Machine woodworking multifunctional household with flights. What is the reysmus and what is it needed for what

If you faced the question of what the reysmus is, you should know that the equipment is a woodworking machine. It is a kind of planing equipment and is intended for shifting products to the size of thickness. Details are processed that are shifted pre-on the fugoval machine.

Description

Quite often, novice masters do not know what reysmus is. If you also turned out to be among them, then must understand: the device described is the equipment with cutting tool in the form of a knife shaft. The billet is fed by horizontal tablewhich is a worker in the machine.

To date, one-sided and double-sided machines are known. The first possesses one knife shaft, which is designed to remove the material from the top. Bilateral devices have an additional knife shaft located on the desktop. The element is based on the surface, and if fixation is needed, it is carried out by a plank and side rollers. Holding is provided by rollers who contribute to the feed. The latter can also be manual. Bilateral flighting machine is similar to constructive features with fugoval equipment, so such aggregates are often combined, which allows you to obtain fugovine-flight devices.

Purpose

If you are also interested in what is a flight, we will remind that this is a massive or portable device that provides a calibration of blanks in thickness. The unit is intended for finishing planing under a certain thickness. The boards are skipped through the flight, the upper palate of the tree at the same time is planered with a wide shaft with blades.

The flights are in demand in the joinery, since with the help of them you can calibrate the products under the joke flush. The smooth surface is obtained by connecting the details of the same thickness. Quite often in consumers who represent for themselves, what is a reysmus, there is an erroneous opinion about this devicewhich is expressed in the fact that the unit does from curves of blanks straight. The main purpose of the machine is to provide desired size. Therefore, the details initially should be even at least one of the parties.

Constructive features

The reysmus is based on powerful engine. It is responsible for rotating the shaft with knives with the help of belt transmission. The upper part of the device is movable, it walks along the vertical guide. Inch configuration mechanism and millimeter scales are used to set a certain thickness.

Usually wood flights have automatic product supply. The rollers move the workpiece at a certain speed in front of the knife shaft and behind it. In one minute, you can process about 8 m material. From the user only to put the workpiece onto the working surface and submit it inside, and after receiving from the reverse side. This function is useful, as it saves strength.

Some household flights have two automatic feed rates - high and low. The first provides fast work work, while the second allows you to achieve maximum surface quality.

Specifications

The main characteristics of the flights are:

• the size of the workpiece;
• power.

The latter usually reaches 1800 W. Maximum thickness and width of planing is a flight caliber. These characteristics describe the permissible size of the workpiece. The limiting width of the planing usually reaches 330 mm, while the thickness is 152 mm. In the first parameter, it can be seen how wide the board you can process if you install it on the edge. These numbers do not say that the flight is intended for planing massive and long boards. Their device simply will not be able to drag. The optimal caliber is relatively small billets.

Raysmus is a machine that is characterized by a certain depth of planing. This feature shows which layer of wood can be removed at a time. The described equipment, the maximum depth reaches 3.2 mm. Wide boards It should not be planed with limit depth. With an increase in the size of the products, the depth of planing is reduced in one pass. The frequency of rotation of the knife shaft from the flight reaches 10,000 revolutions per minute. The higher the speed, the more qualitative the planed surface is obtained.

The need to use chipotto

Woodworking flights during operation are thrown into a large volume. It is better to remove it with the help of a building vacuum cleaner. If this is not done, the waste will be clogged in the equipment. They penetrate the moving mechanisms and fall into the planing area. All this reduces the processing quality.

As a result, the master fails to get a smooth surface of the workpiece. In confirmation of the need to use the device for removing sawn waste, it can be noted that the cleanliness in the workplace is also important.

What is the Metabo DH 330 Machine

To fully understand what the reysmus is, you can consider such equipment on the example of a particular model. Metabo DH 330 costs 37,400 rubles. and is a portable convenient machine intended for planing bars of a certain height and width. The cast bed provides a reliable installation of the product on the table and high accuracy Performing operations.

Dangerous parts of the unit are reliably hidden in the housing. If you need a flight, the woodworking machine from Metabo you can consider to purchase. Its power consumed reaches 1800 W. The maximum processing width and the depth of planing are 330 mm and 3 mm, respectively. Knives have the following dimensions: 332 x 12 x 1.5 mm. The part in the machine is moving at a speed of 7 m per minute.

Equipment uses belt transmission. Weighs model 35 kg. dimensions Installations are equal to 579 x 857 x 574 mm. You can also be interested in the diameter of the planing shaft, it is 47 mm. Its rotation is carried out at a speed of 9,800 revolutions per minute. When choosing a flight, consumers often pay attention to the diameter of the aspiration opening. This parameter is equivalent to 102 mm.

Positive features of the machine

In order to decide which model of the flight to choose, you should consider it positive features, among others, Metabo DH 330 should be allocated:

• accurate adjustment;
• chip thickness selection;
• the ability to install on the table.

As for the possibility of adjustment, it is provided with regard to planing thickness and is carried out by turning the handle. Looking at the scale, you can see the graduation of the necessary height. The design provides for the presence of a panel, with which you can choose the thickness of the chip removable, which reaches 3 mm. The machine is also good because it is possible to make it install on the table. It provides convenience.

Cost knives

In addition to the equipment you may need knives for flights. Their price is 4100 rubles. This is bilateral cutting elements for planing. Suitable for wood of all breeds. The basis is a purified solid alloy with cobalt content in the amount of 18%. Consumables can be releasing, which guarantees long term operation. Made knives from high-speed steel grade HSS. Their thickness, width and length are equal to 1.5 x 332 x 12 mm, respectively. Packaging two cutting elements.

Finally

The flight is relevant during large-scale construction, because with the help of it you can handle a huge number of boards of different widths. Modern machines change the knife is quite simple, this suggests that you can make a chips of the desired size. Additionally, this contributes to the presence of a cutting depth function, but usually the cost increases due to this option.

You can pre-process the wood on the fugoval machine. If you plan to use plastic, thermal insulation or polymers in your work, then you should take care of the presence of a flight, which is equipped with feed rollers with a layer of rubber on top.

Ensure the standardization of boards in thickness helps a raysmovy machine. It is hard to imagine the construction of the house, bath or utility rooms. Due to this equipment, it is possible to obtain not only the cut-made board, but also to provide it with a smooth outdoor surface. In the future, such blanks can be used not only for laying floor, but also as components of furniture or in the form of elements of the room finishing.

Specific wood processing

It is important to consider that the flight machine is unlike the turning, milling or drilling equipment is less demanded from a wide range of users. Such expensive models can also occupy a significant amount of space. In this case, it is worth competently assess the estimated need for this product so that it does not stand most of the time in the dusty corner of the garage or workshop.

The flight machine is one of the important installations in carpentry, construction, woodworking and furniture industry.

The main task that is assigned to this woodworking multifunctional apparatus is to give the workpiece with one processed side of the specified size. In fact, the apparatus refers to a greater extent to the household area of \u200b\u200boperation, but to serial or small-sector production. As a result, after the finishes, the wood will go out in a single amount as curvilinear and straightforward.

Operations in most cases are carried out automatically with minimal involvement of a specialist. Although the plants on the tree are relevant for factory workshops, but meet in domestic workshops.

Important rules must be followed:

• For processing on budget models, an excessively thin blank is not allowed. Otherwise there is a vibration providing negative influence on the quality of the treated surface.
• The minimum allowable length for the workpiece is the value that is determined by the distance amount from the front to the rear feed shaft plus 10 cm.
• When cutting short blanks, they need to be securely fixed on working surface.
• To handle wedge blanks, you need to use the appropriate device.

The height of the passage removed over the passage varies within 1-3 mm, and depends on the width of the material. Optimal processing width for household conditions is 30-300 mm. For a domestic workshop, there is enough fugoval flight by 1.8-1.9 kW.

A high power (from 2 kW and above) will be in demand only for frequent processing of solid wood, to which beech, pear, ash, elm, etc.

Video: how to use the electrolaw

Construction features

The overwhelming majority of models are identical in its essence design with different performance. A narrow specialty paysmus machine on a tree is not relevant to everyday life, and it can be successfully replaced by a universal copy with the following configuration:

• 1500 W electric motor motor operating from the household network 220 V;
• shaft with grooves in which knives are fixed;
• drum feed system;
• welded rigid bed;
• countertop with extends;
• block for start and stop;
• adjustment knot with lymbami and rules.

What makes the announcement - mandatory structural elements

Choose a fugobian flight machine stands in different parameters, including external dimensions. In a small workshop, handling massive equipment will be inconvenient and unsafe.

It is preferable to stop your choice on the flight machine with smooth adjustments, which will be more accurately type. When buying in the online store or construction supermarket it is worth clarifying the availability of an automatic feed option. It contributes to substantial simplification when using this equipment. Also increases the processing rate of blanks. Most of the latest generation models have machine tools even in budget value.

It is worth paying attention to the devices with the cutting function of large allowances. This will expand the possibilities of operating the flight.

Video: How to choose a flight and equipment for working with equipment

Varieties of woodworking machine park

Manufacturers seek to increase productivity of their product. The main emphasis is placed on the simultaneous processing of several surfaces. Based on this, the following types of execution are found on shop windows:

Unilateral. Create a chip in the processing process only on one side of the workpiece.

Bilateral. Such a fall on the tree is designed to cut chips in parallel from both sides - on top and bottom.

Multilateral. This type is extremely rare and is not used in everyday life due to the complexity of setting, operation and maintenance. Realship in the simultaneous planing of blanks from three, four sides is minimal.

Most often in the domestic workshop there is a one-way flight, equipped with one drum with knives. The advantages are held in the following qualities:

• simplicity settings and maintenance;
• small dimensions with sufficient performance;
• reduced electricity consumption in comparison with machining machines more side At the same time.

Competent choice

Conditionally, for comparison, it is possible to divide the timing machines on a tree into several groups based on performance characteristics. Each party will meet the requirements of the owners:

1. You can perform a small amount of work for a country house or cottage using budget or universal models. Such a combined multifunctional apparatus during some twigs can easily turn from the plane to the plane, circular saw, milling equipment. These include Stark CWM-2500 or Belmash Mogilev 2.4. However, for industrial use This type is not relevant.

1. If during construction it is required to treat a significant amount of blanks, then the JET JWP-12 model is worthy of attention, Corvette 21.22, RP-1200 caliber. Such models at the construction site will quickly meet the relatively low price.

1. Warm brigades recommended semi-professional equipment with high performance. It is relevant for low-rise construction Or for carpentry workshops. Positive reviews There are NB, Metabo DH 330, Dewalt DW 733, etc. available at Makita 2012.

1. Furniture plants are interested in professional equipment capable of processing rapidly large parties. Analogues in such a situation are Jet JWP-201 HH.

1. Industrial sawmills or logging plants require narrow-profile machines such as SCM Logic 23, MV 1013A.

Current selection parameters

Choosing for your own needs household Machine, it is necessary to pay attention to his operating parameters. In some situations, it is important to buy a flight with a "safety margin", but often it leads to excess waste of financial and energy, which may not be useful in the future.

You need to pay attention to such values:

• Dimensions. What they are more, the greater the workpiece will be able to skip through the working area.
• Cutting depth. At once, the knives will be able to remove only limited height, but the more slice - the power is required by the electric motor.
• Motor power. A too weak engine forces for several approaches to achieve the required height.
• The speed of rotation of the working shaft. The faster the rotation, the cleaner and even more than the surface of the workpiece and the faster you can stretch the bar.
• Noise level - in some cases it is of fundamental importance. The lowest threshold shows Makita production technique.

When buying it is necessary to take care of the purchase of a spare set of knives.

Rating of the best models of flight machines

With all the diversity of choice in the domestic market there are clear leaders in quality, power, compactness and assembly accuracy. We give the top best in the opinions of users of the aggregates.

STARK CWM-2500

The combined machine is designed to handle wood to give it the necessary forms and sizes.

Main functions:

• rectilinear planing (fogging) on \u200b\u200bthe plane or edges;
• planing (fugmentation) at an angle (by edges);
• planing (fogging) on \u200b\u200ba plane with a presser device;
• sawing along and across the fibers entirely or on a certain adjustable depth;
• sawing along the fibers at an angle by means of a guide axis;
• sawing across the fibers at an angle;
• crossing and milling by end milling mills.

The device includes:

• asynchronous 2.5 kW motor with built-in overheating protection;
• protective casing;
• connector for switching on the vacuum cleaner and assembling chips / dust from the working surface;
• the electronic unit of the UDO to start the equipment under reduced voltage (up to 160 V inclusive).

Taking into account the fact that it is relatively new equipment, many reviews are mainly positive character And the problems associated with the prescription is not yet revealed. In general, the quality of the assembly is noted by the plus, the work of the Fugank and the flight also. Problems Causes Installation and Adjustment sawing table. Price - 36200 rub.

• Stark CWM-2500 User Manual
  

JET JWP-12

Compact multifunctional flights are equipped with a collector engine, which provides low weight (30 kg) with quite high power - 1.8 kW. Convenient design allows you to transport it and install on the tables, in small workshops and open sites. Power is enough to work with blanks up to 32 cm wide, thickness up to 15.3 cm. Due to the design of the knife shaft and an increased number of revolutions, the result of the flight operation will be similar to the processing on stationary equipment.

Equipment price 24500 rub.

• Jet JWP-12 Operating Instructions
  

Makita 2012 NB Flash Machine

The planer Makita 2012 NB is the most compact of the listed models and weighs only 28.2 kg with a capacity of 1.65 kW, which allows you to make the outbreak depth up to 100 mm. The kit includes 2 knives, the blades on which are replaced very quickly. The feed rate is 14 cm per second. Among the analogs it highlights a low noise level, which is especially important for homemade workshops.

Among the advantages:

• a convenient mechanism for feeding the workpiece, which allows to achieve perfectly accurate sizes in the entire party;
• the readiness of the machine shows the indicator;
• the system for adjusting the depth of cut in the range is 0.3-10 cm;
• connector for switching on the vacuum cleaner and assembling chips / dust from the working surface.

Cost Rank 37000 rub.

Video: The world's best desktop reissue Dewalt DW735

When processing wood, the master often needs to be strict. It is necessary to do if the material of one thickness is needed, certain sizes Board or shield, smooth surface of the workpiece.

Reysmus will help solve the problem. This is a machine with the knife shafts made of high-speed steel. Automatic billet feed guarantees comfort and high performance performance. Such a device crafts is often made independently. But it must be remembered that the main problem homemade reysmaus - Vibration, which prevents the high quality when planing thin parts. Professionals choose another option - purchase.

Where the flight is applied

No woodworking enterprise is not required without flight machines. Each joiner or carpenter necessarily has it in his arsenal. In the furniture industry, such a machine is used for the manufacture of smooth planks, plating rivers.

Only such an apparatus allows you to get the board of the same thickness both throughout the entire length and in width. It is designed for plane processing. Planing of bars, boards, shields according to the specified thickness parameters.

There are two types of flight machines: with one-sided processing of material and parallel (bilateral).

The length of the board or bar must be 100 mm to exceed the distance between the rear and feed roll. If the dimensions are less, it is necessary to securely fix the material on the basis.

Benefits of flights

Industrial raysmissee allow processing large volumes Board different sizes (from narrow to the widest).

Household models are easier, smaller in size. This facilitates their transportation and installation.

Modern designs allow you to control the cutting depth and accurately set the chip thickness.

Another advantage is a simplified scheme of replacement of work knives.

The presence of sectional feed shafts allows simultaneously billet for different thickness.

There are raminine machines for work and with other materials. For planing, plastic and polymer blanks have developed apparatuses with rubberized feed rollers. This design allows you to damage the surface of the workpiece.

Special adaptations help to handle on such machines even blanks in the form of a wedge and achieve parallelity of the planes.

Choose a flight right

The main characteristics are power, the depth of the cut and the width of the workpiece.

Performance is determined by the engine power. The flight machine, the capacity of which more than 1.8 kW is quite suitable for handling hardwood wood: ash, pears, spruce, beech, elm. Optimal flight power for private workshop. 1.9 kW.

The depth was cut from 1 to 3 mm, it depends on the width of the material and characterizes the slice in one pass.

The optimal indicator on the width of the workpiece is from 30 to 330 mm. Having an apparatus with such characteristics can be treated in a small workshop almost any wooden billet.

Raysum Machines are often used in the construction sector to handle parts from wood different breeds. Machines are designed to impart the workpieces of the desired size and form. With their help, they receive boards or a bar of a certain thickness and width.

The design features of the machine device allow you to handle parts or receive finished goods with the required parameters with millimeter accuracy. With the help of a flight, you can strict the workpiece in the same plane, adjusting the thickness of the board. The processed billet is sent through a special mechanism that simplifies the operation of the machine.

The design of the reysmaus consists of an engine with a knife shaft attached to it, there is also an adjacent working surface and special rollers.

Reysmusovy machines are used for processing wooden elements and manufacturing products in an industrial scale. Some varieties of such equipment can be used in domestic purposes.

Different machines have defined constructive features Different with the power of functioning equipment and the specifics of the work performed. The maximum speed of gross rotation may also differ from different models Raysmisov. Dimensions of the machine, the depth of the produced with it, propyl, the incision width is also different from the machines of different types and sized depending on their functionality.

The equivalent of the value of the machines of one or another type of machine tools is also different: more powerful models that have the widest range of solved tasks and methods of processing parts, like more overall machines, are much more expensive than small cheaper budget mechanisms for wood processing.

Functioning

Usually, the processing of materials using a flight involves the planing of wooden blanks and parts that have a length of a slightly larger size than the length of the distance set between the rollers.

Raysmus works using flat plane methodSubjected to material processing. At the same time, the treatment of wooden blanks is carried out due to the work of such elements:

1. Knife shaft. The cutting shaft included in the framework of the reysmaus carries out the basic function when processing the workpiece.
2. Rollers. Feeding parts to the surface of the desktop is performed under the action of installed rollers.

On the working surface, the part is fixed using a special mechanism, which ensures the most accurate processing. After that, the item is planed with the help of knife blades that affect it.

So happens calibration of the desired details, allowing them to be absolutely identical in size, give them the same form. If the flight has an automatic feed mechanism, then the speed required to stretch the parts can be configured.

When used during the processing of special overhead items, using such a machine can be planed with materials that have the opposite image of a non-parallel species. In this case, it is necessary to install the details by setting them a certain angle of inclination.

Performing work on the processing of parts using such equipment provides the ability receive the highest quality . In addition, processing sawn timber on the flight unit, you can perform work in the most accurately, regardless of the total number of parts used.

The flights are very economical in relation to its maintenance technician, which is different. high levels Performance.

The used mechanism of operation allows the processing of sawn timber width to one meter and a little more. At the same time, the greatest depth of the propyl produced is usually 145-155 mm and even more depending on the model used.

Types of equipment

There are various flights:

By type of design, flights can be classified on such devices:

1. Mobile. They have low weight and size. Such compact devices can be used to planing small blanks.
2. Stationary devices. They are distinguished by impressive sizes and a lot of weight. Large flights are used to handle large parts.

In independence from the components and functional purposes, all machines are equipped with a special device providing automatic billet feed. It consists of a roller system, with which lumber is pressed against a special shaft. Rollers are gradually promoting the workpiece until it reaches the operating surface of the reysmaus.

Power used equipment fluctuates ranging from 1.6 to 8 kW. When planing width can reach 39 cm, and the depth is approximately 3 mm.

Machines differ in the rates of rotation of the shaft, the number of knives in its composition, the amount of energy consumed and other essential features that must be taken into account when purchasing a flight equipment.

Types of flight machines

For different methods Processing flights are divided into several types.

From the usual fugification, the operation of the reysmaus is characterized in that, as a result of using such a woodworking device, it is possible to process the workpiece of the desired size and in any quantities. The texture of the timber used will be obtained by the most smooth, without any damage to surfaces.

Planer equipment

Pleasmises of this type are used in the manufacture wooden products and sawn timber requiring the greatest accuracy devoid of the slightest external damage and defects.

Planing-flight machines are able to provide the creation of the most flat surface of the blanks. Reducing the thickness with this processing occurs when using a longitudinal method of planing. Thus, details are attached fit form and required dimensions.

Processing sawn timber planing machine can also be eliminate possible defects Wooden blanks (knots, zadorinka, a variety of irregularities and so on). Return-translational movements during the operation of the machine are made due to the rotation of the knife shaft or the movement of the processed part, tightly held using rollers.

Separate-flight machines are produced both domestic and imported firms. Thanks to a wide range of products, it is possible to choose a model of such a machine for use for various purposes: in everyday life, as an equipment for a home workshop. You can purchase more powerful aggregates to equip the wood processing workshop and use them in production.

Raysmissee for home goals

Machines used for household purposes are distinguished by the following characteristics:

Used in household needs, equipped with manual detail feed system. They are not used for the most profound rubber surface of the product. Since such machines require certain physical costs, they are not used to perform labor costs or when working with large quantity Lumber.

Production devices

Raysmisi used for industrial purposes requires a special place organization for their installation. The supply of lumber in them is automatically. They function at the expense of the network.

Industrial flights have a big powerTherefore, for proper and long-term work, they are retrofitted by the desired built-in cooling system.

They are characterized by the presence of the following functions:

• maximum power;
• high speed planing;
• opportunities to produce deep feeding parts and blanks.

Knives in such machines can be located on both sides or be on top. And also the machine has a rotating drum and a double rack in its design.

Production flights are equipped with a special device, which controls its operation, due to which it is possible to install the required depth of propyl.

Criterias of choice

Today, the market for such machines is filled with equipment of various types. You can purchase planing and flights or fugoval-flight machines as russian productionAnd manufactured in Japan or China.

And the models produced in some are widely represented european countries. Planning the purchase of a flight for various purposes, be sure to pay attention to such factors:

1. The quality of its manufacture and functional features Machine.
2. The goal, in accordance with which the machine is bought. If you need to handle parts for the house, you do not need to purchase expensive models. It is quite possible to use compact budget options.

In production construction work Wood applied pre-treated in the workshops or at the place of use. The material comes in the form of boards, logs, bars, rails, etc. The speed, convenience and quality of cutting are provided with the help of various equipment and power tools, including both universal models and specialized machines. In addition, carpenters and furniture makers in their work often use additional measuring, marking and controlling adaptations that have unusual names. A simple man in half is unlikely to think about what the reysmus is, and what is Fuganok. And here house masterself-repairing on panstone Or in the house, must necessarily understand such matters. Of course, it applies to professionals.

What is the flight for what is needed

Definitely answer the question, which represents a flight, difficult. On the one hand, it is called a simple auxiliary tool consisting of a pair of three details. With it, it produces accurate marking of lines, holes, locations of spikes, slots, etc. On the surface of any workpiece. On the other hand, the pillar is a woodworking machine that performs the thickness adjustment with simultaneous execution. finishing Lumber. Equipment opportunities allow to reduce to a minimum waste production, which is important for enterprises, and for private developers.

From the German "Reysmus" is interpreted as "drawing size". The hand tool fully corresponds to a similar interpretation, since with the help of this device the line from the drawing falls on the workpiece. But the detailed marking of the sawn timber on the machine applies already to additional features. The equipment itself has a lot of great opportunities, the main of which is considered to be the final seignment of wooden products in thickness after processing their front side on the fugoval machine.

Manual flights

The tool has simple designconsisting of at least three fundamental components:

Work plank with a scale or without scale;

Clamping pads;

The so-called debris.

In addition, the flight is equipped with adjusting screws. For the possibility of simultaneously conducting multiple laying lines, the tool is equipped with two-three parallel straps located in holes drilled in the block. For the drain, it is allowed to use pencils, sharpened drills, durable pointed pins and even self-tapping screws.

For the convenience of drawing curvilinear lines, a roller is often installed on the work strip.

The tool is made of dense wood or metal on the video, you can see what is the posts for marking, as well as fast way Its manufacturer.

Raysumovoy Machine.

Multifunctional woodworking equipment is located on the bed. The billet, which manually or automatically moves to the cutting elements, is laid on the horizontally located workstation. The knife shaft hangs reverse side lumber, cutting off the unnecessary layer to necessary thickness. So that the workpiece when moving does not hang out from side to side, it is held on the sides with rollers, straps or rollers.

The route machine is often confused with fugoval. But the design of the latter includes at least three knives. They perform a deeper damn itching from the workpiece. On the flight, the product enters only after pretreatment on fugoval equipment, since the material on the workstation can be laid only by a flat side.

Raysumovoy machines are:

Single and bilateral;

Outdoor and desktop.

One-sided model belongs to budget equipment. The knife shaft in the design is above the working platform, so the replication occurs only on the one hand. Two-way machines have two knives - above and on the working surface, which allows the processing of two planes at once. Such aggregates are indispensable for large amounts of work.

When choosing a flight, pay attention to its capacity and productivity, on possible dimensions of blanks and the number of knife shafts. An important indicator is the mass of equipment, as it has a huge impact on the degree of vibration of the machine during operation. A couple of factors that are interested in are to preserve the possibility of adjusting the thickness of the scheduling layer and the depth of cut into one pass. It is these characteristics that will help determine the functionality of the machine and the convenience of its operation.

When installing equipment, it is necessary to ensure its reliable fixation. This applies to both outdoor and desktop models. The stability of the position will prevent dangerous situations When operating a flight machine, and also contributes to obtaining more accurate results in the processing of sawn timber and applying the required tags. The manufacturer's instructions are given instructions on right fastener Stannes. As a rule, it is produced using bolts included in the reysmaus kit.

It is allowed to start only after set by the machine with a necessary speed of rotation of the knife shafts.

It is important to understand that for one-time work, acquire woodworking equipment will be an economically disadvantageous solution. Much more rational - rent a machine, minimizing the time to use it. Before contacting the rental service construction tools, it is recommended to intelligently compose the steps of working with wood material, temporarily abandoning the concomitant processes.

As for manual flights, it is quite possible to make it own hands. There is no difficulty in this, and the model will be done under individual requests. Tool variations can be found in large quantities On the Internet.