Wooden shoulders with their own hands. Racks for clothing outdoor: description, varieties, advantages. Is it possible to make a rack hanger with your own hands? Pros and cons of outdoor hangers

Racks for casual wear have become very popular. It is not surprising, because first of all such hangers are comfortable. First, the clothes rack perfectly temporarily replaces the closet, if the circumstances have been so far and you remained without it. Secondly, on the rack you can store domestic and casual clothes, planning your wardrobe in advance the next day. Depending on the design, it can be placed in it for sorting dirty clothes, shelves for shoes and many other utilities.

Of course, such a wardrobe is not suitable for everyone, because the clothes will be covered with dust, and if there are pets in the house, and wool. Therefore, we suggest to consider options like a dressing room from racks-hangers for clothes and racks for storing clothes for the day.

The first option is very simple - threw hangers on the cornice and everything is ready. But it is worth considering one nuance - on the sunny side, this number will not roll, because The risk of spoil clothes.

Or here is a more complex version of the rack, in this case the suspension. It is convenient that such a hanger can be made exactly the size you need.

Hanger with hooks for clothes - a win-win version, but only for things that will not be pulled out in such a position. Although, you can use the shoulders.

You can make such an outdoor wardrobe for clothes and shoes from the old bullfirera. You can make a rack yourself, and then it is artificially creating.

Wardrobe and rack for clothing at the same time. Intrun the curtain with a small space, the owner of the housing and the place for storing clothes and a corner where you can change clothes.

And such a hanger for ties, baseball caps and other little things can be made with your own hands. Stylish and convenient - everything is in one place!

Unpainted clothes hanger from undergraduate metabies, in this case from the branch:

Original solution - Rack for clothes from pipes. In this photo of the pipe copper, it gives special aestheticism of the design:

Space decoration creates a more cozy and organized residential premises. After the entrance door, the hallway can be called the first part of the apartment, which a man sees when returning home. This is the interior that presents the whole house. But too often an entrance hall becomes a "highway", where coats and shoes are discharged. But how beautiful when it is room, with love, decorated with your own hands!

People have a lot of excuses in order not to equip the entrance group. For example, they say that the room is small or narrow. But in this case, the more you need to develop furniture on individual sizes, and it is not necessary to order its production to those skilled in the art. With the creation of some designs, even women will be easy! There are many unique ways to make furniture items with their own hands so as to save time and money, just most people are not often thinking about them.

Trone or tree? Choose!

Incredible tree

By and large, the apartment should begin with a hanger, this item can be exclusive, made according to individual intent. As you know, hangers may look different. There are many designs from various materials, different colors, styles and sizes. Some of them are hiding behind the mirror in the closet, others hang on the wall, and the third stands on the floor. Outdoor hangers are beneficial to the fact that they can be easily moved, they occupy very little space.

Floor hangers in the form of birch are ideally suited for modern interior finishes. And you can make them from real thick branches. The new stand will bring unique accents and romantic feelings in the hall or hallway, decorate children's rooms in playful, interesting style, will become a certain divine island of nature.

Of course, the furniture in the form of a tree will be loved in the house. Our ancestors deified the trees that occupied not the last place in the rituals. Today there are oaks that lived more than one century, they are also considered special.

Outdoor hanger rack, repeating natural shapes, looks impressive, its design is ideal for small rooms. Elegant natural forms can be cut out of plywood.

Plywood consists of three or thinner layers of wood connected along with glue. Each layer is usually focused, it passes at a right angle in relation to the neighboring layer to reduce the shrinkage and improve the strength of the finished product. Parts of plywood can be formed in complex curves for use in the production of beautiful natural design:

A sketch is drawn before purchasing materials. After that, sizes are calculated.
Mastery in trifles - I need to saw, laying out plywood sheets on a completely even plane.
In order to protect the material from chips, the line on which sheets will be cut, sculpt the PVA glue.
The finished product is covered with varnish or paint.

And even the king will envy!

It is also interesting to design created by your own hands in the form of a chair. When it is produced, you can use boards. The original handmade furniture looks like a royal throne, in combination with any type of decoration, it will become not only a functional addition to the house, but also the central element of the hallway.

The design of such a chair is very simple for any person engaged in carpentry work. The most interesting, useful detail of this model is a square mirror, without which there is no one room at the entrance, it makes the furniture richer. The durable model has 5 hooks, children can get up to the chair to remove or hang their coat. The main condition is stability, it must be checked after the manufacture.

Three brilliant ideas

The idea of \u200b\u200bAlicia Prussakovskaya

Knowing that the most important detail of the tempting, beautiful hallway design or hall is a comfortable storage desk with a bench or a unique hanger, Krakow designer has developed outdoor furniture with a place to store shoes on which you can sit down. A separate item intended for flexible use in the corridor resembles a white box with a collection of thin wooden skis. It would probably look like a skis sticking out of the snow if the athletes turned over, making a known, and fell into a snowdrift. Curved hooks at the ends of pine boards are located at different heights to hang coats and accessories.

Ergonomic forms, roundings and bends in the plan emphasize the beauty, the nobility of the model. Place for storing shoes, playing the role of seating, made of four sections of white lacquered fibreboard of medium density (MDF) fiberboard bonded from pine details. Hook elements are formed from pine boards.

When working, traditional wood processing methods were used, for example, garbage hooks were cut off manually, with a chisel. "My goal was to design an object that would be useful and visually attractive," the designer shares his idea. Holes designed to install pine boards are decorated with wood hoops.

The idea of \u200b\u200bGerman designers

Christine Gerold and Katharina Ganz developed outdoor furniture with unique hooks resembling birds, resting on power lines. Such a model will increasingly decorate any entrance hall. Hooks for clothing are picturesquely located on a metal guide, and directed up at an angle of 45 degrees. The legs of the furniture are made of birch, the metal pipe of the circular section is neatly inserted between them, which looks very elegant, it really resembles the electrical wire.

Removable fittings for clothing allow you to hang on them upper clothes on both sides, similar forms can also be used to store hats, umbrellas and bags.

In the same principle, but using other materials and decor, many unique models can be developed. For example, make a wooden design of 6 boards and 3-wooden sticks, round in diameter. Such furniture, 70 cm high, convenient to collect and disassemble, it will look good in the children's room.

Idea from Japan

Japanese designer Yasu Mifuna created a design from a steel rod curved back and forth and attached to a circular base. As a result, there are three horizontal stripes. The stand is compact, it does not take place at all. Flat wrappers from plywood neatly fit on the base of furniture when they are not required, and held with a short rod.

"Sometimes there are situations when furniture for clothes is not particularly needed, for example, if you need to hang only a scarf," says designer. This floor hanger is ideal for summer clothes and decorates the room.

From nothing - something

Do not rush to throw out the old door

Do not hurry to take the old one, but a strong door, if it had to be changed on a modern model. After all, you can make a gorgeous hanger for a country house in the style of Provence!

For the main design, there will be conventional boxes, 5-6 beautiful and reliable hooks for clothing, 2 parts from thick plywood and 2 decorative metal bracket. After assembly, the hanger is worth painting using crane techniques. Boxes that will play the role of the shelves for shoes and at the same time serve a bench (you can sit on it to go), you should decorate with decorative pillows.

How to make furniture for half an hour

In the production of its own hands stylish, comfortable furniture for clothing, you can use fittings for water pipes, connecting parts from wood or directly pipes. Multiple schemes create multiple structures.

Copper details of furniture made by their own hands look both vintage and very modern - it is still a beautiful home design trend. Details made of metal, appreciated by centuries, decorate space, make it elegant, stylish. Using copper plumbing accessories and wooden chopsticks, bought in a shopping store, you can create a chic hanger in just half an hour.

Purchase materials. The inner diameter of copper adapters must coincide with the diameter of wooden sticks.
Cut sticks. 2 pieces-1300 mm, 2 pieces-800 mm, 4 pieces-200 mm, 6 pieces-100 mm.
Connect sticks with copper details.
If the design is sustainable, the parts are fastened with glue.
Using universal drawings, racks can be projected to any size.

When the furniture is made with their own hands from metal pipes, you need to take into account that it will be sufficiently heavy. To easily move it easily, it is worth using wheels.

Applying a wooden box, the design is easy to complement the place for shoes.

One of the most interesting ideas of creating furniture from unusual materials is the use of pallets in its production. Pallets are extraordinary in the sense that you can make absolutely any furniture from them. If the apartment is overloaded with things, and a person faces certain problems, the production of places for storage of things from pallets will be a great help. Pallets turn ordinary apartment into fashionable and stylish space, which are decorated with unusual models, including those intended to hang bags, hats, scarves and more.

The special character of such furniture will give hooks for clothes, they are just as selected to the clothes of buttons, form the whole style.

This project can be made with your own hands with pretty simple tools:

pencil
pallets
hand saw
nails
a hammer
measuring tape
nail-holder
sandpaper
level

Brushes, paints and varnishes will be useful in order to make a hanger for clothes with their own hands even more unusual. Add an interesting color that will change the hallway or foyer is a wonderful idea. After the furniture is made, its surface is prepared and polished, paint can be used by any shades, in accordance with the individual taste and the rest of the decor. You can also apply the remains of the paints that the walls of the house painted. Enamel is applied in several layers.

Relieved hanger with her own hands - the idea is fruitful. The theater begins with hangers; House too. In the sense of spirit, atmosphere, "energy". The reason is simple: the first thing that looks out the guest - where to hang up the upper clothes. And if the hanger is clearly self-made, but convenient, stable and durable, positive renome owner is provided.

The second argument for making a hanger with your own hands, is prosecated: purchased prices are clearly disproportionate with production costs. A homemade clothes hanger will save quite visible in the budget amount. It is easy to make it, the material will take a bit, go into business and waste from repair. In most cases, you can do the tool.

These factors are especially felt, if the floor hanger is placed in the hallway. In addition, it can be a dryer, if its frame design, see further, because On such hangers, clothing is comfortable to hang on her shoulders, and the hanger moves away from the wall. If the house managed to fade, then the outdoor hanger is the best option. The cost of floor hangers is significantly higher than wall mounted, but there is nothing in the design, which would not allow to make an outdoor hanger on their own.

On the floor or on the wall?

The said is already enough to make a choice, just if the floor area was enough. However, the approach is completely attractive than an attractive hanger in a floor-type hallway:

Clothes raving on her shoulders will dry faster, not stretching; The collar and lining do not rush.
On a hanger width approx. 1.5 m is placed a seasonal set of clothing of the whole family, which will save on the closet and square under it.
The blatus is naturally attached to the outdoor hanger, which simplifies the work on the equipment of the hallway and saves its area.
With properly calculated sizes of the hanger, neither the wall from the clothes or clothes about the wall is not damaged.
The mobility of the hanger does not prevent the rearrangement of furniture; After moving the hangers, you do not need to close the mounting holes in the wall.

However, outdoor hangers are different, and not all of them are most suitable for residential premises. For example, to orders (from Star. Russian. "Order" - office, office, office) Hanger-lands, pos. 1-4 in Fig., Wash clothes on the shoulders are inconvenient. Because of the small area of \u200b\u200bthe support, they are twisted, especially loaded with winter wet clothing. To emphasize the functional damage to the product, such hangers call the lishes, and they often go to this name.

The best option is the same theatrical dressing frame hanger, pos. five. Performed for residential premises it is complemented by shelves for hats, shoes and gloves / scarves; Perhaps an additional barbell for ties, pos. 6. The lack of "legs" of the hangers are confused under their feet. In trying to get rid of it came up with hangers - frames on the stand, pos. 7, but generally speaking, they roll even more than ordinarians hung. Another option is a hanger frame without legs, leaning against the wall; We still remember this. There are still frame hangers of a folding structure, but in everyday life they have almost no advantages.

If in the hallway with a place in general tight, then more suitable is still a wall hanger. Simple wall hanger-scab, pos. 1 in fig., Maximum compact, but it is not more convenient as possible, except that the next jacket does not fall from the next jacket. Hanger-shelf, pos. 2, it will not fall, if attached as it should, and hats / caps from it, too, but the wall and clothing rub each other.

Wall hanger-panel, pos. 3, saves the wall, but not clothes. Most of all replete leather things on such hangers. Kozhevniki in a joke advise: how, they say, distinguish a sheep of face leather from her the knuckles? The first on everyday use the hanger-panel loses the view of 2 winter, and the second is for clauses. Given the cost of products from genuine leather, it is not good anywhere. Therefore, the hanger-panel on the wall for expensive things is often equipped with a soft upholstery, pos. 4. What is up to wall hangers with openwork shield, pos. 5, then in this case its value is only decorative: neither things, nor the walls he protects.

There are still floor-panel hangers with a stand, for example. in the form of a handy, chest or varnish, pos. 1 in fig. on right. This option is not from the best: someone once will be put on the lid, and the clothes removed from the hanger it will wake on the floor. Much more practical outdoor hangers-panel with a banquette, pos. 2. The flower under the seat is the matter of taste of the owners, if only he survives there, but a shoe or a flasher for her care accommodation in a box of a banquet place.

Clothes and keys

Regarding the hawk-panel at the amateur mastery, an additional opportunity appears, namely: to supply such a sidewall to the far from the entrance door of the edge. Perhaps not reaching up to bottom, with a force or a notch. Factory do not do this: the hanger must be designed for drinking clothes on the side. One sidewall does not interfere with this, but it is not known how the hanger will stand at the buyer, but to make the right and left hangers.

What gives such an add-on? Place for a key, invisible from the threshold. In the same place, on the side, it can stand in a trumulous or a cabinet, but the main thing is to be a random visitor to the eyes of the eye, and they are in sight, according to criminologists, a serious factor of spontaneous unlawful actions, without which, i.e. The temptation, the visit is not quite a trusty subject would be safely for both the owners, and for him. Of course, it is possible, luxuriously decorated and with secret constipation, but this is a considerable work and the cost of materials. And so - there will be a simple handus with hooks. Or only hooks, screwed to the sidewall outside the clothing section.

We assume that the suitable design is already selected, and we will do how to make a hanger. Preferably wooden: the material is noble, natural, easily processed. Do not forget other versions; In some cases, more comfortable. Let's start with outdoor hangers as the most functional.

Outdoor

Lovers embrace from the soul, which have a milling tool on wood, can immediately take up the floor frame hanger with legs. Completed from the tree of fine-layer hardwood (oak, beech, rhine, walnut, birch), it looks gorgeous, and in the width takes only 360 mm floor.

As a prototype, a costume hanger is well suited, you just need to make it higher and move up the trouser crossbar so that the shoulders can be hung on it. Instead of a tongue rod and handles, you can install the shelf, and the shoe shelf is mounted at the bottom. The drawings of such a hanger are shown in Fig.:

With the specified other sizes, the structural and overall width (dimensions 430 and 460 compound) without compromising strength and stability can be increased by 1-1.4 m, i.e. The hanger will be already a family width to more than 1.8 m. self-orienting wheels, if complete mobility needs, are installed without problems.

About hooks and trempels

Bags, umbrellas, scarves are also left on the hanger, and the bachelor can also be a skirt with women's linen. It happens, life is life. Clothes are also more convenient to hang on the hooks. Therefore, in frame hangers, sometimes on the main rod (the former trouser in the figure; height 1360) put on the hooks-slings. Their or shoulders, depending on the need, shifted the side of the Skop. But the hooks-runners under the fingers turn into the most inopportune moment. In the hanger of this design and similar to it, the problem is solved simply: the main rod for the shoulders, and still hooks are attached to the top board.

Pipes and profiles

Original hangers are obtained from round or profile metal or plastic pipes, see fig. Nevertheless, despite all the tricks of the design, their organic vices are not going anywhere. The same as the ordinal hung. But high labor intensity is added: to hide the connecting nodes, it is necessary to strain both hands and heads.

From the pipes it is better to make a square base of the flooring-lamps. With the same withdrawable area of \u200b\u200bthe floor, the distance between the points of the support increases 1.4 times. If you still take the base, then weighing up to 1.7 m, it turns into a full-fledged hanger. Most suitable sewer pipes 60 mm.

A brief master class in pictures on the manufacture of the base of the floor hanger from the pipes is shown on the trail. Fig. Cut pipes - 150-300 mm, depending on how much gender you can give the hanger. In addition to them, you will need 3 straight tees, 4 straight angle and 4 plugs. Connections - on a glue for propylene or PVC, depending on the material of the pipe. Weighing - sand or small rubble.

One of the comments to the original design begins with the question of about this: "Why was it possible to just solder?". Judging by the fact that then in the same comment, the angles of 90 with an obvious claim to professionalism are called discharges (plumbing taps are oblique tees), 2-3 more and as much exclamation are asked to an intercom.

Nevertheless, the author of the product, even if not knowing the sanitary terminology, decided the task quite in engineering. Hermetic junctions of a hanger for nothing, and the glue tube will cost much cheaper the rental chapter for propylene. Which, besides, you need to learn how to use, rewriting the material to the material. For a lot of reliability, you can reinforce with phosphatized (black) screws: on black their heads are not visible, and the hanger strength will not lose.

Note: Vfed in the original design, too, from the pipes, but the design of it, to be honest, not ... It would be better to drill oblique holes in the rack and insert some durable pins in the same glue; Wooden, metal.

Simple Rama

The frame hanger from the pipes can be without legs, just leaning against the wall with a slope. However, the slope should be negative. Between the wall and clothing on the shoulder should be at least 350 mm. If the tilt of the frame is positive (the upper crossbar is adjacent to the wall), then the lower "leaves" from the plinth by 500-600 mm. In a small hallway, this is a serious inconvenience. In addition, behind the lower crossbar or will be cling to the legs and it will beat the floor, or it will have to be attached to the floor, and this is very bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you seen on sale furniture you need to screw up? Is that special purpose, for example. rack. And that, there, too, try to do fasteners to the walls and, in the extreme case, the ceiling.

The scheme of frame hanger with a negative slope from the pipes is shown in Fig. Materials are the same: segments of direct sewer pipes 60 mm, angles 90 and direct tees. The withdrawn of the useful area of \u200b\u200bthe floor is zero. Below can be a shoe or a banquette. For mounting to the wall, so as not to bury a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help holding beams - stretch marks are attached to the wall of the pair of self-tales in dowels each.

Wall mounted

Simple hangers - Panels do not require a special parsing. How made a wooden wall hanger, see eg video.

Video: Wall hanger with her own hands

Here we remember, firstly, about the hanger-sconce. Foldable, it can be very useful if a large company or a child gathered returned from the courtyard at least lick.

An example of a design of this kind is shown on the right in Fig. However, its creators were clearly guided by the principle: "Consumption is the basis of money turnover." The outer (folded form) side of the folding plate is inactive, and the locking mechanism is needed. And another single hanger for every day.

Meanwhile, folding wall hangers are known since the time of Ancient Egypt. In the local climate, the upper clothes were abandoned by occasionally, in bad weather, but after socks it was necessary to dry. To keep a separate hanger in the edges where the rain and cold times a year not every year, there was no point, so they came up with such as on the right in Fig.

In folded form, the Compact wall hanger of the Egyptians was fixed by a cypress stick. Now, of course, you can put a ball retainer or just a hook. The main thing is the hooks of the hooks must be in 3/4 of the circle, then they will not fall off with them and with a folder. And without need, the whole hanger looks like a wand on the wall; On hooks you can hang bags, umbrellas, keys.

More about hooks

The original wooden hanger can be made at all without metal, not counting fasteners. Do not rush to throw out the New Year's pine or tree (only workpieces you need to turn upside down):

Video: Original tree hanger do it yourself

Best of all, such a hanger will look at the country, in a brusade or a skeleton house. Depending on the interior design - both in the urban apartment. It will greatly go into the bath: the touch of sparkling skin to the metal and unpleasant, and to some extent even is even attempting.

Hangers in children

Probably, all children scatter wear. It is not necessary to especially marry them for this: not known in the reasonable limits of chaos, they do not seek order. Who is against - answer the question of Friday to Robinzon Cruzo: "Why does God not kill the devil?"

Nevertheless, teach children to handle things as needed. Only a children's hanger so as not to cause explicit psychological rejection, it should look somewhat disordered. It is also very desirable that it is associated with a child with a favorite game or hobby. Examples of wall hangers in the children's type "Game / Hobby" are given to pos. 1 and 2 Fig.

Universal method of this kind - hanger-tree, pos. 3. In the wood circuit, as in any fractal structure, order and chaos interact and complement each other, generating a harmonious whole. Do not forget to make a tree again, for example. From plywood from 12 mm, and as it should, with a step of no more than 250-300 mm, attach to the wall with screws from 6 mm in propylene dowels. Tree, it's climbing on it.

Outdoor hangers in the nursery for the same reason are undesirable: well, they will still get climb, and rumble. Therefore, if you already want a floor hanger in the nursery, you need to do this on which you can't fit, which is visible to pos. 4 and 5.

About Study Plywood

In any case, there are problems in front of the parents to which there are no small things: the consumption of material and labor intensity. Draw a complex contour on the grid on a whole piece of plywood is already not easy, then it needs to be exactly cut, which is even harder. And in the end it turns out that 60% or 80% of the material went into the departure, nothing more suitable. Needl, on the contrary, make a children's hanger tree from waste. Or uncoll down the one-piece sheet.

The way for this has long been known: elemental cutting and assembly. If the wood is plywood, for the full strength of the finished product, every detail is gained from 2 layers, leaving acc. False and grooves, see fig. Fragments of billets are collected on PVA glue, a wood assembly or express (liquid nails). If the assembly on the PVA, fragments should be additionally copped with small nails with a snake with a step of 100-150 mm with an indent from the edges of 30-40 mm.

Collect a hanger-tree on the same glues, but now each connection must be made by the envelope tree screws. Then the gaps and fasteners heads (they need to drown them when assembling) are rubbed with a putty from sawdust of the same plywood on PVA. Such a tree and without painting, only under varnish, it will look solid.

Note: Just in case we will recall - all wooden parts of any wooden hanger before assembly need to be elapsed by the sandpaper of small numbers and treat the water-polymer emulsion or diluted water three-in-five PVA. After impregnation, before further work, they make a technological break until the details are completely drying (1-3 days, depending on its size).

And about the hooks - finally

Above on the illustrations, you most likely noticed the curved wooden hooks and others. Details of the hangers. They are quite possible to make at home. In production, dense small-layer, without defects, wood or water-resistant birch fane (BS varieties) bent heated with sprinkling or dry, but for homework, these methods are too complicated. More or less simply sprinkled only bamboo: the workpiece is boiled half an hour in a rapidly boiling water, after which it bends hands. In the case of bending on the template, the workpiece to it is needed quickly, until it has cooled, to climb a wide taper x / b or a strip of natural tarpaulin.

At home, it is easier to cut the blanks of the required configuration from the plywood sheet (any) or MDF of the desired thickness or twice the quadruple more by quantity, from a thin sheet material to dial it from the thickness. Cut the allowance for the first processing OK. 1 mm. The chopped blanks are tightly tightened with a package in joiner's visits or in a plug-in stripping from thick plywood and are processed by a rashpil on a tree in size, and then the skin is thoughtless. The rashpil is enough single, flat and semicircular working surfaces, see fig.

Billets are collected into the details described above. Face surfaces, if you need to hide the layered plywood structure, stick the film-self-keys with strips under the tree. After that, the part twice and three times lacquate acrylic varnish on a water basis; Nitrolac can spoil self-keys. It is not worth shaping (raging) with a plastic furniture edge: you need to accurately choose a groove under the anchor of the edge, for which the milling machine is required, but on curvilinear surfaces of the large curvature and the low-length edge still holds badly. And the details are saved by self-keys, under varnish, from whole wooden, not immediately differs from the master-chamber.

Everyone knows the statement that "the theater begins with hangers." It is worth saying that not only in public institutions the hanger is playing an important role, but also in apartments and houses. After all, the absence of this important subject of the interior can cause disorder in the hallway. Today there is a lot of all kinds of hangers of different shapes and design, but it will be completely easy to do with its own forces from breed materials. On how to do it - tell me further.

For the manufacture of clothes hangers typically use wood. But not every material is suitable for this. It should be selected as possible and durable wood. If the material does not succeed as it should be dry, after a while it can lose its shape. Of all the wood breeds for hangers, it is recommended to give preference to pine. This material is good in that it is easy to handle and has a small weight. If you decide to use an array of oak, then it should be noted that it is more difficult to handle and is heavier. Pieces of wood hangers typically combine with glue. It is similar to some important requirements. By the way, the glue in the presence of unreasonable wood can lose its adhesion, due to the selection of moisture with the material.

A very important role is played by the choice of hanger shape. It should be borne in mind that for this subject of the interior, it is necessary for at least three supports, the length of which directly depends on the height of the product. Thus, it turns out that the higher the hanger, the more massive and more of it should be supports. Often this product is intended not only for outerwear, but also for trouser suits, to keep all the clothes in one place. For this purpose, the width of the hanger is usually done more than usual. Thus, a lot of different clothes can fit here.

When you were determined with the hanger model, you should draw a scheme in which exact dimensions of the future product will be indicated. Moreover, it is advisable to describe the size of the even the smallest details. This will have to be like the way during the manufacture of the product. When the scheme is ready, you can start on the floor of the floor hanger for clothes wooden.

Clothes rack outdoor with their own hands

For the manufacture of the product requires:

saw,
drill,
sandpaper
chisel.

Necessary materials:

bars of the desired size
boards
wood glue
self-tapping screw
artwork for processing the product,

When all this is, you can proceed to work. It is advisable to decide in advance with a tint of the future product. In general, light wood can be painted almost in any tone. To do this, it is enough to apply the veil until the surface of the hanger is the desired shade. When coating, a veneer or varnish should be put under the product some substrate. Otherwise, the drops can accidentally get to the floor. Laccue should be used only after completely drying the veil. In general, with varnish due to a strong smell, it is best to work in a room that is well ventilated or, in general, outdoors. After the lacquer is opened, the product should be wiped with a rag moistened in a weak vinegar solution.

Consider the order of work:

First you need to prepare wood. In particular, the tree trunk is cleaned from the bark and coarse bitch. Choir in no way should be left, no matter how much it wanted to give the product a more natural look. After all, if you leave it, it will gradually turn, thereby creating an additional reason for cleaning the room. In addition, the bark is often a habitat of small insects.
Corre can be removed using an ax or knife. After that, you should walk several times on wood, first coarse, and then small emery paper. The surface in the end should become smooth, at least in order for the knots not clinging clothes.
After that, it is necessary to make the basis of the product. It is worth saying that all elements of hangers (legs and tripod) are advisable to make one whole. It is not worth starting from the cross. Otherwise, if it is then to attach to her the hanger itself, the design may volatrate over time. It is necessary to follow the following rule - the lower edge of the tripod must be performed on the same plane with the legs of the legs.
After that, you can move to the measurement of the diameter of the barrel. The dimensions dropped will be needed to select a suitable width bar. If the bar is wider than you need, you can cut it with a hacksaw along to the required size.
Typically, the heating height is about 1.7 m. For the product of such a height of the cross must have departures of about 30-32 cm. Therefore, a pair of 65 cm bars will be needed. They will need to be cut in half to make four blanks with a length of about 30-32 cm.
The most difficult thing is to attach the legs to the circular barrel. If you just attach bars, the design will be unstable, and after the first trip, most likely falls apart. It is more correct to put a tripod on the floor and put the leg blanks to it. To connect them, you will need to make triangular wooden inserts. Then they are attached to the bars using selflessness.
To strengthen the product in places of attachment of triangular elements to the legs and a trunk, you need to drill a hole with a diameter of several millimeters less than the fastener diameter. It will later need to pour glue. Only after that you can turn the screws. Sometimes to impart the stability of the design of the hole, except for glue, are also filled with pieces of rubber.
To give a finished hanger functionality, you should add hooks for outerwear to it. They can be made at some distance from the barrel. Here one important rule should be followed. So that the design does not fall, the center of gravity hanged on the clothes hanger should not be outside the crosses.
Hooks can be used both homemade and decorative. In any case, they cannot be attached directly to the tripod, because the hanger outdoor for clothes is quickly wear out and will be unusable. It can be done like this: take the bars and cut down the square with a side of a slightly more than the diameter of the barrel. Initially, the hooks are attached to this square of the tree, and then to the product itself. Thus, they will be securely fixed, and at the same time they will not contact the product with a "body", which, thanks to such a device, will last longer. This is especially useful for wardrobe hangers, which are used quite often.

You yourself can decide which hooks to use are decorative or homemade. However, if you make them yourself out of the wire, they will have a not very attractive look. Therefore, it is better to still give preference to decorative hooks purchased in the store. They are attached to the tree usually for a couple of screws. If you have the necessary skills, you can with the help of the chisel, cut the holes of the square shape where the hooks should then be "hide". It will look better than a simple attitude on the self-tapping screw. When the hooks are in place, you need to connect a square wooden insert with the upper part of the product using multiple screws.

As for the hanger itself, it can be painted or covered with varnish. Chief Choose to your taste, but it is better to pick up the premises' finishing style, where the wooden hanger floor is standing for an entrance hall. The paint or varnish layer is applied at least two times.

The base for the floor-haired wooden hanger should be sufficiently heavy and stable. As it, you can adjust the bottom from the lamp, the oscillation of the outdoor fan or buy a stand for the Christmas tree.

Costume hanger outdoor wooden

The above-described hanger is not suitable for men's suits. Therefore, it makes a slightly different design for them. As the main material similarly use wood. To assemble such a hanger, you must first measure and cut the blanks, according to the specified sizes. Then they are carefully processed and polished. After that, fasteners are made in the right places.

Next, according to the scheme, the product itself is assembled and its finishing finish is performed. It will remain to attach to the base of rubber or wheels. A little more about assembling such a hanger: first vertical racks are screwed to the base using 4 large screws. Then between these supports is inserted and the plank is screwed with small screws. Next, the holder for trousers is inserted into the holes of the vertical racks. To securely fix it, the kiyanka will come in handy. After that, the design is screwed to vertical racks using four screws. Then the shoulders are screwed. The costume rack is ready for use.

How to make a wall hanger

The basis of such a hanger is a shield on which hooks placed. It can be done both solid and lattice. For the latter, you will need less material, and besides it is easier. To assemble such a shield take a couple of bars and attach in parallel to each other by means of a dowel. After that, the vertical slats of about 8 cm wide are nailed to them, and the hooks are attached to the boards.

The dimensions of such hangers can be different and mainly depend on the wall dimensions and the entire premises. If you wish, it is possible to place it beautifully: to cover with varnish, paint or salary with self-tailed film. In any case, do not forget how to handle ends and edges, so that there are no roughness left. If there is a desire, you can do at the top of the hangers with the help of metal corners the shelf in the form of a boards with a width of about 25 cm, where the caps will be stored. If the hanger is made in the entire height of the wall, then the shelf for shoes is usually equipped at the bottom. It is desirable to install a 5 × 5 bar bars below that will support this shelf.

Floor hangers Wooden: photo

The hanger is an integral element of any entrance hall. It is her that we see, entering any house. To date, there is a huge variety of models of such furniture, but the most popular is considered racks for clothes outdoor.

Existing varieties

Depending on the design features and on purpose, three types of such are distinguished:

costume;
wardrobe;
hanger-rack for clothing Outdoor (in the hallway will fit perfectly).

Costume options are separate devices intended for storing business wardrobe. Such models usually consist of a rod or crossbar for trousers, shoulders for jackets and a shirt and a separate tier on which ties hang. More modern racks for clothing floor are equipped with additional shelves and moving or stationary mirrors.

Wardrobe models are distinguished by impressive sizes. The main purpose of this furniture is to keep dresses and other clothes on the shoulder. As a rule, such models are equipped with a highly located bar for placement of wardrobe items. Standard Wardrobe has two support legs with a crossbar in the middle. Multifunctional models have additional moving rods and crossbars.

Options used for hallways are made in the form of a high rack, at the top of which there are special hooks. The stability of such a design is ensured due to the presence of a small rounded base with several legs.

Materials from which this furniture is produced

Modern clothing racks are made of wood or metal. In some models, manufacturers can successfully combine parts that have different origins and textures. For their finishing, natural materials are used (animal horns or different species of wood), plastic, painted or chrome metal.

Required tools and materials

If you wish, this furniture can be done on your own. To do this, we need to be in advance with hacksaw, drills, drill, sandpaper, chisel, varnish and verse. From the materials we will need:

bars;
carpentry glue;
boards;
saws.

Outdoor: do it yourself making furniture

Boards and bars must be as successful as possible. Racks for clothing outdoor, made of poor-quality raw materials, quickly fail. Insufficiently dried wood will begin to highlight moisture, and glue, fastening individual structural elements, simply will move away. The best material for the manufacture of rack hangers is considered pine. This wood does not require complex processing and has a relatively low weight.

The higher the finished product, the wider there should be his legs. It is desirable that the product has at least three supports. Deciding with the model of the future hanger, it is necessary to draw it to the scheme, make preliminary calculations, measure the height and width of the structure. After completing the description of the sizes of all parts, you can proceed to work.

The process of manufacturing outdoor hangers for men's suits consists of several stages:

cutting blanks at a previously developed project;
careful treatment and grinding of wooden elements;
drill mounting holes in advanced places;
build construction.
execution of finishing finish;
screening roller wheels or sticking rubber gaskets.

The final stage of the work should be to give the finished product of aesthetic appearance. To do this, it is treated with a mourn and operate with varnish. To drop the morone accidentally not blurred the floor, it is necessary to do it on a special substrate. Varnish is applied only after completely drying the veil. It is recommended to work with it outdoors or in a well-ventilated room.

Stands for clothes outdoor for shops

Such hangers are considered universal shopping equipment, allowing to compactly place and sort offered products. They are easy to understand, do not occupy a lot of space and move without problems on the trading room. The use of outdoor structures significantly facilitates the process of familiarizing potential buyers with the assortment presented in the store. Trading racks-hangers can be single, two- and three-core. Especially for placing fur and leather products reinforced models that carry out the weight of such clothing are manufactured.

Most manufacturers produce two types of such equipment - stationary and mobile. Stationary structures are installed directly on the trading areas and are not moved along the hall. Mobile racks are equipped with special wheels, so they can easily move them from place to place. In almost all models, it is possible to adjust the height of the structure, which significantly facilitates the procedure for changing the range.