Original lamps from various bottles with your own hands (3 MK). How to make a lamp from a bottle? The procedure for making a lamp from a bottle with your own hands

DIY lamps have a lot of advantages. They are cheap, or rather, almost for nothing, they look original, you can choose a design to your liking. In addition, the very process of creating a beautiful chandelier or table lamp is fascinating. We will present you with photo examples for inspiration.

We wrote that glass bottles can be used to make a fence for a flower bed and even build walls of a house. Empty wine bottles and containers for other types of alcohol are not only suitable for this. Lamps made from them are very attractive.

The easiest way to create such a decorative lighting device is to use LED strips and garlands placed inside the bottle. Of course, many will think that the decor will turn out to be too New Year's, but this is not so. It all depends on how you decorate the bottle itself.

Important! Working with glass bottles requires caution, given that making a fixture will require drilling a hole or cutting off the bottom.

If it is decided to make a chandelier out of bottles, you can take an old lamp as a basis. Or just hang the bottles, for example, on a beautiful wooden block. There are options for using both identical bottles and completely different ones, on a wire of different lengths - the field for experiments is very wide.

Glass bottles are also used to create table lamps. In this case, the decor inside the bottle-holder for the lampshade can be changed depending on the mood - in summer, for example, shells, in winter - Christmas tree tinsel.

Lamps made of bottles are also suitable for outdoor use. True, in this case, plastic containers are often taken.

And if you absolutely do not want to mess with electricity, you can turn ordinary bottles into beautiful candlesticks.

Home decoration is a difficult and responsible task that you can cope with on your own. The peculiarity is that some interior items can be created with your own hands. So, lamps are integral interior items that are used to illuminate a room as a whole or a separate area. The store offers a wide range of such products. But there are master classes on how to make a lamp with your own hands from a bottle. And now we will show them to you! :)

How to make a chandelier (master class!)

The main lighting fixture of the house is a chandelier. It can be made from a regular glass bottle. The main thing is that it will be exclusive.

To create such beauty you will need:

bottles (size and quantity depends on the preferences of the owners);
protective equipment (goggles, mask and gloves);
glass cutter and sandpaper;
screwdriver and wire.

Having the necessary tools and materials at hand, you can proceed to the direct manufacture of the chandelier:

1. Soak a bottle in water... This will make it easy to remove labels and debris. After cleaning, the container must be thoroughly dried.

We wash bottles and remove labels

2. Cut the bottle... The glass cutter is set at the required level. Cutting is carried out slowly, which will allow you to get a straight cut line. Always wear protective clothing when working with the cutter. If you do not have the necessary tools at hand, then cutting a glass bottle can be easily done with a thread. The video below clearly demonstrates this.

We cut the bottle

3. Now the bottle is placed under the tap... We turn on hot water and hold the workpiece under it. Hot water is alternated with cold water. As a result of sudden changes in temperature, the unnecessary piece will fall off exactly along the cut line.

Processing glass under water

4. The cut is processed sandpaper. The cut should be flat and smooth.

Sanding the edges

5.Use a screwdriver to disassemble the lamp. The wire must be carefully pulled out and passed through the neck, assemble the lamp back and check it in operation.

Stretching the wire through the bottle

6. It remains only to decorate the lighting fixture. For this, ordinary wire is used. Starting from the neck, we wind it around the bottle. For this, any material is used. It can be regular black or colored wire.

Decorating the bottle

The chandelier suspension is ready. It only remains to install it. If desired, the product can be painted and given any design. The main thing is that it is organically combined with the interior of the room.

Glass bottle chandelier ready

A good solution would be to use a glass stone. It should be borne in mind that the light transmission of the product will decrease somewhat. For decoration, a stone of various shades is used. Several shades can be combined. The main thing is that the lamp looks organic.

Decorating bottles with glass stones

The stones are attached to the glass with glue. The luminaire can only be used after it is completely dry. This will take no more than a day. Complete drying of the glue will ensure reliable adhesion of the stone to the surface. It is better to use an adhesive that can withstand temperature changes.

In the video: how to cut a glass bottle with thread

Table lamp (master class!)

A glass bottle is the perfect material for creating a table lamp in a bedroom or living room.

For this you will need:

a bottle of the appropriate shape and size;
diamond drill;
shade;
screwdriver;
Remedies;
old towel;
patch;
Wire with a socket.

Making a lamp from a bottle with your own hands is carried out in the following sequence:

Mark a hole on the workpiece through which the wire will pass. Stick the plaster on the mark.
Place the bottle on an old towel and drill a hole for the wire. Drilling is carried out with a diamond drill. The work is carried out in protective equipment.
Soak the finished bottle in water and remove all stickers and dirt.
A wire is passed through the hole and stretched to the neck. At the exit, it connects to the cartridge.
Attach the cartridge and lampshade to the neck.

Work process

A homemade glass bottle table lamp is ready. It remains only to test it in operation. If desired, the product can be decorated and decorated. For this, various technologies and materials are used. Glass stones will become an original solution, especially if a glass chandelier is installed in the room, made using the previous master class.

Now you know how to make a lamp from a bottle. Most often, wine bottles are used for the manufacture of such devices. They come in various sizes and shapes. This allows you to build an exclusive item that will become a decoration for the room.

In the video: how to make a hole in a glass bottle

Luminaire made of plastic (MK)

Plastic bottles are also widely used for the manufacture of the lamp. The peculiarity of such a product lies in the ease of fastening and lightness. It is easy to make such a lamp from plastic bottles with your own hands. Today there are several technologies with the help of which original lighting devices are created. Let's start with a simple method.

To make a lamp you will need:

5 liter plastic bottle;
stationery knife;
glue;
disposable spoons.

Manufacturing process:

1.Using a knife the bottom is cut off... The cut should be straight. In the future, this will simplify the work with decoration.

Cut off the bottom of the bottle

2. Handles are cut from spoons... With the help of glue, the convex parts are glued to the workpiece. You need to start from the neck. Each subsequent row should go a little over the previous one.

In the modern world, lighting is indispensable. But store lamps do not always fit the idea of a home designer. The materials at hand will help to solve the problem. Without special material investments, wine and plastic bottles can make a beautiful and original lamp for any room. He will help make the interior unique.

Views

First you need to remember that the lamps are divided into several types:

desktop;
floor;
ceiling;
wall-mounted;
street;
portable.

Some of the luminaires are powered by the mains, so you will have to provide for the connection of the cord to the lamp. Some lamps will run on batteries. Lighting devices in the country can be powered by solar panels. And to create romance, you can use candles.

In addition, lamps for lamps are also different. And before making an electrical appliance, you should consider the issue of safety. Conventional incandescent bulbs get very hot, which means they don't need to be used near a plastic shade.

Safer LED lamps or strips, fluorescent lamps, fluorescent and neon bulbs.

Tabletop

Since the glass bottle is stable, it is more often used as a leg. The main problem with such lamps is to bring the cord to the light bulb. There are several ways to do this.

Hole in the wall

Close to the base on the wall of the bottle, you can make a hole for the cord to exit.

Before starting work, you need to clean and dry the bottle, mark the place for the hole. For further work, you will need a small amount of water, a piece of clay, a drill and a drill with a diamond crown. Clay must be glued to the place of the future hole. While drilling, you need to gradually pour water onto the clay so that the drill and the bottle do not overheat.

When the hole appears, remove the clay, sand the edge with sandpaper and wash the bottle again. After complete drying, a cord is pulled inside, to which the cartridge will be connected. The plug is attached to the other end of the cord and remains outside.

You can put small colored pebbles or garlands in a transparent bottle. This will hide the cord.

A cartridge is attached to the top of the wire, a light bulb is screwed in. A home-made or ready-made frame for the plafond is installed on the neck of the bottle.

Removing the bottom with a thread

Wool or natural twine is required. The thread is abundantly wetted with alcohol or gasoline. It needs to be wrapped in 2-3 layers around the bottle in the place where the cut should be. For further actions, you need a small container of cold water.

The bottle with alcoholized thread is taken in the hands in a horizontal position. The thread is set on fire, and the bottle is twisted around its own axis so that the combustion is slow. As soon as the thread burns out, the bottle must be sharply lowered into the water. The glass will crack from the temperature drop. But this does not always work out the first time.

The edge is sanded. Through the bottom of the bottle, a cord is placed inside with an outlet through the neck, a Christmas tree garland is beautifully placed over the entire bottle volume, or you can put a low lamp for which the bottle will be a shade.

In all cases, the cord must be flat and thin so that the bottle rests securely on the table.

From under the lampshade

The third option for supplying electricity is the simplest, but not always aesthetic. The lamp wire does not get inside at all. A plafond is attached to the neck, which hides a lamp holder and a wire. Thus, the cord goes directly from under the lampshade.

Lampshades are often made from plastic bottles.

Floor standing

Since a floor lamp is often a tall thing, additional materials will be needed: wood, wire, metal fittings.

The palm lamp is a brown plastic bottle mounted on a metal pole. The base will be a cross, decorated with green plastic "grass". Palm leaves are also cut from it. Coconut lamps can be glass beer bottles in the form of barrels, inside which are placed small LED lamps.

But the floor lamp can be just the floor one. Several plastic bottles need to be cut in half. Bells are cut from the top. You need to pass a white Christmas tree garland or LED strip through the neck and put the structure on the floor, bending it in a fancy shape. Such a lamp will provide diffused light and decorate the living room. You can also make a garland or floor lamp out of bottles.

When creating such a decor, the lamp can be coated with acrylic paint or colored plastic can be used.

Chandeliers

In a large room, a pendant wooden lamp with glass bottles, which are inserted into the holes of the wooden frame, will look great. It will take several wine bottles of dark or colored glass. Inside each is a cartridge with a light bulb and a lead-out wire. The entire structure is powered by one or more switches.

Glass bottles can be cut in half and the top can be used. The cord is pulled from the chandelier through the hole and the lamp holder is attached.

Such a shade for a chandelier will look even more interesting if the bottles are cut at an angle.

And if you manage to pick them up in the same color scheme, for example, yellow-orange-green, then it will be a very beautiful chandelier. A multi-arm chandelier can be built in the form of a ball or a trapezoid.

But the bottom of the glass bottles can be used in the form of glasses. You just need to melt the upper edge with a burner - and the glass is ready. By the way, it can be used as a candlestick.

Chandelier Ideas

But the ceiling light can also be made of plastic. Here are some ideas.

To implement an interesting option, you will need:

five-liter canister;
a large number of disposable spoons;
stationery knife;
hot glue gun (or liquid nails).

At a five-liter container, the bottom is cut off. The handles of all spoons are cut off, leaving about 1.5 cm each. Starting from the bottom row, the spoons are glued tightly to each other in a circle of the container. The next, higher row is glued so that the effect of scales is created. Thus, the bottle is completely pasted over.

The neck can be decorated with the same spoons, or you can use parts from an old chandelier. From below, a wire with a fitted cartridge is threaded through the bottleneck. It remains to connect the structure to the ceiling.

A ceiling lamp for a chandelier can be made either single from a large container, or 2-4 horns from smaller bottles.

bottle (s);
twine or colored thick threads;
PVA glue;
brush;
acrylic paints;
furniture varnish;
stationery knife.

The light bulb will be attached under the neck. We decide on the length of the plafond. Cut off the bottom of the plastic. The top of the container should be coated with plenty of glue and immediately wrapped tightly with twine. After the glue has completely dried, the twine can be painted with acrylic paints and varnished. But using colored threads, you don't have to paint the shade. If the threads are woolen, then you do not need to varnish them either.

Another idea - and again, for one or more shades. You will need:

bottle (s);
hot glue;
glass stones of different colors;
stationery knife.

The bottom of the container is cut off. The whole bottle is pasted over with pebbles. After about a day, you can install the cartridge and fix the plafond to the ceiling.

When making several of these shades, they can be hung at different levels.

Wall sconces

If the ceiling of the old sconce has broken, then it can be made from plastic bottles. To do this, you need to cut a large number of yellow, green, orange leaves. With the help of a wire, the leaves are woven around the lamp. A pleasant diffused light will appear in the room.

For an oriental-style room, a Chinese lantern above the bed is suitable.

To do this, a plastic even bottle must be cut from the throat to the bottom into very thin strips.
Pull the wire through the strips by hand from the bottom to the neck. The wire is fixed in such a way that the bottle is significantly lower than its height. The strips turned the container into a flashlight.
It remains to install a cartridge with an energy-saving light bulb through the strips and lead the wire through the neck.
It is enough to attach a beautiful hook to the wall and hang a wire on it, stretching it to the outlet. The wall light is ready.

Street lights

Beautiful and unusual lighting can be made with your own hands for a gazebo in a garden area.

To do this, you need a large glass bottle of dark glass with a hole along the length, about 2/3. Moreover, the hole may have uneven edges.

The bottle should be placed sideways in a decorative container filled with river sand. A cartridge with a cone-shaped lamp is placed horizontally inside the bottle.

With the help of shells, old coins, starfish, artificial algae, shiny elements, the bottle is decorated in such a way that both sand and small objects are inside the container. The bottle itself also needs to be partially drowned in the sand.

The wire to the outlet is passed through the countertop. Such a lamp will remind you of the sea and adventures. And if you also decorate the gazebo with a fishing net, the neighbors will be envious!

But if there is no electricity in the country, they will help out with candles. Ordinary thick candles should be covered with a colored glass bottle without a bottom. This will protect the fire from the wind.

Don't rush to throw away empty glass and plastic bottles. Many useful things in the household can be made of them. We invite you to learn how to make a lamp from a bottle.

Simple table lamp

To do this you will need:

a suitable glass bottle for wine, champagne, whiskey or cognac;
socket with an electrical cord, which has a socket and a switch;
ready-made lampshade;
bulb;
rubber stopper-stabilizer;
screwdriver.

The order of robots to create a table lamp-lamp:

Cut the rubber stopper so that it fits easily in the neck of the bottle (picture 1).
Screw the socket onto the plug and connect the wires (pictures 2 and 3).
Make an arc-mount to which the lampshade will be attached and screw in the light bulb (picture 4).
Insert the plug into the socket and turn on the lamp (picture 5).

A lamp from a bottle with your own hands is ready!

The principle is the same, but the design is different.

Another option for creating a table lamp, but different in execution and design.

Instructions: how to make lamps from bottles (photo below):

Take a glass bottle and make a round hole at the bottom, closer to the bottom, using a glass drill.
Make a hole in the plug and thread the electrical cord through it, and screw on the thread on one side.
Screw on the decorative cartridge.
Place the cord in the bottle and close the neck with the stopper.
Pull the cord out of the hole in the bottle.
Screw in the bulb.

The original bottle lamp is ready!

Pendant lights from bottles - detach the bottom

Such chandeliers will ideally fit into the interior of a kitchen, living room, bar, country house or cafe.

To make them, first you need to cut off the bottom of the bottle:

Take a woolen thread, solvent, bottle, lighter, sandpaper, bowl of ice water.
Cut a long piece of string and soak it in solvent.
Tie a few rounds of woolen thread around the bottle where you want to cut.
Take the bottle so that it is parallel to the ground and light the thread.
The bottle must be carefully scrolled around the axis for several minutes.
When the fire goes out, immediately immerse the bottle in ice water.
Detach the bottom carefully.
Grind the edges of the bottle with sandpaper.

Making a chandelier

When the bottom is cut off, you can start assembling the luminaire:

Take a cartridge or plug and insert it into the neck.
Connect the cord.
Screw in the bulb.
Hang a bottle lamp from the ceiling with a hook or make a special mount.

Thus, you can make lampshades instead of the usual chandeliers. To do this, simply measure the diameter of the bottle neck and see if it fits the size of the finished cartridge. If not, then cut off the neck in the same way as you got rid of the bottom of the bottle. Hang the finished plafond in place of the old one.

Possible luminaire design

It is not necessary to make a lamp from a regular bottle. It can be used as a basis for the implementation of interesting ideas and ideas.

Design options:

Paint the bottle with acrylic paint. You can draw a picture or make a stained glass window. A lot of lamps from bottles, of the same shape, but painted in different colors, look very beautiful.
You can wrap the bottle tightly with thread or yarn.
Cover the bottle and engrave.
If you are making a table lamp, then inside the bottle you can pour coffee beans, colored salt, seasonings, cereals, pasta, and so on. Such a lamp will not only fulfill its direct purpose, but also serve as an excellent decor for the kitchen.
Much more can be done.
If there are large perfume jars, then they will also serve as an excellent material for creating lamps.
To make a pendant light, it is not necessary to fix the socket or cork in the neck of the bottle. You can push the cord completely into the container, and place all the other parts under the narrow top. This bottle will look more like a lampshade. Only then you need to think carefully about fixing the electrical cord.

Lamps from garlands

Do you want a garland to decorate the room all year round, and not just for the New Year? This can be done very simply.

A master class on creating a glowing decor:

Find the right glass bottle, Christmas lights, sandpaper and drill.
Remove all labels from the bottle.
Secure the bottle and carefully drill a small hole at the bottom. The cord from the garland should pass freely through it. Work carefully, as it is very easy not only to injure yourself, but also to break the bottle.
Use sandpaper to smooth the edges of the hole so you don't get hurt later.
Push the garland into the bottle through the drilled hole. It is necessary to place the end where there is no plug and remote control for switching modes. Try to stick the garland so that it twists inside the bottle.

All is ready! If you wish, you can decorate the bottle somehow. For example, draw a picture, and attach a ribbon or bow to the neck.

Such a lamp is very safe, because nothing will melt from the garland.

Plastic lampshade

Some will say that such a lamp made from plastic bottles is unsafe and has an unaesthetic appearance. In urban conditions, this is true. But on the other hand, it is ideal for a gazebo in the country.

Master class: how to make a lamp from a plastic bottle with your own hands:

Prepare a cartridge with an electric cord and a switch, a light bulb (you need an LED, a housekeeper or a regular, but low power), a five-liter water tank, a glue gun, pliers, plastic spoons, a screwdriver, a construction knife.
Using pliers, bite off the handle completely from the spoon, leaving one oval part.
Cut the bottom off the baklag using a construction knife.
Connect to the network.
When it's ready, start gluing the spoons. The first row goes from below, and all subsequent ones overlap the previous ones a little.
In this way, paste over the entire bucklag.
Glue the spoons together, folding them one into one to make a ring.
Secure the cartridge and cord to the neck of the bottle.
Glue a spoon ring onto the neck.
Screw in the bulb.

The lamp shade is ready! If desired, it can be painted. In order for the paint to lay evenly, it is better to paint each spoon separately, and then paste over the backlag with them. It is most convenient to use spray paint. This way you will get less dirty and the layer will evenly fall on the surface of the spoons. Plus, it dries faster.

This time we will have Master Class for making plastic bottle lamps... Even from two plastic bottles. Everything is done quite simply with your own hands. As a result, we get an interesting, original and one might say a designer lamp.

We will need:

- plastic bottle for 5 liters
- a plastic bottle of shampoo
- sealant
- wires
- metal tube
- bulb
- paint on glass
- polymer clay

V These are the bottles we need.

Cut off about half of the 5 liter bottle.

Above, under the neck with a marker, make six serifs. Equidistant, of course.

Draw lines from these serifs vertically down.

With, draw a roughly similar pattern on the bottle. Try to keep it symmetrical.

At the bottom, where the drawing ends, we cut out the plastic along the contour of the drawing.

Now, according to the marked drawing, we apply the sealant with thin lines.

Below, where we just cut off the drawing along its contour, do not forget to go through with a sealant.

Leave the sealant to dry. After it is completely dry, cover it with silver or gold paint. We need to achieve a metallic effect.

Now it is desirable to fill the cavities with paint on the glass. Don't use one or two colors. Use three or more colors. The lamp will look richer and brighter.

Now we cut off the neck of the bottle. We needed it for the convenient application of sealant and paint. We held a bottle for him.

Now we start cutting a small bottle.

But first, cut an oval out of plywood or thick cardboard.

We make a hole in it in the middle. And we take two caps from such a small bottle and also make holes in them.

At the bottom of the bottle we make three holes in a line. We solder the lid to the bottom. The middle hole in the bottle and in the cap must match.

We insert a hollow metal tube.

We insert the bottle structure into a wooden oval.

We fix the bottom with a nut.

To hide the traces of the connection, cover everything with polymer clay.

We cover everything with golden paint or any paint that imitates metal.

We screw the bulb holder onto the top of the metal tube. We pass the wires just through the tube.
We now return to the top of the lamp. From above, where the bottle had a neck, we make such a cap.

In order for the upper part to stay on the lower one without additional fasteners, we make such a structure on a light bulb.

Then this structure is inserted into the cap on the top of the lamp. The photo shows a view from the inside of the lamp. Because there is polymer clay, everything will harden after a while.

So that is all. Plastic bottle lamp ready. Everything, as you can see, was done by hand.

Making a table lamp with your own hands is not difficult - the main thing is to show your imagination

Table lamps are the easiest lighting fixtures to install. Lightweight, compact, they can easily be placed on the bedside table, and on the coffee table, and on the windowsill. Despite the fact that the table lamp does not play the main role in the interior, with its functionality and decorativeness, it gives the room an atmosphere of home coziness and comfort.

A cut is made in each of the keys.

Then the key must be bent.

The key of the lower row clings to the two keys of the upper row.

In this way, continue to fasten the keys to the bottom ring of the base.

Children's lamp "Pineapple"

The interior design of a children's room for a girl can be decorated with an interesting pineapple-shaped lampshade. How to make a shade for such a table lamp? You will need plastic spoons, bright yellow and green acrylic paint, a plastic bottle and a base for a table lamp.

The bottom and top should be cut off from the bottle, a wire and a light bulb should be installed in it, and three vertical cuts should be made from the bottom. Then place the bottle with the notches on the base of the table lamp.

Now you should prepare the pineapple flakes. To do this, cut off the longest portion of each spoon. Paint the cut spoons on both sides with yellow paint and let them dry well. Further, in the workpiece from a plastic bottle, you need to make small cuts with a thin sharp knife. Insert spoons into these cuts, starting at the bottom and finishing at the top, narrow base of the bottle.

From another large plastic bottle, cut out the pieces for the leaves, paint them with green paint and, after they dry, attach the pineapple tail.

The Pineapple lamp is ready.

Ideas for decorating lampshades made of beads

Any skillfully made beadwork looks great. A beaded lampshade will look no less beautiful, which, when the light is on, will shine and sparkle, filling the room with multi-colored glare. There are a lot of options for its manufacture. For example, a similar lampshade can be created based on any cross-stitch pattern:

A little imagination and a handful of multi-colored beads - and the interior of the room will be decorated with such an original lamp:

How to make a table lamp from a bottle?

In order to make a table lamp from a bottle, you need to pick up a container of an original shape, preferably from a fairly expensive drink with high-quality glass.

First you need to drill a hole for the wires in the bottom of the bottle:

To do this, make a mark with a marker in the center of the bottom (use a ruler).
Next, you need a deep bucket of sand.
Fill the bottle with sand, turn it upside down by sticking the neck into the sand. This will balance the pressure on the glass during the drilling process and reduce the likelihood that it will crack.
The bottle should be immersed in the sand with rotating movements so that about 5 cm of the bottom remains on the surface.
Pour some water from the top to the bottom of the bottle and drill a hole in the center of the mark with a glass drill (0.95 cm) at minimum speed. During the drilling process, it is necessary to hold the drill vertically very evenly, practically without pressing down. While water will theoretically prevent glass dust from flying around, it is important to prevent it from getting into the eyes or respiratory tract. Therefore, it is imperative to wear a mask on your face and eyes.
It is very good if someone will help you, continuously pouring water onto the bottle with a thin stream.
After the hole is ready, its edges must be sanded to prevent the wire from being cut during the operation of the luminaire.
The same hole should be made in the bottle cork, having previously clamped it in a vice.

If the chosen bottle is not beautiful enough, you can decorate it with nail polish.

Now you need to take a sturdy lid from under the spice jar and drill a hole in its center. The edges of the hole should also be sanded.

Then you need to put the cover on the rod, and add a washer and nut on top to fix the cover-support. From above the bottle is put on with the base to the lid, with the neck up. The nut is tightened gently, securely fixing the structure.
Next, a hole is drilled on the spice jar and a power cord is passed through it, which is then threaded through the rod and brought up. Care must be taken not to twist the cord in the rod.
Now the cap of the base is threaded onto the cord and rod from above, the set screw is tightened tightly and the wire is tied to the knot.

The ends of the wire are stripped and the contacts on the cartridge are released (it is recommended to buy it with a switch). Then you should bend the ends of the wires, pass them through the clamp and tighten the screws on the base.
The cartridge is inserted into the cup on the bottle so that the wires go into the cup, and the bulb is screwed in.
For the finished lamp, you can choose a shade to your taste. You can plant it on a wire base.

Lamp in the technique of "Jute filigree" from a bottle

How to make such a table lamp from a bottle? Its lampshade is assembled on a form, which was used as a flower pot, from separate fragments of branches. To eliminate the gaps between them, in the process of work, connect them with various curls and leaves. The base-bottle made of blue glass is also decorated with the same elements. In addition, simple bleached jute, marbles and glass contour can be used to decorate it. An LED strip is ideal as a backlight, since this option will give the product brightness and, in addition, the LED strip is practically safe.

Jute and marbles can be purchased at specialty stores or ordered online.

It is necessary to prepare twigs, from which the lampshade will subsequently be assembled.

Shape the lampshade. The finished hat looks like this:

Decorate the base bottle.

The lower and upper parts of the lampshade look like this:

What materials would you use to decorate the lamp? Write your answer in

To create an original table lamp with your own hands, a variety of glass bottles are used, both from alcohol and from other products. The most important thing is that the shape of the bottle is unusual.

Table lamps not only look beautiful, but they are also an environmentally friendly way to recycle household waste. This lighting fixture is very similar.

A handmade table lamp will be a unique gift for a wine collector or brandy connoisseur. In this case, it is recommended to keep the labels on the bottles. And if you use bottles of oil or other "non-alcoholic" product for the lamp, then it will become a real gift for parents (mothers and grandmothers). In general, it is suitable for any connoisseur of handmade items.

As already mentioned in the text above, you can leave a branded sticker as a decoration, as well as fill the inner space of the bottle with multi-colored glass balls in accordance with the color scheme of your interior.

To create a table lamp with your own hands, you will need:
1. A beautiful bottle.
2. A set consisting of a socket, switch, cord and plug. You can use a ready-made kit, or you can purchase everything separately.
3. Diamond core bit.
4. A small lampshade, which can also be purchased ready-made or made by yourself.

As you can see from the kit, the costs are the lowest.

Step 1

The first step is to drill a hole in the bottle through which the power cord will then be passed. Perhaps this is the most responsible and difficult part of the work.

The place for drilling is selected on the side that will be located behind the luminaire during operation. Also, the hole for the power cord should be located as close to the base of the luminaire as possible.

Before starting work, it is necessary, by tilting the drill to the side, mark the place of drilling with the edge of the drill. This is necessary to prevent the drill from slipping on the bottle and ultimately causing harm. After that, you can proceed directly to the drilling process. It should be noted that the drilling site must be constantly watered. This will protect you from glass dust, which can be harmful to your health if it gets into your lungs. In addition, the water will prevent the glass from overheating and allow the difficult work to be completed to the end without damaging the glass bottle.

Don't forget about protective equipment such as gloves and goggles. Keep in mind that all drilling work is done at your own risk. The site site is not responsible for damage caused to your health in the process of manufacturing a table lamp.

The drilling process can take several minutes, it all depends on the quality and thickness of the glass. Be careful and patient for a clean and even cut.

If you still do not dare to do this work yourself, we recommend contacting glass cutting workshops. There, a master of his craft will cope with this task.

Step 2

Pass the power cord through the hole in the bottle. In this case, it is necessary to install a special rubber ring that will protect the power cord from rubbing against the edges of the bottle.

If you are using a separately purchased cord, switch, socket and socket, then after passing the power cord, fit all the elements together.

In the event that you have purchased a ready-made kit, you will have to cut the wire passing inside the switch in order to be able to pass the cord through the hole in the bottle. After you have passed the cord, we solder the wire in the place of the cut and assemble the switch.

Secure the cartridge to the neck of the bottle and do not connect the plug to the outlet until you finish creating the luminaire.

Step 3

The next step is to decorate the inner space of the bottle (see description at the beginning of the article), if there is such a desire. Paint the lampshade a color that matches the color of the bottle or the color of your room. Attach the lampshade to the socket.

Step 4

Install the bulb in the socket. A few words about choosing a light bulb. It is best to use it with low power or use LED. This requirement is based on the fact that you get as little heating of the lampshade as possible.

Without special costs, you can add a zest to your usual room interior and make the design unique. Not everyone has the money to throw away good, but boring things and buy new ones into the house, however, you can make changes to the interior of your room if you make a chandelier from plastic bottles with your own hands.

There are many options with which you can implement such an idea and create a unique element of the interior. In addition, if you especially like this occupation, you can make your own work out of a hobby, thanks to which you will earn, while doing what you like.

It is not so difficult to create a chandelier from plastic bottles - the main thing is that it will not take much of your time, and the results will surely please. To do this, you will need some blanks that you will use to create a unique piece for your home.

In addition, this option is a win-win if you make a chandelier from plastic bottles with your own hands.

Should you make a chandelier yourself?

In order to arrange your home correctly, you should pay attention to the lighting. It is very important to choose the right light source itself and its location, since even a simple lamp or chandelier can ruin the entire interior.

Many people wonder whether it is worth taking on such a business or is it easier to go to the store and buy a chandelier? This decor element is a common product, and in stores that specialize in the sale of such things, you can choose a chandelier to your taste, as well as for any interior style.

Those who like to stand out even in the smallest details should ask how to make a chandelier out of plastic bottles. Moreover, this a cheap and exclusive way to decorate any room in an apartment.

Decor options

One of the chandelier decor options that you can make yourself from bottles is colored plastic. The best option is plastic bottles of different or even dark colors: The chandelier will reflect too much light if it is made entirely of clear plastic bottles.

Important! If there are no colored plastic bottles at hand in large quantities, but only transparent ones, they can be repainted in the color that you like best.

Undoubtedly, the optimal and most suitable shape of the luminaire is a ball.

Blanks for crafts

If you decide to make chandeliers from plastic bottles, first you need to purchase blanks, as well as buy those elements with which you plan to decorate it. Details that can come in handy when creating a chandelier from plastic bottles are wire, satin, plastic, toys, artificial butterflies etc. You will also need wooden slats and wire as fastening: the whole chandelier will be held on such a frame.

Important! Think over every little thing. You can even draw a sketch and several design options for the chandelier in order to choose the best one. This will save you time and effort, and it will also help you better understand what exactly you want to see in your room and what will look better in the overall interior.

Petal chandelier

Materials needed to create a chandelier from plastic bottles
In order for you to get to create a chandelier from plastic bottles with your own hands, you will need to prepare:

clean plastic bottles (peeled from stickers);
nail scissors;
a new light bulb and possibly a socket;
blowtorch;
wire (you need a thin and thick one);
soldering iron;
regular scissors;
gloves for hand protection;
chandelier frame.

First you need to cut off the top of the bottles, then cut the resulting ring. This will make it more convenient to cut sheets of them. For, to make the edges more beautiful and neat, use not ordinary scissors, but manicure: the work is rather painstaking. After that, you need to process the ends of the resulting leaves with a blowtorch.

Remember! It is very important to use protective gloves to avoid scalding or injury when preparing chandelier leaflets from plastic bottles.

To create a visual effect of naturalness, it is worth heating the front side with a blowtorch and at the moment when the leaf heats up well, you can make veins on it with a knife.

You can choose the shape of the sheets yourself. The leaves look the most beautiful, which are similar in shape to maple..

After all the leaves have been prepared, you can proceed to the stage of attaching them to the frame. Cut the thin wire into small pieces. After that, take a leaf and melt its back side. While it's hot, glue a wire to it. After this work done, you should get full-fledged leaflets with chopsticks.

In the next step, you will need a large, long wire so that the leaves can be collected in one branch. All twigs can be carefully screwed onto a long wire. The resulting chandelier can now be fixed to the ceiling.

Insert the socket and screw in the bulb. Your chandelier is ready!

Unnecessary material can also be beneficial.

Thus, using unnecessary material, you can easily create an original lamp at home. A self-made chandelier from plastic bottles will look beautiful and suitable for decorating any room. It is important to decide what kind of shape you want to give the lamp, as well as choose the right color scheme.

Originality is in fashion now, and therefore you should not limit your imagination. You can, starting from these options, come up with something of your own, more unusual. Thus, not only will you admire the beauty of the chandelier, but also the guests who will come to your home.

Back in 2009, the fashion house Maison Martin Margiela presented its interior collection of table lamps with bases from vintage bottles. The non-standard design, as well as the laconic form and color (black or white), subsequently gave rise to numerous attempts to repeat the trend. Including - to do do it yourself a lamp from a bottle.

Maison Martin Margiela bottle lamps

If unusual bottles have accumulated in the house, which only take up space, but it is a pity to throw them away, you can turn them into exclusive interior items. In the same fixtures in the first place. Today we will talk about how to make a lamp from a bottle with your own hands. We will also discuss the question of how to avoid cutting and drilling glass - difficulties that stop many.

DIY bottle table lamp

Of all the interior items that designers now make from bottles, table lamps from a bottle as a base are the most common. And this is understandable - the fashion is set, and the production is not complicated. Let's try to repeat.

First, we need to wash the bottle well inside. This is especially true for old bottles, in which it is not known what has accumulated over the years. For our purposes, the bottle should shine, and this in this case becomes a whole problem. Especially if the bottle is 10-20 liters and with a narrow neck, into which no brush can get through.

Therefore, several options are useful that will allow you to wash the bottle from the inside:

How to wash bottles

Pour a quarter liter (250 ml) of heated table vinegar into a bottle. Add two handfuls of coarse salt and one handful of baking soda. Vigorously shake the bottle with this mixture for about 10 minutes. If the dirt is not washed off, you can fill it with hot water to the top and let it stand for half a day - a day. Then we pour everything out and rinse it many times to wash the bottle until it shines.
Fine gravel or nails can be added to the same mixture. When shaken, these items will additionally wash the bottle mechanically. Only shake it carefully so as not to damage the glass. This method is not suitable for containers with thin and fragile glass.
As a mechanical cleaning, this option can also be useful: a metal sponge for washing dishes is pushed into the bottle. A medium-sized magnet is taken. We drive the bottle with a magnet, and a sponge sticking to it through the glass washes the bottle from the inside. Strongly dried dirt is unlikely to be washed off by this method, but a light coating is quite.

How to clean a bottle label? If there is a sticker on the bottle and it is not planned to leave it, the easiest way is to wash the adhesive from the bottle from the label with white spirit.

Now we dry our future base and start creating a lamp.

Preparing the base of a table lamp from a bottle

We need to run an electrical cord through the base. And for this you need to drill a hole in the bottle. If there is no desire to drill, we look here... When does it make sense to take up a drill? Then, when the aesthetically wound or straightened wire gives additional decorative effect to the lamp, since it is visible through the glass. In this case, you need to think over the quality and color of the power cord in advance. In some cases, ordinary black and white in plastic wrapping will do. But you can also take the so-called retro: wrapped in fabric. For example, these are:

So, in order to pass the electrical wire from the base to the neck of the bottle, you need to drill a hole. This can be done with a drill or screwdriver with a special glass drill:

Varieties of drilled on glass

We mark the place of the future hole with a marker and start drilling. The most important thing is that the bottle does not crack. Therefore, it is better to drill intermittently so as not to overheat the glass. You can periodically wet the surface with water.

Or make here the structure as in the photo below... To do this, fill the bottle with sand (in addition, you can fix the bottle - for this we take a box of a suitable size, fill it with sand and bury the bottle in it). To the place where the hole is planned, we attach a piece of electrical tape or medical plaster and drill through it - this will reduce the risk of cracks.

We attach the cord and cartridge to the bottle

Here everything is about the same as in the case of attaching the holder to the base of a table lamp from a bottle, and even much easier, since you do not need to use an adapter tube for tightness of the connection.

For some types of bottles, especially light and thin glass, in general, you can do with only one cartridge. Additionally, you can fix the wire using a plug, as in the photo below:

For greater structural strength, the cork can be greased with high-quality glue before inserting.

If the bottle has a screw-on metal cork, do not rush to remove it. It is enough to drill a hole in it along the diameter of the cord and tie the wire in a knot so that the knot is located under the plug and is hidden by it. Thus, the entire weight of the lamp from the bottle will fall not on the cartridge, but on the assembly.

But ordinary ones of the simplest form will also look good, especially for interiors in a minimalist style. If you want something more complicated, you can paint the bottle or light bulb with glass paints.

Simple lamp - glass bottle lampshade

And finally, let's talk about how to make an easy-to-make lamp from a bottle with your own hands so that nothing needs to be drilled and cut at all. This category of lamps includes everything shown in these photos:

The whole principle here boils down to choosing such sizes for the naked and light bulbs with cartridges so that the latter fit into the bottle without any problems. It can be all kinds of garlands, including solar-powered ones. By the way, lamps from them will wonderfully decorate the garden and, recharging during the day, will light up by themselves in the evening. For the same purposes, you can use pieces of LED strips or small LED bulbs.

Actually, there is only one difficulty in the case of such lamps - how to fix the bulbs in them. You can do this, for example, as follows.

We take a bottle with a wide mouth from under the milk together with a metal lid. And we cut out a circle in the lid with a knife along the diameter of the upper part of the cartridge (the one into which the light bulb is screwed):

The next step is to insert our cartridge into the hole and fix it from below with a special mounting ring (sold together with the cartridge - in size - E14, E 27, etc.):

We collect the cartridge and screw in the light bulb:

Before screwing on the lid with the light bulb connected to it, you can place the decor inside the resulting lamp from the bottle:

That's all. We enjoy the result:

By the way, about the decor ... Very often labels on bottles play its role, adding a touch of authenticity and charm. But what if there is no label on the bottle you like, but we like this feature. You can do something like emitting.

We take a piece of a decoupage card with a picture or text we like. Cut out the desired size. And curling it up into a tube, gently push it inside the bottle. In it we straighten a piece of paper (it is convenient to do this with the help of two long tweezers. Place a light bulb inside.

In this case, you will have to pay attention to ensure that the paper does not come into contact with the light bulb, ideally, purchase a light bulb that does not heat up (led).