How to make liquid plastic with your own hands? Manufacturing technology and scope of means. Wood-polymer composite or liquid tree

1. Description I. chemical composition
2. Polymer and Tree ratio
3. Benefits of material

On construction and in the manufacture of furniture, new high-tech materials with improved properties are applied, compared with the usual of the same class, and their price is lower. One of these materials is a wood-polymer composite (DPK). Now it is widespread, which is associated with accessibility and low cost. He is cheaper than ordinary treeBut it has the same strength.

In the manufacture of the composite use natural wood and a polymer who does not harm human health. Usually, the DPK is obtained by casting method, which significantly increases its strength.

Composite can be used when laying flooring. It is used when installing the railing on open terraces, in conversations, on balconies, because resistant to temperature drops, any precipitation, mechanical effects. This makes the DPK universal. The material has a beautiful structure.

DPK is distributed in the USA, where it is actively used in the construction of cottages. Production technology, characteristics It is important to know if you chose this material. If you know the features of the process of manufacturing a liquid tree, then you can make a composite with your own hands.

Description and chemical composition

Polymer compositecalled a liquid tree is artificial materialderived from the mixing of wood and monomer. In the process of manufacture, an extrusion is taken forming a polymer. This method is made by a polymer board, the strength is superior to the usual tree, but a little inferior ceramic tiles. The boards themselves acquire the form in the casting process.

The "liquid tree" is produced by adding bonding polymers to chips: polystyrene, polyethylene, polypropylene and polyvinyl chloride. The name "Liquid Tree" DPK received due to flexibility and plasticity.

The "Liquid Tree" is used in the production of genital boards, siding, pipes (for water supply, sewage), furniture.

The chemical composition of the DPK includes only 3 components:

1. Small wood particles (chips, sawdust, crushed wood, abroform, in cheap models come across the cake from sunflower seeds, crushed plywood). The number of additives can vary in composition from 1/3 to 4/5 of the total mass.
2. Polymer additive - polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP).
3. Special chemical additives that improve significantly technical properties, appearance (dyes, varnishes). The volume of these additives is 0.1-4.5% of the total mass.

Polymer and Tree ratio

The proportions of the ratio of polymer and wood can be different. The selection is carried out with what technical indicators of the DPK are required.

Tree (Abroform) to the polymer belongs as 2: 1. This ratio gives the DPK of the Wood Properties - the mass will contain more fibers of the tree. Boards from such material will swell from moisture, which significantly reduces the service life in the humid climate. For middle strip And the south of Russia it will be 5-10 years old. The DPK is relatively fragile, which limits its application, but the building material has a beautiful texture of the tree and the "corrugated" surface.

The ratio of wood to the polymer, like 2: 3, significantly worsens the appearance of the DPK Board, which limits the use of boards in decorative purposes. On the touch, the board resembles ordinary plastic, and the surface becomes smoother (sometimes slippery).

If the wood-polymeric composite has the ratio of the fibers of the tree (Abroform) to the polymer 1: 1, the board acquires optimal characteristics. The texture is beautiful, with a rough surface, non-slip. The casting process is simplified: it is not necessary to warm the components to the desired temperature. Preparation of DPK this way does not transmit the properties of the tree material: it does not absorb moisture, does not swell, relatively durable in use.

The liquid tree is poured into special forms that provide for the presence of spikes and grooves for fastening boards.

Benefits of material

The DPK is resistant to the effects of ultraviolet: it is not cracking, not deformed. It does not change its structure when low temperatures air, exposure to moisture, acids and other negative environments.

The material is resistant to mold, insects are not breeding in the DPK, it is not bait for mice, rats and other rodents. For greater stability, it can be covered with a special polymer film.

Another plus is higher strength (it allows you to withstand more than 5 c per 1 m 2). This makes it possible to place any heavy furniture on the boards.

Liquid wood - flexible material that is easy to process. It can be cut, overshoot. This is taken into account in the production of polymers or in the process of casting.

Liquid tree is an environmentally friendly material, since the used abstracts and polymer are not isolated to poisonous substances and do not pose a hazard to humans. DPK is not a fuel and does not support burning.

Is it possible to make it yourself?

You can make a "Liquid Tree" (Abroform) at home, with DPK, made with your own hands, will have the desired characteristics. Billets are suitable for restoration works (furniture), rough flooring for auxiliary premises, arbors, terraces.

To make a liquid tree, you need to take woody sawdust and chop them with homemade mills or coffee grinding. PVA adhesive is added to the mixture (the ratio of sawdust and glue 70:30). The resulting mixture should be thick. So that the material had needed colorIt is recommended to add a paint (enamel) of suitable color.

The resulting mass is an analogue of the DPK. The material can be applied to damaged parquet areas, laminate, furniture.

If you pour the floor with such material, then it is necessary to make a formwork for it, and the mixture itself is prepared in the desired volume. Then you can proceed to the fill. Recommended thickness of the future board - 50 mm.

Details You can cut and drag each of them manually, but this technique is very imperfect: it takes a lot of strength, and it is impossible to get two absolutely identical products. Therefore, in this material you will learn how to make the casting of plastics at home.

What can we need

For its own molding of plastics, we do not need any special tools or materials. Pretty model, a kind of matrix, we can make almost anything from metal, cardboard or wood. But regardless of which option you chose, in any case it is necessary to impregnate with a special solution before the start of work. It is especially true for wood and paper, because they actively absorb moisture and to prevent this process, we need to fill the pores, preferably liquid wax.

Silicone.

If we stopped at this option, you should buy it with the smallest viscosity - it will contribute to the best cutting part of the part. Of course, the results will be more accurate. There is a great many varieties in the modern market, and it doesn't make sense to compare them: we do not have time for it or the opportunity. We can only say with confidence that the sealant for cars is ideal for coating, preferably red. Pouring plastic at home will be much easier.

We are determined with injection molding

Honestly, the materials for casting exists even more than silicone varieties. Among them there are liquid plastic, and ordinary gypsum mixed with PVA glue, and even polyester resin. Some less popular substances enjoy cold welding, Metal lightweight, and so on. But in our case, we will be based on some other characteristics of substances for casting:

• The term of their work.
• Viscosity.

Regarding the first point, it means the time, during which we can carry out manipulation with another unweathered material. Of course, if the manufacture of plastic products occurs in the factory conditions, then two minutes will be more than enough. Well, we do this at home, you need at least five minutes. And if it happened so that suitable materials You could not get it, then they can be replaced with a simple epoxy resin. Where to look for her? In auto shops or in stores for fans of aircraft modeling. In addition, such a resin is often found in ordinary shopping stores.

Making a split form

This ideal is suitable for pouring plastic with their own hands, because it is possible to pour unusual types of resins. A small cunning of such a technique can be considered that at the preliminary stage, the entire surface of the model needs to be treated with silicone, and then after the material solidifies the entire material, the matrix can be trimmed. After that, we remove its "insides" that will be useful to us for further casting. In order, we came up with the form, you should apply a three-millimeter layer of sealant, after which we just wait until the material hardens - usually it takes two hours. In this case, apply it preferably a tassel. Applying the first layer, we must try to fill with the material all irregularities or voids, so air bubbles subsequently not formed.

How is the casting process

First step.

We take a form for casting and carefully clean it - it should be dry and clean. All remnants of the material remaining after preliminary procedures must be removed.

The second step.

If there is a need, we can somewhat change the color of our composition: for this you only need to add one drop of paint into it, but in no case is not water (in liquid plastics to them personal hostility).

Third step.

There is no need for the degassing of our injection molding. This can be explained by the fact that the casting of plastics at home initially provides for the relative shortness of its "life". At the same time, in order to extract air bubbles from small-sized products, it is necessary only to carry them out after infusion.

Fourth step.

We thoroughly mix all the necessary components and pour it into the shape of the template slowly, thin jet. This should be done until the mixture will fill the entire volume and some more share of the channel for casting. And soon, when the degassing procedure occurs, the volume of this material will significantly decrease and will become as we need.

AND last Council: In order for the model quality to be high, cool the template is needed gradually, slowly. So, observe all instructions and everything will succeed!

Ecology of consumption. And technique: people learned to turn processing waste natural materials In the products, ahead of these materials by properties. From articles you will learn about a completely new material - a wood-polymer composite or DPK.

The last 40 years of industry development can safely be called "era combined materials." Modern equipment And technology allows you to combine, it would seem incompatible: wood, concrete, plastic, paper, metal. All of them are mixed, diffusively, they are melted with one goal - to get a new product that combines the best properties of several source materials. So, among other things, we saw a "liquid tree".

What is a "liquid tree"

Speaking technical languageThis is an extruded wood-polymer composite (DPK). This means that the wood component is canned with plastic. In such a combination, the material takes the best properties:

1. From wood - compressive strength, impact resistance, elasticity. At the same time, the wood component is almost free - any waste, crushed in flour, go into the course.
2. From plastic - corrosion resistance, flexibility, processing accuracy. The polymer envelops wood particles and eliminates the main drawback of the tree - destructive reactions with water. The polymer in this technology is 90% secondary plastic, i.e. recycled waste.

The technological process is easy to understand, but quite complicated for execution. The polymer (plastic) is mixed in a certain proportion with wood flour and heated so that it melted. Then form in extruder, on rollers or in molds and cooled. On the different stages About 10 different additives are mixed into the mass - plasticizers, catalysts, hardensions and others. All the details of the manufacture - the grade of wood and plastic brand, the proportions of the mixture, additives, temperature modesAs a rule, make up a production secrecy. It is known that all ingredients can be purchased in a free sale, and for wood flour, the bamboo, larch and other robust breeds of the average price category are predominantly choose.

For the manufacture of DPK, special multi-stage production lines are created. They consist of a variety of devices and controllers. Collect such a machine with your own hands in the garage, unfortunately, will not work. But you can purchase a ready-made production line.

Products from DPK.

Currently, the product range is incomplete, since the material is relatively new and its properties to the end are not studied. However, several of the most sought-after positions can be mentioned now.

Terraced board or decong

It is up to 70% of all demanded products from DPK today. Most of the supplied production lines are focused on the release of such a board, since it is the only one on this moment Alternative to wood. The board consists of a perimeter frame, the rigid ride inside and has a puzzle fastening system. A variety of colors are offered.

Benefits Before traditional material: From the tree, the DPK Board is beneficial to solid processes and the best physical indicators (strength, flexibility, processing accuracy). Many types of DPK boards are produced by bilateral - with the reliefs of the wood array and ribbed cutting.

DPK terraced board on video

Facing facade panels or plaquene

By big account, they can be correlated with vinyl siding - The principle of installation and the structure of the panel they are very similar. But the DPK panel is much thicker and tough, respectively, has larger weight And the best physical properties.

Advantages over traditional material: a more durable and durable facade, sinuses in the panels and thick walls are better kept warm and absorb noise.

Fences, fences, perilla, balustrades

Molds of small architecture from "Liquid Tree" for decorative finish Exterior and landscape. Have good carrying ability And suitable for intensive operation (in crowded places).

Such products were made to perform from wood (short-lived and requiring care) or concrete (heavy, cold and not always reliable). Wood-composite forms make national teams, and all the details are designing in advance. There remains on the spot only to assemble them with the help of a grinder and screwdriver. Such a fence does not require a powerful foundation, constant coloring. In case of damage to the site or structure element, it can be easily replaced by making an additional number of parts.

The overall advantage is the absolute insensitivity to atmospheric wear (moisture, frost, overheating in the sun), insect, fungi and abrasion.

The overall drawback is relatively large oscillations when heating and cooling. The expansion of the DPK terrace board can be up to 6 mm per 1 m (with gradual heating to +40 ° C).

Prices for facade panels from Liquid Tree

Name	Manufacturer	Characteristics	Price 1 m 2, y. e.
Duo Fuse FPS-22	Belgium	2800x220x22 mm, PVC	35
"Multiplast"	Russia	3000x166x18 mm, PE	20
Rindek	Russia	3400x190x28 mm, PVC	22
Multideck Chalet.	China	2900x185x18 mm, PE	17
Cm Cladding	Sweden	2200x150x11 mm, PVC	28
ITP ("INTEKHPLAST")	Russia	3000x250x22 mm, PVC	26
Dortmax.	Russia	4000x142x16 mm, PE	18

How to choose a terraced DPK board

Any kind of "liquid wood" is made of wood flour, the composition of which is not so important. But the composition of the polymer, which is added to it may be crucial:

1. Polymer based on polyethylene. Easier and cheaper in production. Contains large quantity Sawdows, due to what he is cheaper analogs. Prone to UV radiation (without additives).
2. Polymer based on PVC. More resistant to temperature drops, ultraviolet, large fire safety. Durable 2 times compared with other compositions.

By the type of profile, terraced boards are divided into two types:

1. Forty. Consider significant shock loads. It is well suited for places with a large passability - summer cafes and verandas, decks of ships, embankments and piers.
2. Hollow. Have low weight. Suitable for terraces of private houses.

By type of connection board, DPK are divided into:

1. Suture. Mounted with a gap of 3-5 mm and provide a good removal of water. Mashed metal or plastic cleans.
2. Seamless. Create a solid durable surface by mutual clutch. Must with self-drawing, clemmers are not required. Suitable for summer sites of a cafe - small things, heels, etc. do not fall into the gaps, etc.

By type of anti-slip or processing:

1. Treated with brushes ("Brashring" from English. Brush - brush, brush). The surface created by a metal brush (artificial aging).
2. Grinded. The surface is processed by the emery web.
3. Embossed. Typically, executed in the structure of the tree. Good decorative ViewBut in the passable places the drawing is grieving and it becomes noticeable.
4. Co-extrusion. The upper layer is performed from high strength composition and is structured during the extrusion of the board itself.
5. Co-extrusion with deep embossing (from English. EMBOSSING - embossing). Embossing on top layer Mimics valuable wood species.

To pay attention regardless of the type of board selected:

1. Height Ryube. It depends on the strength of the board.
2. The number of ribbiness. It affects the flexural strength - than them more, the higher the strength.
3. Wall thickness. Thin walls (2-3 mm) do not keep loading loads.
4. Width of the board. The wider the board or panel, the faster and simply mount And less required fasteners.

Video - how to choose terraced board DPK.

It is absolutely possible to accept these tips in relation to facade panels And other DPK products for plane cladding.

The industry provides an average opportunity to make its choice - use the new natural material to which they go natural resources (wood, stone) or apply recycling products. Today, people have learned to convert natural material processing waste into products, ahead of these materials by properties. However, the choice remains beyond a person - either dispose of garbage, acquiring the DPK, or create it more and more, giving preference natural materials. Published

22.05.2015

Plastics made of wood mall (TIR) \u200b\u200bare manufactured by its piezotermic treatment in molds that ensure the details of the desired configuration.
Materials. For the manufacture of wood press masses different species Apply a piece veneer with a thickness of 0.5-1.8 mm, humidity up to 12%, waste of wood layered plastics, waste of woodworking industries - chips and sawdust. Wood waste should not contain the inclusions of the cortex and rot, and the chipboard waste is cut into a segment up to 120 mm long for the possibility of loading them into the crusher.
The bakelite varnishes of SBS-1 and LBS-3, a phenoloformaldehyde resin SFJ-3011 and phenolospirts B and B. The bakelite varnish concentration of the bakelite lacquer must be 43-45%, and the phenolofehyde resin 28-35% should be 43-45%, and the phenolofoodheid resin. As additives, which improve the properties of TIR products, use mineral oil, oleic acid, dyes, aluminum powder, silver graphite, copper powder, etc.
Technological process of MDP production. The technological process of manufacturing TIR consists of the following operations: preparation of conditioned conditioned particles, preparation of a working solution of binder, dosing and mixing wood particles with a binder and modifier and drying of the mass.
Features of the technological process of manufacturing TIR are associated with the type of applied wood waste, in the manufacture of a mold of a sawdust (Fig. 106, a), they are sieved on vibration with 10x10 mm cells for a large fraction and 2x2 mm - for shallow. The conditioned particles come into the dryer, where they are dried at 80-90 ° C to a humidity of 3-8%. For drying, drum, ribbon and aerophoned dryers are used.
When used as a raw material of a lump veneer and waste chipboard technological process Includes the operation of grinding wood in crushers (Fig. 106, b). For chopping veneer, hammer crushers, such as DKU-M, are used for grinding veneer. Drinking veneer is made by knives and hammers installed on the machine rotor. As grinding to the desired fraction, the particles are thrown through a replaceable sieve and removed by pneumatic transport to the bunker. As a result, particles of needle-shaped wood particles 5-60 mm long, 0.5-5 mm wide, 0.3-2 mm thick. For chopping waste, the chipboard is used by the Hammer crusher C-218, irritable and sorting particles. The length of the particles after crushing is 12-36 mm, the width is 2-7 mm, the thickness is 0.5-1.2 mm. The dimensions of the particles depend on the assignment of TIR.
Wood particles with binding mixed in worm-blade mixers, and sawdust - Iv mixers-runners. Rollers of runners when moving through a layer sawdust crush them into fibers, which further provides increased physicomechanical properties of TIR products. Wood particles and binders are dosed by mass. Mixing them is made by supplying wood particles by portions of 80-100 kg. The temperature of the impregnation solution depending on its viscosity 20-45 ° C. The duration of mixing in worm mixers depends on the type of particles. Sawdust, chips and veneer particles are mixed for 10-30 minutes, and particles of chipboard - 15-20 minutes. The amount of dry resin in TIR should be 25-30% and 12-15%, respectively). The duration of mixing in the runner mixers is 30-40 minutes, and the content of dry resin in the press is 25-35%.
Modifiers in mixers are fed after loading the impregnating solution in the following quantity,%: oleic acid 0.8-1.5, Urotropin 1-3, dyes 2-5, graphite 2.5-10, aluminum powder or copper powder 1.5- 3, mineral oil 10-20.
Drying the molding is performed at 40-50 ° C for 30-60 minutes to a humidity of 5-7%. For this purpose, the same units are used as for drying raw wood particles.
Technological process of manufacturing products from TIR. For the manufacture of TIR products, it is possible to apply as a bulk mass or as a briquette resulting from its pre-seal. The use of briquettes allows you to more accurate TIP, 2-3 times to reduce the volume of the mold boot chamber, speed up the pre-warming process. Briquettes of the form corresponding to the form of the product (cylinders, parallelepipeds, etc.) are manufactured in special briquetting presses or molds. Briquetting is performed under a pressure of 20 MPa. At temperatures up to 25 ° C, the duration of the exposure under pressure is 1 min, at 50-60 ° C - 0.5 min.
To reduce the pressing cycle of products from TIR, it is preheated. At 60-70 ° C, the heating lead 30-60 minutes, and at 140 ° C - up to 5 minutes. The most uniform heating is achieved in the TWH field. Also applied convective, induction and other types of heating.
Products from TIR are made by hot pressing in hydraulic presses in steel molds closed type. Pressing is carried out by direct and injection molding methods (Fig. 107). With direct pressing, the pressure acts directly on the mass in the mold cavity. Under injection molding, TIR under pressure flows from the loading cavity into the forming, direct pressing is used in the manufacture of simple and large-sized products. The injection molding is made by products with thin walls and a complex configuration. In the process of pressing TIR, heats up, softened, compacted, spreading in the cavity of the mold, and cures.

Pressure when pressing TIR, which has a weak fluidity depends on the configuration of parts and pressing method. With direct pressing of parts with a direct circuit, it is equal to 40-50 MPa. With injection molding of parts with a figure outline in the process of suggesting the press mass in the form of a pressure of 80-100 MPa, with pressing - 40-50 MPa.
The temperature of the mold with direct pressing 145 ± 5 ° C. The duration of pressing depends on the thickness of the wall walls. For products with a thickness of the walls up to 10 mm during the heating of the matrix and the punch, it is equal to 1 min / mm, when heated only the matrix - 1.5-2 minutes / mm, for products with a wall thickness of more than 10 mm - respectively 0.5 and 1 min / mm.
in the injection molding press, the TIR is first compacted at a mold temperature of 120-125 ° C for 1-2 minutes. Multification to the form is performed at the same temperature. The end of this pressing period is determined by the time to start the pressure drop. Pressing is performed at 145-165 ° C for 4 minutes. After the end of pressing the product is cooled.
Products with a large surface of contact with the mold are cooled with it up to 40-60 ° C. Thin-walled products are cooled in a clamping state in special fixtures under a pressure of 0.2-0.3 MPa. Details of a simple configuration and part, to the sizes of which do not make high demands, are cooled in a free state.
Mechanical processing of articles from TIR consists mainly in removing incoming and sprues. Additional mechanical restoration In order to change the shape and size of parts, it is made on metal cutting machines.
In the production of 1 T TIR, it is consumed: dry wood 1.8-2 m3, resins 600 kg, ethyl alcohol 340 l, steam 2 tons, electricity 70 kWh.

Business idea for organizing the petrogenous production of products from various injection materials at home. Thanks to innovative technologies, today in the manufacture of plastic products, you can do without expensive machines thermoplastic machine guns. Moreover, it is possible to establish small-sector mini production right on your desktop. This business idea can be viewed in two directions:

1. As the main business for the manufacture of finished products and forms by casting from: liquid:
   • plastic;
   • silicone;
   • polyurethane;
   • transparent resin. and other materials.
2. Making forms as an effective addition to other types of business in the area:
   • construction;
   • food Industry;
   • soaps.

In the first and second cases, casting at home does not require large investments of financial resources. You can start the injection molding business now.

Manufacturing with liquid plastics

The manufacturing process is carried out using liquid plastics and silicone forms. Now there is an opportunity at home to produce plastic products with small series:

• souvenir products;
• toys;
• jewelry;
• spare parts for autoiveuning;
• spare parts for different mechanical devices;
• footwear;
• dishes.

There are components for the manufacture of details from thin-walled plastic, which can significantly expand the product range and make parts of any complexity. For example, mixing two components of the AxSon Fastcast F32 brand from the French manufacturer allows you to get a super-liquid plastic, which reaches the smallest folds of the model shape of the model. In addition, he is harmless to children and does not smell.

Preparation for production

For the organization of production, the sample model is required primarily. It first needs to be made of special silicone or polyurethane components. With the experience and quality of materials, you can learn how to shoot forms with models at such a high level, which will even see fingerprints on products (if necessary). That is, a copy will be at the level of identity, which cannot be distinguished by non-armed eye. Plastic products you can give complex compounds with any relief. If there is no finished model for the sample, but you need to make unique products, it can be ordered from the owners of a 3D printer. By the way, casting significantly exceeds the performance of 3D printing from plastic.

When your product is ready to be issued using concomitant products, which is attached to liquid plastics:

• paints for art effects;
• primers;
• glue.

Naturally, in some cases, it is not necessary to do without creativity, and you have to manually paint the products that can affect performance. But the creation of each business is undoubtedly a creative process. After all, finance management is art.

We make a product from liquid plastic

Technology for creating an ideal small relief in the manufacture in silicone form with their own hands. First you need to prepare all components and materials. We will need:

1. Selikon Platinum.
2. Liquid plastic Axson Fastcast F18 (color white, has a consistency of water, odorless!).
3. Color silicone dye.
4. Polyurethane varnish.
5. Libra.
6. Syringe.
7. Pillet Baf.

We securely fix the model-sample at the bottomwork of the formwork for forming a form, with the help of neutral wax plasticine (to avoid silicone leakage). Krasch silicone, from which the ready-made form in the scarlet color, so that the form clearly shows the quality of the mixing of the components of the liquid, white on the color of the plastic. Useful advice: In order for the form to be perfect, a pre-model-sample model to deceive with silicone with a wide brush. Thus, gently fill all the deepening of the relief of the compound. Only after that, pour shape completely. Silicone fill the whole formwork. We leave on the fastening of the form structure 7-8 hours. The most difficult behind.

Congratulations !!! Now you have a finished form for repeated production of copies of the model model. Before you start, make sure that the form is completely dried in order to avoid the formation of bubbles. Then very thoroughly mix the components of plastic 1: 1 by weight (for this it is better to use pharmacy or laboratory electronic scales). Catching time is 7 minutes, but for a complete consolidation it will take another 20 minutes. This plastic is neutral to silicone and does not stick to it. But after repeated use, the compound over time may need a lubricant-separator with the protective properties of EaseRelese. After the expiration of the required time ready productwhich is copied exactly according to the sample.

Polyurethane forms for construction

Together with plastic products You can produce molds for casting. The use of injection molds in construction is now very popular. You can produce compounds for the production of building materials. They are durable and do not require processing with special separating lubricants in the manufacture. After all, the concrete is absolutely neutral to polyurethane. For example, liquid polyurethane compounds allow making forms to fill:

• concrete decorative Products (tiles, fences, etc.);
• gypsum elements of interior decoration (balusters, sculptines, etc.);
• liquid plastic when creating a variety of products (souvenirs, toys, figurines, etc.).

Silicone forms for confectioner and soap

The use of casting technology in forms in the food industry is quite obvious. New innovative decisions in the field of chemistry today offer liquid: plastics, silicones, silicone masses that meet all health standards and have appropriate certificates. Such safe components can be made forms for the food industry. For example, for production:

• chocolate;
• caramel;
• isomalt;
• ice;
• mastics.

Also, the compounds are in great demand for soaps. They always need new original forms, to create sold souvenirs made from soap. It is not difficult to find the customer who wishes to make their products with a unique form.

Capabilities of a small business idea

This business idea makes it easy to create in demand products with your own hands. Ready works You can sell through the online store. You can also provide services or sell ready-made compounds for other manufacturers in other industries. The most important thing is that with all these wide home-based business opportunities, the cost of components is more than affordable. The range of components is wide and allows you to select necessary materials To create forms or their fill. All that will require this sample model with which the form will be removed. Such a business idea is quite attractive for home business. It does not require much costs, allows you to produce useful products and carries out the creative process of production.