Hall from furniture shields with their own hands. How to make a hallway with your own hands. From additional tools you will need

Rarely meet in the urban apartment a large hallway of the right form. Most often it is a small room or a long corridor, where no more than two people can fit. But the hallway is the first to see people entering the house. In addition, it should also be functional, as the top clothes and shoes are stored here on all seasons.

Starting the repair of an entrance hall, it is worth remembering that there are few rooms with an equally aggressive environment. It is the hallway that assumes all possible non-jodges knitted with constant mud, which is entered from the street.

Secrets of design on visual expansion

But even the smallest room can be made stylish and convenient, with the help of some design solutions. They will help to implement almost any fantasy, turning the cons of the room in dignity. Consider a few secrets on a visual increase in the room:

Tip! If you send the light on the ceiling, it will give the height effect, the direction of light on the narrow walls will expand the room.

Varieties of halls

Square.
Corridor.
Coupe.
Corner.
With branches.

Hallway square It is a small room, most often with one solid wall, on the other, there are doors to other rooms and a bathroom. In such a room there are no other options for the placement of furniture, only along a solid wall. Light color gamut will help to expand such an entrance hall, a game with light and installation of doors and arches. For example, doors to the bathroom should not be allocated, let them be the same color as the walls. In rooms you can install doors with color stained glass windows, mirrors or transparent. In such premises, like a kitchen or hall, you can make arched loops.

Hallway-corridor Usually, very narrow. Furniture in it can only be installed along one wall. A narrow and usually long hallway is desirable to always divide on some zones using an archer or color palette. Separately, select the place under the hangers for the outerwear, separate the front door, organize a zone for mirrors. Thanks to this techniques, you can optimize the space of the hallway. Near the input door, the tiled floor will be the ideal option, and then you can be displayed with another material, for example, a linoleum or laminate, laying it across the room. Longitudinal walls should be made of light colors, and ending darker. And the main thing is the mirror, they will help to expand a narrow room if you hang them on long walls.

The hallway-compartment, it is either a square room with a corridor separating from it, or in the form of a winding corridor, or several square corridors diverging in different rooms. In such a room, it is not easy to accommodate the necessary furniture, it is worth sharing a hallway to the zones.

Angle parishion It consists mainly of one corner and passes immediately to another room. It can be separated by the zoning of the floor and the ceiling or light. You can also install a septum, preferably from light translucent materials.

Hall with branches, Typically, a square room with several corridors from it in different directions or a branching corridor. The main furniture is installed near the entrance door, decorating the branch to their taste.

Tip! Visually to increase the hallway will help the floor covering, the same as, for example, in the kitchen of the separated arch.

Finishing a small hallway

Make a design of a small hallway with your own hands is quite simple. The main thing is to initially need to determine how much the repairs are calculated. But it is not necessary to save much if I want the original room that reveals the character of the owner. Given the design secrets, on a visual increase in the hallway, you can make a choice of finishing materials for the room.

Wall decoration

Choosing a finishing material for walls in the hallway, it must be borne in mind that this is not only the dirtiest room in the house, but also the place where dimensional things are still stored. For example, a stroller or bike. Gathering in the morning, households, often face each other and wipe the walls. From this entrance hall is the most frequently retractable room.

Wallpaper for hallway must be washing or moisture-resistant. If there is a big choice on the market, it will not be a big problem. Picking out the wallpaper, it is worth thinking about their colors. For small rooms choose bright shades with a small pattern. It must be remembered that the vertical pattern will make the room above, and the horizontal drawing will expand it. Wallpapers can be combined with other materials such as wooden panels or. If the ceilings are high, you can split the finish, on the bottom of the panel, and the wallpaper is placed on top. The correct inserts of stone or mirrors will help not only decorate the hallway, but also visually expand it.

Plastic panels are very comfortable in care, they are not afraid of moisture and move the temperature differences well. The choice of invoice and color is very large and can be chosen for every taste. But inadvertently knocking on a sharp heel or an angle, you can damage them.

Wood panels are more durable and taking into account modern technologies, there will be no problems with their choice. The main thing is to acquire resistant to humidity, otherwise it will be necessary to spend money on a special impregnation or varnish for their processing.

The tiles of large and small sizes will look cold in the hallway, but it is worth diluting it with other finishing materials and it will help to visually expand the room. If this is a mirror tile, then it will be in the theme on the wide walls, making the room much more.

Stone as natural and decorative, should not completely cover the walls. It can be the original finish of door openings or angles, with high ceilings a stone can be chosen the lower half of the walls.

Stucco or painting of walls in the hallway is the cheapest way to finish. A variety of plaster and paint, they will help create their own unique design.

Choose flooring

To the floor in the hallway, too, should be attentive, due to the constant dirt and lovers of heels-stud.

Tip! Floor covers in the hallway can be combined. It looks very impressive and stylish, and besides, visually expand the room.

Tile or porcelain stoneware are considered the most durable flooring. They are easy to wash and they withstand heavy loads. It is better to choose a tile with a roughness so that there is no slip.

Linoleum is wide in the choice of colors, just to care for him, he is not afraid of moisture. Choosing linoleum needs to be clarified to be for premises with high patency.

The wooden floor is rarity for the hallway as it quickly absorbs moisture and it is easy to scratch it. If you wish, you can additionally process it, but it will take more time.

The laminate will well replace the tree, it is moisture-resistant and it is difficult to damage it. Laminate is considered the most popular flooring for the hallway.

Ceiling in the hallway

The main thing for the ceiling in a small hallway, not to be too voluminous. There are no multi-level ceilings. Well if they are with a reflective effect. Also, you should not hang in the hallway chandeliers, point lamps and flat plaffers, suit here more.

Stretch ceiling is a good option for the hallway. You can mount the backlight, and it is easy to handle.
Painting or whitewashes, the most profitable option in terms of finance. The ceiling does not require care and it is easy to update or repain, if you want another color.
Panels are a good choice for the ceiling of the hallway, but do not forget that if the ceilings are low, the panels will steal several centimeters and the ceiling will be even lower.

Conclusion

Even if the hallway is small in size, it is not a reason to be upset. Knowing the secrets of the visual expansion of space, it is quite simple to create an individual design of a small hallway with their own hands, which will delight for many years and owners, and their guests.

Interesting material is a tree. It is used as a building material, or for finishing purposes. It is popular for another long time.

Wooden products are diverse and possess a lot of positive characteristics, including:

Long term, this is subject to constant and proper care;
Ecology, such material is capable of optimally affecting human health, his well-being;
It looks aesthetically beautifully on not dependence on the style, or the design of the room. Thanks to such furniture, a pleasant impression of its owners is automatically created;
Versatility, the tree will work perfectly in any room, not depending on its humidity;

Practicality. Even waste of such material is used to make various materials, for example, a chipboard produce. It serves in the future in the manufacture of furniture.

It is also convenient that when painting wood is not published, there is just a paint coatings on it.

Hall from a tree

This part of the house is the home business card. From the appearance of such a premises, you can judge the purity and social status of people.

Now all the large revolutions are gaining the use of wooden materials, so the hallway from the natural tree is especially popular.

When choosing exactly this option for its housing, you need to consider different types of material, their prices and quality:

The cheapest material is pine. This is soft, not quite resistant to mechanical damage to wood. It will not last as long as I would like. The advantage of such a material is resistance to infection processes.

Strong, reliable material that will last long enough, the oak is considered. Thanks to its beautiful structure, it will fit perfectly in any interior. This is one of the most running goods in this area.

Note! Interesting are, it can be seen in the photo of the hallway from the tree, wooden homemade elements. Such art will make the subject of furniture not only practical, functional, but also a beautiful accessory adorning any entrance hall.

Hall from a tree under ancient

Wood can be combined with any materials, textures of other style directions. Only high - tech, which uses metal elements is not able to harmoniously interact with such material. But, this is just one exception.

A piece of wood in the hands of the wizard, you can turn into a whole art. So, the furniture for the hallway from the tree is decorated with threads, in different ways decorated. For a time, such products will not damage, since they are made of natural material.

Narrow halls

Depending on how the dimensions of the room you possess, it is worth choosing furniture, style, lighting.

It is worth choosing high-quality materials so that they will serve for a long time in no dependence on external factors.

Do not choose too cheap furniture, because the hallway in the corridor should look decent.

An practical and universal decision when choosing a melie is the blatic from the tree to the hallway. It can be used not only in practical purposes, that is, exclusively to store shoes, and the means for its departure.

Choose such on which you can also sit so that, for example, it was convenient to go.

Also, an unlucky role is played by the key to the hallway from the tree. Thanks to this material it will last long, and your keys will hang on a beautiful product.

If we talk about color, then the choice is huge. Classic black, white coloring, also popular preservation of a natural wooden image. The furniture from the array is expensive, but it is natural.

Styles

Country is an unusual style that is characterized by rustic motifs and homely comfort. Modern apartments are increasingly using it.

It is the hollow forms that are the highlight that attracts attention. Perhaps such a style and you will like.

conclusions

In wooden materials there are many advantages, among them and durability, practicality and natural, genuine beauty.

The main thing in the choice is the maximum compactness of your hallway, good lighting and, of course, style design. In the latter, focus on your own sensations and taste.

Stock Foto Hallway from wood

Sometimes the assortment in the stores is striking by its monotony. Many apartment owners know that it is very difficult to choose furniture in the hallway. If the room is small, then the cabinets are simply not placed or filled with everything free space. But the owners of spacious vestives fall into a difficult situation - the presented models do not always meet the demands of the owners and often look ridiculous in a large room.

If you cannot choose a suitable cabinet, then do not beware and think about creating perfect furniture for the hallway with your own hands. Such an approach will save money, as well as get a model that suits you in all its parameters.

Can it cope with such a task a beginner "home master"? Yes, the desire and availability of all necessary tools and materials will lead you to a positive result. Of course, inexperienced masters it is better to stay on the simplest models. But those who are already far from the first time making furniture can create a real work of art.

To make it easier for you to deal with difficult work, we have prepared special instructions, drawings and schemes.

How to make a hallway do it yourself?

To begin with, you should decide on the model and sizes. If we are talking about a tiny room, then you should not overload it with furniture - use the standard entrance hall with a small compartment for the outerwear, shoes and necessary things.

A spacious hallway can be placed a spacious wardrobe. If the area allows, then such a closet will easily turn into a real - the dream of each woman. The cost of implementing such a complex project increases in proportion to the size and filling of the cabinet.

You can also consider the option that will be a compromise between the capacity and appearance. So, the angular halls visually look much less. But at the same time the high depth allows you to place inside a lot of things.

Choosing a suitable model, you can start withdrawing the measurement and preparation of calculations. Also be sure that you have all the tools that the wizards enjoy.

Necessary materials and tools

Prepare in advance:

saw or electrolovka,
screwdriver
emery paper
construction knife,
furniture screws,
roulette
corners
loops.

You will also need material for the manufacture of a hallway. We recommend to give you preference to the furniture shieldBecause it is made of natural components without using synthetic resins. Such a shield is completely safe for the health of people living in the house. However, this material has a high cost.

More popular with popularity common Ledp.. It includes fastening resins that can negatively affect the tenants of the house if the edges of the laminated plate will not be closed by edges. But at the same time, the material has a relatively low price and excellent characteristics (it is easy to operate with it).

Standard entrance hall with your own hands: instructions, schemes and drawings

To make such a simple hallway, you will need the following materials.:

loops - 12 pcs,
furniture shields - 7 pcs (dimensions 1600x400x18 mm),
plywood segment 6 mm,
bounded boards - 2 pcs (dimensions 2000x240x18 mm),
furniture handles - 6 pcs,
three-dimensional rack - 1 pc (3000x40x12 dimensions).

We recommend you start with Penala. Its dimensions are 2000x400x400 mm. The corresponding planks, as well as the upper lid at the calculation of the "Vansel", are peeling out of the furniture. Also two shelves will be required. The assembly is quite simple. The planks are located in parallel and fasten in the lid with the help of self-tapping screws, the shelves are also installed. For strength in the corners, the frame is fixed by corners drank from plywood.

Since two doors located in each other are much easier than one, then this option is preferable. From the shield you need to cut two identical doors and several internal shelves (optional). Secure the doors on the loop. You can do and two per door, but for reliability and proper weight distribution, we recommend using three.

The dimensions of one tube constitute 400x400x820, and the other - 820x400x490 mm. You can refuse any of them without prejudice to the design as a whole.

To collect the first tumb You will need 2 identical sidewalls and an inner regiment, which will close the design below. The upper part of the future stands is strongly narrowed, so the lid should be noticeably less than the main part. All elements are fastened with self-draws. If you wish, you can use furniture wanks. Do not forget to drill holes in advance and use glue.

The door is cut from the shield for the bedside table, it must be fixed on two hinges. But for the drawer, it is necessary for a slide. We recommend that you purchase the necessary items in a specialized store. You can make them yourself from plywood, but in this case the box will be pulled out, and not roll out, which will complicate its use.

Make the second tumba very simple. You need only two sidewalls and 2 internal shelves that form a frame. Internal filling of this tube can be completely any. All items are attached to the self-tapping screws or the sewage.

After that you need to collect the hallway. All items secure each other, and then prepare the boards. They should be beautifully located from the edge of the foam to the edge of the cabinet, creating the basis for the hanger. Constore the same step, attaching the boards to the possession of the bedside tables. So that in the top of the design is also durable, secure the boards to the rail. Place it at such an altitude so that you can later attach to the rake hooks for outerwear. If you wish, you can supplement the design shelf for hats.

Do not forget to open the hallmarks with varnish, attach the handles and hooks.

Wardrobe Hoodie: Instruction, Schemes and Drawings

Make a lot easier than it may seem. But to begin with, it should be declared the exact value of this term. The "wardrobe" suggests a special design of the doors that move around the cabinets along the cabinet case. It can be both built-in and standing separately.

If desired, you you can make a cabinet case of drywall And thus hide it in a fake wall. But we will look at the classic scheme for making a wardrobe with side walls.

This model with dimensions 2020x625x2320 consists of several main parts.

Side racks must be a height of 2288x625 mm (the thickness of the top and bottom sheets is taken into account in these calculations - 32mm).
Also large details are the lower and upper strips: 2020x625 mm.
Middle vertical racks are inextricably linked with a rod for clothing. As a rule, it is attached at an altitude of 1900 mm, so the standard size for them is the height of 1900 mm, the width is 525 mm. The remaining 100 mm is a stock for the normal functioning of sliding doors.

The filling of the cabinet can be any. It all depends on your desires and preferences, but remember that inside there should be a stock for the placement of fasteners.

All items are best booking in a joinery workshop. To cut the elements of the desired form at home will not always be able to even an experienced master.

After that, you can seize. For installation, we recommend using not only screws and ducks, but also furniture corners. Rails are installed inside the cabinet on a specially designated area (those 100mm, which we left during the workpiece of parts). After that, you can put the door and use the cabinet.

Corner hallway with your own hands: instructions, schemes and drawings

The problem arising when creating an angular hallway is that careful calculations are required, the slightest error can cost a whole sheet of material. First you need to remove the measurements and check the walls. If the surface of the wall is a curve, then without a common frame can not do. Otherwise, the walls themselves can serve as the basis for which the shelves can be fastened. The second option is more economical and easier, but we will look at a separate cabinet, because perfectly smooth walls are a rarity.

Choose a suitable drawingBased on the size of the room, the length of the walls and proximity of the doorways. Treat the inner equipment of the cabinet. According to the selected sizes, make six basic hull elements:

lower and top planks,
rear walls (2 pcs),
side walls (you can do without them, but the functionality of the cabinet will decrease).

As soon as they collect the frame, you can start installing internal shelves, baskets and drawers, as well as hooks and rods.

The angular hallway can be equipped with doors on the rollers, turning the structure in the corner compartment. But budget dispensers will look good.

How to make a hallway do it yourself: video

The hallway creates the first impression of the interior of the house, should have a beautiful design, be comfortable. It accommodates furniture of various purposes: closet under clothes, mirror, bedside table, hanger, chest of drawers. It is also nice to put furniture for seating: a bench, the chair will complement the design. So, the hallway allows you to choose any design as in the photo that the owner of the house wishes.

When creating an entrance hall, you can use drawings, diagrams, photos that can be found on the Internet or create your drawings. Create furniture will be easier if you use drawings. The design of the hallway takes not the last place in the interior of the whole house. It will be good to look at the Furniture Furniture Photo. Supplement wooden floors or laminate design.

Any of the elements of the hallway can be created with their own hands.

One sash

Production Stages:

work begins with the preparation of the canvas with dimensions of 1700x400x18. Marking is applied to it, the side part is cut. The next element is the shelf, the bottom. Next, we work on the front side, which is attached under the bottom of the photo;
when everything is ready, the holes are cut to which the wovers are attached for furniture. Places for drinking are chosen at their discretion. If the facing is made by a plinth, then the place is cut on the place so that the drank part approached it tightly;

go to drinking the door: it is better to use the material from which the framework is made. Drink holes under the loop. It is better to choose a loop with which the door is closed at the level of the base of the couch. Loops, when installing which the door shifts from the base, it is better not to take;
the next stage-promotion of the glue of the shelters and holes. Then the specks are installed in the holes and glue the frame. When the parts are fully assembled, it needs to be secured by self-drawing. Only after the door is attached;
cut the share, drawers are installed on them. They are located in the entire width of the side wall. To make a force, you will need a sheet of plywood from it you need to cut two web width somewhere 16 mm. When the pollows are ready to attach them inside, where the bottom of the drawer is located;
after the time is installed, you can go to the creation of the drawer of the drawer. Drink the bottoms that are made from plywood;
cut the back wall from the boards, two sides. After they are made screw the walls with self-draws to the bottom.

To prevent cracks in the plywood, before screwing the screws, you need to make holes. It remains to be made only the facial part of the drawer. We make the upper part, cover and secure it to the body, edge for furniture.

Double bivalves from wood

The process of making a bedside table with two sash is similar to a single bedside table. Initially, the frame is made, we put markings, then drink. On the sides, the slots are performed so that the bedside one is tightly adjacent to the wall. Further cut the bar under the shelf of plywood. Dimensions are the same with a single bed.

Most often a few compartments. One department takes a quarter of the entire design to the width, and in the height all the place. The remaining place occupies the second branch. It is divided into two parts by a horizontal shelf.

All parts of the tree are bonded between themselves, they are pre-punctured and sets are installed, as shown in the photo. After all parts are fixed with self-draws. Next, cut the door and install so that when closing there is no deviation.

DRAWING DRAWING CUMBES FOR HOME

Hanger

When making hangers, we select several wooden boards. Boards must be the same length. Describe the option how to make a hanger from blocks, optionally you can make a hanger with a large number of blocks:

lays the boards to the surface so that there is free space between them. At the top of the hangers, they are attached to the rake at the level of where the hooks will be attached;
go to the manufacture of shelves for hats, its size completely coincides with the size of the hanger;
when the shelf is prepared, it is attached to the hanger with self-draws. On each side of the shelf attaching ribs so that the hats do not fall from the shelves;
now that everything is ready to fasten the hanger on the wall, where they planned to attach it. If the boards are long, then they should be cut to the cabinet level. When the hanger is shortened to the desired level, you can use.

Pencil case

In the production of Penal, there is nothing complicated. It is necessary to purchase a furniture shield, cut out of it: wall, bottom, front part, lid, two rear walls, they cut the place for the plinth, so that the wardrobe fits tightly to the wall.

Work plan:

collecting frame. Initially, we wash the melting for furniture holes and seasons. After they are attached to the places, collecting the frame, then it is fixed with self-draws;
now drink two canvases that will serve for sash. In each of them, the holes in which three loops are attached;
now we determine how much shelves will be. We divide the height of equal compartments, for each shelf and install fasteners at the desired level;
cut the shelves and install. At the end of the work attaching the sash.

Wardrobe Making Scheme

Case - Pencil Pencils with Open Shelves

Ordinary wardrobe

Cupboard

Consider how to make a closet that can be placed even in the smallest hallway design. It will be installed on the legs that are attached to it by self-draws, they have a height of 55 cm, the size of the screws 4 × 16 is thus the gap is formed below. More information is not needed about the data support, now we will pay attention to the assembly. First, we will define the size of the details.

Cabinet in the hallway

Materials for creating:

Laminated chipboard;
organit painted;
melamine edge, the basis of adhesive.

The facade is performed under the order, it is made of an aluminum frame, attached to three loops, a photo mirror is fixed in the frame.

Preliminary drawing of the cabinet

This is a more expensive option, but you can use more budget. The mirror can be glued to the chipboard sheet using special photo glue. It turns out a bulky and heavy facade, relative to the custom version. For him, it is necessary to purchase at least 4 loops, the closet is better to attach to the wall, it will be more reliable. Otherwise, he will fall when the door opens. Therefore, it is necessary to determine the option of the facade.

To collect the framework you need to purchase sheets of chipboard of the following sizes:

1 sheet 390 x 460, cover;
2 sheets of 990 x 480, top, bottom;
1 sheet 380 x 390, shelf;
1 sheet 2110 x 390, backdrop;
2 sheet 2110 x 460, side parts;
1 sheet 400 x 440, side sides of the bedside tables;
1 sheet 570 x 430, shelf;
1 sheet 400 x 365, door of the couch;
1 sheet 2030 x 600, rear wall.

Measurements in millimeters.

Card cutting chipboard

Card cutting DVP

Before making a closet, you need to select a place where the places that are often used are not closed. Frame to connect easy.

When collecting, use tools:

screwdriver with high power;
tree drill steam pieces;
set of fasteners, with a hexagon for confirmates;
pencil;
line;
a hammer.

Furniture tools

Specialized accessories:

retractable Plank: Length 410 mm. It is attached to the shelf below. Handers are placed at the level with the front part;
four hinged internal loops. 6 pieces (2 pcs. For a shoe bedside table, 4 pcs. For a large door);
hooks, handles: create design, the choice is varied.

Required accessories

For coincidence of fasteners, the inner shelf is better to place 35 mm above. Produce screeds to confirm. Under them in the end and in the plane chose the details. Fasteners standard 5 by 73 mm. In the plane of the holes through a diameter of 8.5 mm. Marking is defined depending on the number of parts. Such as sidewalls, facades, an open part.

The organs are fixed with self-proofs or nail with nails. If free time is enough, it is better to choose the first method. The second way is better to choose if you do not have a large margin of time. In the first and second option, it is important to comply with the design remains rectangular. If this requirement is not respected, then the facades will look unattractive and will not be able to close well.

Cabinet behind the door

Place behind the door is ideal for placing a wardrobe. Having installed it, the wall will be protected from damage that the door handle can do. It will take an inch board, the ray, which is previously covered with wallpaper and covered with varnish or paint. Varnish use if the wallpaper is suitable for the design of the room. Paper for pasting applies so that the board does not occur during operation.

Cut the blanks similar in size with the door:

side rack;
shelves.

Parts are connected by self-masses, with large wicker caps. Shelves are attached to the wall with the help of corners or rails. Rack on the side is fastened with corners or hidden fastening.

Behind to the end is installed canopy loop, the self-tapping screws into the wall and the loop with the sidewall is put on it.

Mounting doors on a closet

Hidden mounting can be applied for shelves. If the cabinet is fixed with hidden fasteners, then if you need to easily remove it. How to make your hallway, and what design to choose only the owner of the house can solve, and use the recommendations that are given in this article or not, it is only his decision.

The hallway is the very place from which the house begins, and the first impression of it is, therefore it is especially important that such a room looks beautiful and original. To make a unique and harmonious setting, you can arrange a hallway. Then with complete confidence it will be possible to say that it exists in the only option.

Local fantasy is not limited to anything, and any ideas can be realized.

Pros and cons

Currently, almost anyone can independently make a diploma. You can buy in stores a ready-made set of materials that you just need to independently assemble at home. It is also permissible to order the manufacture of the necessary parts. According to individual sizes and preferences.And if you have the opportunity and the necessary tools, that is, the ability to make all the components yourself. In any case, if you take on the manufacture of furniture with your own hands, there are advantages and cons.

To the merits can be attributed:

original design;
matching furniture with the necessary dimensions with a minimum error;
the cost of homemade furniture is somewhat less prepared;
fascinating pastime.

The following nuances are the disadvantages of such design solutions:

as a result, the product may not get so ideal as purchased in the store;
the manufacture of furniture takes a lot of time and strength;
a lot of dirt and dust will appear during the work, so the best option for the rest of the household is to be at this time in a separate room.

Required tools

In order to proceed with the process of registration of an entrance hall, it is necessary to carefully prepare and stock all necessary. In addition to the material or finished parts, It will be necessary to prepare:

accessories (corners, loops);
pencil and roulette;
required fasteners (screws, bolts);
a knife for construction;
sandpaper;
a small saw or jigsaw;
screwdriver or electric screwdriver;
materials for finishing and decor if necessary.

Prepared drawings and schemes will also be needed.

How to do at home?

It is not so difficult to arrange a hallway, as it may seem at first glance. Even a novice master can cope with this. However, if there is little experience in creating furniture or not at all, it is better to start with simpler models.

Before starting work, it is worth determining the desired model and dimensions of future furniture.Stripping better from the size of the room in which it will be. Do not use all the space to the maximum. If the room is small, then the furniture should be a little. It is possible to limit the standard set of compartments for jackets and coats, shoes and different trifles.

This will especially be relevant for urban apartments.

If the hallway is planned to be done in a private house or in the country, it is better to make a more spacious atmosphere. If the space allows, the wardrobe is ideal for it or even a small dressing room, fenced with sliding doors. It is worth considering that this option will be somewhat more expensive. Determining with the organization of the room, it is worth thinking about the seat, where it would be convenient to wear shoes. For greater comfort, it is possible to make it soft, for example, by writing the surface of the foam rubber.

Choosing a suitable model, you can move to the next step - to remove the measure. They need to be removed with special care. On the same plane it is better to make several measurements in different places. Between two numbers, the choice should always be done towards smaller. We must not forget about the necessary gaps. On each side for future furniture, it is necessary to leave from 0.5-1 cm of free space.

Materials

For the manufacture of furniture, you can use a variety of materials:

LDSP is the most popular material.It is available at cost, has a wide palette of various colors and is available in all building stores. In addition, in work he is unpretentious. It is very convenient and simply made furniture. When choosing a chipboard, special attention should be paid to the manufacturer and product quality. In the manufacture of such materials, harmful resins use as a fastening element. It is important that their content does not exceed the permissible norms, and also to be closed with laminated edges on the edges;

Tree - environmentally friendly material. It is durable and has an exceptional appearance: it looks very presentable and solid. However, in price, it is an order of magnitude higher than, for example, LDSP and requires compliance with special rules when leaving for itself. In the process of construction, it is easy to work with it, as it is amenable to almost all types of processing. From the boards you can build almost any design. This is the only material that can be left in pristine and not subject to further processing;

The best option for working with wood is furniture shields. They are already specially prepared, so that of them it remains only to cut the necessary details and start making a hallway.

The cutting line must be processed independently;

Plywood - Very easy to process material. It has a low cost, strength, resistant to moisture, heat and other environmental factors, so enjoys great popularity. For its manufacture use veneer from pine or birch. The plywood of coniferous wood has a very beautiful drawing and most often takes on the basis of furniture. Birch wood is more expensive. It has a contrast structure and is one-photon;

Plasterboard - Option, more suitable for building a dressing room. From it you can produce any design and even a small new room. Even newcomer will be able to build a design, but you need to carefully follow the instructions, and perform every action clearly in accordance with them. Plasterboard allows you to build a box even in an uneven room, smoothing all the defects.

With the help of drywall, you can create both vertical and horizontal designs, which gives a fantasy space for decor. Another plus of this material is that with the help of it you can disguise any communications, and under the trim, it is easy to stretch the wires and pipes between the frame profiles.

As minuses of plasterboard, you can mention the low strength of the material. It is prone to deformations under the influence of moisture and external mechanical impacts. In addition, the design itself with profiles takes away the space, so such an entrance hall or dressing room is better to build in spacious premises.

Screw materials

As materials for the future hallway, not only the usual options can be used. The basis can serve infirm materials. The manufacture of such furniture will cost inexpensively, it will look original and not to give up in appearance in appearance products from the usual tree or LDSP.

From plastic bottles can be a ottoman or a cabinet. They need to be copped with each other, for example, scotch and give the desired form. This will require a framework. For the base, you can use a dense cardboard or Phaneur.

Press the product aesthetic species should be with the help of a foam rubber, fabric, artificial fur or leather.

Similar is the design of plumbing pipes. They are cut down the same length and are bonded between themselves in the desired frame glue. To make a neat form, it is better to close with corrugated cardboard or plywood. Inside the pipe it is better to fill in a dense material to prevent the deformation of the finished product. For this, an old rug or dense fabric is suitable. Outside, the product can be painted or clapped with a cloth.

Original and very stylishly looks like furniture made of wooden boxes or pallets. You can make an unusual wardrobe, hanger for clothes, a tumba or shelf for shoes. The design is assembled very quickly and easy. The finished product can be painted paint, supplemented with unusual fittings and decor. Things can go already used in the house things that are no longer needed. It is enough to restore and reflect them. You can use old doors, tires, vintage suitcases and chests and even window frames.

Dimensions

The size of the room depends the dimensions of the future environment. In large rooms, you can afford to put a large wardrobe, dressing room, shelves and a sofa. The street shop and the lantern in such an interior look originally. It is not limited to solve a large room that all designers dream of fantasies in this case, and it is possible to afford any ideas.

Solutions are suitable for medium-sized premises with a standard set of furniture for the hallway.It can be included in it a small closet for clothes, a small seat, an endbook or a chest of drawers, as well as several wall shelves.

The most uncomfortable option is a small space. It needs to be fitted with everything you need, but also not to clutch everything with furniture. In this case, a mini-entrance hall is suitable. For clothes, you can use a wall flat hanger, for shoes - vertical structures, to put a small pouf as a seating, and for the trifles, think over a small shelf. An excellent storage solution will be andresoli, which are fixed under the ceiling.

Color

The color of the future hallway can be any. This is one of the main advantages of independent design. The finished product can be painted paint, go to conventional wallpaper or canvases with photo printing, decorative stickers, film. If you want to emphasize the natural beauty of the tree, it can be simply covered with varnish, either artificially create, issued furniture in retro style.

When choosing a color, it is better to stop on bright shades, as it often the hallway is small in size, and dark furniture creates the impression of a cluttered space.

For the same purpose, the hallway must be with a mirror, and the more mirrors, the better. They will help visually enlarge the room.

Step-by-step instruction

Start the manufacture of the hallway is better from the simplest element - the couch. In order for the error during work during the work, and the finished product was subsequently only pleased, You need to thoroughly think over every action and stick to the plan:

define the desired height of the product;
we cut out of the furniture shield 2 the same side parts, according to a certain height;
drink down at both parts angle, if there is a plinth, and the product will stand tightly at the wall;
from above a little spill the angle so that the upper part is narrower;
drink the bottom base from the furniture shield, according to the selected width;

we connect the sidewalls, the bottom and top base with the fastener (the lower base should be located slightly above the floor by several cm). You can also make a furniture shield base, which will close the gap between the floor and the lower base;
we make the back of the plywood and secure it with the help of fasteners;
drink the door from the furniture shield. It may not be at the full height of the cabinet, but below, then the pull-out drawer will fit above it;
we make holes in the cabinet to the door and secure it with the help of loops;

we make a drawer from a furniture shield. Bottom can be filled out of plywood. The front part must be slightly higher than the remaining parts so that the contents of the box are closed. We fasten the details of the box with self-drawers;
we attach the guides to the box and the end, thoroughly making measurements;
if necessary, drink the shelf, make a mount for it;
we collect the product and attach the handles.

The large closet is made in the same way. If it is planned to store clothes in it, you need to think through its depth so that the shoulders can fit. If the space does not allow to make the furniture of sufficient depth, then for this you can choose the end hung, which is suitable for shallow cabinets.

If a wardrobe is planned, the frame is assembled similarly to the end of the Tube. The lower and top base are attached guides for doors, which occupy 10 cm, so all shelves and boxes are made by 10 cm less sidewalls in depth so that the sash can be closed.

Standard cabinet depth 60 cm.

In addition to the cabinet and the cabinet, you can make a wall hanger with hooks. To do this, it is enough to cut the desired size from the shield, or several narrow boards that are connected with another transverse board. Vertical boards can be made curly, adding them contrasting elements in color. The hanger is complemented by hooks and upper shelf.

Another way to get a new hallway - restore the old one.The update must be started with surfaces. They need to be well cleaned from pollution, degrease and prepare for paint, glue, wallpaper or films. You can update not only the surface, but also the entire design: replace the facades, fasteners, fittings, add decorative elements.

Accessories

The addition of finished furniture accessories is the final bar in the design of the hallway. The main thing is to determine what style the room will be performed:

for retro style, it is possible to use objects stylized under the antiquity, vintage hooks and handles on furniture, as a seating to put an old chest, hang a large mirror in a carved frame and supplement the picture with an ancient carpet with patterns;

modern style involves a lot of light and space. For these purposes, it is better to use bright shades, mirrors and glass. On the walls you can arrange mirror compositions, add original lamps and put the homemade pouf of bright color;