Before buy Products from section Sensonic heat meters (ISTA)Please read with technical characteristics equipment. If the information was not enough, inform our specialists about this on the phones specified on the site, e-mail or through an online consultant. The price on the site is indicated with VAT. If necessary, we will arrange delivery in Russia.

With a fullest assortment of our products, you can read by clicking on the link - heat meters. Or use the navigation menu on the left.

A series of new generation heat meters "Sensonic II" Designed for use, as a rule, in small systems Hot water supply and heating offices, apartments, buildings and premises with a small heated area and maximum heatedness not more than 95 degrees.

Sensonic II heat meter

There are two versions of such heat meters: compact, modular.

Both instruments guarantee high accuracy, long service life, a large collection of information, flexibility in application and a long service life.

Instruments are equipped worish counter water (multi-line), modern electronics, thanks to which is carried out electronic registration Impeller, which guarantees stability and accuracy.

The compact and modular version differ only on the execution of the housing and the sensor cable length. Nominal consumption is the same (0.6 / 1.5 / 2.5 m3 / h). Every 30 seconds. There is a measurement of the temperature difference (between the feed and return pipe). Last readings are saved automatically. The meter data can be read from both the display itself and remotely. For this type of reading, two data acquisition systems are possible: M-Buster system (device with a built-in M-BUSMOULOM calculator); and radio system (for this you can use any modifications of heat meter meters, you can also any counter "Sensonic II" assembled earlier to equip blocks for radiocouping,)

The heat meters "Sensonic II" have a number of advantages: they are easy to use, using microprocessor technology, simplicity when installing and replaced, battery powered (service life of 10 years), corrosion resistance and wear, complies with standards and has a certificate. Country of origin Germany.

Heat meters "SensonicII.»There are 2 species: compact and combinational.

Compact execution is ideal for taking into account heat in the office apartment, a small room.

In the case there is a flow meter (pioneer, multi-line), electronic calculator (with autonomous power) and a temperature sensor. The second temperature sensor connects to the instrument of a flexible cable (length to 3m)

The accuracy of measurement of thermal energy consumption is very high, thanks to electronic calculators consisting of modern and highly reliable components.

The advantage of such a Sensonic meter is his small cost and its size. Thanks to its compactness, the Sensonic counter can be installed in places limited in size (for example, in shields). Easy to install and maintain. Reliable.

The combination execution consists of a calculator to which 2 removes are connected. temperature sensor and the wing or turbine flow meter with a pulsed output. There are special inputs for connectivity.

With this solution, you can connect flow meters different sizes Both types, respectively, the device can be used to account for heat in systems with expenditure from 0.6 m3 / hour to 250 m3 / hour.

The heat meter calculator has high speed, protection against water splashes and dust, and the calculator of this counter has autonomous power, carried out from the battery (built-in).

For everyday commercial accounting, the manufacturer offers Sensonic II in a compact and combined form, the main differences are their execution: the first is made in the form of a monoblock, and the second is equipped with a remote calculator. In addition, the flow meter combined device It can be completed with a wing or turbine flow meter.

The Sensonic II heat meter from ISTA has a multi-aged flow meter of the impeller. The single unit also includes an electronic calculator and two thermocouples, one of which is directly embedded in the accounting device, and the second is remote. Depending on the technical conditions of the heating system and layout features, you can choose a model for installation both for feed and reverse.

The reliability of the device is guaranteed by application qualitative materials For the working parts and the hull itself: the impeller is made of solid alloys, and brass is used for the housing.

The instrument calculator functions in offline mode Thanks to the power supply supplied from the built-in battery, which can reach 10 years. At the same time, the operational resource of the heat meter itself is 12 years, and the intermediate interval is 4 years.

The installation of the ISTA Sensonic II heat meter in compact design is allowed to horizontal and vertical pipelines. For a combined device with a turbine flow meter there is a limit - it is intended only for horizontal pipes, and the condition of the direct portion must be observed before and after the device, the length of which is at least 5 diameter of the conditional passage of the flow meter.

Cold Counters I. hot water Foreign Domaqua M, Mr. (hereinafter - counters) are designed to measure the volume of cold and hot water flowing through the pipeline.

Description

The counters consist of a housing, in the flow part of which, under the action of water flow, the impeller rotates, and the countable device, the gear mechanism of which is associated with the impeller through the worm pair or magnetic coupling. The principle of action of meters is based on measuring the number of irrigation of the impeller. The flow of water is shown through the filter of the inlet nozzle of the meter body into the measuring cavity, where the impeller rotates, and enters the outlet nozzle. The number of irrigation of the impeller is proportional to the volume of water. The rotation of the impeller through a worm pair or a magnetic clutch is transmitted by a gear mechanism. The scaling reducer of the counting mechanism gives the number of irrigation of the impeller to the value of the volume of flowing water in M \u200b\u200b3.

Counters can be equipped with a pulse module, M-BUS module, radio module.

Photo of general view

Specifications

The diameter of the conditional passage, mm
G Orizorontal installation class in
Transitional consumption qt, m3 / h
Sensitivity threshold, m3 / h
Vertical installation class A
Minimum consumption q min, m3 / h
Nominal flow Q NOM, M3 / h
Maximum flow rate Q max, m3 / h
Transitional consumption qt, m3 / h
Sensitivity threshold, m3 / h
Pressure Delta with Q NOM, MPa
The temperature of the work environment, ° C
Hot water
Cold water
Countability of the counting mechanism, m3
R abacy dimensions, no more, mm
Mass, no more, kg

Type approval sign

applied to the case of the meter and on the title page of manual manual.

Completeness

Verification

Main calibration equipment:

Testing flows with a flow range from 0.01 to 30 m / h, with an error of no more than ± 0.6%

Information about measurement methods

the "Cold and Hot Water Counters of Cold and Hot Ward" Domaqua M, Mr. Manual".

Regulatory and technical documents that establish the requirements for cold and hot water meters with puffed Domaqua M, Mt

1.Gost R 52931-2008 "Control and regulation devices technological processes. General specifications. "

2. GOST R 50601-93 "Counters drinking water Worched. General specifications. "

3. GOST R 50193.1-92 "Measurement of water flow in closed channels. Cold drinking water counters. Technical requirements".

5. Technical documentation of the manufacturer.

Experts will check the work on the construction of the building of the Children's Polyclinic No. 71 in the northeast of the capital, said Oleg Antosenko, Chairman of the MoscowNadzor. Polyclinic for 320 visits to shift is built on ul. Academician Komarova, Vl. 1-3 in the Marfino area. "Specialists of the MOSGOSSTROYADZOR together with the specialists of the Center Expertise will check the quality of access roads and soils used in UAV ...

In Chelyabinsk launched a new line of stone cotton plant worth 400 million rubles

In the Chelyabinsk "Tekhno Plant" (enters the structure of the TEKHNONIKOL) launched a line for the production of rolled technical insulation based on stone wati. The company has already begun to industrial production of new products - more than 50 types of mats produced according to GOST and technical conditions (TU). It is expected that the line will become one of the most productive and modern in Russia in the segment of technical ...

The market of new buildings of Moscow has grown in four months by 20%

27.3 thousand contracts of equity participation (DTA) are registered in the residential real estate market for four months of 2019, the Rosreestra management was reported in Moscow. This is 20% more than in the same period last year. In April, 7.5 thousand DDDs at housing concluded in the capital, exceeding the results of last year's April 23%, RIA real estate reports. The number of DDU registrations in the non-residential foundation has grown ...

How to make money on commercial real estate, or why did the finished rental business become a hit?

One of the most promising areas of investment in commercial real estate is a ready-made lease business (Gable), the yield of which reaches 18%. Middle time Payback - 8 years. The average amount of entry into the Hab begins from 8-10 million rubles, when attracting a mortgage loan - from 4 million rubles. . Since the profitability of commercial premises for rent you ...

Multifunctional spectacular center "Amphion" can accommodate 12,000 spectators

Amphion is a multifunctional spectacular center, which will become the most technological and modern platform in Moscow and one of the most striking objects near the developing IC "Skolkovo". Opening is planned in 2020. The project of the concert hall "Amphion" is the result of the collaboration of companies "Corporation A.N.D." (Included in Safmar PFG) and ANSCHUTZ ENTERTINMENT GROUP (AEG). AEG (a ...

About 80 commercial facilities ranging from 50 to 700 square metersAround the first floors of Moscow new buildings are set on electronic auctions. The organizer of the Bunda is the Department of the City of Moscow on Competitive Policy. Moscow entrepreneurs actively master spaces in different parts of the city, said the deputy mayor of Moscow on economic politics and property-far ...

In the company "Teplofok" you can order radiator counters (Distributors) heat. We are pleased to offer products of the famous IndiV brand, as well as all the necessary components for it on favorable terms.

The relevance of the use of the presented models

Individual care of heat saves thermal energy And pay for it in accordance with actual consumption. In the vertical wiring systems, radiator distributors meters are used.

The models presented in our range correspond to all established requirements and have an intermediate interval of 10 years.

The main models of heat distributors

1. Versions of Indiv-3 and Indiv-3R. These distributors have one built-in temperature sensor. Such devices use the principle of accumulation of the resultant response in time at a speed, which is determined by the output signal of the built-in sensor.
2. Versions of indiv-3r2 and indiv-3rd. These models have 2 temperature sensors (surface heating device and ambient air). In the IndiV-3R2 distributor, both sensors are built into the case. In the NDIV-3RD device, the air temperature sensor is embedded, and the surface sensor of the heating device is remote.

All types of distributors allow you to enter into memory and display the resultant reading on a predefined day of the year. Devices are used in internal systems Heating.

Any distributor can be installed on:

1. Sectional radiator made of cast steel or cast iron.
2. Aluminum battery Heating.
3. Tubular I. panel radiators.
4. Pipe registers.
5. Convectors.

The heat distributor solves the following tasks:

1. Accumulation of consumption readings.
2. Indication of consumption testimony for the previous year.
3. Display checksum indication.

In addition, the distributor is equipped with a self-test system.

Technical characteristics of INDIV-3:

1. Range of calculated temperatures in heat supply systems: 55-105 degrees Celsius.
2. Starting point of reference: June-August: 40 degrees Celsius, September-May: 30 degrees Celsius.
3. Nutrition of heat distributors: lithium battery.
4. Dimensions: 40x76x25 mm.
5. The accuracy of the measurement of the distributor: corresponds to the European standard EN834.

Advantages of the order of heat distributor counters in our company

1. A wide range of models. You can order the Distributor of the Teplakak of the previous and last generation.
2. Optimum cost. You can order any distributor model by favorable price with discount. Wholesale and regular customers, we suggest participation in special promotions.
3. Help when choosing. Our specialists are ready to tell about all heat distributors, answer your questions.
4. Sufficient warehouse stock products. You can order with us heat distributors in any required quantity Without long expectation of supplies from the manufacturer.
5. Operational delivery. You can start using any distributor in the near future. Transportation of heatpety meters is carried out by the company's own transport in Moscow and to the regions.

Contact! Control heat in modern format and reduce costs.

Code number	Description	Price (euro)	Sketch
088H2330.	Radiator distributor in compact execution Indiv-5 with visual reading readings with LCD Display	30,83
088H2203.	Radiator Radiator Counter in Compact Performance Indiv-3R with Remote Wireless Data Transmission (Radio)	43,39

Radiator Counter-Dispenser Indiv New Generation

Code number	Description	Price (euro)	Sketch
187F0001.	Radiator Radiator Counter in Compact Performance with LCD Display Changes Indiv-5	43,39

Code number	Description	Price (euro)	Sketch
088H2250.	Pulse adapter two-channel Indiv Pad for connecting 2 meters (water, electricity, gas) with pulse output	74,79
088H2251	Network node, standard with independent NNB-STD power	306,28
088H2257.	Network node with communication module for remote reading with GSM-GSM interface NNV-GSM (Networking)	1595,22
088H2254.	Network assembly with communication module for remote reading with RS232 interface NNV-232 (network)	459,42
088H2256	Network node with communication module for remote reading with Ethernet interface NNV-IP (Network)	1512,26

Accessories for setting the radio system and reading readings

Radio Software

Code number	Description	Price (euro)
	Parametrization program for INDMET meters
	Program for reading data from Indread meters
	INDSERV service program for setting up and reading data from an Indiv AMR system
	Parametrization program for the Indcomm main network node, including connecting cable

Set for mounting the distributor counter on cast iron sectional radiators

Clearance between sections no more than 34 mm

Code number	Description	Price (euro)	Sketch
088H2211		1,32
088H2230.	T-shaped nut, 65 mm	0,85
	Bolt m 4 x 35 mm
Cost of the kit

Clearance between sections of more than 34 mm

Code number	Description	Price (euro)	Sketch
088H2212.	Thermal adapter, standard, 55 mm	1,32
088H2230.	T-shaped nut, 65 mm	0,85
	Bolt m 4 x 35 mm
Cost of the kit

Set for mounting the distributor counter on panel radiators

Code number	Description	Price (euro)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut M 3 x 6 mm (required to order 2 pcs. On 1 counter)
	3 x 10 mm welded bolt (required 2 pcs. On 1 counter)
Cost of the kit

Set for mounting the distributor counter to convectors

Installation on "Ortems" ("Universal" convectors, Santekhprom-Auto, KV)

Code number	Description	Price (euro)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2270.	Rod rod m 3 x 330 mm	2,81
	Crown nut M 3 mm (required to order 2 pcs. On 1 counter)
Cost of the kit

Installation on "Kalach" (Convectors "Accord", "Comfort", "Progress")

Code number	Description	Price (euro)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut M 3 x 6 mm (required 2 pcs. On 1 counter)
	Welded bolt m 3 x 10 mm (required 2 pcs. On 1 counter)
Cost of the kit

Set for mounting the distributor counter on tubular radiators

Code number	Description	Price (euro)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2241. or 088H2242.	T-shaped nut, 36 mm or 45 mm	6,96
	Bolt m 4 x 35 mm
Cost of the kit

Set for mounting the distributor meter on aluminum radiators

Clearance between sections not more than 4 mm

Code number	Description	Price (euro)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Self-tapping bolt with 4.2 x 25 mm (required 2 pcs. On 1 counter)
Cost of the kit

Clearance between sections of more than 4 mm

Code number	Description	Price (euro)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Square Studs (required to order 2 pcs. On 1 counter)
	Screw m 3 x 25 mm (required 2 pcs. On 1 counter)
Cost of the kit

Optional equipment

Code number	Description	Price (euro)