DIY loft-style items. Loft style table. Basic characteristics of the loft style

There are a lot of design styles and sometimes such items are used in them, which in most cases are simply thrown away. In this article we will show you how to make your own loft-style furniture. Materials for such furniture can be found in everyone who made overhaul... Old metal pipes and planks are fine for making beautiful designer pieces.

The loft style is not a new direction and it arose back in the fifties of the last century, when the old premises of factories began to be used as living quarters. A feature of this style is that you can combine new and old things in it. Therefore, it is perfect for creative people who love comfort.

Regarding loft-style furniture, it should also combine different components. For example, a wardrobe, a rack, a bedside table can consist of iron racks, handles, facades, and a table from metal pipes must have a tabletop made of new materials. The most important combination, but it is worth remembering that preference is given to old or aged materials and they should be clearly visible in the furniture.

Everyone has it economic person over time, a significant number of incomprehensible "pieces of iron", old building materials in the garage, then making furniture in this style will not be a problem. Moreover self-production will help you get two benefits at once, and have a design original furniture and save on buying it.

What is considered flaw in other design styles, here, on the contrary, can be an advantage, because an old tree with traces of bark beetle or visible metal parts does not spoil appearance furniture.

Our today's article will be devoted to an unusual industrial style, or rather, we will look at how to create a loft-style decor with your own hands at home.

The loft and style in the interior of the same name appeared in the middle of the last century in the USA. Old, decommissioned factories and warehouses are beginning to be settled by enterprising creative people, artists, photographers and other freedom-loving personalities.

The difference between loft rooms can be called huge ceilings, big windows, which give maximum light, freedom of planning the interior space and the spirit of industrialism.

To fully feel the spirit of this style, you need to add loft-style decor to the space. Since these things can be called rude, sometimes brutal and unprepossessing, they can quite be done with your own hands at home.

Loft style furniture

The pieces of furniture that can be seen in loft-style interiors are often quite clumsy. Such furniture can be made independently from ordinary wooden pallets.

Pallets are used not only for creating country furniture, such items will fit well into an industrial loft-style interior.

From wooden pallets you can make almost any piece of furniture:

bed
sofa
shelves
racks

Coffee table made of wooden pallets

First of all, process the surface of the pallet from burrs and chipping, you can use an orbital sander or sand it by hand. Then, it is better to process wooden surface for protection with stain, paint or varnish so that the furniture will last longer.

Then just fasten the pallets together with nails, screws or glue, add legs and voila, new item loft-style furniture is ready.

If you put glass on a finished table, a very practical sample will come out.

Loft style bed

It is very easy and simple to put together a bed from wooden pallets. Just bond together required amount pallet, cover with paint and / or varnish. Place a mattress on top - a stylish bed is ready.

Pallet sofa

You can even make a sofa from wooden pallets, just attach its back to the base with corners. To strengthen the structure, additional wooden slats can be placed on the sides.

What else can be made from wooden pallets?

Underframe with drawers under the countertop in the kitchen.

Rack

DIY loft-style lamps

In order to finally emphasize the loft style in your interior, the designers recommend using lamps that create a special atmosphere and the desired entourage.

The loft style is characterized by various pendant lights on long wires, where the basis is ordinary bulbs or Edison lamps. Such lamps can be framed with frames made of metal, mesh or any other materials.

Such ceiling lights are not difficult to make on your own at home.

Workshop on making a ceiling lamp in an industrial style.

Also in the loft style, floor-standing lighting eg floor lamps. They are based on metal elbows connected by hinges or swivel mechanisms.

Wall lamps made of water pipes- one of the main trends in the loft interior.

dav

A characteristic feature of the loft style is the use of household items as decor. How do you like a bicycle hanging on a wall and used as a decorative unit.

Also, many people use graffiti in their loft-style homes.

Loft wardrobe with own hands made of wood and pipes | Curbstone in the hallway on wheels | Carpentry DIY

DIY: Concrete Flower Pot Loft Style

Master class: Volumetric letters from concrete. Loft-style design

DIY. HANGER AND SHOE SHELF IN LOFT STYLE

Creating loft-style furniture with your own hands is not the most difficult task. It does not require large expenditures and fine work... But you can't do without a sense of style.

The loft was born in the middle of the twentieth century during the conversion of industrial premises into residential ones. Today he increasingly comes to small and large apartments, outwardly adapting them for industrial areas. Here you can combine metal, wood, glass. At the same time, the space remains only conditionally zoned. Walls, pieces of furniture are made quite roughly, most of them are universal and mobile.

Table, console or bedside table

The offered item can serve as a bedside table, console, small mobile bar counter, TV stand. He will find a place and tasks in any corner of a loft-style apartment. The dimensions of the table are 60 ″ x16.25 ″ x36 ″ (152.4 x 41.3 x 91.4 cm).

Prepare to get the job done

List necessary materials:

Pine boards.
2 pieces of galvanized pipe 1/2 "(1.3 cm) in diameter, 60" (152 cm) long.
Galvanized pipe caps - 4.5 "(11.4 cm).
4 large swivel furniture wheels.
Drill with drill.
Pocket hole device.
Roulette, carpentry square.
End wrench.
2 ″ (5 cm) screws.
2.5 "and 1.25" (6.4 cm and 3.4 cm) pocket screws.
16 hex head screws.
Large screws for attaching swivel wheels.
Screwdriver.
Joiner's glue.
Sandpaper.
Stain.
Matt varnish for wood.

Prepare wooden parts table by cutting them circular saw... Or order a cut in the workshop, providing a list of required elements:

4 bars, 5.25 "long;
6 boards 56.5 ″;
4 boards 11.25 ″;
4 pieces 27.75 ″;
3 boards 59.5 ″;
1 piece 56.5 ″;
1 piece 51.5 ″.

Work description

Start assembling the side parts of the table. To do this, install small strips 5.25 "(13.3 cm) long, connecting them in pairs at the top and bottom of the 27.75" (70.49 cm) parts. Using a special device, prepare hidden (pocket) holes for their connection. Apply glue to the contact points and holes. Use a screwdriver to screw 1.5 "(3.81 cm) screws into the prepared holes.

Attention! Be sure to use wood glue when assembling. Any excess protruding at the joints should be removed immediately with a damp sponge. Then the finish will lie evenly, without stains.

Check 6 boards each 56.5 "(143.5 cm) long, they should be exactly the same. Prepare 2 pocket holes at the ends of each.
Screw 2 planks each to the matching long edges of the middle and bottom shelves.

To make the bottom and middle shelves the same, attach to the middle end strips 11.25 ″ (28.6 cm).
Place the bottom shelf at the bottom of the side bases, and the second one approximately in the middle. Use glue and large Euro screws for the connection.
Attach the two remaining 56.5 "(143.5 cm) strips to the top of the sidewalls. They will be under the top shelf.
Also, with the pocket holes prepared in advance, assemble the top shelf from 3 planks 59.5 "(151.1 cm). Replace it.
Via special attachment prepare holes for metal parts. They will serve as a rear shelf limiter. The holes should be approximately in the middle, at the same distance from the shelf below.
Check how the rod falls into place.

Get busy finishing table.

Special composition fill in the screw holes.
Lightly sand the shelves and walls, removing large defects and excess filler.
Cover the garment with a stain. Leave to dry.
Apply 1 coat of matte varnish to the table. Let the coating dry.
Flip the shelf. Place the wheels on the large screws and glue.
Insert the stop rods into place.

Loft bar stool

Complete your mobile console table with matching bar stools. If necessary, they can become stands for flowers, lamps or a bedside table. In addition, the seat height can be adjusted to the most comfortable position.

What to buy

2 boards with a section of 2x2 (5x5 cm), 8 feet long (243.8 cm);
round board diameter 12 ″ (30.5 cm) or 2 × 12x12 (5x30.5x30.5 cm) for the seat;
metal screw rod with a diameter of at least 3 cm;
welding machine(if you know how to work with him), means of protection;
device for preparing pocket holes;
drill;
circular saw;
metal plate;
nuts and washers;
screws for pocket holes;
glue for wood;
sandpaper;
roulette;
square;
pencil;
putty;
stain;
varnish for wood.

Prepare parts according to the list:

2 pieces 12.5 "(31.8 cm) long for base crosspiece. At the ends of the parts, there are non-parallel bevels of 10 degrees.
1 piece of the top of the base made of 3/4 "(1.9 cm) plywood, 8.5x8.5" (21.6x21.6 cm) long.
4 support elements 2x2 (5x5 cm) 23.5 ″ long with parallel bevels of 10 degrees at the ends.
4 crossbars 2x2 (5x5 cm) 9.6 "long. The ends have non-parallel 45 degree cuts.
1 round seat piece 12 "(30.5 cm).

Chair Assembly Description

From the part of the top of the base, cut off all 4 corners at 45 degrees, as shown in the figure below.
Mark both structural elements of the crosspiece. Using the marks, use the circular saw to make the center grooves to a depth of 0.75 "(1.9 cm). When connecting (only with glue), the parts should be flush.
Assemble the base of the chair. Prepare the pocket holes first. Then make connections with glue and screws.
Attach the outer footrest parts with screws on the outside. You only need one screw for each connection. Secure them with glue.
Place a large screw rod to the center of the metal plate (by welding) to hold the seat. If you have no experience with such work and equipment, contact a workshop.
Mark the middle of the back of the seat. Then attach the 4 large screws and the metal plate to the wood glue.
Using a special bit, drill a screw hole in the cross and the same one on the top of the base. Check if the screw rod can fit into them.
Fill the screw slots with putty. Let the composition dry.
Via sandpaper lightly sand the surface of the structure.
Cover the garment with a stain. Leave to dry completely.
To make the chair last longer and have a finished look, apply 1-2 coats of varnish to the wood.

Now you can arrange your own loft corner on the balcony, kitchen, living area, etc.

The loft style is special, unlike any other. At the first glance at a room with an industrial character, even an ignorant person will unmistakably determine the direction of the design. To truly embody this style in the room, it is not enough to make repairs taking into account the characteristic concept, arrange typical furniture from the store.

A loft requires a special approach. It is the filling of the room that is chosen especially carefully. You can make home furnishings to order or make loft-style furniture with your own hands. Consider what things will ideally fit into an extraordinary design.

Typical features of loft furniture

The main feature of the direction: compliance with the attic informality. Indoors, as in an inhabited production workshop, a pampered aristocrat should be uncomfortable. The ordinariness in the design of the space is completely denied. Used by the brave non-standard solutions. Unusual shape or content is a great choice.

Wherein, Beautiful design furniture conquers. In the hands of a skilled craftsman, even rubbish from a landfill can turn into a fashionable work of art. Pieces of wood, leather, jeans, skillfully combined together, create a completely non-trivial thing.

Loft items are striking in their massiveness, masculinity. Even coffee table seems like a giant. This is not gross rudeness, but gross elegance. This is because a room with a loft design must be spacious, high ceilings.

Not only the monumentality of things attracts attention. They are special from any angle. Subjects obey the classics of the genre, but they are not alien to originality. This applies to shapes and details.

Various physical defects are often used as decoration elements:

scratches;
potholes;
holes;
natural imperfections of materials.

The loft is subject to the principles of minimalism. Practicality prevails here, rejection of unnecessary things. Any object strictly fulfills the function assigned to it. Clothes, despite their non-standard appearance, are comfortable.

Materials used

The roots of the loft go back to the beginning of the 20th century. Abandoned industrial premises in the vastness of America were mastered for housing. The savings in building construction were not the only ones. The arriving tenants also did not have the opportunity to show off. Therefore, the furnishings were ascetic, in line with the surrounding space.

Furniture was rarely bought for new homes. We used what we could find:

old items from the landfill for rework;
chunks various materials for hand-made production;
cheap raw materials for creativity.

Often in loft interiors you can find vintage things, remade "with a soul". Given the small number of items, a lot of attention is paid to each of them. Even from simple materials you can make masterpieces. Especially if a person has non-standard thinking, a creative streak.

Modern furniture in the interior of the loft is rarely made of things from the trash heap. Most often, there are expensive designer items. If there is a desire, skills in working with tools, it is easy to make unique furniture from available tools.

Mainly used:

wood (pallets, scraps of building materials, various stumps, driftwood);
metal (pieces of pipes, metal sheets, wire, fittings, staples, rivets);
glass (full-size sheets, less often trimming);
dense fabric (jeans, ropes, leather).

In the manufacture of furniture, one material is rarely used. More often it is a harmonious combination.

Color and texture

To create a style that perfectly matches tradition, you need to consider color range... White, gray black, terracotta are the most preferred for a classic loft. Use colors of moderate intensity. Most often these are natural shades. Wood furniture is a priority.

Particular attention is paid to natural wooden color and texture. Raw materials are used as much as possible. Wenge is preferred, but other options will fit perfectly. Natural contrast is a good accent. Pattern with veins, annual rings, knots and hollows - the best choice to create an original thing.

Other materials are also trying to save natural look... Unpainted metal with sloppy chipping, clear glass with no decorations, rough cloth or thick leather are good allies for wood. Each material retains its individuality, natural look. The objects are given originality with the help of form, external appearance.

In the interior, accents are not excluded. Color is rarely used for this. Especially, bright options... Most often it is texture, unusual content.

Approximate filling of rooms with furniture

In a loft style, a single room is often decorated. This is a spacious "box" without partitions. In a new housing stock, the studio type of premises is often found. The so-called "free layout". However, the square of the housing must correspond to the chosen direction. A studio of 20-30 meters in a loft style will not look very good.

Preferably a room of 40-50 squares with high ceilings in an ordinary urban high-rise building or a large space in country house. Perfect option to maintain the desired atmosphere of the direction - loft apartments. V Lately such options are found in the real estate market.

Living space is not divided into rooms unnecessarily. Furniture or transparent partitions are used to delimit the space. Sleeping place can be separated with a screen or fabric canopy. Not used in the interior bedside tables, the walls in the bedroom area are not cluttered with shelves and other furniture.

The living area is usually represented by a massive sofa, coffee table, storage rack. The technique is placed along the wall without the use of impressive furniture structures.

The kitchen is often equipped minimum amount furniture. Discard the top tier of cabinets in the work area. Free space is left open or a small number of open shelves are used.

The hallway is rarely separated from the common space. Have front door install a hanger on a leg or equip a metal console. They fix a mirror without a frame on the wall or install a large floor version.

It is advisable to place the storage area separately. This could be a closet in the closet or under the stairs (if there is one). In extreme cases, a large cabinet is installed that does not violate the idyll.

Create an interior in industrial style not as difficult as it seems at first glance. Viewing a photo of loft-style furniture will help you better understand what kind of filling is suitable for obtaining a stylish design.

Photo of loft-style furniture

Creating loft-style furniture with your own hands is not the most difficult task. It does not require large expenditures and delicate work. But you can't do without a sense of style.