What is a mounting kit of heating radiator and why the prices of mounting sets differ so much. Armature and components for heating radiators What is included with cast iron radiators

Installing the heating devices in their home will help the mounting kit for the heating radiator. But those who are first installed heaters are wondering. Why are prices different? The fact is that they confuse the mounting kit for the heating radiator and the installation kit are two different things. The latter includes plugs, valves, adapters. And the mounting kit for the radiator is all that, without which you simply do not put your radiator to the selected place.

Compound

Usually batteries are installed under the window - in the middle. But in each room - its distance to the pipe from corner coolants. It is the mounting fittings for the heating radiator that will correct this situation. It usually includes:

The main problem is that sometimes the incompatibility of the heater and fittings. Therefore, when buying, you must immediately purchase and the mounting package for this type of product and in accordance with your installation size.

Varieties

Depending on what housing you live (multi-storey apartment house, a private house etc.), acquired accessories will depend on. She may be:

With a diagonal connection.
One-sided.
Lower connection.

From the diameter of the product pipes will depend on the diameter of the connection accessories.

For mounted radiators

For attachments of products, different brackets are used - pin, brackets or corners. IN wooden premisesTypically, only corners are used. But before making your radiator, you must already have the necessary mounting kit to connect the device to the heating system. And only then waters the unit to the selected place. If you act from the opposite, you will have to pick up and search for a mounting kit for the heating apparatus. And when connected, unforeseen leaks or malfunctions may occur.

Crane Maevsky

This element of the mounting kit is used to reset the air from the radiator. When the heating device ceases to warm, then one of the reasons for this is an air accumulated in pipes and radiator, which is necessary from there to oust. To do this, use the crane of Maevsky, which should also and in composition and diameter correspond to the product. Usually it is made of brass. And it is enough to just open it for a while in order for the heating system to start function again.

Many manufacturers already produce radiators along with such a valve. When connected it must be preset.

The standard package for installation does not include a number of elements, without which it is sometimes not to cope with the installation. They are acquired separately. Such components include:

Sealant (mainly for silicone batteries).
Hemp or Fuma tape (for tightness).

And depending on priorities:

Easy acquisition

So that when installing, installing and connecting the radiator there was no confusion, superior components or missing parts of the kit, manufacturers have provided target mounting kits for specific radiators. They are called - "Mounting Kit for the Radiator" and its name. Therefore, it is better not to customize then under the threads of adapters and valves, but to purchase a mounting kit to the heating apparatus you choose. Material, manufacturer, brand is all your taste. You can also resort to the advice of specialists or those who have already installed their own heating device with their mounting kit.

- installation instructions!

Bimetallic heating batteries are among the most modern and rapidly gaining popularity of aggregates (also on our site you can read how to make a decoupage of the battery with your own hands.). Apply more often than their analogues from cast iron and aluminum. Materials used for the manufacture of such batteries allow you to obtain aggregates capable of withstanding very high pressurewhat makes them safe and effective application in urban heating systems.

Bimetallic radiators Heating

Bimetallic heating radiators are an excellent alternative to batteries made from other materials. Work on connecting radiators from bimetal requires maximum attention and knowledge of a number of important nuances, without taking into account which you can not count on high quality Installations.

Bimetallic heating radiators

Preparation for the installation of bimetallic batteries

Before starting work on independent connection Bimetallic radiators should collect all the necessary devices necessary for such an event so as not to be distracted by their search in the future. Usually included with the battery there is a special mounting kit that allows you to perform work in as soon as possible. A number of necessary elements are included in such a kit, among other things, there are also brackets intended for fastening the battery to the wall.

Set to heating radiators bimetallic

If, before that, similar batteries were installed in the apartment or house, the use of used brackets is allowed. It is only necessary to make sure that they do not break out and did not rust. However, only a qualified plumber can competently perform such diagnostics, so it is better not to spend time and use new mounts.

Additionally purchased pipes and related elements if they are replaced. Most often old steel tubes change to lighter and generally superior in their characteristics pipes from reinforced polypropylene.

If possible, all reinforcement, fastening and other products must be high quality. From this directly depends on the reliability of the connection and the system life in general. To connect one bimetallic radiator, you must buy a minimum of 2 cranes. They will allow you to completely disconnect the battery. Additionally, you can purchase and install 1 crane on the jumper and battery. With the help of such additional cranes, you can control the heating intensity.

Pipes and fittings

For the most accurate setting of the temperature mode, it is recommended to install a special thermostat.

Installing and connecting bimetallic radiators is performed using a whole set of various devices. Prepare them in advance so as not to be distracted later.

Set for installation and connecting heating battery

1. Battery and factory mounted kit.

3. Level.

4. Dynamometric keys.

5. Pencil.

6. Electrode.

7. American women.

American

Methods for connecting batteries

Connecting a bimetallic battery with your own hands can be performed using several methods. To select the most optimal, it is necessary to study the characteristics of the existing system, specifically - pipe wiring.

Diagram of connecting radiators

From how the pipes are placed and a layout is made, the method for which heating units will be installed to the greatest extent.

The layout can be a single-tube and two-pipe. Using one-pipe scheme Water movement to radiators will be carried out on the feed pipe. In the course of its movement, the coolant will cool. Thus, in essence, the feed pipe in this scheme "becomes" inverse. Batteries are placed sequentially.

Radiators connecting schemes

If the installation is performed according to a two-pipe wiring, the batteries are connected in parallel. With such a connection, the feed and reverse tubes do not affect each other's work.

Modern models bimetallic heating batteries You can connect virtually any way.

Connecting a multisective radiator is better to carry out a diagonal method.

Factory equipment must necessarily include the crane of Maevsky and the plug.

Typical battery installation methods

An option with one-sided connection is best suited for apartment buildings. In such buildings, as a rule, the system with an attic layout is placed. Such a connection allows you to achieve almost 100% efficiency, but imposes your restrictions on the permissible number of radiator sections - there must be no more than 15.

If the battery has more than 15 sections, the connection is carried out diagonally, i.e. The battery is connected from above and below different sides, focusing on the coolant.

When connected via such technology, it is possible to achieve uniform warming up of all battery sections and provide a practically passport amount of heating.

However, if the heat supply is organized by one-tube technology, the diagonal connection can be extremely uncomfortable. In such conditions, water will consistently pass on each battery, losing most of the temperature indicator on each site. Therefore, to such a connection method is better to apply exclusively when connected by method two-pipe layout.

There is also an option with a double-sided lower connection, but it is better not to use it, because With this method, the recoil of heat energy decreases at least 10% of the values \u200b\u200bdeclared in the passport. But quite often, especially when arranging heating in own homeThe sole possible option It remains that connection. In the case of bimetallic aggregates, heat loss succeeds noticeably reduced due to good indicators of thermal conductivity of manufacturing materials, which is an additional plus of such heating units.

Important nuances Mounting radiators

All other things being equal, the diagonal connection of radiators is the most optimal option. In particular, this method is suitable in those situations when the batteries from a variety of sections are connected.

Practice shows that it is better to install a number of 2 batteries for 6 sections, rather than 12.

The lateral version of the connection does not have significant differences from the diagonal technology if the unit is installed, consisting of a relatively small number of sections. The diagonal connection begins to exceed all other options in cases where the unit consists of more than 6-8 sections.

Special attention should be paid to the paintwork, which was applied to the finishing of the bimetallic battery. In the process of installation of the unit, be careful not to spoil the coating, otherwise in the future it will get off very quickly.

All scratches and other damage are needed in the shortest possible time to lure such a paintwork in order to prevent further expansion of damage. Better to buy in advance suitable finishso that you do not waste time on her searching, because self installation Batteries rarely passes without damage.

It is strongly recommended to armared the support and help of an experienced specialist who will ensure that there is nothing damaged during the battery process. In the absence of such a possibility, be extremely neat.

Cellophane, which products are turned around, it is recommended to shoot only after the complete setting and connecting the unit is complete.

Battery Connection Guide

Work on the installation of such aggregates begins with the selection suitable diameter Podding pipes. It is done simply - it is enough to measure the diameter of the pipes in the existing system and acquire a suitable installation set. When buying a battery, make sure that the mounting set is complete.

Composition of battery connection

1. Adapters.

2. Brackets.

3. Air dust valve.

4. Gaskets.

5. Cork.

Prepare a container to collect water. Discharge water supply and drain the fluid from the heating system. Split threaded connections pipe old battery And dismantle the radiator.

Prepare a container to collect water

Make marking indicating fastening points. Take new battery, attach it to the appliances and apply the placement of brackets. At this stage you will need a level with which you can make sure that the installation is horizontally, as well as a marker or pencil for applying labels.

Marking on a wall for installing heating radiator with your own hands

Drill holes in marked points. Use a dowel to fix brackets. If your radiator has less than 7-8 sections, the mount can be performed using 3 brackets, and if the sections are larger, the fasteners should be 4.

Installation of heating batteries in the apartment

Install the assembly to the brackets. The installation must be performed so that the horizontal collector is located on the hooks posted. Additionally, you need to know that the main nuance of the installation of bimetallic aggregates is the fact that it is possible to remove the protective cellophane after the device is installed and verified.

Perform the Maevsky valve mounting. It goes in the mounting set.

Perform the installation of the Maevsky valve

The valve is tightened with the tool called a dynamometer key. This tool will allow you not to proceed for the allowable voltage.

At the end, it will remain only to install shut-off and thermostat products, then connect the battery with the heating system.

The locations of the connections can not be cleaned with a file and sandpaper, because The result of such treatment can be the appearance of leaks.

Thus, the installation of bimetallic radiators, although it is a rather complicated event, but you can cope with it on your own. Follow the instructions and remember the recommendations received at each stage of installation. Good job!

The established bimetallic radiator will delight you and your pets

Read also an article - a thermostat for heating radiator.

Video - Bimetallic heating radiators

svoimi-rykami.ru.

Connecting heating radiators: process features

Connecting heating batteries - a process that is necessarily produced in a new house. Yes, and in old apartments and country cottages Many today make the replacement of outdated radiators of heating to newer, thereby increasing the efficiency of work and heat transfer.

Methods for connecting heating radiators to choose with extreme care. The fact is that it is the installation scheme that significantly affects the functionality and efficiency of the system in general. At the same time, the wrong installation will lead to an increase in pressure, difficulty adjusting the temperature and deterioration of the interior.

Radiator heating indoors

Methods for connecting batteries

Currently, connecting the heating radiator can be performed in several main methods:

Tip: If large heating radiators are installed in the house with the number of sections 12-24, the diagonal battery connection system will be the perfect choice.

Radiators of heating with lower connections. With this option, the efficiency of the heating system is quite sharply reduced. But, at the same time, the heating radiator with the bottom connection will look beautiful in any interior, because all the wiring of pipelines is made hidden. Before starting installation heating radiators A fittings must be purchased for connecting heating radiators with lower connections. As a rule, the composition of such connections includes a variety of ball valve cranes and devices. If you know how to properly connect heating radiators and perform all the work with your own hands, you can achieve high heat transfer rates, reduce heating costs. At the same time, the bottom connection looks great in any interior;

Lower connection of radiators in the heating system

Side options for connecting heating radiators. The most common way to organize a heating system, which can be found in any house. The instruction involves connecting pipes only to one of the sides of the battery.
Before connecting heating radiators, it is necessary to ensure the presence of vertical risers or arrange the feed pipes higher than the batteries. Only so can be achieved natural circulation Waters, having done so, the price of heating will be much lower.

Side connection batteries

Kit for connecting heating radiators

Before connecting the heating radiator and, at the same time, provide proper execution The process must necessarily have a special radiator reinforcement. Of course, some of the products come complete with heating devices, but everyone else will have to acquire separately or in special sets.

In many photos and videos in specialized stores, you can see that there is now pretty big choice Sets for connecting radiators. As a rule, such collections are universal, suitable for lateral, lower or diagonal mounting Heating batteries.

In most cases, any standard set for connecting radiators includes a certain amount of products:

Thermostatic heads, all kinds of thermopeli and thermostats, due to which the temperature regime is adjusted;
Shut-off cranes and cranes of Maevsky;
Plugs and other devices for quick and efficiently connecting heating radiators in the house.

Kit for connecting heating radiators

Select a specific radiators connection scheme: what to pay attention to

Based on the fact that each diagram of connecting heating radiators in the house or apartment has its own characteristics, one can say about the need to select it for certain conditions. It is very important to take into account before the start of work, in the end, do not encounter extra financial costs.

So, for example, if we consider side connection Batteries, then its value is somewhat lower than the other options. This is due to the fact that the flow consumption is much smaller. it optimal choice For apartments in apartment buildings, as well as small cottages with an autonomous heating system.

At the same time, the diagonal connection of the batteries is ideal for one-storey houses. In addition, this was stipulated above) This connection scheme allows the use of radiators with large quantity Sections, which is very convenient and makes it possible to effectively heated even the most surrounding rooms.

Well, as for the lower connection of heating radiators, this scheme will perfectly fit into any interior of the premises. The thing is that when lower connection Batteries can be well hidden a variety of pipelines, thereby, at all without clinging the room with superfluous objects. The only "but" is the price of heating devices with lower connections.

Radiator with side connections in the interior

Conclusion

The correct selection of the heating batteries in the house is the key to the efficiency and quality of the entire heating system as a whole. Of course, at present, in the domestic market, you can find a huge variety of a variety of radiators, each of which is distinguished by its characteristics and connection capabilities. But it should be proceeded from the choice of operating conditions, as well as features of the premises.

Compliance simple rules selection of the battery connection scheme, as well as making installation with high levels Quality will ensure excellent thermal conductivity of the batteries, create a certain atmosphere of heat, comfort and coziness in the house or apartment.

Page 2

As part of the article, we will look at the types of heating batteries producing factory and those heating devices that can be made with their own hands. We are interested in both the device of radiators and their key properties - negative and positive.

Let's start with, so to speak, self-conceived.

In the photo - only three types of radiators. However, they are much more.

Independent manufacture

How do you make a heating device?

The instruction is simple, but implies the presence of you welding machine And the ability to cook hermetic seams.

The pipe with a diameter of 50 - 200 millimeters is cut on the required length. Affective thing, the thicker the pipe - the more its heat transfer will be.
It is burning or drilled by holes, after which jumpers from smaller diameter pipes are boiled.
Additional jumpers provide structure stiffness.
The ends are silent. If necessary, the upstream faucet is optional for resetting the air, below - for flushing.

The jumper configuration should circulate the coolant throughout the volume of the heating device. The resulting design is called a register and is used for heating garages, greenhouses and other premises, where aesthetics is unimportant, and the need for warmth is significant.

Useful: when the register pipe is located on the vertical, one above the other with an increase in their number thermal power It grows nonlinearly. The higher the register pipe is located, the less the temperature delta between the coolant and the surrounding air: the bottom-heated stream is already heated below.

Accordingly, the less heat heat carrier will give.

Key features of the registers flow out of how they are manufactured:

Maximum strength and resistance to temperatures. It is the registers that use for heating production premises overheated steam.
Minimum price. There will be several pipes, a couple of valves and a pack of electrodes.

The register is unsurpassed by cheap heating.

Factory production

Here the choice of options much more. Different types The heating batteries are differentiated both in the form of the heat exchanger and the material.

Convectors

The basic design is simple: the turn or several turns of the pipe, which to increase the heat exchange surface, transverse plates are pressed.

As usual, the evolution of this type of heating devices was on the path of complication of the structure:

There are convectors with a copper tube and aluminum fins around it. The thermal conductivity of these metals is much more than steel, which makes the design more efficient when small sizes.
Another way to increase heat transfer is an installation on a heat exchanger of a low-power fan. The resulting design is called Fan Coil.
To adjust the heat flux in the first convectors, the simplest flap was used, which limited the air flow. The current convector is often supplied with thermostatic heads.
Heat exchanger fins front closed with a decorative screen.

Convector:

Durable. Several turns of the pipe, remember?
Compact with excellent heat transfer due to a large surface of fins.
The appearance of most of the heating devices, let's say, on an amateur. A simple white plate facing the viewer will please not every designer.

Modern convector.

Plastic steel radiators

Two steel sheets with a typical thickness of 0.8 millimeters are profiled and soldered together. Water circulates through the moves between them.

Key features:

Compactness. The plate mounted close to the wall almost does not occupy space.
Little service life. Steel and water are a bad combination; Thin steel is extremely bad. Plates have to be changed no later than 7 -8 years.
Small heat transfer. The area of \u200b\u200bcontact with air is equal to double plates. There is no additional fins on it.

Cast iron radiators

Sections are cast out gray cast iron and have a rather large internal volume. They are going on nipples with bidirectional threads; Tightness provide strips from a paronite - a rigid heat-resistant rubber.

The appearance of radiators is familiar to each of us since childhood, but the features of these heating devices are not known to everyone.

Cast iron heating batteries often need flushing. A large inner section means a slow motion of water in them and, as a result, rapidly graining.
They are very massive and can only be attached to the capital wall.

However: You can find cast iron radiators with legs that are installed on the floor.

Typical disease - flow between sections when cooled at the end of the heating season. It is treated with a bulkhead with the replacement of pads.

Sections can have one, two or three channels.

Aluminum radiators

The thermal conductivity of aluminum together with developed fins provide excellent heat transfer; In addition, these batteries are simply beautiful. They will not spoil the design of the room, rather the opposite.

Features aluminum radiators Speun from the properties of the metal used:

They are afraid of hydrowards and generally large pressure. Aluminum is still not very durable.
With copper aluminum forms a galvanic pair: in water with inevitable salts between the copper water supply and aluminum heating battery, there is a constant flow of ions, which leads to the rapid destruction of the latter.
In the process of the inevitable water electrolysis, some oxygen is distinguished in this case, which is dissolved in the coolant, and hydrogen, which accumulates in the radiator. Manufacturers strongly recommend using automatic air.

Bimetallic radiators

They are the evolution of aluminum: inside aluminum fins there is a steel core. As a result, we change limited strength and chemical instability to corrosion.

It must be recognized, extremely slow: steel with increased corrosion resistance are used.

Features bimetallic batteries Heating:

Highest strength. The best samples are calculated per 100 atmospheres of working pressure.
High price. It comes to 600 - 700 rubles per section.
Beautiful heat transfer. Possessing aluminum fins, the types of heating batteries can boast of heat transfer in 180-200 watts per section of the standard (50 cm) size.

Bimetallic radiator outside and from the inside.

Conclusion

Additional information O. different types Heating devices you can, as usual, find in the video at the end of the article (read also about the properties of vacuum radiators of heating).

otoplenie-gid.ru.

Fittings for heating radiators: varieties of connecting elements and installation features

Installation of the heating system is carried out with the help of special connecting elements - fittings. They have several variations that we will consider in detail in this article. Additionally, we also tackle the features of their installation.

Set of fittings for heating radiators

Purpose

The instruction involves the use of fittings to solve the following tasks:

Main transition to another diameter. Especially often this situation occurs when the new wiring is connected to the old one.
Creating a branching system. Allows you to direct the heat carrier in different contours.
Connecting pipes to the battery. Creates a reliable removable or unloading connection.

Connect the radiator with your own hands

Connect pipes with each other. Collects the pipeline into one.

Compound copper pipes Couplet

Directly the radiator connection itself looks like this:

We mount the brackets on the wall using the perforator and hang the battery on them.
Install the fittings on the radiator.

Tip: Feed the heated coolant to do below. In the reverse case due to the fact that hot water rises up bottom part The device simply will not warm up.

So, we dealt with the functions, now we will understand which fittings are needed to connect the heating radiator.

Varieties of connecting elements

Tip: Do not save on the components of the heating system under consideration. Although they may seem insignificant, it is on them the greatest load.

Fittings for connecting heating radiators are the following types:

Type number 1: Coupling

Photo of brass couplings

These are the most simple elements that allow you to create an elementary connection of the pipe with the input in the battery in the event that their diameters coincide. The price of such details is the lowest.

Various components for heating radiators that are necessary for fastening heating radiators, as well as their connections, - pads for heating radiators, eccentrics for heating radiators, reflecting the screens behind heating radiators and much more - are not included in the base kit. Therefore, they will have to be purchased in an independent way. Choosing a heating radiator bracket, you need to be guided by such a calculation that one fastener for heating batteries is necessary for 3 sections of the radiator. The heating radiator must be located exclusively horizontally.

If you use a good kit for connecting heating radiators and perform all the work with allocations associated with the fastening and installation of radiators, then heating system It will work with maximum efficiency and reliability.

The effectiveness of the heating system depends largely and on whether the type of heating radiator and reinforcement for the heating radiator is chosen correctly, including the heating radiators connecting nodes.

Heating radiators can be divided into two main groups: sectional radiators and panel radiators. The first can be bimetallic or made of aluminum, but panel radiators are made of steel. In case of sectional radiators Usually use the connection of lateral or diagonal type, but for panel radiators Used the side or bottom type connection. For all this it will take different fittings for heating batteries and consumables (For example, sealant for heating radiator).

Connecting heating radiators

The choice of a heating battery connection scheme may depend on the following factors (and shut-off valves for heating radiators will depend on it):

Floor at home;
Type of heating radiators, as well as their dimensions;
Type of heating system: single-tube or two-pipe;
The head of the coolant in the heating system.

Heating devices can be connected by one of three schemes:

The diagonal connection scheme assumes that the water is on top, and it comes out from the opposite side. Such a scheme is usually used for private houses where multisective type batteries are installed. The scheme can be used not only for one-tube, but also for two-pipe heating systems. Such a connection scheme cannot be used in those heating systems, where the working pressure is high.

IN multi-storey housesMost often occurs a side diagram of connecting one-sided type. Such a scheme is suitable for those heating systems that use a coolant with quite high temperatures. In the case of connecting such a scheme, water will come on top, and breaking down, but on the same side.

The low-type diagram of the connection is used for such types of radiators in which the connection is the bottom type. In this case, the entire heating system is hidden under the floor, since the pipes of the heating system go to the floor. The battery length does not play any role if you choose this type of connection, as the battery will be heated by a uniform method.

Depending on the selection of the connection scheme or the type of heating radiators, it will be necessary to select a specific mounting kit where the fittings and components will be included, for the heating batteries.

The standard set of heating batteries includes such components as:

Plug;
Threaded plug;
4 Fortors;
Bracket for heating batteries, fastening of heating radiators;
Gaskets for radiators of heating from a paronite or silicone.

Adapters are usually included in a set of pairs, with the right and left thread under the external type tube.

They screw in the heating battery on the left and right side. Internal type thread under the valve for heating radiator and taps for heating radiators is the same in all adapters.

Maevsky's crane is useful in such a situation when heating radiators cease to warm the room due to the fact that air has accumulated in them. To return the radiator to its former performance and efficiency, you just need to open a crane. Usually, such a valve for the heating radiator is made from such a material as brass, and has a chrome-type coated.

The threaded plug is needed to ensure the sealing of all threaded holeswhich diameter is one inch. In order to compact the nipple connection of radiator sections, various gaskets are used.

In order to fix the heating radiator on the wall, you need fasteners for heating radiators.

Brackets can be an angular or anchor type. Pin brackets can be used for any kind of walls, but for wooden walls You can use only angular brackets.

Sometimes gaskets can be included in the mounting kit, which are installed between the wall and the heating radiator. If the circuit includes such a component like bypass for heating radiators, then such a jumper on the heating battery will adjust the battery temperature. You can use the thermostat, the thermo sensor on the heating battery or insulation for the heating radiator, as well as the meter on the heating battery, however this method More expensive.

Select a set for connecting the heating radiator

The diameter of the pipe tubes plays an important role when choosing a mounting kit. Halfall kit is suitable for polymer pipes with a diameter of 16 and 20 mm.

If you need to connect panel batteries from steel with a lateral type connection, then you will need to buy only the plug and crane Maevsky. Sets of standard type for connecting radiators are not required, since such radiators from the bottom and the upper side already exist internal thread with a semi-leaf diameter. Due to the presence of such a car thread, you can screw off immediately without adapters.

No need to forget that these consumables may be needed as: sealant for heating batteries from silicone, fum-tape or hemp. Usually such materials are not included in the base kit.

Also, they often put heat-reflecting screens for heating radiators. They are designed to increase efficiency and heat transfer. The heat reflectors for heating batteries are made from foil, foam, porcelays with foil. Reflectors for heating radiators should be made of such a material that has a low thermal conductivity coefficient. If your heat screens for heating batteries are only foil, it will give part of the heat of the wall. Therefore, you need to make a layer. Reflectors for heating batteries can also be made from rolled foam.

All reinforcement for heating battery, components and additional materials- jumper on heating radiator, collector for radiator heating, tubes for heating radiators, the evaporator on the heating battery, the fan on the heating battery, the dryer on the heating radiator and much more - the same integral elements of the heating system. Without them, she would not work so effectively.

If you do independent installation or replacing heating radiators, then in addition to the main designs, you need to purchase additional components. In order not to acquire all the elements individually, you can buy a ready-made set for heating radiator, it has everything required for work.

In this review, we will tell you what types of sets are and what criteria to pay attention to when choosing to purchase a qualitative option.

How to choose the best option

First, you need to know what diameter of the pipe will be used, for thin-cutting options, a set for a radiator 1 2 is used, a variant ¾ is used for pipes with a diameter of 16-20 mm.

Secondly, when buying it is necessary to pay attention to a number of criteria:

Quality of coating	Most often, products are covered with powder paint white colorwhich should be uniform and monophonic, without poorly scratched areas. Quality products always processed well and marriage in this type of processing most often indicates that in front of you a budget optionwhich will most likely not be distinguished by reliability and durability
Material of manufacture	In no case do not acquire elements from powder metals, as they are so fragile, which can be broken during the installation, they are very easy to distinguish - for a small weight of the elements. Most optimal option - galvanized steel, it is perfectly combined with any types of radiators and is characterized by high strength
High-quality thread	The reliability of the compounds directly depends on how qualitatively the threaded part is made, it should not have flaws and curvatures. Before buying, we recommend checking how easy items are screwed, they must be wrapped in without any resistance
Operating pressure	The average valuable option is 16 bar, if less is spelled out, it is better to look better than a better option.

Important!
When buying it is best to purchase products famous brandsWell, if the manufacturer of radiators and components coincide.
If the manufacturers are unknown, then use all of the above recommendations to find the best.

What is included

Consider what elements are included in the full set and for which each of their nodes are intended.

Fortors

Regarding this item, you can say the following:

A set of traffic jams for radiators 3 4 includes 2 hoods with the right and two hoods with left-thread, internal size which ¾ inch, in the sets under ½ inches, the thread is respectively smaller.
The size outdoor thread Always equal to 1 inchesSince this standard uses all producers of radiators.

Important!
Many buyers do not understand why there are 4 pouts in a set, because you need only two.
It's very simple: the manufacturer unknown the type of connection on your radiators, and the presence of four elements allows you to use any option.

So that the connections were not only durable, but also sealed, should additionally compact them. To do this, it is recommended to use the pass and paint, but if they are not at hand, you can use the unpack tape. It is important to exclude any likelihood of leaks.

Sealing rings

Many do not pay attention to these items, but they are very important:

Products can be made from paronite or silicone. Many experts recommend the second option as more reliable and durable.
It is important that the ring is located exactly and when tightening the elements, it did not clarify very muchSince it can simply crush it.

Crane Maevsky and Plug

Regarding these elements, you can tell the following:

The plug is needed to close one of the lower outputs, which will not be used when applying. It looks like a hoodo, but does not have a pass-through opening and more resembles a plug.
As for the crane of Maevsky, it is a design, inside which is located a needle valve, can be completely removed from it very quickly from. It is important that a special key in the kit, with which the radiator is lifted.

Brackets

The reliability of these elements is important, since the strength of the element fastening depends on it. Not every radiator kit includes these products, as they are not needed to all, and their price is high enough.

If you are fastened with your own hands, then consider the following recommendations:

For wooden and drywall surfaces, elements are needed in the form of corners or special lamellar holders. For bricks I. concrete walls Products are suitable in the form of pins and saber elements.

For concrete and bricks it is necessary to drill holes in the walls and insert a dowel in them.It is important to place on one level so that the radiator is located without distortion.

You can find two options on sale - the set for the radiator 3 4 and 1 2, as noted above, the choice of a particular option depends on the diameter of the pipes, otherwise they are absolutely similar. The most important thing is the high quality of products.

Output

Using ready set Allows you to not buy all the elements separately, which greatly simplifies and speeds up the process, and the installation instruction is always on the installation. Video in this article will tell additional information Under the topic considered by us.

Installing convectors in your home will help the mounting kit for the heating radiator. Do not confuse the mounting kit and the installation kit is two different things. The latter includes plugs, valves, adapters. And in the battery kit - all that, without which you do not put your heating device to the selected place.

Compound

Usually batteries are installed under the window, in the middle. But in each room there is its distance to the pipe from corner coolants. Installation fittings will correct this situation. It usually includes:

Furnitura on your size.
Crane Maevsky.
Threaded adapters and plugs.

Sometimes there is incompatibility of the heater and fittings. Therefore, when buying, you must immediately purchase and the mounting package for this type of product and in accordance with your installation size.

Varieties

Depending on what house you live in (a multi-storey apartment building, private house, etc.), acquired accessories will depend on. She may be:

With a diagonal connection.
One-sided.
Lower connection.

From the diameter of the product pipes will depend on the diameter of the connection accessories.

For mounted radiators

For attachments of products, different brackets are used - pin, brackets or corners. Only corners are used in wooden rooms. Before hanging your heating device, you must already have the necessary kit to connect the device to the heating system.

Crane Maevsky

This set of mounting set used to reset air from the battery. When the heating device stops warm, then one of the reasons is accumulated in the pipes and heat heating device, which is necessary from there to oust. For this use maevsky's crane, which should also also in composition, and in diameter correspond to the product. Usually it is made of brass. It is necessary to open it for a while so that the heating system began to function again.

See also: Radiators with lower connections

Many manufacturers already produce heating devices along with such a valve. When connected it must be preset.

The standard package for installation does not include a number of elements, without which it is sometimes not to cope with the installation. They are acquired separately. Such components include:

Sealant (for silicone batteries).
Hemp or Fuma tape (for tightness).

And depending on priorities:

Reflective screens beyond batteries.
Frames for heating devices.
Evaporator on the radiator.
Fan.
Dryer.

Easy acquisition

So that when installing, installing and there is no confusion, unnecessary components or missing parts of the kit, manufacturers have provided target assembly sets for specific