Wooden phone stand project. DIY wood phone stand. Choosing quality material

Try to cut out such a craft. Your loved ones will surely like it by placing it in a conspicuous place, for example, on a shelf. To make such a craft, you will need the following:

Sawing tools.

Preparing your desktop

First of all, you need to prepare your table on which you will work. There should be no unnecessary things on it and every tool should be at hand. Not everyone has their own desktop and probably already thought about creating one. Making a table is not difficult - it is difficult to choose a place for it in the house. The ideal option is an insulated balcony, on which you can complete your craft at any time. I already wrote about preparing the table in a separate article and tried to describe the entire process of creating it in as much detail as possible. If you do not know how to prepare your workplace, then read the next Article. After you have completed the process of creating a table, try to start choosing your future crafts.

Choosing quality material

The main material is plywood. Her choice is always difficult. Each of us has probably faced such a problem as peeling plywood from the end part and asked the question, what is the delamination from? Well, of course, this is mainly due to low-quality plywood. If this is not the first time you have taken the jigsaw in your hands, then you can pick up plywood from the remnants of the previous craft. If you are new to sawing and you do not have plywood, then buy it at a hardware store. It is always difficult to choose material for cutting. You should always choose plywood carefully, more often look at wood defects (knots, cracks) and draw conclusions. The difficulty in choosing plywood lies in the fact that no matter how miscalculated its defects and shelf life. For example, you bought plywood, cleaned it, translated the drawing, and suddenly it began to delaminate. Of course, this happened to almost everyone and it's oh, how unpleasant. So it is better to pay attention when choosing and choose good plywood. I wrote a special Article in which all the principles of choosing plywood are described step by step.

Plywood stripping

We clean our plywood with sandpaper. As you already know, "Medium-grained" and "Fine-grained" skin is used to clean plywood in cutting. In hardware stores, you probably saw skins (in another way, sandpaper), it is they that we need. In work you will need "Coarse-grained", "Medium-grained" and "Fine-grained" skin. Each of them has its own property, but completely different spraying, in which it is classified. "Coarse" skin is used for processing coarse plywood, i.e. which has a lot of defects, chips, as well as cracks.
“Medium-grain” skin is used for processing plywood after “Coarse” skin and has a slight dusting. "Fine-grained" or otherwise "Nulevka". This sandpaper serves as the final peeling process for plywood. It gives the plywood a smooth feel, and therefore the plywood will be pleasant to the touch. Sand the harvested plywood in stages, starting with medium-grained and ending with fine emery. Sand along the layers, not across. A well-sanded surface should be even, perfectly smooth, glossy in the light and silky to the touch. How best to prepare plywood for cutting and which sandpaper is better to choose Read here. After stripping, check the plywood for burrs and slight irregularities. If there are no visible defects, then you can proceed to the process of translating the drawing.

Drawing translation

For me, translation of a drawing has always been the main process in my work. I will tell you a couple of rules, as well as tips for a high-quality translation of a drawing. Many people translate the drawing onto plywood not only with a pencil and copying, but also with the help of "Black Ribbon", glue the drawing with plywood, then wash off the drawing with water and the drawing markings remain on the plywood. In general, there are many ways, but I will tell you about the most common way. To transfer a drawing to prepared plywood, you must use a copy, a ruler, a sharp pencil and a non-writing pen. Fix the drawing in plywood using buttons or just hold it with your left hand. Check if the drawing fits the dimensions. Arrange the clock drawing so that you can use a sheet of plywood as economically as possible. Translate the drawing with a non-writing pen and ruler. There is no need to rush, because your future craft depends on the drawing.

We drill holes in the details

As you have already noticed, there are parts of the grooves in the details that need to be cut out from the inside. To cut out such parts, you need to drill holes in them using a hand drill or, as in the old fashioned way, make holes with an awl. By the way, the hole diameter must be at least 1 mm, otherwise you can damage the elements of the drawing, which, alas, sometimes are difficult to restore. In order not to damage your work table when drilling holes, place a plank under the workpiece so as not to damage the work table. Drilling holes alone is always difficult and therefore ask a friend to help you in your business.

Sawing out parts

There are many rules for cutting, but you need to base on the most common ones. The first step is to cut out the inner parts, only then along the outer pattern. There is no need to rush when cutting. The main thing is to always keep the jigsaw straight at a 90 degree angle when cutting. Saw parts along the lines you marked exactly. The jigsaw must always move evenly up and down. Also, do not forget to monitor your posture. Try to avoid bevels and irregularities. If you get off the line while cutting, don't worry. Such bevels, irregularities can be removed using flat files or "Coarse" sandpaper.

Relaxation

We often get tired when sawing. Fingers and eyes, which are always tense, often get tired. During work, of course, everyone gets tired. In order to reduce the load, you need to do a couple of exercises. Exercises you can see here. Do the exercises several times in the process.

Cleaning Parts

You should always carefully clean up the details of a future craft. At the very beginning of work, you already cleaned the plywood with sandpaper. Now you have a small part of plywood stripping. Use a medium-grain sandpaper to clean the edges of the parts and the back of the plywood. "Fine-grained" skin is considered the final stage of cleaning parts. It is better to clean the front of the parts with a fine sandpaper. Take your time when processing plywood. You can also use a rounded file, with which it is convenient to clean the inside of the holes. Try to get the details without burrs and unevenness.

Assembling parts

Assembling the parts of our craft is not so difficult here. In order to carry out the correct assembly of parts, you need to read the following Article, which describes in detail all the details of the assembly. After the parts are assembled into one common craft without any problems, then proceed to gluing them.

We glue the details

It is necessary to glue the shelf parts using PVA or titan glue. You don't need to pour a lot of glue. It is better to tie the assembled craft with glue with a strong thread, tighten and put to dry. The craft is glued together for about 10-15 minutes.

Burning crafts

To decorate our craft with a pattern (for example, along the edges of the craft), you will need an electric burner. It can be very difficult to burn a pattern beautifully. To burn out the patterns, you must first draw the pattern with a pencil. You can read how to work with the electric burner and add patterns to the shelf here.

Varnishing crafts

If you wish, you can transform our craft by covering it with varnish "Woodwork" is better colorless. Read how best to varnish the craft. Try to choose a quality varnish. Perform varnishing with a special “For glue” brush. Do not hurry. Try not to leave visible streaks or scratches on the craft.

Mobile phones have become a part of our daily life. Even children have already used them from the very first grades of school. In order not to throw your gadget just on the table, consider how to make a phone stand from scrap materials.

First option: from binders

Let's figure out how to make a do-it-yourself phone stand from what is in almost every home. There are quite a few ways. In this workshop, we will make it from binders (paper clips).

This model is well suited for widescreen phones. It will turn out to be very convenient and practical, and it will take literally two minutes to create.

To work, you need binders and a suction cup.

Manufacturing procedure:

Connect the binder to the suction cup (a towel holder is also suitable) in the place where the hook is located.
Attach the back of your phone to this suction cup when you need to put it down, and you're done.

The advantage of this type is that the phone can be positioned in any position, both horizontally and vertically, or at an angle.

Second option: from paper

When you have a lot of pieces of paper of different colors at hand, the modular origami technique comes to mind. Let's figure out how to make a phone stand out of paper.

To work, you need 24 white checkmarks and 23 pink ones. Check marks are the simplest element of modular origami.

To make modules, follow these steps:

The triangular module is folded from rectangles so that they turn out to be the same size, take an A4 sheet and cut it into 16 or 32 small rectangles.
Fold the rectangle in half.
And again in half, then unfold to form a fold line in the middle.
Bend the edges of the rectangle to this line, and those where the first fold line goes.
You have a ledge from below, bend its corners up to the edge of the first part.
Now bend the rest of the lower fabric upward to form an even triangle on the back side.
Fold it in half. And you will see that you have pockets on both sides.

Now we turn to our question, how to make a phone stand from the following modules:

Fasten the white check marks in a circle.
Then place the pink ones between each pair. This will create a tapering cone.
Continue assembling the structure to the desired height and you're done.

This method is suitable for those who like to work with paper using the modular origami technique, if you are more fond of cutting and pasting everything, then pay attention to the following model.

Third option: from a shampoo bottle

How to make a do-it-yourself phone stand from a shampoo bottle? The work will turn out to be very stylish, despite the simple materials, it will look expensive, as if purchased.

Manufacturing progress:

Find the right sized shampoo bottle.
Make a line in the middle and cut along it. For convenience, it is better to do not straight, but leave a ledge with a slot on the back side, so that you can not only install the stand on the table, but also hang it on the wall.
Take a nice ornamental paper (you can use wrapping paper), wrap it around the stand and glue it.
Carefully trim the excess wrapper around the outline. Your work is ready.

This craft will look great in your home, especially if you choose the right color and pattern of the wrapping paper. You can independently come up with a form for such work or make it according to a sample. This was one of many ways to make a phone stand.

Fourth option: from popsicle sticks

One of the most original ways to make a phone stand is to use popsicle sticks. To do this, ask friends and relatives in advance not to throw out such sticks.

When you collect enough, you will need to glue them together:

make the bottom first;
then the backrest along the height of the phone;
the side ones will look good at an angle.

You can connect the parts not only with glue, but also by gluing a transverse stick for greater strength.

There are many ways to make a phone stand out of scrap materials. We've covered just a few of them. It all depends on your mood and imagination. Even from the old Lego constructor, you can make a wonderful option or sew a wonderful wall cover from dense fabric.

Use any idea. Enjoy your creativity!

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge variety on store shelves and on the Internet. Often, an ordinary holder, case and other gadgets to give a mobile device character and style are far from cheap. Therefore, a do-it-yourself phone stand is an excellent solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques to help everyone do what they like best. So you should turn on your imagination and use all the ideas.

What can be used to make a stand for a mobile?

Creating something on your own provides ample opportunities for creativity. A do-it-yourself phone stand can be made of the following materials:

paper;
wood;
plastic;
gypsum;
any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories you have, the more interesting your mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY phone stand made of paper

It would seem that what can be done from ordinary sheets of paper? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white, which will then be painted;
multi-colored gouache, watercolor or acrylic paint;
glue;
a ruler for measurements;
simple pencil;
scissors;
various decorative ornaments that will be appropriate are also worth keeping close at hand.

A well-organized space will help make sure that your phone stand will be decorated with your own hands in a matter of minutes. Consequently, the person who implemented it will have an excellent opportunity to become the owner of a beautiful and convenient mobile accessory.

Sequencing:

First you need to figure out what shape the stand will be.
After that, you need to draw templates of the required sizes on a sheet.
Elements for the product are cut out along them.
Then, carefully, according to a diagram that was previously drawn or printed from some site, we glue the necessary details.
After that, you should wait until all the elements are fixed.
The next step is to connect the individual parts to each other.
Let all fasteners dry. After that, you can start decorating the product. At this stage, you can use various sparkles, buttons, beads and other small beautiful elements.
After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile, because it will always be in its place.

DIY wood phone stand

There are many options that you can use to translate any idea into reality. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, sketches and ideas alone are not enough. In this case, you will also need:

special equipment;
skills;
the ability to work with wood.

Before you make a do-it-yourself phone stand, you should analyze your actions. If you have not previously worked with a tree, then it is better to rely on a paper phone holder. And if you have experience, then for work you need to prepare:

the tree from which the structure will be built;
tools for working with wood;
product diagram;
a felt-tip pen that can be used to draw on wood;
ruler;
glue;
accessories (buttons, beads, rivets);
simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product.
Then it is required to put marks on a wooden base, along which the connector will be cut out in the future.
The next step is to cut out the shape with the existing tool.
Then it is necessary to carry out control measurements and find out if the mobile phone fits into the cut-out slot.
After that, you need to glue the prepared parts.
The next step is to smooth the product. This can be done with a file or a special device powered by the mains.
When the surface is smooth, you can paint the finished shape with some color.
After staining, you must wait for the product to dry.
The work is completed by gluing the accessories chosen for this mission.
At the end, the completely finished structure should be opened with varnish, which will add shine and aesthetics.

In general, making a wooden phone stand will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand that you have created with your own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth seeing what interesting accessories there are at home. It can be:

seashells;
buttons;
rhinestones;
beads;
foil;
colored tape.

In general, everything that is at hand and has an unusual look can come in handy in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

If you get used to it, you can not only use such a product for yourself, but also donate it. Therefore, it is worth making a few spare coasters: suddenly someone suddenly invites you to visit, and there will be nothing to give! And a stand for a mobile phone will always come in handy, even if a person already has one, then the second will never hurt.

It is impossible to imagine a person who does not have a mobile ...

Now it is almost impossible to imagine a person who would not have such a technical device as a mobile phone.

With the invention of this technique, life has become much easier: if you need to make an urgent call, the phone is always with you, besides this, it is also much easier to find someone ... In general, it makes no sense to describe all the advantages of a mobile phone, since they are really obvious and do not need advertising.

However, today, when we talk about mobile phones, we most often mean modern smartphones, which, in addition to ordinary calls, are capable of performing a lot of different functions. A modern phone can instantly access the Internet and find the information you need there, receive and send emails, take stunning photos and videos of great quality, etc. That is why we most often use the phone not as a means of communication, but also as a multifunctional gadget.

It is for this reason that you always want your phone to be always at hand, in the field of maximum availability. In addition, sometimes you need to view photos or videos on your phone, so you want it to be located in the most convenient way for this.

In order to satisfy all these needs, one must, of course, use mobile phone stand... Today in stores you can find a lot of accessories of various shapes. So, for example, many probably remember the popular phone stands in the form of a woman's hand a few years ago. Nowadays, the stands have become not only more attractive and elegant, but also functional. They are capable of charging the phone's battery, informing about a call, tilting the phone for viewing from a variety of angles, etc. So everyone, even the most discerning and demanding consumer, will always be able to purchase a product to their liking.

DIY mobile phone stand

However, if you prefer hand-made things that will be a real exclusive, we will tell you how you can make your own attractive phone stand... To do this, there are many different ways, but we will tell you about the simplest, and at the same time, unusual.

DIY mobile phone stand - 1

The first option is perfect for a phone with a wide display and a fairly long body, such as an iPhone or any phone from the Samsung line. The stand is incredibly comfortable to use and truly functional. You only need 2 minutes of your time to make it.

You need a binder (a kind of clip that is used to hold papers together), as well as a suction cup, which is used to attach, for example, towel holders. So, attach the binder to the suction cup where the hook is. Voila! A simple and convenient stand is ready.
Attach the suction cup to the back of the phone (don't be afraid, it won't damage it and leave no traces when detached) and position the phone as you like, vertically or horizontally, in any case the viewing angle will be ideal.

DIY mobile phone stand - 2

The second option is suitable for truly creative people. In order to do it, you need to master the art of origami.

To make such a stand, you need to make 24 white checkmarks and 23 pink ones. Check marks are made in the same way as cranes.
Then the white check marks are fastened in a circle so that, as a result, a kind of circle is formed. Insert one pink checkmark between each pair. Thus, you get a tapering cone upward.
Continue construction to the desired height. Place your mobile phone in the center, and feel free to admire the creation of your own hands!

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories also appeared ...

From Masterweb

30.05.2017 20:57

What can be used to make a stand for a mobile?

Creating something on your own provides ample opportunities for creativity. A do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; plaster; any natural materials. In general, you can use all the materials that are at hand. The more intricate accessories you have, the more interesting your mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY phone stand made of paper

colorful paper or white, which will then be painted; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments that will be appropriate are also worth keeping at hand.

First you need to figure out what shape the stand will be. After you need to draw templates of the required size on a sheet of paper. Elements for the product are cut out on them. Then carefully, according to the scheme that was previously drawn or printed from some website, we glue the necessary parts. After that, follow wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, you can use various sparkles, buttons, beads and other small beautiful elements. After decorating, the phone stand can be considered a ready-made stand. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile, because it will always be in its place.

DIY wood phone stand

special equipment; skills; ability to work with wood. Before you make a do-it-yourself phone stand, you should analyze your actions. If you have not previously worked with a tree, then it is better to rely on a paper phone holder. And if you have experience, then for work you need to prepare:

wood from which the structure will be built; tools for working with wood; product diagram; felt-tip pen, which can be used to draw on wood; ruler; glue; accessories (buttons, beads, rivets); a simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product. Then you need to put marks on a wooden base, according to which the connector will be cut out in the future. The next step is to cut out the shape with the existing tool. Then you need to take control measurements and find out if the mobile phone fits into the cut out connector. After that, you need to glue the prepared parts. The next step is to smooth the product. This can be done with a file or a special device powered by the mains. When the surface is smooth, you can paint the finished shape with some color. After painting, you must wait for the product to dry. The work is completed by gluing the accessories chosen for this mission. At the end of the completely finished structure follows open with varnish, which will give shine and aesthetics. In general, making a wooden phone stand will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand that you have created with your own hands.

Beautiful design of the phone stand

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has an unusual look can come in handy in the process of making a phone stand.