How to make an iron man helmet: step-by-step instructions. Iron hand with your own hands. Iron Man's Hand Make an Iron Man's Hand from Iron

The character of many animated series, cartoons and three wonderful films is gradually becoming extremely popular both among cosplayers and among children. What child does not dream of such a wonderful outfit that will not only make him almost invulnerable, but also allow him to fly? Of course, it is impossible to assemble a real costume for obvious reasons, but children's imagination compensates for all the shortcomings surprisingly well if the iron man's costume becomes his own. Read on to learn how to assemble it yourself!

Putting it together in parts

In order to make your child an iron man costume that is as similar to a real one as possible, it is enough to show a little imagination and put a little work and free time into it. It is best to use aluminum for this purpose. It is lightweight, durable, bends well, and you don't need a lot of tools to process it. To give the costume a more realistic look, it is recommended to paint parts of it with cans of yellow and red paint. The eye slits can be repaired from the inside with sunglasses. Also, you will need any yellow turtleneck with a neckline and long sleeves.

In general, now there are quite a few professional imitators trying to copy this superhero. Iron man suits are made by them from a wide variety of materials. They can be of any shape and color. Lots of cosplay photos of Tony Stark and his awesome costume have surfaced! Do not be lazy and give your child a dream, because who among us in childhood did not dream of being a superhero and performing great feats?

Beyond obvious attractiveness and charisma Robert Downey Jr. as a genius billionaire turned superhero - Tony Stark- the movie from Marvel has created a great temptation to find out what kind of toys and devices are built into the latest version of his high-tech suit. And while innovations such as a suit that unfolds from a suitcase right on your body, or clothes that always follow you when you wear special bracelets remain in the realm of science fiction, there is still hope. Much of what is built into the suit " Iron man"Has analogues in our world, albeit not as chic as in the film.

With a durability-enhancing exoskeleton and jet beams, as well as a robotic assistant, becoming a real Tony Stark will be quite difficult - and certainly not cheap - but not impossible, anyway.

Despite how cool Tony's toys are, without a source of energy, they will remain only beautiful armor. You need to connect a small arc reactor based on cold fusion.

Fusion reactor technology is at the heart of the Stark Industries business and the Iron Man suit. There are no analogues of this technology in our world yet (though). Marvel.com suggests that the technologically comic reactor is rooted in the tokamak, an experimental Cold War thermonuclear reactor developed back in the USSR. Like an arc reactor, the "tokamak" is made in the form of a toroid, includes plasma, magnetic fields and generates a huge amount of energy.

The tokamak is much larger than the arc reactor - even larger than the prototype at Stark Industries - and has still not gone beyond the scope of the experiment. But given Tony's genius in miniaturizing complex structures, most likely the basis of a fantastic thermonuclear reactor is precisely the tokamak.

According to Neil DeGrass Tyson, the problem with designing a fist-sized power source is not so much about generation as about storage and potential side effects. For the best performance and minimizing burns, DeGrasse Tyson recommends a different type of power source: one of them can be based on controlled annihilation of matter and antimatter. , for example.

Reactive gloves

The jet beam glove is one of Tony Stark's most used weapons, but it can hardly be recreated with high precision in the real world. Of course, this option is not suitable for the quivering fans of "Iron Man". One of them, the German Patrick Pribe, during one of the breaks in his work (for the processing of polymers) made something that looked like a reactive glove: a laser built into his hand.

A lithium-ion battery laser may not have the destructive power of Iron Man's gloves, but it can do harm. It emits a 1000 mW beam, which is 200 times stronger than the laser beam allowed in most countries for use. In short, if you want to fry your cat, he may well catch fire.

Not satisfied with the work done, Prieb went further and created what he called "", completing it with a retractable laser.

According to the legend of the "Iron Man", the hero can fly thanks to powerful jets of energy beating from the feet of his shoes. They move him through the air, without the danger of spontaneous combustion of his legs and without the need to wear high heels that would make the hero look like a representative of glam rock. However, in our world there are no jet boots that will help you take off, but there is something different: a personal jetpack. Jetpack.

Personal jetpacks have been around for a long time. The first sample appeared in 1919 in Russia, its creator was the inventor Alexander Fedorovich Andreev, but only in 1960 the first jetpack was presented to the public. Unfortunately, the high cost and short flight time meant that the hype around the invention would quickly disappear.

But the dream lives on. New Zealand-based Martin Aircraft has developed the Martin Jetpack, a petrol-powered personal jetpack that can be airborne for up to 30 minutes at a time. It is intended for the consumer market. According to some estimates, its price is about $ 1 million, and this is the minimum. But no one disputes the fact that all initiatives are expensive for the real Tony Stark.

DARPA (Defense Advanced Research Projects Agency of America) has been working on exoskeletons that can improve the physical combat capability of American soldiers for over a decade. In 2010, defense contractor Raytheon unveiled one of the results for the first time: the XOS 2 exoskeleton.

The suit is designed for work in the field of logistics, that is, logistics, significantly increases the strength of the wearer, allowing him to easily penetrate the three-inch layer of wood. Built-in hydraulics work independently of the muscles of the suit wearer, thus giving him the ability to work for three. Lightweight materials and construction leave maneuverability, which massive military equipment cannot boast of.

There is, of course, a problem. Each suit must be plugged into an outlet and also connected to a central control panel. The tie-on suits are slated for release in 2015, while Raytheon is developing loose-fitting suits for future use.

Exoskeletons are used not only in the military environment, of course. Outside the theater of war, the same technologies can help people re-learn to walk and gain extra muscle. In fact, it is Ekso Bionics, one of the leaders in the development of medical exoskeletons, who shared their technology with Lockheed Martin for military purposes, not the other way around.

Like the military exoskeleton, medical devices are designed to help the body with added strength, but they also help the muscles retrain and strengthen them in the process. It may not be possible with their help to lift a row of wooden beams or rockets, for example, but thanks to exoskeletons, people who cannot walk or do not have such a precious opportunity will get it.

Thought-Controlled Computers

If the fact that Tony Stark controls the entire suit of high-tech armor with the power of thought seems completely impossible to you, how surprised you are that there are already technologies with which you can control a computer system with just the power of thought.

In the Advanced Technologies Laboratory, together with Ruzbeh Jafari, assistant professor of electrical engineering at the University of Texas, an experimental system has been developed that allows you to control, for example, a Samsung Galaxy tablet without touch or voice commands. Everything is based on where you are looking and where you focus.

It must be admitted that technology has not yet reached the stage where it is possible to write a rudimentary message using this method, let alone control a complex military machine. So far, the user's choice is limited to a meager menu. But this is just the beginning.

Holographic display

While watching the movie "", in the scenes showing Tony Stark inside the armor, we see screens popping up in front of him, providing him with the necessary information. It looks great. Why don't we have this? In fact, everything will be, and very soon.

In fact, the point is not in glasses that can take pictures, thereby bringing Google Glass closer to Iron Man technologies, but in the very concept of a wearable computer connected to the Internet, which can respond to voice commands and display information available only to the wearer. Obviously, miniature glasses for Instagram lovers are the first step towards a full-fledged helmet that will help fight crime.

J.A.R.V.I.S.

Smart homes are a tempting idea for science fiction lovers. However, with advances in wireless networking, data analysis and systems like J.A.R.V.I.S. are rapidly approaching scientific reality.

According to Dayana Cook of the Washington University School of Computer Science and Electrical Engineering, the key to intelligent housing will be an ubiquitous intelligence capable of seeking and interpreting information, and autonomously acting according to algorithms. Some of these systems already work in your home. Air conditioners can automatically adjust the temperature, refrigerators can defrost automatically. Etc.

While Jarvis is an assistant at Stark's lab, Cook's research on smart homes is focused on something else: she's exploring how mobile intelligence can help retirees live longer without outsourcing.

If you are still a fan of Tony Stark technology, we suggest you take a break from the movie and go straight to the comic. One version of the iron suit is equipped with rollers that extend from the bottom of the armored suit.

A natural question arises: although the push for the development of technology in the film led to the creation of elements of exorbitant power, why not take and equip your iron suit with rollers?

Unfortunately, science does not give a definite answer to the question of how to find a reasonable and nice secretary who will be infinitely loyal to her boss.

Well, fellow papercrafters, it's time to make the Iron Man Suit with your own hands.

By popular demand, we are posting the Mark 6 Iron Man costume. I don’t know why, but we decided to start with this particular model, so get ready for a long and exciting quest to collect all the parts together. First of all, we buy a valerian pack, scalpels there, all the cases, and read further about how to make an iron man suit with your own hands.

Well, first of all we need the Iron Man Mark VI helmet. I attach the actual scan (drawings). Occupies 14 pages in pepakura. Well, actually, we collect it like a regular helmet. Even a couple of spacers are included.

Iron Man Helmet Mark 6 -

What goes behind the helmet in our iron man suit? Right Neck! It takes 7 pages in papakura, it is not difficult to assemble, as always, you will have to worry a little with fintiflyushki.

Next, we will take on the chest of the gallbladder. Here it would be necessary to measure your chest, or rather your ribs and compare with this scan. This model of the female breast is made for the average static adult papercrafter. The girth in the ribs in this drawing is 32 cm in the narrowest place, on average 35. Perhaps you are starving or, conversely, a noble bodybuilder, so it is better to play it safe.

Oh yeah, I almost forgot about the collar from the Iron Man suit. Two pages and assembled easily.

This time, the Iron Man suit will gain forearms. Contrary to the expectations of some, the forearm is between the biceps and the hand. This useful part takes 10 pages in pepakura. It's easy to assemble. Requires mirroring.

And finally, the last part of the hand is actually the palm itself and the fingers of the iron man made of paper. Judging by the sweep of the hand, it smells of the first difficulties here, although it may only seem.

So, our do-it-yourself iron man suit is slowly beginning to take shape. Now it's time for the press, or belly, which makes us a little upset, because it takes as many as 25 pages, a lot of ends.

The time has come for the intimate part - ZhCh panties. These, of course, are not panties, but a codpiece, but whoever you like best. Takes a coward 8 pages in pepakura, easy to assemble.

Well, here we come to the feet of our iron man suit. The thigh of our hero is located on 15 pages. Don't forget to mirror.

Well, that shin arrived in time. She also swung something on 21 pages, has both the left and the right part. A couple of spacers are included.

Well, here we come to the completion of our miracle costume. Foot comrades papercrafters, foot ...

This piece in the Iron Man suit is attached between the forearm and palm. Some call it the wrist plate. But the main thing is that you understand where she should find her refuge.

Well, that seems to be all. It's just something to do. I sincerely wish you good luck, because it will come in handy if you decide to bring all this to mind. Something like this should come out after gluing the paper model. True, this is a different mark.

The briefing is over. A short anatomy lesson is complete. Start gluing! GOOD LUCK!

Hello everyone!
Do you know who Iron Man is?
If so, then you are reading the correct article!
In this article, the method of making an iron man's helmet will be described in detail; for a greater visual perception, the author attaches a full photo report.

Let's start making!

We need the following:

Instruments:
- soldering iron;
- scissors;
- ruler;
- stationery knife;
- sandpaper.

Materials:
- cardboard (not too thick);
- polyester resin, or epoxy;
- fiberglass;
- paint (red and gold);
- switch;
- 2 batteries;
- 6 LEDs;
- wires;
- transparent plastic;
- small magnets, or Velcro;
- 2 small pieces of wood.

As you probably already understood, the helmet will be made of paper, namely, medium hard cardboard. We do the following, download the template provided by the author, and print it on a printer.

When all the details are printed, we have patience and begin to cut them out of cardboard, for this we use scissors, working with smaller details it is best to use a clerical knife.

Next, you need to download a small program Pepakura Viewer 3, it will help you when gluing parts, when setting certain settings, the program will show the sequence of gluing the parts. (Google will tell you how to set these settings correctly, you will learn and read about what this program is all at once).

As you can see in the photo, the parts are numbered, and so, each number should be glued with the same number (that is, for example, 122 with number 122), it is best to immediately put the parts by numbers, so it will be easier to glue.

We take our favorite glue and start gluing the parts. Since the edge of the cut parts will be folded, it is best to use a ruler for this. The gluing process is very long and rather tedious, so we have to be patient, it is best to do the gluing intermittently.
After hours spent gluing the parts together, you should have the following.

This helmet has a removable part, it is located at the bottom, and so, it is unnecessary to glue it to the base of the helmet. And there are also two triangular parts, they will help the helmet keep the correct shape until the helmet is covered with polyester resin.
We carry out the process of covering the helmet with resin.

For this we use fiberglass and resin, two of these components will make your helmet strong enough. From the beginning, cover the outer side with resin, evenly applying fiberglass, smear the resin over the entire area of ​​the helmet with a brush. Next, we do the same operation with the inside, leave the product to dry.

Important!
This operation with the resin should not be carried out on a carpet or sofa, or the like in unsuitable places for this, select a special workplace for this, use gloves when working with the resin.

When the product is dry, we coat it again with two-component epoxy resin, leaving the part to dry.
After the part is completely dry, we take sandpaper and clean the surface, while removing all the irregularities, and giving the helmet a molded shape.

When you have achieved the desired result, you can paint the helmet. We close with tape those places that will be painted in a different color. First we apply one color, in this case red, then gold.

You should get the following.

Now let's move on to the back of the helmet, which is removable.
We cover it with resin and fiberglass, and then we clean it with sandpaper. If there are deep irregularities, you can additionally use automotive filler.

Pay attention to the ears of the helmet, on paper they are just round, the author decided to make them out of wood, namely, cut them out of not thick plywood, then fix them in place with glue.

Since the helmet, according to the idea, will be worn on the head, and it will not work to put it on without removing the back part, we make a fixing removable element that will connect these two parts to each other, for this we use small magnets, if there are none, you can use Velcro.

We make the teeth from two pieces of wood 10 * 2.5 cm, after making notches on them, paint them black, and then glue them to the helmet from the inside.

Now we turn to the electronic part, in order to make the helmet look spectacular, we make the backlight. For this we use 6 blue LEDs. We take a soldering iron and solder the parts according to the presented diagram.

For parents, preparing for the holidays in which their child participates necessarily includes making or purchasing a character costume, in whose image the baby will appear. Recently, various superheroes or people with supernatural abilities are gaining more and more popularity. One of the boys' favorite characters is Iron Man - a multifunctional robot controlled by Tony Stark (his creator), saving the world from evil.

Iron Man's costumes can be very diverse and have many variations, because, unfortunately, it will not work to create a real vestment that makes its owner invulnerable and even makes it possible to fly. But you can make a hero's costume from simple materials with your own hands. Of what? Yes, there are just a lot of variations: from paper, cardboard, sewn from fabric, made from aluminum or other metal, cast from plastic, etc.

The main components of the costume

If you take up the costume of this character, you will find that there are many models and varieties of it, so choose the option that you like the most. The most popular and spectacular model is the Iron Man Mark VII.

Children's costume should be lightweight and safe, so you should not connect electronics to it to recreate glowing eyes or other elements of the hero's image. It is better to make a costume for the child using the papercraft technique. It will allow you to create an image using paper, cardboard and gluing using special technologies.

To make a product, you need diagrams or drawings. There are already quite a few of them. By installing Pepakura Designer 3 or Pepakura Viewer, you can unpack * .pdo files. Then they can be edited, set their sizes, etc. The schemes can be redrawn or printed using a printer. Then - collect and paint. This way you will get an almost real costume with your own hands.

• Link to the program Pepakura Viewer: http://www.tamasoft.co.jp/pepakura-en/download/viewer/index.html
• Iron Man patterns can be downloaded here: http://pepakura.ru/razvertki/bronya/kostyum-zheleznogo-cheloveka.html

Manufacturing process: what needs to be prepared and how to assemble the parts?

After printing out the drawings, take measurements from your child and make the necessary changes to the diagrams - so you will have your own children's version of the costume. Then print again, but with the correct dimensions.

Paper for making a suit must be taken with a density of at least 160 g / m2. Experienced cosplayers advise taking not even cardboard, but a very dense Whatman paper. You will also need:

• a good sharp cutter or utility knife;
• special cutting mat;
• awl;
• glue and glue gun;
• scissors;
• epoxy resin (rubber gloves and a respirator are also needed when working with resins);
• acrylic paints (red and gold);
• transparent plastic;
• sandpaper.

So, start making your own costume.

• The helmet is made first. To do this, print out the helmet drawings and cut out all the details. Then carefully start gluing them together (assemble like a regular helmet). All elements are marked with numbers, so you need to glue them together very carefully (the back of the mask, which will be removed, does not need to be glued).

• After you have finished making the helmet, you will need to cover it with a special two-component glue (epoxy - resin plus hardener). Secure all elements of the helmet from the back with regular stationery clips and cover it with glue. Be sure to use the correct proportions to ensure that the product dries later and is usable. Some people use polyester resin instead of epoxy, but it has a very pungent and toxic odor and takes a long time to dry.

• Then reinforce the inside of the helmet with fiberglass (cut the material into small strips and glue it in several layers inside the product) and again cover it with epoxy glue on both sides. When everything is dry, sand the helmet so that it becomes like a cast.

• Then the product must be painted. Since you need to use two colors, you will have to cover with tape those places where it is supposed to be painted with a different color (paint red, leave those areas where it should be gold and vice versa).

• Separately, you will have to do the back (all the same - cover with glue, fix with fiberglass, sand, paint). The ears on paper are just round, but you can make them out of wood and then glue them to your helmet. To remove and put on the helmet, you can use magnets or a simple manual mechanism (an option with Velcro is also possible).

• Collect Iron Man's neck, chest, back, shoulders, arms, legs, and other body parts in the same way. Try regular fittings to make sure the measurements are in order. When painting, be sure to make sure that no gaps or gaps appear.
• When making a general assembly of parts, give them mobility. A glue gun is very useful for this, and you will also need elastic bands (mostly wide, and narrow for the hands) and plastic snap hooks for large parts.

• If there is a desire and opportunity, you can make glowing elements. To make Iron Man's chest glow, glue a battery-powered LED night light into it, and you can use a flashlight for your hands (just saw off the unnecessary part so that it can easily fit in). By placing the mouse button on the side of the index finger, the wearer of the suit can easily turn on the glow whenever he wants.
• The eyes are made on the basis of LED lights. You will also need a switch, batteries, and wires. Cut out two pieces of clear plastic in the shape of the eyes, and set the lights just below the eye holes.

Video master class

Iron Man Mask step by step Patterns here: http://goo.gl/pJFr6C

A slightly simpler option is to create a papier-mâché mask on the same principle, and cut and sew the suit itself from fabric (yellow or golden turtleneck / jacket and pants, and the rest of the details are red: vest, panties, gloves, knee socks, shoes) ... The relief of some parts of the body can be given with the help of foam rubber.

If your child dreams of being a real superhero, help him fulfill his dream and create a miracle for him in the form of a costume of his favorite character. Or make a cool suit for yourself :)

Iron Man Reactor