Useful and simple electronic devices and homemakes with their own hands. What homemade housekeepings can be made with their own hands cool homemade handmade

Make your home much more comfortable crafts made from old items and things that can be returned to the second life. Some manufactured homemade housekeepings can significantly save home budget, facilitate work or make the surrounding interior more interesting. And even if difficulties arise in the process, their overcoming will cost.

Homemade homemade workshop

Almost in any house there will always be any set of instruments necessary for the economy. But sometimes there are situations when to work in your own workshop or garage requires any device, which is no longer possible to purchase in the store or it is very expensive. In this case, the output can be found by making it yourself.

Blacksmith Mountain from Callon

This metal heating device will become an indispensable assistant in a home workshop. Mountains can be safely used to make original items using artistic forging. It will be truly unique forged items.

For the mining, it is best to use an empty gas cylinder with a capacity of 25 liters. Its ends are cut by a grinder, and the door of the mountain and its rear will be made of the cut-off pieces. The inner part of the balloon is covered with a refractory ceramic wool, which is capable of withstanding the temperature of more than 1200 0 C. From above, it is cooked chamotte clay (fuled), withstanding temperatures up to 1500 0 C. On the bottom of the mountain after a lining, chamotte slabs or refractory bricks are stacked.

The hole is drilled on top and a small slight is inserted, which allows inserting a nozzle of a burner burner, which can create in a mountain temperature more than 1000 0 C - is quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane-beam

In the manufacture of such a lift, cash spending will be much less than buying a factory model. For its manufacture, you will have to spend only on materials, half of which may be found in the garage.

Materials required for lift assembly:

1. Two racks - profile pipe 100x100x2350.
2. Transverse rod - steel pipe arbitrary length with a diameter of 100 mm.
3. Four rod supports - profile pipe 100x100x600.
4. Base and discontroll - a corner with shelves of 100 mm.
5. Two metal rollers for cable.
6. Four wheels for movement.

For the lifting mechanism, it is best to use a manual winch with a worm transmission with a maximum load of up to 500 kg, which is attached to one of the stracks of the crane-beam.

The design does not take up much space in the workshop, easily moves through solid coating and is quite convenient for removing the engine from the car.

Mobile instrumental stellage

The main highlight of this rack is its small amountBut at the same time it can accommodate a large number of tools, and if it is necessary to - quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when maintaining construction and repair work in large rooms, especially when you often transfer tools.

The rack can be collected on the basis of a collapsible rack of plastic installed on a homemade platform with wheels (trolley). The platform is made clearly under the size of the rack of a metal corner with the shelves of 45x45 mm or a plywood sheet with a thickness of at least 10 mm. For movement, furniture metal wheels are used.

To the rack additionally you can make and fasten fastenings for building levels, extension cords and other tools that can be stored in a hanging position.

To help hostess

There is no financial opportunity to buy, for example, any of the new furniture in the furniture salon or make an order for its manufacture. But you can always get out of this situation, making the right thing with your own hands, while making it attractive and unique, using remedies for this.

Kitchen Apron from traffic jams

The kitchen apron is a wall surface between the worktop and mounted cabinets. Usually this part of the wall is facing tiled tiles. But for its coverage it is possible to apply many other materials, for example, gluing wine plugs on the wall.

Such an exclusive decor looks pretty great.

Before the sticker, each plug is cut along a length of two halves with a sharp stationery knife. The wall is preferably painted in black, which will emphasize the seams between the corks.

The plugs are glued onto the wall using liquid nails in a chess order either with a specific pattern, as ideally exactly it is unlikely to lay them out, and curved rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but quickly dumps and are poorly laundered, so it is best to close them with a glass screen from a calene glass. True, it will have to spend a little to spend a little and order glass in a special workshop, where they will cut it on the specified size and make holes for sockets and fasteners.

Glass fixes to the wall anchor dowelsthat can be purchased almost in any construction store.

Although the apron, decorated with wine stoppers, may be expensive, but the result achieved will cost this.

The surface of the table top, as well as the wall, you can decorate traffic jams and cover with rotable glass.

Hinged folding table

The folding table attached to the wall allows you to save some square in the apartment. In the crowded state, it can perform from the wall at a distance of no more than 10 cm and does not interfere with anyone, but in the unfolded form it can replace a full-fledged table.

Options where you can use a hinge table fixed to the wall, a lot. Here are just a few of the most basic:

Shower for dacha

Probably nothing is better than refreshing under the jet of water hot summer day, especially if he passed the work in the garden. Naturally, only the souls will solve this problem and remove fatigue accumulated in the day.

The shower can be installed on their own without attracting assistance, the main thing is to choose the place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showerwho can freely build on their own:

Installing a simple shower is made in this way:

1. A frame of a shower cabin is manufactured, which can be assembled from metal, wooden bars or other girlfriends.
2. A metallic or plastic water container is installed on the roof of the collected frame, which can be from 50 to 200 liters.
3. Metal capacity is desirable to paint black for better water warming up. Additionally, several heating electric tanks can be installed in the container, then the shower can be taken in cloudy weather.

Cabinet can be seen by boards, plywood, slate or simply cover with tarpaulo or cellophane film with folding pads.

For construction on their own

The topic of construction or repair, probably, worries everyone. And, of course, everyone who does it wants to end it with minimal financial costs. Therefore, if you want to save, you can make some materials for construction to make on our own. For example, it may be a wall sip-panel or such a useful tool like vibratinglitis, the need to which often occurs in many landlord owners.

Homemade sip panels

For their manufacture, you need to prepare a flat rigid platform. Putting a sheet with a thickness of a thickness of 10-12 mm rubber spatula with a thickness with a thinker with a rubber with teeth on it.

Then to glue the sheets of foam of the brand 25-30. After that, on top of the stacked foam, the adhesive mass is applied to the bottom slab, and the second sheet of OSP is stacked on top.

If simultaneously is made by several stacks stacks, work should be performed quickly until the glue is freezing. Usually in this way you can prepare for more than 4-5 panels at a time.

After the workpiece for the formed plates you need to create pressure using the press. Since at home, naturally, there is no hydraulic press, it can be replaced with a thick plywood sheet laid on the prepared sip-plates throughout the plane and twisted for 2-3 hours, for example, several bags with cement, sand or other cargo. You can take advantage of even a passenger car, having stopped on a plywood sheet according to a pre-made overpack.

After the glue is finally dried, the homemade panels will be ready, they can be folded into a separate stack and begin in the workpiece of new panels. Made panels should be left without cargo still, after which they can be used for their intended purpose.

Production of vibratinglitis

To make homemade vibrating plates, you will need to cook:

1. Electric engine with an eccentric of the brand IV-98E, which is the main part of the vibrating plates.
2. Steel sheet, a thickness of at least 8 mm in size 450х800 mm. It can be ordered on any metal bondage.
3. Two slices of chapellery long no more than 400 mm.
4. Inch tube for handle and two rubber bushings for its attachment.
5. From the tools you will need a device for welding, Bulgarian and a set of wrench keys.

From the narrow sides of the plate, retreating from the edges of 80-100 mm, make an incision with a grinder about a depth of about 5 mm. After that, get the edges in the direction of the outbreak at an angle of about 25 0 and weld them. The bend is needed so that the vibratinglitis does not immersed in the material that seal it and fluently moved along its surface.

Then across the plate at a certain distance designed to fasten the electric motor, two channels are welded with shelves down. Through pre-drilled holes in a channel, with the help of M10 bolts, an electrovibrator is attached to them.

The handle made from the pipe is attached to the vibrator through soft rubber bushings, which can be bought in the auto parts store or in a construction store in the fastener department.

Thus, you can make a lot of things useful in the farm, having spent only part of the money that would have to pay when buying a finished product. We just need to make some effort and have certain skills.

Making electronic homemakes with their own hands has gained popularity in the past century, when semiconductor devices appeared. With their help from the old equipment, it was possible to simply collect the devices necessary for everyday life. Today, repair and collecting equipment for home or giving, for a car or garage can also be solved at home.

[Hide]

Homemade devices for home and summer cottages

Electrics for home and summer cottages using electricity power can make every electrician. Most devices are created on the basis of the factory components and requires only school knowledge of electricity.

Electroshevychnitsy

The electroshalvant can be both horizontal and vertical. In stores usually sell vertical, and they perfectly cope with their functions after some refinement.

To create a horizontal barbecue, a heating element and a frame that resembles a brass is required. It is possible to make a heating element from a ceramic tube and a nichrome spiral wound on it. The tube is fixed through an insulating material in a metal housing. For assembling the case, drawings will be required.

Skelut mangal

An equally interesting idea is a skewed brazing brazier with electrical drive to rotate shampoo. By adding an electric motor to a regular mangal, you can get a great device that will prepare kebabs offline. To organize a shape drive, you can use a motor from janitors, from a washing machine or any other by 12 volts. With the help of a pulleys and belt or toothed transmission system, the shaft rotation is transmitted to the skewers, and the meat slowly turns over coals.

Homemade Wi-Fi antenna

Such antenna will improve the quality of reception and the speed of Wi-Fi at your home. According to the reviews, after it is connected, the signal level rises from 5 to 27 Mbps.

For manufacture, it is necessary:

• metal sieve or a small colander;
• wi-Fi adapter (USB);
• USB cable;
• drill;
• epoxy resin;
• photo truck;
• plastic clamps.

Manufacturing process:

1. In the center of the sieve we drill a small hole (14 mm) and insert a metal pin to it to secure the adapter.
2. Insert the connector from the USB cable to the prepared hole and fix it with an epoxy resin. The USB connector after gluing should be strictly perpendicular to the sieve plane, then the device works more efficiently.
3. Then, with the help of two screeds, "ears" are made through which the cable is attached.
4. The product is fixed on the photographic report. Drills in the antenna hole with a diameter of 12 mm and clamp the nut.

Necessary materials Insert the pin in the drilled hole We glue a USB cable Fix cable Tripod Install an antenna using a tripod

Electric homemade garage

Consider several utility homemade projects for the garage.

Homemade chandelier

If you have weak light in the garage, the improvised chandelier will be very useful. For the manufacture of diving cartridge, a pair of angular cartridges, which are sold in a conventional shopping store are required.

Sequencing:

1. We are removed from the cartridges of the wire and fasten with a plastic screed. We get a cartridge into two lamps. It remains to be connected to the electrical network.
2. To do this, use the base from the luminescent lamp. Gently take the lamp, then we solder the wires from our design to the contacts of the base.
3. It is well insulated with them and attach the base of the cartridges.

The use of conventional light bulbs in such a design is undesirable - cartridges can fuse from heating.

LED device

An authentic LED lighting device can be another lighting option.

For its manufacture, you will need:

• old luminescent lamp;
• lED Strip Light;
• connecting wires.

Production sequence as follows:

1. On the case of the lamp is pasted into one or more rows of the LED tape.
2. Connecting wires are connected and the lamp switch is brutened.
3. The collected device is tested.

Dot welding machine

The desired device in the garage will be the homemade apparatus for point welding, the basis of which is the transformer from the old microwave. Prerequisite - the transformer must be worked to not rewind all windings.

The process of assembling the welder is quite simple:

1. A transformer is dismantled.
2. Secretly removed the secondary winding.
3. Two shunt are removed.
4. From thick wire (with a diameter of at least 10 mm), a secondary winding of two or three turns is performed.
5. From a copper rod with a diameter of more wires, electrodes for contact welding are manufactured.

Homemade point welding tool

Useful things do it yourself for fishing

Among the homemade can be found a lot of interesting ideas for use in hiking conditions, as well as on hunting and fishing.

Electronic alarm

An example is an electronic signaling device for fishing to a regular fishing rod or another tackle. A simple bunching device can be collected in just half an hour. It will take the old key chain and a filing and a strip of plastic with a thickness of 1-2 mm.

Animalizer assembly:

1. Keychain is attached to the rod.
2. The plastic strip passes on the fishing line and is inserted between the contacts of the keychain.

Now, when biting fish, the fish is drown, plastic crashes, the contacts will be closed and the key chain will work.

Underwater Camera for Winter Fishing

With the help of a homemade underwater chamber for winter fishing, you can see if there is a fish under the hole. And this simplifies the process of catching.

For the manufacture you will need:

• small chamber;
• hermetic box for the camera;
• small tv;
• car battery to power the camera;
• extension;
• inverter;
• lead for cargo;
• ultraviolet diodes for highlighting under the underwater shooting;
• superchalters, tape, sealant.

Assembly process:

1. Two holes make two holes at the top of the box. The extension cable is introduced through one. Through the second - the wire to which the camera is connected to the TV.
2. In the box, there are still a few holes in which the light bulbs are inserted. The wires from the light bulbs are soldered into one diagram (for example, with a parallel arrangement), which is connected to a power cable.
3. The holes are sealed with glue and tape for dense sealing.
4. The lead is melting and pour out small lumps of the elongated shape. Place them at the bottom of the box.
5. Customize the camera, connect to the cable. After that, it is neatly placed in boxing so that it has a clear direction forward and horizontally and passed a high-quality image. For stability, the camera around is plated with a soft material.
6. Torso is attached to the boxing (rope, belt), which will be lowered by the camera to the depth. For convenience, it is possible to connect it, and the camcorder cable with a TV with a TV to merge into one core, while gripping the tape.
7. Connect the power cable of the camcorder to the battery and test the device.

Homemade bait

A good bait for fishing can be made independently. This will be a device collected based on a simple multivibrator.

It will take:

• emitter of sound, for example, from children's toys;
• wires;
• a small plastic jar, for example, from under medicinal pills;
• electronic board;
• regulator with plastic rod;
• a piece of foam;
• batteries;
• loads for the float;
• volume control.

The bait assembly is carried out like this:

1. You need to solder the scheme and check it.
2. Two wiring soldered to the sound emitter. Then they are conducted on the body inside and connect to the board.
3. A regulator with a plastic rod is put in the lid from the jar.
4. From above on the board, a tight circle is installed from the foam, which separates the board from the battery.
5. In the lower part of the jars, weights are fixed so that the container is kept on the water as a float.
6. The regulator is set frequency and the sound changes.

Bait scheme - 1 Bait scheme - 2

Electronic homemakes for a car

Car enthusiasts create homemade with their own hands to improve the appearance and convenience of using the car.

Electrical Self-Protection

For the car perfectly suitable simple homemade electrical probe. It can show the presence in the voltage circuit of 12 volts. With it, it is checked with the serviceability of the relay, as well as light bulbs and other equipment. You can make such a device from a syringe and LEDs.

Assembly scheme:

1. Two LEDs sold out opposite conclusions (plus one to minus the other and vice versa).
2. To one of the steps through the resistance of 300 ohms is joined by steel probe. To another spike - contact for the batteries.
3. The design is inserted into the syringe so that the dipstick comes out of the hole for the needle. Most of the probe is isolated by PVC tube.
4. 4 LR44 batteries are inserted into the syringe so that one of the poles connects with the contact of the LEDs.
5. A contact from the flexible wire with a crocodile clamp is supplied to another pole.

On the video tells how to make a syringe tester. Shot by channel Ilyanov.

Light switch

Pretty simple in the manufacture of a smooth light shutdown scheme in the car's cabin. Such electronics suitable for any car. In parallel, a small board consisting of a capacitor and diodes sold out the terminals of the cabin lantern. The drop in electricity voltage will occur gradually and create the effect of a smoothly extinguished light.

Car subwoofer

To make a car subwoofer with your own hands, you must first purchase a speaker. From its dimensions, it is necessary to repel when calculating the size of the case.

The simplest and successful for the trunk shape of the subwoofer is a truncated pyramid with a slope like the rear seats.

LED fogthorn

With your own hands you can make automotive fog on LEDs.

For creativity it will take:

• two tenrative LEDs;
• 2 lenses from the old projector;
• gaskets from plastic pipes;
• lM317T microcircuits;
• resistors.

Assembly instructions DIY:

1. LEDs are installed on pre-prepared aluminum radiators.
2. The design of headlights, lenses from projectors, gaskets and diodes on radiators is collected.
3. The fog is powered through current stabilizers on LM317T chips and resistors.

Automotive carrying

Very comfortable car carrying is obtained from a computer USB lamp. It is compact and connect the device to any place in the car wiring.

Production scheme:

1. From the USB plug, delete contacts.
2. In the plug housing we connect the wires of the lamp and car clips "Crocodile".
3. For fastening in the right place (even horizontally), a magnet is put on the plug.

Ordinary toys from the store are no longer interesting to your child? Then, maybe it's time to do something with your own hands, especially this can be done with the help of girlfriend. We present a few simple examples with step-by-step photos, how to make interesting crafts at home. Take shame the child to work, it will probably be interesting to collect a toy on your own, and then he can also play with her.

Creating crafts with your own hands from the priests at home is a very exciting and interesting occupation. These are fond of both children and adults who enjoy this process and rest from the gray routine. For crafts, any artificial and natural materials can be used. Products organically fit into the interior, thereby adding innovation and originality.

• The best crafts from cardboard.

• Stand for a cup.

• From napkins.

• From wood.

• From salt dough.

• Frame from seashells.

• From socks.

• From plastic bottles.

• From polyethylene packages.

• From disks.

• From paper.

• Puzzle.

• Original crafts from fruits and vegetables.

• Funny products made of cones.

• Lamp.

• Holder for keys.

• Unusual cup.

• Unusual keyboard.

• Candlestick.

• Decor.

• From the tubes.

• From pasta.

• Master Class.

• Garden crafts.

• DIY DIY for kindergarten.

• Finally.

The most important "consumers" creative products at home are, of course, children. Try to interest the child with a joint activity, for example, during the holidays at the cottage, especially since the result will not wait. Collect the simple natural material together, which is in the surrounding in the area - flowers, stalks, branches, bumps, leaflets, and so on. Add a little fantasy to this ensemble - and you can make an original masterpiece.

Best crafts from cardboard

You can easily make various products from cardboard paper with your own hands with diagrams and instructions for all family members. This is an interesting and fascinating process that will not leave anyone without classes.

Stand for a cup

With the help of white ornamental small stones, you can make the original table under the cup. For this stones need to be glued together. This is quite a long and painstaking work, but the result is worth it. Such a stand can be used under hot dishes.

Unusual products from napkins

You can diversify leisure with a child with simple napkins. Children love to make something on their own, besides, it develops motility.

From wood

Tree crafts are more suitable for young men, as girls will be difficult to do it. Great leisure not only for boys, but also for their dads.

From salted dough

Products from the test with step-by-step video instructions for mothers and their children will bring a lot of excellent mood and emotion.

Frame from Rakushki

Make an ordinary wooden shells from a regular wooden frame. It is enough to glue the frame around the perimeter. Also, some shells can be covered with colorless lacques with sparkles for greater attractiveness.

From socks

Each house has socks, so we would like to offer some wonderful ideas from ordinary socks, and to be more accurate, then the toy. There are a lot of different options for products, such as bunny, snowman, bear, cat, owl, and so on. Fill such a toy can be litient, syntheps, cotton. Cropa is an excellent filler, because its use is developing motility of hands in children. Something to make children interesting not only to them, but also their parents.

So, for example, you can make a bright striped caterpillar. To do this, it will be necessary: \u200b\u200ba ribbon for decoration, sock, a marker for facet, thread, sintepon or cotton. Tightly pinch the product with filler, we sew one end or tie a thread. Speakingly divide your sock for five sections and tie a thread between each division so that the rollers of small sizes are obtained.

A part in which the goal will be, also tied up with a thread, and then a bow can be made from the ribbon and tie it on the head of the caterpillars. The muzzle is marker, and the surface of the pattern is embroidered with threads, it will give the volume caterpilla. So you will have a bright and cheerful caterpillar with the "Khokholcom".

From plastic bottles

Such surprises are suitable for older children, and although this troublesome occupation, but quite fascinating.

From polyethylene packages

Such wonderful crafts dad or mom from children will go for the new year, birthday and any other holiday. Exclusive and unusual gifts made of polyethylene with step-by-step instructions You can view below and choose something original for yourself.

From disk

Gifts to their mom's mom and grandmother's birthday. For this you need a little time. From such a wonderful present, they will definitely be delighted.

From paper

If you want to do something unusual of paper, then we offer several original and simple ideas. You can also make origami, there are many diverse options.

Puzzle

From the subwoofers, you can even create a developing puzzle. For this you need to take the same sticks from the ice cream and decompose them exactly along. On any paper picture similar size, apply glue and lean to the sticks. After the adhesive dry, cut the stationery knife into separate parts.

Original crafts from fruits and vegetables

Here are the best ideas from fruits and vegetables, and everyone can make such a masterpiece. This will be excellent leisure for children and their parents. So choose and enjoy a wonderful pastime.

Cool crafts from cones

Want to make a toy from the cones, browse the photos on which many original and cool ideas are represented.

Lamp

From autumn leaves and a simple half-liter can be created unusual and at the same time a beautiful lamp. To do this, you will need to select "golden" leaves and glue them from the outside of the can in such a way as not to leave empty lumen. The top of the banks we are taking the twine, in the middle you can put a small candle. If necessary, it is ignited, the bank will give a little golden twilight, so that the atmosphere of comfort will be created indoors. An excellent way to pass time along with the child.

Holder for keys

With the help of an ordinary tennis ball, you can make a funny and very cheerful keys holder. You will need to be placed with a marker of eyes on the ball and to push it with a knife, imitating the mouth. A metal bolt is inserted into the cut hole. Then the ball is stuck in the desired place.

Unusual Cup

With the help of a marker and cardboard, you can turn the usual cup of white in the art. To do this, you need to cut the desired image from the cardboard and lean it to the cup. Put a point marker around the stencil, then remove it. Lovely gift with your own hands your beloved day or March 8.

Unusual keyboard

The old computer keyboard will help to congratulate the original on the holiday. All letters need to be removed and glued on the ski, the color is chosen to taste. Then we insert the plate into the wooden frame, and the original gift with the instruction is ready.

Candlestick

You can decorate the room using a candlestick made by yourself. For its creation, two transparent glasses need the same height, but of different diameters. A smaller cup is inserted into a larger and fastened with glue. The space between the glasses is filled with water with food dye (color can be chosen any). In the middle of the candlestick, insert a sleeve candle.

Decor

DIY can be created from any girlfriend, even from wine plugs. You can make a heart that will serve as a decorative element in the room. For its manufacture, you need to draw a heart on a sheet of paper and lay out the plugs, gluing each.

From the tubes

Another wonderful idea is to use the tubes. Such small surprises will be pleasant as a gift to Grandma, mom or sister.

From pasta

What Russian people are inventive, crafts from Makaron, it is necessary. Want to make something unusual? Then take pasta. To this lesson, you can attract children of any age.

Butterflies from bottles

The theme of plastic bottles, as they say, is not fully disclosed. We offer to create original crafts with their own hands from the remedies at home. Beautiful butterflies will be "flushing" around the house, and for this you need accessible and simple things:

• tweezers;
• sedocks of plastic bottles;
• toothpick;
• butterflies templates;
• brilliant rhinestones, beads, sequins;
• marker;
• nail polish;
• scissors.

Getting Started:

1. On the Internet, you can download butterflies templates or cut out of the children's coloring.
2. Then cut the rectangles from the bottles of the same sizes, pre-delete the remnants of the glue and the label.
3. Attach a plastic rectangle to the image of a butterfly. Using the marker, circle the contours on the other side.
4. Gently start cutting the butterfly, do not forget about the delicate paws and mustache.
5. Decoration add to your taste. Use sequins, brushes and varnishes. Small lines can be drawn to the toothpick.
6. The initial side is filled with a black marker, after which cover it with a transparent varnish.
7. Now a beautiful butterfly appeared in your house, which you can give friends or decorate the walls, curtains.

Helicopter

Necessary materials:

• hairpin;
• little plastic bottle;
• three plastic tubes;
• scissors;
• ball.

We proceed to execution:

1. Scissors do a hole in the lid. Sut off the bottom of the bottle, cut the strip.
2. Cut the tube into small pieces (see in the figure) and connect them with each other.
3. Now individual parts of the helicopter must be assembled and copped with a stiplier.

Pirate ship

We will need:

• cardboard box;
• black cloth on sails;
• superchalter or gun with hot glue;
• wooden spanks;
• line;
• sticks of various sizes;
• pencil;
• rope;
• stationery knife;
• black marker.

We begin to make:

1. Cut the cardboard to pieces. On long slices need to draw a side side pattern of the ship. Remember that the nasal part must be slightly raised (see photos).
2. You will need two identical sides of the fuselage, two square parts are attached to the back, a rectangular cardboard strip on the bottom - front and stern - on the nose. It is necessary to cut shapes exactly with samples that are shown in the photo.
3. With the help of a superclone or gun with hot glue glue the side of the vessel. We wait until the housing is dry.
4. Then we glue the bottom, not forgetting that the ship's nose should climb a little up. Keep cardboard in this position until the glue is dry.
5. Now we are training a bent in the form of the letter L cardons, a foam piece in the shape of the letter C (equal to the size of the diameter of the stick) and the stick on the mast. The cardboard must be the size of the ship (measured inside).
6. Then we apply glue on a stick and fasten it at right angles to the deck of the ship. For greater stability, the mast is fixed by a piece of foam.
7. In order for the effect to be as realistic as possible, we attach a piece of sticks to the nasal part and connect with a mast with a lace.
8. Now we make two wooden skewers of the same sizes and secure them perpendicular to the mast, the same cord. We will give a sail on them. With black fabric, cut the rectangle, which should be a little longer than the distance between the skeins. You can decorate it at your discretion. Tie a sail to the mast.
9. It remains only to do a hole along the tissue and stretch the lace through it, tie it to the spanks (separately every hole).
10. Fresh the board (with which pirates and will force enemies to rush into the sea).

That's all, a pirate vessel annually to use, it can even roll the dolls around the sea!

Garden crafts do it yourself from healthy products at home

The time spent in the country can be brought together with the help of unusual garden crafts from girlfriend. Surround your country space and yourself with beauty and comfort, boldly using our advice. Let not only berries and fruits, and creative ideas ripen on your dacha.

Some of the most affordable and safe materials are the ultimate, these are plastic bottles. Who could imagine that unusual palm trees can be made from the secondary container. A couple of dozens of bottles, and in your yard "grows" a real tropical paradise for adults and children.

Ingenious and simple ideas literally scattered under their feet. This simple candlestick can be made from cement residues, concrete or gypsum.

Bottles covers will become excellent material for the original garden decoration.

Ordinary garden boxes with simple movement of hand will turn into stylish and cool boxes for all sorts of trifles, utility and pleasures. For example, if you want to make a gift to a grandfather or father by February 23, you can decorate their toolboxes. In addition, you can make a portable stool from the boxes, what is indispensable in the garden and fishing - the dad should like.

"Ballery" and old tires are a real treasure for realizing country ideas. Do not believe? Check out the video on YouTube on this topic - you will be delighted!

Simple crafts for kindergarten

As you know, kindergarten is a key step for the social development of the child. His visit is necessary for a comfortable perception of the world around us. In kindergarten they are engaged in children, teach them asam letters and arithmetic, and also develop creative abilities. Today, many children make various crafts from the primary means, ranging from salt dough and ending with paper. After all, it contributes to the development of the motility of the hands, the fantasy of the child. We present you the best crafts for children on different topics.

Hedgehog

Saden hedgehog can be used with a conventional cone. This Christmas toy will decorate the Christmas tree in kindergarten and bring a lot of pleasure to children in the process of working on it. Below you can view a detailed instruction how to make a pretty hedgehog.

You will need:

• plasticine;
• cone.

Progress:

1. A fritter is glued to the sharp part of the plasticine cones, it still needs to make the tip of the nose and eyes.
2. Now we make the paws, too, from plasticine. Thus, we have a spiny and very nice hedgehog.
3. Additionally, you can make the clearing, having blinding mushrooms and forming a piece of plasticine.

Paper tab

The most common crafts from paper are bookmarks. They can be done even with young children (from 4 to 6 years old). It looks very organically the fancy face of some animal. Below you can view a master class with step-by-step instructions.

You need:

• glue;
• colored paper;
• pencil;
• scissors.

Progress:

• Draw a square (20x20 centimeters) on a sheet. Divide into four smooth parts with a pencil. Now you have four squares of 5x5 centimeters.
• The lower left and top right squares are divided by lines to get triangles. The line must be made from the lower right angle to the top left so that they are parallel. The outer triangles are burned, they will not need.
• From the paper, cut out the figure, leaving the sections. Cut the upper triangle. If we put the paper smoothly, it will resemble a diamond with two glued triangles.
• Each triangle is twice and superimposed in turn on the rhombus. Pocket, who turned out as a result, is a bookmark. It must be put on the corner of the page, fixing it.
• You can cut the applique of colored paper and glue it into a pocket.

Of the flat stones of small sizes, you can make various bugs. To do this, it is desirable to be able to draw a little. Such a bug made in conjunction with the child will look great in a pot with flowers or on the shelf. To perform such a craft, you can view a full description with step-by-step instructions.

You need:

• scissors;
• pebbles, shape resembling a bug;
• colored paper;
• paints;
• glue.

Getting to work:

1. Cut out the base for the paws and the mustache and stick it under the bottom of the pebble.
2. With the help of paints, paint the stone in the form of a bug.

Christmas ball from macaroni

An excellent option for children in kindergarten - Crafts from Macaroni. There are many different options for macaron products, because they are available and exist in every home. So, for example, you can make a decoration on the Christmas tree - a ball. In the description below, you will be able to familiarize yourself with the detailed instructions, how to make it.

You will need:

• paint;
• balloon;
• pasta;
• glue.

Progress:

1. Inflation ball to the desired size and tie.
2. Then we apply glue to each macaronin, glue them with each other.
3. After a small billet made of several pasta is made, attach it to the ball (for convenience you can fix the billet with the PVA glue by sticking it to the ball). We glue the whole ball on the same scheme, with the "moment" glue, the process will be somewhat faster, but if the exercise is performed with the child, it is recommended to use PVA.
4. After everything is dry, piercing the ball with a needle and pull it out through the hole, you can now do the remaining pasta.
5. Fake a ribbon or rope so that the christmas toy can be fixed on the Christmas tree. You can also paint the ball, and you can leave it in original form. This cracker can be done with a child from 5 to 7 years.

Butterfly

One of the simplest products made of paper napkins is a butterfly. Even three-year-old children will easily cope with such work. In this article we will tell you what you will need to easily cope with it. Butterfly made by her own hands will delight the child, and the most important thing is that it can be fixed anywhere.

Necessary materials:

• scissors;
• napkins;
• flomaster;
• colored paper;
• trailer.

Progress:

1. Wanted napkins of two different colors and sizes. Fold them on each other, a large napkin from the bottom. In the middle, do the hole.
2. Put the napkins on the clothespin, which serves a torso.
3. Draw on the cluster the face of our beauty, and with colored paper, make a mustache, then attach them to the clothespin. Our beauty butterfly is ready!

Plasticine cow

The kids of younger groups can be suggested to create God's cow. Crafts from plasticine can develop a fantasy, as well as motor skills. A cool cow is designed for children of 7-10 years, which can be loosened with their own hands. To perform such a cradle, we advise you to view our master class with detailed instructions.

We will need:

• white sheet of paper;
• plasticine (white, black, red);
• a pen;
• plastic cover 10-12 cm in diameter.

Getting Started:

1. From red plasticine, stick the torso, from the black - specks. Also black plasticine is needed for head and paws.
2. Take a transparent plastic lid and draw a flower on it, in shape resembling chamomile.
3. Under the bottom of the covers, lay a white sheet to see the outline of the pattern. Then, along the contour of the pattern, creek the flower with various colors of plasticine.

Octopus

Woolen threads can be used as a material. Of these, they will get an octopus who will love the baby very much. Such a craft is very easy to do, and it does not take much time with you. You can view the master class to do everything yourself.

We need:

• scissors;
• woolen threads (sixty threads of 35 centimeters and a little more for tying);
• colored paper (for eyes), or you can buy ready-made in the store;
• little plastic ball from which we will make your head;
• ribbon.

Procedure:

1. Take the chopped threads and fold them together, tie out the thread in the middle, after which to put the ball on it. Wrap a thread around him, tolding them under the ball. It will be the head of our octopus.
2. Of the remaining threads, glower pigtails in the form of tentacles.
3. Use purchased eyes or draw yourself on paper, cut out and stick to your head.
4. Tie a ribbon on the head, it will serve as an excellent decoration. That's all, our octopus is ready!

Chipollino

Use vegetables and fruits for children's creativity. From the repressed sprouted onion, you can make chipollino. Such a cannon is easily carried out by children for 3-5 years. Below is a detailed description.

We will need:

• plasticine;
• a small head of the reptile onion;
• markers;
• jar (neck diameter should be less than onions);
• glue;
• scissors;
• colored paper.

Progress:

1. Draw felt-tip pen on the bulb of the cheek, mouth, brow, and make a spout and eyes from plasticine.
2. Follow the jar with paper and draw the body of the cartoon hero on it.
3. Insert your head to the jar. So it turned out very pretty chipollino.

Vase

Another wonderful way to use unnecessary plastic bottles is to make a vase. An ordinary bottle can be transformed into a decorative visa with a cute cathe chick or any other animal. The best deal for the child with their own hands with a detailed description and step-by-step instructions is presented in this article.

You need the following:

• scissors;
• plastic bottle;
• marker;
• sponge (for painting);
• paints.

Progress:

1. Cut the bottle in half, for the craft you will only need the bottom part.
2. Cut in such a way that the edges are smooth, leave two triangles who will serve as an animal ears.
3. With the help of a sponge and white paint, fracture our workpiece.
4. Nose and triangles on the ears paint the tassel in pink color.
5. The marker is drawing a face of kitty.
6. Our vase is ready.

Material for such a craft can serve as a small plastic bottle (0.5 liters). The toy will delight not only children, but also their parents. To figure out how to make it, let's see the instructions.

You will need:

• scissors;
• plastic bottle of 1.5 l and 0.5 l;
• paints;
• colored paper.

Getting to work:

1. You need to paint a small bottle with the help of paints or stick yellow paper on its surface.
2. In the same way, make fatty black lines on the bottle.
3. On the paper cover cut the eyes, mustaches, the mouth of the future bee.
4. Wings cut out of a large bottle and glue them with the help of glue on the little one. As a result, a pretty bee is obtained. Excellent idea for a joint pastime with a child.

Finally

Increasingly, in many houses, you can find crafts performed by your own hands from the remedies at home. Many of them serve only with elements of the decor, but there are also those that have a very useful, practical purpose. Baby crafts allow the child to develop, knowing the world around. They can be made from different materials, for example: leaves, plastic, plasticine, paper, wood and even eggs.

Each owner of the housing wants to feel as comfortable as possible in it. This becomes the reason that the desire to issue an interior is not only beautiful, but also original.

However, often funds are not enough for this, because the services of professional designers, like beautiful things, are not suiced. Therefore, in recent times, an increasing number of homeowners prefer to independently decorate the interior of the house with the help of crafts from remedies that are characterized in low cost.

It is worth noting that the main advantage of such crafts is not at all low cost of materials. The most attractive circumstance is that each thing you create is unique. But it is the uniqueness of the design that attracts attention.

From products that have been created personally, special energy occurs. And thanks to this, the house appears atmosphere comfort and heat.

An important circumstance is that such structures can act only in the role of ordinary decorating elements. With their help, you can make much more convenient to organize space. After all, they can be used to store a variety of trifles that are necessary for the economy.

Do you think it is impossible, because you need to have any special skills? No, even a child will cope with this work to create crafts.

Pay attention to the photo of the crafts from the subwoofers, which is presented below. It depicts an example of creating a key, which is not only a beautiful interior addition, but also serves as a small hanger for keys.

And the process of its creation does not differ in difficulty. Consider it in more detail.

Hanger for keys

Surely, many familiar situations when to search the keys you have to raise the whole family. After all, often people do not burden themselves with the purchase of special small shelves for storing keys and other small things.

And since the key is quite small items, losing it among larger things easily. To get rid of the need to constantly find the keys, many stored them in her handbags.

However, we can offer you a more interesting and original storage method. And for this we will build a key.

Her main feature is that externally it will resemble a product decorated with brick masonry.

On how to make a craft in the form of a keysticker from the primary means, we will tell in stages. But for starters, consider which tools and materials will be needed for its creation: a dense sheet of cardboard or plywood, dense napkins, hooks, glue, varnish, paint.

Stages of execution of the key

At the first stage you need to cut the rear wall of the future key. As a material, you can use both dense cardboard and not too thick pieces of plywood.

At the second stage, you should cut small rectangles from cardboard that will mimic brick. Please note that they must have the same size.

At the third stage, you must stick the carved "bricks" to the base with glue. Remember that there should be a small lumen between them. And also one should not shock the entire surface of the product. Indeed, in the central part there must be a small sign with the inscription, and at the top of the picture.

Note!

At the fourth stage, you should start lubricating bricks with glue. Do not comprehend at this stage of glue, because it is necessary in order for you from above to him a crumpled napkin. From above, it can also be covered with a small layer of glue for better impregnation.

With the help of a stick or back side of the brushes, press the napkin into the gaps to form angles. Leave the product to push.

Please note that any crafts from undergraduates at home should be durable. Therefore, we strongly recommend not to save on binding materials.

At the fifth stage, the process of creating visual similarities with natural brickwork begins. As soon as the panel is dry, cover her paint. Seams need to cry for bronze paint.

On the sixth stage, you should cover the bricks of paint a second time. However, this time you need to use a dry brush. To do this, dry it into the bronze masonry, wipe on paper so that it becomes dry and after that again dip in the color you painted bricks.

Note!

Remember that to achieve maximum similarity, it should be brushed in only one direction.

At the seventh stage, which is the final, you should cover the finished product with a transparent varnish and attach the hooks on which the keys will hang.

Crafts for the nursery

If you are the owner of a country house, then for you the decoration process is not limited only to the housing area. Therefore, to find the territory around the house, the garden crafts from prior art should be used, which will decorate any garden or garden.

For their manufacture you can use plastic bottles, hemps, tires and old soft toys. In this case, it all depends on what kind of tools and materials you have.

Tire crafts are greatly popular, since they are quite simple to create them, but at the same time they look original and interesting.

Note!

For example, you can create a real cup from the tire, which will become a wonderful flower bed. To create it, you need one tire, a round board (the diameter of the board must be more tire), paint, a small segment of rubber.

The tire and the board must be painted in that color you like. If you have an artist's skills, you can use them in order to decorate the product with beautiful images.

In the event that you do not have any drawing skills, you can paint the design into one color or polka dot. The handle of the cups should be fixed with a large stapler. And here your product is ready.

We draw your attention to the fact that even children's crafts from priests can be a decent decoration of your garden. Use crafts of babies that they made from plastic bottles and cups. Despite his simplicity, they look rather original.

If they are small, use them to decorate the porch or window sills. Thus, you can make accent on them, and they will not lose on a large garden area (garden).

Photo of crafts from girlfriend