Coin for kitchen How to install views. We work out every trifle: Kitchen legs Adjustable fastening of legs for tabletop

A variety of furniture fittings largely determines the practicality and functionality of the interior item, and also affects its external aesthetics. We offer to find out what should be the feet for furniture so that they serve as longer as possible, and the premises itself acquired an attractiveness, a luxurious look.

Furniture legs and supports, as in the photo, is a variety of fittings for furniture of various purposes, shape, colors. Often, such components are made in the same style and color as the object itself, so harmoniously combined with him, complement it with their beauty. However, it is not necessary to think that they perform exclusively decorative function. Such products are characterized by a high functional load, so indispensable in the manufacture of cabinets, tumb, chest and so on:

initially, we note the support function - due to the presence of such structural elements, the cabinets are steadily on the base, it does not stick and not thrown. Many furniture legs are equipped with the ability to adjust their heights, as well as slope. This property sliding models allows you to securely install the wardrobe even on uneven semi. This fact is primarily for a comfortable, safe use furniture subject;
no less important feature of the furniture fittings leg. The feet for the table protect the bottom of the design from the appearance of scratches, chips of another kind of damage. The better the product is made, the more effectively it copes with the protective function;
in addition, the legs of the bedside tables provide the user with high comfort when using the piece of furniture.

Telescopic models have the opportunity to choose the height of the furniture installation, which allows a person to choose the optimal height from the point of view of ergonomics and its own comfort.

Views

Absolutely all existing types of furniture legs today make it possible to establish the interaction of the design with other items in the room. Such small elements in size make the design completed, emphasize the space with conciseness, comfort. Without the most ordinary legs, it is difficult to present a comfortable apartment building today. Such mounting devices are able to give furniture stability, luxurious, stylish look. But what type of similar products prefer? Describe further the main of them:

ordinary stands without the adjustment function of their height are available at cost. Often, such legs have a concise design without special decorative elements;
legs with the possibility of adjusting the height of the furniture. Combine aesthetic appeal and high functionality;
decorative legs are used to decorate the furniture item, as designers give them their own hands original view. Figure supports may have a non-standard form, attractive coating, of different kind Decorations. For example, carved furniture legs protrude with an independent element of the room design.

Materials manufacturing

Today you can see a huge variety: smooth, bent leg for furniture, with the ability to change the height and without. But first of all it is important to pay attention to the material manufacturing material:

metal - look very attractive, durable, durable, manufactured according to drawings from such metals as chromium, aluminum. Chrome is heavier than aluminum, but also a stronger. Chrome prefer the owners of modern interiors for which the durability and strength of furniture are important. Chrome-plated legs are perfect for an interior in high-tech style, which uses a lot of glass, metal. The most original form for metal support is a wheel. Wheels can be used for furniture a very original design;
from array of wood are excellent for wooden furniture. If durable wood is used for the manufacture of the product, it will last for a long timewill look luxurious and expensive. To give strength to the cheap rocks of wood apply a metallic support;
plastic supports look not very attractive, but have a wide sizes, high functionality.

Plastic foot optimally use for kitchen furniture or headset at the cottage.

Child Nuances

When choosing a support, it is important to pay for the following points.

Choice criterion	Characteristic
Having a soft lining for furniture legs	Protective linings on the feet of furniture feet do not give the leg damage the bottom of the furniture. Also for their manufacture applies felt. The felt substrate is very effective and available in price, it extends the service life of the support. Therefore, it is not necessary to give up the acquisition of such gaskets. Stickers on the furniture legs can be chosen in the store. The choice of lining shapes is wide.
Material of manufacture	More durable and practical in use metal models, slightly less - wooden and plastic. However, when the manufacturer's material is selected, much depends on the design features and its stylistic direction of the decor. For laconic high-tech, only metal models are suitable, for country - wooden supports.
Design	The exterior aesthetics of the structure should fully approach the aesthetics headset, so when choosing such products, be sure to capture its photo to the store. This will allow you not to make a mistake in choosing and pick up the most attractive supports.

Video

The table is the necessary attribute of kitchen furniture. To date, manufacturers for the production of tables apply a lot of materials. Great variety of shapes for tables for the table, they are more than twenty. IN traditional option There are four legs. In most cases, standard models have a square table top or rectangular.

Wooden dining table rectangular shape With four legs

Table with three legs is usually round. It can be used as a small coffee table or as a dining area.

Round wooden table table with three legs

Produce tables and with two legs, they can be of various typesBut mostly distributed models having two x-shaped legs or durable made of array.

Wooden table S. X-shaped legs Complete with armchairs for the country area

The legs of the table are attached to the kings of the support frame, and they, in turn, fasten the worktop

Many masters know that the incorrectly attached legs are the root cause that the table will swing and stand under the tilt. There are regulatory supports that can correct the large percentage of inclination, but still a high-quality assembly has paramount importance.

There are several options for fastening legs to table tops:

Attaching the leg with surface plates

Attaching legs with T-shaped nuts

Fastening the table tops to the tsargs of the table without using additional accessories with screws

The use of small metal Z-brackets - another popular method of attaching table top

Fixing with surface plates	Suppose you bought legs without appropriate fittings. To install them, you will need bolts with ear and eyeles for larger tables and braided the threaded for small.
Fixing on T-shaped nuts	This mounting option is suitable if you intend to restore the facial plane of the table and thus give the interior updated look. You have in stock should be T-shaped nuts, bolts with ear and eyeles.
Fastening on screws	This is the usual and tested way to attach the surface of the table to the tsargam without use. auxiliary fittings. Suitable for furniture classic option.
Application of z-shaped holders	The use of small iron z-fasteners is another, which is popular for the fixation method. The main advantages this method - Low cost, simple and reliable installation.
Application of wooden clamps	Easy and durable method of attaching table tops without using purchasing fittings. They are similar to Z-shaped holders. They are made from any trimming, it suffices to observe the orientation of the fibers.
Use eight holders	These metal fasteners are widely used when attaching countertops. They are two species - with washers of the same and different magnitude.
Applying spacers with grooves	In this case, 2 or 3 auxiliary struts with grooves of a rectangular shape are attached to the kings of the kit with the grooves of a rectangular shape, the length of which is 10-15 mm.

The use of homemade wooden clamps is simple and reliable way Fastening countertops to a podstol without purchasing fittings

Steel fasteners-eight - option using inexpensive fittings

In this case, the headset is fixed with two or three additional spacers with rectangular grooves with a length of 10-15 mm.

Necessary materials

Materials that are used for the manufacture of tables, most different, tell about some of them.

Suitable for this array different breeds Tree, for example, coniferous, oak, etc. If you are a novice master, it is better to apply pine, as it is easy to process. It should be remembered that such furniture burns out, absorbs odors, liquid, poorly tolerate temperature change. Of the advantages - the material is environmentally friendly, strong, looks exquisite.
Massive pine for the manufacture of table with their own hands
Chipboard is rather popular for the production of furniture material. In the manufacture, dry chips and resins are used. From flaws, environmental risks can be noted. Advantage - relatively cheap price.
Chipboard inexpensive option Material for manufacture dining table.
MDF - compared to chipboard more eco-friendly, but also more expensive. In the manufacture, use wood chips, carbide resins, modified melamine. The disadvantage - freely lights up, the risk of fire is possible even from rapidly heating items.
MDF is suitable for the manufacture of a table, it is better and eco-friendly
Furniture shield - the complete opposite of MDF and chipboard. Acceptable price equivalent, material durable and environmentally friendly. Made from glued bars, pulled by the press.
Furniture shield - square or rectangular sheets of wood, which are manufactured by the method of gluing with each other wooden stations in width or length
Metal - In most cases, a stainless steel is used. It will be expensive to cost such a thing, but this table will attract attention.
Products out of stainless steel unpretentious in care, durable, practical, universal in use

These materials are suitable for both countertops and legs. They also make the legs plastic, chrome, wrought-iron. When choosing, rely on your preferences.

Support furniture chrome plated for tables with side mount

Coffee table with wrought-iron legs

White round table from plastic for street

Required tools

Required set of tools for making and assembling table

For the manufacture requires such tools: plans, machine for grinding, electrolovik, saw, drill, drill, sandpaper, screwdriver, self-tapping screws, glue, wanks, clamps, roulette, pencil, protective equipment - glasses, gloves.

Production Process: Step-by-step instruction

Drawing of a wooden table with four legs

At first B. obligatory Need to make a drawing. Decide which legs you will be attached to - purchased or manufacture yourself. The form can be any.

Figure bales or legs for homemade table

If the table top is a width of 0.8 m, then the legs should be a length of 1.2 m. In order for the countertop to be smooth, treat it with a grinding machine. Between the joints should not be gaps. So that the countertop is not deformed from high humidity, the boards must be put on the counter texture.

Boards for tabletops with a thickness of at least 30cm

At the ends of the connectable boards, it is necessary to drill holes with a depth of 8 cm, the gap between which is kept in the range of 10-15 cm. Prepared places We pass by the sandpaper and lubricate the edges and holes. Insert the seasons into the holes, so connect the worktop. Excess glue remove.

Options for fastening legs to a wooden table

With the help of glue and screws, we connect transverse and equity boards with legs. On top of the latter, we do two recesses to attach the worktop. We are waiting for twelve hours and mount it. The design is covered with varnish, verse or paint.

Table with attached table top, frame and legs

Important! Applying the veil, consider the following: Competently choose the diluent, the plane before the coating must be carefully processed by the sandpaper, the main thing is to properly regulate the gun (the form of the torch should be oval, and the layer that you apply should be overlapped by half).

Cover lacquer or wax to protect the top layer

After reading the options for fastening the legs to the tabletop, you will not be difficult to make the table with your own hands, thereby updating the interior of such an original thing.

Video: Massive tabletop. My fastening option

The table is a mandatory piece of furniture in the kitchen. Today, manufacturers for the manufacture of tables use a huge amount of materials. Options for the kitchen table, you can also count at least two tens.

How much should it be?

IN classic version The kitchen table has four legs. Basically, these are traditional models with square and rectangular countertops. The table on three legs almost always has round shape. It can be a small coffee table or a full dining option. The table on two legs for the kitchen can be made in several species, but most often there are models with two x-shaped legs or resistant legs from the wood array.

Materials

Chrome metal

Metal legs are one of the most common types of support for kitchen tables. The exceptional strength of the material ensures their reliability. Such legs are considered resistant not only due to a thorough design, but also due to the plugs that are installed to protect against glide on the floor. Manufacturers and craftsmen who have decided to make the table with their own hands, the metal legs attract attention to low valuable and durability. The coating of such supports may be different, they can be painted or chrome.

Worn metal

Tables with wrought-iron feet have a number of benefits. First, they are very durable and never need to be repaired. Secondly, the model with iron legs has maximum stability, it is almost impossible to tilt or turn it over. Thirdly, tables with forged legs are quite universal, easily fit into any interior and do not conflict with interior items that have no wrought elements. Fourth, forged legs are quite simple in care and there are no special recommendations for their content.

Wooden

Tables are natural tree - This is a classic and the oldest tradition of our country. Such furniture always looks very beautiful and expensive. Wooden legs For the kitchen table, there may be different shapes: round, square or carved. Models with carved or accurate legs are the most beautiful and elegant, and often the overall impression of furniture depends on the mastery of craftsmen. The tree is covered with varnish and grind, the layers do as much as necessary to obtain a beautiful smooth surface.

Plastic

Plastic legs are in great demand due to their low cost. In addition, the furniture legs made of polyurethane qualitative and reliable, conquering beautiful carvings. Feet from this material are perfectly combined with all table tops, regardless of the material from which they are produced. Polymer materials Absolutely not susceptible to moisture and evaporation. Another advantage of the legs from polyurethane is their hardship, which makes it possible to prevent the rapid spread of fire in the room in case of fire.

Designer finds

The most common option of the legs to the trendy tables for the kitchen is chrome-plated supports, ideally harmonizing with retro style, minimalism and high-tech. If you search the latest design tables and supports to them, you can find quite unusual execution. For example, supports can be too wide or, on the contrary, it is extremely too long. Often, the form of supports in the fantasy designer suddenly becomes curved or decorated with art decoration.

Special attention to the legs are attached if they are under transparent countertop. In this case, all the magnificence beautiful legs It is excellent visually visually, so a creative approach to their execution is required. As a support, can act Curved at an angle of 90 degrees a box of metal with cross sectionwhich plays the role of the central support. Luxury design is obtained using four elegantly curved legs, similar to insect paws.

Special luxury attached to the tables openwork metal legs. They can fill in almost the entire space under it or part of it, be in the form geometric Figure Or depict the leaves of the plant.

Extravagant models, successfully inscribed in modern interior, You can call kitchen tables with X-shaped legs made of a square with a square cross section. The most harmonious looks at the end of the corner and converging between themselves in the middle.

Pledge of strength and stability

It is known to specialists that unprofessionally installed legs are the cause of shaking and tilt of the table. And although adjustable supports can correct the slope, but 99% of the table quality depends on the correct assembly.

Two popular methods of fastening legs can be distinguished: installation of surface plates and installation using T-shaped nuts.

Installation of surface plates

If you purchased legs without fittings installed in them, you will have to do it yourself. To do this, you must have a bolts with an eye and eyeles for big tables And threaded brazen for small tables.
The bolts with an eye and eye need to verify on the check plate and make sure that the screws will be provided with a compatible size.
Install the bolts with an eye and an eye into the table of the table, and the center of the legs mark the marker or pencil. Then it is necessary to make a hole in the leg and strongly spin the bolt into the upper part of each leg.
Turn the table top with the invalion side or put on the side.
Plates set in all four corners of the table top with four screws.
Then you need to fasten the top of the bolt with the eye and eye in the plate. Carry out to complete tightening.
After installing all four legs, put the table to the floor and make sure that it stands exactly.

The kitchen is simply impossible to imagine without the presence of a table, which performs two functions at once, one of them is a meal, the second is its preparation. You can buy this piece of furniture in any store of the respective goods, but it is not always possible to choose the model that will be suitable for the dimensions and design of a certain room, so it is better to make the table with your own hands.

Figure 1. Dining wooden table You can make it yourself, so you can make it the size you need and forms.

In fig. 1 You can see the design of the table, which will be considered in the example. For the work process, you can rent everything necessary equipment For wood processing, avoiding its acquisition. As a result, you can get not only original, but also strong tablewhich will fit into the interior decorated in any style.

Tools and materials:

acrylic composition;
putty;
bar;
furniture stove;
fastening fittings;
lobzik;
glue on wood;
clamp;
sander.

Preparation before starting work

Tools for the manufacture of a table: Lobzik, Drill, Selfless, Roulette, Rule, Pencil.

In order to make the table with your own hands, you need to prepare a furniture plate, the thickness of which can be equal to the limit of 40-45 mm, whereas its width can vary from 600 to 800 mm, the slab length can be any, but traditionally it is 1200-1400 mm . As a tabletop, it is permissible to use the corresponding element for kitchen headsetto fit it under specifications. If it is not possible to purchase a one-piece countertop, then it is permissible to replace it with a set of boards that you have to glue.

The legs can be made using a bar, which has a square cross section, equal to 60x60 mm or 70x70 mm. Futures can perform curly wooden or steel products. The rigidity of the design will be able to have a bruus, the cross section of which is 40x40 mm, and the length should be such that it is possible to circle a worktop around the perimeter. We make a table using fasteners, it can be represented different models, you will also need fasteners, namely bolts, screws and nuts.

Table manufacturing technology

Boards and timber must be placed the desired length and cut off on the workpiece.

Before making the table, it is necessary to think about which design it will have, what technical solutions It will be used in the process of its manufacture, as it will be possible to separate it, these components will allow you to get a full-fledged aesthetic piece of furniture. This stage involves drawing up a sketch of specific sizes Designs.

For the table it is necessary to choose the view of the tabletop that will most simply make for the master, and the one that will most harmoniously look in the interior of the room. There are two types of worktop execution, one of which is characterized by simplicity, the second is a high degree of aesthetics and originality.

In preferred for the table, the tabletop performed on the basis of the glued bar, then it will appear as the most simple option Designs, excluding a worktop based on the finished furniture plate.

In order to make a tabletop from a bar, it is necessary to use a saw, to replace electrical equipment: Lobzik, Piloram, etc.

For fastening legs use corners.

The bar must be chopped on the workpiece, giving it the desired length. And after it is possible to make careful treatment of conjugated surfaces. This procedure can assume and grinding.

The ends of the blanks must be covered with glue to work on wood, strengthening through clamps on an even base until the moment of complete drying. As soon as the tabletop is ready, its surface need to be thoroughly glued by the manual method or using grinding machineThen to remove the chamfers around the perimeter and rounded the corners.

The second view of the tabletop can be decorated with tiles, which is able to give the product high aesthetic and consumer qualities. In the process of manufacture, it is permissible to use whole array Woods, replace which can be a whole furniture slab. The inner part of the table top needs to be eliminated to a depth, which is equivalent to the thickness of the tile, and it should be noted that the adhesive layer also has its thickness, which manifests itself when laying products. In order to achieve even greater aesthetics, it is permissible to form a border, located on the perimeter of the table top, equal to 70 mm. More accurately calculate the size of the border, it takes into account the dimensions tile tile. It is possible to produce work on the elimination of the wood layer, for example, a chisel or by means of a manual milling method.

On the formed reason, by means of traditional adhesive "Bustilat", you can lay a tile, while its height must coincide with the border height. Once the glue dries, you can continue the process of manufacturing the design.

To connect the legs of the table and countertops use self-tapping screws or special accessories.

At the stage of fastening the legs of the table, the installation fittings will be used. In advance on the legs, it is necessary to carry out the drilling of the holes, the diameter of which should be 1 mm less than the corresponding sized screws. Now you can strengthen the fittings on the legs.

The next step will increase the characteristics of the rigidity of the future design, for this, from the inside of the table top around the perimeter, it is necessary to consolidate the harvested bar, which will perform the role of the Tsargi table. The installation of the bar must be carried out after the markup, providing sufficient space for the legs. Then you can match the legs and installation fittings to the tabletop and the king.

Table design design

Application on the tabletop tile.

Made the table with your own hands, in the last stage it is necessary to finally separate the design. Before this process, all elements have to be carefully polished to get rid of the most minor roughness. Final finish Allows also to show the unique natural structure of the wood.

Before making the table with your own hands, you need to choose the right wood that should have high quality, be well dried by proper technology. Otherwise, the design will eventually change its linear dimensions. This may occur when wood with high moisture content was used. Over time, it will evaporate and deform the table. But even well-dried wood needs to be protected from external negative factors, because the kitchen is characterized by conditions with high humidity. In addition, the table is often used to cook food, which can be accompanied by an effect on the tabletop of harmful substances for wood.

The table with your own hands after the completion of the manufacturing process must be covered with varnish, replaced which can be waxed. Wood is not always deprived of flaws or knots, which need to be treated with putty, and after passing and decorated with acrylic composition.

The surface of all the elements of the table itself will be covered with varnish in several layers. Than they are more, the more attractive will be the appearance of the finished product.

After all the work on the cutting of wood is completed, it is necessary to carefully remove the work room, especially this concerns the painting or varnishing stage. After all, dustiness can cause poor quality staining. The next step will be drying, which must be implemented in conditions warm premises. You can choose a varnish, which will be able to give wood the desired shade and type of valuable rocks. In addition, he will provide good defense Elements from damage and fast wear.

Making a children's table

Before making the table with your own hands for the nursery, a one-piece array should be prepared, which will form the basis of the table top. We will need blanks for the legs of a bar with a cross section of 40x40 mm. Based on power carcass There will be 4 brus. Model children's table May be equal to 500 mm or higher.

The connection of the structural elements should be made according to the "groove-spike" principle, for this reason, by means of the end cutter, you need to form grooves in the places of fastening of the legs. What is the place to be placed for grooves, combining pair elements, and after the right place should be equipped deaf hole. Its diameter should be equivalent to the thickness of the groove, while its depth is usually equal to 1/3 of the billet body. Now you can fix the workpiece of the legs in the clamp, and after, using the end cutter installed on the small turnover of the electric drills, begin the sample of wood until the groove of the required size is formed.

The ruler will measure the grooves obtained and place the spikes on the bruises for the power frame, which after can be formed. Now you can make a control assembly. Measuring tools Allows to check the corners between the elements. Then you need to march the workpiece and disassemble the table. Caricaging glue will help fix the mating elements. After waiting for the frame to dry, it is necessary to strengthen the countertop. Why in the center of the legs need to drill a deaf opening for a furniture pin. Next, it is necessary to place the positions of spikes on the back side of the countertop, drill the response holes.

In this case, it also needs to be pre-fitting, only then the parts can be treated with glue and attached.

Any of these tables can be adjusted for the sizes of a children's or dining room, the main thing, to produce precise measurements and carry out a strong pairing, then the design will serve its owners for a long time.

Furniture stability and safety of furniture products depend on the quality and reliability of furniture legs. An important value has the design of this species furniture fittingswho introduces finishing touch In the completion of the appearance of any product.

In addition, supports are performed by other functions:

increase the mobility of individual items;
Adjustable legs make it possible to give the product the most convenient position;
Decorative fittings complements style solution specific models performed in a specific design style.

Based on the main functional purpose, furniture supports must have defined parameters:

withstand the weight of the designs installed on them and objects located on it;
possess anti-vandal (antifriction, non-abrasive) properties to prevent damage outdoor coating when moving items;
If necessary, have a simple adjustment or transformation mechanism;
Enjoy the appropriate design, harmonizing with the architectural and style solutions of the furniture sample.

Varieties

When the conversation comes on the furniture supports, the legs of a computer or dining table, chairs and beds or small sofa supports, bedside tables or dresser arise in front of a mental eye. Despite the external insignificance, the furniture leg-support plays a fairly important role in the design of the furniture and several functions can be performed simultaneously. Today, the industry produces a wide range of various accessories, among which the supporting elements make a separate category.

Currently, when producing support legs are used various materials, and in connection with constant change in furniture fashion and style, the design of the support elements is constantly being improved. However, the basic requirements for them are strength, reliability and harmony are preserved.

Wheel (roller) supportpreviously used primarily in the production of medical copies, today you can meet any domestic sample. The greatest spread of rolleropores and support elements in the form of small wheels were obtained in various models coffee tables, computer chairs and transformable sofas. They differ:

by type - rigrode or swivel;
on the reference node of the roller - bearing or sleeve;
According to the method of fastening to the furniture design

IN modern furniture, with the exception of large-sized products, mainly the rotary rolleropors are used, which significantly increase its mobility and less damage the floor covering.

Most rolleropor can perceive significant loads and do not make noise when moving items. A heavy sofa bed mounted on rigor rollers freely moves one person inside the room. The mount may be different and depends on the category and destination of the furniture.

For the manufacture of rollers, metal, lined rubber, or plastic (often reinforced) is used. Many modern samples are equipped with a brake (stopper), eliminating spontaneous movement of the product.

Decorative legs Apply not only as supports, but also are a significant design element. Using various materials, shape and color solution This accessure can be fully reformatted by the appearance of a particular item by changing its style. Of course, in addition to clean decorative function These parts should have sufficient strength and rigidity.

This goal is achieved by using defined materials. The classic sample of decorative accessories is carved wooden support racks that are widely used in chairs, sofas and other products, make a classic or imperial style. Basically, for their manufacture, solid wood wood is used, which additional decorativeness gives special surface tinted. Often, decorative legs are manufactured by combined, in which the main, straightforward support is complemented by decorative elements.

On a note!

Furniture made in modern minimalist or modernist styles has metal support racks that have chromium, anodizing or powder coating.

Metal reference racks They are considered the most durable and reliable. If they were previously used in budget and dacual variants Furniture, today they are an integral part of the majority of copies, silent in the power of High Tech. Today, adhesive or cast furniture legs are sufficiently common, which significantly increase the decorativeness of furniture products.

Adjustable

Due to the irregularities of the floor surface, there are sometimes problems with the installation of furniture. In order to new furniture Installing on an unprepared surface Many manufacturers equip their products with adjustable supports. Coma of that supports are necessary for furniture products (tables, tumb, chest), in which the upper surface must be set strictly horizontally. Thanks adjustable legs The furniture can be set not only horizontally, but also give it the necessary slope. Most adjustable reference elements have a screw mechanism. In addition, on some products, the reference groove can be attached to the screw hinged, which allows adjustment without lifting the product.

The advantages of adjustable supports with a screw mechanism should be attributed to the simplicity of adjustment and the low cost of fittings. They are able to perceive significant loads and have a significant range of adjustment. Some inesthetics design screw supports It is usually masked by a decorative case or nameplate.

Choice

Often, furniture supports are buying a hotel to complement the existing furniture. This is usually done when the modification is made with the purpose of:

realizing the possibility of adjusting the height of the furniture;
To increase the mobility of products;
To change the design by replacing ordinary legs on decorative.

When choosing a specific design of the reference element, you should pay attention to the following characteristics:

Ergonomic and practicality of the product providing maximum convenience use;
the ability to perform laid functions;
the ability to perceive the required weight loads;
Decorativeness and style of product.

From the video, you will learn about all the varieties of furniture supports, the features of their fastening and use.