De Dietrich floor and wall gas boilers, floor diesel boilers, condensing boilers. Heating boilers De Dietrich Wall mounted models De Dietrich

Wall mounted gas condensing boilers DE DIETRICH NANEO PMC-M and PMC-M ... MI

These are modern, highly efficient heating devices from the world famous French company, designed to work on natural gas or propane.
The principle of operation of the condensing boiler consists in using the energy contained in the water vapor of the combustion products (latent heat of vaporization). To obtain an average annual efficiency of about 109%, it is necessary to correctly calculate the area heating appliances(for example, underfloor heating, low temperature radiator heating etc.) to get as much as possible low temperature in the return line - below the dew point during the entire heating period.
Naneo series boilers are the most compact on the market!

A series of wall-mounted gas boilers from the De Dietrich company of the NANEO series is represented by the following models:

PMC-M 24: single-circuit boilers for heating only, power from 6.1 to 24.8 kW. To organize hot water supply, it is necessary to additionally buy a BMR 80 or SR 130 storage water heater.
PMC-M 24 + BMR 80- with a water heater De Dietrich BMR 80, with a capacity of 80 liters, which is installed to the right or left of the boiler;
PMC-M 24 + SR 130- with a water heater De Dietrich SR 130, with a capacity of 130 liters, which is installed under the boiler.
PMC-M ... MI: double-circuit boilers for heating and hot water supply flow type with a plate heat exchanger, power from 6.1 to 35.7 kW (in DHW mode, power is 37.8 kW). The DHW comfort level is 5 stars in accordance with EN 13203, provided by a plate heat exchanger with a large heat exchange area.

The De Dietrich PMC-M 24 and PMC-M… MI wall mounted gas condensing boilers are supplied fully assembled and tested at the factory and preconfigured to operate on natural gas. Boilers can also operate on propane after a simple setting using a modulating thermostat room temperature or a service module (supplied as additional equipment).
The PMC-M 24 boilers are initially equipped with a heating / DHW changeover valve for connecting a DHW cylinder.

Advantages of De Dietrich NANEO series wall-mounted gas boilers:

All the advantages of condensation in a compact design - lower fuel costs. Savings from 30% to 40% in comparison with the classic boiler of the old generation!
Fully pre-configured condensing boilers;
Very compact: 368 x 589 x 364 mm;
Very lightweight boilers with an innovative design - only 25 kg weight;
Equipped with a highly efficient, compact cast aluminum silicon heat exchanger;
Extremely easy to use and highly efficient gas condensing boilers.
The minimum level of emission of harmful substances into the atmosphere.
Hot water capacity up to 19 l / min in compact design (РMC-M-MI);
Rapid volume replenishment hot water for continuous drawdown (models with a DHW cylinder);
Burner power modulation from 24 to 100%;
A heat exchanger made of an aluminum-silicon alloy provides: chemical resistance to acidic flue gas condensate; very good heat conductivity (5 times better than steel); low weight (3 times lighter than steel) allows you to get a compact boiler and simplifies it Maintenance; high fluidity of the alloy allows the manufacture of a heat exchanger complex shape with a large heat exchange area; reduced water volume, ensures high reactivity of the heat exchanger; eco-friendly material that can be recycled and reused.

Technical characteristics of gas condensing boilers De Dietrich PMC-M 24 and PMC-M… MI:

Boiler type: condensing
Maximum working pressure: 3 bar
Maximum operating temperature: 90 ° C
Safety thermostat: 110 ° C
Power supply: 220 V, 50 Hz
Efficiency up to 109.2% (at 30% of rated power boiler and temperature conditions 50/30 ° C).
Nitric oxide emissions: NO 60 mg / kWh: class 5 in s

Technical characteristics of wall-hung gas boilers Dee Dietrish

Features of wall-mounted gas boilers De Dietrich NANEO PMC-M 24 and PMC-M… MI:

The boiler can be retrofitted with a mounting frame or a hydraulic connection kit (accessory);
Gas boilers De Dietrich PMC-M are designed both for new heating installations and for replacement of old equipment, thanks to replacement kits for old boilers (optional equipment);
Various configurations for combustion air intake and flue gas evacuation are possible: vertical or coaxial chimneys, connection to chimney, separate pipelines for air intake and combustion products removal, connection to a collective sealed chimney (3CE p).
The composition of the gas / air module: modulating gas burner with a modulation range from 24% to 100%; check valve for work with a collective chimney under overpressure; central module; venturi pipe; a fan with a silencer for supplying combustion air; gas supply tube;
The hydraulic module contains 1 speed circulation pump heating (modulating pump class A - optional), heating / d.h.w. changeover valve, plate heat exchanger with a large heat exchange area for heating domestic hot water in models PMC-M ... MI, safety valve 3 bar, flow limiter, flow sensor for models PMC-M… MI;
Expansion tank with a capacity of 8 liters, built into the base frame.

Overall and connecting dimensions condensing boilers De Dietrich NANEO PMC-M

A very easy to operate removable control panel is located under the PMC-M boiler. If necessary, it can be installed separately on the wall. The control panel and the central module of the boiler are connected via BUS.
Equipped with 2 knobs for adjusting the temperature: for heating and for hot water supply, as well as 2 buttons with LEDs for indicating the status: "chimney sweep" and "reset" (reset). The rest of the parameters can be set using various accessories: a modulating room temperature thermostat (setting the heating curve slope, maximum boiler temperature, etc.) or a service module.
Additional equipment is also available to control room dependent and / or outside temperature

De Dietrich chimney for PMC-M 24 and PMC-M ... MI boilers

Various configurations for combustion air intake and flue gas evacuation are possible:

horizontal coaxial chimney PPS Ø60 / 100 mm. with the ending (DY 871) - type С13х;
vertical coaxial chimney PPS Ø80 / 125 mm. with the ending of black (DY 843) or red (DY 844) color + adapter (HR 68) - type C33x;
chimney connection (type B23p or C93x);
separate pipelines for air intake and combustion products removal (type C53x);
connection to a collective sealed chimney (type C43x).

These flue accessories are ordered as accessories.
Connection to the heating circuit.
De Dietrich PMC-M boilers can only be installed on heating systems with a closed heating circuit, which must be flushed in order to remove various particles left after installation, as well as sludge deposits that can cause the installation to malfunction. It is also necessary to protect the heating system against possible corrosion, hard salt deposits and the growth of microorganisms with a corrosion inhibitor, which must be suitable for all types of heating systems (steel and cast iron radiators, floor heating with XLPE pipes). The chemicals used for the treatment of heating water must have appropriate certificates and recommendations for use.

Wall hung gas boilers DE DIETRICH MS 24

Traditional low temperature wall-mounted boilers The de Dietrich series MS 24 and MS 24 MI are designed to operate on natural gas, with the possibility of converting to propane after installing additional equipment. You can buy models with open chamber combustion for connection to a chimney or with a closed combustion chamber - for connection to coaxial chimney.
Boilers MS 24 FF are single-circuit gas boilers designed only for heating, compact dimensions: 730x400x299 mm.
For hot water supply, cylinder water heaters can be connected to them, since boilers of this type are initially equipped with a heating / DHW changeover valve:
- water heater BMR 80, with a capacity of 80 liters, which is installed to the right or left of the boiler;
- floor-standing water heater SR 130, with a capacity of 130 liters, which is installed under the boiler.
De Dietrich MS 24 MI (FF) boilers use a plate heat exchanger with a large heat exchange area for the production of DHW.
MS 24 BIC (FF) are two-circuit, compact (965 x 600 x 466 mm.) Boilers for heating and domestic hot water with a built-in water heater with a capacity of 40 liters, with open or closed combustion chambers.

Boiler models:
Single-circuit boilers for heating only:
MS 24
MS 24 FF: with a closed combustion chamber, atmospheric burner with a fan.
Double-circuit boilers for heating and hot water supply
MS 24 MI: with open combustion chamber, atmospheric burner without fan;
MS 24 MI FF: with a closed combustion chamber, atmospheric burner with a fan;
MS 24 BIC: with an open combustion chamber and with a built-in water heater;
MS 24 BIC FF: with a closed combustion chamber and with a built-in water heater.

Control panel for gas boilers DE DITRISH MS 24

De Dietrich MS boilers are equipped with a simple and functional control panel with an LCD display on the front, which controls one direct heating circuit and a DHW circuit. As an option, this panel can be fitted with a room thermostat and / or an outside temperature sensor (weather-compensated control), which provide 2 levels of comfort. The control panel contains an anti-freeze function for 2 circuits if the flow temperature falls below 5 ° C. In addition, the control panel contains a complete diagnostics system with indication on the display, a system for unlocking the heating pump and the heating / DHW changeover valve.

Advantages of gas boilers DE DIETRICH MS 24

The primary copper heat exchanger is coated with a layer of aluminum-silicon paint, which increases its heat resistance;
Gas block with 2 safety valves and external power modulation device;
Atmospheric burner with a ramp made of of stainless steel;
Electronic ignition and ionization flame control;
An electronic control panel with a digital display allows you to control the operation of the direct heating circuit and the DHW circuit (DHW sensor - optional).
It is possible to expand the possibilities of control of the circuit by installing a room temperature thermostat and / or an outside temperature sensor (accessory);
Hydraulic block made of composite material (for MS 24 MI, MS 24 MI FF, MS 24 BIC and MS 24 BIC FF) or brass (for MS 24 and MS 24 FF) contains: 2-speed pump with automatic air vent, automatic bypass, heating / DHW changeover valve on the return line, water pressure switch, drain valve, separator, 3 bar safety valve, pressure gauge; for models with hot water supply (MS 24 MI and MS 24 MI FF): stainless steel plate heat exchanger and flow meter with a turbine for determining the hot water flow rate, removable filters for heating and hot water circuits;
Draft sensor for models with an open combustion chamber, air pressure switch for models with a closed combustion chamber (FF);
Exhaust fan and air pressure switch for closed chamber (FF) models;
Expansion tank with a volume of 6 liters for the heating circuit;
Mounting plate for wall mount(included in the delivery set);
Power cable for connection to the mains

The specialists of the Termogorod Moscow company will help you choose the right one, buy, and install a wall-mounted boiler DE DIETRICH, will find an acceptable solution for the price. Ask any questions you are interested in, consultation by phone is absolutely free, or use the form "Feedback"
You will be satisfied working with us!

De Dietrich(De Dietrich or De Dietrich) is one of the world leaders in the production of boiler equipment and the largest manufacturer in France. Production of economical and eco-friendly boilers Dietrich is the main mission of the De Dietrich company.

De Dietrich employs over 2,000 people.

The volume of manufactured products is over 100,000 boilers De Dietrich per year: solid fuel, low-temperature on liquid fuel and gas, including 1/3 of condensation and is more than 400 million euros per year.

The De Dietrich company occupies a leading position and is one of the five leaders in the production of boiler equipment. The company has offices in more than 60 countries.

From the history of the De Dietrich company

The De Dietrich logo is one of the oldest trademarks. The image in the form of a hunting bugle was given to the company in 1778 by Louis XVI and since then has been the guarantor of the quality of the products.

Advantages of De Dietrich boilers

More than two centuries boiler equipment De Dietrich is hugely popular. De Dietrich's success is based on the quality, reliability and durability of the equipment produced. As a leading boiler manufacturer, De Dietrich is constantly improving its equipment.

De Dietrich boiler equipment appeared in Russia in 1993 and since then has gained great popularity. Currently, a full service and technical support boiler equipment price Russia.

De Dietrich boilers quality

The De Dietrich brand guarantees high quality each boiler, from the simplest to the most complex, rich in electronics. Quality control at every stage of production, right from the used technical solutions, materials used and up to production, technical testing and control finished product- all this ensures the reliability and durability of De Dietrich boilers. Heating boilers throughout the entire period of operation confirm the quality of the De Dietrich brand.

Manufacturing innovation De Dietrich

Innovation is core characteristic feature De Dietrich - and the basis for production. The company constantly invests in research and development, this allows the creation of new technologies, the purpose of which is to save fuel and conserve the environment in boilers De Dietrich. Scientific research and the creation of new technologies are engaged in more than 100 employees of research organizations of the De Dietrich company.

Scientific research and innovation ensure the excellent quality of De Dietrich boilers and maintain the high reputation of De Dietrich.

In 1980, De Dietrich developed a eutectic cast iron that has high structural integrity, excellent corrosion resistance and high resistance to sudden temperature changes. The modulus of elasticity of the developed eutectic cast iron is 30% higher than any other cast iron. Eutectic cast iron is used in the manufacture of heat exchangers for De Dietrich boilers. Thanks to this, De Dietrich boilers have an increased service life.

The heat exchanger of De Dietrich boilers has original design, which provides maximum heat transfer and, accordingly, high efficiency.

De Dietrich manufactures boilers with high-quality sectional cast iron heat exchangers, which are designed to work with fan burners on gas or diesel fuel, as well as boilers with atmospheric gas burners... The manufactured boilers have a power range from 12 to 1450 kW and an efficiency of up to 93 - 95%.

De Dietrich also produces steel boilers up to 1500 kW (formerly known as Schafer). The main advantages of De Dietrich steel boilers are: no requirements for the return line temperature and for the minimum volumetric flow, there is no need for an executive feedback unit. Thanks to these features, De Dietrich boilers have an increased resource compared to boilers from other manufacturers.

De Dietrich gas boilers can be supplied with three types of control panels, which differ in the principle of boiler control: Basic B3 - control by an electronic boiler thermostat; Diematic-m3 - programmable weather-dependent; cascade K3 - for slave boilers in a cascade system (models are indicated for boilers DTG 230 and DTG 330).

The official website of the De Dietrich boiler manufacturer in Russia: www.dedietrich-otoplenie.ru/.

Today the owner of the property, decisive questions its heating, can find on the domestic market a huge number of brands and models of heating boilers. And one of the most profitable, reliable and durable units is the products of the famous French brand De Dietrich. Anyone can buy such gas-fired boilers from the TeplovodService company, which is the official supplier of the brand.

Equipment features

Among the main parameters of any De Dietrich boiler, it is worth noting:

long service life (rarely which unit has to be replaced earlier than 20 years later, although the manufacturer gives a 2-year warranty for it);
high levels of efficiency (at least 90%, and when compared with conventional gas heating equipment, then the average effect of the aggregates exceeds 109%), due to which it is possible to achieve very low operating costs;
wide range of capacities different models... For the De Dietrich boiler of the traditional type, the capacity is in the range of 18-342 kW, and for condensing models it reaches 1000 kW. Thus, with their help, you can easily heat and small rooms the size of 100-180 "squares", and large industrial facilities with an area of several thousand square meters. m.

In addition, any of the De Dietrich boilers, which you can buy using our catalog, either have an additional circuit that provides hot water supply, or can be quite easily equipped with a water heater or a boiler, with which it is also possible to supply hot water with quite a decent flow rate (from 11 l / min and above). And most of them can work not only on natural, but also on liquid gas.

Features of choice

When choosing any model of the De Dietrich boiler, you should pay attention to:

the size of the room that requires heating. It should be borne in mind that the power of the unit and the heated area should be approximately 1:10;
availability of space for equipment installation. If there is not too much space, you should opt for wall model, although sometimes it does not match the power. In other cases, a floor-standing version will be required;
the need for hot water. If you can't do without water, you just need a two-circuit model (with or without a boiler). When hot water is not an urgent problem, you can save some money by choosing a single-circuit option. And, if desired, it can later be equipped with a heater.

Delivery of boilers

We deliver to the most short time- already on the day of the purchase, the boiler will be brought to the place and even installed by our specialists, if the need arises.

De Dietrich is one of the oldest brands producing luxury home appliances. It was founded at the end of the 17th century in France and continues to develop successfully, uniting a whole group of companies.

Prestigious brand products

Household appliances "De Dietrich" are produced in 19 factories in six countries of the world, including France and Italy. All products are premium class, presented in 20 countries and are in very high demand. Many types of equipment have been awarded prestigious awards for the use of innovative technologies, integrated design, unique design and implementation of other original ideas.

Ovens from this manufacturer were equipped with a touch control system in the early 2000s. And in 2005, a unique low-temperature cooking program was introduced. All ovens offered by this brand are multifunctional and modern. appearance... They have color displays and easy-to-use control panels. The hobs have an aesthetic design and the largest cooking areas. Induction hobs awarded an award for integrated design approaches. The hoods are equipped with intelligent control systems, and dishwashers- innovative designs.

The De Dietrich assortment is advanced equipment that allows you to implement a variety of processes in the kitchen. The company produces:

... refrigerators;
electric ovens and microwave ovens;
hobs different types;
dishwashers;
hoods, coffee machines, steamers, grills, deep fryers and other equipment.

All products have a perfect appearance, corresponding to modern ideas about beauty. household appliances... Perfect quality is among the main advantages. The company holds the leading position in the world market in terms of the number of innovations being introduced.

Refrigerators and hobs, ovens and dishwashers from this manufacturer practically do not fail. In each country where the brand's products are presented, there are specialized service centers that restore the functionality of the equipment in the shortest possible time.

Selection of household appliances in the Hausdorf store

V lineup De Dietrich potential users can choose a technique that suits a whole range of preferences. In the Hausdorf online store, you can buy various brand products:

one- and two-compartment refrigerators;
induction and gas hobs;
electric ovens with microwave and microwave modes;
narrow and full-size dishwashers with air conditioning or turbo-drying;
multifunctional coffee machines, high-performance hoods and other types of kitchen equipment.

Prices fluctuate widely. However, any model, regardless of cost, has excellent quality and perfectly suits its purpose. The price primarily depends on the feature set. For example, you can buy it for 141 thousand rubles, which will allow you to cook food in seven modes, steam, grill and defrost food. And with programs for the automated preparation of various dishes it costs 318 thousand rubles.

In order to get acquainted with the full line of premium technology, you can go to the manufacturer's official website. The Hausdorf store, the official distributor of the brand, presents models that are in the highest demand among consumers. The reviews say that the equipment of the old French brand is the equipment of the future. Thanks to long-term cooperation with the company, our online store is able to offer competitive prices. Buyers can use the service courier delivery in Moscow.

Gas boilers De Dietrich (De Dietrich)- this is quality equipment for the organization of a heating and water heating system from a company that is a kind of symbol of France. The manufacturer began to produce products back in 1778, and his logo - De Dietrich - received from Louis XVI as protection against falsification of goods.

De Dietrich manufactures domestic boilers, focusing on three rules - durability, quality, reliability - which it has never changed for more than two centuries.

Types and most popular series of boilers De Dietrich

If you only need heating of a private house, pay attention to the single-circuit models of the GT series. Their high power allows to provide heating for more than 300 m 2 of area. Such gas heating boilers are good for a home or small office.

The DTG series are high-quality floor-standing models, unlike wall-mounted ones, they have a lower cost. Simple and economical operation makes the DTG gas fired boiler ideal solution for space heating up to 300 m 2.

Double-circuit units are represented by the DTG X series. Their operation is designed for both hot water supply and heating. Non-volatile boilers can heat no more than 240 m2 of area.

It is important that the heating system is not only efficient but also safe. A turbocharged boiler meets these criteria. Closed chamber combustion ensures efficient consumption of gas and safe work... Oxygen is supplied from the outside through a coaxial chimney.

All De Dietrich models are made of euthetic cast iron. They are not afraid of temperature extremes, rust and other mechanical damage. But in order for the boiler to serve you for many years, it is better to entrust its installation and connection to our specialists. So you can be sure that the work is done with high quality and your expensive equipment is not damaged.