Spinning stand on the table with your own hands. Rotary table with your own hands. Step-by-step instructions for assembling a rotating table with their own hands

A swivel table for cake with their own hands is needed not only to seasoning confers. This is the necessary subject for those who prepare for their pleasure. Do not do without such a design by hostesses who baked coated cakes from mastic. The main purpose that has a spinning table is to facilitate the process of decorating the cake. That is, you do not have to go around yes near the finished product, it will be enough to just decorate a rotating cake. Baking is spinning around your axis, and you just need to decorate it.

How to make a turntable? To begin with, prepare all the necessary materials. You will need two bearings that can be purchased in auto parts stores.

Pay attention to the fact that there are double, compressed bearings. The second option is preferable because you have to tinker less.

The rotating table needs both in a wooden plate. You can stock door from the kitchen headset. In addition, they will need hard nails, self-tapping screws, plastic tubes, metal circle, thin plastic, plywood.

Work process

Scheme drawing

Rotary table with your own hands is quite simple. First of all, you will need to draw a quality drawing. After that, we start working according to the following scheme. If you have two bearings, and not one pressed, then you score a smaller diameter element to a larger with nails. In a wooden plate, it is necessary to cut two circle with a diameter of 20 cm. In one of the circles, the hole is muffled in which the bearing is clogged. In this case, the two parts are twisted and fixed with self-draws. Bearing is placed in the center.

The table is equipped with plastic tubes. The tube must connect the upper and lower parts. Consider this moment when you do the drawing for the turntable. In this case, the tube must accurately enter the bearing. The ideal length is considered 15 cm. Such a tube will not be too short or long, so you do not have to bend in the process of decorating the product.

The top is made of metal. In order for it to spin, pay special attention to its diameter. On average, the diameter of the metal circle should fluctuate from 30 to 40 cm. If you have the ability to cook the items, it will be only wonderful. For those who are deprived of such an opportunity, cold welding is invented, which externally resembles plasticine. Rotary table for cake requires circles cut from plywood. The rotating portion is installed on the pipe, and the elements are fastened with the help of screws.

1 2 3 4
5 6 7

The table can be made of wood:

Turning table for cake

Bearing knot assembly
Base for table tops rotating part collected
Rotary table for cake (bottom view) Turning table for cake (side view)

In the arsenal of each pastry, there must be a swivel for cakes.

With it, it is possible to significantly alleviate the process of decorating cakes and make it pleasant, comfortable and safe.

If the purchase in the near future is not planned, then the experienced master can assemble it independently.

If you want a cake to be available to you from all sides at the same time, and at the same time you should not run around it, be sure to think about the presence of a rotating stand.

What is the rotary design for cakes? This is a product consisting of:

• round working surface;
• - relations;
• rollers, rubber bands.

Thanks to its design, the table is easily rotated around its axis, and provides convenient access to the confectionery product.. With this delivery, you can most conveniently create elegant and original decors and form decorations of any complexity. In this case, you can absolutely not worry that your masterpiece will eat, damaged or falls to the floor.

A swivel table for cakes can be purchased in the finished form and make it on their own. Homemade design has a lot of advantages. First, you can make a product that fully meets your requirements and preferences.. Secondly, you yourself will be able to create a thoughtful drawing of the product, pick up the materials of its manufacture and think over the most optimal dimensions. In addition, the homemade design will come out much cheaper than purchased.

Materials

A spinning table can be made of any kind materials:

Each individual option has its advantages. The tree is characterized by environmental friendliness, safety, pleasant to the touch texture. MDF and Plywood are easily processing. In addition, this material has a small cost.

But the chipboard is inexpensive, and his appearance is attractive, and it's nice to work with him.

Council: In order to save consumables, you can use the door from the old kitchen headset for the manufacture of countertops.

Instruments

Having decided to make a rotating table for cakes with your own hands, prepare the following tools and materials:

Important: Bearings are double and pressed. The second option is preferable to assembling the rotating coach for the cake, as they are more convenient in the installation.

How to make a rotating table?

Make a swivel table is quite easy and simple. First, you will need to make a competently thought out sketch. In this drawing, specify the product design, its exact dimensions and manufacturing materials. Having at hand such a scheme, you can easily assemble a table from the first time and without errors.

The process of manufacturing the turntable is carried out in the following sequence:

That's the whole is not a complex process of manufacturing a rotating structure.

Council: To give a decorative appearance product, it can be saved with thin plastic.

Also, the product can be decorated with self-adhesive film. It is just glued and easily clean.

Photo

Choosing various materials and approaching the question creatively, you can get very different tables.

There is such a thing as a turntable. Some use it for presentations, of any souvenirs. Confectioners are used to rotate the cake during the manufacture of the latter. I decided to make a turning table with my own hands to show my homemakes, such as "3D". The engine was based on a microwave oven. Makes almost 3 turns per minute. It feeds on the household network 220V.

For the design of the table we will need:
- a circle of plywood;
- rectangle from plywood;
- switch;
- aluminum corner, for fastening the switch;
- Network cord;
- screws 10 pieces;
- Motor from the microwave oven.

The first stage in our foundation was done by cutting under the motor. I got somehow crookedly, but not the essence, closes the table by myself. The size of the base is 250mm * 100mm, plywood thickness 18mm.

In the pancake table, drills a hole with a diameter of 6 mm, the axis of the motor is 6.5 mm. The hole is not pass through, but exactly the length of the axis of the motor (about 10 mm). We try. Enters tight. If you drill the same diameter as the axis of the motor, then the pancake will hang out. It will have to glue, and this is an extra time for the manufacture of homemade.

Be sure to look at the motor. There are no 220V. I came across 21B. In the latter case, a transformer is needed, you can drive from the control board of the same furnace.

Since I have Plywood, I decided to paint the pancake and the base of the table from the canister. There was a matte paint in black. Everything dried quickly. Along the way, drilled a hole to make the wires.

After drying the paint, we screw the motor to its permanent place. I took the screw from the old printer. Very successful due to a wide hat.

Take the wire into the hole from the bottom of the structure. We connect the switch, I have a TP 1-2 toggle switch. Corner crepaim to base. Cover to the corner toggle switch. If there is no corner like me and the other switch, you can make anything for your needs.

So that the design did not go on the table, I decided to install rubber legs. In the role of the legs applied caps from the medication. In general, it is very convenient to use similar legs in the manufacture of hulls, homemade. Rubber is very elastic. Screw them to all the same screws from the printer.

Damn table in my case 230 mm. Thickness are all the same 18 mm, as at the base. For my needs it will completely come down. Here is a table I turned out. I repeat, per minute makes almost 3 turns.