Decorative plaster under the brick do it yourself: video lessons of simple solutions. Imitation brick plaster: rub the walls under the brick with your own hands the decoration of walls from the masonry solution

With the appearance in the middle of the XX century Loft style, brick walls became incredibly popular. But not always there is a real laying in the room, so it is often imitated by plastic panels, wallpaper, tiles, etc. In this article we will look at what methods can be done artificial wall Under the brick using decorative plaster.

What does the plaster look like under brickwork

Decorative stucco under the brick is used for wall decoration, arches, door openings in apartments, cottages, office or administrative premises. It is possible to use this type of finish to highlight individual sections or parts of the wall. Less expensive cement-based compounds are used to facade buildings facades. But bricks from light or red stone look most successfully, extruded on decorative plaster.

Below is a photo of imitation brick wall From plaster in the interior of premises and finishing facades.

But the most qualitative and durable are the finished compositions based on polymers: silicate and silicone. They are plastic, easily distributed over the surface and possess high adhesion (clutch), durability and moisture resistance.

For savings can be independently made decorative plaster from ordinary putty .

Preparation of walls

Walls to which decorative brickwork will be applied require a certain preparation.

Wall curves need to be aligned plastering or, for example, plasterboard sheets.

Remove the jet finish. If the decor is planned for the old plaster layer, it must be cleaned, create a rough surface, treat adhesive primer. The fragile parts are knocked down from the wall, cleaned the chips and shap skin. If the surface was previously painted, the paint layer is also deleted, otherwise the plaster will be kept fraud. This is described in detail in our article: "Is it possible to stucked by paint: how to do it?" To read .

Before plastering the wall is so ground. Universal fit for interior decoration acrylic composition Deep penetration. The primer will improve adhesion, connects small particles and dust on the wall.

Imitation of brick masonry with their own hands

There are several ways to make "bricks" with decorative plaster. Let's describe each of them.

Creating bricks using a stamp and roller

You can find special silicone or polyurethane stamps on one or more bricks. They are gently applied to a slightly dried plastering layer on the wall, and then also neatly, trying not to damage the impression, extract.

If when applying "bricks" arose small defectsThey smoothed them with a spatula. In case of insufficient grazing of the plastered wall, the impression may turn out to be lubricated. In this case, the surface must be switched again, wait for a while, and apply the form again.

Another way to make a print on a brick wall is the use of textured rubber rollers. The roller is rolled along the plastered wall in the horizontal direction. At one time it turns out two - four bricks (depending on the width of the roller).

With the help of Scotch

To create an artificial masonry, the place of future seams is placed in a pencil on a dry wall. At first from the floor to the ceiling from one edge, marks are made after 7.5 cm. Then on the opposite side. The horizontal lines can be controlled by a bubble or laser level.

Over the markup sticks larger (paper) tape width 1-1.5 cm. It is not always possible to find such a scotch on sale, so often you have to buy bigger size (3 cm) and cut the diet along.

The horizontal lines are glued first, then vertical. This time-consuming occupation, which will take several hours. What the markup looks like shown in the diagram:

In order for the ends of the ribbon to be easily found under the layer of solution, they are removed abroad of the plastered site.

The wall is covered with solution right over the tape. The thickness of the layer is 3-5 mm.

After alignment, they begin to pull the tapes. When scotch is cut off, a clear drawing of the seams remain on the surface. After complete drying, uneven marines are cleaned. Vitely this method will be shown in the video below.

Cutting bricks

The masonry seams can be cut on a slightly fucked plaster and with the help of undergraduate means - a small spatula, thick needles, or any other pointed items of suitable size.

"Draw" seams is necessary until the plaster finally hardened. To the wall did not look too smooth, at the end of the work on it it is better to walk by sandpaper. The rough surface with the battered seams will be more like a wall-laid out of bricks. To the wall looked realistic, you can add small scratches and chips.

Rusted plaster

To simulate bulk bricks or massive stones on house facades, rusters are used - straight seams separating the surface to blocks. There are several ways to create them:

with the help of a wooden crate;
packing with a metal rail;
pulling through patterns;
drinking saw a rule ( construction tool in the form of a long line).

When creating masonry, it is not necessary to make lines too smooth. On the seams there may be small irregularities that give the wall more expressive texture.

Video

As with your own hands, make decorative plaster under the brick is shown in the next video lesson. The master marks and extrudes the masonry seam using the rule.

In the next video, it is shown how to do using scotch.

Other master classes on the application of decorative plaster can be found in our video section.

Painting of bricks from plaster

After drying the plastered surface, it is painted with acrylic, latex, alkyd or water-emulsion compositions. When choosing a color, you can stay on natural red-brown or experiment, mixing them to get a unique shade.

The kel can be added to the plaster mix when it is kneaded. But in this case, it will have to prepare a solution at once on the entire wall, otherwise the shades in individual sites may not coincide.

Seams painted with a thin brush separately. A good reception is to apply two layers of paint. different color: The second is applied a couple of minutes after the first, that is, before drying it. Sometimes different bricks are allocated with a different shade from bright yellow to almost black.

To protect against dust and dirt, the surface is additionally treated with matte acrylic varnish.

We hope that the article was useful to you. Leave your feedback and questions in the comments below.

Decorative plasterArtificial brick of foam: lesson on finishing with your own hands

Exists a large number of ways to make the interior of their home unique. We use popularity modern styles, implying orientation to ensure free space in an apartment without separating its partitions. They also allow combining various design solutionsthanks to which you can successfully combine rough design Brick walls with modern metal interior objects, new-fashioned technique. Imitation brick masonry Give freshness and originality to the apartment.

There are two main ways that allow these work with the greatest efficiency and aesthetic attractiveness:

Brick imitation with fire-resistant gypsum tile with the necessary insulating qualities.
An image of masonry in the form of a pattern that is applied to the crude plaster.

Imitation with drawing is a fairly common option, allowing to save on materials. In addition, the work itself is simple and does not require large costs time and resources.

How does the drawing on the plaster make the interior original?

Drawing bricks on the plaster can be a fairly exciting occupation, allowing you to realize your imagination and creativity. Walls of the apartment will look in a new way if the lines of the seams between the sections will be slightly twisted. Such an easy negligence gives the naturalness of the interior, creates the illusion of this masonry.

You can paint the resulting brick rectangles in their natural color, and you can leave them without staining or paint the seams with darker paint. In the first case, you will even emphasize all the naturalness of the masonry, and in the second - will focus on minimalism in the decoration of the interior.

The master has the ability to also experiment with the form of bricks themselves, making them the correct configuration with pointed edges. Additionally, each rectangle can be treated on the front side, giving it or smoothness or some irregularity and roughness.

Also, a good option is to decorate under ancient, when all the imitated brickwork is aged due to special surface treatment and staining.

Imitation of bricks in the interior with smooth and ribbonal outlines

It is not necessary to draw each brick evenly and the same size. You can ask them absolutely different sizes Both shape, portray uneven edges and excavations. Such decoration will perfectly look at the design of the recreation area in the living room. An interesting option is the combination of such a masonry with other ways to process walls.

Stucco, imitating masonry, looks like expensive clinker tile

Preparation of walls for registration

On the initial stage work follows B. obligatory Align the walls. With the help of a long rule, the curvature of the surface is measured. Since the thickness of the finishing layer does not exceed 1.5-2 cm, it is necessary to get rid of serious (more than 2 cm) wall curvatures vertically. To do this, the plaster mixture is applied. Decoration should be started after a complete drying of the mixture - approximately a few days after alignment.

In order for the layer of plaster in the subsequent, it is necessary, it is necessary to pre-apply the walls before applying the solution. It is required to correctly choose the primer depending on the material of the walls. It is also individually determined by the number of primer application.

After carrying out preparatory work You can proceed to decorating walls in the form of brick masonry. For this, two ways are most often used:

Cleaning seams with a scraper;
Application of painting tape for decorating.

What mixture is better to use?

For brickwork images on the walls most suitable material It is gypsum plaster. By choosing the mixture, it is advisable to navigate on the brands that are characterized by:

ease of application;
excluding shrinkage;
lack of need for preliminary and additional putty of walls;
ecological composition.

When applying a layer of plastering with a layer in 1 cm, the mixture consumption per 1 m2 of the surface ranges from 8-9 kg. It is not recommended to mix the plaster mixture with tile cement glueIn order not to crack and peel off the finishing layer from the base.

Imitation of brickwork with a scraper

For carrying out plastering works, it is advisable to have such tools:

steel spatula with a blade width of 20-25 cm for applying plaster and its leveling;
a narrow spatula with a blade width up to 10 cm for the convenience of working with a wide spatula, as well as for adjustments to small flaws;
scraper, which can choose a chisel or a homemade steel plate with a blade thickness up to 1 cm;
long rule 1.5-1.8 m;
box used by masonry.

Depending on the volume of the prepared solution, the surface area for processing is calculated. After the browning of the wall, the mixture layer is applied with a wide spatula, which is then smoking. The marking of the seams can only be carried out after drying the solution. For this, the long rule is applied to the wall, and in the horizontal plane, the borders of the seams are drawn with an acute end of the plate. Their thickness ranges from 5 to 10 mm.

When booking the seams, the planned drawing should be taken into account. It is advisable to focus on standard size Brick 250x65x120 mm. At the same time, masonry standards are most often used:

in Pollipich;
in brick.

In both cases, during the markup take into account the dressing of vertical seams.

When the seams are outlined, with the help of a scraper begin to process them. Apply a pattern that imitating the masonry, you must first at the beginning of the long horizontal seams, and then short vertical. The width of the planned seams is carried out by a scraper by removing excess plaster. The depth of cleaning of the seams is determined by the designer plan, but it is recommended to adhere to the depth of the finish from 3-6 mm. Seams can be given the form using the bunch.

Application of painting tape for pulling seams

The use of painting tape is a more time-consuming option for performing work, because often tape is seriously separated or removed with a part of a solution from bricks. After removal, it will be necessary to process the verge of crushed sections.

After the priming on the surface of the pencil, the seams are placed and a narrow rapid scotch is glued on them

If you decide to use this approach, you first should be projected to the wall. Then the pencils are drawn by future seams. It must be done before applying plaster. Marking You can take the standard - in the Pollipich or Brick. The drawbacks are imposed on the drawn seams, the ends of which should be removed beyond the territory being processed.

The gypsum solution is applied to the wall using a spatula. Stitches closed with tape are also covered with plastering solution. Then the plaster is recreated. It should dry, after which it is pulled for the end of the tape and carefully remove it. Together with the scotch, the plastering from the seams will be removed. It should be avoided by tightening the process, because with full drying the mixture properly remove the scotch.

Coloring of the surface

After creating the seams, it is advisable to eliminate all the flaws in the appearance of the drawing and give the plaster to dry. The residues of the solution are removed on the edges with a dry cloth until the moment of complete drying of the solution. And the wet sponge will help make the face with smoother and smooth.

Then on the prepared drawing should be applied a layer of paint in two stages:

Paint is used to dye all the wall. It is possible to effectively work with a brush or sprayer.
The tassel is applied to the colors of the selected color separately along the entire length of the seams.

The use of the brickwork imitation method in decorating the interior of the premises is good decision, enlivent atmosphere and attaching originality. This work can be performed on your own, choosing the color of masonry, sizes, shape of seams and brick sections.

Video: Stuccoat of walls under brick with their own hands. Interior decoration - Brick imitation

People always seek to improve their home. The desire to update the furnishings of the premises always finds a proposal in the field of various design developments. Imitation of a brick wall in the interior of the dwelling causes live interest from the population. To decorate the room with walls in the form of brickwork, do not need to do it from natural material. It is enough to create its imitation. Few know how to make a brick wall imitation. Inventive people invented many ways to create different coatings Walls depicting a brick wall.

Decorative walls of walls in the form of brickwork

Brick in the interior may look not only in the form of convex elements correct geometric shape. It can be imitated laying of wild stone or other natural materials.

You can create brick masonry imitation with your own hands or purchase ready. decorative brick In the form of tiles. In construction stores offer similar material In a wide range.

Whatever the imitation of brick masonry is selected in the interior of the room, it is necessary to prepare the bases of the walls.

Preparation of walls for decorative finish

Before starting to decorate the walls under the brick with your own hands, you need to prepare the surface of the fences. Preparations are made in several stages:

Walls cleaned from the old finish coat, dust and dirt.
Surfaces are equalized by putty. The putty is applied on a plaster basis.
After complete drying, the walls are covered with primer.

Methods of imitation of brickwork

Exist various methodsHow to make a brick masonry imitation. Here are the most popular of them:

Coloring method

One of the cheapest options to portray the view of the brick masonry on the wall - the surface of the vertical fencing surface. This can be done by 2 ways.

Option 1 implies the following actions:

the prepared surface is painted with roller;
the painted wall is discharged on a variety of rectangles; Rectangles must depict side surface brick;
"Bricks" are separated by horizontal and vertical stripeswho should look like laying seams;
the seams are isolated in dark paint.

With the second version of the seams need to be done differently. Over the crude shplatovka, you pledge vertical and horizontal grooves. Make it with a suitable girlfriend tool.

Then the entire surface is ground and stained in the desired color.

Grooves are isolated by different color, and sometimes left in the same color as the entire wall is painted.

Walking walls in the form of masonry

Brickwork can be depicted from plaster. Such an imitation of a brick wall attracts with their own simplicity. For this method, you need to be unreasonable with adhesive tape (scotch). Act as follows:

The prepared surface of the wall is covered with scotch strips. Strips glued so that they look like the seams between bricks.
The plaster layer is thrown onto the wall. Some experts claim that it is better to make hands. Hands should be in rubber gloves.
Depending on the taste of the host, the surface, finished by plaster, is embossed or smoothed by a spatula to an even state.
As soon as the layer of plaster on the wall becomes half the frozen, the tapes of the scotch begin to pull up the top.
Pull out adhesive tape So that after it remained smooth grooves.
As a result, the wall acquires a kind of brickwork.
Made from plaster Bricks on the wall do with their own hands and paint.
On the brick wall of the stucco, the grooves in the form of seams are covered with more dark paint.
The spatula adjusts the decorative relief of the raw plaster.
The brick wall of plaster is ground and stained in the desired color.

Video:

In some cases, do without adhesive tape. The grooves are premined for a ruler wooden stick.

For greater strength, the plastering solution is prepared by mixing cement mortar With adhesive composition for tiles in proportion 1: 1.

Making homemade tiles under the brick

Imitation of a brick wall with your own hands can be made using homemade tiles. For the manufacture of tiles under the brick, you need to make a form for casting a gypsum decor.

At home, you can independently make a silicone form for casting decorative elements. To make it, come as follows:

acquire liquid silicone and hardener in the store;
manufactured wooden drawer; It can be made from construction plywood;
products harvest or buy ready-made decorative tiles;
mix liquid silicone with hardener and pour the mixture to the bottom of the box;
in liquid silicone, lower decorative tiles or patterns face down;
when the mixture is frozen, the tile is taken from the box; Silicone form is ready for the casting of homemade bricks.

Making decorative bricks

Having received the finished shape, proceed to the manufacture of decorative bricks. Do homemade tiles So:

To obtain decorative coating without damage, working surface Forms are lubricated with fat composition (vaseline, machine oil or similar substance).
Prepare liquid plaster or alabaster.
The solution is poured into a silicone form.
After 2 - 3 hours, the finished tile is removed from the form.
Recess finished products Does not create difficulties. Silicone is good, and bricks easily fall out of the form.

Before filling, the bottom of the form can be coated with a layer of coloring substance. As a result finished tile It will be painted in the desired color.

Also cast a gypsum decor in polyurethane forms. Polyurethane is more hard material and practically no nervous.

Mixed tiles and wooden formwork. The method allows to obtain material only with a flat facial surface.

Technique laying gypsum tiles under the brick

Brickwork with their own hands from the plaster tile is made in the same way as styling on the walls of ceramic tiles:

bricks are placed on a cement adhesive mixture or liquid nails; Wooden rails are used to form smooth seams;
long planks are investing in horizontal seams; Vertical rails make a length equal to the height of the tile, or apply plastic liners;
after the masonry of the next row of rail bricks take out; The seams are filled with the same adhesive composition or apply a special mixture for the bulk of intercutric gaps;
at the end of the work, the wall under the brick is painted with their own hands or varnished;

Sometimes the laying of decorative elements is performed without seams. Small gaps between the tiles are watched by putty.

Wallpaper

Imitation of bricks on the walls can be framed in the form of wallpaper. Market building materials Offer big choice Wallpaper with brickwork.

Paper

Rolled wallpapers on a paper basis can be decorated in the form of brickwork of various shapes and colors with a latch and without it. Family laying on a paper basis One of the cheapest options for decorating walls under the brick.

Roll wallpapers on a paper basis are sold 50 cm wide and 10 m long. They are easy to cut on comfortable segments. Of all species finish finish inland walls paper wallpaper - the cheapest material.

Vinyl

Brick wall with your own hands can be made of vinyl wallpaper. Vinyl embossed coating well transmits the structure of the masonry. Convex forms create a full-fledged spectacular perception Natural brick wall.

Main advantage vinyl coatings is their high moisture resistance, so vinyl surfaces can not only be subject to wet cleaning, but also to wash.

Liquid wallpaper

Material is easy to handle. Using a girlish tool surface liquid wallpaper Form in the form of a relief of brick masonry. Pretty soft Material Allows you to create imitation of masonry elements of the most diverse shape and color.

Wallpaper is glued to the prepared walls quickly, and the process of pasting does not particularly clog the room, with the exception of small wallpapers.

Styrofoam

An interesting solution is offered designers in the design of wall decor in the form of foam bricks. Polyfoam - soft unusually lightweight material with low thermal conductivity and high sound insulation. Decorate the walls of the foam so:

A cutting tool on the surface of the foam is easily cut out any relief of masonry. Also form facial planes of bricks.
Processed foam plates are ground and stained.
Polyfoam has high adhesion, so it can be mounted on the walls on any glue. Often use PVA glue.

However, it should be noted that the main disadvantage of this type of finishing is its softness and fragility. In case of careless circulation, the surface of the foam is easily damaged.

Repair damaged areas from foam plastic is quite simple:

the foam crumb is mixed on PVA glue;
the spatula is filled with a mixture of damage;
the renovated area is ground and stained;
if damage is more ambitious, then an unsuitable fragment of the finish is cut out; A new foam is inserted into his place.

Wooden plate

The surface of the body of corporal color excellently conveys flavoring the surface of the burned brick. As a decor use a parquet board.

If the farm has an appropriate woodworking equipment, then the plank can be made independently.

Rolls best to do from coniferous rocks Tree. "Brick masonry" in the interior of any room in the form of wooden bricks will give the interior of a special sister.

Wooden elements are attached to the walls with special glue for wood. You can also apply other adhesive compositions (PVA, liquid nails, etc.).

To emphasize the texture of the tree, the skull is opened with furniture varnish.

Seams between masonry elements is best made from wooden Reques. In no case can not apply wet compositions. Moisture can impregnate wood and disrupt its structure.

It doesn't matter what material make a brickwork imitation with their own hands. The main thing is that the decorative wall decoration brought aesthetic pleasure from the perception of the interior of the entire premises. All the above materials are environmentally safe and will decorate any interior in accordance with the tastes of the owners of the home.

The idea of \u200b\u200brecreation in the house of the brick wall is not Nova, but in lately She acquired a special popularity due to modern trend free I. non-standard design Residential premises. If earlier the brick was used to decorate fireplace walls and more associated with cottage style, now it is confidently used in the design of rooms of various purposes.

In the case when the walls are lined with brick and such decoration is provided in the project, it is enough to level the seams and treat them with a special putty, then coat the surface with specialized wax or varnish.

You can also clean the brick wall from the plaster with the help of a grinding machine, but the necessary aesthetics of the laying that opens will not be guaranteed.

Obviously, making extra natural masonry, especially in the city apartment, is not always appropriate. In this case, simple imitation technologies will come to the rescue, familiarizing themselves with whom you can decorate the walls with your own hands.

Decor design with brick decor

Brick wall - an indispensable attribute of loft style apartments. Making imitation in this style, you need to ensure maximum natural viewAt the same time, the drawing should be rough and negligent if possible, leaving the impression of the injustrial part of the production room.

A varied brick decor is used to create separate areas in the kitchen, in the living rooms and bedrooms.

Panels or solid walls under the brick allocate the working and dining area, the location of the home theater screen. The options for imitation of the brick wall proposed in the photo will make it possible to understand the nuances of its combination in various styles.

The brick wall can also become part of the thematic design of the children's room. Brick background with natural color is also perfect for the design of the eco-zone in the house with houseplantsplaced in stylish caspo. It is well combined with canned moss and artificial grass on the walls.

The focusing of doorways and protrusions is another field for decorating under the brick.

Decorative stucco for brick imitation

Imitation textured plaster Allows you to avoid thoroughly aligning the wall before work, moreover, the final result does not require perfect smoothness.

Step-by-step performance looks like this:

Wall Preparation: Removal of Finishing, Magnification of Holes, Cleaning from Dust and Primer. Then you need to wait for the wall drying.

Kneading the plastering solution. Decoration will pass in gradually, on every square meter of the surface, so it is made small, spoken to the eye.

The desired proportions of water and powder are determined by the instructions on the package, the dye is added when mixing. When testing, the finished mixture should not crawl from the wall or collect with bunches.

Applying the main layer. With the help of a trowel and a spatula, with typical movements when finishing with plaster, the mixture is evenly applied to the wall, the excess solution is removed.

Application pattern. It is necessary to proceed to this responsible stage until the plaster layer hardened. Having done a preliminary note on the size of the brick, wooden stick the desired diameter The lines imitating masonry are drawn.

In this case, the excess solution coming out during operation is removed using a cloth. Further, by the same scheme, the following sections of the wall are covered.

After the mixture has finally dried and hardened, the clock is performed and the correction of the pattern with the help of sandpaper.

There is another option to obtain a decorative seam. After applying the main layer plaster mix Without a dye, a portion is mixed with the addition of a dye, which is prexicated by the masonry lines, then a deepening is done. After clearing the edges, the painted layer remains only in the recesses.

Imitation of a brick decor using foam

Manufacture brick decor From sheets ceiling foamflast - simple and creative process. To obtain chaotic roughness and chips on the cut blanks, you can use the tools for a thread or soldering iron.

At the stage of painting, to give greater naturalness to the decor, you can experiment with different colors.

The easiest way to fasten bricks from foam - rings on a pre-cleaned and crushed surface of the wall. Billets are placed at a distance of 2 mm from each other.

Wallpaper under brick

Advantages of textured wallpapers for brick imitation: affordable priceEasy and fast installation and hygienic care process.

Choice external view The walls will be limited to the design and quality offered by the manufacturer. The most naturally looks like wallpaper with a layer of foamed polymer.

Imitation panels

Such a finished decor is made of plastic masses and glued directly on the wall. It has important importance preparatory stage To obtain an impeccably smooth and smooth surface of the walls.

This can be achieved by plaster or cladding of plasterboard, at which the heat insulating layer is also created.

You can also apply the mixture method inside indoors, metal - for the external walls of the terraces, open balconies or facade. Plate catalogs with a variety of sizes, colors and textures for decoration of walls under the brick will make a choice for every taste.

Stencil and drawing brick on plaster

Finished lattice stencils made of rubber or plastics are tightly applied to an unworthy plaster making recesses that imitate brickwork.

The same effect can be achieved by hand, causing a stucco stucco with a random relief and drawing the line of bricks.

Corrugated cardboard decor and napkins

The chopped blanks from cardboard are fixed on the walls of PVC glue, while the glue is applied so that the edges remain free.

Then the surface of the blanks of billets with dense white paper napkins with a pattern appropriate by texture is performed. When gluing, you can add additional chips with compression napkins in random order.

At the next stage, the characteristic bends that are fixed are made at the edges of the blanks. adhesive pistol. After drying, the decor is covered with a layer of varnish. This simplest way to simulate bricks in the interior is suitable for an accent decor on small squares.

Stock Foto Imitation brick wall

The brickwork in which the strict drawing of the seams is harmoniously combined with the "individuality" of each stone laid in the wall - business card Interior style Loft.

The idea to reproduce the skillful work of the mason in its apartment like many. To implement it, it is not necessary to take a celma and hammer. It is enough to make a brick masonry imitation on any wall or in a separate area.

There are two options for doing this work: the use of gypsum tiles, imitating brick, and applying masonry on raw plaster. The second way is not only cheaper, but also easier to the first. We will talk about it in this article.

Examples of plaster under the brick in the interior

Before proceeding with the study of the technology of wall decoration under the brick with the help of plaster, we will get acquainted with several samples of doing this work.

The photo below shows the original imitation of brickwork. Its author deliberately left the smooth lines of dissolved seams. The result was an interesting surface, as if a bricklayer was notaclely folded.

But a typical sample of unloaded gypsum plaster "under the brick". Work is done qualitatively, so even with close distance Imitation is indistinguishable from genuine facial masonry.

Coloring Brick B. white color With the discharge of seams, the dark is a common decorating reception. It is often used in the interiors performed in the Scandinavian style.

Red brick - good, and white "Scandinavian" is better!

To create a beautiful surface, it is necessary to neatly modify the raw plaster in the form of bricks. In addition, it is necessary to carefully handle the "face" of each stone, giving the array the type of the aged masonry. Good example We see this approach in the photo below.

The master worked the surface of each "brick", giving the wall unique texture and color

Standard masonry stone proper form With sharp edges - not the only option of decorative plaster. Designers love to use brick imitation in the interior with smooth and ribbonal outlines.

Stucco under the brick, you can decorate not only a solid massif of the wall. With it, you can make a apron in the kitchen, reorganize the corners and doorways.

Stucco, imitating masonry, looks like expensive clinker tile

How to make a wall finish under a brick stucco with your own hands?

To begin with, consider the starting conditions of this technology. Without their observance, work will not be able to fulfill efficiently.

Preparation

The thickness of the finishing layer imitating brick is relatively small (0.5-1.5 cm). Therefore, a wall intended for such a decor should not have large depressions and protrusions. Before starting work, measure the level of surface curvature, using a long rule. If the variation of the wall from the vertical exceeds 2-3 cm per 1 m length, then it must be aligned with a plastering mixture and give several days to dry. Only after that you can start decorating.

What master class of brickwork imitation you do not look everywhere mandatory operation is the primer of the surface before applying the solution. Without it, the layer of decorative plaster will be tracked over time. The type of primer is selected, based on the wall material.

There are two technologies for applying a brick decor:

With a slit of seams by a scraper.
Using for the formation of pavement seams.

We will look at both options and give our comments on each.

Sleet seams of masonry scraper

The main tool for applying and leveling plaster is a steel spatula width of 20-25 cm. For convenience in work, a narrower spatula can be used with it (5-10 cm). With its help, the solution is applied to a wide tool, smaller protrusions and fumes are corrected.

Work leads by individual sections - the invigs. Their area depends on the amount of solution that is preparing at a time (10-15 liters).

At first, on the primed surface of the wall, a wide spatula smear a gypsum plaster, periodically smoking her layer.

After the solution serves a little, the marking of the seams is performed. It is most convenient to do this work with the help of a long rule (1.5-1.8 m). It is applied to the surface of plaster and the sharp plate, it is stuck in it seams. Their width is selected in the range of 0.5-1.0 cm.

"Figure" of masonry depends on your preferences. In this case, the size of standard brick should be observed (length 250 mm, 65 mm height and 120 mm width). As it fell to draw bricks on the wall it is impossible. By making markup, you need to take into account the dressing of the seams.

After the seams are hard, the scraper is entering. It may be a narrow carpentry chisel or homemade adaptation From the bent steel strip.

They carefully lead along the seams, removing the plaster. The depth of seams depends on the thickness of the layer decorative finish And it can be from 3 to 6 mm.

Work is not so comfortable. Surplus of the solution from the seams form a "fringe", which is constantly deleted.

There is another tool for the formation of seams - the extension. They enjoy the bricklayers at the finishing stage of the masonry. Using the seam branch, you can give a convex or concave view.

Cutting plaster starting with long horizontal seams, and then go to short vertical. Having done this work, the plaster need to give time for a durability. Before that, all the admitted flaws and inaccuracies should be eliminated, since it will not be possible to do it on the solidified layer.

Surplus the solution remaining on the edges of the bricks after the slit of the seams, is cleaned with a dry cloth immediately after the completion of this work. After that, if desired, you can smooth out the face with a moal sponge.

Last operation - painting the imitation of a brick wall from plaster. It is performed in two stages. First, the whole array is kept with a brush or sprayer. After that, the narrow tassel neatly scratch the seams, following the paint, the paint does not hit the surface of the brick.

To create masonry imitation, many masters use the plastering of the wave. Mix cement tile glue with gypsum plaster do not do it. Different types Binding substances do not get along with each other. Therefore, the finishing layer over time can be detached from the base.

According to the consumption of plastering mixture, the following can be said. With a layer thickness of 1 cm, its flow per m2 of the wall ranges from 8 to 9 kg. The standard bag (30 kg) in this case is enough for 3.5 m2. At the price of a bag of 450 rubles, one "square" of plaster will cost 128 rubles (450 / 3.5). If you add to this price of primer and paint, then the total number of expenses will be at the level of 180 rubles / m2.

For comparison, let's say that the minimum cost of gypsum tiles, imitating brick, is 400 rubles / m2. By adding the price of glue, we get 480 rubles / m2. This is more than 2.5 times more expensive imitation of gypsum plaster.

Formation of seams using painting scotch

In this embodiment, after the priming on the surface, the seams are placed on a pencil and a narrow larger tape is pasted on them.

The ends of the ribbon are removed abroad the plastering site and apply a gypsum solution directly to the tape. Aligning the plaster and leaving her a little, neatly pulled out of the ends of the tape. Scotch removed from the layer of plaster leaves on the wall drawing of seams.

It should be noted that it is more difficult to make brickwork imitation with your own hands than remove the solution with a scraper. This work takes more time and requires additional stripping of brick faces.

In the inept hands, tape is not always separated evenly, fascinating the part of the solution. Therefore, we recommend using the methods of forming a picture with a chisel or scraper.