Christmas tree from rails on the fence. Deaf fence "Herringbone" made of WPC and HILST aluminum profiles. To install a fence, the following materials are required

A fence is an integral element of any site.

Creating a wooden fence with your own hands is the dream of any summer resident. With the advent of new materials for the construction of fences: corrugated board, polycarbonate, reinforced concrete, wood products gradually began to fade into the background. However, over time, the owners of suburban areas realized that nothing can replace them in terms of beauty and environmental friendliness. In addition, improvised materials can also be used in the construction of this element. So you get a wonderful wooden fence, the price of which will be significantly lower than similar products from artificial materials. Wooden fences are divided into several categories, the construction methods of which we will now consider.

Wooden fence do-it-yourself: classic version

For the construction of such an element, it is necessary to concrete the support pipes into the ground along the perimeter of the site. Between them, fix the runs made of timber. Fence boards should be nailed perpendicular to these elements at a slight distance from each other. Often the concept of "wooden fence" is associated with the usual picket fence. This design looks best with brick columns that act as supports.

How to create a wooden fence with your own hands: the "Cross" option

This type of fencing involves a combination wooden planks with reinforced concrete elements. Decorative columns are installed on the support columns. concrete plates and crossed with wooden bars. Both the main canvas and the pillars are tightly closed with decorative caps to prevent moisture from entering the structure. Such a wooden fence, a photo of which can be seen on the pages of specialized publications, looks monumental and very impressive. It fits perfectly into the classic landscape design site and become its decoration.

How to make a lattice fence

In this case, finished gratings made of wooden slats are laid between the supporting pillars. They can be placed both parallel to the supports and diagonally. This fence is purely decorative.

We make a wooden fence with our own hands: "herringbone" or "ladder"

To erect such a fence, support poles should be installed, then decorative poles should be fixed on their outer and inner sides. wooden lining. They will serve as guides for the fence boards, which should be laid horizontally in the gaps between them. If desired, you can use vertical metal rods that will give your design original look. Support posts after completion of work should be closed with decorative covers.

Another interesting fence: "Palisade"

To create such a fence, you should pick up smooth, small-diameter logs and install them along the perimeter of the selected area in a vertical position. As a support for this type of fence, columns made of stone or brick or metal rods dug into the ground can act.

Summary

As you can see, building a wooden fence with your own hands is not difficult at all. You just need to decide on the type of construction, stock up necessary materials and show some patience. Magnificent fencing natural wood will delight you with long views with its pleasant appearance. The main thing is not to forget to process the design from time to time protective equipment which will prolong its service life.

Recent years of fashion wooden buildings leads to the fact that more and more developers think that metal fence maybe not the most best solution. In terms of durability, maybe yes, but in terms of aesthetics, it is inferior to wood. The wooden fence has somewhat lost its popularity due to its short life: wood, with constant exposure to the sun and water, quickly collapses. To increase service life, protective covering in the form of paint has to be constantly updated. With a large length, it takes a lot of time and requires a considerable amount of paint. This problem has become less acute, as the emerging Lately new antiseptics allow you to extend the life of the fence, and also guarantee the durability of staining for several years. The term is different - from 2-3 years, to 5-7. It depends on the type of antiseptic impregnation and the manufacturer, but finding "long-playing" ones is not difficult: in any more or less large store.

Moreover, these impregnations do not paint over the texture of the tree: all the veins are visible. They just change color, usually to a darker one. Such a fence made of wood looks solid and rich. Even a simple picket fence, and even a difficult one, even more so.

What is important is that you can put up a wooden fence with your own hands alone, if necessary, even without the involvement of assistants. Another important thing: a significant part of the work - the preparation of wood - can be carried out not on the spot, but, say, in a garage or workshop. And start it long before the start of construction. For example, from autumn to spring, and the construction itself should be started already when the weather is warm.

Wood is a very plastic material and the simplest thing can be done so that it looks like a work of art. This is true for fences as well. If you wish, you can make such a “candy”, which is a pleasure to look at. There are several designs of wooden fences.

Fence

The simplest is the picket fence. This is a set of edged boards or strips of the same, as a rule, width, which are nailed vertically to two or more transverse rails.

Scheme of a wooden fence made of vertically nailed boards - picket fence

The shape of the top may differ. A 90° floor cut is the easiest option, but far from the best, and not only in terms of aesthetics. The top of such a fence, even painted, is exposed to intense moisture, as a result, the coating in this place is destroyed first. And the wood pores in the perpendicular cut remain open. Rain, fog, melting snow / ice are absorbed by them, which leads to the destruction of wood. To avoid this, cut the tops not at 90 degrees, but at 45 degrees. If you look at such a board in profile, then the top will be beveled (see the figure below).

The distance between two adjacent fences is chosen according to your desire. You can make a solid fence, fitting one close to the other, you can make it translucent, leaving a gap of 1-2 cm, or you can make it completely transparent - with a large distance equal to the width of the boards or even more. Such options are popular for internal fences, which are more designed to separate zones and mark boundaries than to protect from something. For outdoor fences facing the street, they usually choose a solid installation, maybe with a very small distance so that the boards do not “swell” in wet weather.

Sawn tops add variety. They can be sharpened in different ways - with a rounded top, in the form of peaks, triangles, trapezoids. All this in different options and combinations.

Rounded top - the most popular This is more of an openwork fence, but decorative - for sure Tops in the form of lilies - the fence will be beautiful Peaks and triangles - in combination and independently

Some even make truly works of art: a carved fence requires a lot of perseverance. The work is painstaking, but the result is worth it.

Carved fence slats - beauty Beauty - carved wooden fence

Make curly tops faster and easier with a template. Cut out a sample from a sheet of plywood, bring it to perfect condition. Then cut out all the rest according to this pattern. You can cut with a jigsaw or on a milling machine.

A jigsaw for such a case can be bought. All the same, even taking into account this expense item, it will turn out cheaper than buying ready-made carved pickets. The downside here is that it takes a lot of time, and the pickets turn out to be unequal: either the file will go a little to the right, then a little to the left. The edges then still have to be processed with sandpaper.

Buying a milling machine, if you don’t plan to use it later, is unprofitable. And those who already have one can buy cutters with a floating head and make a figured picket fence with it. The height of the cutting part of the cutter is equal to the thickness of the board that you will be processing, and the head rests against the template.

In both cases, you will have to somehow fix the template on the workpiece. This can be done with thin nails or by sticking double-sided tape on the template.

But if you approach the process creatively, then even from even thin planks you can make a beautiful wooden fence: nailing it at different angles.

Even easier made the authors of this wooden picket fence: they only made the height non-linear, emphasizing the relief with a bar nailed on top. This, by the way, is the second way to significantly increase the life of a wooden fence - the plank blocks access for water to the most vulnerable open cross sections). Also, non-linearity is given by planks nailed to the surface in the form of frames, and the wood inside is painted in a more light color. Agree, original.

Wooden fence "checkerboard" or "chess"

In fact, this is one of the subspecies of the picket fence. The boards are stuffed alternately on one side, then on the other side of the crossbar. It turns out an interesting three-dimensional view.

The principle of installing shtaketin in the fence "checkerboard" or "chess"

If you look at such a fence exactly opposite, it looks like a deaf one, if to the side, then at a certain angle some part of the yard will be visible through the gap. The degree of transparency is regulated by the entry of one bar after another. You can make it so that the visibility will be zero. For example, with a plank width of 10 cm, make the distance between them no more than 6 cm. Here, no matter how you look, nothing is visible. The disadvantage is the high consumption of wood. But the fences are very beautiful, especially in combination with brick or stone pillars and figuratively made tops.

Checkerboard on the plinth - such a fence looks gorgeous

They make horizontal fences from chessboards. But here you need to keep in mind that it is very convenient to climb on such a fence: boards are like steps. True, any fence is not such a serious obstacle. Rather, it is a protection from prying eyes than from serious assassination attempts.

Wooden fence - horizontal checkerboard

Such "chess" looks decent and solid. Pillars can be anything: metal, wood, stone, concrete. If they put metal poles, they are made from a profile thick wall pipe(3 mm). Above ground level, from the front and back, they are sewn up with boards (to the pillars with bolts or self-tapping screws), which are larger than the width of the profile: they should protrude on the sides by 3-6 cm. Thus, we get guides into which the boards are inserted. The boards are then fastened from the inside to the sheathing of the pillars.

Fence "Herringbone"

Another type of horizontal fence is called a herringbone. It is named so because the boards are stacked close to one another, and with an overlap on the one below. In profile, it looks like a Christmas tree, as children draw it.

Wooden fences "herringbone" create a continuous covering

It is more difficult to climb up such a fence. Please note that there is a protective visor on top. It protects the most vulnerable part of the fence, greatly extending its life, as well as pushing back the time for the next painting. After all, usually the top and bottom of the coating is the most damaged. From below, this fence is protected by a plinth, from above - by a visor.

Wooden fences "blinds"

They differ from those described above in that the boards do not adjoin one another. They are fixed at an angle, but with some clearance. This type of fence does not create a solid wall and the yard can be viewed, although this will require you to sit down or even lie down - depending on the angle of inclination.

A fence called "blinds" - looking at its device, you will understand why

This type of fence is very uneconomical - wood consumption is usually high. The assembly is also difficult: fasten a bar (corner) under each board or cut a notch in the post.

But with this construction, good ventilation of the site is ensured. This is important if the climate or terrain is humid. You can’t install a solid fence: there will be a puddle under it and the dirt in the yard will never dry out.

Wicker from the board - a beautiful fence

The fence made of boards bent between the pillars looks unusual. They are intertwined between the pillars like a traditional wattle fence. They only make it from long boards.

Fence "braid" from the board

Most often they are found in a horizontal version. There are fewer joints and bending long spans is easier.

There are also vertical braids. To give them a finished look, planks are nailed at the top and bottom - they both hold the edges of the boards and protect them from bad weather.

How to make such beauty, see the video. It's really easy, but it takes a lot of strength.

lattice fences

A wide variety of gratings are made from thin, and not very, planks: with different angle, the frequency of the planks, etc. These fences play a rather decorative role and are used either for indoor fencing - the waters of the thief, in the garden - or for the main entrance - to mark the borders, but not cover the beauty.

Fence from wooden planks lattice "in a cage" Lattice fence made of boards - looks serious Double planks - such a lattice fence looks interesting

Photo of beautiful fences

You just wonder what beauty people can make from a piece of wood. Really beautiful. And some, while not very complex.

Maybe someone will be inspired by these photos of old wooden fences, they can be repeated ...

Disappearing beauty...

Do-it-yourself wooden fence: Wood has been and remains a popular material in construction. Owners of private houses use wood for the construction of gazebos, awnings, summer kitchens and other structures. The environmental friendliness of this material, excellent processing ductility and sufficient service life make it easy to build a wooden fence with your own hands. The forms of modern wooden fences have a decent appearance and perfectly complement the exterior of the home.

Fences made of wood with their own hands. Photos of current options

Wooden fences framing the territory of personal plots can have various shapes. For their construction, timber, edged and unedged boards, logs, planks, as well as twigs and tree branches are used. Fencing can be made solid or with gaps, with elements arranged vertically, horizontally, at an angle, in one or two rows, with even and wavy edges, as well as with inserts of various patterns.

Stylish wooden fence decorated with climbing plants

The most popular are such options for do-it-yourself wooden fences, photos of which clearly illustrate their design:

• "Ladder" or "Herringbone" - this type of fencing is characterized by the location of horizontal boards between the supports at a certain angle and overlap. Outwardly, this design resembles blinds: the space behind the fence is not visible, and oblique gaps let in air and light;
• "Chess" - a fence in which vertical elements are laid in two rows, shifting them in a checkerboard pattern. In this fence, both sides are front. The fence securely covers the yard from prying eyes and at the same time has gaps that are visible only at a certain angle;

Solid fencing made from edged board

• "Fence" - a traditional type of fence, where vertical strips are attached to the rails with a certain step. To give the fence an attractive look, you can use the design top edge fence in the form of a wave or zigzag. Popularity is due to ease of installation and cost-effectiveness;
• "Grate" - the original type of fencing, consisting of wooden frames, inside of which there is a lattice of slats. Such a fence can be made in one or two rows with a different pattern of crossing planks. It has a light and openwork appearance, is used as decorative type fences;

Variety of wooden fences

• "Pletenka" - original design fence, obtained by horizontal or vertical interlacing of boards. Building a wicker fence with your own hands is not difficult, the cost of it is small, and the appearance is quite decent. Wicker hedges made of branches or twigs have come into fashion, mainly used for decorative framing of small summer cottages.

This is not a complete list of wooden fences. Many fences are made by combining a picket fence and a lattice in one design, or combine wood with metal, stone, brick and other materials. You can get an original and inexpensive design by building a fence from unedged board with your own hands. Photos of such structures illustrate the individuality and ingenuity of their manufacturers.

Traditional fencing painted in a bright color

In order for the construction of a self-installed wooden picket fence or other type of fence to be strong and durable, you should follow some recommendations:

• support posts must be mounted using special shoes to expand the support area, which will ensure structural rigidity;
• vertical racks should be placed in increments of 2.5-3 m;

Construction examples wooden fences, their mounting dimensions

• the vertical and horizontal of the mounted fencing elements must be checked with a building level;
• wood treatment with antiseptic compounds must be carried out before the installation of the fence. When the structure is assembled, some places will become inaccessible for processing, and therefore vulnerable to pests;
• wooden fencing should be protected from the effects of atmospheric precipitation and sun rays. Remember to color wooden surface necessary after thorough drying of the material;

The original fence around the territory country house

• it is not recommended to use oil paints and varnishes for painting wooden fences: under the influence natural factors such a coating peels off and crumbles;
• for fixing the elements, it is desirable to use fasteners with a galvanized coating, which are little susceptible to corrosion;
• make sure that when using self-tapping screws and nails, they do not damage the structure of the tree.

By adhering to these recommendations, you can avoid common mistakes when installing a wooden fence in the country with your own hands. Photo self erection wooden fences, in large numbers found in the network, demonstrate the various stages of work.

Decorative wooden fence decorating the garden

Wicker fence with your own hands. Photo of fences in a rustic style

Recently, do-it-yourself decorative wooden fences have become popular. Photos of such fences show that their main purpose is not protection, but a symbolic stylized frame and decoration. personal plot or a small area of ​​it. Quite easy to build wicker fences. Having studied step by step instructions, you can find out how a wicker fence is made with your own hands.

Wicker wicker fence looks unusual and original

Types of wicker fences

Depending on the height, weaving method and purpose, wicker fences can be divided into several groups:

• up to 1 m high - low fences with horizontal weaving. They are installed for framing. flower beds, large tree trunks, wells, as well as to mark paths;
• height from 1 m to 1.5 m - horizontal or vertical weaving is used in such a fence. They serve to delimit the territory into separate zones, for example, with their help, you can separate the recreation area from the vegetable beds or allocate the space of the garden;

A horizontal weave hedge frames a flower bed

• up to 2 m high - can serve as protective fence and are installed along the outer perimeter of the infield. Both horizontal and vertical weaving can also be applied here.

Useful advice! To make the wattle last as long as possible, choose hazel or vine for its manufacture. Such a fence will stand for more than 10 years.

Careful processing of raw materials with an antiseptic solution will help to extend the life of a do-it-yourself wicker fence made from branches.

Types of trees for weaving a vine fence

Preparation of materials and tools

To build a wicker fence with your own hands, you will need:

• metal or wooden stakes;
• stalks of willow vine;
• sledgehammer;
• secateurs, knife, wire.

The rods are harvested in spring or autumn, choosing the straightest possible branches. After harvesting, the shoots must be dried and collected in bundles for storage. Before installing a fence (15 minutes before weaving), to give flexibility to the rods, they are thoroughly soaked or steamed. After laying, the woven branches dry out and acquire a solid structure.

Strawberry bushes planted in a flower bed with a fence made of twigs

Wooden or metal stakes are prepared for the frame. So that the supports installed in the ground do not rot, a trench is prepared along the perimeter of the future fence and its bottom is covered with sand. Due to this, moisture will drain and quickly pass through the sandy base into the ground.

Useful advice! To give the structure of the wicker fence strength, it is recommended to deepen the support stakes by at least 0.5 m.

For the frame of a wicker fence, it is necessary to prepare wooden or metal stakes

Frame construction and fence weaving

The frame of the fence is arranged from stakes located at a distance of 50 cm from each other. It is this distance that will contribute to the convenient weaving of the vine. At the end of the fence line, installation wooden poles for the fence is carried out with a smaller step. This allows you to qualitatively fix the ends of the braided rods. If the future structure will have a height of more than 1 m, metal rods are used instead of wooden stakes. They are pre-painted in a color that imitates wood. Such a frame will be more rigid, as well as more resistant to the effects of a moist environment in the soil.

Vertical bar fencing

If horizontal weaving is selected, it starts from the bottom row and ends at the top. The supporting pillars are wrapped around with a vine in the form of a "figure eight". In order for the fence not to warp, it is necessary to nail the upper ends of the wooden supports to a flat bar, which is removed before weaving last row. To give the fence an aesthetic look, you need to make sure that the ends of the branches are located on the back side of the fence.

Various ways of weaving a hedge from a vine

In order for the fence made of rods to be strong, it is necessary to tie the ends of the rods together with wire. The protruding ends are cut off with a knife or secateurs, and the remaining parts of the rods of the last row are tucked along support pillars. For more natural look hedges use rods of various lengths, thereby masking the joints.

Fencing in rustic style made from rods

Do-it-yourself fence device from boards: photo, construction stages

You can build a wooden fence with your own hands using a board with a section size of 15x2.5 cm. The length of the board is selected depending on the height of the planned fence. Traditionally, fences are installed with a height of 1.5 to 2.5 m.

Preparatory work

The first step is to mark the fence line. To do this, small (50-60 cm) stakes are hammered along the entire perimeter of the personal plot in increments of about 2 m. A construction cord is pulled between the pegs. When tying the stakes, it is necessary to ensure that the cord is sufficiently taut and does not sag. Then it will be necessary to prepare boards of the desired length.

Modern view of the wooden fence

Boards can be cut by yourself or ordered finished material required length. All boards are sanded on a machine or using a sanding attachment on a drill. The ends of the boards can be left straight or cut into a semicircle or triangle. By processing an unedged board with your own hands, you can significantly save the cost of building a fence. For supports prepare wooden beam with a section size of 75x75 mm, 50x50 mm. The number of bars is calculated based on the total perimeter of the site. For guides, boards with a section of 10x2.5 cm are used.

Solid type of fencing with a horizontal arrangement of boards

How to install fence posts

Before installing the support pillars, you need to drill holes to a depth of 0.5-1 m in those places where the stakes are dug. Pits are arranged using a drill (manual or electric). For vertical racks, a bar with a section of 75x75 mm is used. Before installing the supports, it is necessary to well process that part of the beam that will be in the ground. Processing is carried out by keeping lower parts wooden poles in antiseptic impregnation within 48 hours. After that, the poles must be dried well.

Scheme of the device of a wooden fence

Extra protect wooden rack from decay is possible by concreting. The bottom of the pit is covered with a small (1/3 of the depth) layer of sand and gravel, watered, a beam is installed and poured concrete mortar. While the concrete has not set, the support is slightly raised to allow the mortar to penetrate under the base of the rack. Further, with the help of a plumb line or level, the timber is set vertically. In order to make sure that the height of all vertical supports is the same, it is necessary to hammer a nail into the upper end of each beam and pull the cord tightly between them. The resulting line will show how correctly the height of all supports is selected. For complete drying of each support, at least three days are allotted.

Unusual wooden fence in the courtyard of a private house

Board fence device

When all vertical supports are installed and aligned, proceed with the installation of horizontal rails. They are usually placed 25-30 cm above ground level and distributed at an equidistant distance from each other. For fixing, nails are used, the length of which will allow to pierce the timber and the board right through and at the same time 1.5-2 cm will protrude from the back side. These protruding tips are carefully bent along the wooden plane.

Do-it-yourself installation of a fence from an edged board

Next, proceed to the boarding. For fastening use nails or screws. According to your desire, you can fasten the boards close to each other or leave some gap. As soon as the fence is finally assembled, the tree is covered with drying oil, allowed to dry well and painted with a composition that is resistant to impact. environment.

Wooden fence "Herringbone"

Very popular and aesthetic wooden fence "Herringbone". To independently assemble such a structure, you will also need to mark the perimeter line and install vertical supports as described above.

Combined fence made of wood and stone. The boards are arranged in a herringbone pattern

The main feature of the horizontal fences "Herringbone" is the location of the boards at an angle and overlap. To achieve such an arrangement, it is necessary to fix wooden linings (in the form of steps) to the vertical pillars or use a channel into which you can easily insert a board at a slight slope. In addition, the boards can be placed not only horizontally, but also vertically at an angle. Filling the frame of a horizontal fence starts from the bottom row. The board is attached to uprights and guide beams. Next, the next row of boards is overlapped.

Useful advice! To obtain a fence with small gaps, as well as to ensure ventilation, gasket material is laid between the boards.

An example of a fencing "Herringbone" horizontal type

The end edges of the boards must be carefully aligned. So, row by row is installed and the edges are aligned after each run. Before fastening, it is necessary to process the boards protective compounds and apply a double coat of paint.

Features of the fence "Chess"

The wooden fencing "Chessboard" due to the fact that the boards are attached from the front and the inside, has a more attractive appearance. Such a fence can also be laid in a horizontal or vertical direction. The position of the guide beams also depends on this. The distance between the boards is chosen independently and the fence can have small gaps or be solid.

In the "Chessboard" fence, small gaps are allowed between the boards, or the fence can be solid

After installing all the vertical supports, the guide beams are fixed. For ease of installation in the support pillars arrange grooves for the crossbars. If metal supports are used, corners are welded to them, on which beams are placed. To get the exact checkerboard arrangement of the boards, you must first outline the attachment points for each board. This marking will allow you to get the perfect filling of the fence section, eliminating the possibility of the formation of various gaps between the boards.

This type of fencing can be performed in a horizontal or vertical direction.

A chess fence made of horizontally or vertically laid unedged boards looks quite original. Following the simple recommendations and advice of experts, you can assemble a beautiful and strong fence made of wood, which will serve as a fence for more than 10-15 years.

Wooden fence "Herringbone" is the choice of people who value beauty and functionality. The barrier fabric is assembled from horizontally arranged boards, each of which is fixed at an angle and slightly overhangs the previous one. This installation technology contributes to the natural removal of moisture - rainwater flows from the surface of the boards without getting inside the structure. At the same time, ample opportunities for finishing allow you to decorate the fence in full accordance with the taste of the owner. For example, it can be painted, covered with a glazing composition, varnished, while maintaining the natural color and natural pattern of wood. Successfully combining high strength and attractive appearance, Herringbone fences not only protect the backyard from unwanted penetration, but also serve as a real decoration of the site.

Advantages of a wooden fence "Herringbone"

• Reliability The design of the fence is such that it is very difficult to climb on it. This provides additional protection of the site from the penetration of thieves and hooligans.
• Respectability Boards laid with an overlap, forming a fence canvas, create the effect of volume. Due to this, the fence looks not only aesthetically pleasing, but also truly rich.
• Durability Installation is carried out in such a way as to minimize the aggressive effects of moisture. Combined with the use protective impregnations this significantly extends the life of the fence.
• Environmental friendliness Having natural origin, the tree does not pose a danger to either the environment or humans. At the same time, it harmoniously fits into the countryside landscape.

Materials and components for construction
fence "Herringbone"

• Board
• Color palette

Planed with a thickness of 18 to 25 mm and a width of 90 to 200 mm.
It is used for the manufacture of all types of fence: wickerwork, chess, palisade, ranch, herringbone, picket fence

Carpentry with a thickness of 20 to 40 mm and a width of 100 to 300 mm.
Used to make decorative fences in the style of "Russian fairy tale" and other epic fences. To emphasize the wild primitiveness. We recommend that you do not plan or grind, but simply apply impregnations.

The cost of the fence "Herringbone"

When ordering a fence for suburban area, a country house or any other object, it is important to understand what the cost of the structure consists of. First of all, the final figure in the bill is affected by the type of materials, the brand of fittings, the method of installation, the length and height of the fence. Another important factor is the complexity of the project. For example, the Herringbone fence can be mounted both on wooden and on brick pillars. In the second case, the cost of construction will be higher. That is why we recommend that you clarify the amount with managers after agreeing on all the details of the project.

Protect your fence from rot and corrosion!

Mounting order

• 01 Perimeter marking

  Curvature and other installation defects reduce not only the attractiveness, but also the functionality of the fence. That is why it is so important to correctly mark the site on initial stage works. To do this, use wooden pegs, twine or rope, tape measure. The markings start from the corners, and then the perimeter pegs are installed along the twine.

• 02 Installation of supports

  First, install the corner posts, as well as gates and gates. Next, mount the remaining supports. The distance between them is determined by the length of the board from which the fence is assembled. Usually the step is 2.5 meters. Reducing this distance leads to a decrease in the aesthetic qualities of the fence, an increase adversely affects the strength.

• 03 Mounting methods

  To ensure the wind resistance of the fence, the installation depth of the posts should not be less than 1.2 meters. The support is installed in a pre-drilled pit, leveled vertically with the help of a level and either concreted or covered with fine gravel. There is another technology - clogging. However, it is only suitable for metal poles.

• 04 Mounting the planks

  At an equal distance between the supporting pillars perform vertical installation two wooden planks. In cases where the step between the supports exceeds 2.5 meters, it is recommended to use at least three lags. The installation of intermediate support elements is also carried out according to the level with the obligatory control of verticality.

• 05 Web assembly

  The installation of horizontal boards forming the fence canvas starts from the bottom. Each element is attached to the supporting pillars and intermediate lags with the help of self-tapping screws. The boards are mounted at a slight angle to the center line with an overlap on the previously fixed structural element. A visor is installed on top of the fence.

• 06 Arrangement of the entrance

  At the final stage of installation, the support pillars are strengthened with the help of jibs. The need to use additional fasteners is due to the fact that the moving elements account for the greatest load during the operation of the fence. After strengthening, the frame of the gate and the gate is hung on poles and sheathed with a board.

Scheme of installation of wooden gates

Scheme of installing a wooden gate

Decorative arc on a wooden gate

Decorative arc on a wooden gate

Why is it worth ordering a fence in our company?

• High quality Impressive experience in the field of production and installation of barriers, as well as the use the best materials, allows you to guarantee the quality of all designs.
• 2-year warranty Carrying out a full cycle of production and installation, we are confident in the reliability and long term fence services, so we provide a guarantee for all products of the company.
• Affordable prices By purchasing materials and accessories in bulk, we have reduced the cost of fences. In combination with a loyal pricing policy, this provides our customers with comfortable ordering conditions.
• stable cost At the initial stage of cooperation, we draw up an estimate and agree on the cost of the project with the client. Once approved, the amount is fixed and remains unchanged.
• Own delivery Our company includes a transport department, which delivers materials, equipment and installers to facilities in Moscow and the region.
• Convenience of payment We make sure that cooperation is as comfortable as possible for customers, so we have provided for the possibility of paying both in cash and by bank card.
• Departure of the manager Upon a call, our specialist will arrive at the site and draw up a contract. Departure of the manager allows you to do without a tedious trip to the office and saves time and effort.
• We do thoughtfully and responsibly.
  Quickly, yet carefully
  smooth, nice.

By ordering the fence "Herringbone" you will receive

When ordering the construction and installation of the Herringbone fence in our company, you will receive a warranty certificate, which will confirm not only the quality of the work performed, but also our legal responsibility. Therefore, we will provide you with post-warranty maintenance of the installed fence for two years.

Order the construction of a fence from with a guarantee of 2 years