Repair chairs with your own hands. How to restore the old chair: Tips for experienced furniture makers and kaleidoscope ideas restoration of the old stool do it yourself

It takes time, and even good things wear out, lose the same gloss and just break. But do not hurry to send a shabby stool to the dump, it can still become a stylish and functional object of furniture. The restoration of the chair will take a lot of time and strength, but the result will exceed all the expectations.

Before deciding how to renovate the old chair with your own hands, you need to take care of its stability. With long-term operation, the furniture is loosened: wood dries, and glued thorns connections cease to perform their function.

Awesome effect can be achieved by simply painting chairs in different colors.

Joinery work

First disassemble the node connection. Observe care not to damage it. The spike is swing and simultaneously tapping with a hammer along the node.
Place the groove is cleaned from old glue and dust. Convenient to make it a chisel or knife.
Then, the spike and the nest is flatly and thin with glue by viscosity 200.
After the node is collected and clamping into clamps. The product should be in a clamping device for at least three hours. Dispersion residues are removed with a damp cloth.

Important! If a bolted connection needs in the repair, put metal or plastic washers under nuts and twist the nuts.

If wooden elements do not fit into the eyes, it is possible to grow the missing volume with a thin piece of wood. Take advantage of casein or middle glue. The clamp is left in a pressed state for 8-10 hours in the warm room. Professional masters use a belt screed that allows you to achieve the desired effort when gluing.
If a spike broke, the defective item is better replaced by a new one. The leg is treated with a hacksaw and cut the nest with a chisel to a depth of 50 mm. After laying inserting the desired size and clog it with a hammer.

Council. Use the PVA dispersion, it is not toxic and is not prone to destruction. The epoxy glue "Master" or "EDP" is suitable.

You can safely lock the legs using wooden slats. We also need studs with nuts and washers

Removal of old coating

To get rid of the old coating, use the emery paper. It is not necessary to remove absolutely the top, it is important to create a smooth and smooth surface. The restoration of the chairs will not seem too exhausting if you use the grinding machine.

Council. You can remove lacquer with technical acetone. They are wrapped with a napkin and wipe the product well. In this case, the natural color of the tree remains.

Accelerate the removal process of the old layer grinding machine

Finishing: staining and varnishing

Since the tree absorbs the liquid well enough, the surface must be projected before the trim, it will reduce the consumption of the material. Colorless primer will suit if the tree is covered only with varnish. In other cases, choose a white primer. White or black chairs look perfectly with contrasting upholstery.

Important! Before working, turn the respirator and gloves.

Apply 1-2 layers of primer. When the chair is dry, go through a fine-grained skin.
Now use the wax balsam, it will give the surface of a special shine. Then polish everything with a brush.
Cover the stool of paint twice. The second layer is applied to a dry surface.
Thin layer along the fibers of the tree apply a layer of varnish.

Council. Use the water-based paint, it is easily applied and dries quickly. You will also need stencil if you want to decorate the chair with an original pattern.

Polishing and painting it is better to carry out in the fresh air

Dismantling and drying seats

It will take: furniture stapler, brackets, screwdriver with nozzles, foam rubber 5 cm thick (or two pieces of 2-3 cm thick), dense fabric for the substrate and upholstery fabric for top. Seat filler can serve as Sintepon, batting, foam rubber.

First remove the seat and upholstery. Solid wooden foundation do not throw away.
Turn the chair and remove all the attachments that hold the seat. Remove the factory brackets.
Pull the frame with the spring. Free it from the remnants of the filler.
In the size of the seat, cut a rectangle of dense tissue, outdumb to be cut out with a margin. The allowance should be 6-8 cm.
Install on the spring the substrate from dense fabric. Furniture staples attach the fabric to the frame.
Place the filler layer on top. The optimal thickness for the seat is 4-5 cm.
Then install the upholstery material, it is most convenient to do this with an assistant. Special textile material can be used as a upholstery, as well as flax and leather.

The fabric on the corners can be fixed in this way.

Creative Solutions for Exclusive Design

First, the chair is two different in color paints, such as turquoise (1st layer) and white (2nd layer). Then gently handle the surface of the back and legs of a fine-grained skin, so that the effect of "scuffs" appears. The color of the upholstery material should be harmonized with the color of the painted part.
To give the chairs of a vintage flash of them in cream, blue, pink colors. After that, they decorate the entire chair or only its part of the painting. Then the gold paint is distinguished separate parts or applied to the entire surface of the varnish cracker. Small cracks will create an antique effect.

Also curious vintage

If you need to recreate an ampir style, select a dairy colley atlas with a floral print. Frame cover the "golden" paint.
Make a chal cover, it will not only protect furniture from pollution, but also will change its design.

Tailoring the case will take a couple of hours of time, a beginner seamstress can cope with such work

The seat upholstery can be made of 30 multicolored leather belts. They intertwined with each other on the principle of "baskets" and recorded from the bottom with self-draws.

Timber seat belts

Patchwork - Patchwork Upholstery for Bright Mood

Often there are things in the closet that are not worn for a long time. Old shirt and shabby jeans will fully rise as "raw materials" for the upholstered material of country chairs. If suitable patchworks were found, you need to pick up shades and carve out composite elements.

Tip: Do not use elastic materials. At first, choose simple, uncomplicated pattern schemes.

Bright accents will dilute strict monotony

Decorating the stool in the technique of decoupage

Would you like to update the kitchen with a small cost? Decoupage is able to make the most nondescript furniture to make the original and attractive. You will need napkins or fabric with a suitable pattern, also appliques from leather.

You can find special cards for decoupage.

After working with a skin, the cracks are sealed with a putty, the product is ground and covered with a water-emulsion.
Then the appropriate image is cut out from the napkin, the surface of the chair is smeared with glue and the drawing is neatly applied. Moving from the center to the edges, smoothes it.
Absolutely dry surface lacquer.

You can decorate the seat, back or legs. Decoupage perfect for furniture in nursery or kitchen

Excellent solution for the transformation of old toaster

Video Master Class: Upgrade Old Furniture

An unstable stool annoys his creaking and carries a potential danger - at any moment he can fall aside under the weight of a person sitting on it. If you have experience, you can strengthen the design, repaint the basis and drag the seat yourself. But if you do not own the secrets of joiner's skill, it is worth contacting the professionals who know how to restore the old chair, and therefore will repair high quality and quickly.

Photo chairs before and after the transformation

The first article of our cozy blog about restoration of old chair do it yourself. We had 4 old chauliev, without a soft back. We tried them restoreso that they do not walk and approached us in color. We also recommend furniture for the hallway to order or in the ready already version, at a very interesting price and with high quality manufacturing. That's how they did and what happened, step by step:

Since it all walked that it was impossible to sit, the analysis did not take a lot of strength. Fully disassembled a chair.

2. Then each part of the chair must be cleared of the old coating. Under hand there was only a knife and a skin .... 🙁

3. To clean the knife of course tin .. But here's how it happened. It is necessary to clean everything, the grooves where the details are inserted. Then we collect the chair, as well as disassembled. In the groove add glue and insert). (We used instead of glue liquid nails Universal Dvoliti, the village so fucking whether you choose 🙂) To assemble the chair smoothly, the level used.

4. We wanted an orange chair with a soft back. In the size of the back cut out from the chipboard plate. Covered Maple Morilka. Waited for 3 hours and covered in a varnish layer. Varnish used yacht.

6. Then began to trim the Podzhopnik). Porolon lay and tightened the parter. (Of course, it is better to use the fabric to use a gabile or a hazard, but we were lying on parquet 🙂) fucked with a furniture stapler. So that the parter does not grumble at the foremns walked down ...

7. Then put into three layers of foam rubber on the back and began to pull the parter. Soo do downstime, for the entourage you can still undergo decorative nails.

8. This is how the back is turned out. Decorative nails were different but one horseradish is not visible from behind :). Seam goes on the bottom.

9. Well, the chair in front)

The remaining three chairs turned out better. Only the old coating was cleaned with a drill, there are special circles with sandpaper. By the time the remaining three chairs came out faster than this first) costs for 4 stools: 100 rubles. Morilka + 120 rubles. varnish + 250 rubles. Fabric Parter. Total: 490 rubles. on 4 stools.

The appearance of furniture with time can become non-primable. In addition, it sometimes breaks and requires repair. Restore the chair, which can serve for many years, is not at all difficult. Sometimes it is only necessary to update the surface - change the upholstery or make a stronger seat. For restoration, many materials are in the house - cut of dense fabric, foam rubber, etc. An updated chair covered with beautiful varnish, looks no less gently than when buying.

The appearance of furniture with time can become non-primable.

The chair updated at home can be issued better than it looked before. For restoration, you need a minimum of materials and tools. Change the thumbnail or rubbed upholstery is the case of one hour.

If the stool is antique, then it is necessary to restore it very carefully.

You can independently clean the wooden surface of the old furniture and coat with a transparent or tinted composition, make new items in the decor. For example, stools are made with a carved legs or back, enhance the seat to use it for a long time for its intended purpose.

For restoration, many materials are in the house - cut of dense fabric, foam rubber, etc.

Restoration costs at home are minimal. Before buying a new chair, think - whether it is impossible to renovate the old and significantly save at the same time. The restoration of antique furniture is especially expensive because it requires great accuracy and exclusive materials. Updating furniture on its own will cost much cheaper.

An updated chair covered with beautiful varnish, looks no less gently than when buying.

Restoration process: Step-by-step instructions

If "native" bolts connecting the supporting structure are separated, they are strengthened with an extra washer. For greater reliability, you can add a little universal glue to the grooves.

Replace the sea grass used in the old days as fillers and horse-haired hair.

The proceeded seat is updated by replacing the basics with lamellas and / or completely restored the upholstery. The worn surface is exempt from the old material. Chair prepared for further restoration:

cut a piece of plywood in the size of the seat;
it is placed on the basis of the foam (width - 3-4 cm);
fasten the Faneur around the perimeter;
stretch up the upholstery fabric on the finished base;
fix the material with a stapler and brackets.

The chair updated at home can be issued better than it looked before.

You can completely replace the back on the curly, if the design allows.

You can not remove the fabric to the outer side of the seat. Then the upholstery is separated around the perimeter inside. The skeleton of the seat will be visible.

The fabric is selected resistant to abrasion and mechanical exposure, quite dense.

Change the thumbnail or rubbed upholstery is the case of one hour.

When updating, you can use a variety of materials. With good joinery skill, a renovated chair acquires an individual style. This takes into account the material - the breed of wood, density, texture.

You can independently clean the wooden surface of the old furniture and coat with a transparent or tinted composition, make new items in the decor.

Chairs included in the kit must be arranged in one style.

If the stool is antique, then it is necessary to restore it very carefully. Be sure to give time to dry the deposited composition.

For an antique chair, decorative material with embroidery is chosen.

For your information. Antique chairs are often with springs in the area of \u200b\u200bthe seat, so it will be necessary to find the same or similar, and the old, rusted and lost elasticity - delete. Replace the sea grass used in the old days as fillers and horse-haired hair.

Restoration costs at home are minimal.

Screw the edges using the jigsaw, clean the edges of sandpaper.

Necessary materials and tools

For restoration of the chairs, you will need the following:

quick-drying varnish (transparent or tinted);
paint;
fabric for upholstery;
foam;
plywood;
sandpaper;
metal washers and bolts (screws);
springs (for a specific type of chairs).

The sandpaper will be required to clean the surface of the furniture from irregularities, chipping and cracks of varnish.

The fabric is selected resistant to abrasion and mechanical exposure, quite dense. Suitable tapestry, flock, horizon, etc. For an antique chair, decorative material with embroidery is chosen.

Updating furniture on its own will cost much cheaper.

Pick up the density in advance, the texture is a wooden foundation, cut it out in size and use the desired drawing with the help.

The sandpaper will be required to clean the surface of the furniture from irregularities, chipping and cracks of varnish. It is necessary to completely sand the chair (wooden structure) for the smooth application of the laminating composition.

For a serious repair, the chair can be disassembled, broken parts replace new and bolted with bolts or screws.

To update the chair, you need tools:

scissors;
roulette;
wooden hacksaw (sprinkle the surplus plywood under the seat);
screwdriver;
screwdriver.

For greater reliability, you can add a little universal glue to the grooves.

For a serious repair, the chair can be disassembled, broken parts replace new and bolted with bolts or screws. Seat frames also often require restoration.

Seat frames also often require restoration.

Viennese chair or any other better looks like this.

Important! It is necessary to use close to the density and texture of the tree of wood so that the chair is functional and looked presentable.

The proceeded seat is updated by replacing the basics with lamellas and / or completely restored the upholstery.

Restoration methods by decorating the chair

There are several options for designing the appearance of the furniture. Chair can be updated in such ways:

staining;
lamination;
decoupage.

It is necessary to use close to the density and texture of the tree of wood so that the chair is functional and looked presentable.

As a decor, you can use both the upholstery itself, picking up the fabric of an interesting colors like the tapestry and the other parts of the furniture, making them carved, figured.

You can not remove the fabric to the outer side of the seat.

The monophonic seat is decorated with smooth embroidery or applique. It must be done before the start of the trim.

The monophonic seat is decorated with smooth embroidery or applique.

The wooden surface of the support structure and the back is laminated, that is, covered with resistant varnish in several layers. The coating tone is closer to the natural shade of the tree (light, dark or moderate). Viennese chair or any other better looks like this.

A renovated chair can be additionally decorated - make a wooden surface with lighter or darker, to make a back or legs differently.

You can completely replace the back on the curly, if the design allows. Pick up the density in advance, the texture is a wooden foundation, cut it out in size and use the desired drawing with the help. Screw the edges using the jigsaw, clean the edges of sandpaper.

The wooden surface of the support structure and the back is laminated, that is, covered with resistant varnish in several layers.

The chairs included in the kit must be arranged in one style so that they do not get out of the overall picture - "single-caliber" furniture can look good in different rooms, but behind a common table, for example, when celebrating a family celebration, it looks careless.

When updating, you can use a variety of materials.

Video: Restoration of the chair: how to make a chair with your own hands. Master class from Katerina Sanina: design, interior

Each person sooner or later has the need to buy new furniture, concerns this not only large interior items, but also chairs. But before you go to the store, you need to think carefully, because, perhaps, there are many furniture in your house, which can be updated independently and is unrecognizable to transform. In addition, prices in modern salons and markets are often overestimated. For example, the restoration of the chairs with their own hands is the perfect way out of this situation. Today we will tell how to restore the old furniture, how to act in stages to achieve a good result.

The main advantages of furniture restoration

This option to restore interior items has a lot of advantages. The most obvious of these include:

It takes this process quite a bit of time, especially if you clearly follow the instructions.
The transformation of old furniture allows you to save well on buying new products.
Restoration of chairs allows you to get completely new, unique things that are not in any other house.

Chairs, like other furniture items, have a property to wear out, and quite quickly. Even the highest quality products are subject to breakdowns and aging, especially when a person accelerates this process with his actions. It may be serious damage caused by negligence and too intensive operation. Most of all suffer from the seats, because they account for the maximum load.

To renovate worn out products, it is not necessary to have tremendous experience in the field of repair and decoration. It is enough to familiarize yourself with several master classes on painting, a drawing, decoupage, decoration, alteration of old furniture, and everything will turn out.

Important! This experience is definitely useful in the future if you decide to update the upholstery on the old sofa or drag the chair. Using this approach, you can inhale the second life into any product, instead of sending it to a landfill.

In addition, this idea has another huge plus: you not only renovate old chairs yourself, but also experience a maximum of positive emotions from the embodiment of your own creative venture.

Features of the renewal of the chair or stool

Remember that the way you choose in order to restore the chair with your own hands, directly depends on the nature of the damage. There are three main types of damage:

Upholstery wear.
Problems with backrest, broken leg, seat or other wooden part.
Breakfast coating on a wooden surface came into disrepair.

Based on this, it can be concluded that the scheme of repair and restoration is selected, depending on the place where the problem arose on the furniture:

It is often enough to connect the separated details, replace the connecting part, failed with time. It concerns these spikes and grooves.
The expansion and wear of these elements leads to the fact that the chair slowly begins to break and becomes completely unstable. In such cases, the repair is to fully disassemble furniture with spike buildup. Here you have to work well good.
If the problem concerns the wear of the paint coating, then it is easier to eliminate it. If the varnish crackled, it is enough to remove it, emery paper to treat the surface and apply a new layer of paint or varnish.
You can also be called a hauling of old chairs, because it is necessary to simply replace a torn or worn fabric to a new material.

Now we will look at the most popular restoration options in stages.

Phased reconstruction of the old chair

Before renovating the old chair with your own hands, you should familiarize yourself with the sequence of doing this work. If you first come across this, then learn a brief master class that we will give below.

Preparation

If you properly approach work, you can fully restore the furniture yourself, even if the upholstery broke on it, the legs or a paint or varnish were crushed.

First of all, you should prepare the minimum set of necessary materials and tools:

Materials: self-tapping screws (screws), upholstery fabric, staples for stapler, foam rubber, glue for wooden furniture, varnish or paint.
Tools: hammer, screwdriver, scissors, two different screwdrivers, clamp, tassel, sandpaper, stapler, small cueint.

After that, prepare the chair: Clean it from dust, dirt, worn thoroughly.

Disassembly

Naturally, before refreshing the old chair with his own hands, it must be fully disassembled. As soon as it dries, you can start working:

The first thing is removed the back and seat, only then the framework is disassembled.
When knocking out parts, use Rubber Cyans not to damage them. Work as neat as possible.
If the chair is assembled with screws or spikes, then it is enough to develop them.
Fold all the details gently either indicate them somehow that it is not to confuse.
If somewhere left the old glue, in particular epoxy, then attach moistened rags or sponges to these places. Any unnecessary old vest will suit. Let it be happy on the details until the glue is completely spinning, then it can be scraped with a knife. For work, a stupid old knife is suitable.
After the old glue is removed, let wooden elements dry a little.

Important! If the epoxy resin fell into hard-to-reach places, then you can use steam instead of water in order to remove it.

Reconstruction

So, the preparatory work is fully completed, you can now move to the process of restoring the old chair.

Do it in such a sequence:

First, get rid of possible cracks and chips with a putty.
Carefully polish sandpaper wood so that the entire work surface is perfectly smooth.
Carefully inspect all the details. If the legs are loosened, then solve this problem now. Take advantage of the wedge, drive it from the end of the pin or wrap the trough of the ripple, then thoroughly dear it with glue.

Important! If you could not fasten the legs with the proposed ways, then try to use another method more efficient. Drill a thin hole in the connection site, fill the glue there with a syringe. To secure glue, make a connection more reliable, put some cargo on the seat and wait until the glue dries.

Then renovate the seat if necessary. It can be wooden or made of soft tissue. All depends on the design of the furniture itself.
As for the refreshment of the frame, it is possible to do this by restoring the paintwork or the use of decoupage techniques.

Important! If you wish, you can sew new covers so as not only to update the chair, make it the design more interesting and attractive.

The ideas of decorating old chairs

On this, the alteration of old chairs does not end, you can decorate them in various ways. Below we will give options for renovating internally vintage interior items and decorate them.

Decoring the old chair using one of the options proposed:

Decorating with cloth. This decoring option is considered the easiest, because it is enough to simply drag the old soft places or sew covers. You can use this approach to updating other interior items.
Backing upgrade. You can decorate the back, using the decoupage technique or some interesting cloth, for example, denim. To understand in fact, how to see a chair with my own hands, can any beginner master, and this work will not take much time.
Towing upholstery. It is important to choose a solid and high-quality fabric. It can be a tapestry, jute, jacquard. In some cases, even velor is suitable.

Important! The best result gives a tapestry upholstery, since it is a reliable material that looks quite attractive.

Wooden chairs are often the one, then another junction is spun, and the chair starts swing. Without spending special tools, you can repair the old furniture before it completely crushes.

In contrast to modern plastic, old wooden chairs consist of a variety of parts connected by glue. Over time, some kind of glue seam may disperse. The fact is that when drying, the tree is compressed. As a result, the compounds are loosened or diverged.

In addition, glue can refuse and no longer hold the part.

In general, to make out of the expensive heart made by his father in youth, new beautiful chairs for its current interior.

Read more: sdelaisam.mirtesen.ru.

Unfortunately, with time chairs, however,, like all the rest of the furniture, deteriorate, scratch, are wiping and in general lose the appearance.

Skiving legs, creaking seat and seamless upholstery - oil painting, isn't it? But often I do not want to throw away the furniture. And the reasons are sufficient. Do not despair if your favorite chair "drove up."

The restoration of the chair will help his own hands to return him to life.

On wooden chairs, then one, then another junction with time is spawned and the whole chair begins to swing.

The old chair can be fixed before it falls completely, while not spending a lot of money on it. Wooden chairs consist of a variety of separate parts interconnected by adhesive seams.

Fortunately, from this chair itself does not come into disrepair. Skillful hands of a homemade master may well save it.

With minimal cost, you can drastically change the appearance of the furniture, everything will depend only on your imagination and selected materials.

Before repairing the chair, you need to get acquainted with the detailed technology, it will allow you to prevent serious errors and do everything correctly.

Read more: Moyagostinaya.ru.

How to disassemble yourself?

It is not difficult to disassemble the chair, because its design is known to almost everyone. First, you need to unscrew the back, and then the legs. And collect the product in the reverse order so that all the grooves take their places. In the event that the stool is fastened with glued spikes of the attachment location wetted with hot water or hide the steam from the steam generator.

The renewal of the children's chair occurs on the same principle as an adult, but sometimes it needs to replace the loop or turning mechanism. Usually, children's structures consist of a variety of details that are designed to secure the position of the child. For greater strength, all connecting spaces need to be punctured.

To disassemble the folding chair, it is enough to remove the axial pins that connect the back and sidew, and then remove the seat. Designs on a metal basis Disassemble easier - it is necessary to unscrew the seat and a soft part of the back.

If the chair seat is installed on the spring block, it must be replaced with new springs. The whole block for this is not necessary to remove.

The recovery process of stages

Each material is painted by a special way. For example, an anti-corrosion agent is first applied to the metal frame, after full of grazing covers its main color. Transparent varnish are applied in several stages, and if the painting composition is used, it is better to resort to the enamel of metal.

Wooden frame first treated with wax, carefully distributing it on all areas. Instead of wax, you can use oil primer, which is applied with a brush. Then the product is covered with several layers of acrylic paint. These recovery steps allow you to quickly and easily update the chair without using special protective masks and gloves.

The last stage of the update consists of creating a beautiful upholstery. After removing the old upholstery, the base of the seating is cut out of the foam pillow, which is then fixed on the surface using glue. For additional fixation, you can use clips. I stretch the cloth all over the seat well, it is fixed with furniture paper clips. Depending on personal preferences, the fabric may have a bright pattern or not to have a picture at all.

To remake the seat with springs, first fix batting, and then layer of the foam sheet. The fabric is fastened by the same principle as with one layer of foam rubber, but it is stretched with a big focus to smooth the spring relief.

Many people think about what paint is better to paint in order to preserve the effect for a long time. For wooden products, it is possible to use a veneer or paintwork, and for iron structures - enamel, specially intended for metal.

Viennese

To restore outdated design, you need to prepare basic materials and tools. To work, you need to get a hammer, a furniture stapler, self-tapping screw, paints, solvent, tassels, glue, scissors, cloth and sandpaper.

The update process begins with the purification of all surfaces of the product from dirt and dust. After that, the laying of the chair begins. First remove the seat and back, which usually hold on to screws. Then the remaining parts are taken step by step. It is important to check the strength of all connections. If some fastening place is bad, it is not worth disassembled.

Update details

It is possible to decorate the chair in various ways. Any Materials can go to the move: paper, fabric, laces, paints, napkins, etc. It all depends on the fancy of the master and on the level of his skill. Naturally, if a person does not know how to work with complex technique, then you should not resort to it. You need to start with something more understandable.

With sisal

For this method, you can use both wooden and metal frame. To work, you will need a large tangle rope from sisal, dense upholstery fabric type velvet, stapler, superchalter, scissors, nails, hammer, pencil and centimeter tape.

Having made the pattern of a new upholstery, you need to fix it on the seat. For this, small nails or stapler are suitable.

Woolen Big

To resort to this option, you need a design on a metal frame with a mesh back and sidew. To work, it is necessary to prepare scissors, a multi-colored wool yarn, a knitting hook, a plank of wood, dumping and screws.

Shebbi Shik

Upholstery of old chair

All photos from the article

As it were neatly a man either enjoyed furniture, over time she comes in disrepair. The appearance is worse, the upholstery fades and ceases to delight the violet of paints, the joints cease to be reliable.

Usually in such cases in furniture 2 ways: either go to the landfill, or to get into the hands of the master who will do everything perfectly, but not free. But there is a third option - to do everything yourself.

This chair got a second life

Repair of wooden chairs implies the restoration of not only its appearance, but also the strength characteristics. Specialized services are often referred to as a restoration process.

It is not necessary to confuse such a restoration with the fact that experts are engaged in restoring museum exhibits, in their case it is necessary to make the state of the object in the current state of the time, which somewhat limits the person in choosing funds. In the case of repair, you can apply any methods up to the replacement of individual parts.

During operation, such defects may occur as:

damage to the paint / varnish layer, affects only the appearance of the chair;

The appearance of the chair in the photo leaves much to be desired

splitting the joints of the spike groove. A tree with time can dry, and under the action of regular loads, such joints are smalleled;
chips and cracks on the tree surface. In principle, most of these defects can be eliminated without replacing the part;

the upholstery of the seat and the back is necessarily emotioned in a few years, it can also break out or just fading if a bright sunlight constantly got into the chair;

Upholstery sooner or later will turn into something similar

more serious damage (broken leg, back) can be corrected only by their replacement.

Repair of a wooden chair with their own hands is possible for all described types of defects. Special equipment will not need, so that absolutely any person will cope with the repair.

Technology repair

In order for the chair after the restoration, it is practically like a new one may take his full disassembly. But there are exceptions, for example, if you need to update paint only, you can do without it.

You can attribute to small defects that for their elimination do not require full disassembly of the chair. That is, renewal of paintwork, elimination of small cracks, chips, etc.

For the repair of such a defect to disassemble the chair optionally

If the chair does not please the appearance, but still remains quite durable and not sinking, then it is possible to limit it simply by its painting / lacquer coating.

The main problem at the same time is to remove the paint and not much damage the wood itself.

You can perform this task in several ways:

using a construction dryer and spatula. The whole instruction is that the hairdryer gently need to warm up the paint layer, and remove it with a spatula;

Removal of paint hairdryer

you can try to remove the paint mechanically. You can use a conventional nozzle on a drill in the form of a emery circle or a metal brush;

You can try to remove paint and manually

claimers for removing paintwork can only be used if it is possible to organize good ventilation in the workplace. And it is better to perform work at all on the street.

You can use special washes

Also, small cracks of wood can be attributed to non-essential defects, as well as chips and holes made by insects. To repair such damage, you will need only carbon black, fine sawdust and clamp / clamp;

small cracks (with a width of disclosure not more than 0.5 mm) can be simply cleansed from dust, fill with glue and wrap the damaged place with ordinary paper tape;
cracks are also crucible, filled with glue, but in order for the edges to come together, the clamp is used (for the part of a square or rectangular section) or the clamp (for the elements of the circular cross section);
squares and holes made by insects can be sealing with a mixture of joinery and small sawdust. After painting, these places will be absolutely invisible.

The defects described above can be called cosmetic, they do not affect the convenience of operation of the chair. Much worse if the chair is walking, this is a sure sign that serious repairs are needed.

For repair, you will need to disassemble the chair

Repair of wooden chairs with such defects is that:

chair disassembled. If the glue still prevents the spike from the groove, you can direct the vapor in the slit and after softening the glue, it is easy to disconnect the connection. Problems when disassembling may occur with old screws that are not so easy to remove. In this case, a pair of oil drops can help and 10 minutes expectations;

According to this scheme, you can soften the old glue

then you need to examine all the compounds to detect the sinking. The singular part (the one that is inserted into the grooves) can be folded so that it becomes accurately match the size of the groove. You can also simply wrap the alternate part of the bandtik, impregnated with carpentry glue;

The main stages of the repairs of the stool chair

in some chairs, the sings are used under the seat, between the legs, as a rule, are also arranged. This design of the chair can be easily strengthened and without disassembly. Everything that will need is to install in the corners of small bars to increase rigidity.

Study rigidity scheme

Change the upholstery

Of course, you can seek help from specialists, but the cost of replacing the upholstery is unlikely to be below 500 rubles. With the same success, you can replace the upholstery yourself, the difference will be absolutely invisible.

For this will have to:

dismantle from the chair the seat and gently remove the old layer of the upholstery, the foam rubber is also better replaced;
next, an inspection of the tree surface is performed for possible damage, their elimination;
removed upholstery can be used as a pattern. On the new fabric, the contour is noted, it is necessary to make a letter of centimeter 2-3, this tissue strip will bend from below;
at a flat surface, the upholstery is placed on top of the seat size of a piece of foam rubber and the seat itself;
the edges of the new upholstery need to be adjusted so that neat folds formed in the corners, after which you can nail it to the tree with special cloves with a big hat. You can also use the construction stapler for this.

Fixation of fabric stapler

Summarizing

DIY repair of wooden chairs is quite real, all the more so that this will require a minimum of tools. As a result, the old furniture will receive a new life, and the owner will have a legal reason to be proud of the impeccable work done, and a small economy of the family budget will have to be.

In the video, this article shows an example of the restoration of the chair with the hands of the wizard.

It will take:

nail holder;
pliers;
small nails and a hammer (furniture stapler);
upholstery fabric;
sackcloth;
dense wide ribbon;
dense fabric (canvas, tarpaulin);
batting or syntheps;
coconut fiber.

Repair the chair, if it did not really suffer over time and has a completely decent appearance, you can, replacing the upholstery. First of all, it is necessary to remove the seat, then with the help of a nail to remove old nails, carefully remove the cloth, remove the rest of the contents and springs.

It is important to remember the sequence of disassembly - then it will be easier to assemble the seat again. Evaluate the strength of the upholstery materials, those that are still in good condition can be left, and those that have already served their own, it is better to replace new ones. In no case do not leave old nails - this will very complicate the subsequent work, especially when using a furniture stapler.

Repair starts with fastening tight ribbon to the seat frame, it is best to do this with a furniture stapler. But such a tool is far from every family, but to buy it in order to repair a couple of chairs, it is impractical, so you can use short furniture nails and a conventional hammer.

The tape is naked in the form of a lattice, binding vertical and horizontally among themselves, should be a certain semblance of a braid. The distance between the stripes should not exceed 5 cm, the perfect option - 3-4 tapes vertically and horizontally. In order to pull the tape well, its end is wound on a wooden bar.

On top of the ribbon lattice, the burlap is neglected, then the springs are arranged, sew them from the bottom with the help of Gypsy needles and durable twine, ordinary sewing threads are not suitable in this case. The main task is to fasten the springs in such a way that they become fixed. After that, they begin to mate, opposite each spring clog the nail (not to the end), tie a tight rope on it (you can linen or linen twine), drive the nail until it stops.

Then perform the strapping of each spring from above, in this case it is easier to use a node that is used for networking networks. The mating is performed vertically, horizontally and diagonally, at the end of each row, the rope is tied on a robbed nail. It is very important to choose a tight twine, which is difficult to break, since it is from this that the service life of the new upholstery will depend on this.

On top of the springs, dense fabric (canvas or tarpaulin) are fixed, followed by a layer of coconut fiber, which is covered with a vatin or syntheps (can be replaced with a furniture foam), all this is fixed by another layer of tissue. Further rejects upholstery material to make the pattern, it is enough to wrap the seat with a newspaper.

First, feed the upholstery in the center of one of the sides, then from the opposite edge. At the same time, the threads of the fabric do not shift. The corners are fixed in the last place, if necessary, the tissue is collected in small folds. The edge of the upholstery can be separated by a cord or braid, the decor is glued with a glue gun. It remains only to return the seat in place. On this upholstery, the chairs can be considered completed.

Regardless of whether it takes carelessly or carelessly, each of us uses furniture, after time, it loses its original appearance and comes in disrepair.

Exterior upholstery, unpleasant appearance, joints of structures are loosened - these are signs of a constituted, unsuitable furniture.

Assembly and feathering

By updating the stool frame and having threw the soft details of the upholstery, it remains only to collect the product. The assembly is carried out on the same scenario as the analysis. The legs and the back are inserted into the same sockets, where they stood before repair. Phaneru is fixed to the frame or on the glue, either on the paper clips.

After restoration, you can get a unique object from the old and dull furniture. You can simply paint the sweat product in a delicate color, and you can resort to a more complex update technique.

On this, the process of restoration of the old chair on the new way of the house is finished with their own hands. To create a more attractive and expensive piece of furniture, instead of dense textiles, you can use dermantine, natural skin, as well as a varied decor.

On how to restore the chair yourself, look next.