the latter, the stand and is needed. With your own hands, it can be made of a screaming board. What a fixture looks like (one of the options), visible in the picture.

Fixation of the stand based on clamps (on the non-working table) or self-drawing (in case there is a garage in the extension, shed, the garage carpentry workbench). Although this is not the only mounting options. How to do, it is easy to understand, confirming with local conditions.

Skar

An ideal tool for thin wood processing is. But for crafts from plywood, which are not distinguished by large areas, it does not fit. Therefore, only sandpaper; Middle-complete - for primary grinding of blanks and with small grain - for the finish.

Additionally

Files and Nadfili.
Awl.
Simple pencil and copied.
Adhesive, if the aircraft is created composite or multi-level, that is, with the fixation of two or more figure fragments in some sections.
Varnishes, paints, veil.

Examples of drawings and sketches of plywood crafts

Copy "one to one" in this case is unlikely to be advisable. Any work performed by your own hands is a process with a creative component. That is why the sizes should be determined independently, depending on where it is supposed to be placed (or how to use). For example, whether it will "look" in a particular place, whether it is organically fit into the interior of the room.

Even if the drawing liked and liked, it is easy to change the geometry of the figure, applying the scaling rules. Moreover, when it comes to drawing an outline on plywood simple pencil; Any error is fixed, in some sections, something is easy enough to correct. Not much more difficult and modifying any sketch, bringing something original to the sample, original.

There is a different solution - you can download any pictures from the Internet that you like. Print it on the right scale is not a problem. It will remain only with the help of a copy paper to transfer it to the phaneer and shade the plots that you need to cut. This is if it comes to the craft of figured. The contour sample is even easier; Remes exactly along the line - and everything is ready. It will only remain aware of the artistic design of the product.

Basic Rules Lobzik

Laying under a tight substrate sheet. It is in order to ensure the hardness of the surface under plywood, and the stand is used. The sheet, even small, is fairly easily (under pressure) bends, because without this adaptation of high-quality cut, strictly along the line, will not work.
The working body of the jigsaw (fender) must be strictly perpendicular to the leaf end. Moreover, throughout the entire process of cutting material.
The tool is supplied along the line of translational motion, but without effort. Otherwise, the pink will immediately break. As well as when it is deviated from the "vertical".
Drinking holes "Deaf", that is, somewhere on the sheet of plywood, with an indent from its edge, is made as follows. At any point of the outlined circuit, the "hole" is dried with a little displacement to the center of the fragment. The diameter is chosen such that the pedel has easily entered it. After its attachment on the frame of the tool, you can carry out in any convenient direction.
Figured drank in the plywood assumes sharp turns, smooth bends and so on. First, at the point of change in the direction of the jigsaw, without changing his position, it is necessary to do a small hole in the material. For this, the saw should be continued, strictly withstanding the orientation of the instrument, and at the same time turn a piece of plywood. As soon as the cutting part plane coincides with the required direction of further cutting, it can be guided by the planned line.

Having mastered the manufacture is enough simple crafts From plywood, you can take it for more complex options. As an example - independent assembly Furniture (racks, shelves, original hanging shelves). With a skillful approach to the case of plywood, excellent countertops are obtained, cutting boards, platbands on the windows and so on. From this material it is easy to make chair-"clamshell", and various modifications. Who is interested in this.

From plywood, excellent paintings for paintings are also obtained. Those who have a plot can be engaged in decorated construction articles; The same gazebo, a house above the well or something else. Variants are set. The main thing is to want to learn.

In the process of preparing for drinking, you do not need to forget that all drawings and drawings are nothing more than the basis for developing your project. A little fantasy, time, effort, and from plywood you can make a real masterpiece.

All photos from the article

Lovers of all kinds of needlework must be paid attention to this type of decorative and applied art, like cutting on plywood. This way you can make all sorts of figures, patterns and other decor elements.

Moreover, it is quite simple to master this technique, the only one, you must first get acquainted with its main nuances that we will do lower.

What is needed for cutting

First of all, consider which tool for this will need. Immediately it should be said that expensive equipment for cutting from plywood is not required. Therefore, everyone can do such work.

The only thing to prepare the following tool:

electrolovik;
electrode and Kollet;
scissors;
cardboard patterns;
nadfili.

In the photo - Manual Lobzik

In addition, you will need various consumables, such as the:

sandpaper, for grinding spike places;
tracing;
the pencils;
glue;
acrylic paints, etc.

In addition, it is necessary to prepare workplace. Since working with any wood materials It implies the presence of sawdust and unnecessary trimming, it is desirable to equip the workplace not in a residential room, but, for example, in the garage.

The workplace itself is a table. To it, it is desirable to attach a support for the jigsaw, which can be made from the plank. It is also necessary to provide good local lighting of the workplace.

Features cutting

Selection of material

As is known, plywood is a multi-layer material that consists of several layers of veneer. Thanks to this, it is great for creativity.

The only thing you need to choose the type of plywood. To do this, you need to pay attention to the following parameters:

Parameters	Optimal type of material
Thickness	For cutting with your own hands, you should not use too thick sheets, as it will complicate work. At the same time, the material must be strong enough. Therefore, the optimal thickness of the thickness is 8 mm.
Mark.	Mark says about the type of adhesive composition, which was used to glue the veneer. Such moments depend on it: material price; its moisture resistance; ecology. For the manufacture of decor, which will be used in the residential room, the eco-friendly brands of plywood should be used, for example, FC. If the product is made for outdoor use, it is necessary to use moisture-resistant sheets, such as FSF.
Variety	Determines the quality of the material, and therefore its appearance. Accordingly, for creativity, it is necessary to use the sheets of the highest varieties so that they do not have any visible defects.
Wood breed	For cutting are optimal option Plywood sheets from coniferous rockssince they are easy to succumb mechanical processingAnd at the same time possess an attractive texture. True, in cases where weakly generated texture is required, you can use the birch plywood.

What to cut

As a rule, people who are first faced with such work, are interested in - what can be cut from plywood?

There are a lot of options - it can be:

patterns for decorating furniture or other elements of the interior;
panel on the wall;
decorative inscriptions;
all sorts of figures, toys for children, etc.

Tip! Functional carved items, for example, caskets, candlesticks, coasters for napkins, lamps and much more can be made of plywood.

Of course, you should begin with cutting the simplest products to "fill the hand." After receiving experience, you can take care of the work of any complexity.

Cutting process

After preparing the workplace and materials, proceed directly to the carnation itself.

The instructions for performing this work looks like this:

first of all, you need to execute the image of the future product. You can make them alone, or find on the Internet and print. It must be said that the templates must be prepared even before cutting words from plywood with simple contours, as it will greatly simplify work and increase its quality.

You can also prepare simple templates in advance. geometric figures different sizesso that, for example, quickly cut a circle of plywood or square;

then the images should be transferred to cardboard, for example, using copy paper;
now you need to cut patterns from the cardboard;
next, the prepared patterns need to be located on the plywood sheet and circle a pencil. If the drawing is large enough, it can be fixed with scotch or even glue;
now proceed to discharge. If you need to cut beautifully the edge of plywood, giving it smooth forms, you can use the electric bike. More thin i. complex work, For example, small openwork patterns should be cut with manual jigsaw.

To perform internal cuts, you must first drill the hole. Depending on the subtlety of the work, it is possible to use an electric drill or koklet;

after completion of the drinking, it is necessary to handle the places of sleep with sandpaper. To adjust the lines, you can use the approplanes;
then the product must be pasted. If it consists of several parts, they must be glued, for example, PVA or carbon black glue.

Tip! Beginner masters are often interested in specialists - how to cut a smooth circle of plywood? In fact, there are no secrets in this operation, the main thing is to correctly apply a circle on the material using a template or circulation, and then carefully and slowly cut it with a logby.

This is completed on this process. Now the product can be decorated - paint paint, apply patterns by the delicate or simply open with varnish.

Tip! Word patterns for cutting from plywood can be prepared in a text editor, such as Word. This will allow you to choose the most suitable size and font.

Here, in fact, all the main nuances of this work.

Output

Superior to the jigsaw of plywood is a much simpler lesson than, for example, wood carving. Therefore, to achieve good results do not need years to master the skill. It is only necessary to perform work carefully, sticking to the above recommendations.

Video in this article contains additional information on voiced topic. If some points are not clear to you, you can leave your questions in the comments, and we will be happy to answer them.

When you need to cut something out of plywood, many people are interested in the question than to cut the Faneru? It is impossible to unambiguously answer this question, because for different purposes there are methods and tools. In this article we will talk about the most popular ways of cutting plywood.

Cutting plywood

This procedure is performed by several methods. The easiest and affordable is the use of manual knobs. However, since the plywood sheet is quite dense, even if you compare with a conventional spruce board, in order to cut the Paneur to spend a lot of strength. For this reason, this method is only suitable for thin sheets of plywood. A disk electrical saw can act as a replacement of manual hacksaw. In domestic conditions, this option is quite effective and makes it possible to cut both thin and thick sheets of plywood without much difficulty. Disadvantage this method You can call cut only in a straight line. For figure cut Such a tool turns out a lot of chips.

When it is necessary to carry out curly cutting from plywood in a large volume, it is worth paying attention to specialized equipment. Lasers and milling plants allow you to get a high-quality product.

Several tips:

drinking must be carried out only on a dry material. High level Humidity causes an increase in plywood resistance. As a result, during an excessive effort, a veneer may be laughed or break the pink
replace saw or cutting cloth It is necessary immediately after the detection of tatsev blunt signs
when cutting with an electrolovka to create clean and smooth ends, the main lines of the cut must be placed along the layout of the veneer fiber
ruju Lobzik is more convenient when working across the fibers. Although SCOLs are so much more, but at the same time the risk of clamping the pink and care is reduced away from the conducted line
when translating the pattern for cutting into the workpiece, you need to place a stencil so that the parts removed are located on areas with disadvantages, for example, bitch, chips.

Methods of figure cutting

The order of working with the pubsie:

first of all, you need to print drawings or stencils that are transferred to the workpiece using copy paper.
to create through areas it is necessary to make a thin drill starting holes
in the resulting holes inserted a carriage or leaf of the jigsaw, the free edge of which you need to fix with the help of a fastening screw or clamp
after that, it is carried out for the outlined lines. At this time, you need to tightly press the workpiece to the workbench
at the end of the drinking, you need to remove extra parts and process the finished object with a file or emery paper.

Creating a round hole on the milling:

the regular line, which is part of the milling unit, must be consolidated in the center of the circumference using self-press
if the line is not long enough, it is worth creating a simple bracket from metal profile Or wooden planks
with the help of rotation of the mill in a fixed radius, the groove is selected around the circle, as a result, it turns out almost perfectly smooth hole
during the calculation of the diameter of the circle, it is necessary to take into account the size of the working cutter. More accurate numbers are contained in the instructions for the device.

Such a device is great for cutting circles, as well as separate arcs - for example, to create grooves for furniture brackets. The milling machine is perfect for working with thick plywood sheets. The complex pattern does not cut in such a device, but the circle or arc is easily.

Decorative wooden panels These are a real classic, give a nobleness and are considered a sign of a great taste. Wall carved plywood panels are affordable and durable material to create a unique interior. Plywood sheet is the basis for applying a veneer from natural tree valuable types of wood, for example, oak, ash and others. Such products are distinguished by an attractive appearance, low cost, strength, flexibility and ease of processing. In addition, such material is resistant to the formation of chips and damage during the cutting patterns.

People who prefer to create decor objects personally can master artistic cutting skills. Wood is a material that allows you to create genre paintings and decorative compositions. Such products can be decorated with their own housing, and you can also give them familiar. Today wooden crafts At the peak of popularity. Tree thread lessons in large quantities Present on the Internet.

May 29

Of carved wood and plywood can make so many pieces of decor and useful little thingsWhat is stupid to limit the scope of application of work. In fact, it can be absolutely everything that fantasies is enough: boxes, covers for decorative and collectible books, lampshades, panels, shutters, elements of furniture, platbands, eaves ... But the most attractive in creating exclusive work is that each can perform Wishing if a certain amount of effort will attract.

Short wood carving: photos, drawings and sketches

The main key to success in creating interesting things with slit carvings is the choice of drawing. It is he who reports general concept And sets the aesthetic tone to the whole product.

The easiest most starting will perform geometric patterns, as in the photo.

Carved drawings of floral and animal theme - classic ornaments for any scope of application.

Inscription - modern option Applications of wood thread and plywood. At the same time, the drawings and sketches you are unlikely to be able to find on the net - they will have to be purely individually under personal requirements for sizes, fonts, words.

Stencils

However, unlike the slotted inscriptions on plywood drawings with plant, animal and fantasy themes can be found on the network. So feel free to choose your favorite stencils in the album, and the ideas for creativity are enough for a long time!

Self simple sketches suitable for training at the very beginning of the path of manufacturing products, and can become individual elements complex design. For example, this makes carved houses.

More complex patterns will require certain skills and patience, but the result is worth it. Such pictures can serve as an independent product, even a gift.

Whole compositions with the idea and meaning usually serve either a separate work or form the basis of the work.

Rubber Tools: Lobzik or Milling

However, the choice of drawing is only a third of success. Another important aspectwhich must be considered before proceeding to work itself. Namely - the choice of the tool to which wood carving or plywood will be made.

Depends on the equipment:

how thin will get a thread;
complexity of pictures;
cutting speed;
accuracy of work.

Therefore, it is important to evaluate all the pros, cons, possibilities and limitations of each of the traditional tools for drinking:

Lobzik - Device for figure cutting parts. Hand tool It is quite laborious to work, but it allows you to very accurately perform drinking according to the drawing. The power tool allows you to quickly produce curly products from plywood, but requires caution.

The mill is a tool, due to which the flat rubber slotted carving acquires a more subtle and completed look. It is with it that it turns out to round the edges, remove the chips, make seats, to carry out the most complex cutting.

Theoretically, the milling machine can be performed the same works as the jigsaw, and even more, but on the fact such an appeal with the tool is fraught with a rapid way out of order, frequent replacement of friezes.

Materials for rubber thread

In most cases, for such a type of work, they choose Paneur - it is evenly thin, it has a pleasant color and structure, it does not lead to further use or storage unlike the wood array. It is the choice of material becomes the third whale of successful work.

Modern market is abundant different species Materials, so easy and confused. For such work, you should choose:

plywood FC - harmless to humans and medium, durable, comfortable in cutting, practical;
plywood FB is also safe for a person, but a resistant to an aggressive environment, since special processing passes and gets protective coveringwhich is why it can cost an order of magnitude more.

Note! Do not choose internal work FSF class fane is treated with carcinogenic preservatives and allowed to use only on fresh air - They are perfectly facing the bath or house outside.

Stock Foto Carved wood houses

For Russia, a sloping carving is of particular importance as the finishing of buildings facades. Four ornaments cut out on Berrette and other similar materials are decorated with huts, baths, churches, which colorfully demonstrate photos.

Video milling on a tree with a manual milling

If you only decided to try your hand in figure slit thread, it will be worthwhile to watch a video with a master class. It will help better understand how drawings are created, and as such a house beauty appears.