How to use a furniture stapler: device, work, tips. Features of construction staplers: how to choose, how to fill with staples How to load a construction stapler with staples

Mechanical stapler allows you to nail plastic panels, clasps for lining, fabric for furniture, wooden or plastic surfaces.

There are three types of staplers: mechanical, electrical and pneumatic.

Mechanical staplers are affordable, compact, lightweight, and easy to maneuver. In the following, we will only talk about them.

How to choose a stapler?

In short, it is undesirable to buy the cheapest options, as well as plastic models. metal tool more powerful and more reliable.

choose professional models, which have an adjusting screw (lamb) at the top. It helps to regulate the force with which the tool will punch through the material.

Many people forget

Before working, adjust the adjusting screw according to the material of the surface to be worked on.

If it's a hard plywood, it will need a lot of punching through the material, so it's worth setting a lot of force. If it is a loose surface, the force must be reduced so as not to break through the fabric, or for example pvc panel which you shoot.

During operation, it is recommended to press the lever with one hand, and press the adjusting screw with the thumb of the other hand. Then the return will be minimal and the load will be distributed evenly in the stapler. You will be able to hammer in the brackets much better.

How to load staples into the receiver

The design of all mechanical hammers is almost the same. There is a handle-lever, due to which the pressure occurs, and at the bottom of the stapler there is a metal plate that opens the receiver. Here we have to load the brackets.

Before buying brackets at a hardware store, you need to find out what size is right for your machine.

How to fill a construction stapler

As a rule, the size and type of suitable staples are indicated on its body.

For example, on the body of our stapler, the width is 12 mm and the depth is 6-14 mm. This means that you will only be able to charge staples from that range.

Parentheses less or bigger size will not fit the receiver. The size of the staples in millimeters is also indicated on their packaging.

To fill the shells into the stapler, you need to open the metal plate on rear surface.

To do this, you need to take it with your thumb and forefinger on both sides, then pull it towards you and slightly down. Thus, we wring out the metal tab on the back of the plate, and pull out a metal spring, similar to the one in a regular stationery stapler.

If there are still staples left in your stapler, they will fall out after you pull out the spring. If they are not there, then it is time to put new ones for further work.

Staples are inserted into the receiver (hole in the position of the letter "P"). Next, we insert the spring back, closing the metal foot. That's it, the tool is loaded and ready to go!

How many shells will fit

Now a little about how many shells fit in the stapler. Staples are sold in small rows. The row can be divided into several parts independently, slightly breaking it with your hands.

1-1.5 rows are loaded into the tool. 2 rows rarely fit in the receiver, so if there is a lot of work to be done, it is better to prepare halves of the rows before starting work.

What to do if the bracket is stuck

It is worth noting another very important point which will help you in your work. It happens that the brackets are bent and stuck in the exit hole. They cannot be hammered into the surface and cannot be pulled out by hand.

In this case, we need to pull out the feed magazine completely.

This possibility exists for almost all professional staplers.

First you have to rediscover metal plate and pull out the spring.

In this way, you will pull out the entire feed magazine that was in the tool.

You will see a jammed bracket, which is now easy to pull out with your hands.

Assembling the stapler back is not difficult: the entire pulled out block returns to its place with a push. When you do this, you should hear a click. After that, do not forget to put the spring in place.

More than just brackets

Some staplers can work not only with staples, but also with carnations of various shapes. The designations with which the stapler works are indicated on its body or in the instructions.

Carnations are tucked into the stapler in the same way with staples, but you need to be careful after pulling out the spring. A number of carnations must be loaded along one of the outer faces of the letter "P", and not inside this very letter!

If you want it to give out two nails at once side by side when working with a stapler, the second row is loaded along the second outer edge. Next, the spring is inserted and the stapler closes.

A stapler is a universal thing. Always useful not only in professional but also at home. To nail insulation, cover the greenhouse with film, change the upholstery of furniture or fix the cable - the possibilities for application are wide. There are so many handguns on the market today, it's not always easy to know which one is the best. But it is important to understand this issue, because different types pistols are used in different ways. The device, the type of tool, the size of the staples - the head can go round.

Pistols can be divided into several groups:

mechanical;
electrical;
pneumatic.

The use of mechanical staplers

Usually in everyday life they use a simple mechanical device. In another way, it is called a construction stapler. If the tool is needed for a one-time use (upholstering a greenhouse), then it will be enough. It can be made of plastic or metal. Plastic is cheap, but breaks quickly. Metal is more reliable and a little more expensive. Which is more suitable, you need to decide for yourself.

What if the choice fell on a mechanical construction stapler? How to use? Very simple.

Tips for using a mechanical stapler:

Operation of electrical appliances

Most often, electric staplers for furniture are used for hauling interior items and for other large-scale repair work. They differ from mechanical ones in more massive charges. Their service life is longer. And electric ones are easier to use. Such a stapler for furniture is several times more expensive than mechanical models.

Often people ask a question about a stapler for furniture. How to choose? There are many options here. Electric staplers differ in the following parameters:

How to insert staples into furniture stapler powered by electricity? The scheme is simple. It is enough to find a button on the back of the pistol and pull out the sliding bar. Then load the staples with the ends down and push the chute. It is important to observe safety precautions.

Pneumatic construction staplers

Differences from mechanical and electrical devices:

Staplers are useless without staples. And the "cartridges" differ in many ways. Manufacturers themselves produce all kinds of shells for staplers.

Material:

Degree of hardness:

Simple - suitable for working with malleable materials.
Solid - used to interact with dense materials made of plastic and wood.
Hardened - for the most stubborn surfaces.

An important point will be sharpening the ends of the staples. Sharp? Much easier to kill.

Flat - the most popular types of staples, their choice is very large.
Semicircular - more often used to secure the cable.
Pins (similar to the letter "T") are used to hide fasteners. The most inconspicuous.

Each stapler has its own type of staples. The marking is indicated on the pistol box or on the body. It is important to use only staples that match the markings, otherwise the device will work by firing at several fasteners or not work at all.

What to do if the gun does not issue staples:

Safe Working Technique

Using a mechanical stapler.

By following the safety rules when using the device, you will avoid unnecessary injury. And the device will last longer:

When working with an electric or pneumatic stapler, you must follow the safety rules described for mechanical tool. More important:

Getting along with mechanical, electric or pneumatic staplers is easy. But it is important to use the tool correctly. You need to charge it with fasteners with the marking that is indicated for your model. And also it is necessary to adjust the mechanism for the desired force of driving staples. The main thing: follow the safety rules when using. Careful handling and accuracy in use is the key to productive work with any stapler.

To nail a film, lining or vapor barrier to the cladding, chipboard or upholstery to furniture - all these tasks will help to carry out a construction stapler. This device also called a stapler, staple gun, staple gun, nailer, or tacker. In this article, we will talk about what types of staplers there are, how to choose them correctly, and also how to insert staples into a furniture stapler.

Types of staplers

First you need to decide what type of stapler you need. According to the type of driving force, these devices are.

Mechanical

Operated by hand power, have a small capacity, not large quantity staples that can be “filled” into it. Working with hard materials this tool is quite complex - you have to make considerable efforts.

However, mechanical tackers are relatively small and light, which makes it possible to work in uncomfortable positions. In addition, many are attracted by their low price, although there are models with a fairly high price tag.

Electrical

In such tools, the bracket flies out after the trigger is pressed, but the mechanism is powered by electricity. There are models that run on batteries, there are - from the network.

Of course, the performance of such staplers is much higher than that of mechanical ones, but their prices are much higher, especially for battery types. The dimensions are also larger.

Important! For models that operate from the network, the cord may interfere with work, and for battery types the bulky handle and weight are inconvenient. But physical effort is kept to a minimum.

Pneumatic

Here driving force is an compressed air, under the influence of which nails or staples fly out of the store. Such devices have high performance and quite big store- you can immediately fill the furniture stapler with a large amount of consumables.

However, the disadvantage of pneumatic models is that they work from a compressor, which makes a very loud noise. It is very difficult to move around with such a unit, so this type of tacker is more appropriate for professional use in a particular place.

Important! If you need a construction stapler only for one-time work - only during the construction or finishing of a house, then it is better to choose a mechanical or electric model.

Household and professional

Like all other tools, construction tackers are conditionally divided into household and professional ones. The difference in cost is significant - at times. And this is justified, because the point is in the functionality, the number of operating modes, settings and in the working resource:

In household models, a small working resource, since they are mainly made of plastic.
Professional tools are made of steel, often of stainless steel. They contain plastic elements, but, as a rule, these are metal overlays on the handle to soften the recoil.

Important! There is also an intermediate class - semi-professional. They fall between these two categories in terms of quality and price. Often it is in this group that it is better to look for a tool for use at home. It works well and is relatively inexpensive.

Staples for a stapler: types and choices

Each stapler works with a specific fastener. Therefore, in addition to knowing how to fill a furniture stapler, you also need to have an idea what consumable can be used for this. When you go shopping for staples, you need to know the type, or at least the dimensions.

Staples for tackers are made from the following materials:

Aluminum - a good choice for working with soft surfaces such as pine, but they are not suitable for harder surfaces, as they will crumple.
Copper is a rather expensive option that is used in rooms with high humidity. Also used on soft surfaces.
Steel - a budget option which can be used on harder surfaces. However, their disadvantage is that they rust.
Stainless steel and galvanized are excellent choices, but quite pricey. But the fasteners are reliable, for any conditions.

Important! In addition to dimensions (back width and leg length) and material, it is also necessary to pay attention to whether there is sharpening or not. For softer surfaces, this is not so important, but when working with harder ones, it can be a decisive moment: sharpened types go into plastic and dense boards much easier.

How to fill?

A construction stapler shop can be of two types. The tool is more convenient to use when the store opens. Then inserting staples into a construction stapler is as easy as into a clerical stapler:

Pull back the spring.
Insert a block of staples into the magazine.
Release the spring.

Important! During operation, a stuck bracket can be removed at any time, correct the block and continue working.

In the event that the stapler model is with a retractable magazine, it is also easy to put the staples:

Release the latch.
Extend the spring.
Insert the block of staples.
Return the spring to its place, fixing it in the damper.

Important! With a similar structure, removing a staple that is stuck can be quite difficult. You will have to pick it out of the striker, and this can be dangerous - the trigger mechanism must be blocked in this case.

Using a stapler, without any nails, you can fasten materials of small width and density. It is an indispensable tool in the office, construction and furniture industries. In the article we will figure out how to insert paper clips into the stapler.

Stationery staplers

These tools are very simple and designed for the average average person who is not versed in technical "troubles". Everything is simple here. You flip the top cover - and the spring with the clamping mechanism has moved back. Insert a clip of paper clips with the tips down and close the lid. The clamping mechanism returns to its place, and the tool is ready for work again.

Those who wish can watch a video in which the boy shows how it is done correctly.

Construction staplers

They are more massive and have a slightly different structure, although the principle of operation is the same. The spring clamping mechanism pushes the clip clip to the shock, after each operation the next clip takes its starting position and as a result of pressing the spring key, the shock mechanism drives it into the right place, thereby pressing the next sheet of cardboard against the wall with the clip, the material against the wood from which the frame is made upholstered furniture, or just for the formwork of the future concrete foundation. Let's figure out how to insert paper clips into a construction stapler.

Wrong option

The mistake of many is that when the stapler runs out of staples, they, having pulled back the double-sided protrusions of the frame lock, open it and try to insert the next clip of staples through the front part from the side of the impact mechanism. As a result, with an awkward movement, the spring mechanism now and then throws the clip back, and it flies away for many meters, after which it has to be searched for a long time. Often, a clip can also fly into the eye of an unlucky "stapler operator." Here is a video that shows how not to do it, although the operator himself does not suspect it.

Correct option

The right way How to insert staples into a stapler of a construction or furniture variety is to, by pressing on the back of the spring-loaded staple feed holder, release its groove from the lock hole and pull it out completely. After that, you can even insert more than one clip into the frame and return the spring of the mechanism to its place, thereby ensuring its smooth operation for a long time. Here is a video on how to do it right.

The frame should be opened as in the first, incorrect case only when one of the staples gets stuck in the exit slot.

We hope our article was useful to you. Happy reloading!

Not sure how to properly refill a large stationery or mini stapler? Read the article, which describes this process in detail.

A stationery stapler is a stapler for paper and files. You can't do without it either at home or in the office.

To use it, you need staples, without which the stapler will not work.
Staples are divided into sizes: No. 10, 26/8, 26/6, 24/8, 24/6. Their numbers are indicated on the packaging.
On the packaging of the stapler itself, the numbers of the staples that fit it are indicated.
It seems that everything is simple - insert brackets right size into the stapler and you can start using.
But many people have problems in order to charge this device. How to do it right, read the article below.

So, you bought staples and want to charge your stapler. How to open and fill a large stapler staples? Description in the form of instructions:

Peel back the stapler's plastic cover that is held on by a spring. Opening the roof pulls the spring along with it. The freed space is the groove for the staples. Many large staplers have latches that need to be pushed back.
Take the braces- one section. Insert them into the groove, the ends should look down.
Close the stapler cover.
Click once with no paper. If a paperclip with bent darts falls out, then the stapler is working.

Advice: If the dropped staple is bent incorrectly or it does not fall out at all, then repeat the procedure or buy another stapler, it may be a malfunction.

You can watch the video to learn how to properly thread the stapler. A visual demonstration will help you cope with this process quickly and without problems. In addition, the video tells how to fix the stapler.

Video: how to fix the stapler and charge the stapler?

Mini staplers are easier to refill than larger similar devices. Lift the plastic cover up and back. Now you can insert the staples into the groove. After finishing the filling process, close the stapler and use.

Advice: Mini staplers have a very small compartment for staples. Therefore, if you want to get old staples or insert new ones, then you will need tweezers.

Often the mini stapler can jam during filling. To fix this, open the cover and adjust the staples in the groove. If this is not done, then the stapler may become unusable. Watch the video on how to properly fill the mini stapler.