Power connection

The wire GND. The blocking module must be connected to the car body or conductor, reliably connecting with the body. This wire is connected in the first place.

When installing, you need to consider the following connection feature: the power module must receive by output Bat., moreover, it should not disappear under any circumstances. Ignoring this requirement can lead to immobilizer failures - for example, an emergency activation of the anti-theft function, which can cause a sudden change in the engine operation. On the line IGN. Must be the potential of +12 V during the inclusion of ignition and engine operation.

When connected wire Bat.it must be remembered that the maximum consumption current can reach 30 A (at the time of issuing a pulse to control locks).

Connecting to a blocked chain

Wires No., NC. and Com. Connect to a blocked chain.

To carry out locks, you can use how normally closed ( Com. and NC.) So normally open ( Com. and No.) contacts.

The restriction of the relay occurs only at the moment of locking the engine. Turning off the ignition does not lead to the relay response.

The switching current must be no higher than 10 and long and not more than 20 A with durability up to 1 minute (when switching circuits without inductive component in the load). The dimensions of the blocking module allow you to set it in close proximity to the location location. When installing this chain, it is necessary to monitor the length and cross section of the wires used in switching, since the switched current can be significant. If the current in the locking chain exceeds 10 A, it is necessary to use an additional external relay.

Connecting Castle Management Outputs

Outputs Unlock and Lock Designed to control the hood lock or central door lock. Outputs are constructed according to the power scheme (maximum output current 20 a), so additional power modules are required to manage locks. At the same time, the control of door locks can be implemented both through two-wire drivers of the locking system and when directly connected to the central locking system with negative control.

The wire Input You must connect to the appropriate limit switch, this will allow the system to track the condition of the doors or the hood. If the door or hood is open, locking the lock is not performed. On this wire there must be a mass (-) with an open hood (doors).

Method of Management Castle		Output	Impulse "Open"	Impulse "Close"
Hood control ( disabledmode " Free hands")		Unlock
		Lock	–	+
Doom control ( switched on"Free Hands" mode) (only for i95, i95 LUX)	Central locking system with negative control	Unlock
		Lock	break	–
	Two-wire locking system drives	Unlock
		Lock	–	+

Before connecting the power outputs of the lock, select the appropriate control circuit.

I95, i95 lux

If the immobilizer control outputs are connected directly to the door lock control unit before Choose as a control system of central locking with a negative control. Non-compliance this rule May lead to the exit of the equipment failure.

After the connection, be sure to check the operation of the unlocking and locking algorithm to the Immobilizer and the car key. In rare cases, an incorrect operation of the CH, associated with a feature of the standard car chains, use an additional external relay with dry contacts to connect to the TZZ control inputs.

In the event of a malfunction in the lock control circuit (for example, a short circuit of wires or overheating), when Issuing a pulse to open or closes the lock, 2 short beeps will be called. In this case, it is necessary to eliminate the malfunction before operating.

Connecting the audio detector (I95 Eco, i95)

The wire Output. Connect to the "-" audio detector output, and the output "+" connects to the wire Bat. Lock module (chain "+ 12V"). Parallel to the audio detector is allowed to connect the LED (through a resistance resistance resistance 1 ... 2 com).

The sound detector is located in such a way that its signals are well audible from the driver's seat.

ATTENTION! Do not place the audio detector close to the blocking module, it can lead to a triggering of the start sensor when issuing sound signals

Connecting the output "Status" (I95 LUX)

"Status" output Output. Allows you to use the immobilizer in conjunction with external devices (alarm system, monitoring system, etc.) to track the presence of the car owner. The output works as follows:

• it has a high-altered state (break) if the label is in the distance or absent (the signal level of the tag is below the setting threshold)
• it has a low potential (-) if the label is near the car (the level of the tag signal exceeds the set approximation threshold)

Connecting a universal canal

Universal canal EXT. Can be connected to one of the following inputs (outputs):

Before connecting wire EXT. You must adjust the channel depending on the selected connection method.

To mount the indication module, use the included double-sided tape. If necessary, the power wire can be hidden in the bottom of the display of the indication module.

Connecting the indication module

1. Attach the display module by double-sided tape, which is supplied to the selected surface.

2. Make sure the ignition is turned off.

3. Black Block Module Wire Connect with a "mass" of the car.

4. Black wire with a gray stripe. Connect with a standard wire, which is present voltage + 12V only when the ignition is turned on. Voltage should not disappear when the starter is turned on.

The StarLine I95 immobilizer is a machine motor blocker designed to prevent car hijacking. The range of Starline has several IMMO models, we will discuss in detail on the review of the I95 blocker features.

[Hide]

Description and principle of work

The use of the car lock allows you to provide reliable protection Machines from theft. This is achieved due to the ability of the device to identify the car owner through wireless technologies, with which additional DVS protection is ensured. The identification of the owner by the block is made by identifying the label, which can be in the carman of the motorist. When a radiometer appears in the transceiver actions radius, the IMMO key performs an automatic signal exchange with a processor block.

The DVS blocking procedure is carried out at the beginning of driving with a motor or ignition engine. In the absence of a radio player in the transceiver zone and the motor running, the lock will not be turned on if the machine does not go. Thanks to this feature, the consumer can use a collaborator to work with various systems Remote motor start.

An overview of the device features is represented by the Avtopulse channel.

When the processor module detects a label in the action zone after activating the ignition, the device makes a brief beep. If the radiometer was not synchronized to the beginning of the movement with the unit, then there will be an inclusion of alarm pulses, which report to the ambulance in the FRO. Motor lock is activated for twenty seconds, and if the machine starts to move after the end of the first cycle, its activation will occur again.

For each attempt to start the DVS and the start of the power unit will be blocked. After the third lock cycle, the motor will not be unlocked without an immobilizer radiometer.

If the consumer was configured by an intermittent blocking algorithm, the immobilizer will begin the procedure for simulating problems in the work of the engine. The electrically blocked by the device will periodically burst and restore on a specific algorithm.

Main features

The features of the Immobilizer StarLine i95:

1. The ability to control the locks of the hood and doors.
2. Package data transmission is carried out at a frequency of 2.4 GHz. To protect the channel, a special encoding system is used, which allows you to prevent hacking and ensure high safety.
3. Protection against robbery. If an attack and a car owner are performed on the car, you will be thrown out of the salon, the motor will be blocked when the criminal is completely distinguished from the car owner. Before blocking the motor, Immo will wait until the car speed is reset to 30 km / h or below. This is achieved through the built-in speed sensor. Moreover, other drivers will be warned about braking by automatic activation of stop lights.

The channel Miracle of hostile technique spoke about the features of the immobilizers Starline I95.

Versions of Immobilizer StarLine i95 and their specifications

The choice of users presents two models of devices - suite and eco.

LUX.

Luxury model is a more advanced version of the I95 blocker. The blocking and unlocking procedure is carried out by means of labels, there is free hand mode. To activate the option, the driver must appear in the zone of the tag. The manufacturer set up several identification modes - within a radius of 0.5-1.5 meters, 3-4 meters, as well as when the car owner is 15-17 meters from the car.

The main feature of the model is the presence of a remote control keychain equipped with key and a diode indicator. Installation of this device is performed on the instrument panel and is used to emergency password.

Eco.

This model is considered one of the most affordable. Starline Eco refers to the category of contactless blocks that allow you to detect a label in the car owner's pocket at a distance. If the owner has been successfully identified, IMMO unlocks the hood lock when it is installed ( we are talking about electromechanical devices).

Unlike the above-described model of Immobilizer Starline, there is no free hand function in Eco, and an additional indication block is not included in the package.

Photo Gallery

StarLine i95 LUX StarLine I95 Eco Blocker

Appearance and equipment

Motor block kit:

• two radiometers with power sources, batteries;
• special card, which marks a password for emergency unlocking of the engine;
• device indication unit;
• built-in traffic controller;
• blocking engine module;
• manual on the use of the device;
• consumer brief memo;
• warranty card.

The processor module is made in a small size protected by water with a built-in blocking relay. This unit is equipped with a motion controller and a power sensor of the key of the hood. The module is made in the form of a monoblock. The indication unit is a small size device designed to prevent car owner by light signals and sounds.

Radiometrs are enclosed in moisture protection glossy case and characterized little sizesThanks to which they can be hidden even in the wallet. The main feature of the labels is reduced power consumption, which is due to the use of new technologies. This allows you to increase the resource of the battery operation. Over time, the effect of the housing mirror disappears. Because of this, scratches and damage appear on it. There is a key on the label housing, with which you can control the setting of the block. Through this button, the immobilizer is translated into the service mode.

The Channel of the Audiocenter brought an overview of the configuration and the main features of the StarLine I95 blocker.

The indication unit is mounted in the cabin. The device is used for the advance warning of the car owner on the absence of a label and the upcoming locking of the DVS. Also, the module warns about the discharged battery. The main feature of the element is that with the processor device it "communicates" over a wireless channel. Accordingly, it does not have the main module of electrical communication, which means that it can be connected to any electrocups where there is food. Proper setting Block provides necessary work blocker.

How to install?

Installation of the StarLine I95 immobilizer processor block is made in secretive and inaccessible to the criminal place.

The device connector is equipped with nine contacts, each of which is designed to connect to separate electrical caps:

• mass, i.e. grounding;
• power supply of the device;
• contact for connecting to the ignition lock;
• output for connecting open contact relay;
• contact for connecting a closed relay output;
• general output for connecting relays;
• two outlets for connecting the opening and closing of the electromechanical lock of the hood;
• terminal switch locks;
• output to connect the status radio channel;
• contact for connecting a universal radio channel.

When making installation, you can connect not all contacts, however, to ensure minimal protection, you will need to connect all outputs other than the last two. To activate the indication module, it is necessary to connect ground and the ignition lock. The length of the wires that are included in mounting kitIt is 25 cm. Because of this, the consumer will have to increase cables.

Channel Garage Region-51 provided universal instructions for installing the DVS blocker.

User's manual

Management of various modes and settings of the StarLine i95 equipment is performed using the technical manual.

Opening of car doors

The signal to open door locks is issued in the following cases:

• when the car owner is suitable for a car for a distance that corresponds to the zone of the label;
• if the ignition is turned off when the opening function is configured door locks When turning the key in the lock to OFF;
• if the system goes into the emergency shutdown mode, but this will occur after entering the password;
• when you turn on the service mode.

Closing of car doors

The closing signal is transmitted in such cases:

• if the auto owner moved away from the car for a certain distance that the consumer configured in advance;
• if the option of additional closure is enabled at the beginning of the movement and the car moved from the place.

Use of service mode

If you plan to transfer the machine to service, then you need to activate the service mode:

1. Click the button located on the tag body, and hold it. This will lead to the fact that the device will check the specified operation mode and will establish a connection with the processor module. The key must be kept for seven seconds until the diode indicator burns yellow.
2. The key is released at the moment when the diode indicator lights up for two seconds.
3. If the immobilizer enters the service mode, the bulb is blinking yellow again.

Konstantin Chats spoke about the characteristics of the blocker and its use on the example of the car Kia Sportyj..

Registration Tags

Registration of new tags is made like this:

1. Click on the RF key located on the housing. It is kept for three seconds, then released.
2. On successful binding the radiometry will report green outbreaks of a diode light bulb. The number of diode burnings will correspond to the number of tied marks.
3. To transfer the radiotechnics to normal operation mode, you need to remove the power supply from the device, and then re-install it.
4. Previous three steps are repeated to bind the remaining radiometers.
5. When the registration procedure is completed, the ignition turns off.

Pros and cons

Advantages of striking blocks:

1. Effective hijacking protection. It is performed by blocking the engine.
2. Aunting owner. To identify the user you just need to approach the car.
3. The presence of a protected communication channel ensures the safety of the transmitted signals from the interception.
4. The presence of a built-in motion controller. For proper connection Immo to the alarm, thanks to this sensor, you can configure the remote launch of the DVS.
5. The ability to control door locks, as well as the hood lock.
6. Due to the moisture-proof body, the breakdown was excluded due to water exposure.
7. The use of a universal connection channel will allow the blocker to connect to the terminal switches, the brake pedals or the touch controller.
8. The ability to adjust the DVS block with a computer.

The main disadvantage, according to reviews, can be called a relatively high cost, it is about 7 thousand rubles. For such a sum, the consumer can acquire alarm with lilac.

It would seem that there would be enough modern and high-quality immobilizers, but in fact it turns out that you have to choose enough Pretchily, because not all manufacturers are really invested in their projects, preferring more to spend on advertising. One of the very decent options is the StarLine i95 LUX model that can boast not only good advertising company, but also with real possibilities that have already been evaluated by a variety of car enthusiasts.

The StarLine i95 LUX model boasts the following strong sides, without which it was unlikely that it was unlikely to do:

• protection against hijacking, based on engine lock and the need to identify the owner;
• the ability to control the hood lock;
• effective protection against the most complex techniques of intelligent attacks;
• modern water label.

ATTENTION! Found a completely simple way to reduce fuel consumption! Do not believe? Auto mechanic with 15 years old also did not believe, until he tried. And now it saves 35,000 rubles per year in gasoline!

This immobilizer is a novelty, which means there are really high-quality technical solutionsThe manufacturer was able to do a lot so that cars of people who have chosen his technique were 100% protected. Believe it is not always possible, because we are used to listening to this kind of laudatory opinions about various techniquesBut this is not the case.

ECO version

The attention of StarLine i95 Eco is worthy of attention, which has the following security features:

• the host presence signal;
• warning signals;
• switching modes.

The most interesting thing is that this immobilizer can provide imitation of engine malfunction. It is difficult to imagine that hijackers who know about such features of the work may be caught. modern Systems. Now immobilizers become a multi-level obstacle before the opportunity to steal the car.

Technical perfection

The StarLine I95 Lux project has become a project really modern. Such large number positive feedback About such a project you could hardly expect. Not surprising, it is sold very quickly, and motorists are so amazed by the quality of the system, which is easily coped with everything. If earlier, such technologies were only originated, now the highest level specialists can simply ensure that the engine wireless lock will be provided with the help of this device, that those signals from the identifier label that are used in the system cannot be intercepted. Dialogue authorization is performed at a frequency of 2.4 GHz, which is another advantage of the system.

In addition, an excellent solution was a special waterproof case. This project is comprehensive, solid, one strong side complements the other and so on-turns powerful defense vehicle From hijacking One of distinctive features This series is the ability to block the hood of the car. This seemingly too simple a decision actually works great. The fact is that the inability to penetrate the carpentry space of the car does not allow the hijackers to solve some problems that arise between them and your car. More importantly that protective Systems It becomes greater and, like the layers of the bulbs, the kidnappers have to spend a lot of time and effort to overcome protective systems, and they are just no time, it means that your car is complete.

Pleasant bonuses

Starline is an explicit leader in this area, which means that if you would like to get decent support from the specialists, then it is necessary to contact it. The instruction on the equipment does not represent anything difficult and will allow anyone who wants to understand all the intricacies of the device. At the same time, the instruction will not give answers to the question of how these protective systems are overcome, so it will not answer all the problems of hijackers. On the contrary, the instruction will be a confirmation of the fact that the hijackers are completely powerless against what the Starline has created.

If the company is invested in its projects with all soul, it is much better visible if you pay attention to the little things. For example, in these immobilizers, moisture-proof case designs are used, which means that there are no restrictions on their storage and operation, then you will not be worried about the quality of safety, signal transmission, the ability to transfer commands. No reason to worry about rechargeable batterywhose charge is enough for at least 3 months permanent use. Indeed, immobilizers require very little energy, the signal is sent instantly, so the duration of work is always striving for zero. If it was possible to put the batteries more than the battery, the charge was labeled for years.

Between LUX and ECO

Remember that the LUX and ECO models have minor differences. It can be said that Eco has no pair additional featuresThis version boasts:

• locking the hood and power outputs of the lock control;
• label moisture proof;
• telematics, that is, "in the air".

If we talk about the LUX model, then this immobilizer received two more additional features:

• "Free Hands" technology, which greatly simplifies the control of the central locking door;
• very comfortable salon modules that allow you to manage all systems, as well as an indication module.

The configuration of this equipment will delight you with completeness, there really is everything you need and useful:

• lock module;
• user's manual;
• card with code;
• sound sign;
• installation and operation guide;
• tags with power elements.

Right now in front of you a system that can guarantee the safety of your car in any situation. You probably already know how easily cars are watched without such protective systems: it can take a couple of dozen seconds at an attacker from the attacker. Now you have the opportunity to protect yourself - use it.

The StarLine I95 immobilizer is a machine motor blocker designed to prevent not only hijacking, but also robber capture of the car. The electronic mechanism of this modification is a high reliability device due to the identification of the owner by contactless mark at a frequency of 2.4 GHz.

[Hide]

Specifications

Overview technical characteristics Control devices Starline:

• immobilizer protection is carried out using dialogue encoding pulses;
• the maximum range in which the user authorization is made is 10 meters from the transceiver;
• food microprocessor module It is performed from the voltage of 9-16 volts, the radiometers - 3.3 V;
• the value of current consumption when the ignition is turned off is 5.9 mA, with an on-6.1 mA;
• range of operating temperature control unit - from -40 to +125 degrees, radiometers - from -20 to +70;
• the battery life in the electronic key is 12 months.

Channel "AutoPulse" spoke about technical features and the functionality of Starline blockers.

Equipment

Starline i95 Immobilizer Supplies:

• blocking engine module;
• two electronic keys (radiometers) with batteries;
• user Guide for Installation;
• service manual for use and configuration of the block;
• plastic card;
• bipper or buzzer - sound detector;
• consumer memo.

Photo Gallery

Photo of the configuration and elements of the immobilizer:

Engine Blocker Supplies Two Radio Sticks for Immo Management

Main functions

Description of the block options:

1. The presence of two vehicle protection modes. In the usual diagnosis of the presence of the radiometry is carried out once, after switching on the ignition lock. With activated anti-label mode, the electronic key check is performed continuously throughout the trip.
2. Activation of blocking the power unit at the beginning of the movement. This allows the use of an immobilizer along with automatic and remote motor start systems.
3. Reliable immo protection from the detection of engine blocking electrical caps. Activation of the device is carried out briefly, but this time will be enough to stop the power unit. Then the electrical panel will remain in a closed state.
4. Indication of the current immobilizer action mode on the electronic key, as well as the control unit.
5. Option of changing the type of block operation using a radiometer.
6. The presence of a service mode. With it, you can disable the security options of the device if the vehicle is transferred to the service.
7. Setup mode. The function allows reprogramming a pin-code unlocking.
8. Optional quality check option. The device automatically diagnoses connecting all items.
9. The function of registering the engine block devices. This will allow calibration additional elements Such as a lock relay.
10. Availability of the control of the central lock control in automatic mode.

Modifications Starline I95

The main difference between the STARLINE I95 LUX and ECO models is the lack of "Hands Free" option at the ECO modification block.

The ECO model of immobilizers line is the most affordable optional options and refers to the class contactless systems. Luxury blocker is the most upgraded functionality - the user has the ability to configure the transceiver radius for the authorization of the owner. This model has a remote label equipped with a LED and control key (it is used to disable the device).

Differences between i95 models, i95 luxury and i95 eco:

Advantages and disadvantages

Advantages:

1. Protection of vehicle from hijacking by blocking the engine.
2. The ability to identify the owner of the car on the radiometer. During its absence, the lock will not turn off.
3. Using a protected communication channel for data transmission, which prevents the likelihood of pulse intercept.
4. Apply the built-in motion sensor. The engine lock will not turn off if unauthorized entry into the vehicle salon is recorded.
5. The electronic key to control the immobilizer is supplied in the moisture-proof enclosure. This makes it possible to prevent the label damage as a result of water exposure.
6. The presence of a universal communication channel. This provides the ability to connect to the immobilizer of the terminal switches, additional sensors, as well as the brake pedal controller.
7. Ability to configure using the computer's main features of the blocking device.

The main minus of the immobilizers StarLine I95 according to reviews consists of a high price for which you can purchase a full-fledged alarm with the engine block.

How to install an immobilizer?

Before installing the block, it will be necessary to turn off the ignition, all electrical equipment and power in the onboard network. For this, a minus terminal is disconnected under the hood from the battery. After disconnection, it is not allowed to connect to the body, as this will lead to a closure and battery breakdown.

Detailed installation instructions are included in the configuration of the immobilizer.

Power connection

Features Power Connection:

1. The contact element marked as "GND" is connected to the "mass" of the car. The wire can be connected to any complete bolt installed on the housing.
2. Contact "WAT" is used to power the device, and the voltage on it should always be. Therefore, this conductor should be connected directly to the battery or other node constantly on.
3. When the StarLine i95 connection is connected, the "IGN" contact is connected to the electrical cap, which receives a 12-volt voltage when the ignition and motor is turned on.

Connect outputs

Contact elements "LOCK" and "UNLOCK" are used to control the central lock or the keypage of the hood.

The main methods of controlling the lock, outputs, signals for opening and closing are shown in Table:

The Input contact element must be connected to the corresponding terminal switch. Such a connection will provide the ability to monitor the status of locks on the hood and doors. If they are open, the locking is not performed, so on this cable with an open hood and doors there must be a minus signal.

Contact "Output" makes it possible to use a block in conjunction with external equipment for monitoring the presence of a car owner in the cabin.

It acts like this:

1. In the absence of an electronic key in the action zone or finding it in the distance, the resistance on the wire will be high. Accordingly, the contact must be open.
2. The activation of "masses" or negative contact is performed when the owner is located with a label next to the transceiver.

Connecting sound detector

Features of the connection of the audio detector:

1. Contact "OUTPUT" must be connected to the negative conclusion of the bipper, and plus - with the WAT cable on the block.
2. If necessary, you can connect the LED bulb to the zoomer in parallel. But in the electrical panel it is necessary to add a resistor element calculated for 1-2 com.
3. When installing the buzzer, it is necessary to position it so that its signals are not muted and heard the driver.
4. It is impossible to place a bipper next to the blocking module, as this will lead to a false response of the controller of the movement.

Connecting a universal canal

The contact element "EXT" can be connected to one of the outputs:

1. Plus on brake pedals. It is used to survey the device before starting the engine blocking, if the "Anti-Frame" function is enabled.
2. Plus the terminal switch. Used to determine the state of door locks or hood. Its use is advisable on vehicles with 12-volt potential on the device, if the described lock products are open.
3. Minus contact of the touch controller (this regulator is not included in the package and is installed separately). When the "Free Hands" option is enabled if the electronic key is in the action zone, the central lock will open only after receiving the sensor pulse. The transfer of the pulse to the locked doors is carried out at a distance of the radiometer or long-term exposure to the controller.
4. Negative output to stop lights, designed for 400 mA. This element is used to notify other drivers to stop vehicle before blocking the power unit. Warning light pulses in the cabin are duplicated by stop lights.
5. Minus exit to overall headlights, designed for 400 mA. This element is used for the light indication of automatic opening and closing door locks. When the signal is applied to lock, the overall lighting devices are blown out once. Together with the pulse on the opening of the door locks, the headlights will blown twice.

Connection schemes

Connection schemes are shown in the photo:

General Card Connecting the Control Block

Manual

According to the operation manual, before using the blocker to the electronic key, you must install the working power source. To do this, you need to remove the back cover of the label and insert a battery in it taking into account the polarity. On the enable device will report the LED indicator. If you are programmed new electronic keys, you do not need to insert the battery.

Keychain and its activation

Key Programming Guide:

1. Ignition turns on. You must wait until the immobilizer reproduces the beep. Then the ignition is turned off.
2. It is then activated again, while the block must select a series of sound signals. To unlock, you need to know the code that is specified on plastic Map. Ignition must be disconnected at the moment when the number of sound signals will correspond to the first password digit.
3. The procedure for entering the remaining code characters is valid similarly. The ignition is turned on, and if the immobilizer accepts a password, three audio impulses will sound. This speaks about the input of the block in the emergency unlock menu.
4. The next step is the input to programming mode. After turning on the ignition in twenty seconds, one long signal will be distributed. The system is turned off until the pulse is played.
5. Ignition turns on again. There should be seven short audio impulses, which speaks about entering the registration menu of new key chains.
6. A button on the radio player is pressed. Holding it in such a state, you need to set a new power source. Pressing the key is performed for three seconds.
7. When successfully binding the label, the LED element will begin flickering green. The number of morgue corresponds to the total number of programmed keychains. If the binding is not executed, the LED will glow red.
8. To transfer an electronic tag to normal mode of operation, it is necessary to extract and insert the battery again.
9. The actions described in paragraphs 6-7 are repeated for each programmable key.
10. After completing the task, you must turn off the ignition. All radio players need to be registered in one binding cycle, a total of up to four keys can be programmed.

Alerts and indication

Sound and light signals are shown in the table:

Immobilizer action mode	Electronic key signals	Sound impulses	Notes
Ordinary car protection	Two LED blinks green
Included "Anti-Frame"	Double flicker bulb red
Service mode	Two Frigions of LED Yellow		Deactivated protection function
Normal protection mode with disabled electronic key recognition	One light green diode		There is no connection with the electronic key
The option "Anti-Frame" with deactivated recognition radio player	One impulse red
SERVICE MODE LOCK MODE	Single flickering LED yellow
Successful electronic key recognition		One sound impulse
Normal protection mode when the radiometer is disabled		One buzzer signal in two minutes
Battery discharge in electronic veneer	Three flickering of the LED on the label in red	Triple sound impulse	Replacing the power supply
Problems in the work of the lock control locks		Double beep
Warning of the upcoming blocking of the power unit		Single intermittent sound impulses

Door lock management

With the activated function "Free Hands", the opening of the door is made at the following events:

• approaching a car owner with an electronic key to a vehicle standing in place (the range is programmed by the user);
• disabling the ignition system (if this function is pre-configured);
• transition to the emergency unlocking menu of the immobilizer if the PIN-code has been successfully entered;
• login to service mode.

The closure of door locks is carried out at the removal of a car owner with an electronic key from the immobilizer control unit. Deactivation is performed at the beginning of the move, if the additional locking function was previously configured.

If the Universal Channel "EXT" is used, then the closure of door locks is performed by means of a long exposure for three seconds on the presence controller. In this case, the electronic key must be in the range of action.

Signals for opening locks When applying the "EXT" channel, if:

• the hand touch controller worked when the radiometer is in the radius of the transceiver operation;
• ignition turns off if the user has configured this feature in advance;
• included in the emergency unlock menu, if the code was correctly entered;
• there is a transition to the service mode.

Capital lock management

The signals for locking the hood are transmitted to the control unit at a removal of the car owner tagged from the vehicle. In this case, the ignition system must be disabled. Also, the locking product will close when issuing pulses warning about the upcoming blocking of the power unit.

The opening of the lock is carried out if:

• the ignition in the car is turned on, and the label is within the transceiver radius of the transceiver;
• included in the emergency unlocking menu of the immobilizer;
• the auto owner with an electronic key falls into the zone of action of the control module;
• log in to the service mode.

The user Andrei Popov on the example of the car Hyundai Grand Starex spoke about the control of the StarLine I95 blocker.

Service mode

The input to the service mode is performed as follows:

1. A key on the electronic key is pressed and is kept. The immobilizer must diagnose the specified functioning mode and establish communication with the control unit. The radiometer button is clamped by seven seconds until the LED starts flicker yellow.
2. At the moment when the light bulb will turn on for 2 seconds, the button is released. About the entrance to the service engine of the engine blocker will report a single LED blinking.

Programming the indication module

The additional block is attached like this:

1. The device is connected to the device.
2. After activation, automatic communication channel control is performed. The end of this procedure takes place in ten seconds before completing the flicker of the diode light bulb.
3. The button on the display unit is clamped and holds for three seconds, then it must be released.
4. With successful binding of the module, the LED light bulbs blinks with green. Otherwise, flicker will be red.
5. To exit the programming menu, the ignition is turned off.

Download Installation and Operating Instructions Starline i95 in PDF format

You can download service guides on installation and application by links:

How much does Immobilizer Starline i95?

Approximate Prices for the purchase of engine block:

Video

AutoElectrician Sergei Zaitsev told about the features of the control and configuration of the Starline engine blocker.

5th generation immobilizer StarLine i95 Eco.- This is a contactless immobilizer in which the recognition of the key label occurs with the help of dialogue authorization. Unlike their senior fellow immobilizers StarLine i95 and StarLine i95 LUX The presented model does not have the ability to implement the "free hand" feature, which allows you to control the central lock of the car without pressing the keys, and only by approaching and removing the tag.

If you plan to install with the immobilizer and the hood lock, then we still recommend that we still choose from StarLine i95 and Starline I95 LUX models.

Anti-theft device StarLine i95 Eco. Guarantees the safety of the required charge of the car battery under 3 months in the active mode due to the use modern technologies and progressive software solutions.

Hermetic thanks to a unique moisture-proof design of the housing, the label can be in water at a depth of 1 meter for 30 minutes, which removes all sorts of restrictions on its storage. You have the ability to independently regulate the tag sensitivity for a more flexible adjustment of the range when authorization. The built-in immobilizer motion sensor allows you to securely protect the car and at the same time produce remote engine launches on a fixed car. The immobilizer is equipped with outputs for connecting the hood lock: the automatic locking of the hood in the absence of the owner guarantees confident protection of the rotor space and electric car.

	Dialogue protection Starline Management Dialog Code with individual encryption keys 128 bits guarantees reliable protection from all known codegrobrors		Protection of the hood Automatic locking of the hood in the absence of the owner provides reliable protection of the operating space and car wiring		Advanced temperature range Starline works confidently in harsh climatic conditions at temperatures from -50 to +85 ° C due to high-quality components
	Autostat Built-in motion sensor Allows you to use an immobilizer in conjunction with remote engine start systems.
	Waterproof label The original design of the label housing ensures confident work even after entering the water.
	Record energy economy Record energy economy - 5mA through the use of patented progressive technologies and software solutions
	Power keys Provide hidden silent operation of the alarm unit and protection of power outputs from random short circuit		Patent protectionAll technical solutions and status designs Starline are protected by patents and copyright certificates.

Starline security systems with dialogue protection are developed and manufactured in Russia and are designed to work in a wide range of temperatures from - 45 to +85.

Company Barbus. It is installed on car alarms and immobilizers supplied by Ultrastar. Ultrastar - Group of Companies, more than 25 years successfully operating in the market of electronics, telecommunications and security systems. The mission of the Ultrastar company, which she followed from 1992 to this day: "Provide residents of Russia and the Commonwealth countries high level Security based on progressive technologies of the world community. " IN Price list Some are presented, the most common, models of car alarms and immobilizers. We constantly test new ones in the model in the market and try to offer our customers the most resistant to hacking and reliable in the system. Our employees are constantly improving their skills, participate in conferences and seminars on issues related to security and security systems. Have an opportunity . Full list can be viewed on page Retail Signaling .
Company Barbus. is an authorized automotive service center security systems Starline brand in St. Petersburg and has the appropriate certificate .

Payment is possible both cash and non-cash payments. Accepted to pay bank cards.

Company Barbus. Provides services for installing alarms, immobilizers, mechanical means protection and audio equipment on any automobiles of domestic and foreign production and operates with 1999 of the year.