Instructions for heating boiler ariston. Heating boiler Ariston: how to choose the best device for heating your home. By the type of removal of combustion products, burners are divided into

Systems are experiencing a rebirth today autonomous heating... This is due to the fact that a boom in individual construction began in the country not so long ago. It is rather difficult to connect a country house to central communications. If this is done, then the coziness and comfort in such a dwelling will depend on a number of unreliable factors, including the condition of the pipes, the operation of the boiler room, etc. This can also include centralized power transmission.

If you also decide to follow the experience of the majority and choose a gas boiler for heating a suburban building, then it is certainly recommended to read the operating recommendations, from which, among other things, you can learn how the gas boiler works, how to turn on this equipment, and also how to avoid it premature breakage. For example, in order to exclude the ingress of foreign bodies into the system, a hard filter should be installed at the inlets of running water, gas, as well as the heating circuit. It is also important to ensure that a voltage stabilizer is present in the system, which is located at the input to.This will protect the control board from voltage surges in the network.

If you are wondering how to turn on a Baxi brand floor gas boiler, you must follow a certain technology. In the first step, you must open gas cock, it is usually found under the equipment itself. It is important to make sure that the system has the right pressure, only then can you apply power to the device. Then press the "Start" button and set the device to the "Winter" or "Summer" mode.

There are special buttons on the panel with which you can set the desired temperature values in the boiler and hot water circuits. This will activate the main burner. If you have purchased a gas boiler, you need to ask how to turn it on before unpacking the product. After you have completed all the above actions, you need to make sure that the boiler is working, this will be indicated special character burning flame on display.

Connection nuances

After you figured out how to turn on the gas heating boiler, you can set it to the "Summer" mode, while the device will work, producing only hot domestic water. When starting up, plugs can form inside the fuel pipe. In this case, the burner will not turn on and the boiler will lock out. In this situation, it is necessary to repeat the steps mentioned above. Ultimately, you must ensure that the gas begins to flow into the burner. Then the "R" button is pressed and held for about 2 seconds.

Each owner of his house tries to make it as cozy and comfortable as possible. To achieve this, it is worth considering installing a double-circuit wall gas boiler Ariston, which will help solve the problems with heating the dwelling. The device is very useful in that it will provide heat both in an apartment and in a private house with an area of up to 500 m².

Also, a gas wall-mounted double-circuit boiler Ariston will quickly heat water for instant use. In this case, a person does not have to connect a boiler, which will require additional investments and a separate place for installation.

Descriptions of the double-circuit boiler Ariston

Today, on the market for gas boilers, you can find many interesting models. This is quite convenient, since everyone can choose a device that is most suitable for the price, type, characteristics and installation method. Double-circuit wall-mounted boilers Ariston gained their popularity due to rare situations with their malfunction, as well as silence during work, which is very important for maintaining a calm atmosphere in the house.

One of the most important components in all gas boilers is the burner, in this case it can be modulating or conventional. The first option is more popular than the second. When using it, the entire system will be regulated automatically, without human intervention. In this case, the capacity of the installed heating equipment depends on the temperature indicators.

The burner is also divided into 2 types:

open;

The safest is, since it does not imply the ingress of combustion products into the room in case of emergency. Also, in this case, the owner does not have to worry about building a chimney. A special coaxial pipe must be brought to a closed burner, it can always be brought out in any accessible place.

Cauldron Ariston open type, in any case, requires a chimney to bring the combustion products outside. Also, don't forget about natural cravings. The air will enter the system from the living area, so it will have to be constantly ventilated.

Coaxial pipe used in closed system combustion, the good feature is that it is made of 2 layers. One is necessary for the removal of combustion products, and the other will ensure the ingress fresh air inside the boiler. Thus, the owner of the equipment does not have to constantly ventilate the room and worry about natural draft. The room will always have a sufficient amount of oxygen.

Distinctive abilities

According to reviews of Ariston gas wall-mounted double-circuit boilers, they have 4 distinctive features useful for their owners:

All models of this company are equipped with automatic protection systems.
The presence of a water pump, which is necessary for the constant circulation of water through the pipes.
Possibility to choose a model with an expansion tank. With its help, the pressure will be automatically adjusted inside the heating system.
Firm Ariston equips its equipment different types ignition. It can be automatic, which will greatly facilitate the life of the owner of a particular boiler. Otherwise, each time the unit is started, a person will need to press a special button.

What are the advantages of gas boilers Ariston

Per Lately the popularity of the Ariston brand has increased significantly due to high-quality gas boilers, and this is not in vain. works silently and consumes fuel in the most minimum quantities as soon as possible. This will allow the owners of the unit to save on utility bills and, at the same time, provide the home with comfort and warmth.

The client will receive a high-quality device that provides round-the-clock water supply and heating of the house, even with a large area of up to 500 square meters... Also, do not forget about the durability of each boiler. The terms specified in the guarantee are much shorter than they actually turn out to be. In terms of dimensions, the equipment is much more compact than that of other brands, which means that it can be installed absolutely anywhere, even in a small apartment with restrictions on free space.

Specifications

Almost all gas boilers from the Ariston brand have a capacity of 15 to 30 kW. Thus, each client will be able to select the necessary indicators for the size of his apartment or house. Also worth noting others distinctive characteristics such gas equipment:

with maximum efficiency, the boilers have high level coefficient useful action;
all wall-mounted boilers have Russian instructions and designations on the equipment itself, so citizens do not have problems with controlling the unit;
most models from this manufacturer are able to perfectly cope with water in the system and low pressure;
special attention to this equipment should be given to those people in whose houses voltage drops often occur. Ariston boilers handle such surges in the network without problems;
all models are very easy to operate. To start using the boiler, you do not need to study the instructions for a long time, all the operating features are intuitive and accessible even for those who install such a unit for the first time.

In some cases, the boiler cannot simultaneously heat water and provide sufficient heating of the room, this applies to budget models. In this case, a person needs to think about installing an additional boiler.

Note! If we talk about expensive units, they have a special display that shows different characteristics, including the temperature inside the boiler and outside. This is very convenient in terms of entering the necessary characteristics for the correct operation of the equipment.

Operating instructions for gas boilers Ariston

Before purchasing a gas boiler Ariston, you need to understand that if the buyer does not understand its installation, it is better to contact experienced specialists and entrust all the work to them. Indeed, even with the maximum detailed instructions not the fact that the case will end successfully. In this case, there is every chance of damaging the equipment, after which you will have to call repairmen, and this will result in additional costs.

It is very important to keep children away from the equipment. To do this, after, it is necessary to conduct a conversation with them and explain accessible language that nothing can be twisted and displayed on the unit, only an adult should do this. If the family leaves, for example, on vacation, after the boiler is turned off, it is also necessary to shut off all pipes for the supply of gas and water. Only then is the equipment disconnected from the network.

If a display is provided on any model, all the indicators that it displays must be strictly controlled. It can display malfunctions or deviations from normal operation that occurred during the heating process.

One of the most important points in the instructions for gas equipment is safety precautions. Before connecting the boiler, you need to familiarize yourself with it first.

What are the types of wall-mounted boilers Ariston

All Ariston boilers are divided into 3 series. They have different technical indicators and functions, namely:

Clas - this series means more bulky and powerful devices for heating residential premises. They are equipped exclusively with special regulators that automatically regulate the gas supply. This is necessary to save fuel, which is very convenient in terms of costs for public Utilities and with frequent business trips of the owner of the house.
Genus. These are the most innovative and multifunctional models of Ariston gas units. They have more features than other boilers from this manufacturer. Together with the equipment itself, the buyer will receive such additional accessories as a fan required for smooth speed control, as well as heat exchangers, primary and secondary. All devices from the Genus line are distinguished by the presence of a large liquid crystal display. It will display all the characteristics that correspond to the operation of the boiler at the moment.
Egis. Units from this series have small size and attractive appearance, which earned them great popularity among the owners small apartments... The device will fit well into any interior. An important feature of these boilers is that, given their size, they have a fairly high level of efficiency and low fuel consumption, which is controlled by an intelligent control system.

Because of what the wall-mounted boiler may be faulty

The main reasons for the malfunction of the Ariston gas boilers include the following:

During the maintenance of the burner adjustment or control units, the specialists made mistakes.
Failed installation.
Buying a fake, which is distinguished by low-quality components.
Lack of feed enough air.

Conclusion

When buying one of the Ariston wall-mounted gas boilers from the seller, you need to check the availability of all necessary documentation which

will confirm that the equipment is in accordance with the manufacturer. Only in this case, problems with the device will arise very soon.

One of the most important design tasks autonomous system heating is the choice of equipment that heats the coolant before it is fed to the batteries. Both the efficiency of the climatic network and its economy depend on this device. Ariston gas heating boilers are rightly recognized as one of the best heating units on the modern market, the features of which we will talk about below.

Brand history

The year of foundation of the Italian company Ariston is considered to be 1930. Its first manager, and at the same time the owner, was the engineer Merloni. The company began its activities in a place called Fabriano, but at that time it specialized exclusively in the production of various scales.

After a certain time, the range of manufactured goods was expanded at the expense of gas climatic equipment and cylinders, in which liquefied fuel was stored for them.

Over time, the experience of employees and innovative developments in the field of climatic equipment have transformed into the most modern, ergonomic and inexpensive solutions for arranging individual heating systems - gas heating boilers Ariston.

The very name of the trade mark is translated from Greek as "best" and speaks for itself. This brand was registered in 1960. Now the trademark, like the plant producing gas boilers, is part of the large corporation Merloni TermoSanitari S.p.A., which occupies one of the leading places in Europe among the manufacturers of climatic equipment.

Heating gas boilers Ariston are distinguished by a completely affordable price and compact size. And the instructions for operating, configuring and maintaining the devices are so simple that you can easily perform all the necessary operations with your own hands.

In addition, experts appreciate Italian equipment for other advantages:

Exceptional ease of installation for ease of installation
compact dimensions, allowing boilers to be fixed even in small rooms;
attractive design that organically complements the interior of the premises;
an ergonomic control panel that allows you to adjust the parameters of the heater in a wide range, achieving maximum comfort and efficiency;
noiseless operation.

Most of the models come with a standard burner, heat exchanger and controller. expansion tank, security group and circulation pump... That is, by purchasing a gas heating boiler Ariston, you get a complete solution that can be connected to pipes without any difficulties.

The most popular are the following series thermal equipment Italian company:

Egis;
Clas;

Note! Regardless of the model, all Ariston boilers are double-circuit. This means that they will not only warm you in winter, but also supply you with any amount hot water necessary for household needs.

Varieties of boilers

Ariston egis

A feature of the Italian gas boilers Ariston of the Egis line is their adaptation to domestic gas and electricity supply lines. They perfectly withstand strong fluctuations in the voltage in the network and maintain the operation of the burner even with a very strong pressure drop in the main gas pipelines.

This device is specially designed to provide warmth to dwellings located in harsh climatic zones... The device will function properly at an outside temperature of 50 degrees Celsius. In addition, the units are equipped with special condensate collectors. Therefore, you do not have to worry about where to put the moisture that forms in the outlet.

Ariston Egis boilers are equipped with two heat exchangers:

primary - made of copper, covered with a specially designed protective layer;
secondary - made of stainless steel, which increases its strength and extends its service life.

In addition, gas heating equipment of this type has additional nodes and units:

cleaning filters, thanks to which a high quality coolant enters the boiler;
temperature sensors that change the boiler operation modes depending on the temperature inside the house and outside;
an expansion tank, which compensates for the increase in pressure in a closed heating network after it is put into operation;
, which accelerates the flow of liquid, reduces the inertia of the system and increases its efficiency.

In addition, other features of the Ariston Egis boilers line can be mentioned:

The presence of a controller that analyzes the composition of the air that is emitted into the atmosphere and checks the quality of the gas supplied to the burner.
The ability to set the minimum operating power, which saves energy, but does not allow the liquid to freeze in the pipes (used in country houses when the owners leave for a long time).
The presence of modules for protection against the formation of mineral deposits, freezing of liquid in the pipes and pump breakdown.

Note! Gas boilers of this line are equipped with electronic system control, which allows not only to manually change the operating modes, but also to program the operation of the unit depending on the time of day, day of the week, and so on.

Ariston clas

This type of climatic equipment includes quite powerful boilers that combine excellent technical characteristics and ease of use.

There are two types of heaters of this type:

With open chamber combustion (CF);
with a sealed combustion chamber (FF).

The work parameters are set from the digital control panel. The boilers are hung on the wall using the brackets included in the kit and perfectly fulfill their task of providing the premises with heat and preparing the required amount of hot water.

A special controller independently changes the power of the equipment and the rate of circulation of the coolant, depending on the temperature outside the house. Thus, after turning on the boiler, the temperature in the dwelling rises as quickly as possible for the water heating system.

The hot water supply subsystem deserves special attention. The special shape of the heat exchanger makes it possible to ensure its presence in the tap within five seconds after turning on the second circuit.

In addition, special settings support the heating mode so that the water in the hot water supply pipes does not cool down for another 30 minutes after the command for heating is received.

Boilers of this type are specially designed for equipping autonomous heating systems in city apartments. They are distinguished by the most compact dimensions and close arrangement of inlet and outlet nozzles. All controls and connections are positioned to maximize ease of use.

If the running water heating system does not suit you, you can purchase single-circuit boilers... They are used only for heating, however, it is possible to connect storage boilers. Thanks to these devices, you will always have enough a large number of hot water.

All Ariston Clas boilers are designed for use in Russia, they tolerate voltage drops and gas pressure fluctuations well.

In addition to all of the above, the equipment of the Clas line has some other unique features:

Easy adjustment. You just set the switch to the mode you need (summer-winter, weekday-weekend, and so on), and the boiler controller itself sets the required parameters for the operation of the climatic equipment. In this case, the temperature is analyzed both inside and outside the premises.
A sensor located in the channel that outputs combustion products analyzes their composition and, based on the data obtained, regulates the operating mode of the exhaust valve.
For safe use equipment, the boiler is already equipped with a pressure gauge, safety and bypass (bypass) valves, a thermostat, and so on.

Note! The described equipment also has “Anti-ice” and “Anti-water” safety modes, which prevent unit breakdown in case of freezing of the coolant or airing of the system.

Ariston genus

These units are the most functional and richly equipped. They have a special liquid crystal display, thanks to which you can not only set operating modes and monitor various parameters, but also perform boiler maintenance (this can only be done by specialists, focusing on the indicated error codes).

Another very important feature boilers Ariston Genus - the ability to work on main and cylinder (liquefied) gas. For converting the burner, the scope of delivery includes all necessary details and tools.

The boilers are as compact as possible, but powerful enough gas burner... The climatic equipment can be used both for heating small apartments and for heating rather large individual cottages.

Despite the high power, Ariston Genus boilers are among the most economical. A special control device precisely sets the required temperature of the coolant, ensuring economical gas consumption.

In addition to all of the above, Ariston devices of this line have other features:

A special programmable controller that allows you to set operating modes depending on external conditions(temperature, time of day, season, and so on).
A pump with several speeds, which makes it possible to organize a more intense flow of liquid. This increases the efficiency of the climate network and makes it more economical.
A spacious expansion tank that allows you to connect the boiler to heating systems with a large volume of circulating coolant.
Filters mechanical cleaning protecting both the inlet pipe for filling the coolant and the inner circulation circle.
The boiler control panel is completely Russified, which makes working with it as convenient as possible.
Special sensors prevent boiler breakdown in case of ice formation, failure, formation air congestion and other troubles.

Installation of heating equipment

Before describing the sequence of steps for installing the device, it should be noted that the installation of gas equipment - heating or any other - can only be carried out by certified specialists after you receive permission from the organization that supplies the main gas.

In general, the boiler is installed in the following sequence:

A coaxial angle is set, through which combustion products will be ejected and fresh air necessary to maintain the operation of the burner will be taken.
The place of contact of the coaxial channel with the material of the house wall must be protected with special gaskets, and the pipe itself must be secured with a clamp.
Then the boiler itself is mounted... For this, the brackets supplied with the equipment are used. Remember that you need to fix the device only on a solid wall, since interior partitions, especially drywall, will not support its weight.
A gasket must be made between the back of the boiler and the wall. non-combustible material protecting the building structure. This is mandatory requirement fire safety.
Then, on the inlet pipes of the boiler is mounted shut-off valves through which all pipes are connected: heating. The use of taps allows you to cut off the water flow and dismantle the boiler in the event of a breakdown without draining the coolant from the system.

As soon as the installation of the boiler is completed, you can start it up. To do this, the system is filled with water, air is removed from it with the help of air valves (Mayevsky taps), after which the device is turned on according to the instructions. No more complex manipulations are needed.

Conclusion

Heating boilers of the Ariston trademark are undoubtedly reliable and high-quality elements of the climate system. However, in order to achieve maximum comfort, it is necessary to choose the right heating radiators, pipes, thermostats and other important equipment.

For more details, see the video below.

For twenty years the Italian company "Ariston" has been producing and selling equipment of a high level of quality in the markets not only of Russia, but also of many European countries... All equipment meets European standards and has a high level of durability and strength. All products of the Ariston company simultaneously combine environmental friendliness, reliability and a high level of quality. What characteristics distinguish the Proterm bear gas boiler, read.

Technical characteristics of the gas boiler Ariston

The whole the lineup heating gas boilers Ariston has almost the same functions, regardless of the price. All menus are provided in Russian.

Guarantee for heating equipment the standard type is valid for two years, and for condensing boilers it is equal to three years. Any Ariston thermo-equipment is incredibly easy to maintain, install and operate.

The following functions are responsible for safety:

Circulation pump blocker;
Make-up system semiautomatic;
Scale protection;
Automatic evacuation of air from the heating circuit of the device.

The sizes of Ariston gas boilers are different, but average 700/450/600.

You can also control a gas heating boiler using a remote controller. If something goes wrong, the system will analyze and immediately report a breakdown.

Types of gas boilers Ariston

The heating equipment market is literally replete with products of the Italian company "Ariston". Many buyers prefer the evo and comfort models, as well as the following types of gas heating boilers:

boiler Ariston Egis plus 24 ff, it is resistant to voltage drops and works normally at low gas pressure;
gas boiler Ariston 24 cf, it is designed to maximize resource saving while maximizing the effect of its operation;
gas boiler Ariston genus evo 35 ff, has a triple water filter and perfectly adapts to variable indicators supply of resources, to low water consumption;

Ariston double-circuit heating gas boilers are mounted both on wall panel and are installed directly on the floor. The presence of two circuits indicates that the gas boiler can simultaneously heat the room and supply hot water. Boilers of the series fall into this category:

Clas,
Egis,
Genus.

The most "powerful" in terms of functionality are the Genus heating boilers.

This group is equipped with primary and secondary heat exchangers. They have high performance. All boilers have an LCD display. Read more and how much they cost.

How to install and start a gas boiler Ariston?

If the boiler is installed on their own, then it is necessary to carry out the installation in the following sequence:

It is necessary to install a coaxial angle on the heating boiler, make technical measurements of the distances from the center of the corner to the edge of the gas boiler. According to the standard, this distance should be 105 mm.
Lay the base of the corner with cushioning material and fasten the clamp to it.
Before directly installing the chimney, it is necessary to make a hole for it in the wall and only then screw the fastening strip.
It is more convenient to connect the branch with two people.
Next, you will need to solder the polypropylene pipes.
Connect polypropylene to metal-plastic pipes.
Install control valves.

Only after performing these manipulations can the gas boiler be started.

The launch is quite simple:

After the gas is supplied, it will be necessary to pump liquid.
Check the working pressure level (0.8-0.9 atm).
Then the "winter" mode is set, provided that the heating boiler belongs to the double-circuit category.
We connect to the network.
If the boiler does not turn on, then it is necessary to turn the plug in the socket (many Ariston boilers depend on the phase).

Operating instructions for the gas boiler Ariston

Malfunctions of the gas boiler Ariston

The most popular error codes for heating gas boilers Ariston:

boiler Ariston error 5p3 - "Flame separation" often occurs in the absence of grounding;
boiler Ariston error 501 - "lack of constant pressure" should be solved only by a specialist, since the pressure is regulated using a pressure gauge.

Repair of gas boilers Ariston

The manufacturing company does not recommend repairing or adjusting the heating gas equipment Ariston on its own, because any intervention in the system heater will void your warranty. Therefore, if a significant breakdown is found, then you will have to eliminate it for your own money.

Spare parts for gas boilers Ariston

Components for heating equipment of the Ariston company can be purchased from dealers or contact service centers in the region and ask them for more detailed information about spare parts. For example, room thermostat for a gas boiler Ariston can be purchased at almost any specialized store.

Gas boiler price Ariston

Ariston's range today includes 3 models of double-circuit gas boilers to provide residential buildings with heating and hot water supply. For premises less than 200 m2, the BS II model is offered, and for areas of 200-350 m2 BS II, EGIS PLUS and CLAS B.

The advantage of the devices is the cost of generating heat in comparison with all other types of boilers. The disadvantage is the need for a central gas supply system and a constant power supply.

Gas boilers are suitable for heating and hot water supply of residential apartments and country houses, being a cheaper alternative to central heating.

General characteristics of boilers

Familiarity with the characteristics is necessary to the right choice device models:

Execution - floor or wall-mounted. The mounted version has more compact dimensions, but also a smaller generated heat output... Differences in functionality in modern models no.
Combustion chamber type. An open chamber draws in air from the room, and ejects flue gases through the chimney. The closed chamber can produce air intake and exhaust gases one by one coaxial pipe... For installation in an apartment, it is preferable closed chamber combustion.
Thermal power of each circuit in kW. The area of the heated room depends on the parameter. Approximate calculation of 1 kW per 10 m 2 of the room.
Coefficient of performance (COP). It characterizes the efficiency of the device for the transfer of energy obtained during gas combustion. The higher the efficiency, the less fuel will be required to heat the water.
Heat carrier temperature in ° С and range of its regulation. It is necessary to select a device that provides the desired temperature.
Circuit capacity in liters per hour. When assessing this parameter, it is necessary to take into account the average water consumption for hot water supply; it may be advisable to use a storage structure with an installed one.
Availability of protection functions and comfortable control , a wide selection of operating modes.

Model line

BS II - wall-mounted gas boiler for heating and hot water supply in apartment buildings... The boiler has a compact design, low weight and two reliable separate heat exchangers:

	BS II 15 FF		BS II 24 FF		BS II 24 CF
The combustion chamber	closed				open
	11-15		11-25,8		11,2-25,8
	11-28		11-27		11-27
	89,6		93,8		91,9
	89,3		93,6		91,2
	35-85
DHW circuit temperature, ° С	36-60
	13,6
	9,7
Weight, kg	30
Price, rub	36 500	42 000		39 000

CLAS modelB It has wall execution and a built-in boiler for 40 liters from of stainless steel... The device is designed for high water consumption in the DHW circuit, combining the functions of a storage and instantaneous water heater.

The model is equipped with a digital display for comfortable control:

	CLAS B 24 CF	CLAS B 24 FF	CLAS B 30 FF
The combustion chamber	open	closed
Thermal power (heating circuit, kW	11-25	11-25,8	13-31,3
Thermal power (DHW circuit), kW	11-27	11-27	13-31,3
Efficiency at 100% thermal power,%	91,9	93,8	93,6
Efficiency at 30% thermal power,%	91,2	93,6	93,2
Heating circuit temperature, ° С	35-82
DHW circuit temperature, ° С	40-65
DHW circuit performance when heating water at 25 ° C, l / min	22,8		25,2
DHW circuit performance when heating water at 35 ° C, l / min	16,3		18
Weight, kg	52	55
Price, rub	84 000	87 700	90 000

EGIS modelPLUS is available in a 24 kW version and is a worthy continuation of the BS II series.

The boiler has a wall-mounted design and is equipped with a comfortable digital control panel, the price does not exceed BS II:

	EGIS PLUS 24 CF	EGIS PLUS 24 FF
The combustion chamber	open	closed
Thermal power (heating circuit, kW	11,2-25,8	11-25,8
Thermal power (DHW circuit), kW	11,2-25,8	11-25,8
Efficiency at 100% thermal power,%	91,9	93,8
Efficiency at 30% thermal power,%	91,2	93,6
Heating circuit temperature, ° С	35-85
DHW circuit temperature, ° С	36-60
DHW circuit performance when heating water at 25 ° C, l / min	13,6
DHW circuit performance when heating water at 35 ° C, l / min	9,7
Weight, kg	30
Price, rub	35 500	39 900

Instrument selection

When choosing a device, you must be guided by the following criteria:

The area of the heated room in m 2. It is necessary to choose a boiler based on 1 kW of thermal power per 10 m 2 of the room. At the same time, it is necessary to understand that it is perfect option and taking into account the heat loss of the dwelling, the average annual air temperatures at the installation site and the radiators used, a correction factor must be entered. For a preliminary estimate, we advise you to use any online calculator that takes into account the above factors, and also introduces corrections for the location of the walls (windward or not), the height of the ceilings, and the type of windows.
The need for hot water. For large consumption, it is reasonable to choose the CLAS B model with a built-in boiler, which is more economical.
Boiler installation location. For water heaters with an open combustion chamber, room equipment is required forced ventilation, since the combustion air comes directly from the room. Since devices with an open combustion chamber are designed to remove combustion products through a chimney with natural draft, it is necessary to provide a place for installing the chimney and chimneys.
IMPORTANT! It is not allowed to pass chimneys through structures made of flammable material.

Gas boiler device

Boiler malfunctions

Most of the malfunctions that occur can be prevented at the stage of boiler installation. Here is a list of the main malfunctions, their causes and measures to prevent the failure of the device:

Failure of the control board. It occurs, as a rule, due to poor quality of electricity - power surges, frequent power outages. To prevent breakdowns for this reason, it is necessary to provide. For a private house good decision will be the installation of a backup diesel generator and an automatic transfer system. It is necessary to protect the device with a circuit breaker, power it separately cable line and reliably ground.
Deterioration of the passport characteristics of the device, expressed in underheating of water or reduced performance during heating. It is associated with the presence of contaminants in the water, excessive water hardness. In both cases, deposits appear on the tubes of the heat exchanger, which impede the heating and passage of water in the system. To solve the problem with pollution, it is necessary to install a filter, and when using water with a high calcium content, it is recommended to heat the water to 45-50 ° C.
Frequent stops due to insufficient water pressure. The fault is detected by the device and causes a safety stop. Before purchasing the unit, it is necessary to find out the parameters of the supply water network and make changes to it if the pressure is below 1.5 bar. If the pressure is higher than 6 bar, provide for the installation of a pressure reducing valve. If the parameters of the main network are normal, then turn off the boiler and check the system for leaks.
Frequent stops on the smoke exhaust system. BEFORE installing the unit, calculate and install the gas ducts and chimney providing the required traction.
Frequent stops for lack of air. Before installing the appliance, equip the room with a supply ventilation system.
Inconsistency of the operating modes with the declared ones, the inconsistency of the coolant with the specified parameters. The main reason is incorrect commissioning and incorrect settings of the device. Careful reading of the instructions often solves the problem. If necessary, you should involve a qualified specialist who will commission and instruct you on how to work with the device.

When choosing a model, contact the company which will pick up necessary equipment based on your requirements;
Entrust the installation and commissioning of the device a qualified specialist;
Read the instructions carefully for operation;
Do not neglect periodic preventive check-ups and service equipment;
In case of any frequently recurring malfunction, turn off the boiler. and call a qualified technician;
Trust the repair and supply of spare parts only a certified organization.