Box from plywood carved with their own hands drawings. Box made of wood with your own hands drawings. Box Flower - Great gift to any girl

How to statenly make a box of plywood with your own hands?

There is nothing easier to glue a few plywood lobs together and attach the cover on hinged connections.

But if you want to make beauty, then it will have to work.

Box from plywood with their own hands: drawings and manufacturing technology

First, you need to be able to work like a jigsaw. This is the main part of such a box:

or, if difficulty with drinking can be tried, burning they are simple and make easily:

The easiest way to make a casket such:

we take a sheet of plywood 10 mm. or thicker, sizes are your personal choice and cut the bottom harvesting and the lid of the same dimensions further the side walls of them are only four. But the most important thing in this business is to withstand the straight angles dug blanks.

When the workpieces are ready and drove them can be glued to the epoxy resin for this glue, nails or screws are not needed. To mount the lid, it is necessary on the back side of the box itself gently remove the angle of 45 degrees to do the same and then make a recess for fasteners and on the box and on the lid.

and in the opposite side, we make a fixing heater:

Here in principle and everything is ready now case for your fantasy. Want to make carved linings you want to just burn out and you want to just cover it with a veneer under the antique, get the appellection very beautifully.

For the manufacture of a box of plywood with their own hands, in addition to plywood, we will persuade:

glue,
circular or electrolybiz,
loop
acrylic lacquer,
latch (not required)
paint (optional),
manual Lobzik and a drill with a small drill (for thin works).

It would be good to draw at least an exemplary appearance of the casket, make templates of the sides (walls, bottom, cover), then you need to place future blanks on the plywood and cut them. If necessary, you can sand irregularities emery paper. Now we have a kind of designer, which we must collect together. Take the glue and work, press the details well to each other, so that the connections are durable. In several places you can additionally strengthen the connection with thin cloves, but I prefer to do not do that everything looks "purely", although these places can be decorated in the future.

Further actions are performed depending on the design of your box. If the lid should be mounted on a loop, then, accordingly, drills the holes and cover the loop. Next, you can paint the box, apply some patterns and cover with varnish (loops and latch, if any, it is better to take off at the time of work).

The above described the easiest option of the box, but if you wish, you can do something like this:

If the casket must contain openwork through patterns, then they can be made on a separate sheet of plywood, and then glue a simple box from the description above.

If you show fantasy, you can make a multi-level box on the same principle.

We make a unique decor element

To make a box of plywood, with your own hands, take the usual technician tools (jigsaw, PVA glue, sandpaper, etc.), which can be found almost every home. You do not need any specific skills to work with different materials, just just gain the necessary patience.

Box of plywood with your own hands: instruction and video

Standard plywood sheets are sold in almost every construction store and are affordable. Depending on the parameters of the casket, select the size of the web. Most often, one sheet is quite enough to make a box of plywood.

First of all, determine which height and thickness should be the walls of your product. From this will depend on the type of plywood and her technological features. Note that the quality of the material affects the durability of the final product. Below is presented creative project According to the technology casket of plywood with dimensions of 10x10x8 centimeters. Sheet thickness is one centimeter. Even if you have experience with similar materialsYou should use drawings, schemes and patterns that will help in creating any perfect product.

Instruction

All the steps are shown in enough details, but below we describe some of the main points of how to make a box of plywood:

First of all, we drink 4 side walls with dimensions of 10x8 centimeters using a jig or hacksaws;
Cover and bottom of our product are created with the same sides of 10 cm;
Side walls must be interconnected according to an angle of 45 degrees. Thus, you can achieve a more accurate and attractive type of product. To do this, initially make marking for drinking (drawings of the plywood box are shown below). A similar cut is very convenient to do with the support of the jigsaw;
Then the fitted edges attach to each other using PVA (pay attention to the instructions in the photo below);
Plywood walls are placed in such a way that the frame is formed;
Attach a pre-carved pre-cut bottom and lid. Ultimately, you have to get a parallelepiped;
It is best to leave this design for about a day to completely fasten the walls with each other. As needed, you can remove excess glue and round the edges;
Using ready template, Spend on the front wall line, so that it retreats from the edge of two centimeters. So that you have a beautiful box of plywood publs, or circular saw Or hacking, make careless outlines from all sides of the base. Pay special attention to this stage, since the final result depends on this;
After that, from the back of the foundation from plywood, you should remove the champions under the loop. Such a procedure is needed so that they can be careful and not strongly discharged. Similar actions make all professional wood masters and if you decide to independently construct a box of plywood, then without it can not do. Thanks to such an easy procedure, the final type of product looks greatly attractive. Dumping from plywood Casket chamfer can be performed using a jigsaw or other infrident tool.

And now you should pay attention to the loop. If you decide to properly construct a box of plywood, you can apply accessories purchased in the store or make it yourself. The last option is cheaper. There is no big difference between these loops. Optionally, you can create them from ordinary tin cans. To do this, you will need special scissors for metal. Cut out the blanks as shown in the photo below. As an axis, you can apply the usual dense wire or an unnecessary piece of wire. After that, it is located in the center of the tight blank loop and with the help of pliers, clamp at the edges. Alone, you can create a loop that are ideal for your casket from plywood.

To prevent the product cover offset, you should do small holes in it. It is desirable that the depth is approximately half acetimeter. These holes are drilled in the middle of the front wall and in the front of the covers of the plywood box. It is advisable to outline the holes in the drawing.

The lid to base is mounted on conventional small-length screws. We screw them through the hinges to the walls. After that, you can make further decor of the product.

If you want to surprise your friends and loved ones original giftYou can create a homemade box of plywood. If you clearly follow the recommendations that are induced in this article, it will take you at a minimum of time and effort.

Caskets from plywood are not only beautiful, but also quite functional. They can be accommodated for storing jewelry, sewing accessories, shoes, spices. Making them yourself, you can give them the form that will not only well fit into the interior design, but also decorate it. Make a box of plywood can everyone may need some expensive and complex tools for manufacture. Processing Faneru is quite easy, everyone can learn it.

The box of plywood can be accommodated for storing jewelry, shoes, sewing accessories or various spices.

Selection of material

First of all, you will need, of course, plywood. The quality of the veneer on it should be the best: you should choose the first or second grade. On the surface of the plywood should not be resintees, bitch, fuses and other defects. The higher the grade of plywood, the better the result you can get.

Grade plywood.

Before starting work, Phaneru carefully dry, since the material impregnated with moisture can cause the tool breakage. The veneer must be combined on the entire surface of the workpiece, especially if you decide to cut patterns. The color of the veneer is only if the surface is not colored and covered with varnish. If the plywood is processed, then it is better to focus on quality.

Plywood thickness should be chosen on the basis of which dimensions will have a future product. For decorative desktop boxes, 4-5 mm thick is usually chosen. It is not recommended to use a more subtle material, since when he picks it can start flaws.

For connecting parts, small nails will be needed, furniture glue or screws.

Name of the site!

For trim boxes, lacquer, paints, beads, ribbons or other decorative elements you wish to decorate the product.

Instruments

The electrolovka is needed for the neat and fast cutting of the drawings in the plywood.

Electric or manual jigsaw, which can be used for figure thread.
A hammer.
When using screws, you will need a screwdriver.
Wood peelings (for cutting plywood sheets).
Pilking for jigsaw.
Woodflaps (triangular, flat and round).
Tampons, rollers and brushes for finishing the box.
Sandpaper.

Manufacturing technology

Before starting to make a box, are determined with its appearance, think about the design and sizes, make drawings. First of all, it is necessary to make a sketch and put on it all sizes. So that there are no unforeseen surprises, it is better to make a paper layout in advance from paper or cardboard. Thus, you will be sure that the box will be the right size. If the layout completely satisfied you, then you can start performing drawings on millimeter paper.

Drawing box of plywood.

Based on the drawings, a sheet of cutting is formed. IN lately The masters are increasingly using a special computer program for cutting sheet. List, cutting cut the lid, bottom and walls of the future casket. Cut parts can be independently, but you can order on the company, but in this case the cost of making the casket will increase.

The carved strips are polished, while paying special attention to stripping edges. Prepared sketches are applied to parts and transfer images for drinking. If it is necessary to make through holes, they are made using a drill, the patterns are cut out the jigsaw. Openwork parts are treated with a file and emery paper, while removing the chamfer and removing the offices. If openwork images are not provided, you can immediately move to the assembly.

The first thing is bonded with each other side walls. It is best to use a adhesive compound that can be reinforced with furniture nails or stapler brackets.

After that, the bottom of the box is attached to the frame. Loops are installed with the help of self-tapping screws. Next, these loops are hung the lid, which can be made flat, and can be collected in the form of a box.

After the box is collected, all the angles and the surface are once again cleaned with the help of sandpaper, which appeared during the assembly of burstages are removed. All joints are spitting, eliminating irregularities. When the surface is driving, the putty is grinning until the surface becomes perfectly smooth.

After that, all outdoor parts are ground. The primer is applied to lay the layer of varnish well closed with wood. Varnish is applied in several layers. If lacquer with colored pigments is used, then the darker is first applied, and at the end the brightest transparent layer. Instead of varnishing the box can be colored special paints For wood. At the end of work on the box, fittings are installed: latches, knobs, locks, etc.

Finish casket

Crakhelur when drying creates on the surface of the varnish of microcracks.

Very fashionable recently began to use cracker, when drying, it creates a lot of microcracks on the surface of varnish, which create an effect of aging. If you own the decoupage technique, you can save the box with decorative images before varnishing.

If desired, can be separated and the inner surface of the casket. Most. simple way There will be grinding and lacquer coating. If there is a desire, you can save the inner surface by velvet or tinted with a cloth. So it will look much more attractive. If the casket is designed to store spices or other food, then it is impossible to lacquer inside it.

The casket for a teenage girl can be separated by beads or beads and attach a small lock to the top to the upper part so that young girl can keep her secrets there. If the box is manufactured for a woman, then with the help of acrylic paints and brushes, it can be cordoned with your favorite flowers or patterns. Interior caskets are usually chosen under the color of furniture or walls, on the casket for drugs, you can depict a picture of a doctor from a cartoon or draw a red cross. The casket for sewing accessories is better divided into several compartments (make partitions from plywood). Casket can be separated by pieces of photos, use to finish autumn leaves And butterfly wings.

The technician is very much, it remains only to choose the appropriate option!

//moyafanera.ru/youtu.be/ozjopvztgdq

The jigsaw inside you can write a gift inscription, poems or quotation. Inside the caskets, you can drop a few drops of essential oil: it neutralizes the smell of varnish and will attach a pleasant aroma stored in the casket things. A piece of mirror can be glued to the lid of the casket for storing cosmetics. Having attached a little imagination, you can easily decorate the box to your taste, thereby realizing your creative potential.

Long ago, for storage of all the little things I was Made box Tedded. After my beloved moved to me, and I was evicted from the box, the use of the box rose in tens of times. Therefore, it is not surprising that in the past years, the view of my creation became a very pension. It is time to make a new box that would organically fit into the interior.

For making a box, I needed:

Plywood 8-Missile;
Glue polymer;
Electrolovik;
Sandpaper;
Putty;
Loops (2pcs);
Screws;
Gas-burner;
Acrylic lacquer;
Gold paint;
Milling mill with a cutter under 45 ° and a tracing mill.

Place the future blanks on the plywood (4 walls of the box, bottom, 4 walls of the lid, cover).

Electrolzik Cut the sheet.

Here it is worth notifying that it was possible to cut it on the circular, then it would happen even. But I missed this moment something.

I did not want the layers of plywood to be visible outside. Therefore, we pass on the edges to obtain a bevel at 45 °.

Thoroughly blame all surfaces of the blanks, aligning flaws and giving a neat look.

We collect a box on a flat surface on polymer glue. It is viscous and quite quickly grasps.

Similarly, we collect the lid.

While the glue has not grabbed finally, mount the walls of the lid along the walls of the box.

We get a more or less visual view of the future casket.

Split slit in the joints. There would be no them if there was a milling table, and so I had to work with small details on the weight.

Thrums are already spacious.

Place the places under the loop.

Furious cutter choose landing places.

We pretend what happened.

Sadim loops on screws.

One moment is an important point! Before screwing the loops Before Drill the holes for the screws with a drill slightly smaller diameter. Otherwise, when screwing off the screws, your Fana will break.

Remove loop. Caution, not overheating, burn the box. From the overheating of the wall can be a screw.

We again install the loop. Then we open the casket with acrylic varnish.

Plug by painting scotch and sponge hand faces.

Since my half was born in the year of the rabbit, I decided to print and cut the hieroglyph "Rabbit". Similarly, on the front side I am preparing stencil in the form of a stylized rabbit.

Putting stencils. Let dry.

The box of plywood can be accommodated for storing jewelry, shoes, sewing accessories or various spices.

Selection of material

For connecting parts, you will need small nails, furnace and self-tapping screw. For trim boxes, lacquer, paints, beads, ribbons or other decorative elements you wish to decorate the product.

Back to the category

Instruments

The electrolovka is needed for the neat and fast cutting of the drawings in the plywood.

Electric or manual jigsaw, which can be used for figure thread.
A hammer.
When using screws, you will need a screwdriver.
Wood peelings (for cutting plywood sheets).
Pilking for jigsaw.
Woodflaps (triangular, flat and round).
Tampons, rollers and brushes for finishing the box.
Sandpaper.

Back to the category

Manufacturing technology

Based on the drawings, a sheet of cutting is formed. Recently, the wizard is increasingly using a special computer program for cutting sheets. List, cutting cut the lid, bottom and walls of the future casket. Cut parts can be independently, but you can order on the company, but in this case the cost of making the casket will increase.

The first thing is bonded with each other side walls. It is best to use a adhesive compound that can be reinforced with furniture nails or stapler brackets. After that, the bottom of the box is attached to the frame. Loops are installed with the help of self-tapping screws. Next, these loops are hung the lid, which can be made flat, and can be collected in the form of a box.

After that, all outdoor parts are ground. The primer is applied to lay the layer of varnish well closed with wood. Varnish is applied in several layers. If lacquer with colored pigments is used, then the darker is first applied, and at the end the brightest transparent layer. Instead of varnishing the box can be painted with special paints for wood. At the end of work on the box, fittings are installed: latches, knobs, locks, etc.

Plywood sheets of various thicknesses are practically perfect Material For the manufacture of a variety of decorative elements. Having mastered the skills of working with this material, you can do different shelves, frames, boxes for storing small things, etc. At the same time, each product will be given a unique appearance, since plywood is processed simply and without the use of complex tools.
In the article, we will tell you how to make a small plywood box, but the technique used for this operations can also be applicable for other home decor items.

What will need to work

Choose materials

Naturally, for the manufacture:

The quality of the veneer must be maximum (first-second grade). The surface of the sheet does not allow the presence of swings, knots, resintees, etc.

It is very important that the sheets of veneer are punctured on the entire area of \u200b\u200bthe workpiece, especially if the walls of our box will be carved.
Before working, Phaneru should dry, because the raw material often leads to a breakdown of the instrument.
The color of the veneer will play the role only if all surfaces we leave without coloring and varnishing. If any processing is used, it is better to focus on the selection of plywood in quality, and the necessary color will be achieved through the use of pigments.
The thickness depends on the product dimensions. As a rule, for decorative desktop boxes, a 4-6 mm thick phane is used.

Tip! Phaneur Thinnish 4 mm is not worth using: it will cause difficulties in the processing of the ends, since the thin sheets of the veneer are smelted when picking.

Small nails with hidden hats, screws or furnace glue can be used to connect separate parts.
Also for final processing, we will need paint or varnish.

Instruments

Working with plywood does not require powerful and bulky instruments. Here, rather, devices will be appropriate for the "fine" work:

Lobzik (manual or electric, but necessarily intended for figure thread).
Power supply for jigsaw.
Saw on wood for rough processing Billets and cutting plywood sheets.
Screwdriver (if the screws will be used).
A hammer.
A set of failed files (round, flat and triangular).
Sanding paper for grinding.
Paints, rollers and tampons for finish finish Products.

When all the materials and tools are purchased and prepared for work, you can begin the manufacture of our plywood box.

Making a decorative box

Drawing and cutting

For the manufacture of a beautiful casket, first of all, we need quite detailed drawings: how to make a box of plywood, we describe below, but with its appearance and sizes you will have to be determined by yourself:

First choose the design, which is then transferred to a sheet of paper as a sketch.
On the sketch I put the alleged dimensions. To avoid unpleasant surprises, specialists recommend folding the simplest paper layout. So you will know for sure that the product will "become" to the place allotted to him, and it will not be too big nor too small.
If the dimensions satisfy us - on millimeter paper, you perform a drawing of a plywood box.

Based on the drawing, we form a sheet of cutting, the most compactly placing the details of our future casket on the workpiece. You can make it using paper templates, but it will be easier to use a special computer program.
By a sheet of cutting, cut the wall, the bottom and the cover of the billet box. This can be done both independently and in the firm that is engaged in a sharp Fiberboard, chipboard and similar materials. True, not all companies will take for such a small job, and the price of the product in this case will increase.

Processing and assembly of the product

After at our disposal, there is a necessary amount of cut-out blanks, you can start creating the box itself:

Carved plywood staks process the skin. Special attention is paid to stripping edges.
Templates printed on the printer apply to the billets and transfer to plywood base drawings for drinking.
For through propilov, we drill the starting holes of the drill, after which we cut the pattern using the jigsaw.

Openwork parts are additionally processed by files and sandpaper, removing the offices and taking off the chamfer.

Note! These recommendations should be taken into account only if the drawings used by the plywood caskets assume the presence of openwork elements. If the walls and the lid remain integer, you can immediately move to the assembly.

When the preparatory processing is over, we start collecting a box:

Initially, we fasten the side walls. The most reliable is the adhesive compound, reinforced with furniture nails or stapler brackets.

Then KAPPIM bottom carcass.
At the top with the help of self-tapping screws fix metal loops. They inspire the lid (flat or collected in the form of a box).

Finish finish

Before us is a practically finished box, which, however, need to finalize. Here the instruction depends largely on what we want to get in the end:

We re-process all surfaces and angles using sandpaper, removing all burrs in the installation process.
The joints of the sheets of plywood and fasteners are spitting, hiding all irregularities. The dried putty is grinding, achieving an ideally smooth surface.
On all external planes we apply a layer of primer, which will provide a reliable grip of wood with lacquer coating.
We carry out the varnish, causing a varnish in several layers. If a varnish mixture is used with pigments, then the base layers are laid into the base layers, and the surface is virtually transparent.
An alternative varnish can be painting a box with special paints for wood.

Tip! To improve the appearance in the paint, the decorative component is sometimes added - cracker. Hydish, it creates a microcrack network on a colored layer, thus imitating the effect of aging.

Another way to traditional decorating plywood boxes is a decoupage. This technology lies in pasting billets with decorative wipes with subsequent varnishing.
At the end of all the work, fix the accessories on the surfaces: handles, latches, etc.

Separately, it is necessary to treat the inner surface. The easiest thing is to stick all the irregularities and cover the Faneru. But it is possible to work hard, separating the "insides" with a cloth: Of course, this task is not easy, but also looks like a casket will be much more attractive!

Related Materials

Let's try to make such an item as a casket made of wood, with your own hands. What is useful to this accessory? Boxes Carved wood are perfectly suitable for storing small souvenirs and small collection objects of type marks or coins. They will decorate the interior and give him a note of the identity.

Master Class. Tree caskets do it yourself

Make a casket we will be from a sheet of plywood 8mm thickness as the most affordable material. It should be pre-make sure that the plywood we is going to use, with a flat surface, does not contain details, traces from bitch and other small defects. The pattern of texture should be uniform, then the sheet can easily be cut without fears that the pieces of veneer break down during operation.

Well, let's start. First of all, a drawing of our future product should be applied to the prepared surface - a scheme of a casket made of wood. To do this, take a pencil and simple drawing devices such as a line and circulation. If there is a ready picture that you need to scale, take care of the accuracy of the drawing of each angle and line. Proper and neatly made drawing of a tree casket - prerequisite Success.

Elements rectangular shape allow you to use a plywood list most economically. With a successful layout of unnecessary trimming almost there will be almost no.

We drink right

Then the jigsaw begin the procedure for the neat cutting of all the main parts - the covers, the bottom and walls. The smaller our thread, the more accurate contour, we will receive the details, resulting in the work hours of the file.

Especially gently should be cut through the boundary of the neighboring parts. If it goes the oblique, then immediately both parts will be spoiled, or you will have to even end the other.

After that, the most responsible stage begins associated with the finest work. We are talking On drinking compounds in the form of joinery spikes. For our small casket, small square spikes of simple shape are suitable. The height must match the thickness plywood sheetThat is, in our case, equal to 8 millimeters.

What tool to choose

As a rule, drinking them leads by the mantelpiece. But we can take a jigsaw or a hacksaw for metal. Its blade is great for working with wood, as it is almost not bent.

If you have chosen a jigsaw, it should be cutting almost on the planned line. The indent in the direction of the cut section should not exceed one or two millimeters. A small overwood surplus is subsequently easier to remove the file.

Thus, we made straight marbles. For their compound, bring the jigscription to the edge and carefully deploy 90 degrees. In this case, the movement to them up-down does not stop.

In the same way, drink and remove all unnecessary fragments. From the quality of the execution of this stage of work, it depends on how our future product will be durable and reliable. If at this stage we are an inadvertent spoil the workpiece, all the work will have to begin again.

Now the cover you

We now turn to the cutting of the cover on our casket. Undoubtedly, such work should be done much easier than drinking spikes. But we will not relax. We do not forget to observe the smoothness of the cut and maintain the right angle between the planes of our pink and the surface of the plywood sheet. This is done in order to subsequently there were no cracks between the filled pieces of the lid and the walls.

This is the most difficult stage of work. Next in order, the task is a joint casket with your own hands to be collected in a single whole of individual items. If the spikes are hard to enter the socket or do not enter at all - do not be discouraged. Worse when they fall there.

Subtleties of technology

Surplus material is easily stepping with a file. It is best to choose the one that has a square cross section. Such grinding should be carried out with small portions with constant fitting parts relative to each other.

To fit out as accurate as possible, it should be performed on a table or other smooth surface. For forest reliability, the wall should be placed on glue. Details must be pressed to each other at least for a short period of time.

It is most convenient to do with vice or clamps. At the same time, do not forget to insert a small wooden laying between the product and the steel surface of the tool.

Tree box with your own hands: fix the lid

Crossing the walls of the box, we will fit fit and glue the bottom, as well as the covers. The cover of our casket will be attached to the housing on small metal loops that are easy to buy in any economic store. You can purchase small loops in an amount of 2 or 3 pieces or one long loop for furniture.

Working with hinges, you need to take care that they do not stick over the surface of the body of the product. Therefore, in the place of attachment of each of them, the wood should be slightly selected. We take a jigsaw or a small saw with a straight point.

To screw the loops, select minor screws, the size of which will correspond to the hole diameter in the loops. So that they were neatly fastened precisely in the intended place, and the plywood did not turn out to be cleaved, drove the hole follows the size of a little less than the diameter of the screw. This difference should be no more than one or two millimeters.

Do not forget about the castle

From the outside, the box is preferably provided with any mechanism for locking in the form of, for example, a lock, hook or latch. It will help to save the contents and will not give the box to open at the most unexpected moment.

All similar details are attached similarly to loops with small screws in advance drilled holes for them. If the casket material is a tree, not plywood, even a small furniture lock is allowed.

Mostly ready. We hope that our project: "Tree caskets" came out successful, and the product turned out to be neat and outwardly attractive. If it is not so - do not be mistaken. A newcomer, who is first taken for the creation of a similar masterpiece, is rarely lucky immediately.

About possible shortcomings

A casket made of wood with your own hands is not required from the first time perfect. Most often the final version demonstrates us unexpected omissions. Nicely there are annoying gaps between not tightly fitted elements. Finding something similar, do not give in to the first impulse - get rid of the unsuccessful craft. It will be wiser to carefully consider the product, analyze where an error was made, and take into account this beneficial experience.

As for the further fate of our product, Much is fixable here. For example, the slots may well be seeding and disguised. After all, there are quite a few cunning techniques.

The easiest option is to take a finished putty for a tree and smell unwanted slicks. You can independently prepare the so-called "liquid tree", the basis of which will serve as the glue used in the work. This option is suitable in the event that we want to bore our bowl with veneer.

In addition, the product can be covered with oil or painted. In the latter case, past the details, before painting them additionally soil.

Decorating our craft

But make a rectangular box and call it a box - not all. The product must be decorated, and best to do it with a thread.

The carved box is a real work of art. Exist different types Tree boxes. In former times, many of them were carefully kept in every home. After all, the wood carving with the creation of a wide variety of geometric patterns, people were carried away from long.

In Russian villages most wooden products, Furniture to the dishes, was decorated with a skillful carvings. At the heart of this decor always lay a regular geometric pattern, and the aesthetic effect was superior to all expectations. Boxes carved from wood were created by real masters of their case, were durable and durable.

Learning to work with wood

If you do not yet own geometric threads - it's time to learn. This is not so difficult. And in order not to spoil our ready-made, so diligently made box, do it first on a separate piece of wood - for example, on a cutting board.

Tools for this procedure will require the simplest. With you, with you it will be quite possible to do with only two knives: the so-called knife-pen and a knife-jammer of a triangular form, as well as a ruler, pencil and a circular.

The knife fell takes when it is required to cut an element of an elongated form, for example, the petal or a sufficiently long chute. It is used for a slightly slot.

The second tool is performed by a slit of various geometric figures, mostly triangular form, as well as straight long lines. Each of the knives must necessarily be sharp and have a comfortable handle.

Geometric thread technology

Immediately before the start of work, you should apply a sketch of the future pattern on the board. You can draw it with a pencil using a ruler and a circulation. And you can use ready stencil, transferring the drawing on the board with a copy.

Suppose our ornament contains vegetable motives. It is from them and should start work. The technology is easy: the thumb is pressed to the board as close as possible, and the index lightly concerns it in the top joint area. That is what keeps the knife, you have the ability to control and change the angle of its tilt and the depth of immersion in the wood. With the help of a thumb blade smoothly and gently moves.

Soldering one side of the element, the board should be flipped over and made a similar operation from the opposite side. Please note: if the chips from under the knife wakes up the "rope" means the tools are quite well sharpened.

How to cut geometric shapes

Elements in the form of triangles and other features of the figures are cut with a knife-jamb. His heel we cut into the wood under the tilt of about 45 degrees, while I do not bring the picture to the edge. We repeat the operation from different sides of the geometric element.

I connect all the slots on the sides. As a result, the sliced \u200b\u200bpiece of wood falls out of the board. Wood residues that could not be cut off with a knife, smoothly and gently cleaned.

By the same principle, we cut all other elements of the pattern. Upon completion of the process, we take the sandpaper and carefully completely polished. It is possible to carry out additional treatment with natural impregnation.

So we learned to the simplest methods of wood thread. In the future, with an increase in the number of crafts and, accordingly, experience, our skill will increase. We will be able to make wooden boxes, not only lacquered or painted in various colors, but also decorated with an extraordinary fantasy ornament, which will look just luxurious.

fB.ru.

Make a plywood box with your own hands, drawing in pdf format

Wooden caskets Universal thing that can serve to perform a variety of tasks. You need a birthday gift or anniversary, on housewarming or on New Year? Man, maybe a woman? Nowhere to put the decorations or not have to keep gift cards? Casket can be bought, however if you do not want to spend hard or wondered how to make a box, this article will be useful.

Box do it yourself

This work was made by Lyudmila Pelim, who had long dedicated to such hobby as art dupile Lobzik.

In order to make such a casket you will need the following tools:

Preparation of workplace

As usual, the first thing you need to equip your workplacewhere you will work. The rules are not complicated: on the table there should be no extra things, the entire tool must lie in their places and be at hand. Not everyone has its desktop and surely you have already thought about creating it. Make the table is not difficult - it is harder to choose a place in the house for him. A good option - This is a warmed balcony where you can start working on a cradle at any time. If you have a specially equipped room with a workbench, then you can say lucky. In a separate article, you can read about the preparation of the desktop where I tried as you can describe the whole process of creating it. After the workplace creation process has completed, you can proceed directly to your future handicraft.

Choosing plywood

The main elements will fit on the Fannery of A4 format, as some details are required to do in several copies, then you will need several blanks. The plywood thickness should be from 2.5 to 3 mm, and depending on the thickness, it is necessary to drink on an internal or outer contour, it is relevant for the grooves in which the elements of the craft are inserted. Before translating the drawing to the Faneru, pollute the workpiece with a large grain, and then small. Observe wooden barber emery paper, and then proceed to grinding. Grind the harvested Phaneur along the layers, and not across. A well ground surface should be smooth, completely smooth, glossy-matte on light and silky to the touch. Pay attention to the location of the fibers, swirls, dents and other vices. Quality and color. If the plywood is not very high-quality and stratified when drinking, read the recommendations to eliminate the bundle of plywood.

Figure Pattern

You need to translate the drawing accurately and carefully: the drawing will fasten with the help of the buttons, two-way painting tape or simply hold the left hand. Check if the drawing is suitable for dimensions. Separate parts place so that the plywood sheet is more economical. It is not worth a hurry, because your future handicraft depends on the drawing. If the time is not enough, then to speed up the translation process, you can use the technique of quickly translating the drawing, for this I propose to get acquainted with the article in the Tips section: Figure Application Technology.

Drinking boxes "parachute"

Rules for drinking a lot, but need to be based on the most common. First, you should cut the internal elements then start the discharge of the circuit. When drinking is no need to hurry. The main thing, when drinking, keep the jigsik always right at an angle of 90 degrees. Put the details on exactly the lines. Lobzik movements should always be smooth up and down. Also, do not forget to follow your posture. Try not to allow SKOs and irregularities. If when drinking you left the line, you should not worry. Such squeezes, irregularities in the subsequent can be removed using a flat file or "coarser-grained" skins.

Relaxation

When drinking, fatigue occurs. Often tired fingers of hands as well as eyes that are always in tension. When working, of course, everyone gets tired, but in order to reduce the load, make a pair of exercises. You can watch exercises here. Take several times during the work.

Assembling boxes "Parachuli"

Assembling details of the vase in this work is simple. When assembling, look at the drawing. If some details are not included in needed details - Sign them. When the craft is going without any problems - glue it. Bloom the dish is needed with the help of "PVA" or "TITAN". You do not need a lot of glue.

Laccination crafts

At the request of the dish, it is possible to cover with a marilka under valuable wood species or simply transparent, it is not necessary to do this, but it will give a large personality to your craft. Try to choose good and high-quality varnish. Pathmarked with a special brush, do not hurry. Try not to leave visible divorces of bubbles and vile from the brush.

Drawing of the casket "Parachuli"

Download the drawing of the box "Parachut" you can follow the following link:

Format:

Volume:

4 sheet format A4.

chudo-lobzik.ru.

Casket is very useful in everyday life. Buying the author's box - expensive pleasure. If there is a desire to become the owner of an exclusive thing or to give near man Handmade casket, it is quite simple to convert the idea. How? Make a casket personally. If you have never worked with a tree before, you select Phaneur as material. A thing from plywood will make even a novice master when he sticks to simple and understandable rules.

Features

This is how those who love to make the necessary for a comfortable life of the little things are characterized by Phaneur. There is no time to master the skills of working with plywood. Having made a box of plywood, it will be possible to perform without any problems from this material shelves, frames and other items that will become an exclusive decoration of the house and the pride of his owners.

The choice of material affects the quality of the product, so it is better to choose 1 and 2 grade plywood.

The right choice of material for such a desired thing is the main question that must be solved before starting to work. Veneer happens 4 varieties. Only 1 and 2 plywood varieties are suitable for the box. When buying a material, you must definitely pay attention to how high-quality his sheets are punctured.

Phaneru before work is necessarily dried. If this rule is bypass, when making a box, you can break the tool. Is the color of the veneer important? It all depends on how the product is presented in finished video. If the plywood casket will not subsequently void or paint, the color of the veneer should be given attention. Going a thing to cover with paint or varnish - then the color of the main material does not matter.

The thickness of plywood is an important question that usually leads newcomers into confusion. The thickness of plywood and dimensions of the box are closely interrelated. The greater the thing, the wider the plywood is necessary. Such products are usually made from plywood whose thickness from 4 to 6 mm. Why not recommend a more subtle plywood? Because the ends of the casket will be more difficult to process. Thin plywood with mechanical exposure to it is able to smell.

Back to the category

Tools and drawings

For the manufacture of the casket, the following tools and materials will be needed:

Drawing box with dimensions.

plywood;
lobzik with a reserve of pylons;
screwdriver;
a hammer;
set of files;
sandpaper;
rollers;
pompona;
tassels.

To make such an exclusive product, you will need a jigsaw and a supply of pylons for it. A saw on a tree is carried out by cutting plywood and coarse processing of blanks for future things. If the box is manufactured using self-tapping screws, a screwdriver is needed. Set of files for woodwork, hammer, sandpaper will be required too. If the finished product is to be painted or varnishing, it is necessary to initially take care of the presence of a varnish, coloring substances, rollers, tassels, pompons and other devices, with whose help operations are carried out.
For the product to look aesthetically, you need a drawing and drawing.

The first step will be drawing a sketch of things, where the estimated sizes of the box of plywood are affixed. If you make a casket for the first time, there is a high probability that somewhere in the calculations will be made inaccuracy. To avoid vain spending time, best of all at the beginning of the casket (its layout) is made of paper. If the paper box liked and its dimensions are recognized as suitable, the drawing of things is transferred to millimeter paper.

Scheme of details of a multifaceted box.

Plywood is dispreded on the basis of this drawing. Details from which the box will consist are closer to each other. This will significantly simplify the cut. Plywood can be painted and through paper templates. To speed up and simplify the manufacture of a box, it is better to draw templates using a computer, and drawings print on the printer. As soon as the wall is cut, the bottom, the lid of the future thing, proceed to its assembly.

Back to the category

Build with sides

First of all, the fragments of plywood need to be sick and clean their edges. With templates are transferred to the material patterns for drinking. The starting holes are drilled by a drill, patterns are cut out the lobsik.

If the casket decorates openwork components, they must be additionally handled, rid of the heads, take off chamfer.

Before starting the assembly, you need to cut all the details.

Collective bowl with sides. It is possible to restrict ourselves to the adhesive connection of the elements, but it is better to increase its reliability using nails or brackets. The bottom is attached to the frame, metal loops are fixed with self-draws. As soon as the cover is whatened, the finishing stage begins the box.

Its surface is again treated with sandpaper, the joints are grinding. This operation is produced with a dried putty. Then the box outside is processed by primer, on top of which paint or wood varnish are applied. If you need to make a casket in a vintage style, giving it an artificial impelling effect, cracker is added to the paint.

Back to the category

Decoration of the casket

The technology of decoupage of the finished thing is quite simple. The box is covered with decorative napkins, lacquer is applied to its surface. In the last stage of work, various fittings are fixed. The inner part of the thing is grinding, lacquered or finished with satin or velvet cloth. As elements of the external decoration of things today are popular rhinestones and beads. The ones decorated with satin ribbons The plywood box is considered an equally stylish element of the decor, as well as decorated with seashells and marine pebbles. If you need a trend bowl in retro style, black and white copies of ancient photographs are glued to the external side.

moyafanera.ru.

drawings, how to make a carved cover, assembly instructions, photos and video lessons, price

Plywood sheets of various thicknesses are almost perfect material for the manufacture of a variety of decorative elements. Having mastered the skills of working with this material, you can do different shelves, frames, boxes for storing small things, etc. At the same time, each product will be given a unique appearance, since plywood is processed simply and without the use of complex tools.

In the article, we will tell you how to make a small plywood box, but the technique used for this operations can also be applicable for other home decor items.

Do it with your own hands can each