Fantasy saw (end saw) - for which it is intended, what permeating saws are and how to make the right choice? Fantasy saw with a stretch: how to choose a high-quality and durable tool if you can saw the metal saw

The owner of the joinery and furniture workshop must have many different devices for the effective execution of wood processing operations. Among other things, the tool should be in the presence of and ending the wood saw. With their capabilities, specialists who are directly related to the field of manufacture of genital flooring, window Rams and door openings. According to them, it is optimal solution For sawing parts at an angle.

Today, you can meet ordinary hacksaws in the arsenal of specialists. Instead, the tractor saws are now used. main reason Their so high popularity is due to their high efficiency In working with a shake coating. Moreover, these devices are actively used not only by professional finishing craftsmen, but also with homemade craftsmen.

Fantasy saws possess not only mass useful propertiesBut also presented in a large variety of options. The main varieties are manual, stationary and combined models.

Tool device

Fantasy saws - These are small sizes of the device that are rigidly fixed on the workbenches through screw fasteners. The workbench has a littered design and maintains the stability of the equipment during the processing of large blanks. As part of the stationary machine of the troting on the tree, such mandatory elements as a handle, an electric motor, can be found, cutting head and massive base. If you proceed from the reviews of the owners, this tool requires certain skills for effective solution arising tasks, and also needs careful maintenance.

Purpose

Furious saws are used primarily to perform such operations as dissolving and tracing board. Effective work The tool is possible only under the condition of the use of a sawing disk of a certain diameter, which should be selected based on the size of the parts being processed. For tracing machines intended for home useIt is best to purchase a disk with a diameter of 20 cm. Good decision are And universal models in which circles are used 25 cm. This type of devices is designed to dissolve the boards.

Hand-type permeal saws is a highly specialized tool. It is not suitable for breaking the boards. It is much more efficient to use it to create short cuts. The devices of this type allow without much effort to perform the ends of the ends of the board or cut them at a certain angle. As can be judged by numerous reviews of the owners, this tool can cope with the most complex wood operations. There are models that are equipped with special extensive mechanisms. The main purpose of such equipment is cutting widespread blanks.

Functions of hybrid models

Sometimes there are situations when it is necessary to prune or dissolve the boards. For such purposes, it is best to use combined cutting saws. Hybrid versions of the tool are perfectly coping with simple standard work. The main working elements are a cutting disk and a split knife.

In order to generate the planks with this tool, a special table for processed workpiece is included with the tool. Hybrid saws Very claimed among consumers who want to acquire a high-quality woodworking machine at a low price.

According to professional masters, hybrid tracing models cannot compete on equals with specialized, since it is not able to provide high accuracy Processing and cannot be called quite reliable.

Thus, the hybrid model will not suit the owners who are looking for an inexpensive alternative to the specialized cutting sawing on a tree.

How to choose the desired ending

Choose a suitable modelsatisfying the objectives of use is not so easy. When studying different models You only need to observe a number of non-hard rules:

Popular manufacturers of fine saw

Despite the wide variety of ending machines presented, among them you can distinguish the products of manufacturers who enjoy the greatest popularity in consumers. We are talking About such companieslike Bosch, Metabo, Hitachi, DeWalt and Makita. In addition to them, quite a few interesting decisions It can be found in the line of the manufacturer "Corvette".

Professional aggregate Makita L. S. 1040

Many owners of this cutting machine call him very effective tool To perform accurate and clean cuts. Of distinctive features High power indicators (1650 W) and the revolutions, which is 4,600 revolutions per minute. Woodworking equipment meets all safety standards, which is considerable to the presence of made from transparent plastic Protective casing.

As follows from reviews, many owners use such fetrootes over the years and do not complain about the decline in their qualitative characteristics. This model will also bewho is looking for a mobile tool for woodworking, because it possesses little sizes And has no weight of no more than 11 kg.

The model is designed to work with a diameter of 26 cm. This is the perfect value for consumablesIn order to effectively perform with the use of flat blanks with a width of 13 cm with its help. When using a tool at an angle of 45 degrees, you can perform a depth of up to 67 mm, and at a direct - 95 mm. Many users celebrate A high level of quality of performance of work units of this saw model. The unit is equipped with an extensive mechanism that users have a positively, forced to work with wide wooden billets.

Features of ending various manufacturers

Of the features of the ending, which manufactures Makita, it should be highlighted a small widthbut. All models come with an extensive mechanism. In the equipping of these tracing, there are two special rods for reliable retention of the block. It is such a construction that has one of the popular LS 0714 models. For the processing of large parts, the LF 1000 saws are ideally suited, which are supplied with auxiliary supports, significantly simplifying the operation process.

Bosch's assortment also has a lot of fine-sided models with a tree breakfast equipped with auxiliary supports and stannes that are made of aluminum and magnesium alloys. Many owners find this decision correct, as this increases the strength and mobility of tracing. One of the demanded models of the manufacturer is the GCM 10 trimming, which is 15 kg.

Control devices manufactured by Corvette are equipped with a special mechanism for longitudinal broach. Among others structural The elements are a special laser pointer. Users with approval estimated this innovation, which increases the accuracy of saws.

The decisions that DeWalt offers, differ from competitors using the XPS system. Such a mechanism can also be detected in tracing from the company Corvette, but in the device implemented by Dewalt, there is a displacement function with a shadow, which is projected from a sawing disk. Many consumers call this system very convenient due to increasing the accuracy of sawing.

Products manufactured by Hitachi, Equipped with working blades, ideally suitable for performing cuttings at an angle of 30 and 15 degrees. For before, no one has been released such tracing on the market, since all the previously proposed devices could only work at a standard angle of 45 degrees.

Cutting saws from Metabo have turns and slopes of disks. Consumers are generally satisfied with the produced ending, calling them uncomplicated in circulation.

Where Japanese ending

The range of edged saws from this manufacturer includes about 450 different species devices. 8 enterprises are engaged in their production. The manufacture of trimming is attracted by enterprises located in Germany, Great Britain and Romania. On the territory of each of these countries is located at one plant. There are even additionally 5 factories located in Japan.

Cutting saw on wood with your own hands

If the owner for home use needs a high-performance tool for dissolving and transporting boards and must be saved, then you can consider it with your own hands. This is the first to think about the masters who have considerable experience in this business and good preparation. First of all, you need to prepare required tool for work:

set of files;
welding machine;
corner;
steel sheet;
the engine from the grinder with a capacity of at least 2.2 kW, operating at a speed of 2,200 revolutions per minute.

To create a cutting machine, you must perform a number of stages:

As the main working unit of the cutting machine, there is a sawing disk, which should have a diameter of 42 cm . How do users of homemade cutting sawsThis is an excellent opportunity to save on the acquisition of a branded instrument, which is often more expensive than the device made with your own hands.

Summing up

Furious saw on a tree - one of the most sought-after tools not only in industry, but also in the household. However, it is important to understand that it refers to the class of highly specialized equipment, which is ideal for performing such operations such as turning and breaking the boards. Therefore, it is undesirable to use it to perform other tasks.

Choosing this equipment for a domestic workshop, it is necessary to remember not only about the purpose of using the cutting saw, but also the conditions of operation. All this will further help choose the help of a saw blade to properly and with less time spent performing operations for processing wood processing.

Cut profile pipe 50x50x2 Fantry saw with a metal disk. may be?

Greetings.
There is no pendulum saw and / or tape at hand, since the question appeared, but it is necessary to make a cut by profile tube (Chermet, 50x50x2).

Accordingly, the question. Is it possible to use ending saws with a disk on metal (cutting) and, if so, what should turnover / power should be?

Is it possible to use a logby with saws on metal and, accordingly, what should be with power?

explanation of the question:

1. The focus of a tape / pendulum in the budget of this design does not fit, cut under the order, again, is excluded. Very mother-in-law with delivery, ETC.

2. Metal cutting end saw with an abrasive disk? 1. Cutting of metal at the tracing. Bulgarian failure. Get more or less close to 90gr. Sing, therefore, and hunt to use the permeable (on which the 90gr. is set) or the logs on the guide.

What, some special saw tracing, only on a tree? Supervised such exclusively in sets for children's creativity,

so then seems to cross universal. Cutting the profile pipe 50x50x2 by a tracing saw with a disc load when making a metal. Here:

Read the same way

Budget, this is the pendulum for the usual ESM.

it is possible to put a drive for the movement on the metal, but it is impossible to turn on the woodcut on the wood, the turns are different, it may be bad.

Maybe someone will need, I have not long been using abrasive discs, like a meadow. , All the diamond "turbo" on the stone, the 1st disk grabs for a year or two. At cost, 300-500r justifies itself every 10-20.

Manufacture of additional parts for roofing and facade (skates, angles, slopes, fits and so on). Tomsk. Metal cutting end saw with abrasive. Energy 10. T.32-31-70

Miter saw. We convert it into the cutting machine for metal.

Mark. saws JIX-KZ5-210L. Power 1400 W. Excellent cooped with the cutting pipe cutting. What you can do a saber saw. Metal cutting ribbon views of the work of the ending saw. And cheap.

Mounting saw from tording Filed saws

Corner manual Bulgarian, knows how much can be tense and unsafe this slave.
http://imhodom.ru/node/14492.
(Write in PM)

There are cutting machines for metal. Metal cutting by penal saw. Metal cutting with tape, tracing and disk saw. The cost of interscol and other Chinese about 2.5 thousand (probably). Metal cutting by penal saw. They are just for abrasive discs. Fantasy I would not spoil. There is a lot of plastic on it, and it seems to burn from sparks. And even for tracing, there are metal discs with hard-marked attacks (disk with teeth, but another form by comparison with the tree). It stands in chance about 6 thousand.

Something you, my friend, bent 6-thousand, per disk. At such prices, buy a grinder assembly with a pendulum easier.

lobzik. It is not exactly considered not considered, absurd, cut the pipes with a jigsaw.

Read the same way

tracking with a cutting disc. Saw for a short time will live, the disk is not suitable, it is necessary to nourish the adapter, and the turnover with power is not those. Also not an option

stand for the Bulgarian. Chlipaya, uncomfortable, corners float, it is very desirable to fix it inpatient, otherwise Bulgarian may behave unpredictable. If you need to cut a little, then you can do it. Less from evil. But if it will also need to cut, I strongly advise you to buy a cutting machine. 6-8 thousand, but it is worth it.

Maybe someone will come in handy, I have long been not using abrasive discs, like a meadow. , all cut diamond "turbo" on stone

And what exactly? I tried several. Heat strongly. I tried solid, for anhydrous cutting

What. then for me the news that the crossing metal is impossible.

i walked the matrix year, everyday operation, until the car was opened, and Bulgarian did not make the leg. The saws of course in slower than abrasive, but on the roof begging himself in 2-3 days. And the tiled sawing, and pipes and fittings.

Production of fair elements for roofing and facade (skates, angles, slopes, fits and so on). Cutting profile pipe 50х50х2 Fantasy saw with a metal disk possible? Cutting 170 mm steel pipe Disk saw for cutting metal with a permeaker saw. Tomsk. Energy 10. T.32-31-70
http://imhodom.ru/node/14492.
(Write in PM)

furious in the usual sense, you can cut wood, plastic and soft metals (alum. profile). Such saws usually have a capacity of 1.3-1.8 kW, a disk to 200-300 mm, the speed is 4000-5000 rpm.

pipes and other metal saw cut-off machines. They look approximately as trimming, but have differences in the characteristics. Power from 2.2 kW, disc from 350 mm, speed up to 4000 rpm.

when it would seem, small differences in the characteristics, line speed The disk at the ending will be about 1.5rd less than that of the cutting saw, with greater power of the latter. Thus, the trimming simply does not take out the load when sawing metal.

With all the diversity of the tool, the tracing saw is considered a narrow profile tool, although this is not so. Using all its capabilities, it is possible to apply it with a huge form of work. Moreover, the manual trader saw can work perfectly and personal workshop and on an individual enterprise.

Starting from the elementary cutting of firewood at the cottage, ending with cutting ceramic tile, metal profiles, pipes, sheet - everywhere you can use this tool. In a joinery or furniture workshop, this tool always has full loading. There is a demand and cutting stone - a question in the correct selection of a disc for cutting and power tool.

Fantasy saw produces not only the segment of the workpiece, it does it at a certain angle, and to the right and left, deviating to 60 degrees (from different models this angle is different). Also a sample of grooves that a crossover can do, another tool is not possible.

Furoving saws are divided into household, professional and production, that is, the machines.

The domestic is considered tool with a small power, although this is not a mandatory separation, sometimes homemade craftsmen use and saws with high power and, on the contrary, professionals use a 1200W tool. The main difference between the professional and household instrument is how much time it can work without hazard overheating. This is indicated in the instructions.

Furgent machines are used in milling workshops, the cost of their usually above 150 thousand rubles and weight of several centners.

In general, the scope of application is quite extensive.

Design features of the disk saw

The design of the disk saw is standard and fairly simple. The engine transmitting rotation to the gearbox, the axis on which the saw blade is attached, a starting device with a handle and a bed. The rest of the designs for each company producing such power tools, their own.

The engine that is installed on the saw is two different species: Collector and asynchronous. The first is convenient because it can develop a greater speed of rotation, that is, more powerful, good opportunity to control the turnover. But he has its drawback - more noisy work, it is necessary to periodically make inspection with the replacement of electrical stacks.

The second type of engine does not have contacts, brushes, you do not need to change anything. It works quietly, and there is nothing to make noise. Maintenance only for inside bearing., Therefore, the service life of up to 10 years. Well, a very significant drawback is low-powerful weights.

A new, perspective type of engine, it is called non-tissue or valve, works on new technologies using semiconductors. Collective brushes are replaced by electronics, which makes it possible to develop a large speed of rotation, the efficiency increases the noise, and the main thing is not necessary for the frequent engine maintenance.

Reductors also have two types: with a toothed and with belt transmission.

With the apparent reliability of the gear - the gears do not slip, the gear clutch does not flit, it does not break, but if one tooth changes its geometry, it will entail the need to disassemble the gearbox, replacing gear: and spoiled and working with it in a pair. This, believe, expensive repairs in the service center.

Therefore, the belt transmission is more common, especially since it is also not difficult to replace the torn strap. In addition, if everything is in the gearbox in a rigid bundle, then the belt helps at the expense of depreciation to reduce the vibration to the tool. This in turn increases the service life of the engine nodes, as well as bearings. In addition, if the disk is jammed, the belt simply slip up, which will save the engine from a possible breakage.

Fixtures from modern permeable saws

Of course, all modern ending saws are equipped with a number of additional devices that facilitate work on them and providing quality work, as well as safety for the working.

This, for example, a design that provides a rotation of the desktop in the horizontal plane to a given degree.

The mechanism of turning the table at the ending saw

Naturally, a very necessary device that allows all the elements of the table, including guides to remain in a stationary state with a moving tool. Convenient when tracing.

Usually, the disk lever can be tilted only in one direction, making a sharp on one side, but there are models with an inclination in both directions, and at different angles.

The plot of the saw allows you to increase the width of the cut, such saws are called ending saws with a break. Opportunities and type of mechanisms depend on the manufacturer's company.

Almost all modern saws are produced with a dust removal system. It can be both in the form of a special bag for dust and shallow shavings and in the form of a hose from a special industrial vacuum cleaner. This function is not at all superfluous, rather necessary, since small dust, falling into the respiratory tract, can lead to irreversible consequences, and if it is working with metal or plastic ... In addition, everything will be covered with a layer of dense dust in the workshop.

Equipping the ending saw with a special vacuum cleaner

The protective cover is also a very necessary device. The fact is that both circular and the tracing saw are the most traumatic tool.

A device that improves the quality of work can be called the restriction of the depth of propyl, especially when working with the sample grooves, as well as tooling the tool with the laser and the illumination of the working area.

Reza depth limiter

Additive such devices to gradually increase the number of revolutions when turning on, which does not allow the disk jamming when the cutting is started, automatic shutdown, if this disk is all such a jam, help keep the live saw and extend its service life. Also good function Adjusting the speed of rotation. It is just necessary when you need to work with both metal and wood.

Which disk is better to use for cutting metal

The selection of the disk for the ending saw is very important for the operation of the tool. It can not be considered something minor, the whole result of the upcoming work depends on it. Of course, you can take a specialist with you, but the article will help to cope with this task. You can listen to the seller, but in case you have knowledge on this issue.

Buying disk, you need to know that on labeling discs for circular saw And for the ending saw different, it is indicated or on the disk or on the package. Next, we look at what material the disk is designed. Note on the use of disk or written or shown schematically.

Makita Metal Cutting Disc

Then go to the sizes. There is a planting diameter, which is equal to the axis diameter on the gearbox and the working, external, which depends on the technical characteristics (engine power) and it is indicated in the saw passport. The more power, the greater the diameter of the disk can be applied to the axis. Neither larger diameter than specified in the passport, none of the smaller buying. Large diameter It just does not enter the design, the smaller just "kills" the saw.

If a landing More, special transition rings can help.

We consider the number of teeth.

For transverse metal cutting, the number of teeth should be from 48 to 80, their form should be a trapezoidal, which is suitable for cutting metal. For wood, for example, an alternating sharpening angle is suitable, which is also universal.

It is also necessary to look at the tooth sharpening angle, it is necessary to have a negative angle for metal, it is denoted by "NEG", normal for such materials an angle -5 degree. Discs are manufactured both monolithic and carbide inserts, but the metal disk for the ending saw should be certainly by such solden inserts.

Naturally, such discs are more expensive than monolithic, but also serve as longer. Their price varies from 3,000 to 10,000 rubles depending on the diameter and manufacturer.

What to choose a tracing saw on metal to buy and not guess

Most best advice, choose such a tool that has good power and the ability to adjust the speed.

Highly good feedback Saw Makita, even those that power have from 1200 W, as well as the Metabo saws. By the way, buyers noted in responds that the last brand has a very good assembly. Bosch also produces excellent equipment, there is a durability of saw, a good high-quality engine, a capacity of 140 W and a good disk is easily saw and copper and aluminum.

But if you are only engaged in metal, then choose the cutting gear saw for metal consisting of a platform and a cutting circle. He scoffs, rotating, harvesting. The cut is produced mainly at right angles. Like tractor saws, differ in the drive - with a toothed and with a belt. A disc with inserts from solid alloys is used.

It has a capacity of 2300 W and speed of 4000 per minute.

There is a Stanley STSC2135 mounting saw model, which is specifically designed for construction.

She has a special lever in the design, which unlocks the bed to quickly move, which reduces the time on the clips of the workpiece. Spent with success metal pipes, as well as various profiles. Very well thought out the protective casing protects against injuries.

Prices for fine metal saws are mainly lower than on standard combined saws, since they have few different additions in the design. For example, the last model can be bought from 7500 rubles. If you look such a trader saw for cutting Metal Bosch Gco 20-14, in Moscow without delivery it costs from 11,300 rubles. For good construction brigade quite acceptable price.

In small volumes can put the task of choice between different types of tools. With two-three billets, it is quite possible to cope with the usual without worrying about the network liner and other organizational problems. Full-format machines will help for several minutes to serve and dozens of products, but to acquire such equipment for domestic use is irrational. The optimal choice will be the fettering for metal, which is characterized by mobility, performance and wide functionality.

Tool Features

Furoving saws have a lot of structural and functional differences from machines and jigsaws. As for the instrument device, then key feature is the presence swivel table.. It is thanks to this platform that the operator gets the ability to cut at angles. To ensure the high accuracy of the ending, the same table provides for a small graduation scale, eliminating the need to perform measurements with separate devices. Moreover, latest versions From large manufacturers are equipped with laser pointers indicating the cutting line. In some versions, the crossing for metal also allows an automatic broach. In the process of cutting, the user moves the workpiece, and special grips at a certain speed. To simplify follow-up activities, manufacturers equip the trackers and dust offering systems. Through the remote pipe is connected building vacuum cleaner (Usually the same brand), which during the operation blows the chips with garbage to the bag.

Specifications

In the choice it is worth analyzing a whole set of parameters that will help to make an idea of best selection. The main list of characteristics can be represented as:

Power. The average value is in the range of 1000-3000 W. If the rate is done only on metal, it is desirable to acquire a device with a potential of at least 1500 W. On reduced power, it will be possible to work only with thin-colored soft blanks.
Rotation frequency. This indicator does not affect performance. Peak traction is still determined by power. But the possibility of changing the speed can be useful in cases where it is planned to process the workpiece of different types. The maximum frequency reaches 5000 rpm.
Disk size. The diameter varies on average from 150 to 355 mm. Moreover, the disks on the metal is characterized by the presence of attacks of solid-state alloys. They increase efficiency and quality processing.
Sharpening type. It is important to keep in mind that the shape of the tooth of the saw blade may have a positive or negative angle. For metals, only the opposite is used, that is, a negative sharpening.

Model "Makita LS1040F"

This tool is universal. Its important advantage is the ability to qualitatively cope with the crossing soft metal, wood and plastic. The power potential of the model is medium (1650 W), but it is enough to ensure the depth of the cut of more than 90 mm. It should be emphasized that this technician for metal is hardly suitable for professional cutting of material in construction or large production. It will affect the lack of power and endurance when working in a flow. But this deficiency is compensated by the following advantages:

Wide equipment, including 255 mm drive, guides, lamp for lighting, bag for vacuum cleaner, etc.
Additional feature in the form of spindle lock and smooth start systems.
Construction reliability.

Model "Demolt D28720"

With regard to productivity, this is the opposite of the previous tool, since the capacity is 2300 W. Accordingly, the saw disk format increased - up to 355 mm. At the same time, the presence of a high-power electric motor did not downgrade the ergonomic properties of the equipment. Fast snap change, easy access to brushes, even at home and convenience in physical circulation - all this causes the comfort of operation of felting for the Metal "Devolt D28720". Reviews also emphasize and comfortable cut with a vertical location of the working equipment. In this mode, sawing thick blanks with small physical efforts from the operator.

Model "Ague 355"

The tool is intended for cutting high carbon and steel alloys. Power is also 2300 W, and diameter cutting cloth - 355 mm. The cut can be carried out and under direct, and under the 45-degree angle. Among the characteristics of the model, you can note the presence of rapid clips, triangular profiles for direction and massive protective casing. However, the additional optional ending for metal "Ag 355" is deprived. In particular, there are no high-speed support system for such power tools and smooth starts. But a sparky is provided, a special compartment for fasteners and keys. According to users, the saw provides stability of sawing, high accuracy and performance.

How to make tracing on metal with your own hands?

The cost of the cutting machine is 15-20 thousand rubles. The amount of considerable, so many homemade craftsmen decide to make the aggregate independently. About a full-fledged assembly of garage fixtures of speech, of course, does not go, but on the basis of a more affordable corner car (bulgarian) to implement such a tool is quite possible. Working events will be reduced to the installation of the platform and framework, binding an ush and table. For the main frame, you can use a channel, a corner and thick sheets of steel. By welding, the tabletop is composed desired size With cut for cutting blanks. Next, the framework for crossing the metal from the Bulgarian is performed. With their own hands, it will not be difficult to perform it from the pipe fixed to the desktop bolts and welding. In motion, the functional part will have to be lever, which is also made from the pipe with a rubber shell or finished handle. For marking, you can apply a metal line on the platform and provide guides.

Before work, make sure that the tool is Fit, equipped with a whole disk (without cracks) and is properly connected to the network. Separately checked security tools - casing, spindle blocker, dust collector, etc. Already in the process of cutting should be monitored working areaSo that it accidentally did not get extraneous objects. All fastening equipment, consumables and blanks must be removed from the table. Metal crossing control is carried out smoothly and without jerks. Pressing on the workpiece regardless of its size should be performed with the same force throughout the entire process of cutting - it will provide smooth and clean edges. When working with longitudinal opening, it is recommended to use rectangular guides and stops.

Conclusion

The segment is wide and in it are presented. different models To perform metal processing. Specialized cutting machines, for example, make it possible to cut products based on solid-state alloys. Such models are distinguished powerful engines and reliable design. But there is a class of less productive, but useful in everyday life of universal saws. This refers to the above ending for the Machine LS1040F Machine, which allows high-quality processing aluminum and copper blanks. The same unit will be useful if you need to perform sawing wood material. In the choice do not forget about additional features tool. Although the extension of the functionality directly affects the price tag, modern systems Safety and fixtures for correction cuts will not be completely superfluous.

Saws for metal

Metal cutting methods

Metal cutting can be performed both hot and cold way. The hot method is based on heating the separation location to melting point. These are methods such as laser cut, cutting electrodes, cutting in a gas environment (plasma), cutting with autogen.

These types of cutting are used in most cases in production.

Flame cut

Cold cutting includes such things like guillotine metal cutting, cutting grinding machinecutting hand tool, for example, scissors, with metal hacksaw, drilling chisels. The most progressive and comfortable is cutting with a metal saw, which is designed specifically for working with the metal.

As a rule, a trimming saw with ordinary equipment and an average power engine is used for cutting joinery, but there are transverse saws for metal and wood, which, if correctly use the right silent discs For metal for tording Saws, can cut metal, but mostly color and plastic, and, of course, wooden pieces.

What to choose - a ribbon saw or tracing saw for metal

The principle of tape saws is that cutting tool - This is not a disk, but a belt and a special mechanism located on it. The speed of work is quite slow, about 100 revolutions per minute, but this tool can see sufficiently large diameters, both logs and metal pipes.

Ribbon saw cutting circuit

Like any tool, ribbon saws can be:

Household, when the delivery of the frame that fixed the saw blade, occurs manually. It is used for irregular work when sawing soft steel. Lubricating and coolant software in these machines is not used.
Semi-professional saws, the frame in them is lowered using hydraulic feed. In this equipment, it is necessary to use a cooling fluid. They can see carbide brands.
Professional saws are fully automated equipment, where the operator produces work. Good speed, cutting quality, as a rule, the presence of rotary sponges that allow you to cut at an angle of 45 degrees.

Professional belt saw For metal cutting

Big plus saw - this is the tape itself, which can be installed on the machine of any manufacturer and power.

Very good feedback from the semi-professional jet jet aircraft JET J-349V at a price of 36,000 rubles.

A good option. This is semi-professional band-saw from Jet.

Read:

It can work with a blank of 125 x 125 mm, its weight is 19 kg.

Switzerland manufacturer - Taiwan.

When choosing a pendulum saw, it is necessary to take into account its principle of operation: productivity, accuracy of work and the possibility of cutting at any angle. The principle of operation of the pendulum is that the cutting mechanism itself works on the same principle as the pendulum: up and down. Its main part is circular saw.

Cutting saw For metal compared to another instrument, the advantages are that it is:

tool with many functions;
using the pendulum node, the cut itself is obtained with high accuracy;
the speed of work is quite high;
Buy pendulum saw for metal is very easy, and also adjust it to work;
just maintain and change the saw blade.

One of the essential drawbacks of such a saw is its high price, especially if it is a professional tool. For metal, a professional tool is used.

There is an inexpensive finish russian manufacturerFor example, from Elektropribor PO.2400 DM, which can work with the metal, their cost is from 5,450 rubles.

Mounting saw from sawmill saw

The one who saw a big corner with a manual Bulgarian language knows how hard this work is dangerous.

Mithra. We turn it into a metal cutting machine.

Do saws JIX-KZ5-210L. Power 1400 W. Perfectly copes with a cut of the profile pipe. And cheap.

An excellent option for dry cutting of ferrous metals is the facing of the Russian-Taiwanese manufacturer Messer DRC 355 at a price of 43,000 rubles. All reviews are excellent, design is good, the quality of execution corresponds to the price.

Messer DRC 355, saw with a pendulum mechanism

You can buy a transverse saw for metal in Leroy Merlin. There they are much cheaper than in other stores, such as Metabo CS 23 with a disk of 355 mm costs 10980 rubles, Corvette 431 for 7800 rubles.

Is it possible to cut briquettes

Many disputes among professionals about mitra for cutting metal. These ending saws having angular speed up to 5000 revolutions and power up to 1.8 kW, even when used disk saws With a carbide disk for a tracing saw, can cut a thin sheet, a non-ferrous metal, plastic, and the ferrous metals are not suitable for them.

If you take a tube or other rolling, for this there are special cutting machines that are almost the same as tracing saws, but having others specifications. This is a serious tool that a lover will not buy, which would cut a piece of corner once a month. For example, a linear speed should be at least 1 time, 5 times less, with a capacity of 2 kW, the disk is larger, the average size is 350 mm.

If you buy a transverse saw with pendulum metal, its price will depend on the manufacturer and from the appointment of the saw. If a professional type saw has a prescription for sawing wood blanks, plastic sheets and non-ferrous metal strips, naturally, their price will be cheaper. If you take a transverse saw for cutting metal, for example, the Makita LC 1230 brands, its price is from 25,900 rubles, it cuts both thin-walled pipes and rolling with a wall of 3.5 - 4 mm. At the same time, users note that for the thick workpiece you just need to more often change the saw blades for a saw for a saw that is not cheap purchase.

Here is a serious tool - Mitral saw Makita LC 1230

Read:

The diameter of the disk is 305 mm, it is directly driven, with an engine capacity of 1750 W, the maximum speed is 1300 per minute.

Not bad reviews and the transverse pendulum saw Makita 4131, which can cut off the metal with a thickness of up to 5 mm. The tool has a lot of additional useful options. It is both the protection against engine overheat and rough lock, as well as the ability to adjust the depth of the size itself and the lock button from accidental activation. Assembly - excellent insulation. Price from 21700 rubles.

Therefore, the answer to the question is whether it is possible to see the metal with a saw, of course, will be possible, but not with any saw, and not with each disc. To buy a good and working metal disk for tording saws, it should be remembered that it should be a carbide disk with large quantity teeth, more than 60. It is made of steel with high carbon content and doped with molybdenum, nickel and chromium for greater hardness and strength.

Good demand for CDs from Makita, their price from 5300 rubles, Bosch, in the same price range. If you take Hitachi, the same diameter of 305 mm can cost 3850 rubles.

Hitachi Cutting Disc for Metal Cutting

If you take such a brand as CMT, the manufacturer of Italy-Germany, its wheels are even more expensive, from 6800 rubles, they cut steel, cast iron, metal profile, sheet. Tungsten carbide, teeth 90 pcs.

Jet discs are also well suited at a price of 4,900 rubles. They can serve for a very long time, up to the year, then they are recycled and come into operation again.

How to make mitra for metal manually

Of course, Makita in this tool segment ranks first - and the quality of the instrument and relatively low priceBut for an amateur of various types of crafts, he still "bites." Therefore, artisans themselves make such a tool.

You can buy a cheap finish, for example, from P.I.T. RSM 355-C, change it to a smoother and thick. You also need to change the mount. You can remake and improve the quality and other inexpensive ending saws, the main thing is that the technical characteristics of your engine are satisfied.

There are options for the manufacture of such a saw with the Bulgarian, but such a saw is unlikely to be able to accurately and precisely cut off the workpiece, but for infrequent and unregistered work, it can be fully applied.

You can make another type of trimming, but it will be quite heavy in work, but the mechanism itself will work smoothly. You need to stock up with an electric motor with a capacity of at least 1000 W, metallic sheet for frame, angle and a channel, a hinge assembly, a powerful dense spring, a grinder for work and welding apparatus and various metalworking tools.

We make a frame welding using a sheet and metal. Then on working surface Cut the hole that needs to be treated from burrs.

From the canal, we prepare a pendulum stand 80 cm high, installed on the desktop. On hinge nodes, we set the finished metal plate for the engine, which should move. When installing the electric motor, we stabilize its spring. Using the damper, we set the belt tension, the pendulum itself is made of metal. We make a protective casing, our health is more expensive, we choose a drive about 400 mm. Ready.

Homemade cutter

Drawing for trimming You can do it Fantasy saw with a broach - characteristics are not the features of the use of ending saws. Different manufacturers) (domestic, of course you attribute to the category "Equipment for wood processing" in different words to machines. In general, they are not one of the "intermediate links": such equipment may be put on Inpatient, in ...