New Year's time comes - it's time for wonders when everyone can feel a little assistant to the old man in the world. After all, think if in addition to gifts for the children of the whole planet, the old grandfather had to decorate our homes, no matter how he managed. That is why we, adults, help him in every way, because it is impossible for children to stop believing in Santa Claus.

House decoration is the main task in the process of creating a New Year's mood. Buy in the store ready-made decor elements is not a difficult thing, but make the New Year decoration with your own hands - this is completely different! In this article you will find more than 20 master classes and schemes for the creation of New Year's houses. At first glance, an unprepared person may seem that the creation of a New Year's house of paper, cardboard or any other materials - the task is not impact. In fact, this is not, especially if you have a ready-made pattern. So, if you are serious, then get ready to become a real builder, because in this article you will find the schemes not only single houses, but also the whole winter villages!

Very beautiful New Year's house can be made with your own hands from an ordinary cardboard box. The inner part of the box is usually brown, which, in fact, our hand. The box will have to scroll and recall on the wrong one. Draw a house template and cut it out. Next, glue the walls and gender. The top can be left from an improvised roof and use the house as a gift box, and you can stick a full-fledged roof and put it under the Christmas tree. From above, you can draw on the cardboard with a special white marker, a white gouache or an ordinary proofreader. Externally, the house very much resembles a gingerbread delicacy, which is distributed in the Western world. Well, with you with a gingerbread house, you are familiar at the famous fairy tale Brothers Grimm "Genzel and Gretel". If your children have not yet heard her, then the time to read this story, and the homemade gingerbread house from the cardboard box will become an excellent attribute for a small draw!

More gift boxes:

On the eve of the New Year holidays, shop windows are filled with gift boxes, decorative packages, packaging paper for every taste. Smiling sellers helpfully offer rendering services for the packaging of New Year's gifts. And it seems that all this is great, because you agree, much more pleasant to get a New Year's bellish in a beautiful packaging. But on the other hand, the whole meaning of the gift is lost, the very gift that should [...]

If you have conceived to do not just a house, but a whole Christmas tree, then you will need a church in obligatory. Print our ready-made scheme, cut it out of cardboard, glue in the right places and the layout of the church is ready. Now it remains to decorate sequins and artificial snow so that the church becomes truly winter. You can download the finished scheme below.

So, the church is ready, now it remains to build houses of local residents. Download the ready-made scheme below, cut it out of cardboard, glue the house and decorate it. Who to settle in the houses? Yes, anyone! Little dolls, elves from cones or any other residents that you have. If there is a small Santa Claus, then feel free to pick it up! It turns out a whole residence!

If there are some problems with the cardboard, then you can make a New Year's house from a salt dough. It is possible to use it as a candlestick, looks very cool. So, make salt dough, roll it about 1-1.5 cm thick. Cut walls, windows and door. You can do this with special molds, and if there are no such, then use the stationery knife and ruler. Place all the walls and glue the roof. Shakes to smear the remains of the test. When the house dries off the skin of the irregularity with a shock and enjoy his creation!

Cute Danish architecture houses can be made using this scheme. By reference below you will find the schemes of all three houses that you just need to print and bend over the lines. Inside, put the electric candle, turn off the light and enjoy the city winter landscape!

If you like corn flakes or as real British eat in the mornings of oatmeal, then you will probably have cardboard boxes of the corresponding sizes. Below is a step-by-step master class for the manufacture of a New Year's house with your own hands from a cardboard box, clearly follow the instructions and everything will turn out to be!

Excellent New Year's houses are obtained from magazine clippings. Find the picture of the right house or castle, cut it out and glue around it. Put the electrical candle inside and enjoy.

Wonderful New Year's houses can be made from ordinary white paper, decoring some parts (roof and windows) sparkles. Ready templates you can download the link below. See step-by-step instructions and wake your New Year's house!

If you have accumulated a lot of greeting cards, you can make wonderful houses that can be decorated with an apartment, combining them in garlands. And you can congratulate friends and acquaintances with such postcard houses. Step-by-step instructions for making houses from old open you will find below.

Do crafts houses, you can not only from paper or cardboard. An excellent manufacturer material is felt. The process of manufacturing to madness is simple, you will find a step-by-step instruction below. It remains to get a felt and an electric candle. New Year's handicraft house ready!

With our finished scheme and step-by-step instructions you can make a whole city, especially if your team has small fidgets ready for needlework. There will be more electronic candles or you can use the New Year's garland. Add a little mini christmas trees and New Year's city ready! And most importantly, the whole family has a New Year's mood!

New Year's houses can be made of healthy materials, especially well when these materials are more unsuitable for use, such as packaging from under milk. If you look at her, the house is almost ready, it remains only to make a roof, well, and adjust the size of the house itself. If the box does not look too presentable, you can enclose it with paper and draw windows and doors, well, if everything suits, then the caretaker is ready!

From this step-by-step master of the class you will learn how to make a simple New Year's house from ordinary cardboard. The main difficulty lies in the template, and if you have no spatial vision and architectural education, draw something more difficult to draw something more difficult. Therefore, on the link below you can download the ready-made diagram of the house and decorate it yourself.

Download a ready-made house template, cut and glue. New Year's handicraft house is ready!

Download this simple template, print and cut out. In our instructions, the house is made from the old notebook. You can make from ordinary white paper or "Cherniviki". A little decor, electric candle and voila! The house from paper is ready!

If there is no time to mess with bulk houses, but I want to decorate the apartment with a whole city, then this option is specifically for you. You will need a sheet of watman (dense) format A2, printed pattern and stationery knife. On the links below you can download two different types of cities. Finished schemes are printed on A4 sheets, printed, glued together and translated directly to Watman for cutting.

We are preparing for the new year together with the children and make a house of Santa Claus from paper. Download a ready-made template, print it and glue. Young designers will be delighted!

As already noted, the crafts of the house can be made of a variety of materials, including from wooden sticks. It is quite for this work a sticks from ice cream are suitable, that's just to collect them was needed all year. In any case, you can take an idea of \u200b\u200bnotes and be sure to make next year!

Very cute New Year's house can be made of paper tubes. To do this, you will need: thin paper, scissors, glue, pencil, decor elements. Paper cut into strips of the same size. Screw the paper strip on the pencil and glue glue, get the pencil. You will need about 50 tubes to make a house as in the master class. When the base is ready, glue the roof, and then the windows and other decor items.

Incredible New Year's houses can be made from felt. Volume or flat, in the form of gingerbread houses or hours. In addition, felt houses can decorate pillows or socks for gifts. Ready patterns you will find under the photo.

Tatyana Khadyika

It is no secret that in each kindergarten is great importance to upbringing in children of proper behavior on the road and the ability to navigate in difficult situations on the roadway. In this regard, in kindergartens, a prerequisite for attracting cultural culture on the road is making layout"Our Street" and working with him.

Today I offer to your attention, dear colleagues, masterClass manufacturing multi-storey houses for layoutwhere the city street is depicted.

To work we will need:

a) empty matchboxes.

b) adhesive gun.

c) color cardboard and self-tier paper.

So, proceed.

1. glue with an adhesive pistol internal (2 pcs.) and external (2 pcs.) Parts of the matchbox.

2. Three pairs of "tops" gluits each other. Then we glue another boxes.

4. Floors can be as much as you like. Now proceed with the design of balconies with colored paper.

Here are what houses - high-rise buildings. The children were delighted! And immediately posted them on our layout.

This work is simple. It can even fulfill the guys of the preparatory group, but must, under the guidance of a teacher who works with a glue gun!

Try, and you will succeed!

It will be wrong to assume that only little girls make layouts of paper houses from paper. Of course, your princess will also be glad to such a gift, but they can come in handy in the architectural idea. Before being taken for construction, always make a reduced copy. At the same time, PVC (polyvinyl chloride) is used, from which the substainless parts cut out the milling machine. Then they are connected by a solvent.

But you can repeat the masterpieces of architects without special equipment. Such a house can be not only a useful layout, but also decoration at home. The most common material for this is paper, so the process will do not be too expensive.

We buy materials

You will need colored paper or cardboard for work. The latter is preferable for complex models, as an increased strength is required. For sweep it is better to take paper.

All windows, doors and other small pieces will cut through with a knife. Watch it to be sufficiently sharp, buy better in a construction store.

You can connect the details as super-glue - it allows you to speed up the process - both PVA (but it is better to speed up with the help of a hair dryer). In addition, scissors, pencil and ruler will be useful. For decorating you can use paints.

Select the scan

If this is your first experience in playing house layouts, it is better to take a finished scan. They can not only be found on the Internet, but also make themselves. This is a very exciting process.

You can choose almost any program. It is desirable that she worked with vector images. One of the most convenient in this plan is CorelDRAW. Building it is done very easily, you can change the thickness of the lines and load your own textures. But the built-in library also pleases the proposed photos.

The first step must be drawn the oblong rectangle. Now it needs to be divided into two pairs of the same walls located through one. On the lower edges you need to build the floor, it is attached for one of the faces to the general layout. The roof is divided into segments and also attach. After that, you can add architectural elements and visual effects. And do not forget about stripes fastening.

Stages assembly

Print and cut the previously obtained scheme.

If you do not have a color printer or you did not use textures, you can translate the blank to the cardboard.

With the help of a needle and sewn mark the windows, doors and decor elements. Cut is needed all at once, entirely. And preferably a stationery knife - scissors will leave serifs. Pre-lay the plywood sheet.

Additionally, make shutters, doors, canopies and the like. We will glue them at the very end. Using the ruler, take all the bends - it will be easier to collect.

Video on the topic

In our selection of video lessons, you will be able to find out how more complex houses are created, and many interesting ideas will handle:

09.06.2018

Templates of multi-storey houses made of paper for layout. Layout of paper houses with a scheme, cut and glue

7 890

22.12.2014

Of course, the main highlight will not be the material of the house, but its stylistics. We will make some of the houses and of them will create the ghost gaming city.

We will need:

1. White paper.
2. Pencil, ruler.
3. Scissors.
4. Glue.
5. Black feltster or black paper.
6. Print the template (PDF)
7. Look at our ideas for kids, there

The ghostly, our city will be made by the location of the windows and doorways, I explain: on the wall of the house there are two windows and the door located in such a way that the face is reminded by the face (windows, the house - mouth). The house seems to be followed by you. Moreover, the shapes of windows and doors can and should vary in shape, and the houses differ slightly with dimensions, color and shape of the roof.

In principle, templates can be found on the Internet and print. Can be made by yourself.

On a sheet of white paper, black is a rectangle, it is long, equal to the length of the perimeter of the poorer, and the height of the house is excluding the roof. If you do not want to calculate the dimensions simply, draw for a start in the middle of the album paper sheet a rectangle long 16 cm with a height of 5 centimeters. Slide it with vertical lines along the long side to four equal rectangles. Then the second left rectangle (this is the facade) draw a triangle from one free side, the side of the rectangle is the base of the triangle, and the top looks toward the opposite side (the triangle is the end side of the roof).

And on the other free side, we draw another rectangle to the second left of the rectangle. Its height will be equal to the width of the first rectangle on the left, (this is the bottom of our house). By the third, the rectangle on the left, add a rectangle with a height equal to the length of the two side of the triangle (these are the side sides of the roof), and we reinstate it from the same side as a triangle. On the latter, if you count on the left, the rectangle is drawing a triangle (the size is the same as in the previous one, the display is mirror, if it is not equilateral).

It is possible to draw a truncated triangle instead of the triangles, then the height of the side of the roof is equal to the sum of the lengths of the triangled triangle, plus the length of a smaller base. Now it remains to trim the flaps from the outside, so that the house can be folded and glued. Cut the layout.

Bending the bulk house from paper will be inside about the drawn lines so that they are not visible on the facade. Pre-draw or take windows and Deri.

The principle is understandable, make different houses, and play.

This is an instruction, how to make a house from paper with your own hands for the kids! I hope even it will take them for a while. Note: parts for these toy houses will need to be cut out of thick paper, so it will be better if an adult cuts them, not a child.

Creating a paper home with your own hands

Ideas:

Color the parts of the houses before collecting them together. You can draw the door frame around and windows. You can glue the cellophane inside the window. You can draw roof tiles. Or add windows or even two, and maybe the doors.

You can add people and animals. Create your own home. Make a church, school, hospital. Or maybe even you will make a whole village.

You can make the basis of the green color to imitate herbs. Create your own streets.

New Year's option to decorate a paper house

If you make a small town with a huge number of such houses, could you post a photo with him to the site so that I could look at him?

NOTE: My templates are not very good, but everything is fine in them. You can download and print templates. If you can print them on tight paper, it will be very cool, and if not, you will have to move the drawing from printing on tight paper.

You can also download all the templates for buildings 1 - 5 in one zip file shown by just below the house number 5. You can also download all templates for buildings 6 - 8 in one zip file shown just below at home number 8.

General instructions

After you cut out all parts, transfer all lines with a ballpoint, including the places for the loops on the doors and leave the doors open. Then glue them together. It is better to take quick-drying glue. If you make a house made of thick paper with any pattern on it, make sure that the drawing will be from the inside of the house so that it is not visible.

To keep parts together until the glue is dry, you can take a few clips, old can also come up.

1. We will start with the simplest projects and move on to the most difficult houses. Let's start with a very simple garage:

For template

2. This garage A little more, designed for two cars:

You only need 2 parts for it, floor / wall and roof. Press here For template

3. Now proceed to our first house:

Press here To get a floor / wall drawing and click here For roof

4. Next house Very similar to the previous one, but it is a bit longer:

You only need 2 parts for him.

Press here For roof.

Please note that you need a sticky tape to bond some parts together. When gluing the roof to the house, keep the roof upside down in your hand and lower the house on it to make sure it is located in the center.

5. I. second house Not much more complicated, he has a chimney passing through a hole in the roof:

You only need 3 parts for him.

Press here To get a floor / wall template and click here For roof.

If you want to download buildings from 1 to 5 one zip file, click here . Please email me if you have any problems with the download file.

6. This house is a bit more complicated - a multi-level house:

You need 4 parts for him.

And for the lower walls and two roofs click here

This house is quite complicated! See carefully where you cut parts.

7. The complexity of this house lies in the roof and "l" shaped floor.

You will need 6 pieces for him.

For floor / wall templates, click .

For roof patterns / roof for canopy / chimney click here

For canopy templates / extra roof for the back Click here

This house is not for newcomers!

8. The last house with an unusual roof, a canopy and a chimney (very similar to the one above).

You will need 6 parts for him:

For floor / wall templates Click here

For roof patterns, pipes, pointed roof Click here

For canopy and its roof patterns: Click here

Be careful with a canopy; Mark every end of the house to which it will be attached. In addition, to install a pointed roof over the main roof is uncomfortable. I propose to cut off the two glued parts of the pointed roof and re-attach them with a scotch from the reverse side.

If you want to download buildings from number 6 for 8 zip file, click here .

There are also other houses, just now issue templates, but you can look at them in the finished form and download outline:

building 9:

Template 1 \u003e\u003e

Template 2 \u003e\u003e

Template 3 \u003e\u003e

house 10:

Template 1 \u003e\u003e

Template 2 \u003e\u003e

Surely many parents are familiar with the problem: the better Take a child how to tear it from a computer or television. A good option is a walk, but if the weather is not set, he immediately disappears. A fascinating occupation is represented by your attention, which will help your spell to pass a couple of cold winter evenings. The main thing is that for this you do not need to spend a large amount of money for toys. You only need to download one file and print it. As you can see, everything is quite simple.

We offer an entertaining game - a designer that will provide you a couple of hours of rest until the baby is busy with construction. It is better Join it, because you have to deal with glue. Such a wonderful time will only bring you closer to your child. Help him build a dream house! In general, the game is designed for children from three years under the supervision of adults. However, it will be suitable for the children of younger school age. In the latter case, you can afford a couple of hours of rest. But do not hurry to deny yourself in such an entertaining pleasure.

For a child, the game will be useful, because you need to glue everything according to the instructions. Here develops thinking, imagination and motor skills. You will need paper, scissors, cardboard, glue and, of course, paints. It is better to take and, for example, PVA, and glue - a pencil. The last option is much easier to use and give you a minimum of inconvenience. We simply print the downloaded layout of our future home, gently cut it out and proceed to construction.

If you enjoy the process itself, you can make a whole miniature town, gluing a few more houses. In fact, it is an excellent option for the New Year holiday. You can, for example, place your creations under the Christmas tree and put presents there. When you finish the construction, with the help of ordinary wool you can create the illusion that snow fell in the town. You can settle there a few inhabitants there or decorate the windowsill, for example with this composition. In a word, the construction of such a paper theater will be a great time-looking for your baby and, perhaps for you. Such a scope for fantasy and imagination will give you a wonderful mood!

Paper is the easiest and most suitable material for a variety of creativity. For months from three, the child makes attention to the rustling leaves and they are engaged in them for a long time and with passion. Becoming older, children do not lose interest in paper and love to make different items from it. They are insanely rejoice when adults are mastered with them.

And if you ask Chad, what he wants to do, most often it turns out that this is a house. Moreover, create your own hands, it is the houses that love both boys and girls. Apparently, children, let and unconsciously, already perceive the house as the main attribute of life. How fast and just make a paper house?

Tools and materials for creating a paper house

When you decide to brighten a family evening or a child in school will receive a task to make such a crawl, you will need a little fantasy, paper, glue and just a few tools. Paper can be any: thin from color sets, sheets of notebooks or albums, drawing (which, by the way, gluits perfectly) or pieces of wallpaper. We will need scissors, ruler and pencil, and sometimes brushes for glue.

If there is a stationery knife, it will help quickly and carefully do the slots of the winds and the door. The glue is suitable in the most different: in tubes, PVA glue, bulk, glue-pencil, braceter of own preparation or paper in bottles, tape. From your child's scope with a child of fantasy depends the selection of objects to decorate the future house. Paints, gouache, color pencils, beads, wool, lace and other items for appliqués.

You can make a magical action at a table, on a wide windowsill or sitting on the floor. If only the surface was smooth and resistant to glue and scratches (you can put a plank or plywood).

Preparing paper house sketch

Constructing a house, small or volumetric, simple or complex, first create a sketch. Work starts with drawing. If there are only small sheets for making a house, you can cut the drawing on the dotted and perform each part separately.

Cutting the drawing, remember that the right side will remain without bending for applying glue and need to be daughter. You can add the floor to the house sketch. But is it necessary? Without him, the child is more convenient to put toys: the dishes, furniture, "residents" of various sizes, and through the door not everything can crawl.

Connection of parts, decoration and paper house assembly

Having placing the place of windows and doors, make slots (conveniently using the stationery knife) and remove paper from them. One side of the door is left not cut, and it will still be slightly ajar.

Now it is better to start decoking the product, after gluing to do it it will be more difficult. The child will gladly color the house or salas suitable colored paper. You can help him attach to the door to the tape. To do this, glue the cardboard rectangles to the edge of the door, and the jamb will supply the slot - the house will immediately look more cozy and reliable. The roof can be decorated under the tile, cutting "tile" from suitable paper.

Then cut out parts of the house and begin "construction", missing and gluing special bends.
Some time will take drying the product.
A new building lacks stability - it is better to install and glue it to a cardboard frame.

The design of the house can be complicated by adding an extension, porch, attic, second floor, balcony and other elements. Stages of work remain the same: creating a sketch - cutting parts - decor - bonding - drying.

Other options for paper houses

Very interesting, it turns out of paper round shape houses.
When creating a sketch, the housing of such a design looks like a solid long rectangle. Blooming a snaps of one column. And the roof is more often drawn separately in the form of a circle, then manifests and connects with the body with glue.

But it is possible to build a drawing in unity with the roof. Then there are many cuts for the roof, which then you can glue the flashes, creating a conical form.

With great enthusiasm, children make fabulous "log" hut.
Materials for work take the same, but the technology of building such a house is completely different. Here, first harvest building material. Of the same long paper rectangles with a pencil make tubes - "logs".

Will it be a little domishko or bulk domain depends on the size and number of rolled tubes. Usually the guys compete with adults or among themselves who rolls or smoke more.

Then the walls are neatly folded from the finished material. There are options: the walls are glued with the lumen, where there are two logs in a row, or a solid laying of four tubes with displacement of them to the edges in the next row. The roof of the house can be a "log" or smooth.

Patterns and layouts of houses

Save yourself to your computer scheme and print.

You can make a paper house in the Origami technique

The creation of origami figures, among them and houses, according to finished schemes, is the development of the logical and spatial thinking of the child, activating its mental processes. Origami can be engaged in any place, for example, in line for the doctor.

Having created my own first simple houses from paper, you can come up with a lot of others extraordinarily and more often to make them together with your favorite child.

Print, cut, Skeleton 3

Paper houses. Print, cut, spool.

Name: Paper house I.
Format: PDF.
The size: 83 mV
Focus on: Letitbit and depositfiles
Description: Print, cut down and spool.

The kit includes: Bakery, Bathroom, Living room, Living room with fireplace,
Children's, Cabinet, Cafes, Bedroom, Kitchen, Toy Shop, Meat Shop, Vegetable Shop, Flower Shop, Fish Store, Restara, Japanese Dining Room ...

All houses in one archive
http://letitbit.net/download/7729.7c4904a413acc3f41dd7a9fa56/____________.Rar.html.
Bakery
http://depositfiles.com/files/5bxf09x0g.
Bath
http://depositfiles.com/files/8lks6dpoj.
Living room with fireplace
http://depositfiles.com/files/evjdxs8sy
Living room
http://depositfiles.com/files/iox6kk45o.
Children's
http://depositfiles.com/files/u8p7LCqog.
Cabinet
http://depositfiles.com/files/s27qry56d.
Cafe
http://depositfiles.com/files/7gel2i34b.
Room
http://depositfiles.com/files/ikfmub4xe.
Kitchen
http://depositfiles.com/files/l774x5px4.
Toy store
http://depositfiles.com/files/ccfj7q49p
Butcher shop
http://depositfiles.com/files/g0szu7bpz.
Vegetable shop
http://depositfiles.com/files/txn6u7t4k.
Restarant
http://depositfiles.com/files/2bj2t2sj1
Christmas
http://depositfiles.com/files/ynqbp9uui.
Fish shop
http://depositfiles.com/files/g43srx4za.
Flower shop
http://depositfiles.com/files/4a8a04zca.
Japanese dining room
http://depositfiles.com/files/9npbqpmmr.

Paper figures for each letter of the English alphabet. Print, Cut, Skool

Name: Paper figures for each letter of the English alphabet
Format: PDF.
The size: 1.86 MB.
Focus on: Letitbit and depositfiles
The kit includes: Apple, Bus, Coffee Cup, Duck, Elephant, Fish, Glasses, House, Island, Juice, Kettle, Lion, Milk, Notebook, Ottoman, Post, Quoits, Rucksack, Star, Tote, Umbrella, Vase, Watch, Xylophone, Yacht , Zebra.

Description: Print, cut and splashes

Paper houses

Name: Paper houses
Format: PDF.
The size: 12 mV
Focus on:iFolder.ru.

Description: Print, cut down and spool.

Print, Cut and Square House Halloween

Name: House Halloween
Collective
The year of publishing: 2007-2008
Pages: 25
Language: Russian
Format: PDF.
The size: 5 MB
Focus on: IFolder, Rapidshare.

Description:Print, cut down and spool house-halloween.

Name: Paper models of cartoon characters
Format: PDF.
The size: 8 mV
Focus on: iFolder.ru.

Description: Everything is very simple - print, cut down and spool!

Gingerbread house. Paper model

Gingerbread house . Paper model

Developer: Canon
Format: PDF.
Language: English

Despite the fact that most computer programs that are performed in 3D modeling make it possible to realistically present the appearance of your future home, macating of houses from paper is still relevant. After all, not all of these programs own. And order an experienced engineer or designer such a computer model is expensive. In this case, we assign uncomplicated methods of modeling houses from paper and cardboard far faster.

And if you have children from 2 to 10 years, then this work may turn into a fascinating lesson. Moreover, the training and developing effect of this type of activity is hardening hard. Here and accuracy, and motility, and skills to work with instruments and, of course, the development of spatial thinking.

Simple layouts of paper houses and scan for gluing

Make a layout of the house with your own hands is not difficult. The most simple layouts of paper houses are easiest to do from the so-called. Scan, when all of their elements are interconnected by the bending lines and represent a one-piece element as a scheme.

Also, the scan, except for the walls, floor and roof, has additional bending for gluing. On the Internet you can find links to such sweeps. They are enough to print on the printer or, measuring the aspect ratio, draw on sheets of paper or cardboard and get a scanning circuit for modeling.

You can transfer the resulting scan to the colored paper.

On it, with a needle or sewn, you can transfer key points of various elements: windows, doors, places for attaching additional architectural elements and so on. It is necessary to cut them immediately with the help of a stationery knife by placing a piece of tight cardboard or plywood under a sheet.

Separately, the overhead elements are made: windows frames, shutters, doors. T.P., Which you take on a ready-made layout last.

A smooth bend on the lines is easiest to perform by attaching a ruler with a sharp edge. Repeating this procedure in all areas of bend, you will receive a finished scan for gluing.

You can still make a scan, making each design element separately, and connecting them among themselves on the collar fields from the inside scotch. This method is especially interesting when you make a model of a house of thick and solid cardboard.

It is possible to glue the layout using the rapidly grappling adhesives of the type PVA, the stationery silicate, adhesive pencil. It is also possible to produce it with the help of bilateral scotch sold in construction stores.

And we offer video to help:

Making a scan for layout at home with your own hands

The process of self-making sweep is no less fascinated than working with their finished samples. To do this, you will need a practically any program to work with graphic images. CorelDraw or similar to it, processing vector images suitable. In it, with an increase in or reducing the size of the image in the same ratio, lines thickness are changed, and loaded textures. This allows you to get more realistic images. And the library of the texture built into its shell itself is impressive. At the same time, fill in the texture of the scan element, you can get the finished appearance of the main elements of the layout.

The whole process, including the fill of the parts of the scan of the selected texture, applying visual effects and architectural elements, as well as inserting images from the symbol library, takes from 10 minutes to half an hour if the house is not very complex. Print the scan on the color printer and proceed to maquetting.

For sample you can use this, made by us by copying the image to the computer and increasing it to the desired size.

Production of complex paper layouts

The process of manufacturing complex multicomponent layouts of houses is not much different from the above described above. Simply such sweeps are performed for individual elements of compound layouts. On the group photo of the assembly of such a layout is shown its individual elements and the order of assembly.

Having mastered the simple metalwork technique from the paper of simple houses, you can create entire paper towns with elements of landscape design, plants, car models and small architectural forms.

MAKETS OF BUILD BUILD BUILDS MAKE MUST MUST MUST MUST MUST MUST MEETING TO COLLECTION TO CALCULATION The formula for determining the circumference length (2πr), adding a strip for gluing.

You can also add realistic to your layout, making a simple backlight of the house from the inside.

To do this, you can make the markup of the locations of the LED and the battery, and then install them during the gluing layout.

Such a house can also serve a night lamp, but in this case it is better to use a pulse power supply included in the power grid.

Suitable charger for a mobile phone. You can also use an inexpensive Christmas garland:

Simple layouts of houses without sweep

This is, first of all, houses collected by their own hands from paper cylinders. The same layouts are greatly suitable for various small architectural forms on national layouts with landscape.

But also using such equipment, you can create a realistic model, imitating so cute heart of any Russian log house.

To do this, it is necessary for the manufacture of tubes to take a piece of paper with a larger, so that after folding its turns, the annual rings of wood spis are reminded.

And the adjoining of the crowns can be simulated by taking the ends of the tubes with a solid round item of a suitable diameter.

Collect paper logboards from such elements simply. And the intermediate crowns on the facades are output, and for the sample you can take a photo of any real log cab.

Coatings of roofs of house layouts are better made separately, in the form of paper slate sheets, tiled scales or hundred bitumen tiles.

Dear readers, if you have any questions, ask them using the form below. We will be happy to communicate with you;)