Window Rehau 5 chamber. Comparison of the profiles of the REHAU brand (Reheau). What is the profile to choose: single-chamber or three-chamber

5-chamber system from the assembly depth of a profile of 70 mm and 2 contours of the seal

System window profiles Delight-Design is a new development of Rehau, which has embodied the most modern tendencies in architecture and design. The fact is that this profile system gives its owners:

More light. Thanks to know-how technical solution The profile system of Delight-Design is characterized by a reduced height of the frame and sash, due to which the room falls on 10% more solar light compared to traditional systems. According to the testimony of biochemical laboratory experiments, bright sunlight It is impossible to better contribute to the formation of serotonin - "hormone of happiness", which is responsible for susceptibility to stress and emotional stability. And sunlight into our homes falls through windows. This means that with windows from the profile DELIGHT-DESIGN system you will receive not only more light, but also more good mood and well-being!

More heat. The increase in the area of \u200b\u200btranslucent filling of the Delight-Design window design is in no way affecting it. heat engineering characteristics: 70 mm depth, five-chain structure and glass installation capacity thick up to 41 mm - all these factors will reliably retain heat where it really should be, namely inside the house!

More choice. Two options for executing Delight-Design sash allow to maximize the extent to satisfy the needs of the customer both on the object and private markets. You can choose either basic or curly option. Basic sash has a classic appearance, so suitable for any modern interior. Figured - will become a real find for those who appreciate an exclusive design. Its indisputable advantages are noble proportions and roundness of forms. More opportunities for improvisation gives the elegant relief of the decorative stapper.

We have already written about the profiles of the brand Rumau. We dedicated this article comparative characteristic Window profiles Rehau.

This profile is from a series of low-budget, but it does not prevent him from possessing good thermal and functional parameters. The Blitz profile is smooth and smooth, the top of the frame and the curved folds of the sash, which prevents the accumulation of dirt and moisture.

Main characteristics:

• system depth - 60 mm.
• the number of cameras - 3 cameras.
• heat insulation - Ropr \u003d 0.63m2 ° C / W.

REHAU EURO-DESIGN

Profile is a low-budget, but in comparison with Rehau Blitz has better thermal insulation. The profile has its own excellent indicators for reliability, durability, sound insulation and thermal insulation.

Main characteristics:

• system depth - 60 mm.
• the number of cameras - 3 cameras.
• heat insulation - Ropp. \u003d 0.64m2 ° C / W.
• reinforced shut-off devices For high crackling
• two independent seals contour providing water and airtight
• large selection of decorative films for decorating under various breeds tree

REHAU SIB-DESIGN

REHAU SIB-Design is designed specifically for the Russian market. The most important advantages are comfort and thermal insulation. Additional camera Between the inner and reinforcing wall of the profile preserves heat. It is possible to install a thicker glass thickness up to 41 mm thick.

Main characteristics:

• system depth - 70 mm.
• the number of cameras - 3 cameras.
• heat insulation - Ropr \u003d 0.71 m2 ° C / W.
• stressed locking devices for high crackle
• two independent seals contour providing water and airtight

REHAU BRILLANT-DESIGN

The Brillant-Design profile refers to the premium segment and has increased heat and sound insulation.

Main characteristics:

• system depth - 70 (80) mm.
• the number of cameras - 5 (6) cameras.
• the thickness of the glass - up to 41 mm.
• thermal insulation - Ropr \u003d 0.79 m2 ° C / W.
• stressed locking devices for high crackle
• two independent seals contour providing water and airtight
• you can choose roundings, squeezes on the boxes and

Rehau Geneo.

Unique energy saving system The new generation using fiber composite materials provides very high thermal insulation. Thanks to the RAU-FIPRO material, replacing steel reinforcing elements, the weight of the window is significantly less.

Main characteristics:

• system depth - 86 mm.
• the number of cameras - 6 cameras.
• window thickness - up to 44 mm.
• thermal insulation - Ropr \u003d 1.05 m2 ° C / W.
• soundproofing - 47 dB (a), with glazing 50 dB (a)
• hacking - above 2 classes.
• energy cost savings up to 76%.
• stressed locking devices for high crackle
• two independent seals contour providing water and airtight
• convection limiter
• smart Comfort

Comparative table characteristics

Plastic window Rehau. (Reheau) Developed specifically for our country, with its temperature drops. Double-glazed windows of this brand have good noise insulation, ventilation, protection against hacking, stylish designAnd, of course, reasonable prices.

Premium German brand in the Russian market since 1995. With us you get present German quality from the company with a 48-year history worldwide.

• All top-class profile systems "A"
• All are filled with frost-resistant and marked with the letter "M"
• All have the maximum 4-sided steel reinforcement
• Unified quality standard, regardless of the country of production

The bigger aircasesThe smaller the air exchange and, accordingly, above thermal insulation.

The wider profile and more mounting depth, the higher the heat insulation.

Profiles only of the highest class "A"

According to the thickness inland walls All our profiles are the highest class "A" - the thickness of their face wall is at least 3 mm.

• class "A": Face wall at least 3.0 mm
• class "B": front wall of at least 2.5 mm
• class "C": wall thickness is not normalized

Note that 80-90% russian market These are the classes of "B" and "C" and only 10-20% of the class "A" profiles. At the same time, in our assortment, the profiles of only class "A".

We fundamentally use the profile systems of classes "B" and "C" (with a width of the front wall less than 3.0 mm).

Only frost-resistant profiles

According to GOST 30673-99 "PVC profiles for window and door blocks" for climatic resistance, all our profiles are "frost-resistant" - for areas with an average monthly air temperature in January below minus 20 ° C.

GOST standards for different classes:

• normal execution "H": average temperature in January - minus 20 ° C and above
• frost-resistant execution "M": The average temperature in January is lower than minus 20 ° C

In our assortment only frost-resistant specialized systems marked with the letter "M".

The heat transfer resistance (thermal heat resistance) is the main thermal insulation coefficient. It is determined by the ratio of the temperature difference outside and indoors to the heat flux passing through the window. The higher this number, the better the effectiveness of thermal insulation.

Evolutionary windows SmartGlass 2.0

Our multifunction glass windows work on you and in winter, and in summer. In winter, the spraying of silver particles retains up to 90% of thermal energy heating devices, and in summer, the double-glazed glass reflects 25% more solar heat than ordinary plastic windows.

• 42% more heat in winter (energy-saving properties)
• 25% less heat in summer (sunscreens)

All our double-glazed windows contain special energy-efficient glass. We do not use conventional glasses even in the most basic equipment.

Climate Management Systems AIRDRIVE I, II and III

The windows are built into the optimal mechanisms of ventilation - the sash are opened by 1-5 mm depending on the selected mode. These are not external devices (comb or valves), namely embedded accessories.

Three options:

• AIRDRIVE I: Slotted ventilation (1 mode)
• AIRDRIVE II: Discrete multistage ventilation (3 modes)
• AIRDRIVE III: Discrete multistage ventilation (5 modes)

We try not to put the ridges because of their appearance (only at your request). Valves in principle do not use due to the fact that they violate the integrity of the window, reduce its tightness and strength (since profile and reinforcement is drilled).

Rehau concern Releases profile systems for windows of various price categories:

• Blitz, Grazio, Estet - budget;
• Intelio, Delight - Luxury class;
• BRILLANT, GENEO - exclusive.

Biscuit profiles "Blitz", "Estet", "Grazio" of the German brand are not at all inferior as an exclusive "Geneo" and "Brillant". Products of different series are distinguished primarily by the operational properties and spectrum of solved tasks.

Specifications

• Grazio. - budget series with elegant design and high thermal insulation. Due to the minimum width of plastic 104 mm, the profile passes the maximum of light. Suitable for glazing in areas with a harsh climate.
• Estet. - 3-chamber profile with unique flaps, which were first mounted only on premium windows. A system with increased hacking and heat, sound insulation.
• Blitz. - Budget profile for reliable glazing without frills. Delivery kit is a profile frame with a glossy surface, a single-chamber glass, basic fittings and a rubber seal.
• Intelio. - The legendary "quiet" 6-chamber windows from Rehau, blocking cold and sound from the street and transmitting the maximum of light. Provide installation of double-glazed windows with a thickness of up to 52 mm. For tightness, equipped with a 2-contour seal and convection limiters.
• Delight - energy-saving profile with 5 chambers reinforced by reinforcement. Decorated with elegant stroke.
• Brillant. - Warm five-chamber profile with increased hacking. Easy, durable, suitable creation window Systems Any sizes.
• Geneo. - Maximum reliable reinforced profile made using innovative RAU-FIPRO ® material. Easier analogs by 40%.

Design

The characteristic feature of all REHAU systems is an ideal smooth surface. It can be matte or glossy. Somewhat angular - in the Blitz series, with soft lines - at Brillant, mirror - from Geneo. Delight profile is recognizable by rounded frame corners. Filling any model is not limited in design - can be stained glass, tinted, color, with lamination under wood, metal. Plastic is painted in white or any other tone, including "under the tree".

Select profile

"Blitz" - an inexpensive solution for glazing office, commercial, industrial and residential facilities. Designed for use in a soft climate. This is a concise good profile that harmoniously fits into the exterior of multi-storey houses.

"Brillant" is an exclusive system, which is the most restrained heat, reliably protecting the opening from hacking. Keeps functionality in any climatic conditions.

"Delete" is a profile luxury system for aesthetes. Her frame can be treated individually, under a specific interior.

"Geneo" is a solution for discerning homeowners. Plastic of this series is unprecedentedly lightweight thanks to an innovative material and can be installed on the refusal of the base.

5-chamber system from the assembly depth of a profile of 70 mm and 2 contours of the seal

The REHAU BRILLANT-DESIGN windows are designed for frequent use and are included in the category of premium systems. Gorgeous aesthetic I. specifications Profile data will allow to satisfy the highest requirements. Most often they apply during the construction of cottages and urban apartments in high-rise buildings.

The Window System Rehau Brillant-Design acts as symbiosis of innovative ideas, exclusive design solutions and use comfort. Such windows will be introduced in any home perfect comfort and warmly, will bring beauty home interior to the highest level.

The profile of this window Rehau combines all varieties modern design and outstanding thermal insulation. To achieve such indicators of preservation, the heat allowed the seal on the raids. The laconic, elegant and very beautiful appearance of a smooth shiny surface, beeps and a rounded stapper is complemented by a large range of offered color solutions Profile.