Mobile phone stand - how to do it yourself. How to make a stand for a phone, smartphone at home Do-it-yourself mobile stand

Home master having a minimum of tools and a maximum of diligence, it will not be difficult to make just such a phone stand out of wood. As a material, a 10 mm thick board, plywood is suitable. You can also take plastic with a smaller thickness. The approximate dimensions are shown in the figure. The stand is 10 centimeters high and 8 cm wide (6 cm clean) Installed on two semicircles with a radius of 4 centimeters. Of course, before you get down to business, measure the widest of the phones that will stand in it. A stand for PVC glue is assembled, then decorated at your discretion. For example, in the picture above, the edging is burnished.

Well, here I think I hardly need to explain what, especially to us - people are not young. Yes, many of course found out, the good old "cassette holder" from the audio cassette tape.

We simply take out the cassette, turn the cassette holder over, open it to the other side and the stand is obtained at an angle of about 75 degrees. The width of the "pocket" is about 12 millimeters, the current not thick smartphone fits there perfectly.

Here is such a "brutal" phone stand made of an ordinary aluminum plug. The two outer teeth are bent at the very base at an angle of 90 degrees. The two middle antennae are bent at a distance of 15 millimeters from the base, also at an angle of 90 degrees. Your gadget is nested between them. The fork handle acts as a support.

This stand requires six clothespins and one pencil. The pencil, preferably hexagonal, will slide on the round clothespins. From the photo I think it's clear - four clothespins are legs, two on the top actually hold the gadget, the phone is inserted between their petals. The width adjustment is quite large - for the length of the pencil. By the way, even if you hook a pair of clothespins on the edge of any vertical surface (let's say the wall of a box), they will successfully cope without four other clothespins and a pencil!

This stand is very simple, but also suitable for small phones. This is the usual old bank or discount a plastic card... It should be divided across into three equal parts with a pencil and bent along the lines. But I would make the lower "heel" on which the phone will stand, I would make only a centimeter, and divide the remaining distance into the "shoulder" of the support and support itself.

How often, while at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. How to do this, our step by step wizard Class.

How to make a do-it-yourself phone stand: options for the office and auto

Whether in the workplace or in the car, we all need to always be in touch. At the same time, I do not want to spend a lot of money on expensive coasters, because they can be made from waste and worn-out materials.

Card stand.

The simplest version of a phone holder is a card stand. To make it, you need to carefully bend an unnecessary plastic card in two places, as shown in the photo below, without allowing it to break.

Experience shows that a plastic card holder is very reliable and can even withstand air travel in times of strong turbulence.

Stand made of stationery clips.

To make a phone stand from stationery clips or binders, as they are also called, you need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and the resulting structure should be placed on the table so that the larger clamp rests on its surface.

Similar coasters can be made from clothespins in five minutes.

Paper clips make a great option for a car stand. To make it, you need to disassemble a large clamp and slightly bend the metal parts, as shown in the photo below.

In order not to damage the surface of the phone metal mounts it is recommended to wrap with threads in several layers. We return the holders to their place, additionally secure them with adhesive tape and clerical elastic band. We attach the clamp to the ventilation louvers. The phone is securely fastened between metal parts binder.

Paper stand.

Plain office paper folded in a certain way can even support the weight of a large smartphone. To make a paper stand, you need to measure the dimensions of the phone and adjust the pattern below to fit them.

Cut the piece out of paper, fold it along the dotted lines and insert the side pieces into the slots. The good thing about this design is that it allows you to charge your phone without removing it from the cradle.

We study popular options for coasters for home comfort

Table stand under the phone for the home should be not only comfortable, but also durable, stylish and fit well into the interior of the home. Consider the options for such products.

Stand made of newspaper tubes.

This phone stand made of newspaper tubes will be a wonderful gift and a great decoration for any interior.

To weave such a stand, you will need several long dyed newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of about 1-1.5 cm and firmly fix them in the machine or in any convenient way. We put knitting needles or wire into the extreme racks, so that it is more convenient to form even and neat contours of the product. We begin to braid the base with a working tube using the "string" technique or with chintz weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

We braid a rectangular blank of the required length. We take out the knitting needles or wire. We carefully fill and cut the ends of the posts. We give the workpiece the necessary curved shape, if necessary, slightly moistening it with water.

Likewise, weave the leg of the stand on a smaller number of tubes. We bend the finished leg, install it on the main part and fix its racks between the rows of the stand. We cut off and hide the excess. We coat the product with glue, if desired, paint it additionally and cover it with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

A stand made of origami modules.

Modular origami is a fairly young, but very popular type of needlework. With its help, you can make many unusual and original gizmos, including a phone stand from modules.

To make the stand, you need two-sided paper of cyan and Pink colour... We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. It requires 28 blue modules, which must be connected together and closed in a ring. In the same way, we make out three more rows. From the fifth row, we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row, put one pink module in the middle.

In the eighth row we put 6 modules, make a pass, another 10 modules, a pass, 6 modules. The number of pink modules is 2 pieces. In the next row, on the pink area, we put three pink modules. We begin to design the curly edging of the stand, as shown in the photo below.

In the back part, we form a pattern in the form of a heart, above which we install a number of modules blue... Tighten the stand gradually until a triangular wedge forms at the back of the stand.

The module stand is ready!

What is a cell phone stand

The phone holder is not just a functional item, but also stylish accessory decorating a desktop, car or bedside table... It is indispensable for different classes of the population and in any everyday situations: for housewives in the kitchen, motorists behind the wheel, business people at work, etc. Due to the variety of types and shapes of models, you can choose the one that suits your gadget.

Materials (edit)

Manufacturers offer a wide variety of holders made from following materials:

Paper. Thanks to the colors, types of paper, original origami-style holders are obtained that will decorate the interior.
Tree. Popular, stylish solution which will highlight the desktop. The wood phone stand is convenient to use, practical, stable, durable.
Plastic. These holders are made of high-quality, impact-resistant acrylic, so they will last for several years. The variety of shapes and colors will allow you to choose a stylish accessory.
Metal. Metal holders are striking in design and style. You can order a design of any size, color, shape and choose your own design.
Ceramics. The ceramic holder won't just get dusty - it can act as a useful figurine with a smartphone holder.

Execution

To surprise users, manufacturers come up with modern design solutions:

Ring holder. Such creative solution has become a real know-how. With it, you can put the gadget on any surface and fix it on your hand by putting the ring on your finger.
Wooden coasters with a cutout for phone, tablet, charging. Sturdy wood construction will appeal to lovers of stylish things. Laconic design, separate cells for a set of items will allow you to place the accessory in the office, on the street or in another room.
For lovers nautical theme produce coasters in the form of a shell.
Fabric holders in the form of mini-ottomans, armchairs are suitable for a female audience, and also become great gift.
A pocket holder with a special hole will help you charge your smartphone. The charger plugs into the hole and outlet, and the phone can be easily stowed away in a pocket.
You can hang the cloth envelope anywhere and leave your smartphone there so as not to lose it.
Stands in the form of animals made of fabric, plastic, ceramics and other materials.
Magnetic driver holders.
The bag is convenient for those on the road. It hangs on the dashboard of the car and has several compartments: for a phone, wallet, glasses, etc.

Styles

When choosing a phone stand, do not forget to combine with the overall decor of the room. Try to pick up unique style that will match the interior design. Don't forget the functionality and sustainability that are important parameters for the holder. If you decide to make a stand yourself, then do not be afraid to experiment, because your imagination will help you create a universal object!

Your choice may be one of the following styles:

Minimalism is suitable if the interior combines simplicity of forms and the absence of complex elements.
Eclecticism. If several styles are mixed in the room, which belong to different time intervals, then choose the eclectic style. The main rule when creating is to find the connecting link. For instance, color scheme or a general architectural idea.
Modern style designed for fast-paced people. If your interior is full of straight, strict lines, simple colors(beige, gray, white, black), a lot of light, then pick up the same stand. For example, made of metal.
Classic style... This includes wooden accessories that fit perfectly into the interior with a fireplace, wood furniture, sculptures.

Kinds

Depending on the purpose, there are several types of phone stands:

On the table. The desktop holder is suitable for the desktop, highlight the status. Holders of this type are functional and reliable. Sometimes the stand is made 2 or 3 in one: for example, a smartphone, charger, watch or glasses can be easily installed into it.
Automotive. An irreplaceable thing that provides convenience and safety. They differ in fastening and type of construction. Each driver chooses the phone bracket for the car that fits his car.
For household purposes. In order not to carry the holder, which is installed on the table, buy another one - universal. He will become an assistant in the kitchen, in the nursery or even on the street.

Mobile phone stand

A wide assortment in online stores allows you to buy a phone stand suitable for your needs. You can order any model from Moscow or another city. Manufacturers do not skimp on ideas, coming up with new design themes, shapes, convenient installation methods, exclusive inscriptions (for example, an image of a company logo). On the Internet you will find photos of the original stands and choose the one that suits you.

On the table

The stylish Samdi Mobilephone Stand is made of natural wood... It will create comfort in any office and fit perfectly into your interior.

Model Name: Samdi Mobilephone Stand.
Price: 1399 rubles.
Characteristics: size: 53x116x75 mm, weight: 30 g, material: wood.
Pros: natural material, handmade, suitable for all types of phones, vertical and horizontal arrangement of the gadget, stable design, stylish uniform.
Cons: high cost.

Seebda Aluminum Foldable Phone is suitable not only for phone but also for tablet, e-book... The foldable design makes the holder compact, and the dedicated charging holes make it easy to use.

Model Name: Seebda Aluminum Foldable Phone Bracket Table Stand.
Price: 2349 rubles.
Characteristics: size: 129x84x28 mm, weight: 201 g, material: aluminum.
Pros: Foldable, durable design, stylish appearance, suitable for any device, has a charging hole, adjustable tilt angle, anti-scratch pad, rubber feet do not scratch the table, perfect as a gift.
Cons: high cost.

Automotive

Inexpensive option in the car Blast BCH-101 will help you fix your smartphone, navigator or player. It is easy to install, remove and requires no use additional tools.

Model name: Blast BCH-101.
Price: 149 rubles.
Features: Installation on ventilation grill, rotation angle: 360 °, material: plastic.
Pros: low cost, convenient installation, suitable for any phones.
Cons: not durable.

The more expensive Kenu Airbase Pro Suction Mount has stylish design and is suitable for smartphones, navigators with a diagonal of up to 6 inches.

Model Name: Kenu Airbase Pro Suction Mount.
Price: 2090 rubles.
Characteristics: size: 70x101x80 mm, weight: 72 g, material: stainless steel, plastic, panel or windshield mounting, rotation angle: 360 °.
Pros: durable material, fixation on the suction cup, shock-resistant case, sliding side clips securely hold the gadget, swivel mechanism.
Cons: no.

Universal

The Nite Ize QuikStand is compatible with any device. It is distinguished by its lightness and thinness of design, and its size is comparable to the size of a credit card.

Model name: Nite Ize QuikStand Mobile Device Stand.
Price: 616 rubles.
Characteristics: size: 86x50x2.5 mm, weight: 10 g, material: plastic.
Pros: Compact, easy to carry in a wallet or case, fits all gadgets, adjustable tilt angle.
Cons: not durable construction.

PolliMolli is distinguished by its original performance. It is made entirely of water-repellent fabric and has anti-static properties.

Model name: PolliMolli Navy.
Price: 100 rubles.
Specifications: manufacturer: Enebrain, country: Korea, material: fabric similar to natural suede.
Pros: creative design, a variety of colors, the ability to put on any surface, choose an angle of inclination, suitable for all phones, low price.
Cons: short-lived.

How to choose a phone holder

When buying, pay attention to the following points:

Material. If you need a durable structure, then it is better to choose a metal or wooden model.
Fastening method. Especially important for drivers. Think about which part of the car you prefer to set up your tripod in. In no case should it block the road or impair the view.
The size. Not all stands are designed for different models phones, so consider the size of your gadgets.
Design. Choose the right style for your office.
Price. Expensive models more durable and will serve you for a single year.
Charging hole. A handy addition won't hurt.

DIY phone stand

Using the tools at hand, you can make a stand with your own hands. Self assembly has several distinct advantages: exclusive design, saving money, developing the imagination. You can connect a child to this process, create your own collection - it will be great fun! It is not so difficult to make an accessory from household items, but it all depends on the material from which you want to build it.

From cardboard

If the apartment is lying around cardboard box, then you can quickly build a cardboard stand. Prepare your stationery glue, pencil, ruler, knife and follow the instructions:

Cut 9 10x20 cm cardboard rectangles, glue them 3 pieces each.
Draw the template for the side stands on two cardboard boxes. Make the shape the way you want it yourself.
Cut out ready-made templates sides, make a small rectangular hole in each.
Cut the third cardboard to fit your phone.
If you want to decorate your future stand, you can paste over the cardboard parts with colored paper.
Pass the third cardboard through the prepared holes in the side pieces. Your stand is ready!

With pencils

Original stand from pencils can be done in the following way:

Prepare 6 pencils (construction pencils are best), 4 rubber bands.
Connect 3 pencils with a rubber band on top.
Attach the fourth pencil to the edge, forming a triangle.
Attach the remaining pencils to the sides. You should get a three-dimensional geometric figure.

From paper clips

For the staple holder, you will need 2 staples, pliers, glue, and a plastic card. Instead of paper clips, you can use a binder:

You need to bend and unfold the paper clips so that they can hold your smartphone. Photos can be found on the Internet.
Glue the card between the paper clips. The holder is ready.

With glasses

You can also make a holder out of unnecessary glasses:

Place the glasses with the temples facing up.
The arms must be crossed so that they form a triangle with the frame.
Place your smartphone on its side, with one side on the temples and the other on the frame.

From the cassette players

You can find another purpose for old cassette players - they will make an excellent stand:

Open the box so that your gadget can be inserted into the cassette hole.
Show your imagination, decorate the cassette holder. For example, paint it with paint.

From plastic bottles

The bottle can be used to make a convenient phone charger holder:

Cut the bottom off the bottle and cut out a rectangle on the front.
The lid and plastic bezel can be discarded.
If the bottle is transparent, you can decorate it stained glass paints or ordinary watercolor.
On the other side of the bottle, carefully cut a charging hole.
Pass the wire into the neck, and the charging itself into the outlet. Put the phone in the prepared pocket.

Video

Found a mistake in the text? Select it, press Ctrl + Enter and we'll fix it!

The mobile phone has become an invariable attribute modern man... And on the road, and at home, and on the desktop, a useful gadget is assigned the main place, otherwise “suddenly someone calls, but I won't hear / see”. For convenient placement cell on the table invented the stand. You can buy them in a store, or you can make them yourself from scrap materials. Even the seemingly useless "unnecessary garbage", like cardboard packaging from dairy products or a long-used cover for a disc, will come in handy in work.

Cardboard stand

The first option is to make a mobile stand from cardboard. This is not necessarily a whole piece of material, you can take a used small volume milk bag (0.5 ml). In this case, you do not need to glue anything: you only need scissors.

The box must be thoroughly washed, crumpled and cut off the bottom. Then cut it along the folds.

The work will need a central part in the form of two rectangles. There is a fold between them. It needs to be cut and folded outside inward, pinching the fold with one hand.

Starting from the opposite end, from below, you need to cut out a shape that resembles the letter "T". It is tapered at the top, but has a beveled corner.

When the shape is expanded, the bottom edges become where the phone is located. It rests on the central face. The budget stand is ready!

CD Cover Stand

Surely everyone has a couple of DVDs lying around in their house. One of the unnecessary covers can be turned into a cell phone stand.

To do this, cut the cover in half. Then cut off all holes and rivets so that there is only an even rectangle with two folded corners at the ends.

The plate must be clamped with tweezers or pliers and dipped in boiling water. This will make the plastic soft and pliable.

Holding the plate with pliers or any other tool, it must be bent so that one of the corner ends does not reach the other a little. 2-3 cm is enough, in this space the phone will be located. One of the corners is glued to the surface. The result is an interesting and lightweight stand. The device can be placed on it both vertically and horizontally!

Paper clip stand

Paper clip cell phone stand - interesting thing which can be done in 2 minutes. To do this, you need a large, massive paper clip, which you just need to unbend correctly!

To begin with, the wire is fully straightened into a line. Then you need to clamp it and bend it again:

Fold in the form of a tick - U.
Bend both ends at an angle of 90 ° C, starting at about the middle.
Bend the ends of each end slightly.

Thus, an ordinary paper clip has become a laconic stand. The phone lies horizontally on it.

Toilet roll stand

Such good as a sleeve from a used toilet paper roll is enough in every home! Do not rush to throw away the cardboard form - it can be turned into a mobile stand in a matter of minutes.

All that is required is to properly cut off a portion of the bushing at an angle. A small piece of cardboard should remain in front to create a stop. A phone that is too tall cannot fit on such a stand, but standard size"Sits down" perfectly.

If desired, the stand can be decorated: painted, wrapped in a cloth or pasted over with paper for gifts. And no one will believe that she was once part of a toilet roll.

all work step by step

Conclusion:

When working with familiar things, it is important to give free rein to imagination: try on, think, experiment. Then stands for mobile phones will appear in the house regularly - and always different and interesting!