How to make the table with your own hands from the boards. How to make a round table: ideas, materials, step-by-step instructions, photos and videos. How to make a kitchen table from chipboard

Cottage is definitely the place where you want to relax from the urban fuss, breathe fresh air and just drink fragrant herbal tea on the veranda behind the table made to the cottage with your own hands. Such a table will not only give a special charm of such a simple ceremony, but also will be the subject of pride for you and your loved ones.

Option 1. Table on legs

Choosing materials for the table, first of all, you should pay attention to the quality of wood - not all tree is suitable for use. Coniferous rocks, such as spruce and pine, pine pine and easy to work, but such a material without appropriate processing more fuel, and the secured resins can spoil the tablecloth.

Large breeds (aspen, oak, ash) are more winning, products of them are durable, durable and have an attractive appearance.

Wood breed	Brinell hardness)	Density (kg / m3)	Stability	Trends in color change
Birch	3,0	600	average	the color becomes deeper
Larch	2,6	500	good	acquires shades of gray
European oak	3,7	700	good	the color becomes deeper
	4,0	700	average	from light to straw, yellowish brown
Pear	3,3	680	average	blushet
Cherry	3,0	580	good	from light pink to a deep reddish shade

Materials and tools

For the internal arrangement of cottages and country houses are more acceptable long narrow, allowing you to easily move around the room. This should be considered, harvesting everything you need and designing the table itself.

For the table, it is preferable to use a board with a thickness of at least 30 mm. Such thickness will ensure the strength of the table and the ability to withstand heavy loads. The optimal length ranges in the range of 150-200 cm. You can purchase two finished wooden shields of 30-2000 mm in size.

Balaasins or wooden bars for legs.Figure balasins will give a homemade table production chic and a luxurious view. And for the manufacture of legs of a bar, you need to choose the boards with a minimum cross section of 50x50 mm. The convenient height of the table is provided with a leg height of approximately 73-75 cm.

Other materials and tools.

Boards 20 mm thick and 8-10 cm wide for tabletop frame.
Wood putty.
Screwdriver and self-tapping screws by 30 and 50 mm.
Emery paper of various grainies, as well as holder.
Clamps for fixing legs and countertops.
Electric drill.
Sander.
Building level.
Corolnic
Roulette or centimeter.
Marker.
Glue.

Prices for various types of construction bar

Bar construction

Stages of manufacture

When preparing materials, all boards and bars are processed by a planer, grinding or coarse sandpaper to remove irregularities, remnants of cut bitch, clean the cracks. Boards must be smooth and smooth, so they are polished from all sides, including ends, ribs and corners.

If it is supposed to make a solid shield without gaps, then it is better to purchase rounded materials - this will create a stronger clutch of a single canvase and save time for fitting elements. From the ribs of bars for the legs are cut by chamfer.

Assembling frame for table top

The frame contributes to strengthening the strength and stability of the table, its dimensions are completely dependent on the parameters of the countertop, but there are several general rules: and in length, and in the width of the frame should be less than a tabletop by 30-25 cm.

Video - Garden table with your own hands

The frame itself is assembled from 4 boards forming an external frame, and 6 internal transverse slats. The boards are installed on a rib at a right angle with the help of a square and are tightened with a 50 mm self-pressing. The joints are predefined with glue (PVA or carbon monoxide). To prevent the split boards, you can drill the guide holes and only after that screwed screws.

The frame length of the frame is made marked for transverse slats, and guides are drilled. It is very important that the crossings were strictly perpendicular to both sides of the frame frame. The ends of the transverse slats are wedged with glue, and the whole design is fixed by self-drawing. Ensure that the heads of the screws do not protrude, but were completely "drowning" in the wood.

Rama table (manufacturer)

Boards Countertops are connected, aligned with a tape measure and stacked on the floor of the face down, the frame is placed on top so that the transverse strips are tightly lying on the worktop. In the planks, the guides for the self-tapping screws are drilled, and all elements are tightened with screws by 30 mm. On each transverse board accounts for 5-6 self-tapping screws.

Collection of feet table

The tabletop stacked on the workbench or several stools for the subsequent installation of the legs. The feet of the table is fixed in the corner of the frame of the clashes, and the guides are drilled in the frame.

Before fastening the legs on the ends of the bar, glue is applied - it will save the table from loosening and will contribute to greater strength. It is recommended to fix the leg on each side by four screws, but at will you can additionally use metal corners. Round balasins are fixed with long self-drawing with the front side of the table, and square on the corner fasteners.

Prices for popular models of screwdrivers

Screwdrivers

Finish

After installing the legs, the table turns over and put on the floor. Depending on the design of the table with a jigsaw along the radius, the angles are unscrewed or the end is completely curved. With the edges of the countertops, you can cut the chamfold and grind everything carefully.

If necessary, scratches and cracks, which come in the course of work, close in wood. Screws are better not to touch the opportunity to pull the design.

After final grinding from the table, all dust and chips are removed, and the product itself is covered with a veneer or several layers of varnish.

Beautiful and unusually watch tables with elements of decoupage decor or single painting. But it is not worth hiding the beauty of natural wood under the layer of paint, modern varnishes and impregnations will fulfill all the necessary work on protecting the product from moisture.

Video - table on legs for giving

Option 2. Table of stump

An unusual and non-standard way to equip the nursery is to create interior items from natural materials. When refining the territory, old or threatening trees often spire. If there is something like this tree in your country, then definitely there will be no problems with searching for a suitable stump. If the idea came spontaneously, then it is possible to look for the necessary peneck on cutting down, in the nearest forest or to ask the owners of neighboring sites.

Materials and tools

For the manufacture of such a fantasy table of stumps, it takes quite a bit:

wood for countertops, recommended table top thickness from 20 mm, when choosing boards, you need to follow the rule "The more countertop, the greater the cutting board";
stump. For work, the dried stump of any breed of wood will be required, the main thing is that the wood is a whole, not rejected and not rotten. If the tree drinks took place recently, then the pennies must be dried. And it is better to do it by placing a stump into a warm dry room or outdoors during sunny weather. It should be remembered that a few weeks - the term is insufficient for high-quality drying. As a rule, the whole process takes at least two months. It is possible to determine the condition of the wood by ease of the bark of the bark - if the bark moves without effort, then you can proceed to work;
water-based wood varnish natural shade or transparent. It is such a composition that the texture and dignity of natural wood will be emphasized;
sandpaper of various grain and holder;
planer or grinding machine;
chisel;
building level;
roulette;
hammer and nails;
screwdriver and self-tapping screws;
abrasive fiber.

Stages of manufacture

Stage 1.

The dried blank of the future table should be cleaned from the bark. For this stage, a chisel or chisel will be useful. It is necessary to remove the bark extremely carefully and gently so as not to damage the wood and prevent the appearance of cracks and splits. All soft and rotten areas also need to be removed.

Stage 2.

After the bark was removed, the stump should be aligned relative to the horizontal plane. To do this, with the help of a level, a smooth surface is prepared, and the base of the future table is set.

If the curvature is observed, the disadvantages are eliminated by the ruble. At the same stage of the work of the work, the knobs and all unnecessary parts are unscrewed with knife and all unnecessary parts, the sections are then stitched.

Stage 3.

The stump aligned in the level is polished by a disk grinding machine, especially its horizontal parts. Stump sidewalls are also grinding, and hard-to-reach places are treated with coarse sandpaper. This is a rather laborious process that requires considerable time.

Stage 4.

Cracks and deepening in the trunk must be cleaned from dirt and dirty with a chisel, after which it is doubled by half a (working layer) emery paper gently process them from the inside. The remains of wood dust are cleaned with a brush or a construction vacuum cleaner.

Stage 5.

To prevent disjection of the stump and ensure air circulation between the table and the floor, the bottom can be attached to the base of the furniture legs. The presence of legs make a more convenient movement of the table.

The legs can be chosen any: metal, furniture wheels or special rubberized stands. Bashed them best with the help of screws to the base of the stump, the amount is selected arbitrarily, based on the size of the table.

Stage 6.

After installing the legs, proceed to the crate of the top of the stump. To do this, they are perpendicular to the sidewalls perpendicular to two parallel planks, and on top of two more rows of holders - total 6 slats bonded with nails. This will be a frame for the table top.

Stage 7.

Prepared tabletop boards fasten from bottom with transverse boards. The table top can be the most diverse: round, rectangular, with rounded corners. The winner looks the option of a table with a round or oval countertop.

To give such a form, you can use the homemade device from the thread, pencil and nail: the end of the thread is tied up around the pencil, and the tip of the nail is placed in the middle of the table top, the selected radius outlining circle, after which everything is unnecessary, and the edges and the surface of the countertops are processed by grinding machine.

Step 8.

Holes and defects of boards can be reeded finely with brilliant shiny stones, bay them with varnish and finishing after drying once more grinding to smooth the surface.

The finished countertop is recorded from the bottom on the cutter on the holders on nails or selected according to samples.

The finished table is covered with varnish in several layers. After applying the first layer, the product is carefully dry and treated with fine-grained emery paper. This will prevent lacquer peeling, and the subsequent layers will be smaller.

After removal of dust, the second and subsequent layers of varnish without grouting are applied. Optionally, after drying, the last layer can be treated with abrasive fiber - it will remove excessive shine and give the surface of the mattness.

Such a creative table will decorate any veranda, especially in a pleasant frame from green bushes or flower beds.

Prices for paintwork materials

paints and varnishes

Video - Table for giving with your hands from stump

Beech - quite often used by manufacturers of furniture, as this is a solid breed, which is quite plastic and durable. For strength, the beech is not inferior to the oak. In comparison with the oak, the beech is cheaper. The color of such wood can be from reddish-brown to pinkish yellow.

has high decorative qualities;
dries quickly;
easy to handle.

afraid of humidity;
poor polished.

Oak is a solid breed with high strength indicators. The natural color of oak stretches from yellowish white to yellowish brown with a light shade of gray or green. Oak has a number of advantages - very easy to use, easily subjected to gluing, almost does not rot and has a beautiful appearance.

despite the high viscosity of the wood, processed quite well;
easily light;
resistant to rot;
it is well amenable to techniques for artificial aging.

price;

Wooden rock is more solid than oak. Wood color light and gently golden. Most often it is used in the manufacture of bent and carved furniture or as a facing veneer.

perfectly bend after steaming;
little cracks during drying;
when discoloration acquires an unusual shade of seeds.

in humidity conditions, wood is rapidly damaged by wormwort;
poor polished.

Aspen is a deciduous tree. It refers to the genus of the poplars. It is a very large tree, it grows up to 30 meters in height and may well reach a thickness of 1 meter. Since it grows very quickly, the woods from it turns out a lot.

very large moisture resistance;
the ability to maintain heat, but not to give it;
bactericidality (you can put such furniture in the children's room, without fear that it will damage).

not very presentable appearance;
the possibility of darkening, both partly and completely;
it is necessary to fear that from the inside the product can start rotting.

Pine is a soft-breed tree, which is most often used in the manufacture of frames to soft or body furniture. The main advantage of this type of wood is high resistance to rotting, humidity and temperature drops. In addition, Pine is one of the most common and affordable materials.

convenience in processing;
easily bonds;
a pleasant healing smell that highlights phytoncides.

easily scratched and damaged.

The interior of any apartment, at home or cottages is absolutely impossible to imagine without such an important element as the table.

And although it does not seem to be a difficult task of choosing a table of any size, forms, designs and design solutions in the furniture salon, still more interesting to make it with their own hands.

First, it is much more economical, and secondly, you will not only enjoy the creation process, but also guaranteed to achieve the desired result - forms and dimensions, ideally suitable for your premises. Consider the process of owning the array of wood.

First of all, you need to decide on the objectives.

Council. The choice of breed for the table top will depend on which functions will perform your table, as far as it should be durable and what the characteristics of the structure and color should have.

Pine, spruce, alder. The main advantage of these wood varieties is their low cost. In addition, they have a uniform structure, and, accordingly, are very easily processed. However, the margin of strength is not very high.

Oak, Beech. These are options with the most durable wood. If in priority you have durability, then the optimal choice will be oak.

It looks very beautiful in the context, and the table top from the oak will be very heavy. In this case, the cost of material is relatively high. Beech is also characterized by high strength, it is somewhat cheaper than oak, but practically does not have a relief pattern.

Ash. According to the structure, there is practically no oak, although it looks not so luxurious. The main advantage is a variety of color palette.

Birch, larch. Also representatives of solid wood. The processing of them is somewhat more complicated, but moisture resistance and strength are at the highest level.

Drawings

Many people think that the presence of a drawing in the manufacture of the table is not at all mandatory. But still, in order to avoid inconsistencies between the future of the finished product, the intended goals, it is better to spend some time and secure yourself. The construction of the drawing is necessary at least for two reasons:

When you decided to make the table, you, of course, think in advance about what functions it will perform and where it will be placed. Gabarits. And the table shape is definitely determined on the basis of the presence of free space. But besides, you need to take into account such nuances as a comfortable space under the table table, the distance from the chair to the wall, etc. In order to organically enter your table in the interior of the room and ensure maximum functionality, you need to have a clear idea of \u200b\u200bits size. And in this matter without a drawing can not do.
In addition, although at first glance table and is not a very complex design, the probability of mistaken in the manufacture of any part, yet, exists. To prevent this, just use the drawing - visually reflected on the paper components indicating all sizes.

Council. If you do not have a certain experience in drawing, you can always pick up a ready drawing on the Internet. In this case, you will only have to change some parameters that configure it for the features you need and interior conditions.

Instruments

In order not to be distracted while working on the permanent search for the necessary primary means, the entire tool is to prepare and decompose in advance. Approximate list What you can come in handy, looks like this:

Manufacture

Important. Before the start of any carpentry work, it is necessary to prepare wood: carefully pollute and treat all the antiseptic all surfaces: the tabletop from the array, the frameworks for the frame, the stands of the table.

Making framework. The frame is a rectangular base that connects to the worktop and serves to fasten and stabilize the legs.

I turn over the tabletop and measure several centimeters horizontally and vertically from the corner of worktops inland. We make the same marks on the other three corners of the table top. Marks should be at the same distance from the corners;
Draw connective lines. As a result, a rectangle (or square, depending on the table top shape), inscribed in the center of the table;
Cut off four pieces of wood so that their dimensions exactly coincide with the lines drawn on the underside;
We glue the frame to the tabletop and put the clips. To enhance the design, in addition to gluing, the framework should be screwed.

Making legs. For this, we make four bars of the same length specified in the drawing. We glue the legs to the frame and the countertop so that in the compounds of the leg-frame and the leg-tabletop there is no empty space. We leave for some time on drying and fix the legs with self-draws at a sharp angle to the surface of the board.
After the completion of the main works proceed to processing. It is necessary to ease manually all sharp facets of table tops and legs. Then evenly applied varnish on the entire design. The transparent or color varnish will not only protect the table from the unwanted effects of external factors, such as moisture, but also emphasize the natural pattern of the tree. It will be very impressive, if you paint some parts of the paint table.

Sometimes, in order to increase the wear resistance of your product or give the table a brighter appearance, a surface lacate (or color) reused.

In this case, it should be remembered that the second layer of varnish or paint can be applied only after complete drying of the previous layer. It's not worth a hurry, it is better to wait a few extra watches, but to be sure that you will not spoil almost the finished table.

first time after varnishing and painting, try to avoid entering the surface of moisture and direct sunlight;
even after full lacquer drying, do not leave the table on the street in the rain or at low temperatures;
follow the cleanliness of the surface, process it in a timely manner with special cleaning agents, polishing periodically.

Photo

You can make a resulting result in the style of the following photos:

Useful video

Excellent example showing all stages of the process, you can see next video:

Conclusion

Based on the foregoing, it can be concluded that it's not so difficult to make a wooden table. Especially if we tend to an option with an already ready-made tabletop from a wood array, because In this case, the "front of work" is significantly reduced.

In contact with

Wooden street table for giving is quite possible to make it yourself. This uses ready or independently developed drawings. To make a beautiful tree table yourself for use on the street, you need to purchase high-quality material, and comply with the rules of manufacture.

Beautiful and comfortable country table - an indispensable attribute of summer holiday. When choosing a finished product, you need to determine the sizes as well the following parameters:

using the object of furniture outdoors or indoors;
the maximum number of people capable of placing at the table;
the budget allocated for the purchase.

The tabletop and the building of the street object of furniture can be made of different types of material:

plastic models are an ideal option for exploitation at the cottage. Advantages are in the available cost, relative compactness and ease. As a rule, round or oval form are produced, and allow you to place about six to eight people. Despite the stylish appearance, it is not characterized by too long service life. The disadvantages include the tendency to destruction as a result of the negative impact of direct sunlight. Also, a lightweight design can turn over with strong wind gusts, the need to be used to install the maximum smooth surface and damage exposure, which is accompanied by a rapid loss of the initial aesthetic appearance;

wood models Very organically look even in a modern summer landscape. Such furniture items perfectly complement garden plantings. Such models are categorized enough. By cons of natural wood include the ability to collapse and be carried out under the influence of water and temperature drops, and the legs depressed into the soil may rot, therefore it is required to regularly process with antiseptics;
elegant metal models Different quality and incredible durability. This furniture is particularly beautiful on the background of forged fences and decor elements. Such tables are consistent with considerable weight, as well as very high cost. Very often modern models are a very successful combination of metal with wooden or glass countertops.

If it is planned to use the table in summer conditions yearly, the optimal option will be a metal structure, which is very resistant to any unfavorable external factors. The legs of the metal design can even be concreted, which will betray additional stability to the object of furniture.

How to make a wooden table for giving with your own hands

Tables made of wooden boards are very often manufactured independently. Of course, this option will require sufficient care throughout the entire period of operation, but will allow you to give a bright style and originality in the country. Among other things, you can build the simplest models with your own hands with minor time and money costs even in the absence of professional skills and special tools.

Making the drawing of the table with sizes

The scheme of self-assembly may be ready, but to get the original table with the most suitable size and table top, you need to draw the drawing yourself. When drawing up the drawing, it is recommended to focus on the standard dimensions of such an object of cottage furniture 178x95x77.5 cm.

Required tools and materials

To make a beautiful and practical tree table for cottages, need to prepare:

roulette;
pencil;
saw
drill or screwdriver;
building level.

Work is necessarily carried out in standard protective glasses and mittens. In the manufacture you need to use building materials presented:

pair of boards with dimensions of 85x10x2.5 cm;
pair of boards with dimensions 153x10x2.5 cm
four boards with dimensions 168x10x2.5 cm;
four boards with 75x10x5 cm sizes;
board 95x10x2.5 cm - 17 pcs;
fixing tools in the form of nails, screws and bolts;
glue for woodwork.

It is also necessary to prepare antiseptic compositions in advance for wood processing, wood varnish or special paint and brushes.

How to make the table do it yourself (video)

Getting Started: Production of Wooden Street Table Parts

All elements in the form of wooden boards must be smooth, natural humidity, from high-quality wood solid rocks. If necessary, the boards must be aligned before carrying out the assembly, and if necessary, their grinding. To get a durable design, you should make careful processing of wood with antiseptics.

It is not recommended to soak wood with oil compositionswhich has proven themselves in operation in conditions of high humidity, but increase the level of flammability and give the designs an unpleasant and sufficiently stable smell that remains for a long time. After applying water-soluble impregnations, it is recommended to apply a layer of a special lesing antiseptic that allows you to give high decorative properties of a product and promoting additional protection.

Assembly and fasteners of the main elements

At the first stage of independent manufacture of a wooden street country table, a frame base of the furniture object is assembled. It is to the framework that the boards will be fixed to create countertops and, as well as the stands of the table. The frame base traditionally consists of four sharply and even longitudinal boards having a size of 168x10x2.5 cm and a pair of endboards with dimensions of 85x10x2.5 cm.

The assembly must be carried out on the maximum smooth surface, fixing the end elements to the longitudinal boards with galvanized screws and adhesive composition. Very important Do not allow the base of the base in the process of assembly and fastening. After checking on the diagonal, additional boards 153x10x2.5 cm are necessarily recorded, which will allow to give the resulting design to the additional rigidity, and also hide the sections of the feet of the legs.

The countertop is assembled from the board with dimensions of 95x10x2.5 cm. Fixation of boards can be produced both galvanized nails and self-draws. Be sure to leave a gap between the table top elements at 0.5 cm. The legs are mounted using self-tapping screws or bolted compound. The second option is more preferable and allows you to get a removable model, convenient for transportation and storage.

Installing amplifiers - Warranty of durability

If there is a need to get the most massive and durable design, the amplifiers are used. To install such details, it is necessary to flip the product up with legs. Transverse amplifiers in the middle of the countertops are nailed, and the angles of amplifiers are spilled in order to save space. A pair of figure cut amplifiers, which repeats the shape of the worktop, is nailed to the sidewalls.

How to protect the table from external factors

Adverse weather conditions represented by the sun, rain and temperature drops are an aggressive medium for a wooden structure, operated in the conditions of the street. To protect the wooden products and extend their service life, special film coatings and a variety of impregnating compositions are applied. Polyurethane protective films are most often used. The disadvantage of such a film coverage is the loss of appearance, reduced efficiency and wear after the expiration of a certain time. Impregnations for wood protection are represented by a mixture based on oils and solutions of repetuents. And the other option of protection against external adverse factors has proven itself well, but requires periodic updates.

Wooden street table: drawing (video)

We make a wooden country table from what's hand

As a material for creating a wooden cottage table, a variety of remedies are very often used. Incredibly stylish and very reliable tables from the slab - an option that can be made independently in the presence of some skills of working with wood. In this case, you need to be prepared for the fact that the technique of manufacturing tabletop based on sleeps is characterized by characteristic specificity and quite laborious, but the resulting finished product will be unique and unique.

Very original in garden design looks construction:

from a wooden bar for real fans of natural materials;
from several stumps or bobbins;
from old window frames with a glass countertop;
from boxes supplemented by various decorative elements;
from an old wooden chest with forged elements.

Tables created from pallets were also quite widespread. Fashion for such products came from Asia, where similar furniture furniture is very often manufactured for the absence of free funds. When creating this option, you can show all your fantasy, but it is very desirable to replace nails from pallets to the self-tapping screw, And all the fastenings of the frame and boards must be reinforced with special furniture corners. If you wish, you can add the design by conventional furniture wheels, allowing you to make the table mobile and convenient to operate.

How to make a metal table with a wooden table top

One of the interesting and durable options for garden furniture. For self-making, you will need:

metal pipe or high-quality metal rolling of sufficient section;
primer for work with metal surfaces;
paint in the metal surface and brushes;
chalk or light marker;
smooth surface for stencil;
wooden table top;
bruks and adhesive composition for fastening table tops.

The tool can be represented by a welding machine, a grinder, saw for metal, hammer, screwdriver, self-drawing and bolts. The metal is pre-cleaned from rust and contaminants using a steel brush, after which the frame is created according to the stencil.

Welding should be taken carefully to prevent the formation of welding growths. The metal brush is cleaned with the whole design, after which the primer processing and staining is performed. After full, the paint is complete, the tabletop is recorded, which also needs to be treated with special antiseptics, after which it is covered with varnish or paint.

Table of logs do it yourself (video)

Independent production of cottage furniture from wood is a very interesting and creative process, affordable even beginners. Such natural material is perfectly combined with metal, glass, and plastic, which allows you to create original, unusual and very decorative solutions.

It is difficult to overestimate the value of the table, both in terms of household comfort - and any interior design of an apartment or cottage. Moreover, the kitchen without a table loses its functionality, so the table is deservedly considered the necessary object of furnishing of this room. A huge selection of various models of tables that can be purchased in furniture salons, does not diminish the desires of some of us to make the table from the boards with their own hands - in their own project, possessing individuality and charm of a valuable handmade style.

Special beauty perspective personally make the table from the boards, gives the fact that the model, the form of the countertops and dimensions can be chosen anyone - if only they were convenient and fit for the room in which the table will be installed.

The several examples below will help you determine the choice and help in making a suitable model. In addition, drawings How to make a simple table from boards, will help to more clearly present the future design and assembly processes.

Table 1. Strong and steady dining table for home

For the manufacture of this table, we will need tools such as an electrolovka, an electric drill, a screwdriver, grinding. Of course, it is possible to do without some of the above "helpers", taking advantage of a screwdriver and brue with eathed paper fortified on it - just such a replacement will cause an increase in time and forces spent on the manufacture of the table.

Material for the manufacture of countertops - a tipped board, a thickness of at least 30 mm. The spool provides a dense board of boards, increasing the life of the table, since with such a docking method, the likelihood of food residues in the gaps between the boards is practically excluded.

For the manufacture of other elements of the table, an ordinary 50 millimeter board takes.

Boards, if they are not processed, it is necessary to span well - in addition to aesthetic considerations, it requires elementary safety and practicality: the sump is easier to paint, and the paints for such a surface requires much less;
Cut table details:

Table top braces, 230 cm long - 6 pcs.;
Spacer board with a length of about 170 cm;
Bars for fastening countertops (the length of them should match the width of the table top, or be slightly less) - 4 pcs.;
Bars for legs - 4 pcs., 2 cuts cuts for their base.

All items cover the layer of varnish and let them dry;

Tightly connect tabletop boards with each other (Fig. 1);

Across the boards to attach 4 brus with self-testers, placing them evenly along the entire length of the table top and retreating from its end by 20-30 cm (Fig. 2);

To improve the type of product, the ends of the fastening bars should be cut down at an angle of 45 degrees, the discovers of the extreme boards gently cut off, and the corners of the table tops are slightly rounded with a jigsaw.

Using a template and jigsaw, put the same configuration to the legs, as shown in the figure below;

Reliable fastening of the legs is performed in three stages: first we attach the legs to the extreme transverse bars connecting the countertop boards; Then connect the legs with a spacer beam (Fig. 3). Finally fix the legs from above, through the worktop;

We impose the baseboards on the lower parts of the legs and securely fix them (Fig. 4);

It remains to cover all parts of the table with another layer of varnish and let him dry well.

Table 2. The simplest table for giving or gazebo

Perhaps there is nothing easier than making this version of the table from the boards with your own hands, depicted in photo 5. Table dimensions: 1200x740 mm, height - 750 mm.

For its manufacture, you will need:

Edged board, smoothly across 40x140 mm;
2 bar 40x60x740 mm;
8 confirmates 70-75 mm long; selflessness of various lengths;
Chisel and planer;
Electrolovka, drill with a special drill for configmatics, furniture key, grinding.

The first step - we collect a worktop, bonding the boards with two transverse bars, placing them at a distance of 120 mm from both ends of the future tabletop and taking advantage for this with self-draws, up to 80-85 mm long (in order not to reach the outer surface of the countertop). If conventional boards are used, in the manufacture of the table, it is better to leave small, just 10 mm between them, the gaps of the same width: end-to-end slots will prevent the contamination of the table tops with the residues of food, without interfering with cleaning and without reducing its aesthetic appeal.

To achieve the same width of the gaps in the tabletop, it is necessary during its assembly to lay between the boards a centimeter standard made from the rail, or other solid material.

Second step: assembling table legs. On a sheet of chipboard or plywood, draw a template - a rectangle with the sides of 600mm (width) and 690 mm (length). First we make one pair of legs, then in the same way - the second: 2Deople put on the template X-figurative, mark the lines of the upper and lower sections of the legs, as well as the lines of their intersection - in this place the boards will be fastened with each other. We cut off the ends of the boards on the outlined lines, and in the places of the crossing of the chisel, we choose the removal of a depth of 20 mm, for the connection "in Polterev". Tighten your legs using 35 mm screws;

T Reta Step - Final assembly of the table. The drawing shows it in detail how to make this simple table from the planks: thanks to him, the assembly process will not cause difficulties (Figure 6).

Wood is the most traditional material from which you can make the table. Moreover, the work is suitable for both high-quality raw materials and various boards, trimming, spins, even stumps. A little fantasy, labor, and you will turn the disadvantages in dignity with your own hands. After all, the tables can be the most different: for home, summer cottages, for the garden, journal, large dining, very tiny - for gazebo, others. Drawings, schemes, photos, detailed descriptions will easily cope.

Family lunch space

It is not necessary to spend a lot of money to do something needed, useful. If there are boards, racks of different sizes left from previous works, you can try to make it easily a decent dining table or a small decorative table. They will have a place at the cottage, in the city apartment.

Materials and tools for making dining table

9 boards or bars from poplar wood 0.35х0.35х90 cm;
a piece of plywood 20 mm thick with parameters 140x260 cm;
2 poplar boards 1.8x3,5х250 cm;

4 clusters of 70 cm (table legs);
3 BROUSE 90 cm (share part of the frame);
4 bars 45 cm (transverse framework parts);

trimming 20 mm boards of different parameters and plywood of the same density;
self-tapping screw;
nails;
glue;
morilka (optional), furniture varnish.

This list can be adjusted depending on what you have.

You should also prepare:

desktop circular saw;
fantasy saw;
electric drill;
device for countersunk screwing screws;
machine for grinding wooden surfaces;
roulette, square;
pencil.

The drawings simply and clearly show the way of connecting parts. Carefully read the image.

At the cottage or in the garden it is not without special furniture. It should be simple, reliable, stable. By doing with your own hands, the table is from the boards, do not forget to leave free space between the parts forming the worktop. This will allow street furniture to serve you longer - water during the rain will not be assembled and stifled on the surface, but quickly stalks.

Prepare for work

You should prepare materials and tools:

2 boards of 85x10x2.5 cm;
4 boards 168x10x2.5 cm;
17 boards of 95x10x2.5 cm;
2 boards at 1530x10x2.5 cm;
4 boards 75x10x2.5 cm;
screws, bolts, nails;
adhesive for wood;
level, roulette;
screwdriver or drill;
saw
protective mittens, glasses;
pencil;
moriquet, paint.

Consider the proposed drawings, the manufacturer, methods for fastening the elements of the wooden table.

The table will be collected with his own hands after you screw the legs. This can be done on a self-tapping screw.
Finishing finish is done at the discretion of the wizard. Processing of the finished product by Morilka, varnish, paint will make wood more resistant to the effects of destructive external factors: sun, rain, wind, etc.

A small, but very original table will not leave indifferent neither the owners or their guests. In the afternoon, it will be a place for a cozy feast, and in the evening - will be amazed with a bizarre glow. To make it, you will need not sophisticated drawings, but only the original idea and desire.

What do you need?

3 boards with cracks of the marsh cypress (or any other, similar to the texture, tree);
ready metal legs for the table;
epoxy resin;
photoluminescent paint or dry powder;
polyuritan paint;
adhesive tape;
carpentry glue;
grinding machine;
strokes;
clamps;
carpentry glue.

New, made with your own hands the table gives you the pleasure of your exotic beauty.