The table is wooden with their own legs legs. How to make a cottage table. Easy in the manufacture of a table for the country area

The coffee table is at first glance, not the most necessary furniture. Therefore, its acquisition is infinitely postponed. But it is precisely such subjects that make the interior of truly cozy and comfortable. Therefore, we share the ideas that prompt how to make a stylish coffee table with your own hands and do not break.

1. Democratic and affordable

For the manufacture of such a table, there will be a pair of metal or plastic boxes and two large boards. Do not forget to securely bore the design.

2. For the smartest

Books with beautiful covers and a small glass for countertops - that's all materials for a similar coffee table. Books must be glued together, and the glass on them can be fixed with the help of silicone glue, which after drying becomes transparent.

3. Ordered chaos

The coffee table from flat elements bonded among themselves in chaotic order is an idea that is easy to implement. Wooden saws are suitable, parts of boards, big books.

4. Industrial style

The coil for industrial cables is a thing that is not found on every corner. But if you still have been lucky enough to become the owner of this subject, you can make an excellent coffee table from it.

5. Table for motorists

The coffee table from the automotive tire will serve for many years. But it is advisable to use the bus without damage. It remains only to paint it, fasten the worktop and legs.

6. Wooden table almost free

Ordinary pallets, which can be purchased for a penny - excellent material for the manufacture of furniture. A little imagination, and a wooden coffee table is ready.

7. Second life of old boxes

Another way to become the owner of a coffee table from a natural tree is to use old drawers as a material for its manufacture. Four large drawers bonded together form a stylish table.

8. Extravagant chic

Especially original, but at the same time luxurious, looks like a coffee table on asymmetric legs. The countertop is made of a thick board or wooden sleeve.

9. Since cottage - in the living room

A large wooden barrel is easily turning into a coffee table. It must be cut into two parts, and then attach to one of them to attach a countertop and legs.

10. A spacious and functional table out of the box

The shopping box of plastic or wood can also be used as a coffee table. In order for the table to be mobile, you can fix small wheels at its bottom.

11. Warm table

Old heating radiator is a reliable basis that will help make a coffee table with their own hands. It will only be necessary to paint it into the desired color, attach the wheels and put the thick glass on top.

12. From the interior door

Interior door, which served his time, becomes material for making a coffee table with your own hands. It must be cut into several parts and make them up with each other.

13. If you quit sorry, and it's hard to carry

Old suitcase can become an original tabletop for the coffee table. It is only necessary to attach legs to it.

14. Brutal elegance

The available version of the making legs for the coffee table is the usual plastic or metal pipes, interconnected by fittings. This furniture will perfectly fit into the interior in the Loft style.

15. From the usual wooden bar

Wooden bar, folded in a checker, will be a tabletop for a homemade coffee table. The legs can be made of thick metal wire.

In order for the interior to look harmonious, it is necessary to take care not only about the details, but also about the finishing of the room. Continuing the topic -

The table with your own hands may well be made even a homemade master who does not have any accumulated experience in the joinery craft. Of course, it will be possible if the design of the table will be sufficiently simple and understandable.

For example, find a suitable ready-made table model for a kitchen with overly small dimensions is not always obtained. Purchase to order furniture from the wood array - sufficiently placed. Therefore, it is sometimes necessary to take care of the tools and design your own "work" yourself, pushing out the specific sizes of the place where the table is planned.

In addition, a desire often arises to show their creative abilities in the conditions of giving, especially since there is always a desire to beautifully equip the veranda or a gazebo of a country site. If there are suitable materials and tools at hand, then you can or sit for drawing up the drawing of the future table, or take advantage of the finished project, and then proceed to work.

To understand which of the types of tables under the power to build with your own hands, it is desirable to consider several options for this subject of furniture.

Tools for work

Before starting work, you must prepare the appropriate tools that will be required for the manufacture of any wooden table. The amount of material for each model will be different.

You can use ordinary, traditional hand tools that have always worked carpenters. This list usually includes:

The plans to be aligned with wood and drive items to the desired size.
The chisels for sampling of various holes and grooves, removing small protrusions.
Saws of different sizes and modifications that cut thick boards or make minor drums.
Pencil, roulette, corner and ruler.
Screwdriver Set.
Clamps for temporary fixation of glued parts.
Sanding paper for grinding.

Many of the tools can be replaced by more modern and convenient devices:

Electric jigscription will perform all the work for which they used to be used, the various saws mentioned above.

Rating electroballs

The grinding machine will help to make the surfaces even and pulses them to the brilliance, will save from the very tedious handling procedure with emery paper.

Milling machine with a set of cutters. This device will help rounding sharp corners, drill curly grooves under furniture loops, and if you need a certain experience, you can decorate the table with a relief pattern with it.

Significantly accelerates work, as it will have to spend on the twist of each self-proof for a few minutes. In addition, it is possible to install one of the cutters or conventional drills in it with certain operations, for example, in order to process the edge or make a perfectly smooth large or fine hole (groove).

The building level will help make the product smooth and neat, as it will show all possible irregularities and skews.

So that the finished furniture does not work out "dashed", the assembly is controlled by the level

Easy in the manufacture of a table for the country area

Make a similar country table - forces to each

Necessary materials

For such a country having a size of a tabletop of 1680 × 850 mm, it will not be necessary for a very large amount of wooden blanks. It is necessary to prepare the following:

Bar, section - 750 × 100 × 50 mm - 4 pcs. (Table legs).
Self-tapping screws, bolts and, possibly, metal corners.
Carpentry glue.
Board, size:

1680 × 100 × 25 mm - 4 pcs. (longitudinal framework elements);
850 × 100 × 25 mm - 2 pcs. (transverse framework parts);
1580 × 100 × 25 mm - 2 pcs. (facing boards for the side elements of the frame);
950 × 100 × 25 mm - 17 pcs. (Boards for the table top).

All wooden elements must be processed by the compositions and have a prepared smooth surface. If it is planned to "darken" wood, then it is covered with a verse, and for the manifestation of the texture pattern - on top neatly passed the grinding machine. Sanding paper with small grain will remove the blurred sublime parts of the wood pattern, and they will become lighter than recess.

Installation of garden table

When all parts for the frame will be prepared, you can go to the assembly.

Frame or "Box"

The first step of the work-table framework details are four longitudinal boards of 1680 × 100 × 25 mm and two end 850 × 100 × 25 mm, laid out on the big table or on the floor. On the end boards there is a markup of the location of the internal and exterior boards. Using a ruler, relying on the drawing, the desired distances are measured and the pencil is marked. Be sure to accurately note the width of the longitudinal board at the junction with the end, especially if the connection is to pass in the insertion method.

The connection of the elements can be carried out in different ways:

Connection with the choice of a "quarter" and using metal corners

- with the help of a steel corner - this is the easiest and most reliable way;

- the method of the insert is a more complex way, since it requires exact dimensions not only in the width and length of the connecting elements, but also in the depth of the board;

Several types of connection on the principle of "Ship-Paz"

- "Paz-Schip" shown in the second figure a), b), c), d) and e) such a compound is also quite difficult for beginner masters who do not have experience;

- The connection of the wizards is shown on Fenther E) - this method also requires ideal accuracy when marking and drumming the holes in the parts connected.

All compounds are usually carried out with glue. An exception is only fastening the details of the metal corner.
The frame must have perfectly verified direct angles, so after connecting all the elements, you need to control the construction of the construction corner and measurement and comparing the length of the diagonals.
If the parts are fixed with glue, they must be fixed in clamps and leave it to the complete burden, otherwise they will be connected unreliable.

When the glue is driving, and the frame will acquire a certain rigidity, facing boards are fixed to external longitudinal sides of a size of 1580 × 100 × 25 mm. The place of their attachments also need to be placed, since in their edges there should be a distance for the installation of the legs. Facing boards are also placed on glue and fixed with self-drawing, the hats of which should be dried in wood by 1.5 ÷ 2.0 mm.

The next step is the transverse case of the countertop boards 950 × 100 × 25 mm. The place of consolidation is also needed to first place, starting from the middle of the frame, as they must be installed at a distance of 5 mm from each other. Table tops over the frame should be 25 mm from all four sides.

Further, each of the boards are fixed in four places to the longitudinal elements of the "box" of the table, and the extreme boards are also to the end parties. So that the hats of the screws were recessed, for them in the boards, the recesses with a diameter of 8 mm are drilled into a depth of 2 ÷ 3 mm, then, in the center of these recesses, the drill of a smaller diameter (usually - 3 mm) through holes are dried, in which the self-tapping screws will be screwed. In order to avoid cracking of boards during installation work, through holes must be drilled.

After that, on the edges of the longitudinal boards, the legs of a bar with a cross section of 750 × 100 × 50 mm are fixed, they must accurately coincide with the width of the table top.

The next step - the legs are installed

The legs can be fixed to the frame by self-drawing, but it is better to fix each of them with two bolts, placing them on the diagonal of the connection site. Through the bolts are drilled through holes, and the twisting of the nuts on them is made from the inside of the frame using the key.
The final stage of manufacturing is seeding with screws of self-tapping screws with a mixture made of joinery or epoxy glue and sawdust. This homemade putty fill the deepening over the hats and well smash. After grazeing the glue all the worktop, and especially the places closed by the "plugs" of the glue, you need to polish well.

After that, the table can be covered with varnish or water-based paint. Waving to dry the decorating or protective layer, the product can be installed in the country gazebo, on the veranda or terrace in the recreation area.

If desired, the set to the table will be easy to make or bench.

Small folding table for kitchen

Such a small folding table is perfect for a small kitchen or a very small room.

Its design is arranged in such a way that the countertop cannot work independently if the feet of the table will be condemned, so the table is quite safe for installation in the children's room.
The presence of a bilateral spacious bedside table will allow you to store various trifles and small toys.
The table is equipped with a tabletop of sufficient size so that the child, sitting behind him, could perform homework.
In addition, there will be a place for a laptop on the worktop or the books necessary for studying books.
If necessary, this small table can easily be replaced with an ironing board, if you have a soft tissue on its surface.

Given all the above, the table can be called multifunctional, despite the very compact dimensions.

Find out how, as well as familiarize yourself with multiple models with detailed instructions, in the special article of our portal.

Required materials and details for folding table

To assemble such a convenient piece of furniture, you need to prepare all the details from which it consists. The list of necessary blanks is shown in the table below, and how to manufacture them - will be described and shown below:

Scheme of the table with the populated numbers of assembly parts (clickable illustration - click to enlarge)

Details number in the drawing	the name of detail	Number, pcs.	Detail size, mm	Material of manufacture, thickness, mm
1	Folding part of the table top.	1	600 × 600.
2	Fixed table top of the couch.	1	600 × 475.	Multilayer Plywood 25mm Thick
3		2	530 × 30.
4		2	120 × 30.	Multilayer plywood 18 mm thick
5	Top face detail of the groove, limiting the movement of the leg.	1	122 × 30.	Multilayer plywood 18 mm thick
6	Element groove for the movement of the leg on the folding countertop.	2	530 × 20.	Multilayer plywood 18 mm thick
7	The element of the groove for the movement of the leg on the tabletop of the couch.	2	120 × 20.	Multilayer plywood 18 mm thick
8	Lower end detail of the groove, limiting the movement of the leg.	1	122 × 20.	Multilayer plywood 18 mm thick
9	Side walls of table stands.	2	720 × 520.	MDF 19 mm
10	Horizontal details of the stands forming the shelves.	3	520 × 312.	MDF 19 mm
11	The lower vertical part of the inner partition of the couch.	1	418 × 312.	MDF 19 mm
12	The upper vertical part of the inner partition of the couch.	1	312 × 184.	MDF 19 mm
13	The average horizontal part of the couch.	1	310 × 250.	MDF 19 mm
14	Door of the couch.	1	477 × 346.	MDF 19 mm
15	Shelf of the couch.	1	310 × 250.	MDF 19 mm
16	Facade cabinet drawer.	1	346 × 209.	MDF 19 mm
17	Front drawer panel (located behind the facade).	1	418 × 312.	MDF 19 mm
18	Side panels drawer.	2	341 × 250.	MDF 19 mm
19	Rear drawer panel.	1	272 × 120.	MDF 19 mm
20	Bottom panel box.	1	341 × 272.	MDF 19 mm
	Handles for drawer and door doors.	2	Ø 30 mm	Wood
	Upper leg element.	1	80 × 80 × 18	Multilayer plywood 18 mm thick
	Mobile feet of the table.	1	Ø Top 55, bottom 30, height 702	Wood
	Furniture loops for connecting two parts of the table top.	2	Ø 50 mm	Metal
	Furniture loops for the door.	2	The size depends on the form.	Metal
	Bottom end panels covering the lumen under the tab.	2	20 × 300 × 5	Plywood 5 mm

The figures show the drawing of the table to which you can rely on the process of manufacturing and assembling elements into a single design.

The main sizes of the table (illustration clickable - click to enlarge)

Separate table nodes - retractable box and guide channel for moving legs (Illustration of clickable - Click to enlarge)

For the manufacture of all the parts listed in the table, modern electrical tools will be required that can bring the workpiece to professional perfection.

Learn how to make with a photo and description in a special article of our portal.

Installation of folding table stands

Start the manufacture of the table stands with the most important and large part of its details - countertops. Since the folding table, this element will consist of two parts - stationary and "mobile", that is, that which can be thrown down if necessary. In the folded state, this table may well perform the role of a conventional compact standby.

Illustration	Brief description of the operation
	The first step of plywood with a thickness of 25 mm, using a jigsaw or circular saw, it is necessary to cut the blanks for the table top, the size of 600 × 600 and 600 × 475 mm.
	Next, the larger panel is marked - the semicircle is drawn up, since the front of the table should be rounded. In order to achieve the correct form of the semicircle, you can use a large building circulation, or make it yourself - from the nail, pencil and rope.
	Then, according to the noted, the tabletop curly. This can be done using a jigsaw or circular saw by installing an appropriate zircle nozzle on it.
	Further, the milling machine is set to the cutter of the desired configuration, which will make the edges of the table top smooth, optionally - smooth or rounded.
	The milling part of the panel is treated with a milling part, leaving a smooth one side that will stick with the second part of the table top. The edges are then processed.
	The next step, the two treated parts of the table top are laid on a flat table at a distance of 5 mm from each other. Marking is made to install furniture loops. They must be placed at a distance of 100-120 mm from the edge of the table top. Furniture loops can have a different form, so they should be put on the marked place and circle with a simple pencil. Then, with the help of a milling mill in the plywood, special curly grooves are arranged, the depth of which should be equal to the thickness of the furniture loops. In the finished holes of the loops are fixed with the help of self-tapping screws.
	After connecting the hinges of two parts of the table, in the middle of the panels, there is a markup from the bottom side to secure parts that form a closed channel for the movement of the moving feet of the table. Guides must be fixed at a distance of 30 mm from the joint of two parts of the table. For the manufacture of parts, plywood is 18 mm thick. Then, cut out of it and processed by a mill of 10 elements: 530 × 30 mm in size - 2 pcs., 530 × 20 mm - 2pcs, 120 × 30 mm - 2 pcs., 120 × 30 × 20 mm - 2pc., 122 × 20 mm -1 pcs. It is important to remember that long rails must have from one edge, and short elements on both sides of the sections of 45˚ so that when docking, they formed a straight angle. In addition, the upper long and short parts fixed on top of the lower rails of the guides are cut from the ends, also at an angle of 45˚. These sections are necessary to ensure that their corners do not interfere with the foot of the legs by the resulting channel. Then, to the discharged section of the rounded, and then to the rectangular part of the tabletop are glued with carbon glue parts. First, they are fixed on the glue, and then screwed up the longest rails having a size of 530 × 20 mm, then overlaps the channel part 122 × 20 mm. On top of long and short fixed rivers are pasted by second, having the same length, but large widths are also additionally screwed by self-draws. Thus, a smooth channel forms between the tabletop and the upper rail, along which the leg will move. It is very important to calculate the location of spouts of screws in so that the upper does not come across those that fix the lower rails. Similarly, four parts and on the rectangular part of the table top are fixed. All items should be processed before smoothness and perfectly fixed with each other, otherwise the leg when moving will be stumbled on obstacles and jam.
	The leg is usually made on the lathe. If it is not, then it can be ordered to order it at the master or buy in the finished form. As a last resort, you can make it square, processing the timing of the desired height before smoothness. Then, on the upper end part of the leg with the help of a duct and glue is fixed exactly in the center, the guide square plate of plywood, having dimensions of 80 × 80 × 18 mm.
	Next, after drying the glue, the leg can be installed in the channel intended for it and test for its free movement, without jamming. If necessary, you can carry out minor fit and refinement.
	The finished countertop is painted, or is covered with a water-based varnish - if the goal is set to preserve the factory drawing of plywood. After that, the finished countertop is laying aside and go to the manufacture of the couch.
	Elements of the cabinets do not have complex configurations, so it is enough to make them enough on the MDF panel or a thick phaneer to accurately move the dimensions of the parts specified in the table, and gently cut them out them with a jigsaw or saws. After the items are made, their end parts must be processed before smoothness by the milling mill, otherwise they will look inactively.
	If you plan to leave the visible end parts of the details of the chandeliers with a special laminated edge ribbon, then this process is carried out using a conventional iron. The tape on the inner side has a layer of glue, which is heated under the influence of heat and ensures reliable fixation of the edge on the surface of the end parts of the MDF panels.
	The next step in the door panel of the cabinets you need to make curly grooves in which furniture loops will be fixed and fixed. The holes are made in the same way as in the tabletop using a millingrer, but in this case the mill can be installed in the screwdriver, since the MDF has a smaller density than glued plywood and is easier to process without material chip. The loop should be located at a distance of 100 mm from the edges of the door - before the start of drilling you need to spend thorough markup. A similar procedure is carried out with the wall of the couch to which the door will be fixed. Then the door of the door is joined among themselves, to check the correctness of the installation and for the holes for the screws for the screws.
	In addition to loops, you can immediately fasten the prepared handle. To do this, retreating the edge of the panel 50 mm and finding a convenient position in height, the point is noted through which the through hole is drilled to fix the handle.
	All made parts of the cabinet are painted paint selected color with roller and brush. The paint will not only make the product aesthetically attractive, but also protects the material from the negative effect of a specific kitchen wet environment.
	Next, you can go to the assembly of the bedside tables. Professionals spend this process using special tools, but they can be completely replaced by appliant devices. For example, you can assemble on a flat table, and for the convenience of installing the cabinets, it is additionally installed on smooth bars. Mutual fastening of parts can be carried out with the help of wooden drums, metal furniture corners or screws - the last option is the easiest, but also the most unreliable. In addition, hats of self-assembly after assembly will have to mask various compositions. The assembly process occurs as follows: - The bottom panel is laid on the stand. - It is set to it in terms of the level and with the help of a construction corner one of the side panels and its location is marked with a pencil. - And the same is planned on the horizontal and vertical panel the location of the fastening parts. - exactly the same procedure is carried out with the second side and separation middle wall. - Then, on the marked points of the bottom and end sides of the side panels, holes are drilled to install the waders. - After that, before gluing the parts, the locations are defined on the side walls to install the shelves. Then, in the marked places mounted brackets-shelters for which holes are also drilled. - Next, in the holes, drilled in the bottom, are mounted glued by glue, the side walls are put on the upper, protruding part. - the non-removable jumper shelves are mounted in the same way, simultaneously with the side walls.
	Before you continue to work, you need to make sure that the glue in the collected design is good. In order for the cabinet to stood tougher, it is placed on the side and for the breakdown squeezed by clamps.
	While driving glue, you can take a drawer assembly. Since it will be completely assembled from MDF, the installation of the box can also be carried out with the help of a wanking. The lateral sides are assigned to the bottom part of the box, and the line has a pencil, and then marked seats where the sewage will be installed. Then, the sidewalls are removed, and on the marked places, the holes are drilled in their end to install fasteners. The same is done on the bottom panel. Further, the wrenches are missing with glue and gently inserted into the holes, connecting the sidewalls with the bottom.
	Bathrooms are twisted with the help of self-tapping screws, the hats of which are recommended to be dried into wood, and the holes should be sealing from epoxy glue and sawdust. Another fastening option can become furniture corners, which are from the inside are screwed to the sidewalls by self-draws. Each of the sides will take two corners.
	Collecting the box, it is necessary to control the evenness of its corners with a construction corner and a change in diagonals, otherwise there may be a skew.
	If it is planned to install metal roller guides for a lightweight drawer, then to start on the sidewalls of the boxes and on the inner walls of the cabinet, the place of their attachment is determined. To do this, with the help of a pencil and ruler, the line is drawn, on which the guides will be enshrined.
	Next, the front panel is installed to the front of the box. It is screwed from the inside of the drawer, through pre-placed and drilled holes. Recommended In addition to the screws for fastening the panel, use the glue: it is applied to the front panel, and then the facade is pressed to it, and they are tightened with four-five screws. After grazing the glue in the center of the front panel, the hole is drilled through which the handle is screwed.
	Finally, the long-awaited moment comes - the connection of the stands and countertops. The stationary part of the countertop is recommended to first be glued to the surface of the couch, and then fasten it with self-strokes, which are screwed from the inside of the lower cabinets. But first, the countertop must be right. A part of the channel located on the stationaryly installed tabletop panel must be restarted into the side of the couch - it will serve as a stopper for the movement of the legs towards the table. The countertop should go beyond the edges of the cutter on the side of the drawer by 50 mm, open shelves by 30 mm, and from the side of the leg - 120 mm.
	Securing the tabletop, go to the final installation and screwing on the dormitory of the bedside tables. Then the retractable box is inserted, and the shelves are installed on the shelves.
	In the closed state, the compact table, so it does not take up much space and looks quite aesthetic. If you wish to decorate it, you can choose other colors that will be better harmony with the interior of a particular room.
	In the open state, the table will also not take much space and perfectly fit into one of the corners of the room. Thanks to its "easy" design, it does not waste the interior, and the shape of the tabletop makes it safe for children. Therefore, this option can be considered ideal for small apartments with small kitchens and rooms.

If there is a need to save money, or simply there is a big desire to show yourself in joiner's work, then you should not postpone self-making. Moreover, the assembly will become not only interesting and useful, but also very pleasant, especially at the moment when the work will be successfully completed.

For those who are confident in their abilities, another interesting version of the round table, which may well serve both at home and in the territory of the site.

Video: An example of a round table assembly

And one more idea of \u200b\u200bthe kitchen table, to realize themselves, which is incorrect, will also be able to skillful owner:

Video: Easy kitchen collapsible design

In the ash of a beautiful wood. It was from him that I decided to make myself a desk. Start decided from the manufacture of legs.
Unfortunately, I do not have a lathe. In such a situation, you can make legs to order on a CNC milling machine. The guys make truly beautiful and complex things. But firstly, it is expensive, and secondly is not interesting.
You can just just make straight legs yourself.
But I still decided to make legs with some decor.
So, that's what we have at the beginning: unedged ash board-fifty.

Reducing the board we get here such curved and coarse blanks

First of all, they need to calibrate. Standard procedure. At the beginning of Fugansk, we derive two plates perpendicular to each other.

And after that, the reysmaus is equal to the blanks in thickness and customize the size.

Yeah, Catan is not pine. Beautiful drawing, noble color, pleasant severity.

It would seem that it could be easier. Passed the workpiece on the template and process it with a cutter with a bearing. But like shopping with instruments in search of a suitable straight cutter with the upper bearing could not find such with a working height of more than 38 mm. But the cutters with the lower bearing can have a working height of 76.2 mm! I had to buy a mill with a lower bearing.
To work with such a cutter, the template had to modify a little. The lower part of the template made 10 mm plywood to reduce the departure of the cutter. The side wall made the plywood stroke - 27 mm so that the template is safer than the corners. Well, it brought all the elements by the confirmates.
The whole idea in one photo:

One side of the frame is closed. When the workpiece is installed in the frame, it rests on this partition for more accurate positioning. Next, the workpiece is fixed with clamps on both sides. During operation, you can direct the frame holding for these clamps.

Trial launch showed that the cutter can leave the chips on decorative elements rumped over the main material. That this does not occur in places of decorative crests installed bars.

The result of processing one side of the leg is visible in the following photo.

Turn the workpiece in the frame for 90 degrees, fix, process. As a result, we get a pretty pretty result.

Of course, this method cannot fully replace the lathe, but some freedom of creativity also provides. It remains only to spill the resulting cube at the end of the leg. I like the result.

The table is the necessary attribute of kitchen furniture. To date, manufacturers for the production of tables apply a lot of materials. Great variety of shapes for tables for the table, they are more than twenty. In the traditional version there are four legs. In most cases, standard models have a square table top or rectangular.

Wooden dining table of rectangular shape with four legs

Table with three legs is usually round. It can be used as a small coffee table or as a dining area.

Round wooden table table with three legs

There are tables and with two legs, they can be different, but are mainly common models having two x-shaped legs or durable made of array.

Wooden table with X-shaped legs complete with seats for the country area

The legs of the table are attached to the kings of the support frame, and they, in turn, fasten the worktop

Many masters know that the incorrectly attached legs are the root cause that the table will swing and stand under the tilt. There are regulatory supports that can correct the large percentage of inclination, but still a high-quality assembly has paramount importance.

There are several options for fastening legs to table tops:

Attaching the leg with surface plates

Attaching legs with T-shaped nuts

Fastening the table tops to the tsargs of the table without using additional accessories with screws

The use of small metal Z-brackets - another popular method of attaching table top

Fixing with surface plates	Suppose you bought legs without appropriate fittings. To install them, you will need bolts with ear and eyeles for larger tables and braided the threaded for small.
Fixing on T-shaped nuts	This mounting option is suitable if you intend to restore the facial plane of the table and thus give the interior updated look. You have in stock should be T-shaped nuts, bolts with ear and eyeles.
Fastening on screws	This is an ordinary and tested way to attach the surface of the table to the kings without the use of auxiliary fittings. Suitable for furniture classic option.
Application of z-shaped holders	The use of small iron z-fasteners is another, which is popular for the fixation method. The main advantages of this method are low cost, simple and reliable installation.
Application of wooden clamps	Easy and durable method of attaching table tops without using purchasing fittings. They are similar to Z-shaped holders. They are made from any trimming, it suffices to observe the orientation of the fibers.
Use eight holders	These metal fasteners are widely used when attaching countertops. They are two species - with washers of the same and different magnitude.
Applying spacers with grooves	In this case, 2 or 3 auxiliary struts with grooves of a rectangular shape are attached to the kings of the kit with the grooves of a rectangular shape, the length of which is 10-15 mm.

The use of homemade wooden clamps is a simple and reliable method of fastening countertops to a podstol without purchasing fittings

Steel fasteners-eight - option using inexpensive fittings

In this case, the headset is fixed with two or three additional spacers with rectangular grooves with a length of 10-15 mm.

Necessary materials

Materials that are used for the manufacture of tables, most different, tell about some of them.

Suitable for this array of different wood species, such as coniferous, oak, etc. If you are a novice master, it is better to apply pine, as it is easy to process. It should be remembered that such furniture burns out, absorbs odors, liquid, poorly tolerate temperature change. Of the advantages - the material is environmentally friendly, strong, looks exquisite.
Massive pine for the manufacture of table with their own hands
Chipboard is rather popular for the production of furniture material. In the manufacture, dry chips and resins are used. From flaws, environmental risks can be noted. Advantage - relatively cheap price.
Chipboard - inexpensive version of the material for making a dining table
MDF - compared to chipboard more eco-friendly, but also more expensive. In the manufacture, use wood chips, carbide resins, modified melamine. The disadvantage - freely lights up, the risk of fire is possible even from rapidly heating items.
MDF is suitable for the manufacture of a table, it is better and eco-friendly
Furniture shield - the complete opposite of MDF and chipboard. Acceptable price equivalent, material durable and environmentally friendly. Made from glued bars, pulled by the press.
Furniture shield - square or rectangular sheets of wood, which are manufactured by the method of gluing with each other wooden stations in width or length
Metal - In most cases, a stainless steel is used. It will be expensive to cost such a thing, but this table will attract attention.
Stainless steel products are unpretentious in care, durable, practical, universal in use

These materials are suitable for both countertops and legs. They also make the legs plastic, chrome, wrought-iron. When choosing, rely on your preferences.

Support furniture chrome plated for tables with side mount

Coffee table with wrought-iron legs

White Round Plastic Table for Street

Required tools

Required set of tools for making and assembling table

For the manufacture, such tools are needed: plain grinding, machine for grinding, electrolovka, saw, drill, drills, sandpaper, screwdriver, self-tapping screws, gloves, wrenches, clamps, roulette, pencil, protective equipment - glasses, gloves.

Production Process: Step-by-step instruction

Drawing of a wooden table with four legs

First, it is necessary to make a drawing. Decide which legs you will be attached to - purchased or manufacture yourself. The form can be any.

Figure bales or legs for homemade table

If the table top is a width of 0.8 m, then the legs should be a length of 1.2 m. In order for the countertop to be smooth, treat it with a grinding machine. Between the joints should not be gaps. So that the countertop is not deformed from high humidity, the boards must be put on the counter texture.

Boards for tabletops with a thickness of at least 30cm

At the ends of the connectable boards, it is necessary to drill holes with a depth of 8 cm, the gap between which is kept in the range of 10-15 cm. Prepared places We pass by the sandpaper and lubricate the edges and holes. Insert the seasons into the holes, so connect the worktop. Excess glue remove.

Options for fastening legs to a wooden table

With the help of glue and screws, we connect transverse and equity boards with legs. On top of the latter, we do two recesses to attach the worktop. We are waiting for twelve hours and mount it. The design is covered with varnish, verse or paint.

Table with attached table top, frame and legs

Important! Applying the veil, consider the following: Competently choose the diluent, the plane before the coating must be carefully processed by the sandpaper, the main thing is to properly regulate the gun (the form of the torch should be oval, and the layer that you apply should be overlapped by half).

Cover lacquer or wax to protect the top layer

After reading the options for fastening the legs to the tabletop, you will not be difficult to make the table with your own hands, thereby updating the interior of such an original thing.

Video: Massive tabletop. My fastening option

The table is a mandatory piece of furniture in the kitchen. Today, manufacturers for the manufacture of tables use a huge amount of materials. Options for the kitchen table, you can also count at least two tens.

photos

How much should it be?

In the classic version, the kitchen table has four legs. Basically, these are traditional models with square and rectangular countertops. The table on three legs almost always has a round shape. It can be a small coffee table or a full dining option. The table on two legs for the kitchen can be made in several species, but most often there are models with two x-shaped legs or resistant legs from the wood array.

Materials

Chrome metal

Metal legs are one of the most common types of support for kitchen tables. The exceptional strength of the material ensures their reliability. Such legs are considered resistant not only due to a thorough design, but also due to the plugs that are installed to protect against glide on the floor. Manufacturers and craftsmen who have decided to make the table with their own hands, the metal legs attract attention to low valuable and durability. The coating of such supports may be different, they can be painted or chrome.

Worn metal

Tables with wrought-iron feet have a number of benefits. First, they are very durable and never need to be repaired. Secondly, the model with iron legs has maximum stability, it is almost impossible to tilt or turn it over. Thirdly, tables with forged legs are quite universal, easily fit into any interior and do not conflict with interior items that have no wrought elements. Fourth, forged legs are quite simple in care and there are no special recommendations for their content.

Wooden

Tables made of natural wood - this is a classic and the oldest tradition of our country. Such furniture always looks very beautiful and expensive. Wooden feet for kitchen table can be of various shapes: round, square or carved. Models with carved or accurate legs are the most beautiful and elegant, and often the overall impression of furniture depends on the mastery of craftsmen. The tree is covered with varnish and grind, the layers do as much as necessary to obtain a beautiful smooth surface.

Plastic

Plastic legs are in great demand due to their low cost. In addition, the furniture legs made of polyurethane qualitative and reliable, conquering beautiful carvings. Feet from this material are perfectly combined with all table tops, regardless of the material from which they are produced. Polymer materials are absolutely not susceptible to moisture and evaporation. Another advantage of the legs from polyurethane is their hardship, which makes it possible to prevent the rapid spread of fire in the room in case of fire.

Designer finds

The most common option of the legs to the trendy tables for the kitchen is chrome-plated supports, ideally harmonizing with retro style, minimalism and high-tech. If you search the latest design tables and supports to them, you can find quite unusual execution. For example, supports can be too wide or, on the contrary, it is extremely too long. Often, the form of supports in the fantasy designer suddenly becomes curved or decorated with art decoration.

Special attention to the legs are attached if they are under a transparent countertop. In this case, all the magnificence of beautiful legs is excellent visually visually, so a creative approach to their execution is required. As a support, an a curved at an angle of 90 degrees a metal box with a cross-section, which plays the role of a central support. Luxury design is obtained using four elegantly curved legs, similar to insect paws.

Special luxury attached to the tables openwork metal legs. They can fill almost the entire space under it or part of it, be in the form of a geometric shape or depicting the leaves of the plant.

Extravagant models, successfully inscribed in the modern interior, you can call kitchen tables with X-shaped legs made of a square with a square cross section. The most harmonious looks at the end of the corner and converging between themselves in the middle.

Pledge of strength and stability

It is known to specialists that unprofessionally installed legs are the cause of shaking and tilt of the table. And although adjustable supports can correct the slope, but 99% of the table quality depends on the correct assembly.

Two popular methods of fastening legs can be distinguished: installation of surface plates and installation using T-shaped nuts.

Installation of surface plates

If you purchased legs without fittings installed in them, you will have to do it yourself. To do this, you must have bolts with an eye and eyeles for large tables and threaded brazening for small tables.
The bolts with an eye and eye need to verify on the check plate and make sure that the screws will be provided with a compatible size.
Install the bolts with an eye and an eye into the table of the table, and the center of the legs mark the marker or pencil. Then it is necessary to make a hole in the leg and strongly spin the bolt into the upper part of each leg.
Turn the table top with the invalion side or put on the side.
Plates set in all four corners of the table top with four screws.
Then you need to fasten the top of the bolt with the eye and eye in the plate. Carry out to complete tightening.
After installing all four legs, put the table to the floor and make sure that it stands exactly.

photos

Installation using T-shaped nuts

This method can be used if in the future you are going to decorated the facial surface of the table and use it to update the interior in the kitchen.

You will need T-shaped nuts, bolts with ear and eyeles.
At the same distance you need to drill four holes in the tabletop.
Make sure the holes correspond to the size of the T-shaped nut.
Next, we insert the nut with the help of a hammer into the hole above down the worktop.
Install the four bolts with the eye and the eye, which will correspond to the size of the T-shaped nut in the table of the table. Measure and mark the exact center at the top of the leg. Drill the drill hole and screw the bolt with the eye and eye into the leg.
Twist the leg in the middle of the base until they connect to the upper part.