How to make a stand for a table lamp. Lamps and lamps do it yourself: the best ideas and master classes. Chandelier from spanings

Hello to all lovers of homemade. I think every home has a light source, whether it is a lamp, chandelier or backlight, which in one degree or another to help in everyday life, but boast of originality Such devices can very rarely, since the manufacturer usually does not make a unique product, only except those What to order, but such pleasure will be hidden. It was about this that it was decided to make the original desk lamp of the beech with their own hands, and all who little worked with the tree the assembly of such a homemade will not seem impracticable. First you need to decide on the material and tools that will be useful in the manufacture of this self-made.

Before reading the article, I suggest watching a video about this homemade.

To make a desk lamp with your own hands it will be necessary:
* Booke boards
* Tree glue
* Pleismus
* Hand mill
* Grinding machine
* Sawing machine
* Clamps
* Furniture oil
* Drilling machine
* Dimmer
* Wires with fork
* Electric drill
* Sleeve with carving for furniture with M12 thread in 1,25 puzzle
* Super glue
* Stud M12 step 1,25
* Rubber screed
* Sandpaper

That's all you need to build such a homemade desktop lamp.
And now the most interesting, the assembly process.
Step one.
First you need to drive all the bokeh boards on the reysmaus, it is done in order for the thickness of them the same.

We do it from all four sides.

After that we saw a wide board into small suites, a width of approximately 5 cm, of which the lamp head will consist.

Step second.
After boards are ready, they must also be driven on the flight, and then cut into small blanks using a sawing machine.

Composite parts must be calculated in advance, the angle of sleep will depend on their number and the desired size of the lamp itself. For simplicity, we take 8 parts, on each of which you need to do with a drink under 45 o on both sides, it is done the easiest way on the sawing machine.

Step Three.
When all 8 blanks are adjacent to the size of them can be glued, it will help us with adhesive for wood. Before gluing, it is necessary to glue the glued surfaces to improve the contact stain.

We smear the glue throughout the area of \u200b\u200bthe junction of each part and fasten with the help of a rubber screed, it is to the word, you can easily be made from a bike camera.

Surplus glue by removing a cloth and leave to dry for a couple of hours, but for now the glue dries away three more such details.

Step fourth.
After drying all four octagonal billets, it is necessary to make a drink at an angle of three of them to create a lamp shape. How to do it more clearly seen in the photo. You also need to make an octagonal bottom.

Pitch fifth.
We glue four octagon into one whole, after drying, we grind on the grinding machine before getting a form, similar to a vase.

When grinding, rotate the workpiece as smaller as possible, the correctness of the lamp shape will depend on it.

Step six.
It's time to make a leg for a lamp, with which you can adjust the direction of light.
We heat the four small bokeh boards and on the grinding machine twigrating the edge, for this it is best to draw a circle in advance in advance.

In the center of this circle drills the hole, we make it on both sides and on each of the boards.

Then you need to make three small planks, adjacent to both the head of the lamp and to the base, which will also be rounded on the one hand, and for their gluing there will be two small blanks, as in the photo.

We embroine the places of glue glue and press the clamp.

Step seventh.
To regulate the brightness of the light, it is necessary to make a wheel, which after will be planted for a dimmer. Similarly, this wheel make six more such, but to fix the position of the lamp.

In the middle of drilling a deaf hole and glue the M12 thread sleeve with a step 1.25 on the superlocks and screw up to the stop.

To fix the position, three M12 studs in 1.25 increments will be needed, which will pass through the entire fastener of the lamp.

Step eighth.
Now you need to make a shield or the so-called foundation on which the leg of the lamp itself will be fixed. The form of it is also a round, made using a grinding machine.

Surface with grinding machine and on top of the oak thin plate, we glue the circle with a smaller diameter.

For durable gluing, we use clamps, and better at once.

In the meantime, the glue dries can be applied the first layer of oil on the head of the lamp.

Step ninth.
Glue drying, the oak circle was glued, which means we go to the installation of the dimmer. We disassemble its body, we will need the inside the inside, drills the hole in the oak mug and placed on the reverse side of the board sizes, after which it remove the excess material to land the dimmer inwards.

As you know, the thing created by your own hands can become a decent decoration of any interior. Moreover, the more such designer and cozy items, the more interesting and color looks color. For each room of your home or apartment you can create desktops that will become an excellent decoration. And for this, you can use the fir-handed materials and very often those that are initially difficult to submit to the role of this functional and necessary instrument.

Where to begin?

Of course, first you need to think about the design, but we will return to this issue a little later. In the meantime, we define how to make a desk lamp from what we have at hand. We will use the following elements and devices:

The basis for the lamp (it can be a piece of plywood or DVD drive);

Frame from old lampshar;

Tube (it can be any);

Various adhesive compositions;

A piece of cable;

Jewelry for the base;

Switch, fork, cartridge;

Material from which we will prepare lampshade;

Aerosol paint.

Desktop Lamp Scheme

The classic desktop lamp consists of several parts. First, it is a base, a column and in this capacity, it is quite possible to use a glass or lamp chill, for example, from the fabric. It has a switch that is located on the power cord or on the basis, sometimes they are mounted on the base. Depending on the purpose of the lamp, it can have a different design:

1. A classic lamp that is used to illuminate the workplace. The diffuser here is a glass ceiling or textile lampshade.
2. The device on the clamp is attached to the table. The column of such a lamp is flexible, that is, you can tilt it as you like. Plafond - opaque fool, which focuses light in one direction. An ordinary or LED is used as a light source.
3. The dimmer lamp is the ability to adjust the brightness of the light source.

Implement ideas

So, the details of which are made the simplest hand, we have prepared. Now we take glue, base and tube and glue them with each other, for example, with the help of paper or an old newspaper. Yes, do not forget to do the hole at the heart - the cord will go through it later. We give the design to dry, after which we start to decorate our tube.

To do this, we use anything: beads, buttons, beads, bows, figures from kinder surprises and much more. Thanks to this original and at the same time, simple decorations, your lamp will look very non-standard, and therefore it will be possible to transform the interior. The most recent task is to cover the paint lamp. It is best to choose compounds in which there will be no toxins, as well as those that quickly dry. After the device is dry, you can do the manufacture of lampshar.

Lamp from the old vase - fresh ideas

To create your own hands, it is not necessary to look at some designer ideas or strive for effect. It is enough just to take an old vase and make a lighting device based on it. So you will immediately kill two hares: on the one hand, give a new life of an old thing, and on the other, decorate your house something unusual.

So, we will need the following components of the future instrument: the old vase, the cartridge from the old lamp with the holder or holder, for example, from the traffic jam. As the basis, a piece of foam, which inserts the reinforcement is completely comes. It must be thicker to pour epoxy resin, not forgetting about compliance with the safety rules, since this composition allocates harmful substances. Of the prepared materials, a design is created, which is inserted into the old vase. Now it's small - to make a lampshade.

Abazhur - Case Crown

Probably the basis for creating a lamp can be any. But with the help of the lamp, you can change the appearance of the lighting device at least every day. In addition, this element is created easily and easily and again of the materials available at hand. You can perform the design in a variety of stylized directions, but it is important that the table lamps are made, with their own hands, harmonized with the surrounding space. What is the way to create a lampshar choose?

First, the most optimal option is to make a ceiling of the same wallpaper that is saved room. To do this, we take the wallpaper and cut off from them a strip of a wide slightly larger than the label. Then you need to gently glue it to the lamp to the lamp, while it is important not to break it and not to remember. We give time to dry, after which you can safely put on the product on the lamp.

Secondly, the tissue lampshade is popular. It is very simple to make it, and if he wants, it can always be removed and replaced with another type. It is created such a lampshade for the same scheme that is given above.

Children - all the best

As you already understood, to create a desk lamp, it is not necessary to be a generator of ideas and thoughts. It is enough just to show a fantasy. Modern children's desktop lamps are characterized by the brightness of the design, but you can slightly change their appearance and make them more interesting. For example, those who know how to handle cloth can make the original lampshade lamp in the style of Patchwork. In addition, this technique can be implemented somewhat differently, for example, to make the basis for a lamp from children's toys - cubes, puzzle, or decorate the lamp toy toys from kinder surprises.

For the Girl, you can use more romantic drawings and decorative elements. For example, lampshade, richly decorated with satin ribbons, bows, beautiful buttons or an interesting applique, accurately will like to taste cheerful fashionmented.

Original designs

And now let's look at how unusual can be a table lamp. With your own hands (the photo confirms) you can make it very and very throwing, spectacular and memorable. For example, if you have an old globe, it can be safely adjusted under the original shape of the lamp. By the way, this one can safely be given to avid travelers - it is accurate to appreciate.

But the needlewomen probably stores a huge number of balls of threads of many different colors. You can connect a beautiful and bright case and put it on the lampshade. And you can simply add the tissue dome using original related ornaments. Such a lamp will give the room with the facilities and create a favorable situation for the pastime.

Many are laughing, but in the help of originality, almost everything can be used. Suppose, plastic dishes in the form of forks, cups, spoons, wand-umbrellas for cocktails. To create a non-standard lamp lamp, we need a balloon to which we glue all this plastic and cheap good. By the way, on request, you can paint it with acrylic compositions - so your lamp will shine new paints and will look very original!

What is the result?

Thus, ideas for creating a desk lamp at home is very and very much. Choose the way that most suits you in terms of style and constructive solution. After all, fresh ideas in the interior are the easiest way to update it. And this method is profitable, since it is possible to create original lighting devices from what is in your storage room.

Original desktop lamps are unusual products with a design that rushes into the eyes and emphasizes the interior, makes it more comfortable as well as interesting. But self-made devices may well possess the same characteristics.

They are quite simple to make out of the girlfriend, decorate to their taste, and the design will be unique. If it is planned to use a rather time-consuming manufacturing technology, it is better to take the master class as the basis.

Glass Bottle Design

Homemade desktop luminaires of this kind are made using a wine bottle. Materials will also require greater tape. The drill will be used in the paper, and as an original idea for the light source, you can use a New Year's garland with small light bulbs (LED). Glass of bottles should be dark enough to protect against bright radiation of the light source.

Master class on the manufacture of a table lamp:

1. The bottom of the bottle is carefully wrapped by a painted scotch, it is better to make multi-layer glass protection so that it does not crack when drilling.
2. It is necessary to work with a wet drill, and the drilling speed should not be maximum. On the scotch, which covers the bottom of the bottle, the mark is made in the center. Here will be a hole, through which the garland will be passed.
3. So that the homemade lamp does not imagine danger, the edges of the hole are processed by sandpaper. To do this, you can wrap it with a pencil.
4. In the last stage, the garland is stretched inside the bottle, and this should be done as evenly possible.

There are various ideas how to decorate such a lamp, and the master class to their implementation. For example, a bottle painting can be made. Another original option is the use of girlfriend, for example, crocheted coating for a glass chassis of the lighting device.

Soft toy lamp

To implement such an idea, you need to use diagrams and master classes. The basis of a soft toy - pattern. The type of materials used is selected any, at its discretion.

However, it is recommended to pay attention to such features: not too thin or dense fabric. As an option - Len. You can bind all the elements of the scheme. The main thing is that in this case the binding was an openwork, not too dense.

First, all available parts are sewn, the base of the toy lamp remains open. The filler is styled inside. Then it is recommended to treat the tissue or a crocheted toy with a special makeup, which is used to seal the matter.

Soft toy night light

The product must dry well (1 day). Further, the filler is cleaned, which is easy to perform with a pencil-wounded bilateral tape.

At the bottom you need to cut out a small hole for the output of the wire and place LEDs.

The bottom edge of the product suits the base to be as smooth as possible. A small hole is cut on the side for a convenient location of the cord. Inside the hook or stitched toy laid the LED cord.

Lamp made from flower pot

Another master class allows you to create a lightweight device from undergraduate materials that will surely find most users: a pot for flowers or a ceramic vase.

You will need a flower pot or ceramic vase.

In the work it is useful: a wired connector, a cartridge, a metal cutting tube, the length of which slightly exceeds the height of the pot. Also required plaster and spatula. To install a rod, a disk and two nuts will be required. Recent elements will enable the disc. This side of the bar is lowered to the bottom of the vase.

Attach the disk and the puck to one end of the carving pipe

So that the homemade lamp was stable and durable, the bottom of the vase is laid out a gypsum solution, which must be prepared in accordance with the manufacturer's recommendations.

Gypsum dries very quickly, which means that you need to act quickly and accurately. Before the fill at the bottom of the vase, a rod with a disk should already be installed.

A sufficient thickness of the layer of a gypsum solution is up to 1/4 of a vase height. Full pouring of the gypsum occurs after an hour.

Leave the disc on the bottom, and fill the pots in the pot.

Next, the camera is attached to the cartridge. It remains only to install the lampshade. If you wish, it can be bought in the store, however, there are more original ideas: a crochet-bound lampshade, a product of fabric, etc. The feed cable is stuck through the upper edge of the vase.

Secure the lampshade on top of the cartridge

To hide it, the lampshade must be located at or just below the edge of the vase. It is recommended to choose the plastic materials in accordance with the tint and style of the lamp stand, as well as taking into account the interior design.

The more transparent material is used (crochet, fabric, etc.), the more intense will be lighting from the lamp. For the manufacture of lampshar, the finished framework from the old lighting device will also be required, and the homemade analogue uses the wire.

During watching the video, do not forget to turn on the sound!

You will need

Materials:

• 2 pieces of MDF.
• Based table lamp
• Sewage pipe
• Paint
• Thickener for paint
• Primer
• Twine
• Glue for Safety Sheets (Mordan)
• White Spirit
• Susal sheets of copper color
• Plastic parts for fixing base
• Patina
• Shade
• 2 dye for cloth of different colors

Instruments:

• Compass
• Cutting machine
• Drill
• Electric stapler
• Paint brush
• Glass jar and a piece of gauze

Instruction

1. Draw on MDF slices two identical circles with a diameter of 20-25 cm. In the middle of the circles, drill holes with a size of 2 mm. Drink the parts from the plates on the machine - you should get two circles.

2. Reduce the circular step by about 1 cm and take the new circle on one of the parts. Drill the hole on the arc and cut the hoop.

3. Connect the hoop and the remaining circle of the larger diameter with glue and the stapler. Severe the resulting item and drill in the middle a hole with a size of 12 mm.

4. Insert the base of the lamp into the resulting stand. Put a pipe to the base, mark the height and disconnect the piece of the desired size.

5. Strong pipe and base. Give the primer to dry.

6. Prepare a thick spa from the paint and apply a thick layer on a piece of pipe.

At the level of 1/3 of the height, turn the pipe with a piece of bellows, make a loose knot, squeeze this place with a putty, and then remove the rope.

The base, too, cover the putty. Spray the details of the Mist from the sprayer and let them dry.

7. Dilute Mordan with several drops of White Spirit. Apply the solution on the parts of the lamp, then cover them with gravestone sheets and scroll the surface with a brush.

8. Connect the base of the lamp with the resulting details. Do not forget to drill on the side on the stand hole for the wire. So the lamp will be stable.

If you want the ordinary metropolitan apartment to resemble an externally unique place in beauty, then in order to achieve this, you can use one of the most popular ways to date.

Some invite home designers, and someone just takes the initiative to their own hands and is looking for how to make a lamp with their own hands to quickly and easily transform space in the apartment at their discretion.

Of course, in order to proceed with work, in any case there will be a certain amount of different undergraduate material, as well as certain knowledge in the assembly and subsequent installation of electrical appliances.

If you did not have to face earlier with the last earlier, then you should not get upset immediately, because absolutely all the rules can be found in free access on the Internet and there is nothing difficult in them.

Basic principles of loyal lighting in the room

Using absolutely any lighting device must first meet the main principle - ensuring accurate access of light on a certain in advance space.

Where and how the source of lighting is located, subsequently will definitely affect the overall picture of the interior perception of the room.

At the same time, if you see the photo of the lamp, then the following goals become obvious:

• Achieve maximum working atmosphere;
• Create an interesting decorative effect for rest;
• Focus on a certain part of the room;
• Light locally space required, for example, exclusively for personal needs.

Thanks to the installation of a desk lamp, it is fairly easy to achieve high-quality lighting in a particular place.

What color gamut will be fashionable this season?

Of course, the lamp lamp is played a special role in the external transformation of the room. For example, if the room design was originally made exclusively in dark shades, then in order to slightly revitalize the general view of the room, for example, to make that the table lamp will be bright green.

Another interesting way to give a room of originality is the coloring of the simplest plafone in interesting lines and even geometric patterns.

This option most designers are advised to be used if the initial room is performed in sufficiently warm colors. It is worth noting that this option is not advised to be used in children's rooms, since the lighting in any tone will be more familiar to them.

Speaking of exceptionally neutral color solutions, especially allocate various monochrome shades, as well as the color of the sea wave, gold, shades of pink color, is particularly distinguished. Any of these colors can raise the mood literally in a few minutes.

Sequence of actions when creating a lamp

Despite the fact that many are confident that the lamp is extremely difficult to make lamp, in fact, only a few simple items will be needed to work, which can be purchased almost in any store and, in general, the creation of a lamp is not distinguished by complex moments in the work.

The first thing to do is be sure to make a detailed plan. This is necessary in order to be a clear representation of how much the amount of material goes further on the installation of electricians.

In addition, it is necessary to make measurements in the room, namely, to find out how much the distance from the location of the device to the point where in the future it can be connected to the network. It will also have an impact on how much money will have to spend.

It is also important to especially take care that the assembly process and the subsequent installation is fully safe.

If you assume that work in any case will necessarily concern direct contact with various chemicals, then you should cook apron, gloves with glasses, as well as forced hood.

Note!

Safety measures are definitely not something worth neglected because when creating a lamp with their own hands, the process should deliver extremely pleasant emotions.

Photo lamp do it yourself

Note!

Note!