Module control circulation pumps RSM. PCM Danfoss New microprocessor pumping modules pumping stations. Two circulating pump control algorithms

Danfoss has released a new line of control controllers pumping stations.
PCM Danfoss microprocessor control modules are designed to control work, monitoring and preventing emergency situations in pumping stations in heat, cold supply and water treatment systems. This ruler is made on the basis of a free programmed MCX controller with pre-installed software.
A distinctive feature The data of the controller is the simplicity of customization and integration into the system of comprehensive automation of thermal items. PCM devices are sync with any dispatch control and management system. For convenience of working with PCM, you can connect them to the external MMIGRS2 display on the front panel of the automation cabinet (the degree of protection of the IP64 case), which avoids excessive penetrations into the closet to check the controller status and make adjustments to its settings.
There are five new ruler. ready-made solutions For automation pumping equipment:

PCM CWS is a controller designed to regulate water pressure in cold water supply systems, rising, pioneering and mixing pumping stations with cascading connection up to four pumps in one pump group. Three work algorithms are supported: each pump in the group with a personal frequency converter (IF), one IF to the pump group and the operation of all pumps from the network or a smooth starter device.
PCM CP - the controller designed to control up to three circulation pumps in the group provides support for circulation in hot water, heating, cold supply systems.
PCM RP is a controller for controlling one or two pumps in the group, provides support for the required volume of fluid in the main system due to its feeding. As locking device can be applied solenoid valveadjusting an electric drive valve (three-position control) or a ball valve with an electric drive.
PCM DP is a controller designed to control a group of two drainage pumps that provide pumping (removal) of groundwater, liquid as a result of the flooding of the thermal point. The controller is performed on three level sensors.
PCM MM - controller designed to build on its database of remote monitoring and control automation systems technological process, watercading for thermal items, dispatch control systems.

Universal controllers of this line are distinguished by small dimensions, reliability and full compatibility with frequency converters And Danfoss sensors. Published on 12/22/2015

PCM Danfoss microprocessor control modules are designed to control work, monitoring and preventing emergency situations in pumping stations in heat, cold supply and water treatment systems. This ruler is made on the basis of a free programmed MCX controller with pre-installed software.

A distinctive feature of the controller data is the simplicity of configuration and integration into the system of comprehensive automation of thermal items. PCM devices are sync with any dispatch control and management system. For convenience of working with PCM, you can connect them to the external MMIGRS2 display on the front panel of the automation cabinet (the degree of protection of the IP64 case), which avoids excessive penetrations into the closet to check the controller status and make adjustments to its settings.

In total, there are five ready-made solutions for automating pumping equipment:

PCM CWS. - a controller designed to regulate water pressure in cold water supply systems, rising, pioneering and mixing pumping stations with a cascading connection to four pumps in one pump group. Three work algorithms are supported: each pump in a group with a personal frequency converter (IF)), one inverter to the pump group and the operation of all pumps from the network or a smooth starter device.

PCM CP. - The controller designed to control up to three circulation pumps in the group provides support for circulation in hot water systems, heating, cold supply.

PCM RP. - The controller for managing one or two pumps in the group provides support for the required volume of fluid in the main system due to its feeding. A solenoid valve controlling the electric drive (three-position control) or a ball valve with an electric drive can be applied as a locking device.

PCM DP. - a controller designed to control a group of two drainage pumps that provide pumping (removal) of groundwater, liquid as a result of the flooding of the thermal point. The controller is performed on three level sensors.

Universal controllers of this line are distinguished by small dimensions, reliability and full compatibility with frequency converters and Danfoss sensors.

ATTENTION!

Dear Clients!

Danfoss has released a new line of control panel controllers.

For convenience of working with PCM, you can connect them to the external MMIGRS2 display on the front panel of the automation cabinet (the degree of protection of the IP64 case), which avoids excessive penetrations into the closet to check the controller status and make adjustments to its settings. In total, there are five ready-made solutions for automating pumping equipment:

PCM CWS.- a controller designed to regulate water pressure in cold water supply systems, rising, pioneering and mixing pumping stations with a cascading connection to four pumps in one pump group.
Three work algorithms are supported: each pump in a group with a personal frequency converter (IF)), one inverter to the pump group and the operation of all pumps from the network or a smooth starter device.

PCM CP. - The controller designed to control up to three circulation pumps in the group provides support for circulation in hot water systems, heating, cold supply.

PCM RP.- The controller for managing one or two pumps in the group provides support for the required volume of fluid in the main system due to its feeding. A solenoid valve controlling the electric drive (three-position control) or a ball valve with an electric drive can be applied as a locking device.

PCM MM. - The controller designed to build on its basis systems of remote monitoring and automation of the control of the technological process, watercading for thermal points, dispatch control systems.
Universal controllers of this line are distinguished by small dimensions, reliability and full compatibility with frequency converters and Danfoss sensors.

	Cable KVV for submersible pumps
	Product Name	Price per meter
	KVV 3x1.5 cable for submersible pumps	70
	KVV 3x2.5 cable for submersible pumps	90
	KVV 3x4 cable for submersible pumps	130

	KVV 4x2.5 cable for submersible pumps	120

	Checkout \u003e\u003e

	Stainless steel cable for submersible pumps
	Product Name	Price per meter
	Cable 3 mm, from of stainless steel	50
	5 mm cable, stainless steel	70
	Cable clamps 3-5 mm (price per pc.)	70

	Checkout \u003e\u003e

	Pipe PND (Polyethylene drinking pipe)
	Product Name	Price per meter
	Pipe PND, 32 mm	50

	Checkout \u003e\u003e

	Control cabinets, control units, automation elements, fittings
Cabinet control Pumps LCD.	Model name	Price, rub)
	Control cabinet for the 1st pump LC 108.400 1.6-5 A, 380 V	28 500
	Control cabinet for the 1st pump LC 108.400 3.7-12 A, 380 V	29 700
	Control cabinet for 2 pumps LCD 108.400 1.6-5 A, 380 V	39 300
	Control cabinet for 2 pumps LCD 108.400 3.7-12 A, 380 V	40 400

	Control cabinet for one SEG pump: Cu 100.230.1.9.30 / 150.A, 220 V, up to 9 A, with a launcher capacitor and a float switch	20 300

	Valve Reverse Ball Coupling DN40 PN10, Italy	2 310
	Valve Reverse Ball Coupling DN50 PN10, Italy	2 780

	Automatic pipe coupling DN40 / RP L 1/2 "	6 500

	Taurus WF (PVC) Float Switch 10 m, TECNOPLASTIC (Italy)	2 500
	Taurus WF Float Switch (PVC) 20 m, TECNOPLASTIC (Italy)	3 500
	Fastening Float Switch, TECNOPLASTIC (Italy)	270

Rusnasos is not only a project to implement water supply equipment, but also high-quality automation for pumping equipment. Here in different modifications, high-quality automation is available - the water pump control unit (pump system) GRUNDFOS.

This cabinet LCD depth control automatics, the price of which is represented by our project, is able to control and direct the operation of pumps. Pumping pump control cabinet works with one or two submersible installations.

Such a block with a relay (pressure sensor) Grundfos pump is designed to optimize pressure in pipelines. With the slightest risk of overflowing with liquid, overheating, the "dry" stroke of Grundfos LC A1, LCD 108 signals the user about the character of complications.

Automatic block (cabinet) submersible control, drainage pump (Two pumps) Grundfos Cu 301, the price of which is fixed in low limits, provides thermal protection of the electric motor. Automation for submersible, drainage, borehole pumps - This is a decrease in energy costs and lightweight systems. Such automation for water pumps, pumping stations, like a CNS control cabinet, significantly reduces the time of possible "downtime" of the heat network.

The Danish automation unit for pumping stations is beneficial to use from the point of view of savings. The control unit is submersible, drainage, the well pump spends less energy resources. In addition, the pump automation unit helps the consumer spend the minimum amount of water.

	Engines for borehole pumps Sumoto 4 "(1 x 230 V)
Sumoto engines	Model name	Power P MAX (kW)	Diameter D (inch)	Price, rub)
	OPM 050 V230 / 50 1500N *	0.37	4"	5 990
	OPM 075 V230 / 50 1500N *	0.55	4"	6 330
	OPM 100 V230 / 50 1500N *	0.75	4"	6 880
	OPM 150 V230 / 50 1500N *	1.10	4"	7 350

	OPM 050 V230 / 50 1500N **	0.37	4"	5 860
	OPM 075 V230 / 50 1500N **	0.55	4"	6 110
	OPM 100 V230 / 50 1500N **	0.75	4"	6 460
	OPM 150 V230 / 50 1500N **	1.1	4"	7 520
	OPM 200 V230 / 50 1500N **	1.5	4"	9 020
	OPM 300 V230 / 50 1500N **	2.2	4"	11 200
	* 220B engines with built-in capacitor ** The cost of 220B engines is shown without taking into account the cost of the starting box.

Our project chosen SUMOTO engines for borehole pumps in order to implement in Russia. Such technique as the pumps, Sumoto has served for many years. The Japanese company is a narrow-profile automation specialist. Sumoto produces products in demand in Russia. The technique of this manufacturer reached the same level of demand as Grundfos electric motors. If our compatriots need to buy an engine for a water well pump, most often they choose the brand.

	Accessories for well equipment
Downhole Baker Adapter	Model name	Price, rub)
	Borehole Adapter F-2220-1 Fitting	2 400
	Borehole Adapter F-2220-1 "1/4 fitting	3 100

	Cover K133.	2 800
	Cover K159.	3 100

	Borehole universal adapter for casing pipes with a diameter of 100-200mm Attach 1 "	3 830
	Borehole Universal Adapter For casing pipes with a diameter of 100-200mm Attach 1 1/4 "	6 230

	Cap for casing D127 mm 4.5WE1	3 600
	Lid for casing D152 mm 5.5WE1	4 190
	cap for casing D165 mm 6.5WE1	3 600

In our catalog, also accessories for pumps as a universal borehole Baker pipe adapter. All over the world to buy a well adapter Baker preferred as an alternative to bulky and expensive caissons.

	Control and automation devices Grundfos (Germany)
Starter SQSK.	Model name	Price, rub)
	Electromagnetic Starter of the CIM series with a current protection from 1.8 to 12 A (models 9-94, 9-95, 9-96, 9-97)	4 860
	SQSK Starter for SQ, 220 V Series Pumps	9 700

	Electric motor protection module for UPS 200, 220 V	2 400
	Electric Motor Protection Module for UPS 200, 380 V	2 600

	REPIA MODULE FOR UPS 200, 220 V	7 600
	Relay module for UPS 200, 380 in	8 100

	Set of relay modules for UPSD series 200, 220 V	14 800
	Set of relay modules for UPSD series 200, 380 V	6 900

	Relay thermistor protection for engines with a capacity of more than 3 kW MS220C	2 930
	R100 control panel	9 680

Grundfos SQSK electromagnetic starters - everywhere popular automation for circulating, enhanced, depth pumps manufactured by Grundfos.. The R100 remote control greatly facilitates the connection and operation of SQ borehole pumps. The starter also has a module for attaching a dry-running relay.

Often, a submersible pump with a float switch is often used for the water supply of cottages, a private house or shop. In this case, the device will provide the ability to connect the Grundfos float switch. The electromagnetic starter is designed by the criteria for maximum safety and performance of systems.

	Protection against dry stroke
Pressure relay LP3.	Model name	Price, rub)
	Clm / 35 Maniero Relay (Italy)	1 980
	RM4LG level relay (Germany)	5 810
	Protection relay from dry running LP3 (Italy)	450

	Electrode EL-1 (Germany)	1 350
	Electrode SL 1/00 \u200b\u200bManiero (Italy)	410

In a complex with other devices, dry-run protection relays is widely used for water supply cottages, houses, manufacturing buildings. Pressure relay for pumps production of the Italian brand Maniero is applicable when using a membrane battery tank.

The LP-3 GRUNDFOS device is purchased by our compatriots not only as electronic protection from dry running, but also as a device for the full automation of the pump. The model starts during a decrease in pressure in the system and timely shutdown when the limit point is reached. Each dry-end protection sensor provides powerful and uniform water supplements in hundreds of Russian cities.

	Grundfos pressure relay (Germany), Tival (Germany)
Pressure Relay FF \u200b\u200b4	Model name	Price, rub)
	Relay MDR 5-5 (Grundfos)	2 550
	Relay MDR 5-8 (Grundfos)	2 900
	MDR 5-5 / K relay with thermal protection 6.1-10.3 A (Grundfos)	4 300

	Relay FF \u200b\u200b4-4 Dah (TTVAL)	3 150
	Relay FF \u200b\u200b4-8 Dah (Tival)	3 200
	Relay FF \u200b\u200b4-16 Dah (Tival)	3 420

Grundfos MDR pressure switch, FF are produced in the homeland of brands - in Germany. Purchase the pressure switch Grundfos MDR 5-5, 5-8, FF 4-4, 4-8 - means to provide yourself with a high-end device capable of working without a control panel.

BRIO 2000 M Press Control Press Control Prepare More european countries. it electronic device ITALTECHNICA, regulating pump functions. This device is necessary in conditions of use. membrane tank and pressure relay.

	Pressure switch
Press Relay PM.	Model name	Price, rub)
	Mode relay.3781 02 Genebre, (Spain)	290
	RM 5 (Italy), up to 5 bar, 25 A, with a cape nut	410
	PM 12 (Italy), up to 12 bar, 25 A, with a cape nut	500

The Rusnasos project presents its customers a sensor for protection against the dry movement of the Spanish company "Genebre". For more than five years while in the domestic market, this pressure relay is valued by Russian techniques for the speed of "reactions" to change the pressure on the network. The absolute versatility of the device allows you to enter it in the package of pumping equipment.

	Headband Well Dzheleks (Russia)
Holy borehole djilexes	Model name	Price, rub)
	OC-133-32.	3 800
	OC-133-40.	3 800
	OC-152-32.	3 800
	OC-152-40.	3 800

Professionals Installation of heating systems are chosen by a borehole jilex for reliable sealing, which the device provides the mouth of the technical well. The device came to the level of demand, characteristic of such automation as a duct sensor, check valve, GRUNDFOS end seal. Headband Well OS-152-32, 152-40, 133-32, 133-40 allows you to protect the well from penetration groundwater and any extraneous objects and strengthen the pump hanging.