How to make houses for wall clock. Training hours of cardboard do it yourself. Interesting wall clock options

Karina Moroz | 11.11.2015 | 9456.

Karina Moroz 11/09/2015 9456

Brought up the ordinary interior? We share ideas as you can decorate any room with unusual watchesMade with your own hands.

Happy hours do not observe. However, decorative wall Clock Can become not only an excellent addition to any interior, but also an original gift.

You will need a clock mechanism (you can buy in a special store or extract from old hours), any flat object for creating a dial and a little fantasy.

This idea will have to do creative people.

You will need:

• domino;
• strong glue;
• clockwork;
• metal sieve for sticking noodles;
• line;
• ballpoint pen, marker or pencil.

1. Wash the sieve thoroughly and dry.

2. With the help of a ruler and handle, mark the place where the domino bones should be located. Stick them to the sieve and leave until complete drying.

3. Set the clockwork as it is indicated in the instructions on its packaging.

Adjust the time on the clock and hang them on the wall.

2. Wall clock from vinyl record

You will need:

• clockwork;
• vinyl record.

In the center vinyl record Make a hole. FROM back side Attach the mechanism, and with the front-arrow.

Vinyl record can be given unusual shape. To do this, it is necessary to put it in a preheated oven for a few minutes, then get any shape with a melted plate with the help of kitchen skewers and "blind".

3. Clock with floral motif

If you failed to get a clockwork, you can creatively remake old wooden watches.

You will need:

• wooden wall clock;
• acrylic paint for wooden surfaces;
• brush;
• glue-spray;
• rhinestones or beads;
• printed colored pattern with a vegetable motive (instead you can use beautiful packaging paper or a piece of wallpaper).

1. Unscrew the clockwork.

2. Scroll the edge of the dial of color acrylic paint. Wait until it dries.

3. Put the dial on the drawing with a floral motive and circle the circuit of the clock. Then cut the circle a little smaller than the dial.

Hey! Remember how you taught your kids to count the time that it can be measured using seconds, minutes, etc.; And what is a special device for this. Or maybe you still have to tell about all this your crumbs? Then I will tell you one very acting method. You need to make the watch together with your own hands for children from cardboard. The time of work can be devoted to what to tell a fairy tale about short seconds, seeking only forward minutes and such a huge watch that seems to last infinitely, especially in the kids. Yes I. creative work It will not remain without a trap, the karapubuz develops, doing it.

Ideas

What to hide for modern man Although big, even small wrapper is important. Even the same candy may seem tastier if it is wrapped in a fantasy with a favorite film meter, and not to the parchment. Therefore, the learning process should be packaged in a beautiful wrapper: use your favorite Lego men, cars, stickers, printing super heroes, all that your child likes, what he is willing to watch the clock, with which he is ready to even sleep.

Or do it in the form of a bracelet in the form of a bracelet, I think this option will also appreciate the kids.

Regarding the training system - choose the one that in your opinion is more understandable to your baby and which you can present "not staring". Someone makes a watch, like real no minutes, someone hides a minute under the leaf so that you can "pry". Someone, on the contrary, makes a double dial, where the clocks and minutes are clearly visible and minutes and even arrows go to their circle, clearly pointing to the figure. And someone makes the clock with the task - stick on the velcro the corresponding number of minutes and even at the bottom can be postponed with individual numbers what happened (for example 10:30). Of course, it is more convenient to do such a watch with a felt, although it is possible to stick to the velcro cardboard. The main idea!

And you can improve the usual homemade hours - stick the numbers in a circle for quick learning.

In short, what are we still talking about? It's time to do business! We have a master class universal, basic, which you can take the basis for your idea on your nose.

Step-by-step instructions for the manufacture of cardboard

Now we will try together to do under the tree. But before, just a few words about the tools that we will make, and satisfying child care.

Several important points:

• We have to cut out of paper of the workpiece, and for this you will need sharp scissors. If you have scissors with rounded edges, then this part of the work can be trusted to the baby. Otherwise, it is better, but rather, safer, it is to do it.
• To make the arrows on the design, we will again need a sharp object: whether manicure scissors with sharp edges, or a nail. Total 3 holes. But security is more important. If the crumb will ask, of course, you can entrust work, but only with your safety net.
• Decide how strong the construction you plan to do. Perhaps one sheet of cardboard will be not enough. Then use the basis. A layer of packaging thick cardboard comes down as a basis, or several additional balls from the usual one.
• Last - how you will draw, or rather, with the help of what. If the circular, then you have already marked the middle, and it is good. But dangerous due to acute edge. You can draw, circle a plate, a cup or a bowl along the office. In this case, the sequence is determined using two perpendicular lines. Or, even easier, one of the circles (better not the very first to preserve its attractive look) bend 2 times in half. The bend point is the middle.

Now we are completely ready! Forward!

Clock with Minutes - MK

The cork round stand is selected as the clock base. But you can completely do and corrugated cardboard.

Step-by-step photos of manufacture:

Templates for printing - increase by clicking

No need to have special knowledge to understand how the mechanism of the clock is arranged. Probably, in every house there will be old Chinese clock with an even working mechanism. It can be useful to you when creating original wall clocks personally. The clock in the understanding of a person has some kind of mystical power. After all, they have special function - Being a control link.

Watch creation own hands Under the power of any housewife. It may take only a little imagination, and a certain amount of time to create this decor element. As a result, such hours will be attracting the place of your interior. It is necessary to proceed from the fact that the dial can serve anything. Most importantly, such hours must be original and beautiful.

One of the creation options can be round board, I used to serve as a cable coil. In this case, the designer, not paying attention to the main purpose of the coil, saw stencil inscriptions and a middle hole as a basis for the dial homemade watch. If you design a travel agency or a geographical bias room with a special option for creating a clock will be using the Globus halves. Such hours will take not enough space on the wall, but in any case it is worth it. In the kitchen, you can use the option of clocks with buttons. Numbers on the dial. Such watches will create the effect of a grandmother's chest with old things. Complex, but quite unusual will be a clock-ball. Here you need to take a bright ball and curved arrow. Similar wall clocks will look like a real time machine from fantastic films. To create the clock-picture, you will need to take any, you like the picture you like and adapt it to show time.

Strict Living Room or Cabinet Style suitable option Watches decorated on a chessboard. In this case, elegance, rigor and accuracy in the room are provided. Use the tree as the basis of your homemake hours, and as arrows you can take thin twigs. It turns out natural and environmentally friendly clean option Wall clock. Melomanians and music lovers have the right to life figures, carved from old, not necessary records. It will be very creative decoration hours. If you still decided to hang clock, then make sure that they are visible from anywhere in the room, and you will always be aware that the hour is at the moment.

Comfort and comfort in our house sometimes even from the smallest details and elements. Even most of the interior designers converge in thought that the most important attributes for obtaining comfort in the house are competently chosen curtains, original lamps, soft and selected in the right shade, blankets, pillows, bathroom mats and watches.

In this article, it's just a master class, how to decorate the clock at home yourself.

On the Internet is available a large number of photo hours, most of them are made by famous designers, but do original watch At home is also not difficult.

There are, of course, one key and difficult moment is the installation on the clock of the mechanism for its operation, but the finished mechanism should be bought in the store and install already according to the instructions. But the appearance of future hours and its rest is fully depends on personal preferences and tastes.

Several minutes modern technicianthat help yourself run hours in any style.

Style of clock decoupage

Such equipment design and creating wall clock implies work with a ready-made shop template, where there is already a blank, the basis of the arrows and the finished mechanism. You can also purchase ready-made patterns on the papers, special paints, glue and other decoupage elements.

The workpiece under the clock is done in this way: several times the foundation is covered with soil from acrylic paints, and in the end we grind. The desired tint and invoice is attached to the next step.

There is one reception - if you want to fulfill the clock in the old style with a tint, representing the hint, then the paint must be applied with a sponge.

Decorate the wall clock with your own hands is the process of identifying fantasy and creative from a person. The basis can be placed special water stickers. Or to draw a preliminary sketch and translate it to the dial.

After already attach the finished mechanism and arrows with numbers. After a number of actions, the clock created by their own hands will be revived, and will give the house a special original look.

Quilling watches

Quilling is a process of decorative and applied art, which should work with straight strips from multicolored paper Various widths. Such strips are usually twisted and glued to the surface, while creating the most variable drawings and pictures.

To create a clock with the help of this technique, the clock is best taken to take a tree, as it is good for it to stick the elements of the queen.

The color scheme must be harmonized with the interior of the room. After all, bright hours will look ugly in the room performed in the style of minimalism. Therefore, the choice of shade is key moment in this case.

Most often, multicolored fusion elements are used when creating flowers, insects, trees, animals, berries, and so on.

Watch from plaster

Conventional plaster tiles will serve as the basis for future hours.

Romantic and strap natures will definitely find a large number of solutions to create from this material of the clock.

Among the professionals, such a tile is called a medallion. The mechanism of future hours is attached to its back side. In order for the product more sophisticated and restrained its surface of matte paint light tones.

And if I want some glare, then the glossy paint will fit.

Note!

Such material is most suitable for creating watches in the bedroom. At the same time, the shades are chosen - beige, gentle pink, pearl, coffee color with milk, purple and so on.

Watches with wooden sticks

In this situation in your arsenal there must be such objects as sticks and high quality tree, good glue, scissors, and ready-made working hours with a flat surface.

From wood, cut a lot of small sticks of the same size, and then connect them

If the wands are based on the basis of two layers, you can achieve an excellent "explosion" effect, which looks luxurious and original.

Now you know how to make hours at home. Clock handmade Ideal for both the kitchen and the hall, and for the bedroom.

Note!

Photo clock do it yourself

Note!

Such an interesting I. modern design The clock will definitely not meet in the store. Simple design From quite available materials. If your guests see you with this watch, they will definitely turn on them, and they will not definitely tell you what they saw the same in the next store.
Materials that I took for hours:

• Wooden board 35 x 35 cm, 18 mm thick (construction store).
• A piece of plywood with a thickness of 3 mm (construction store).
• Nails with a length of 13 mm or screws.
• Clock mechanism (you can take from the annoying hours).
• Yellow paint.
• Black marker.

Tools on the tree that I used:

• Hand saw.
• Screwdriver drill.
• A hammer.
• Pliers.
• Line.
• Direct corner line.
• Bit.
• Sandpaper.

Saw the board.

We take our board and are determined with the size of the future hours. Draw and unscrew the base with hacksaw or manual saw. 18 mm board is well seen and desirable to use a saw with small teeth so that the edges are smooth and the minimum mechanical restoration After dipping.

Making squares

Next, on one of the corners of the base, I discharged 10 x 5 cm rectangles. Drank them step. Then these rectangles have already cut 5 x 5 cm squares.
Now it is necessary to polish all the squares, removing burrs, and making the surface smooth.

We proceed with the milling of the opening under the mechanism of the clock.
We take the mechanism of the clock and apply it to the center of our foundation. We supply a pencil. Next by milling recess. I used the car cutter fixed in the screwdriver. You can use the chisel and has done a deepening with it.
While working in trying to deepen the mechanism. If everything is fine in the horse drills a hole for the output of the shaft, to which the arrows will dress. After all work performed, we proceed emery paper The basis for it is smooth.

Assembling watch

Before proceeding directly to the clock assembly, it is pre-prepare 18 small jumpers - connectors. Take a piece of plywood and with the help of a hacksaw drink 18 jumpers 0.7 x 4 cm.
We have a base, spread our squares in almost chaotic order. It is necessary to position the squares so that jumpers from plywood have been practically not visible. From the reverse side, respectively, connect all jumpers and nails.

Paint clock

For painting, I used the paint-aerosol of the canister. Hold the ballon at a distance of 20 cm and spray on the clock, on the one hand. Some weather, and the paint dries very quickly, turn the clock and spray paint on the second side. Everything, the basis is almost ready.

Draw numbers

I took a black permanent marker and simply painted numbers. There is another option - print the numbers on the computer, cut and glue. So you can do it, if you want.

Hanger for watch

I screwed 2 screws to have a watch to hang on. And the rope tied to the self-drawing so that you could hang on a nail in the wall or self-tapping screw.