Vibrationstavka - element of the pipeline system required to compensate for displacements different parts Pipeline systems arising from their work, such as mechanical, thermal or assembly. You can choose and order in the site directory.

Rubbing flange vibration It is also used to prevent transmission of all kinds of mechanical vibrations in separate parts of the pipelines. It can be successfully used as compensators in cases of any kind of temperature, linear or corner deformations.

In case of connecting to the pump pipeline, compressor, ventilation unit or any other device, the vibration, installed before or for these devices, significantly reduce the level of vibration and noise in the pipeline that can arise in these cases.

Scope of this item pipe fittings Unusually wide. Vibration Installed almost everywhere where there is a pipeline system - in air conditioning and compressor installations, pumping stations. They are also used to facilitate working conditions for mounting and disassembling valves, without them it is simply impossible to do with suction and pressure pipelines of pumping or compressor installations.

In domestic conditions, they are widespread in hot and cold water supply networks, in heating systems, as well as in sewer pipelines. To facilitate specific working conditions that can occur during the operation of the pipeline, the selection of inserts is made by choosing from several species that are produced for each conditional diameter of the pipeline.

For example, installing a disk shutter instead of a valve, to compensate for differences in the size of the valve and the shutter, is widely used flange vibrationwhich is installed consistently with the shutter. At the same time, the process of installation of the shutter itself is substantially facilitated.

Shut-off valves for pipes.

Rotary shutters - the desired detail of the Great Process!

Shut-off valves industrial and general Used in many areas of human activity - chemical, pharmaceutical, shipbuilding and many others. Armature is one of the main engines of many important technological processes. Rotary gate - The desired part of this engine.

Such a shutter and locks, and regulates. It is an essential element of the pipeline, any oil pipelines. The main part Rotary shutter is a turning disk that can be different materials, as a rule, from of stainless steel or cast iron.

Shut-off valve from Elavis-Zenner

Scope of business interests Elawis company Extremely multifaceted - in addition to the successful implementation on the market of our country a variety of instruments accounting and resource consumption (mainly water and heat) of a variety of constructive performances, LLC "Elavis" is always happy to offer a rich choice to its potential clients various elements shut-off, pipe fittings itself high Qualitymanufactured in Slovakia under the brand "VITECH".

Vibrocomponentials (vibration) refer to the auxiliary pipe fittings. The main purpose is to absorb the vibrations created by other equipment in the system: pumps, compressors. Also apply to compensate for thermal expansion of pipes and side, angular displacement within values, permissible design a specific rubber compensator (depending on the diameter - up to 22 mm side and 45 ° corner displacement). Help to reduce the noise from the work of equipment that creates vibration, protect against hydrowards. Their work is significantly prolonged by the service life of the pipeline system, so in obligatory Installed after equipment that creates vibration. The transverse and longitudinal displacement and stretching of the plots of highways. Installed next to the equipment creating large vibrations.

Anti-Vibration Flexible Insert Design

The standard vibrator computers consists of the following parts:

• rubber sleeve or body;
• fastening to the pipeline system (2 flanges or threaded fittings);
• reinforcing cord.

What materials are made by the vibrocomponentials

Of course, different manufacturers can offer different execution of this equipment. We will tell what materials are used in the manufacture of our anti-vibration inserts.

• Flanges / Threaded Connections: Carbon Steel.
• Reinforcing Cord: Carbon Steel.
• Case: EPDM (rubber).
• In the vibrocomponents of Rushwork and also uses an internal filler - nylon cord.

The maximum temperature of the working medium can depends on the case of the case, which the vibrating station can pass. As a rule, it is from -20 to + 105-110 ° C. Vibrations are used for hot and cold waterAlso they can be used when transporting air. For gases, vibrations with sleeves made from MBR are usually used.

Video: Vibrating compensator in action

Buy the vibrocompators in bulk and retail you can in the company "RU100"

We always have pipeline equipment for damping vibration in the pipeline, including the vibration from the Spanish manufacturer Genebre and Russian Rushwork. We will pick up suitable equipment specifically under your system. We work directly with suppliers, we have our own warehouse, so prices remain low. Reliable supplier Pipe fittings are us!

• Our engineers work in the industry since 2008. We know that we sell, and with pleasure we will help you choose the desired model.
• We deliver your order in Russia! Either possible self-delivery from our

The Catalog of TECOFI products is the largest European pipeline reinforcement company, is represented by metal compensators and elastomer compensators, which protect the pipeline from deformations during vibrations and temperature effects. Noise absorbing and vibrating capacity provides an elastomer from which the case of this model of the TECOFI compensator is made. Elastomer - elastic material with highly elastic properties. EPDM beam used as a sealing and sensitive element, has a high wear resistance to thermal and mechanical effects, which ensures reliable operation Throughout the service life. The design of the bellows allows the compensator to be changed under the action of longitudinal, transverse and angular bends. Interior reinforcement Made of steel. Compound with pipeline - flange, flanges are made of galvanized carbon steel. The product resource is at least 100 thousand open-closing cycles. Compensator Anti-Vibration Tecofi is represented by various sizes.

Vibrating TECOFI

For the full operation of pipeline systems, along with compensators, anti-vibration inserts are used, which reduce vibration and various noise. Vibrating TECOFI It consists of special rubber, which has high heat-resistant qualities. Ability to interact with such working environments as compressed air, Water in the temperature range from -10 ° C to + 110 ° C is ensured by the elasticity and strength of the material. TECOFI Vibrating Station can also act as a compensator of various shifts when the pipe system is violated, thereby providing additional protection to the compensator.

Installation instructions and installation of a flexible insert Abra-EJF-10 - rubber anti-vibration compensator

1. Mandatory to fulfill ""
2. It is necessary to strictly follow the parameters specified in the tables above, reasonably apply control rods.
3. !!! When installed rubber compensators Abra In the pipeline system, additional seals are prohibited in the form of elastic interflabsey gaskets, a reliable hermetic compound is provided by the rubber protrusion of the Abra vibrocompressor itself.
4. Flexible inserts should be installed directly behind the fixed support. A flexible insertion should provide movable supports.



5. It is preferable to use the collar flanges, although in the presence of the necessary qualification of the installers and the installation of flexible Abra inserts is possible and between flat flanges. Do not forget at the same time to clean the inner welds from the burrs in order to avoid damage to rubber.
6. It is unwanted to install the viberompensor closer than 1.5 diameters of the pipeline from the suspending devices.
7. The maximum allowable tightening moments of bolts for flexible inserts (vibrarocomponnets) of any manufacturers must be monitored by applying dynamometric keys. In particular, for ABRA inserts to DU80, the maximum torque is 60 N * M, and for large doors is 80 N * m.
8. Flexible vibrator inserts can be mounted in any spatial position.
9. It is not allowed to use a compensator as a reference structure, that is, the installation of the compensator must be performed after fixing the pipelines. Pipelines with both ends of flexible inserts must be fixed in fixed supports quite close enough so that the operating range of pipe offset is out of the limits allowed to insert.
10. It is not recommended that the preliminary compression of the compensator for installation exceeds 3 - 5 mm. Stretching inserts during installation is unacceptable.
11. It is not allowed twisting a flexible element of the compensator when installing.
12. Before starting the installation, it is necessary to centen the substantive and reducing pipelines by fixing them at a distance of no more than three diameters of the pipeline from the compensator.
13. Neither the anti-virus compensator nor the control rods are intended to compensate for the error in the installation of the pipeline, such as the shift in the center of the flanges.
14. Damage to the compensator is not allowed sharp edges Pipes or surface of the connecting flange.
15. The contact of the bolts, nuts or spills with rubber is not allowed (for example, when connecting a bolt nut - nuts are installed on the side of the opposite rubber elements - on the side of the pipeline).
16. The simultaneous work of the compensator for stretching and shift is not allowed.
17. The insertion of the insertion is not allowed when installing at the entrance of the pump or when working under vacuum (negative instrument pressure).
18. Welding work is not allowed in close proximity to the compensator insert without its protection or dismantling.
19. It is not allowed to stain in the flexible element of the compensator insert or the coating of its insulation layer
20. Storing compensator inserts is carried out in an unloaded state in a dry cool place.
21. Storage and transportation should be carried out without shock loads at temperatures: -40 ... + 65 ° C.
22. The estimated life of rubber compensators is 3 years.
23. Warranty obligations.
    The warranty period in compliance with the consumer of transportation, storage, installation and operation rules is set 12 months from the date of commissioning, but not more than 18 months from the date of sale. All issues related to warranty liabilities provide a seller enterprise.