Choose double-glazed windows with experts. What are the doctor silent about? Plastic windows - Slow killers for the population of third-world countries Rating window profiles: Comparison of products of key manufacturers

I am glad to welcome your readers!

For your work, I installed many windows, but most often the quality was not very good.

The fact is that the main thing in the plastic window is a profile, but at first glance, on the view all the windows are the same. That is why I often faced the fact that customers choose a poor-quality profile.

What is the main thing in plastic windows? The foundation plastic windows - Profile. A good profile is a guarantee of high-quality and reliable plastic windows.

How to choose a high-quality profile and what to pay attention to when choosing? I want to help you find a response in this article.

We go to the street or take the newspaper and, that we see the windows Kbe, Rehau, Veka, SalamaAHder, LG, Proplex, Barbooks, and the like. What is all these names? - This is the names of firms manufacturers of the window profile and nothing more, and your windows will produce completely different firms, and we know well that our manufacturers can make from the best raw materials.

And yet a little about the profile manufacturers. Ordering the windows you will hear from the manager that the windows (for example Kbe, Veka, Rehau, Salamander) are German windows of production of Germany - naturally the best and high-quality. What is the truth in these words, what is not? Of all those listed only by Salamander, 100% is produced abroad (so it and the price corresponding to), the rest have long been produced in Russia.

And about the production of the window profile. Most profile manufacturers factories built their plants in Russia. I was at the factories of the KBA and the century - beautiful plants, imported equipment, foreign specialists, imported raw materials, so that there is no big difference profile (I think this situation and in other plants of European manufacturers).

True, as always, there is "but". This is "but" the profile system produced specifically for Russia, i.e. Abroad, it is not used - it is only for us according to "our request." The advantage of this system is cheap, disadvantage - for reduced, the walls of the profile do thinner, respectively, the thermal resistance is less, the strength is less.

For the south, this is quite acceptable, in the middle lane - doubtful, in the north they can freeze. Usually this profile system is called object profile and used for glazing large objects - multi-storey residential buildings, industrial enterprises etc. There are still Russian and Turkish systems, but since we are going to glass our home, we will not consider in detail these systems.

Which profile I prefer personally, I can write further.

What do you think the profile is better? What is better Rehau or Barbokox? Century or relax? KBA or LG? etc.

The most difficult and annual question, to give an argued answer to which is almost impossible, I can only express my personal opinion. Once again, I emphasize - this is my personal opinion, and not advertising and the conversation will only go about the profile systems with which I worked.

A few words about Salamander (goes wrong) - good profile. The main advantage is made in Germany, the main drawback is expensive. It was produced, in Russia - was among the middle peasants.

Now, in order of profile systems produced in Russia:

Better than others:

• the number of customer reviews
• the number of marriage in the supply of plastic profile,
• seal
• conduct seminars, trainings and training courses for windows manufacturers.
• A variety of specialized systems.

Another advantage - sells a profile only on well-equipped plastic windows manufacturing enterprises that regularly checks and gives their certificate to these factories. Therefore, if you chose the plant working with this profile, then the probability of getting into an unpleasant situation is less.

I give second place. This company sells its profile only on well-equipped plastic windows manufacturing enterprises that regularly checks and gives their certificate to these factories. Therefore, if you chose the plant working with this profile, then the probability of getting into an unpleasant situation is less.

Honored 3 place.

Disadvantages:

• There are breakdowns in the supply of profile, profile marriage more often than - Rehau and Veka
• Sells a profile by any plants of plastic windows.

THYSSEN, LG, DIMEX

Motntblank, Propes, Barbokox

Share the last place in quantity positive feedback People who put windows, but very well suited for glazing balconies and loggias, as well as household premises. Dignity - low price.

P.S. With other profile systems did not work, so I can not say anything about them.

source: http://infokna.narod.ru/

Which profile of the plastic window is better to choose? Competitions for choosing and rating manufacturers

The profile is the main element of any window, it is precisely the durability and reliability of the entire design that depends on it. At first glance, the profile for PVC windows from different manufacturers looks almost the same.

The difference in quality becomes obvious a series of several months (or even years!) Use when cheap windows begin to move and slots are formed in them. How to choose a good plastic profile for windows? What products of different brands differ from each other? And does it make sense to save on glazing, choosing a housekelate profile?

Profile for PVC windows: characteristics and types

The profile is the basis of the entire design, from which windows and frame flaps are made. It is they who define not only the appearance of the window, but also its strength. Common materials for the window profile - wood (cedar and larch) and aluminum.

But most often the profile for windows is made from PVC, or polyvinyl chloride. Such a profile is strengthened with metal inserts and inside has air cavities that increase the thermal insulation of the structure.

According to the European standard EN 12608 Sr, "non-controlled polyvinyl chloride (PVC-U) for the manufacture of windows and doors" and similar Russian GOST 30673-99 "Polyvinyl chloride profiles for window and door blocks. Technical conditions»Profiles are classified for a number of characteristics. In particular, according to the indicators of the thickness of the external and internal walls, it is allocated:

1. Class A profiles - have an outer walls with a thickness of 2.8 mm and inner walls 2.5 mm thick; They provide best heat insulation And they are considered the optimal choice.
2. Class B profiles have an outer walls with a thickness of 2.5 mm, internal - from 2.0 mm; Such windows are not only "colder", but also 15% less resistant to deformation.
3. Class C profiles are all others that are not suitable for standards A and B, there are no strict requirements.

Note!

There is a so-called "object" profile, which is intended for installation in non-residential production rooms. It is impossible to use it in homes and apartments - because of the thin walls, it does not hold heat and unstable to the deformation.

This profile at first glance is no different from the usual - except on the protective film you can see the Object marking. Often unscrupulous companies offering very low prices for their goods, sell windows precisely from such a profile.

Choose the best profile for plastic windows

Determine "on the eye", which profile of plastic windows is better, not easy, but there are some features that can say a lot about his quality.

Uniformity profile

Plastic must be homogeneous and absolutely smooth. The grainy surface says that the windows were most likely made in handicraft conditions and are fake. The coating should also be homogeneous, without divorce and gradient.

By the way. In order not to buy a fake at the price of branded windows, pay attention to the factory labeling on the inside of the window box. It should be a stamp with the name of the manufacturer and a number of numbers: the shift number, the device for the production of PVC profiles and the date of manufacture.

Profile width

Most often the company offer a plastic profile for windows 58 mm wide - this classic option, preferred for residential premises. The profile is 70 mm wide, this is often installed in high-rise buildings or where the climate is especially harsh. 90 mm wide profile refers to premium proposals, it is characterized by excellent heat and soundproofing characteristics. However, not all companies work with such products.

Thickness profile

The thickness of the profile must be the same, from 2.5 mm to 3 mm. However, for heavy window blocks, thin walls are not suitable - in this case, the welding seam is less durable, which means that the reliability of the entire structure suffers.

Number of aircases

The number of cameras depends on the profile width. A 58 mm profile may have a maximum of three cameras - which, however, is enough for the windows to maintain heat. 70 mm - three, four and even five cameras. The last of those mentioned (70-millimeters) are most in demand for glazing apartments and houses.

The norm for the 90 mm profile is six cameras. The more cameras - the warmer and quieter will be in the house. However, the sake of fairness should be said that the difference between, for example, a three-and-four-chamber package is not so significant.

Number of glass packs

You should not confuse the number of aircases in the PVC profile with the number of glass windows. The glass is a few glass sheets connected by contour using a special frame and sealants. Between the glasses, sealed cameras with air or other gas inside are formed.

Single-chamber glass is the easiest, it consists of two glasses and one air chamber between them. Such double-glazed windows are very lungs, suitable for glazing large openings, so they are often installed on balconies, loggias and terraces. However, they are not suitable for windows due to insufficient thermal insulation.

For home, summer cottages, office or apartments, it is better to choose a two-chamber glass glass, consisting of three glass sheets and two aircases. Three-chamber glass windows of four glass sheets are infrequently, they are severe and pass less light than other types of double-glazed windows.

Such windows are in demand only in the north, where the temperature in the winter can descend to -40 o C and below. At higher temperatures there are almost no difference between dual and three-chamber glass windows.

Helpful advice!

Choosing a plastic profile for windows, pay attention to the frame seals. There should be two, otherwise there will be condensate under the frame, and this spoils insulation and creates a favorable environment for bacteria and mold.

Window Profiles Rating: Comparison of key manufacturers

• Rehau.
  One of the most famous companies that has been producing reliable windows for more than half a century and is considered the main innovator in this area - Rehau engineers are constantly improving the design and configuration of the profile - so, the company pays great attention to ecology and energy-saving technologies. The company produces a profile with a width of 60-70 mm. Rehau products refers to the MIDDL class.
• Veka.
  Another German "giant", whose products are appreciated worldwide. VEKA produce a white and color profile that does not fade and does not yellow under the influence of direct sun ray. The seal is made of natural rubber, which does not freeze even under the influence of very low temperatures - valuable quality for the Russian climate. The line contains a model with a width of 58 to 90 mm. At the price of the VEKA window, comparable to Rehau.
• TROCAL
  This is a company with a long history, one of the pioneers for the production of plastic windows. The first model was released in 1954. For decorative finish The company offers a wide range of options - from lamination to acrylic coating. The profile is made according to the environmentally friendly technology of GreenLine and provides impeccable heat insulation. Profile width - 70 mm.
• Salamander.
  This German company is not as well known as Kve or VEKA, however, Salamander products are never inferior to them in quality. The profile is produced exclusively in Germany, which means purchasing such windows, you can count on true European quality - at the European price. The company produces batteries from 60 to 76 mm wide.
• Kbe.
  One of the most popular German brands, which produces environmentally friendly windows recommended for installation in children's institutions and hospitals. Kve windows are distinguished by high quality and durability (can serve up to 50 years!), And in the ruler there are both luxury models and economy options. Profile width - from 58 to 70 mm.
• Proplex
  Proplex is a Russian company, which, despite youth, has already managed to establish widespread production and significantly upgrade window systems. The profile is developed with the participation of Austrian professionals and taking into account Russian conditions. With very good quality the company is still possible to maintain affordable prices. Proplex offers models with a width of 58 to 127 mm.

This is only a small part of the manufacturers of plastic windows, in fact, their dozens, if not hundreds. What plastic windows are better? Choosing glazing, you should give preference to known brands, but it is necessary to check all the documentation - the famous brands are often formed. Branded windows at a low price - a sign that you may be trying to deceive.

Opinion edition

Even the best windows will last long, if errors were allowed when installing them. Better eclipse windows installed by professionals than expensive German windows mounted by lovers.

source: http://www.kp.ru/

What profile plastic windows is better

What is a high-quality profile?

Pledge quality and durability metal-plastic window is a high-quality profile. Even if at first glance the entire profile for plastic windows is the same, in fact it is far from the case. Which profile for plastic windows is better, and how to choose the right window of VEKA RUS specialists.

Certificates

The entire profile from which the windows are manufactured - certified. The most significant is the RAL certificate, which certifies not only the type of product, but also its place of production. In other words, the profile of one brand, but made at different factories will not always have this certificate.

The certificate of quality management system ISO 9001: 2000 is issued to industries that are competent organized system Management in compliance with all technological, economic and organizational requirements characteristic of the production of developed countries. Both Russian VEKA factory have this certificate.

If the profile is wider, then it is more reliable and warmer?

Profile width is one of its main characteristics. Many window manufacturers promise a couple of extra millimeters to the profile width in their advertising campaigns, but are there any benefit from them?

The market most often meet the following proposals:

1. classic profile 58 mm;
2. profile 70 mm with an enlarged mounting width;
3. profile of VEKA AlphaLine 90 mm.

Width of 58 mm due to the "classic of the genre" - wooden Ramami, On the shift that windows came from plastic. To date, the EUROLINE 58 mm profile allows you to produce modern warm windowswho satisfy the requirements of most buyers in different climatic zones. Given that proper production and installations best Profile For windows in any room.

A 70 mm wide profile is a proposal that appeared in the 80s of the last century. Having higher heat-saving sound-proofing characteristics, this profile especially loved to Russian consumers. In the VEKA Profile Commodity Group, 70 mm width have Softline, SwingLine and Proline.

A 90 mm wide profile is a premium product that appeared about 5 years ago. VEKA AlphaLine profile allows you to use a double-glazed glass with a thickness of up to 50 mm and is currently an unrivaled leader among window profiles with increased energy-saving characteristics.

Note!

The choice of profile width largely depends on the installation site (window in the office, a tambour door, entrance door In the store, windows in a country house) and climate.

Now another new product has appeared on the market - the profile of Softline 82. An innovative multi-chamber system, an elegant style and the ability to choose from more than 40 modifications guarantee the needs of the most demanding client. The SoftLine 82 system provides the best insulating characteristics, fully compatible with 70 mm profiles and can be installed in any homes.

Number of cameras

The second feature of the window is the number of cameras in the profile. In the standard three of them. The first is to remove condensate, the second - to accommodate the reinforcing metal liner, and the third is to fix the parts of the fittings and create an additional air layer for the best tightness of the window. The number of chambers depends on the profile width. So, the 58-mm profile may have a maximum of three cameras, but a 70 mm profile is desirable, four. For a 90 mm profile, 6 cameras are.

Three and six chamber profile systems

Increasing the number of chambers with the same profile width, insignificantly changes the window characteristics. To increase the heat-saving characteristics, a wider profile is needed, not large quantity Partitions in it.

Full package

Another important point is a glass. The number of glasses in the window affects its characteristics and cost. Double double glazed windows are the most common, but you can also order windows with single glazing or triple double glazing.

"Triple" windows are warmer. However, they will weigh more and require high-quality mount and stable design. Single glass is the coldest. It can be used for glazing unheated balconies, as well as summer houses. Double glass optimal technical characteristics, and allows you to save comfort in the room in all year round.

Profile class

There are two classes of metal-plastic profiles. The first, class A, with a thickened outer wall, is certified by the RAL system as an optimal profile for windows, doors and frame glazing.

Helpful advice!

The second, class B is a lightweight profile with a thinner outer wall, the so-called "object" profile. It has a slightly lower cost, but does not guarantee the conservation of the window characteristics throughout its operation.

Windows from the "object" profile, as an economy option, can offer absolutely all manufacturers, but you must remember what a window can have more weak corner connections, worse formulability, lower energy-saving characteristics, the risk of premature accessories, less service life.

conclusions

Summing up the arguments on the topic of choosing a profile for a metal-plastic window, we emphasize:

• The availability of certificates confirms quality.
• By mounting width, all profiles are divided into two main classes: 58, 64 mm and 70 -76 mm. Inside the class heat engineering The same. A 68 mm wide profile and a 72 mm wide profile do not differ from each other.
• The number of cameras affects the quality of the window only if the profile refers to different classes In width.
• The most common is double double glazing.
• Class A profile is a leader in reliability and quality.

Selecting the windows, you will hear the necessary information and screen advertising. The quality of your windows depends on your choice. Do not spare time to make a choice right!

source: http://www.veka.ru/

What plastic windows PVC are better - 2 chamber, 3 chamber or 5 chamber?

Often we are confronted with confusion when discussing plastic windows, confuse cameras in a double-glazed window and cameras in the profile, I hope that this article will help you deal with cameras in modern plastic windows.

In his article 3 chamber and 5 chamber profile - what is the difference? We already understood what the 3 and 5 chamber profile differ, now let's see which profiles are better.

Here the more, the better - many cameras do not happen.

Plastic windows consist of profile and glass and accessories.

The double-glazed glass can be single-chamber (2 glasses and one air chamber between them) and 2 chain (three glasses and two air chambers between them), also the profile can be 3 chamber and 5 chain (there are profile systems with large The number of air chambers).

2 chamber windows are almost 1.5 times warmer than one-sample. The heat transfer resistance of the glass unit from 3 glasses is 0.42 sq. M C / W, and for 2 glasses - 0.33 sq. M C / W. Many mistakenly believe that the additional third glass is made exclusively for noise insulation.

In fact, in the first head, the third glass is put for heat saving and only then for additional noise insulation.

The same is the case with the profile. Not only is the 5-chamber profile warmer, it is also tougher, he does not have a cold bridge in the area of \u200b\u200bthe loop (in the 3 chamber profile in these places there is often freezing in winter).

But the most important thing is that the 5-chamber profile has a thickness of 70 mm and the double-glazed windows can be installed with a thickness of up to 44 mm, whereas in the 3-chamber not more than 38 mm, and this is additional thermal insulation and energy saving.

What a glass pump and some profile choose.

If the window goes to the balcony / loggia that are glazed or you plan to glazed them later, then in this case you should not overpay and it is worth choosing a window with single-chamber glass and a 3 chamber profile, in all other cases, 2 chamber windows and a 5-chamber profile (or more cameras) will be preferable.

So you decided to change your old windows on new plastic. You bypassed and called a huge number of window companies, but there were only more questions. You do not see what is different window company From the other and how the plastic windows are distinguished by one company, from the windows offered by another company, and if there is no difference, then why pay more?

And here you make the most common mistake - you start looking for a company that can offer a minimum price for plastic windows.

You should not hurry, now we will figure out and what the windows are different and that the window companies are trying to hide from you.

PROFILE

When it comes to the PVC window, the most common question is specified - "What profile are your windows?". At the moment, there are more than 40 manufacturers of profiles on the market and each manufacturer in its arsenal has a large number of Different profile lines.

All European manufacturers offer a quality product (Kbe, Gealan, Veka, Rehau, Schuco, etc.) - a guarantee for such a profile for at least 40 years, such a profile does not crack and does not yellow. Somewhat other picture with Turkish and Chinese profile systems. Without going into unnecessary details, I will say that the European manufacturer is preferable, and they simply forget about the rest, especially since there is practically no difference in price.

As we have already spoken, each manufacturer offers not one, but a whole range of profiles. Various profile systems differ from each other thick, the number of seal contours, design. As for the design, here as they say and color, the number of sealing contours does not affect the purge and overpay for it is definitely not worth it, but the thickness of the profile is the factor not unavailable.

For the middle band, the recommended profile has a thickness of 58-60 mm, but in practice at low temperatures in places of fastening the loops, the bridge of cold occurs and freezing and formation of land occurs. We recommend the profile from 68 to 84 mm and the double-glazed windows in such a profile can be installed thoroughly. The difference with a thinner profile is insignificant, but the rigidity and thermal surgery of such windows is much higher.

Many manufacturers produce, the so-called object profile, for installation in non-residential premises, Outwardly, this profile does not differ from the usual, but the thickness of the walls of such a profile is significantly thinner and plastic used in such profiles is plastic recycling. Many companies wanting to give the most low price On the market, they sell such windows under the guise of ordinary counting on the client's uneducation. But it is not about us.

It is not easy to identify such a profile: the protective film often does not have any inscriptions at all, or there is a word: an object, Object, Engine, tender or something similar. Be extremely attentive - this profile categorically cannot be used in residential premises, it does not have the required rigidity, thermal conductivity and can highlight an unpleasant odor.

Waterpressure Planck

The overwhelming majority of companies do not install waterfront planks, mandatory installation. Water-grades protect you from water from getting during the rain in ventilation mode (in folding mode)

There is a chance that such a company could save on something that it turns out only during the operation of the window.

REINFORCEMENT

Plastic windows correctly called metalplastic, since inside the plastic profile reinforced with metal. The metal gives strength and stiffness of the structure, but reinforcement is inside the profile and hidden from the eye of the consumer than the unscrupulous sellers enjoy. They simply do not reign their windows. Such windows are very often installed in new buildings.

Take the magnet, and the frame and the windows sash must be reinforced with the metal, which is easy to check the magnet. If you failed to find metal using a magnet, then let such a window look for another owner.

ASSEMBLY

In order to collect a high-quality plastic window, it takes good (read expensive) equipment, special stands for adjusting accessories and check welds and qualified wizards. This can afford only a major manufacturer.

Otherwise, as a result, not the correct geometry of the window, a bad fit, blown, the quick access of the fittings. The quality of the assembly is very difficult to determine the eye, you need to do measurements and so on, so just ask the seller who is the manufacturer. If this is a small local company in a small town, then you cannot be any quality and speech.

Furnitura

Furnitura is very important component Your window, the quality of fittings determines the service life of the window and how comfortable it is comfortable. Here the leaders are the Germans. These are Roto, Siegenia-Aubi, Maco, all the rest avoided. But also establishing high-quality fittings have a lot of ways to save.

Error blocking blocker

I miss the installation! If you opened the window, and then transferred the handle in the folding mode and the window was hung on the same bottom loop - it means that the block is not installed. This window will not serve for a long time, and may cause harm to health. We witnessed when the sash simply fell out, almost killing a small child.

Be sure to purchase and after the window you already mounted, check the presence in the block of the block.

Response Planck

The response plate is placed on the inner perimeter of the frame and is responsible for the density of the constructor. After all, we chose plastic windows for their tightness and energy-saving properties.
The number of response planks depends on the size of the window, but they cannot be less than 4.

Note!

We know the companies that put 2 response slats on the window, nullify all the advantages of plastic windows. In this case, the window will blow, and you can form a land on glass and windowsill.

Often, cheap plastic handles are installed on the windows that quickly fail. Good handles are produced by Maco and Roto companies, which should be written on the handle. These handles are made of aluminum and plastic covered, from cheap plastic differ in high weight and for a long time operation.

Sucks

High-quality slopes are made of insulated sandwich panels. On such slopes, fungus is not formed, they are warm, tough and do not have joints.

The junctions between the slopes should be linked with liquid plastic, and not silicone, which in the month black and fall off. The jokes on the slopes are flashed with liquid plastic.

Liquid plastic has a tight structure as PVC from which your windows are made, which means liquid plastic It will not differ in color, it does not form fungus and it does not crack because It has the same expansion coefficient.

Many companies continue to use not high-quality cold wall panels, luring the gap sealant. As a result - cold slopes, fungus, silicone must be changed every half a year, Silicone darkens and looks so much worse.

INSTALLATION

Be sure to use vapor-permeable psyl tape (pre-compressed sealing tape). The tape is needed to protect the foam from the sun and remove moisture out of foam.

But cops requires protection against ultraviolet, for which naschelniks are used or external slopes.

We told only some ways to save. The rest are either less significant, or to identify them without a specialist is not possible.

Both are attentive when choosing plastic windows.

Do it bring harm to human health plastic windows? What is included in their composition? What windows are better - wooden or plastic? What windows are installed in Europe? There are many questions, the main thing is to know the right answers and dispel all myths among buyers.

12/10/2010

European manufacturers are not only leaders in the production of plastic windows, but also in their consumption. Information that Europe goes back to old wooden windows, just a myth. Today, the market shows a huge range of windows from the European-made profile, which in appearance and texture resembles a tree. The basis of such "visual wooden" windows is the same design and composition, as in conventional white plastic windows.

Information that lead is addicted to the windows, which is harmful to health, is also not justified. Yes, really manufacturers produce pVC profile with the addition of a small amount of organic lead salt, which is dangerous only in the production process, and not in ready product. Plastic profile Also "harmful", like ordinary glass.

The plastic windows presented in the modern market are characterized by high quality and harmless environmental impact. The European Union and the Environmental Protection Commission made environmentally friendly production. Therefore, since 2005, producers are replaced in the production of PVC lead salt to the composition of calcium and zinc, which is an absolutely new standard and supports the purity of ecology at all stages of production and processing of the profile, as well as when operating windows. In Denmark, Switzerland and Austria, a ban on lead has long been introduced, and manufacturers do not use these mineral salts.

Plastic windows - an environmentally friendly component for construction and design of premises, which has a lot of advantages. The function of energy saving and sound insulation already justifies the selection of plastic windows. Durability in operation, lack of additional annual care, airflow adjustment, variety of forms and structures, dust and insect protection, available prices for plastic windows - all this is the advantages of plastic windows.

Think only: noise, drafts, insects, additional care and financial costs for maintenance, wooden windows cover with paints and varnishes, short-life in use ... Do you want to get all these problems and anxiety? European residents choose comfort, health and savings - and this is another reason to take a good example.

_

The windows are absolutely natural and familiar elements of the building. The windows, first of all, serve as a source of daylight and provides visibility. But also window, as architectural element, expresses the individuality of the building. At all times, architects and architects paid special attention to the combination of forms and configuration of windows in the appearance of the building.

The oldest windows were not glazed holes in the walls that passed into the room fresh air And daylight. First window Stekla appeared in Rome And the glazing received widespread in the XIII century. In church construction, and in the XVI century. In residential construction. The emerging variety of windows of windows indicates their importance in architectural aesthetics.

Form, Material, Grade and Other Features Window structures B. different countries Dictated by climatic conditions of the terrain, the level of development of technologies and construction traditions.

American windows

For example, Americans are distinguished by their practicality, the optimal use of space and comfort. Therefore, for America Characterized windows with a sliding opening system. Most of the windows occupy systems with a vertical direction of shift shift. Such windows have been popular for a long time and we all saw them in American films.

Vertical shift design The windows do not have a loop, the sash rises up and fixed in this position with special clamps. In the southern regions of America, the deaf windows using a narrow profile are common.

German windows - practicality and durability

The main criterion for choosing windows in Germany is the durability and operational strength of structures. Exactly Germany is home to plastic windowswhich have high thermal insulation, reliability, practicality and ease of care and operation. German windows in most cases are equipped with a rotary-folding fitness.

The German profile Rehau systems are known and popular all over the world. The company for many years is the leader of the production of profile systems due to high quality, which is controlled at all stages of production; Big selection of systems for consumers with different sufficiency, as well as through the introduction of advanced technologies to achieve maximum indicators of protection and durability of structures.

English windows

Traditional English windows are distinguished by their height and narrowness, they are usually divided into square sections that can be deaf, open out or vertically. This method of opening allows to maintain the maximum of the internal space, which is characteristic of foremost English. Interestingly, the British do not put double double glazed windows, and mostly single single, although the average annual temperature is quite low.

Double frames of Scandinavia

Windows in Scandinavia countries differ significantly from European windows. Modern and so popular plastic windows did not fit in Scandinavia countries, instead of the Scandinavians use wooden windows similar to Soviet.

Cold climate of countries led to the use of windows with double frames. The inner frame is equipped with double double glazing, and the outer one. The entire design of the window is equipped with a single shut-off mechanism.

Windows in Italy

The feature of the windows in Italy is determined by the warm climate of the country. Windows have wide outdoor slopes, Which allows you to protect the inner space from sunlight and save coolness in the house. Windows usually have small size What is also explained by the predominance of sunny weather. Italy is also characterized by an arched form of windows.

French charm

The French are very good natural light premises. Therefore, the windows in France are large, often used glazing from floor to ceiling, the so-called "French balcony". Big windows Allow the sunny light to fill the space, to make it spacious, warmer, visually erase the border between nature and the room. Interesting feature french windows - this is thorough number of sash. Folds open inside the room.

French windows are usually made of plastic. Wooden designs Not popular, since the French take care of the environment. France is popular and mansard windowslocated in the roof of the house.

Windows in Ukraine

In winter, there are quite low temperatures for Ukraine, so high thermal insulation is one of the key factors when choosing glazing. Therefore, plastic windows are popular on the territory of our country using multi-chamber profile systems and double-chamber windows with an energy-saving coating.

Traditionally, the windows consist of two or three sections, open inside the room with a rotary-folding fittings. But in new buildings more and more often use panoramic glazing.

Plastic windows spread throughout the world. The combination of prices, functionality and reliability has provided them with great popularity. However, each country has retained its own "window traditions", in consent of which the PVC windows are made and installed.

British plastic windows

In Britain traditionally make narrow and high window openings, under which the PVC windows are created. If you build your home in english style, Take care of the search for just such windows, since for our realities it is a rather non-standard form. English window designs are made up of small square sections that do not have loops and shift on special wheels. Another English, as a rule, do not put double double glazing, despite the fact that the average annual temperature in the country is rather low.

PVC windows in France

The French put the windows that open the inside of the room. The number of sash is necessarily even. The French love when the room is well lit sunlight And when the room can be quickly ventilated. In France, the panoramic windows, floors from the floor to the ceiling and attic structures, were distributed and popularity.

Scandinavian windows

Scandinavans for PVC windows are not accustomed. They most often use conventional wooden windows, which are very reminded by Soviet. Due to the cold climate, windows with double frames and a single shut-off mechanism are set. The outer frame has a single glass, and the internal contains double double glazing.

Plastic windows in Germany

The Germans are famous for practicality in everything, including in the approach to the glazing of their own dwelling. In Germany, it is customary to put windows from a metal-plastic profile, absolutely hermetic, which will serve at least 50 years. As a rule, it is one-frame structures with the possibility of opening the sash vertically and horizontally. Such windows were widespread in our country.

Italian plastic windows

In Italy, very often window openings have the form of the arch, so the windows of arched form are often called Italian. Italian window is a wide design of arched shape, sometimes with aluminum profile. In order to keep the room in the room, the windows put deeper in the wall than, for example, it is accepted from us.

American tradition

The inhabitants of North America are used to using window designs without hinges with a vertically-sliding opening mechanism. Such windows are often visible in American films.

Where to order PVC windows?

Swipe your home original and efficiently. Ordering windows with us, you get products high Quality. Schedule with style, and if you need any consultations, call us!

Problem: Housing and construction cooperative to which I belong makes me put plastic windows in my apartment. As asthmatics, the quality of the air, which I breathe, is very important for me, and I am very concerned about the harm of PVC.

PVC - polyvinyl chloril or "vinyl", as it is also called in a reduction - one of the most popular species of plastics used in the modern world, it can be found everywhere, starting with toys and ending with computers. But, it is also considered potentially dangerous material. And this is why: the main problems of PVC are the initial stage of production and the expiration of its shelf life. In the production process, the main components, such as ethylene and vinyl chloride dichloride, are thrown into the atmosphere in the form of gases. These are carcinogens, they lead to damage to the liver, kidneys and nerves.

But this is not all when PVC is disposed of, say, burning it, dioxin emission, one of the most toxic substances in the world.

And here is your health concern, and it is not surprising, because the reasons for concern are a bunch.

The main commercial move in sales window Rams From PVC is that they are practically nothing worthwhile. But ultraviolet radiationUltimately makes material fragile and loose. And while it is destroyed, PVC exudes toxic gases, like vinyl chloride, which inevitably penetrates the house.

But in addition, PVC contains a wide range of toxic additives, in particular, stabilizers with heavy metals, fungicides and "plasticizers". Plasticizers are phthalates, it is believed that they contribute to the emissions of gases, and give the characteristic smell of vinyl. Most phthalats are used to mitigate PVC, but sometimes they are added as hardeners to prevent PVC brittleness, such as window frames.

Studies on animals have shown that it is toxic than PVC itself, the thyroid gland and kidney cancer are caused, possibly due to their impact on the endocrine system. Being fat soluble, they have the ability to accumulate in the body. And the steps have already taken to prohibit phthalates in plastic nipples on children's bottles, children's toys and plastic pipes In hospitals. However, a wider ban is still to be.

Recently, the Danish-Swedish team conducted a study in which more than 10 thousand children took part and found that phthalates can be one of the key factors of a sharp increase in asthma and allergies in childhood. They found that asthmatics children lived in houses with a high concentration of phthalats in home dust.

In 1995, Sweden put forward a ban on all PVC products, and in Denmark Introduced PVC products and phthalates. More than 150 European communities have already been banned by PVC or conduct policies on the phased abandonment of their use in public buildings.

Is there an alternative to PVC windows? Yes, traditional wooden windows. Modern, high-performance wooden windows require minimal maintenance And they will serve over 50 years, while PVC windows are only 20-25 years old. (Once it is positioned as a product with a "lifelong guarantee", PVC come into disrepair faster than expected, which means that the release of toxic gases is much larger than expected initially).

In addition, wooden windows can be restored after 50 years, while plastic windows should be completely replaced in each generation.

Wooden windows are much cheaper than PVC, and they do not require such a frequent replacement as PVC. Show this article local housing cooperativeAnd if it does not move from the place, then it's time to move this topic yourself.

http://www.healthy.net/