Mechanism for swiveling sliding door Rotor homemade. Rotary mechanism for interroom doors. Roto door: design features

Today manufacturers are able to offer customers a huge selection of interroom doors. But among this diversity there is one model that recruits more and more popular. It is a door with a rotary mechanism that can take a leading place in the apartments of most people. And all thanks to its characteristics and constructive solutions.

What is the roto-door?

So what is the rotary door? This is an interroom canvas capable of using half of the space occupied by. The design allows it to rotate around the own axis, occupying the position at the slope of the Owl and moving in the opposite direction. This type of door mechanisms makes opening simple, and the useful space is large.

In which premises are used

The use of doors with the roto-mechanism is possible in any room. But for certain residential structures, these products are a real find, and in some cases salvation. So, in small-sized apartments, a shortage of useful area is constantly experiencing. With the standard version of the interior door, people experience significant inconvenience, because it is impossible to place anything next to the entrance. And using the rotational canvas, you can expand the useful area.

Roto door is used to expand the useful area

An important role is removed by interroom mouth-doors in apartments where people with disabilities live. Due to the circumstances, such owners experience great difficulties when it is necessary to open and close the doors behind them when moving from one room to another. But if you install a rotary mechanism, the process will be much simplified significantly, and the person will be able to move freely where it wishes.

In children's bedrooms, where silence must be supported during sleep, the installation of rotary webs also plays a positive role. Thanks to the silent work of the rotor, nobody disturbs vacation.

Device and principle of operation of the mechanism

As part of a rotary door mechanism, there are:

• Swivel hinge;
• Guide;
• Steel support rod;
• Top and bottom levers;
• Magnetic lock;
• Playground with a carriage placed on it.

Inside the web is a steel rod, allowing the sash to rotate in any direction. Planks are attached to it, one of which is installed carriage. Due to this mechanism, the web is fluidly moved to different distances within the guide.

Rotary system device

The lower and top levers support the sash and are responsible for the vertical position of the door. Thus, accessories operates on the opening and closing of the face, moving the cloth in different directions, leaving it in a strict position. Adds the convenience of the presence of a special magnetic lock. It firmly fixes the sash in the closed position, making the way reliably closed.

Types of doors

Manufacturers offer for acquisition two types of roto doors:

1. Single-bed.
2. Two.

Roto doors can be with one sash or with two

At the first embodiment, only one sash is present in the opposite, on which a rotary mechanism is installed from one side or another. It will be able to open this cloth only on one wall. A two-door two doors capable of opening in any direction. At the entrance to the room, a person has the ability to use part of the block or open it completely. In this case, the door will open as a book that is familiar to most apartments and house owners.

The second indicator is the material from which the door canvas is manufactured:

• Tree;
• Glass;

There may also be a combination of different materials.

The most important indicator when choosing a material is the weight. The easier the canvas, the longer the roto-mechanism will last. The optimal option is the light doors made from the composite.

Advantages and disadvantages

Like any products, interior canvases with a rotary mechanism have its advantages and cons. Among the advantages should be allocated:

• Fixation of the canvas with a magnetic lock;
• Saving free space of residential premises;
• Ease of use for any person, including those who have limited opportunities;
• The entrance side can be any, which means the possibility of opening the sash in both directions;
• Silent;
• Hermetic closure of the canvas.

The fixation of the sash and tightness in the closed position allows you to use such interior items not only as decor, but also create beautiful lounges with their help. The rotary door opening system is a real find for people with disabilities. By virtue of circumstances, they are not always able to cope with the usual web, since it is too big to move the movement radius. But when using a rotary mechanism, the problem of independent movement from one room to another disappears, since the sash can be opened in any direction and with a smaller amplitude.

Folds Roto doors open in any direction

Among the large number of positive points should also be indicated on the negative aspects of the issue. Namely:

• Less durability;
• Using only lung sash;
• The width of the day must be at least 80 cm.

A large number of small elements that are part of the rotary mechanism are rapidly increasing compared to conventional loops.. In addition, the device can withstand limited weight. If it is exceeded, the mechanical wear will become incredibly fast and the rotor will not be able to perform its functions.

Installation

Any homemade master when buying rotary doors will be interested in the possibility of installing with your own hands. And such blocks can be put independently subject to the presence of a tool and a clear action according to the instructions.

Preparatory work on the doorway

Before installing the door block with a rotary mechanism, it is necessary to prepare a discount for future installation. The peculiarity of this operation is that all planes must be strictly vertical, and the width of the passage does not deviate more than 5 mm. If the doorway does not match the desired indicators, it is necessary to carry out its reconstruction.

Door opening must be adjusted by level

The correctness of the preparation is constantly regulated by the construction level and roulette. Ideally, it is necessary to achieve a clear rectangle having angles of 90 degrees. In this case, the installation will be easily, and the quality of the work performed will be as high as possible.

Mounting order

When the output is fully prepared for receiving a rotary door, you can start installing the unit. To do this, you need to cut off the guide exactly by the size of the top bar of the box. This element has a mark showing how to decrease the size from which side.

Assembling a guide

After assembly, the mechanism must be lubricated.

Lubrication mechanism

Next, you need to drill holes for screws. When they are ready, you can fix the guide on the door frame. The unit itself is installed using special mounting slats. They are set strictly by level, repeating the rectangular punishment. This will make it possible to accurately put the box, observing the perfect vertical.

Fastening a guide

When the installation process is completed, the block is firmly fixed and move to the doorway.

Canopy web

In the sash you need to insert a steel support rod and attach the planks and levers to it. Everything must be fixed with self-drawers so that the details did not have free stroke except the guides.

Installation of platbands and lining

Adjustment

This is an equally important process than block installation. For convenience, the mechanism has several tuning bolts that will allow you to set the cloth in all directions. The task of adjustment to achieve the perfect door to the door.

The door must have the same gaps from all sides.

It must have the same gaps along the entire length, as well as from the top bar of the box and floor. If the canvas could not be adjusted immediately, the reason for this could be the wrong installation of the structure. In this case, there are two options:

1. Re-install the door block.
2. Find the middle position of the canvas.

The first option is rarely used, so you should use an affordable adjustment to find the golden middle.

Sections Articles:

Lack of free space is one of the problems of small residential premises. To save space in an apartment or house, a roto door was developed. Innovative technology in such a design can be considered a rotary-retractable mechanism. According to the functional abilities, the novelty in the world of doors is much superior to their predecessors.

Constructive features

The system is a hybrid of folding, swing and pendulum door structures. Its work is based on a retractable rotational mechanism. It radically changes the position of the sash during its opening and closing.

The door is made of two main nodes:

• Guide block;
• Lever system.

These nodes include the following items:

• Guide;
• Top lever;
• Top plank with carriage;
• Reference rod;
• Lower plank;
• Lower lever.

Rotary mechanism device

In the door frame, the upper part of it, the guide is installed with the grooves. To facilitate the rotation of the door leaf, it is equipped with a special swivel hinge, which moves with the roller. The hinge assembly also provides a smooth movement along the guide door.

The upper part of the structure using a vertical rod binds to the lower lever, which is embedded in the door leaf. The axis of rotation serves as the connector between the upper and lower node. Such a lever construction allows you to fix the roto door strictly vertically at any position while driving.

Principle of operation

The built-in mechanism creates a special trajectory, which moves the door leaf. At this time, two processes occur at the same time:

• Opening;
• Moving to the side.

When opened, the mechanism shifts the door to the side, turning the sash around its axis. Rotary movement, laid in the principle of operation and gave the name for a new type of roto doors. In addition to such a feature, such doors can open in two opposite directions: both forward and forth.

Free movement provides a special hinge. It works along with the roller connected to it. The hinge assembly is included in the groove and moves along the top guide plate. Due to which there is a silent discovery and smooth movement of the door canvase.

Types of doors

Class doors across multiple indicators. Consider possible categories.

The first indicator is the material from which they are manufactured by the door system. Use:

• Tree;
• Glass;

Combinations from several materials can also be used.

The determining indicator in the selection of the material is the weight of the door canvase. The easier it will be a sash, the longer the rotary mechanism will last. The optimal option will be the doors made of composite materials.

Decoration can be diverse, it provides for a large number of options. A variety of textures and colors with the right selection of style will suit any very exquisite interior.

The dimensions of the doors are complied with generally accepted standards. The width of the sash can be made in the range of 40-90 cm, and the height is always equal to 210 cm. According to the design, the canvases used can be single and bivalves. The selection depends on the requirements for functionality.

Door systems are performed in a mechanical and automatic version. The cost will depend on the control mechanism. In the second version it will be significantly higher.

Benefits

The use of rotary doors is associated with a large number of advantages. The very first of them is a significant savings of space. For the standard swing door, you will need a place equal to the width of the door. At the same time, the space is necessary for the opening for the semicircle, which the canvas describes.

In the case of Roto, you will need a significantly less place. Opening dimensions will decrease more than twice. It is very convenient to use such a mechanism in narrow corridors of small-sized apartments.

In addition, operation is associated with a number of other benefits.

Functionality. Opening can be carried out in mutually opposite directions. Therefore, when choosing does not matter, left door or right. Reliable fixation of the canvas in a closed position, which provides a high-quality magnetic lock.

Easy installation. The design comes in a complete assembly, which significantly reduces and facilitates installation.

Long service life. The system is designed in such a way that excludes the fields of the web after the expiration of time.

The design of the doors of the door is universal and with ease will fit into any, the most narrow space.

disadvantages

High-quality innovative design requires large investments. Interroom doors are made on special installations. Hence the high cost of products. This is the most significant drawback.

It should also be noted limited by weight of the canvas. If you prefer massive materials, in this case the Roto mechanism cannot be used for heavy doors. The canvas having a lot of weight will quickly lead your design into disrepair.

Installation

You can always use the services of installers that will perform quick installation. But in order to save Roto, the door can be installed with your own hands. Any equipment is supplied with detailed installation instructions. The main thing is to adhere to the work of a certain sequence.

Installation can be divided into several stages:

• Verification of completeness;
• Preparatory work on the doorway;
• Installation;
• Adjustment.

Each stage has its own characteristics that need to be considered throughout the work. Consider the order of work.

Check completeness

In order to properly install, you need to make sure that all components are full. This includes:

• Door canvas with an elevated lock and mounting holes;
• Box with built-in guide mechanism;
• Telescopic platbands;
• Sealer.

The door design is supplied with high-quality accessories, which is distinguished by durability and durability. The kit includes a mounting set with a hex adjustable key. After checking the configuration, you can proceed to the next step.

Preparatory work on the doorway

This is a very responsible stage, because to install the door box, accurate compliance is required. Therefore, the following requirements are presented to the quality of the opening of the opening:

The gap between the box and the simplest must be minimal. It should be laid in the deflection parameter - 5 mm. Sleeping around the perimeter should have the same size. The end planes of the opening must be aligned so that they strictly correspond to the horizontal and vertical level.

In cases of installation of ordinary doors, the deviation can vary within 30 mm. And the discrepancy along the entire length can fix the mounting foam.

If standard doors are installed at the end of the repair work, in the case of the roto door, it is necessary to worry about the opening necessary in advance. It must be performed according to the size and requirements for them, and the ends are prepared for installation. Otherwise, the installation will arise great difficulties.

Mounting order

Before starting the assembly, it is necessary to adjust the length of the guide strip. It is cut only on one side. The plane of the cut is indicated by the manufacturer as a guide arrow. After that, you can proceed to basic work.

They are performed in such a sequence:

Strictly perpendicularly combined vertical and horizontal parts of the box, guide covers must also cut into the specified places, according to the necessary dimensions.

In the work prepared on the necessary sizes, the box is inserted and the box is fixed using wooden struts. The resulting cavity is filled with mounting foam, after it is complete, the struts are removed. The remaining after the spacer empty places also blend by mounting foam and after its solidification can be started to install the web.

The door flap is inserted into the guide bar and fixed in the built-in accessory. If necessary, the discharge is complemented by goodwood, which is governed by the width of the box. The last stage of installation is the installation and fixation of the platbands. It is possible to see the door in more detail how the door is installed in the video presented.

Adjustment

After complete assembly, it is necessary to carry out work on adjusting the position of the canvas. This condition is mandatory for the functioning of the system.

To do this, you will need a level with which you can adjust the verticality of the web. For these purposes, an adjusting screw with a retainer is located at the top of the mechanism. Its rotation can be performed by a special hex key, which enters the repair kit. Turning the screw must be fixed the roto door in a strictly vertical position.

After performing the adjustment work, the performance of the entire design is checked. The door must freely open, move smoothly and closed tightly. All rubbing surfaces need to be lubricated. In order for a high-quality design, it is necessary to show accuracy and attentiveness in the process of the entire assembly.

What design is preferable from the point of view of space saving?

Objectively - sliding, but often the planning solution suggests the choice of rotational scheme. Continue comparison. Ease of use.

To bring a sliding door to move, it is required to make a small force, but in the unusual direction, therefore the opening-closing process sometimes seems inconvenient and long.

The roto-door opens very easily, and in any direction - on itself and on itself, and in the closed position is fixed with a magnetic string. She can put the highest score on ergonomics. The ability to choose a web. You can equip the mechanism of the roller suspension to be almost any canvas.

It is desirable only that there is no protruding decor on it, requiring an increase in the retreat from the wall and make it difficult to install seals. There are special sets for all-glass doors on sale.

The roto-mechanism will be able to attach only to the wooden parts of the strapping. Solid (back to the top) inserts from glass and thin layer materials do not allow it to be installed.

The canvas of the mouth-doors slides a lobby, to a jamb, along the guide rail, mounted in the upper beam box. At the same time, the sash rotates 180 ° around the median vertical axis. The mechanism provides easy opening in both directions.

Soundproofing Roto Doors

For light slide of the canvas as sliding and rotary doors, a small gap is needed around the perimeter of the canvas, so in terms of insulation of sounds and odors, they are inferior to swing models.

Partly corrected the situation helps mortise brush seals, thanks to which structures with non-standard opening isolate air noise with a level of force 20-25 dB in middle frequencies (calm speech).

The type of canvas is of great importance: the deaf gives the gain in sound insulation of about 2 dB compared to glazed (a glass of 4-5 mm thick).

The complexity of the installation of the doors roto.

The roller suspension mechanisms have long been popular, and their nuances of their installation are well acquainted by installers of specialized firms. In principle, the task is able to cope and the home master. The design forgives small flaws in the preparation of the day, but subsequently often needs to be adjusted.

Installation of the roto-door can only be entrusted with experienced professionals who thoroughly studied all the features of the system. Mandatory requirement is the correct geometry of the projection (equal diagonal).

Cost of roto doors.

The mechanism of the roto-door is more difficult, and it is harder to mount it, so this design will cost about 30% more expensive than sliding.

Opinion of a specialist:

Interior rock-doors appeared in everyday life, but have already gained wide popularity as an excellent solution for small-sized apartments. Traditional swing structures create inconvenience in narrow corridors and cramped halls, and the door canvases on the Roto-Sis-theme save precious centimeters and allow you to organize space rationally. In addition, the rotor doors help solve the problem of lack of space for opening the sash at closely arranged penetrations. The mechanism eliminates collision and damage to the canvas. It is also important to note that, thanks to the original opening scheme, the roto-model will become a significant element of the interior.

100 pieces Miscellaneous Auto Fasteners Car Bumper Clips Fixator Rivets ...

49.68 rub.

Free shipping

★★ ★★ ★★ ★★ ★★ (4.60) | Orders (946)

Xiaomi Smart House Mijia Kit Gateway Door Human Window Means ...

Fashion capricious and so variable. Yesterday, everyone believed that the best solution than the standard swing door was not found. And today, the attention of buyers is offered Roto door, combining stylishness and practicality.

In fact, the door of the door is a compromise sliding and swinging systems. This is a unique patented mechanism that has no analogues.

The name of this door system itself seems to think that such a design is equipped with something rotating, dynamic. But with a rotary mechanism, this door has nothing to do, except that combines their rotary-sliding mechanism (without it, the design simply cannot function).

With the type of doors of this type, no difference from swing structures. Differences are clearly becoming visible only when opening the sash. When opening the roto door, the mechanism shifts the cloth to the side, at the same time there is a turn of the sash around its axis. Like pendulum systems, doors having a rotary mechanism can spark in any direction. At the same time, the sash moves smoothly, easily and silently.

It is worth paying attention to the fact that the rotary-sliding mechanism is designed for structures of standard sizes (the width of the web is 40-90 cm, and the height is 210 cm).

It consists of the following elements:

• lower and top levers;
• bushings;
• special mounting corners;
• sealer;
• locking mechanism;
• guide;
• rod.

In addition, to assemble the system and its installation with their own hands were quick and efficiently, a mounting kit is present in the configuration, in which there is a special tool - the hex key.

Moreover, special accessories, characterized by durability and mechanical strength, are used for the doors. Such design elements, like door handles, are installed on the sash at the product manufacturing phase. Therefore, if the installation of the door is carried out with your own hands, the home master does not have to break his head in guess, how to fix the handle on the canvas.

Varieties of doors

All represented by the buyer of the buyer of the Roto doors by type of management can be conditionally divided into the following two groups:

• automatic systems;
• mechanical structures.

Naturally, the cost of the first is significantly higher than the price of the second. But this is not surprising, because the high-tech product, which is distinguished by excellent quality, cannot be cheap. As you know, the quality and reliability of the product always have to pay more.

As for the material used in the manufacture of the doors, it can be the most diverse:

• array of wood;
• plexiglas;
• polyvinyl chloride, etc.

And besides, the door systems are presented in a rich color scheme, so it's not much difficult to choose a suitable solution for any interior. Yes, and design design may be the most diverse. If desired, this product can be made under the order: on your sketches and sizes.

Installation of the door system

Of course, ideally, the installation of the doors should be carried out by installers-professionals. But, as you know, the door mechanism of this type is worth a lot, and if you also resort to the services of installers, you will have to seriously fork out (naturally, it is not for everyone for pocket).

It is for this reason that the homemade master can, by taking courage, perform the installation of the design with their own hands. However, such an installation is not such a difficult job, especially since each model is equipped with a detailed instruction containing instructions on the installation of this system.

The same installation of the door block is presented with its own hands:

1. Prepared mechanism and sash.
2. Installation of the guide.
3. The installation of the sash is performed.
4. The installation of gooders is made.
5. Adjustable canvas.
6. The design is checked.

At each stage of work, you need to be extremely attentive and neat. Then the installation of the door system is carried out in the best possible way.

Minuses and advantages of the doors

In general, the Roto mechanism has a complete complete set, so the installation of such a door system (even if the home master is inexperienced) is performed quickly and with ease. In other words, there will be no special skills to fulfill such work.

But the fact that the door mechanism is established quite simply is not the only advantage of the doors. The fact is that these designs are presented on the modern market in a wide range (different material, design, color variation, etc.), so the buyer does not experience problems with the choice of the desired model.

Moreover, the distinctive feature of the door blocks of this type is universality: the sash can open either in one or the other side. At the same time, the canvas in the open position does not occupy a lot of free space.

In addition, the mechanism set on the design (it is based on a magnetic lock) provides a dense adjoining of the canvas to the box. Due to this, the design has excellent heat and sound insulation properties. Yes, and the sash will not open from the draft and will not hit the next baby or pet.

And yet, the roto design is the perfect option for small rooms or uncomfortable narrow corridors or passes. At the same time, they do not sane over time and for a long time retain their valuable properties.

Along with such a variety of advantages, there is also a "fiction spoon". The essential minus of such door systems is considered their high cost. However, such costs are nothing compared to the practical and magnificent design that will decorate the entrance to the room.

On the standard question, what doors for home are better, most people do not think they will answer that it is sliding, as they are largely able to save the useful area of \u200b\u200bthe premises. Only some familiar with the innovations of the modern market will answer this question otherwise, they will put forward the so-called Roto door to the fore, which in all its parameters and operational characteristics at times exceeds all its relatives. At least, this developers say that if it really will actually have to understand this article, in which, along with the site, we will study the design of the roto doors, advantages and disadvantages, as well as its installation technology.

Roto door photo

Roto door: design features

By and large, the Roto door can be safely called a hybridom, which combined not only the principle of operation of sliding, swing and, but, but all their advantages, practically no placement for flaws. The culprit of such an alliance is a special mechanism that sets the unique trajectory of the door movement in the course of its work - it is at the same time and moves to the side, and swinging, while doing the rotational movement, from where its name has come. Such doors can operate in two directions - if you conduct analogies, it can open, both on yourself and from ourselves, with no one to occupy a useful area.

As you already understood, the entire secret of such doors is in a unique rotary-sliding roto mechanism for doors, which constructively consists of two parts. A guide with a groove that is installed at the top, a swivel hinge with a roller, which provides both easy-to-rotate the door and its movement along the top guide. The bottom of the door leaf is mounted a special lever associated with the top mechanism of the axis of rotation, which is built into one of the door frame racks - due to this lever, a fixed position of the web in space is ensured. Simply put, this lever holds the canvas in a strictly vertical position, despite its position in the doorway.

Roto mechanism for doors photo

Yes, the mechanism is complicated, which entails no less difficult installation technology - in order to facilitate this process to install this process, the interior doors are supplied assembled. In fact, it remains only to install them in the doorway. That, on the one hand, is an indisputable advantage - by the way, such positive moments have a lot of doors. Talk about them a little more.

Advantages and disadvantages of rotary-sliding doors

The advantages with which the roto door possesses is quite a lot - it is easier to list their shortcomings than we will take it from the very beginning. In addition, the disadvantages of the product is much easier to determine their actual value. To the negative moments of such doors, one can take three main points.

As you can see, there are no cons of these doors, even if we consider their operational characteristics. If we talk about the merits, then there is a lot of advantages here. We will get acquainted with the main ones.

1. The most important thing is their dignity - this is versatility. They perfectly showed themselves both in extensive and in small-sized premises. In the open state, they protrude from the doorway less than half of its width - in the case of a 600mm cloth, this dimension is only 260mm. Even if the corridor has a width of only 80cm, such doors will not give any inconvenience. In addition, they open in any direction - both on themselves and from themselves. These doors are neither left or right.
2. Simple installation of the door of the door, accessible to independent exercise - as mentioned above, they are supplied in a fully assembled form, and the master remains only to fix it in the doorway. We will talk about it in more detail a little later.

In addition to these two main advantages, such moments can be distinguished as high heat and, which is provided with special brush type. Ease of use (such doors are recommended for use in rooms, where people with disabilities live) and, of course, an unusual way to open, which may seem in many people to many familiar familiar.

Make sure in all the benefits described above, you can watch this video clip, which also shows the technology of assembling such doors.

Installation of interroom doors: subtlety and nuances

As can be seen from the video, the process of assembling the doors is a rather complicated process, which is shown here in detail, and a competent person to reproduce it independently, in principle, possibly. Moreover, such products in most cases comes in the form of finished elements and is complemented by detailed instructions - it will be easy to assemble. It is much more difficult and more important to withstand some nuances, which will be discussed further. Special attention should be paid to the formation, and it is necessary to do this at the stage of repair - it should be understood that such high-tech doors are mounted at the final stage of repair. When all other works are already executed.

The following requirements are put forward for such doors for such doors.

These requirements entail one need. If the standard door purchase is carried out at the end of the repair, then the doors of this type are better acquired in advance so that in accordance with them it was possible to form the opening. Alternatively, you can simply get the assembly drawing that contains all the necessary dimensions. Again, this is not a very good way out, as already having the mouth of the door, around them can be forming the rest of the rest interior.

In general, summing up, you can only say one thing - the question of how to install the door of the door, on the one hand, it is simply solved, and on the other not very. In all of their complex mechanism, the assembly of which is better to entrust the professional - you can only prepare the opening. In principle, if the acquired Roto door is ready for installation, it is also not difficult to mount it yourself.