Table from the board 50 do it yourself. Original and functionally: how to make a table of wood with your own hands. Table with x-shaped legs

In the context of modern small-sized apartments, it is rather difficult to give the will of fantasy and acquire furniture items that would be arranged in everything. Among other things, it is enough to find such elements of the interior that would be attractive not only on design, but also by price. It is possible to solve these two tasks with the method of independent manufacture of wooden furniture. This may be, for example, the table. You can perform it by preparing all the necessary materials and tools. Use this subject of the interior can be both in the kitchen and in the living room.

Preparatory work

In order to make a wooden table with your own hands, you will need to prepare some materials. It will take a furniture shield whose thickness is 19 millimeters. This material is characterized by high strength and looks very attractive. Shields at the preparatory stage will need to be placed, and after - to cut off the blanks. Important stock and necessary for assembling fasteners. Thus, it will be necessary to prepare 6 boards that will make up the lower support. Their size - 19 x 100 x 965 millimeters. The legs will be 4, their dimensions - 19 x 215 x 680 mm. The legs are useful in the same amount, however, the dimensions of these elements must be equal to 1938 x 470 mm. Table-top supports will be a blank with dimensions of 19 x 125 x 610 mm. Wooden table for a gazebo can be made according to the same sizes. The master must prepare two shots for the legs with a 10 x 32 mm dimensions. Two jumpers with dimensions of 19 x 140 x 1100 mm should be separated.

Additional elements

It will take a steel screed in the amount of two pieces, its size should be 150 mm. The countertop will be limited to the following size - 19 x 1020 x 1900 mm. Planck countertops should be carved in the amount of two pieces and have dimensions of 19 x 19 x 1750 mm. Screws, washers, screeds, as well as sewages have to be used as fasteners.

Preparation of instruments

Wooden table with your own hands it will be impossible to make, if you do not stock up with an electric jigsaw, a disk saw, hacksaw, a drill with drills, a plane, milling machine, a file, clamps, brush. For fastening the parts you need carpentry glue, it is possible to process the wood that will be sandpaper. The table will well look like, if you treat it with a polyurethane varnish, which can be glossy or matte.

Manufacturing technology

If you decide to make a wooden table with your own hands, then you need to know that each supporting structure has 3 glued blanks among themselves. In the central part should be formed by the opening. Immediately you need to cut 6 elements for two supports. Next, the master must make direct drive using a disk saw for this. Corners must be rounded. In two billets, it is necessary to cut the central part so that the groove occurs on the central part of the support. The width of the groove should be slightly less compared to the thickening of the spike in the leg. This will eliminate the separation of the design during swelling and drying.

At the next stage, you can glue supports. After applying to the surface of the adhesive parts, they need to be folded so that the upper edges are cutting into the flush. The reliability of the attachment will provide clamps. After the supports are succumbed, it is necessary to get rid of excess glue. After clamps are removed, you need to exit the lower and upper edges.

Work on legs

When the wooden table is manufactured with their own hands, you need to prepare four legs. After vertical edges, it is necessary to shoot and round them with a milling machine. At the ends of long blanks, it is necessary to place, and then cut the spikes by placing them from below and from above. You can do this with a disk saw that must be provided with a combined disk. After the moldings will be taken and brought to the necessary dimensions, you can round all 4 ribs. On the reverse surface of moldings, it is necessary to make grooves for glue.

Work on supports

If you decide to make a wooden table with your own hands, the photo of the design will help you solve what features this piece of furniture will be posted.

The next step will be cutting blanks for supports. For gluing, you should choose a 10 mm groove in each workpiece. It is preferable to produce data to manipulate immediately. In order to simplify the task, you must prepare a cardboard pattern by placing the location of the grooves. Next, you can make pairs of gluing in such a way that the propyl is located in the central part. Everything needs to be filled with clamps. As soon as the glue is dry, you need to clean the sleeve using the emery skirt.

Installation of legs

If a wooden table is made with their own hands, the photo must first be considered. It is important to initially adjust all the connections without the use of glue. With wide edges, the compound should be dense. It is necessary to provide a gap of 1.5 millimeters to compensate for the change in the size of the wood. When edging, these items will be decorated.

Walls and spikes must be treated with glue, after it can be started to pair the legs with vertical supports. Without waiting for glue, it is driving, it is necessary to do holes and enhance the pairing with the help of a wanking. If you decide that the wooden table will be manufactured with your own hands, the drawings are recommended to prepare at the initial stage. For the legs, cut off the moldings of the required length. They need to be glued and torn using clamps. The glue is applied, and after it is left until drying.

If you decide to make a wooden table with your own hands, the drawings can be borrowed from the article. The jumper should be installed high, so that the sitting at the table did not hurt her legs. It is necessary to make gluing using two slats, which will be pre-edged with molding.

After the glue dries, you need to remove clamps, and then remove the champ. On short sides, holes should be done to install fasteners. The countertop can be performed independently, its sizes may differ from those that presented above. On the ends you need to select spikes using the jigsaw.

Next, the spikes are cleaned with a file. Along the long edges of the workpiece, it is necessary to set the planks that are attracted by clamps and dry. Using the edge cutter, you need to level the edges of moldings. They should be fixed to the straps, and after it is enough and clean the joints using a grinding machine.

When a wooden table is manufactured for giving with their own hands, the drawings will make it possible to understand how the compounds of the countertops and legs are made. To do this, use P-shaped brackets. On the long sides of the base, choose a quarter to fix the sidewall. The ends of the last elements need to round and clean it. After everything gluits and shrinks with clamps, and then left until drying.

Final work

Before making a wooden table with your own hands, you need to get acquainted with the technology of work. At the next stage, with a retreat from the edges of the base of 100 millimeters, it is necessary to do holes, the diameter of which should be equal to 20 millimeters. Between them should be located through grooves. The holes are required in order for the base to be split. If you are making a wooden table for giving with your own hands, drawings should help in carrying out work.

Now the wizard can build the table, for this you need to fix the jumper to the legs. Using a pencil, it is necessary to note the position of the legs in such a way that they are perpendicular to the end of the lid. Marking should install brackets. In the table top you need to do 10 holes for installing screws. Next, you can strengthen the brackets. Under each screw, it is necessary to put a puck, it will allow you to compensate for the shrinkage, it will only work out to make a folding wooden table with your own hands.

You can change the technology and size of the table at your own discretion. However, it is necessary to remember that the design should be as strong as possible and reliable. It is important to protect the wooden elements from the negative impact of the external environment, especially the objects of furniture that are supposed to be operated in the kitchen or outdoors.

Who said that the table is a simple subject of the interior? In fact, the creation of a table is a fascinating occupation, especially their own hands from a natural tree. Today in the review of our editorial office we will tell you how to make a table of wood, what knowledge you need to have the design to serve for many years without complaints.

Ideas for manufacture with your hands Table table: photo, recommendations, drawings and step-by-step instructions

Before working, it is important to determine the following moments:

1. Sizes and operating conditions. From this will depend on the functionality and additional activities that will need to be taken.
2. Find (draw) plan scheme.
3. Selection of material and accessories.

For a novice wizard, choose better sketches easier. Here are some sketches that you can come in handy.

Article on the topic:

Photo examples, drawings, schemes, materials; Features of manufacturing furniture for the garden, children's, bath, gazebos, tips and recommendations of masters - read in our publication.

Wooden table for cottages and houses: material selection

It is best to use a natural tree. Even old boards will be suitable for an experienced wizard. Several movements of the plane and here - the raw materials are ready for work. Prepared wood need to dry.

Tools needed to create a wooden table with your own hands

For the manufacture, for example, you will need a minimum set of hand tools: hacksaw, hammer, stub, screwdriver, nails, screws, roulette or ruler, kitchen and pencil.

Article on the topic:

: what it is, advantages and disadvantages; Step-by-step making coffee table, armchairs, sofas, shops, rack; Features of the decor with photos - read the publication.

Table of wood with your own hands: drawings, photos and step-by-step instructions

For work you can use both whole boards and. Spend a revision of old furniture, it is possible that you will find materials that can be used.

Making a round wooden table

Let's consider the process of making a simple round table from the cottage boards. We will need conventional boards and rails to secure the design.

Important! Before starting work, the board must be treated with a planer and emery paper.

Illustration	Description of action
	Processed boards lay out in the sequence in which we will shoot down the table. In our case, they have grooves and connect them along the spike-groove system.
	Connect the boards with the help and squeeze the clamps. After 24 hours, the clamps can be removed.
	With the help of bars, we increase the tabletop. Further, on the obtained shield, find the center and, with the help of a circulation or auxiliary means (nail, twine and pencil), outline the circle with a diameter of 1000 mm.
	Next, with help, cut out the circle in the outlined circuit.
	Grind the working surface.
	We will make legs from bars with a size of 4 × 4 cm. Processing them with grinding.
	Foots fix on corners.
	Here is such a simple table for the cottage we turned out.

Article on the topic:

: photos of the stages of work, the advantages and disadvantages of these beds, their types, as well as a step-by-step master class on the manufacture of such structures, how to properly choose the mattress for beds from the pallets - in our publication.

How to make a wooden kitchen table

A very simple and stylish table can be obtained by spending literally one evening in.

By the way, this model is very popular if you want to be the same in the kitchen, you can make it with your own hands.

And here is another option to manufacture a simple kitchen table with your own hands -

Photo gallery of various options for wooden tables made with your own hands

For example, we propose to study several versions of wood tables for different premises in our photo gallery.

1 of 8.

Furniture made of solid wood highly appreciated at all times. Now she can rightly be considered a luxury item. However, everyone who has elementary carpentry skills and sufficient desire can maketable from the array with minimal investments.

Furniture should be durable, reliable, beautiful, fit your functional purpose.

Of course, it is much easier to buy a finished product and faster, but its independent production has several advantages:

1. Price. The cost of the table from the natural tree is high enough.
   

   

   However, in the manufacture of at home, it will decrease at times.

2. Quality. Selecting wood on their own, the risk of using low sample materials is reduced.
   

   

   You can choose exactly the breed that will meet all the necessary technical and aesthetic requirements.

3. Durability directly related to the quality assembly quality. Creating furniture for yourself, even a novice carpenter, will collect the design neatly and reliably.

   

   Pre-processing of all boards with special protective equipment guarantees a long service life.

4. Design . Despite the huge selection in stores, there are often situations when they like everything, but some small item would like to change.

   

   Making the table yourself, you can take into account all the nuances and create an ideal model for yourself.

5. And of course, there is nothing more pleasant than admire and use your creation every day.
   

   

   This is a great opportunity not only to save, but also make a part of your soul into the house.

Choose model table

Before proceeding with the selection of material and directly creating the furniture item, it is necessary to determine its design. The model directly depends on the functional purpose and features of the room.

For example, if the room is small, it is better to choose compact items.



In this case, a neat round table is suitable for 1 leg.

For a spacious dining room, the living room is the perfect option - a classic rectangular table.



It can also be an oval roomy table with a massive podstol.

If there is a need for a product with a large capacity, but the room does not assume the presence of large-sized items, it is worth thinking about the sliding or folding structure.



If necessary, the countertop is extended.

For novice craftsmen, it is easier to make a piece of square or rectangular furniture on the 4 legs of medium sizes.



This table is manufactured without additional mechanisms.

What breed of wood is better?

Each type of wood has its own characteristics that should be taken into account when designing furniture.



People have long been the tree considered as the main building material.

For a more convenient and detailed comparison, the characteristics refer to the table.

Table 1. The most common types of wood used in the furniture industry

Name	Average density kg / m3	Twelling strength	Characteristics
Oak	700	9,9	Very durable breed, resistant to rotting processes. Differs on a beautiful, noble texture.
Beech	670	12,1	Representative of solid rocks, easy to process, supple. However, prone to loading, which requires careful antiseptic processing. Drying is deformed more than oak.
Larch	660	9,8	Durable, resistant to rotting and deformation, has a tendency to cracking. Therefore, it is not recommended for premises in which changes in humidity and temperature are constantly observed.
Birch	630	9,0	Quite durable, resistant to deformations, chips and cracking, however, with constant humidity, it has a tendency to rot. This deficiency is easily neutralized by antiseptic processing, as the tree is easily soaked with special compositions.
Pine	500	7,4	Durable, soft, easy, deformed to a small degree. Because of its natural characteristics of the fuel when working. It is easily soaked with antiseptic compositions.
Spruce	450	6,8	Less smooth texture in comparison with pine, has a greater number of bitch. Not so well treated with an antiseptic, more capricious in processing.
Aspen	380	6,5	The texture does not have a special expressiveness, the color is whiteish green. Due to its softness, it is not crackdown, it is easily processed, it is little susceptible to rotting. However, on the surfaces from this material there may be traces from mechanical impacts (for example, if the child will draw with a strong pressure on the handle or pencil)
Fir	370	5,9	Soft breed, poorly tolerate moisture is subject to rotting processes, so it is not suitable for furniture, which will be used on the street or in rooms with high humidity. It is easily processed, which will simplify the work of novice carpentry masters.

So, carefully examining the table, it becomes clear that soft wood rocks (aspen, fir) will be simple in operation, but during the service can disappoint due to its exposure to mechanical effects and low moisture resistance. It is better to stop your choice on more solid varieties, such as pine, larch, beech and oak.



Heavy-duty wood breeds (HRB, TIS, etc.) We have not considered, since their processing is extremely difficult at home.

Necessary materials

For the manufacture of the table, the following materials will be required.

• Bar 40 mm x 40 mm for fastening the support part to the tabletop and giving the structure of strength and stability.
• Bar 70 mm x 70mm for the manufacture of legs. If the design provides classic carved bales, and the experience of wood processing does not allow them to make them independently, you can always choose the appropriate option in the furniture accessory store and purchase ready-made items of the product.
• Boob and for the table top (thickness of at least 40 mm).
• Glue for wood.
• Furniture waders and confirmants.
• Antiseptic.
• Varnish or azure for wood processing.

The number of boards depends on their width and alleged table size.

Tools for work

All the tools you need can be divided into 3 groups.

1. Measuring tools:

• Metal line 50-100 cm;
• Roulette;
• Metal Cornel;
• Manual level 50-80 cm.

Tools for creating furniture with your own hands.

1. Tools for working with wooden surfaces:

• Saw / hacksaw;
• Jointer;
• Grinding machine, sandpaper.

Required tool kit.

1. Tools for assembling Product:

• Wedge or screw clamps;
• Kiyanka (suitable as a wooden and a rubber brisk)
• Screwdrivers with different edges;
• Drill, screwdriver.

We make a table of wood with your own hands: Step-by-step instructions

Table top

Carefully treat everythingboards.

Having achieved a perfectly smooth and smooth surface, drill in each end of the hole under the waders in a step of 10-12 cm (for extreme boards they should be made only on the one hand).

All edges should be corded, and sanding the surface.

After careful cleaning from chips and dust, they need to be labeled with special joinery glue (the use of PVA).

The boards are then bonded with each other using wooden wrenches placed in harvested holes.

Important! When gluing the drawing in different directions. So the strength of the product increases, the risk of its deformation is reduced.

When the cloth from the board is collected, it is necessary to dry it, consolidating with the clips.

After complete drying, cut the excess glue with a construction knife and treat the surface with a grinding machine.Ready shield treat special antiseptic.

Thus, on the manufacture of a canvas from a tree requires one day of work.

Podstole

Consider the process of creating a standard podstol (4 legs and a rectangular frame).

Screw the necessary bars for all items necessary, treat them with a grinding machine or manually emery paper and cover the antiseptic.

To save time, it is better to produce a procedure in parallel with the worktop.

When the prepared elements are ready, secure a pair of legs with less transverse bars with furniture screws.

Previously, they can be lubricated with glue.

Important! Self-tapping screws are screwed from the inside at an acute angle to the surface.

In the same way, cross the legs with long bars.

In the center of each leg, drill holes for further assembly of furniture.

If you plan to dotable two-color, painting of prepared elements should be carried out before the final assembly. If the product is one color, collect the design and color it entirely.

Final installation of the product

Place the countertop on the smooth clean surface face down and start working:

Apply from above the prestole as it should be attached and outline with a pencil on the inside.

Mark the locations of parts connections in increments of 200 - 230 mm on both surfaces.

Drill the holes in the substole and the tabletop, remove the chips on them, wake the glue and collect the product with special furniture mounts (as in the manufacture of a wooden canvase). If necessary, use the Cyans.

Leave the product to dry on the day (at least 12 hours).

The final stage

When the design is assembled, make a final grinding, apply decorative elements in accordance with the design project and cover several layers of varnish or lazories.

Adhering to the instructions, you can easily make a table of wood with your own hands.

Important! Each coating layer must dry completely. Therefore, the final finish of the table will take at least 1 day. Therefore, the process of creating your own masterpiece from the massif will take you about 3-4 days.

Spending the minimum amount of cash and several days, you will get reliable and durable diningtable of boards and oak, pine or other material you like, and a lot of positive emotions.

So you learned how to make a hand-made table from the wood array.

Video: Dining table made of wood array with their own hands.

To start a loved to the independent manufacture of furniture, it is worth learning how to create a stool because it is the easiest way. And then the time to study the question of creating a table comes.

Table designs are different, however, the simple version is very similar to the process of creating a stuff.

A simple table for use in the country or during a departure to a picnic you can collect just a few hours. To do this, you need a hacksaw, a hammer or drill.

However, a table based on a similar approach can be made for residential premises. Since it is able to perfectly replace the current very large option, purchased in the retail point of sales or furniture store.

The process of self-creating the table is interesting and on the other hand, since the freedom of creative expression of the author appears with the help of it. It can be represented as a noticeable element of the interior of the room.

The creators of manual amateur furniture are not just called joiners. It does not apply to the usual definition like: Sounders or bedside beds, and maybe lockers.

Having gained experience in this direction, over time it will be possible to create exclusive types of tables that are characterized by advanced characteristics.

Now consider the question of the independent creation of wood-based tables.

Wood is characterized by cleanliness and accessibility, in addition, it is not so difficult to process, like other materials. It transmits the maximum energy of the aesthetic filling of the style of the residential room.

At the expense of its properties condescendingly refers to the mistakes of beginners in the field of independent creation of furniture. However, thinner versions of the tables will require an advanced level of skill.

To begin with, learning to work with wooden things, then it will be easier to use as a material: glass, plastic or even metal.

Selection of tools and room facilities

To engage in independent creation of tables or other wooden furniture elements, it is necessary to use only a non-residential room.

This is due to the specifics of working with wood. It leads to the formation of a large amount of dust, chips and other waste.

And the process of toning or creating protection for material based on the simulation is capable of forming dangerous release into the air. Actually nitroleki can also be dangerous.

Because of this, for a personal joinery workshop will have to take care of the air ventilation. Specialists advise creating artificial ventilation of the premises.

Many for this use a garage, however, waste production can pollute or damage the car because of this is not the best option.

Joinery tools belong to modern and traditional species

For the most part, for a start, it is possible to limit the simple carpentry tool, however, it may be necessary to see modern versions in the form of:

• The swivel version of the stub, helps to create a sleep based on two planes, adhering to the required size.

• This tool will open all its beneficial properties, first of all, with an ampace saw. This couple is considered universal, it can come in handy for the fulfillment of many works.

• The handmade version of the universal electric jigsaw, which is characterized by a tilted shoe, helps create a propyl based on the necessary angle with respect to the vertical plane.

• Disk version of the grinding machine. It will help newcomers to process the tree surface approximately for 5-15 minutes. An experienced joinear together with the skin will be able to perform the same work for about an hour.

And there is also an ordinary grinding ribbon machine and for grooves with in-depth places, characterized by a protruding option for the working part.

Such tools are highlighted by the price and narrow specialization of work, experienced masters recommend that they take them into a short lease term.

The best specialists using, various grinding machines can even create an effect of artificial aging wood, however, it is a very difficult job as for beginners.

What tree is suitable best?

To create a wooden table, any wood, which has an average resistance to the rotation process, however, should be refrained from soft versions like: poplar, willow, wood of ailant, aspen and more alder.

Of the domestic types of wood it is best to use:

• soft versions in the form of pine, fir, cedar, horse chestnut, plane, juniper or ate.

• solid in the form of an ideal oak suitable for many works of beech, maple, nut or ash, larch, as well as fruit rocks represented by apple trees, plums, pears, apricots and quince. And also here should include Elm and Ryabin.

• pretty solid views based on acacia, tees, stone birch, dogwood and says.

Conclusion

The table and probably all kinds of furniture created by their own hands, I want to decorate with an artistic version of the painting, and not ordinary stripes.

However, over time, the drawing can be spoiled so that this does not happen to rub the paint into the depth of the tree to the varnishing process. This can be done on the basis of equipment - lesing. We are talking about layer-by-layer rubbing, using paints.

Photo tables do it yourself

From the abundance of the proposed furniture, wooden tables and chairs remain popular. Natural materials provide environmental friendliness, safety and durability of models. Furniture from a wood array can be found in any country house, an apartment or office.

In addition, wooden furniture can be made independently.

Kitchen tables from wood

Before buying the table, you should consider several nuances. It is from them that the comfort and mood of households in the kitchen depends on.

Ergonomics

Due to the fact that in small-sized apartments there are small kitchens of small sizes, do not forget about ergonomics. First of all, choosing a dining wooden table, you should consider comfort behind the stay near the kitchen items of the furniture.

It does not comfortably happen when you get drunk by elbows or legs in a neighbor or in the feet of the table. In addition, it should be the optimal distance from the table to other furniture items. The table must be at about a distance of 80 cm from the walls and other items in the kitchen.

An important role is played and the height of the table. It should be selected depending on the growth of sitting people behind him. Low (70-74 cm) Tables are recommended to low people. Those who have an increase range from 1.6 m to 1.7 m, should buy tables with standard sizes (75-76 cm).

Appearance of table tops

Before choosing the design of the table top, you need to count how many people usually need to be placed. Forms meet: oval, round and rectangular and square.

Tables that have no angles should be placed in spacious kitchens. Tables with a mold of a square or rectangle fit perfectly into small rooms. It is necessary to see whether the appearance of the table is suitable for a common interior.

Practicality

There are many models that carry additional functionality, namely, the cabinet is replaced, they can develop and decompose if necessary.

The wooden sliding table is an excellent solution for those owners who suffer from a lack of place in the food facing room.

Like any furniture, these products have a number of positive and negative qualities. Wooden tables in the kitchen possess the following advantages:

• the uniqueness and uniqueness of the texture of the tree, which is impossible to recreate;
• ability for a long time to withstand hits and daily operation;
• environmental safety, thanks to natural material that does not contain glue and does not distinguish harmful substances into the atmosphere.

Negative characteristics include: high cost, vulnerability to moisture and dampness. At elevated temperature, the material can dry, thereby forming the crack and loosening the table. Over time, the surface may darken or expose the invasion of pests.

Wood table in the living room

Recently, the residential premises in white colors has become fashionable. The combination of white furniture and light design of walls and windows is actively used. Dark and white color can also be combined in furniture.

For example, the tabletop can be white, while the legs and edging of the table are dark. This furniture is often used when placing a room in a minimalist style. In the spacious living room or in the studio, the White Wooden table will become an excellent solution.

A glass and wooden table is often located in front of the sofa, it can be low and used as a fashionable furniture element in the hall. It is intended: for tea drinking in front of TV, storage of books and magazines, as well as for work in front of the laptop.

Table of wood massif in the country

The most important place to collect close people and guests is a gazebo or space in the open air.

In nature, it is still drawn to the whole natural, so that the wooden table for the cottage is a combination of beauty and practicality in one subject. In addition, this element of furniture is perfectly combined with a common rustic style.

Tables made of wood for the summer cottage should be not only durable, but also moisture-resistant. If the table is often exposed to moisture, you should choose a product from larch.

Country tables must have a property do not spoil under the scorching sun. Due to its density, the best material for the country table is considered nut or oak. This wood is considered solid and expressive. For confrontation from pests, Oak is drown, that is, they are withstanding in the water for a while. Such material is more expensive than its fellow.

You can save if you choose a table of coniferous wood. They have ease, pleasant color, odor and moisture resistance. Increased resin content is opposed to water absorption.

How to make a wooden table yourself?

Some daches are mastered tables themselves. Creative approach and hard work will save and create a unique thing on your summer cottage. Make a wooden table with your own hands is not at all difficult. It is enough to have in your arsenal necessary materials, tools and some time.

Tools and materials required for manufacture:

• plane;
• grinding machine or paper;
• screwdriver with a bit of bit;
• lobzik or saw;
• chisel;
• funds for sea and varnishing;
• metal corners;
• yardstick;
• building level;
• accessories for fastening (screws, bolts, screws);
• boards thick 40 or 50 mm;
• 4 bars for wooden feet of the table with a size of 50x50 mm;
• auxiliary boards with a thickness of 40 mm for attachment of the table top.

Procedure (step-by-step instruction)

• Determine the dimensions of the future homemade product. With the length of the table, more than four racks are needed more than standard values.
• Boards for the tabletop will pre-firm and write their desired size.
• It is parallel to five boards, copp them with self-draws to the auxiliary transverse boards. It is necessary to leave a place for the feet of the table.
• Install bars for legs with metal corners and consolidate them to the tabletop.
• To prevent breaks and stability of the legs, skip the bar on the perimeter under the table top. If the table has more than four legs, in the middle it is necessary to strengthen the additional transverse bar.
• The edges of the table top clean the sanding skurt from all sides.
• Cove the product tools from pests (veneer) and, if desired, apply a layer of varnish.

There are many ways to create the table with your own hands. The final version of the improvised wooden table proposed by us can be viewed in the photo.

Tables of wood for kids

When the young Chado will grow and begins to sit independently, it comes time for feeding various supplies.

A wooden table for feeding is the most successful version of furniture designed for a comfortable meal. Tables are usually done together with chairs and have a common design.

There are several types of children's chairs:

• transformer chairs
• highchairs with adjustable back.

In the first case, the height of the seating is adjustable for its intended purpose. A child may not only have a table, but also to play if you remove the folding table from the tree and omit the seat.

In the second case, the adjustable height of the seating allows you to raise the baby higher or lowering at a safe distance to the floor. Even in the event of an unsuccessful maneuver, the child will not be able to harm himself and will give the opportunity to do everyday affairs in the kitchen.

Buying wooden tables for feeding, parents may not worry about the health of the child - he will not appear allergic reactions. Therefore, natural wood material is most often used to make children's furniture.

When buying a table should pay attention to sharp corners that can cause unwanted damage to his small owner.

Finally, I would like to say that thanks to wooden furniture there are many opportunities to equip a dwelling under a different design. Especially popular is a rustic style with the use of natural materials and copying the interior under ancient.

Security and own health directly depends on the type of materials that are in your home.

Another important fact, a tree is such a material with which you can work without applying complex tools and equipment. Thus, any man can create beautiful things on their own for acceptable money.

Photo of wooden table