Awnings and awnings for the terrace and veranda are an opportunity to give the structure noble appearance and at the same time rationally use the adjacent territory. Depending on the wishes and financial capabilities of the owners of the house, there are many different options for arranging a canopy and awning for a terrace and veranda. Consider all possible options design, their advantages, disadvantages and features.

Awnings and awnings for the terrace and veranda: design features

Today, the word "marquise" is a much broader concept than a few years ago. Retractable fabric structures and vertical frameless partitions designed to protect their wearer from strong wind and sun rays, now also began to be called this term. Due to its wide functional spectrum as well as its ability to significantly decorate adjoining territory These automated awnings have gained widespread popularity among country home owners.

What is the difference between the awning we are used to and the awning? While a conventional awning has a rigid, fixed, fixed frame, the opening level of the awning can be adjusted as desired. Consider what features should be considered if you decide to mount the structure yourself:

• the awning is attached to the wall of the building on one side;
• to fold or twist it does not require dismantling the system;
• the functions of the finished system are fully automated.

Awnings for the veranda - choice of material

The most common material used for the manufacture of awnings and awnings is acrylic canvas. With excellent water-repellent, wind-resistant and anti-reflective properties, this fabric has an aesthetic and elegant appearance. In addition, the temperature range allowed for the use of acrylic is very wide.

The price of acrylic canvas is determined mainly by the country of origin. The cost of a standard 1.5-meter roll on average can be from 800 to 1200 rubles per 1 running meter.

Polyester canvas is also a very common material for creating awnings and awnings due to its cost and characteristics. This fabric has increased durability thanks to the polyurethane impregnation. Because of this, it is often used for car and parking tents.

The cost of one running meter of Korean-made polyester cloth ranges from 250 to 320 rubles. Fabric made in the USA is considered to be of higher quality, and prices for the same amount of material start at 900 rubles.

PVC cloth is another way to decorate the awning. Smooth, glossy surface will perfectly decorate your local area. Moreover, it is the most a budget option of all possible. Prices for this type of fabric start at 150 rubles per running meter. PVC is highly durable, so that the transmission of snow or water is excluded. In this case, the canopy will not sag under the weight of the accumulated precipitation on it. The range of permissible temperatures for use is very wide - from -30 to 50 ° C.

For improvement quality characteristics PVC cloth used for covering awning awnings, it is processed with specialized impregnations:

• Teflon coating improves moisture repellency while protecting fabrics from dirt and UV rays. Teflon-impregnated material will not stretch over time, will not wrinkle or wrinkle;

• antiseptic coating makes the fabric more durable, preventing the possibility of mold on the surface and different kinds fungi;
• UV filters are designed to provide travelers with maximum comfort in sunny weather, giving the fabric anti-reflective properties.

Varieties of awnings and awnings for terraces and verandas

Awnings and canopies for terraces and verandas are different and, depending on the mechanism of the structure, the way of control and the intended purpose, they are divided into several groups.

Terrace and veranda awnings

One of the options for decorating and protecting the terrace from wind and rain are awnings. Depending on the shape of the structure and appearance, they can be divided into the following types: attached and free-standing.

Attached awnings are mounted close to the building, thus forming a space close to one side. This option is most often used to create a terrace near the entrance to the house.

Freestanding awnings- in essence, just a roof, standing on several supports, they are often used to create a parking space for a car.

In shape, awnings are distinguished by straight, inclined and complex awnings. The first option is the simplest and cheapest, it is a single plane fixed on the supports. The second design is more difficult to manufacture and install, however, it allows rainwater or melting snow to drain away without accumulating on the roof. Complex constructions have a curved shape and are used to create an unusual exterior on the site.

Almost anything can serve as a material for making a canopy. The main thing is that its characteristics ensure the resistance of the roof to impact. external conditions... The most common options are:

• corrugated board;
• polycarbonate;
• metal tile;
• slate;
• plexiglass.

At the same time, the frame can be made of wood, metal, concrete and even brick and stone.

Making a canopy with your own hands is quite simple. And the professional flooring for this is the most suitable option... This popular material is easy to purchase in the store and does not require special skills or equipment to work with it. Installation of the canopy takes place in several stages:

• points of support are determined, and in these places pits are dug with a depth of 50-60 cm;
• install vertical supports and fill them with concrete;
• after about a week, when the concrete hardens, horizontal beams are mounted;
• a crate of pipes is attached to the horizontal beams, which will hold the sheets of corrugated board;
• with the help of self-tapping screws, the corrugated board is laid on the crate.

Thus, for minimum costs effort and money, you can equip your own canopy that will protect you from the sun, rain and snow on your site.

Types of awning designs

Depending on the intended purpose, there are showcase (window), greenhouse (balcony), pergola and vertical awnings. Let's consider each type of canopy in more detail.

Showcase (window) the awning is a vertical external curtain. It is designed to protect the premises from direct sunlight. Externally, it is a vertical canvas with a visor in the upper part of the structure, which allows you to move the vertical of the canvas at a distance from window frames... There are options without a visor.

The amount of penetrating sunlight can be easily adjusted by opening or closing hinged structure... The design of such an awning is mostly standard and consists of support brackets located in the middle of the height of the window opening. The distance from the awning to the slopes is on average 10-15 cm. This is done in order to open form the canvas protruded from the wall at a distance of 60-100 cm.

Terrace awnings have a different design, primarily due to their size and windage. They are often called elbow awnings, since in this case you cannot do without a rigid structure in the form of a beam, which is attached to the wall. Due to its size, such an awning has to experience significant bending loads. In order for the rigid frame to withstand all this, bearings are additionally used in the creation of the structure.

Depending on the desire, using various materials and racks of various designs, you can create summer gazebos, rotundas or belvederes, which will become real masterpieces of landscape architecture.

Greenhouse (balcony) awnings- these are structures of two or three sections, which create a "sloping" roof with a canopy. To control the ingress of sunlight, a special longitudinal beam located in the middle of departure. With its help, the awning and visor can be raised and lowered.

Pergola awnings used to create summer awnings around the house, open verandas, pergolas, rotundas, patios and other most popular types of mobile suburban architecture. A feature of this structure is the presence of two or more additional supports designed to increase the strength of the structure and improve its quality characteristics when exposed to wind load.

Vertical awnings – simple construction, which is a vertical wall. They are used to create mobile gazebos, as well as for fencing pergolas.

Awning control mechanisms

Depending on the mechanism of the structure, the following types of awnings are distinguished: basket, lever-roll and awning.

Lever-roll mechanism equipped with two folding brackets. According to the principle of the device, they resemble hands that unwind a web wound on a special roller. Rotating, the mechanism dismisses the awning and opens the awning.

Basket mechanism, or as it is also called domed, is a structure consisting of several arcs that perform a supporting function. Arcs can be of any shape: round, oval, rectangular. They can be of any height and length, but they are all combined. common axis rotation. Such a system is formed using a lanyard mechanism - all arcs are connected with a special cord, which is fixed at the very bottom. Thus, by pulling on the cord, the awning can be assembled, and if the cord is released, the structure will open.

Dimensions of the awning above the veranda: a - the width of the veranda, b - the total width of the awning, c - the width of the canvas, d - the distance between the fasteners (scallops), f - the distance between the slats

Marquisolette- a mechanism designed to ensure maximum stability of extended structures to strong winds. Its design consists of two parts: the upper one, on which the canvas is placed vertically, and the lower one, on which the awning forms a visor. The ratio of parts of the structure can be easily adjusted manually.

Depending on the way the awning is controlled, the following options can be distinguished:

• manual drive;
• electric drive;
• remote control.

The design of the elbow cassette awning: 1 - plastic plugs, 2 - cloth sheet, 3 - fabric cassette, 4 - plastic decorative plugs, 5 - main profile, 6 - silicone dampers, 7 - awning elbows, 8 - mounting brackets, 9 - mechanism finishing the cassette, 10 - steel bearing profile 40x40 cm, 11 - plastic decorative plugs

Proper care of your awning

In order for your awning to serve you as long as possible, it is recommended that you comply with the following operating rules:

• in cold weather, when the awning is not in demand, it is recommended to "preserve" the structure with a specially designed cover, or contact specialists to dismantle the structure intact and safe;

• at least once a year it is necessary to produce Maintenance designs: change the lubricant (especially for retractable awnings) and adjust all elements of the product;
• it is forbidden to hang various kinds of objects on the awning that may harm or provoke the fall of the structure or its parts;
• if your awning model does not have a sensor that regulates the strength of the wind and, according to the conditions, folds the canvas, then the structure requires constant supervision. So, leaving home for long time, it is necessary to roll up the awning so that it will not be blown off by the wind during your absence.

DIY awning creation step by step

Like any other simple construction of this type, the awning can be made independently. To do this, you will need to set aside a few hours of free time, purchase the constituent components and, of course, have a set with you. necessary tools... Consider the step-by-step instructions for installing a conventional window awning:

• first of all it is necessary to do schematic drawing the future awning, taking into account its size, height from the floor to the lower and upper points of the canopy, the width of the awning and the amount of its extension from the wall;

• according to the drawing, purchase material for the canopy. For independent work the best option- acrylic fabric. In addition, it has all the necessary technical characteristics;
• choose and purchase the material from which the frame will be made. Here the undisputed leader is aluminum pipes, since they are very lightweight, but at the same time strong enough to withstand the load created by the awning and do not corrode. Although you can often find frames made of enamelled steel tubes;
• purchase a folding mechanism, and connect it to the frame and canvas - the best option solutions to all functional problems;
• after all the components are purchased, you can proceed with the installation. According to the scheme, the frame is assembled and the fabric is cut out. The folding mechanism is attached to the wall and synchronized with the frame and the canvas.

Thus, if you use a ready-made folding mechanism, you can easily make an awning on your own. On average, this takes 6 to 8 hours.

The frame for the awning can be not only metal, but also wooden. In this case, a bar is used, which is treated with a special antiseptic. It reduces the level of destructive effects of external factors. Then the tree must be painted or opened with ship varnish. However, even if these conditions are met, wooden frame cannot be called very durable. One way or another, the tree is susceptible to drying out and moisture absorption. And insects, in spite of everything preventive measures, can cause significant damage to the material.

Awnings and awnings for a summer residence are not only a wonderful decoration for your site, but an opportunity to use the area adjacent to the house with benefit. No matter how great your financial capabilities are, the price of an awning for a terrace and a veranda will delight you in any case. By creating or choosing ready-made unusual designs, you can give your property an original look and completely new functional qualities.

Of all the variety of curtains, French ones deserve special attention. The unrivaled luxury of undulating folds adds luxury and sophistication to any space. Of course, when making such a splendor to order, the price will be quite high, but you can always sew an awning with your own hands - the curtain will turn out to be no worse.

The history of the emergence of the curtains of the marquis is associated with the period of the reign Louis XIV... It was in those days that the windows of the ballroom and guest rooms in the palaces of France began to be decorated with curtains made of natural silk, which, with a large abundance of lace and shallow horizontal folds resembling waves, emphasized the solemnity and richness of the interior decoration.

At present, the marquise (aka French curtain) is an elegant interior element that falls in wavy folds, which includes:

• fabric represented by muslin, satin, silk, cambric, moire, organza, etc. The main characteristic the fabric chosen for sewing French curtains is elasticity, which contributes to the creation of soft folds;
• textile tape, consisting of a curtain tape for attaching to the cornice and a tape with which assemblies are formed on the curtain;
• various decorative elements- fringe, beads, lace, curtains fixed at the bottom edge for decoration.

Quite often, French marquis curtains are confused with Austrian curtains, since both types have horizontal folds. However, for Austrian curtains, the assembly takes up only a third of the curtain and is located in its lower part, while for French curtains, the assembly is present along the entire length.

The functionality of awning curtains largely depends on the type:

• fabrics. Curtains made from light transparent material, will not hide the room from the rays of the scorching or rising sun, but will serve as an excellent barrier from envious peeping from neighbors from the house opposite. But curtains made of satin, velvet and other opaque fabrics can easily cope with the function of curtains;

• cornice. The curtains can be fastened to a rail cornice, but it will then be impossible to lift them up. When using a curtain rod with manual or remote control the height of the curtains during operation can be adjusted by limiting or increasing the degree of illumination of the room.

Marquis curtains look great both in a single design, and in combination with curtains, lambrequin, thereby contributing to their use in interior design of any style solution.

Marquis curtains in the interior

More recently, awning curtains were popular only for decoration window openings in museums, exhibition, concert halls. Today, French curtains decorate the windows in multi-storey, country houses, offices, government agencies.

The appearance of the awning curtains, the photo of which is presented below, is ideally combined with any interior, be it classicism, art deco, modern, hi-tech or avant-garde.

Airy folds of organza will add some luxury, idleness to the living room, while filling the room with sufficient light and comfort.

Romance, ease and tranquility await the owners in the bedroom, the windows of which are decorated with light French curtains in combination with thick fabric curtains.

Shortened models of awning curtains for the kitchen will be simply irreplaceable, since only the middle of the window or the window sill reach, leaving the lower part of the wall open, which can be used as part of the kitchen.

French curtains look no less attractive in the bathroom, filling the room with the necessary sunlight while hiding from prying eyes.

The elegance of the awning curtains will brighten up the gray everyday life of office life, filling the room with warmth and comfort.

French curtains made of snow-white satin will easily emphasize the respectability and importance of the president's own office.

Thus, French curtains will bring in unique flavor, as well as a piece of pomp and grace in the design of any room. The main thing is to choose the right material, cut the fabric with high quality and sew all the details into a single composition.

Manufacturing technology of French curtains

Before you learn how to sew awning curtains, you need to familiarize yourself with the choice of fabric and its footage.

Calculation and selection of fabric

Despite the variety of types of fabric that can be used in the manufacture of French curtains, most of the awnings are still made of light materials such as silk, nylon, organza. In most cases, this is due to the fact that awning curtains are used in combination with heavy curtains instead of classic options tulle. In this case, the final choice on a particular material depends on the personal preferences of the owner and the general design of the room.

However, before purchasing any type of fabric, it is worth carefully calculating the required footage of the canvas you like. For this:

1. We measure the length of the curtain rod, intended for attaching the curtain, and multiply the resulting value by the assembly factor, which is:

• for silk fabrics - 2.5 m;
• for nylon - 2.2 m;
• for organza - 1.8 m.

2. We measure the height of the curtain, starting from the eaves and ending with the level of the desired length, and again multiply by the assembly indicator, which is slightly different from the previous data, making up:

• for silk fabrics - 2 m;
• for nylon - 2.5 m;
• for organza –3 m.

3. If the dimensions of the required fabric exceed the width of the roll, then before the direct production of the curtain, the fabric cuts will need to be sewn together. In this case, the connecting seam should be placed along the line of attaching the tape. To do this, it is necessary to calculate in advance the width of the step between the scallops and their number, focusing on the following tabular data:

4. It remains to add to the obtained values ​​the allowances for the hem of the upper, lower and side cuts and you can purchase the material.

Thus, the calculation of the required dimensions of the canvas for the manufacture of the awning curtain is a rather laborious task, requiring increased attention to taking into account the assembly factors corresponding to the type of fabric. The slightest inconsistency of the canvas with the required dimensions will lead to the displacement of the side seams towards the central assembly, violating all the aesthetics of the magnificent decor.

Material preparation

Before proceeding with cutting the curtains, the acquired fabric must be decated:

• a dense canvas is soaked for 15 minutes in lukewarm water, after which it is slightly wrung out, dries well and ironed;
• too bulky canvases are carefully ironed with the steam function;
• thin fabric like organza is simply ironed without being subjected to steam treatment.

The decating stage, like all other stages of creating French curtains, is very important, since all decatting actions are aimed at protecting finished product from possible shrinkage of the material after the first wash.

Cutting material

In order to avoid distortions during marking and subsequent cutting of the canvas, it is necessary to prepare in advance work surface, removing all unnecessary items away, after which you can start work, the essence of which is as follows:

1. We lay out and straighten the fabric face down on the work table.
2. We trim the edges of the canvas.
3. We set aside the length of the curtain, taking into account the allowances for hemming the top (5 cm) and bottom (4 cm) of the product.
4. We outline an allowance for processing the side seam of 3-4 cm.
5. From the side seam allowance line, set aside the width of the fold and, in the designated place, pull the thread out of the fabric along the entire length. The track obtained from the removal of the thread will be the middle of the tape. This manipulation reduces the marking time and ensures the evenness of the guide along the entire height of the curtain.
6. Similarly, we mark the remaining folds along the entire width of the canvas.
7. From the line of the last guide, we mark an allowance for the second side seam, if the width of the curtain corresponds to the width of the fabric, or an allowance (1 cm) for sewing fabrics, if the width of the canvas is less than the width of the future curtain.
8. We cut out the curtain after all the markings.

When using two fabric cuts, the marking on the second fabric is done in the same way as the first.

The process of sewing curtains

After all preparatory work you can safely proceed to the last stage of making curtains:

1. Sew the fabric cuts into a single fabric. The resulting seams are ironed from the inside out in different directions. In this case, the edges do not need to be additionally processed with a zigzag seam, since the entire allowance will be closed later with a tape.

2. Bend, sew and iron the side seams.

3. On the upper cut of the fabric we outline and build in darts, the main purpose of which is to prevent the bottom of the finished curtain from deviating towards the middle of the window. We calculate the size of the darts as follows:

• we calculate the surplus of fabric = the length of the cornice x the coefficient of assembly in width - the length of the cornice;
• we calculate the depth of the dart = excess fabric / the number of assembly steps (scallops);
• since the dart is deposited on the material on both sides of the guide, the depth of the dart must be divided by 2;
• the length of the darts (20-40 cm) is interrelated with the length of the curtains: the shorter the fabric, the shorter the dart will be.

4. Iron the finished darts in one direction.

5. Sewing the braid to obtain gathers, starting from the bottom of the curtain, while stepping back from the edge at the distance of the allowance for hemming the material. The ends of the strings at the top and bottom of the stitched tape must be tied together.

6. When all the straps have been sewn on, the bottom seam is hemmed to close all open cuts of the strap.

7. We cut the upper cut of the curtain and attach the curtain tape.

8. Iron out again all the seams and the curtain itself.

9. Pulling the strings on top of the curtain tape, gather the fabric to the required size. The length of the stretched threads should be carefully hidden in the place where the braid is sewn, since during washing it will be necessary to straighten the fabric again.

The finished curtain can only be fixed on the cornice and enjoy its extraordinary beauty.

Despite the many nuances that must be taken into account when making an awning, sewing curtains will not take much time, although for the sake of such beauty it is absolutely not a pity to spend all weekends and holidays.

Terrace awning is quite simple, but very functional solution for those who want to make small canopy giving, but at the same time does not want to mess with it a lot. Terrace awning can shelter you from rain, save you from direct sunlight on a hot summer day, or just create a cozy place on your terrace.

Because awning is a small fabric canopy, it is also able to shelter your car from hail, if you place it above the place in the country where you usually put your car. A carport is necessary if you do not have a garage, but would like to keep your car looking good for as long as possible.

A carport is often used for summer car services. A carport is also great if you want to expand your garage's workspace. The main advantage of the awning is that it can be easily dismantled or rolled up if it is in your this moment need not.

The first marquises began to appear in the 19th century, and immediately became very widespread. Awnings began to be placed in markets to protect products from the harmful effects of sunlight and other adverse weather conditions. But the first marquis had many shortcomings, and they very quickly fell into disrepair.

With the advent of the first cars, awnings began to be used as a carport. Modern technologies have made great strides forward, and the current awnings are made of high quality materials, sliding awnings have appeared. Modern awnings do not deteriorate from moisture, cold and sunlight. Retractable awnings are now used almost everywhere. Also high choice fabrics for such awnings allows you to come up with and implement not only various awning designs, but also create automated retractable awnings. Today, modern retractable awnings can be divided into several main types.

Types of awnings

• Pergola. The frame of such a canopy is attached to the structure, and the front part is attached to the beams. The fabric unfolds freely and rolls up around the perimeter.

• Basket awning. It performs the function of a visor, has a semicircular shape and is most often placed above the entrance to the room. Sometimes it is placed above the windows. For its appearance, similar to an inverted basket, it got its name.

• Elbow awning. Has a triangular shape, enough robust construction, allows you to create long awnings. For the resemblance to human hands bent at the elbow and received such a name. There can be four such elbows, depending on the length of the canopy.

• Facade awnings... These awnings serve the same function as vertical blinds. Unwind and rewind along the height of the facade of the building, hence the name. They can be coiled into a case, or inclined.

Building

So, today there are a huge number of terrace awnings on the market. various designs usually made of aluminum, colors and shapes. But for a store awning for terraces, you will have to pay tens of thousands of rubles, or even more. While a do-it-yourself awning for terraces will cost several times less. In addition, you can create your own, choose the most suitable material, as well as adapt the terrace awning to your site.

The first step is to decide on the type of awning. It can be either a front awning or a pergola, as well as an elbow or basket awning. All these types can be made by hand. But if you have never had to make awnings for terraces before, we recommend starting with a small window, which is a small window canopy. Other awnings can also be made by hand, but they require precise measurements and drawings.

So, the main step in making an awning for a summer residence with your own hands will be the choice of material. Honestly, any waterproof fabric is suitable for the awning, but if you want your awning to serve you for at least 5 years, you need to choose a dense, but lightweight fabric.

Awning fabrics

• acrylic;
• polyester;
• polyvinylchloride.

Acrylic- material very resistant to weather conditions, perfectly retains its appearance, is well cleaned, does not fade in the sun.

Polyester - very resistant to ultraviolet light, frost-resistant, increased resistance to abrasion, very durable.

Polyvinylchloride is a transparent plastic fabric that does not allow moisture to pass through, and is resistant to heat.

In principle, you can choose your own fabric, the main thing is that the material is light so that it can be mounted on a wooden frame, but dense. Next, you need to make a frame and frame for the awning. If the material is lightweight, the canopy can be made from wooden beams... If you are making an elbow awning for terraces, you will need 3 × 3 bars, as well as metal corners and self-tapping screws.

The bars must be sawed so that you get 2 right-angled triangles, a kind of human arms bent at the elbows, in order to further attach them to the wall. It is quite difficult to make an automated awning with your own hands, so you will have to assemble and disassemble the awning manually. But if you still do not want to do this every time, you can buy a ready-made mechanism for assembling an automated awning with your own hands, since there are such on the market. So, first we assemble the frame for the future awning.

The next step in making an awning with your own hands will be the installation of the frame, on the wall and fixing the canopy. And we do not recommend fixing the canopy with Velcro, the canopy will still come off sooner or later from the strong wind. The canopy is best fixed to the wall, tightly with screws or nails. If necessary, the canopy can be neatly rolled up, if you do not need it, or, on the contrary, unfold if the sun suddenly peeped out or it rained, and you suddenly needed a shelter. The dimensions of the awning depend on the size of the window or terrace over which you are making the awning.

Another construction that we will consider in this article is from aluminum tubes... This design is quite lightweight and durable at the same time. So, such a structure with one side will be installed on the wall of the building, it will be easy to fold and unfold. To make an awning from aluminum tubes you will need:

• Aluminum tubes for the frame.
• Folding mechanism.
• Awning made of durable fabric.

First you need to attach the folding mechanism to the building., as a rule, all hardware for assembly and fastening are included. Then a frame is made from aluminum tubes, and it is located slightly below the mechanism, so that the awning is at an angle. The frame is hinged to the brackets. The edge of the awning is attached to the frame.

5318 0 0

How to install awnings on windows: step by step guide

The article is addressed to those readers who do not want to cover their windows with curtains or blinds during the daytime. If the sun's rays bother you, pay attention to awnings - they do not reduce the level of illumination. And how to properly install awnings on windows with your own hands, you will learn from this article.

A few words about what we will install

Awnings are folding awnings designed to shade window and doorways... In addition to protecting from the sun's rays, these structures protect the premises from wind and rain.

On sale awnings are presented with dome, elbow, pergola and facade modifications. For the arrangement of residential real estate, facade awnings are suitable, or as they are also called, window type, since the rest of the modifications are designed for shading large areas.

There are 3 types of window awnings:

• Vertical - the canvas is rolled up (cartridge);
• Inclined - folding structures that look like a large visor;
• Marquisolettes - the canvas is unwound in a vertically inclined way;
• Marquis - located on the skylights.

Externally, window awnings are subdivided into canopies with a front facing cover, with a front rag guard and modifications without any guard. the fence is only needed when the canopy is assembled. When choosing awnings for windows, you need to remember that the price of models with a front cover is twice as high as the cost of models without a cover.

In terms of the degree of automation, models with an electric drive and with a manual gate (kurbel) differ. Of course, the price of electrical modifications with a remote control is significantly higher than the cost of analogs with manual control.

Installing an electric canopy on brick walls

To begin with, we unpack the awning, check the complete set and lay out all the structural elements so that they are at hand and it is convenient to install them. The complete set includes such elements as:

• Canopy - ready node looks like a big roll on a bar with metal box and metal guides;

• Control panel - a box with keys (down, up and pause), allows you to control the awning without leaving the house and without using the remote control;

• The remote control (RC) duplicates the commands that can be set from the main control;
• Wind sensor - a device that looks like a fan, sends a signal to the control panel about a strong wind, as a result of which the canopy is automatically folded;
• Fastening brackets and hardware for them.

Installation instructions are as follows:

• Determine the location of the canopy, taking into account the width of the device;

• We make markings for the installation of brackets;

Before installation, check the mounting instructions at what distance and in what position the brackets for the purchased model are attached.

• Using the markings made, we drill holes for the fasteners included in the kit;

If the wall is old and not strong enough, the standard fasteners can be replaced with longer ones. anchor bolts... In special cases, for installation, through holes can be drilled through the entire wall, and bolted studs can be laid in them from inside the room and outside the house.

• After the brackets are installed, we raise and install the canopy in them;
• Moving the canopy to the right and left, we ensure that it becomes exactly relative to the mountings;

On the side of the box - cable for connecting the drive to the control panel

• We fix the canopy in the fasteners with the bolts included in the kit;

• A hex wrench in the side of the box is used to adjust the angle of inclination of the canopy;

The adjusting screw may be located differently than shown in the photo, since the design of products from other manufacturers may have its own characteristics.

• A wind sensor unit is installed in the immediate vicinity of the canopy;

• The electric drive and control elements are connected in accordance with the diagram from the awning kit;
• A trial run of the awning is carried out, after which the installation can be considered complete.

Installing a manual canopy on a frame house clad with siding

Awnings are almost a finished product that you buy and screw to the wall above the opening. If mounting surface brick or concrete, then there are no problems with the installation. But, if the wall is assembled from SIP panels and lined with plastic or metal, everything will be somewhat more complicated.

Consider how to cope with a difficult installation on siding, so that installed structure held firmly and looked neat.

• In accordance with the plan of the construction site, the location of the overlap is determined, and this area is marked with outside walls;

Awnings are attached to massive screws or bolts, and the walls frame house not strong enough to withstand such a load. Therefore, the installation must be carried out at the section of the wall and ceiling strapping.

• At the level of the location of the overlap, Bottom part siding panels;

In order to dismantle and in reverse order to install the siding, you will need a special tool that can be ordered and purchased along with the siding. If there is no such tool, it can be made by bending a thin but strong metal plate crochet.

• The opened panel can be removed completely;
• In accordance with the location of the window, the distance at which the canopy mounts will be installed is measured;

• Canopy brackets are bolted;

Taking into account the weight of the assembled awning, we fix the brackets so that the fixing bolts go through the strapping beam. From the inside, we screw the main and lock nut onto the bolt through the washer.

• In accordance with the distance between the installed holders, the length of the pieces to be cut is marked on the removed bar;
• According to the markings made, it is cut required amount pieces of the panel in order to close the openings between the holders;

• The cut pieces of the strip are installed in the openings from the bracket to the bracket;

• A visor is mounted on the installed brackets;

• The structure of the awning is unpacked and installed in the brackets;

• The structure embedded in the brackets is horizontally aligned and fixed with bolts.

Let it not be surprising that there is no frontal barrier, since the photo report shows an inexpensive modification of the awning, which is not equipped with a front cover.

At this point, the installation can be considered complete. It remains to insert the curb into the loop of the drive mechanism and bring the canopy into a working (open) state.

Conclusion

Now you know how the awning is installed over the window, which means you can handle the installation yourself. If you have any questions during the installation, ask them in the comments. Also, don't forget to watch the video in this article.

December 5, 2016

If you want to express gratitude, add clarification or objection, ask the author something - add a comment or say thank you!

This is a very useful thing in auto travel, if you buy it ready-made, it is not cheap (from 10,000 rubles for a modest tent 2x2 meters). We thought and developed the concept of a car awning with dimensions of almost 3 by 3 meters, under which you can freely place a camping table and chairs and hide from the sun (or rain) during parking.

We will need 6 m of rip-stop fabric, which can be bought in camping equipment stores, folding tent racks (we bought 4 racks 1.9 m high, the height of our car), pegs and rope for stretching, thick cordura-type fabric for covers (we were lucky to find both fabrics of the same color), a measured zipper and clasps to it, a sling and "trident" fasteners. The awning will be attached to the trunk crossbar, which, in turn, is attached to the roof rails. Our version stretches over the tailgate so that under the awning it is possible to safely load things into the luggage compartment in the rain, but it is possible to attach it along the side of the car, in this case, you can think of attachment directly to the railing. Consumables, excluding the cost of the trunk, cost 2,500 rubles - feel the difference.

I cut the fabric into two pieces of 3 m. The length of the luggage bar is 140 cm, so one piece of fabric had to be reduced in width to the same 140 cm, and from the second I cut one corner. The awning will look like this (dimensions are in cm):

Before sewing the panels, I cut out corners from dense fabric for the cover, which must be sewn in the corners of the awning, where there will be eyelets for the racks (see drawing). I additionally strengthened the corners with circles from the same fabric:

Having cut out the corners, I find that there is a place for sewing machine already taken:

The cat has to be exposed. Sew on the corners:

On the edge of the awning farthest from the crossbar, I have provided a pocket in which the folded racks will be hidden (see drawing), so I sew the corners not on the edge, but taking into account the width of the pocket:

Now I sew two panels, stitching the junction more tightly:

From the remnants of the fabric I make a bag for the pegs:

I took the awning to the workshop and put on the eyelets:

Now you need to sew the cover. Its length is 140 cm, and I determined its width by folding the awning together with the racks into a roll and measuring its girth (I gave a margin, of course). I sew a zipper between two strips of dense fabric. It is especially difficult to insert the second lock into the measured zipper, towards the first (my husband helped me, I absolutely could not do it):

To one side I sew a central drawstring for the luggage bar, side loops for it (made from a wide strap) and straps for tightening the cover assembly with an awning. I sew on the return lines with the "tridents" sewn on the other side of the cover:

Now I sew the awning itself to the cover:

The most difficult thing is to sew the bottoms into the cover:

Now you can assemble the structure. Having folded the awning in half, we fill the racks in the pocket:

We twist the awning into a roll (it is much easier to wind it on the racks than just twist the fabric, my husband came up with the idea with a pocket):

We fill the roll into the cover, remove the rope for stretching and a bag with pegs there:

Awning assembly, the cover is put on the crossbar of the trunk (while without fasteners for the roof rails, they will be located between the central drawstring and the side loops from the sling):

The tests of the awning were carried out during a three-day off-road trip with our auto club during the November holidays. We put up an awning in the evening. It was frosty at night, so frost formed on the tent. View from above:

A table and chairs can easily fit under the awning, I think it can accommodate up to 4 people:

Tests have shown that the tent pegs are short and weakly hold the stretch marks (at night a couple of racks fell from the wind), you need to think about more powerful and longer stakes (you will have to sew a new bag :). Also, the panel itself is not very tightly stretched; during the rain, water will collect on it. Center rack I don't want to put it - this will limit the freedom of placement under the awning. You can put higher racks at the ends of the main panel, and lower racks on the side ones ... In general, I hope this master class will be useful to lovers of autotravel. Comments and ideas for fixing the shortcomings are welcome :)