Industrial style chandeliers. We make a lamp in the industrial style. Ceiling, suspended industrial lamps and chandeliers

The chandeliers that appeared as an extremely necessary element during the industrial revolution in factories around the world, soon acquired the status of original design elements that introduce texture and visual contrast into modern interiors. Unlike most traditional industrial elements, they easily fit into most modern styles and topics. We offer an overview of 40 interiors demonstrating the beauty and variety of chandeliers in the industrial style.

Each era spawned certain styles, which over time changed and updated with creative designers seeking to create original and interesting interiors. One of these styles, which is now occupied by one of the leading positions in popularity, can be called industrial. It is characterized by simplicity, practicality and efficiency. And it is brightly demonstrated by lamps in the industrial style.

1. Incandescent lamps

The most simple model that fits freely into minimalism, dictated by industrial style, is an open incandescent lamp. Such just hanging from the ceiling lamps quickly became popular in restaurants, cafes and dining rooms, allowing you to combine their luxurious atmosphere with modern simplicity.

Very well, such lamps look at the interiors of houses decorated in minimalist and industrial style, since they, on the one hand, are striking with their simplicity, and on the other, they attract attention. You can combine a simple light bulb with a metal cartridge of the desired color, and it turns out a stunning lamp that will fit into any topic and style. Such chandeliers look good in small rooms - bedrooms, bathrooms, canteens.

One of the shortcomings of such lamps is considered the fact that they return to the life of outdated incandescent bulbs, which are considered non-environmental and uneconomical. A reasonable compromise can be replaced by their modern LED options that create no worse visual effect, and consume less energy for 80%.

2. Variety of styles

Practicality is the main principle separating the industrial style from others and defining its main elements. Instead of looking for new lamps in the industrial style, which will face, you can safely go to the attic, the flea market or trash and find a unique copy, which will not be anymore anymore. True, it will have to tinker with him a bit, although to turn old things in a beautiful lamp is much easier than it may seem at first glance.

It is suitable literally everything is old radiators, pulleys, metal baskets, vintage factory or theater chandeliers. Everything can be turned into stylish lamps for the kitchen or living room. The models made by their own hands will turn into amazing composite centers that attract universal attention to themselves.

The kitchen is probably the first place that comes to mind when mentioning lamps in an industrial style. Stopping a specific model will be incredibly difficult. Industrial style chandeliers may look differently - from small minimalist models with simple metal cartridge to giant lampshades that hide everything.

The choice of the lamp in the kitchen depends not only on the aesthetic flavors. He must combine beauty and functionality. The best solution will be a combination of chandeliers with directional and natural lighting.

Industrial style lamps are ideal for modern cuisine, as it offers a wonderful background for metal elements, where they can fully reveal their charm. A couple of large chandeliers over the kitchen island will make a huge visual effect, while the quality of lighting will only win. Even in the off state, they will attract attention.

From the girlfriend, you can create a very original lamp, which will not only be an excellent option for illumination of the apartment, but also serve as an interior decor. With the design itself, the newcomer is emitted if desired. But only when assembling such a lamp in an industrial style, it is necessary to take into account several important nuances to ensure that the product is safe.

We will need:
- Copper soft pipes 1.5 meters;
- four tees (0.5 inches);
- three tubes (0.5x3 inches);
- on one tube with the following values: 0.5x4, 0.5x24 and 0.5x18 inches;
- plugs, semi-inflate (to fix the lamp to the ceiling);
- screws, wires, brass adapters;
- LED light bulbs and current source;
- Hoven for metal, keys, screwdriver;
- Drills, tape, paint, powder, brush, rag, nippers for wire crimping.

Tubes are soft, with bending they can lose form. It is not only not beautiful, but you cannot turn the wire in such a tube. So act neatly. The author is resorted to a simple reception: he from the inside the tube filled with a solid material (for example, tightly rammed sand will fit very well for this purpose or ice). Also suitable tube of smaller diameter. In general, that you will have at the time at that time.

Step 2.

Secure compression fittings at the ends of the bent tubes. Screw the nut on the fitting, press the length of the tube to the maximum possible distance. When the fitting is strengthened, immediately turn it on half the turnover using a wrench for this. After that, go to the next step.

Step 3.

Through the copper tubes, the tension of the wires with cartridges for the LED lamp. Wrap the cartridge itself with the tape itself.

Step 4.
Clean all materials for the lamp. After all, steel pipes are implemented with a layer of oil coating - it protects them from corrosion during storage. Powder and brush will help clean the pipes. Just do it in working clothes, which is not a pity. Remove the oil coating completely, then the pipes must dry completely. By the way, you can paint them with paint (the author took black).

Step 5.

Now it's time to collect the components of the lamp. You can watch the sequence of assembly in the photo. When assembling this design, make sure the wires are securely secured. Be sure to miss the wires through the mounting flange.

Step 6.

Connect the power supply to the lamp. Check if the wires are not heated when the wire power source is connected - it is very important! If somewhere they started to exude heat, then the device is dangerous to use.

The original lamp created from the primary materials may become an excellent lighting option not only for residential premises, but also for office, and even for the exhibition. It can also be mastered with the design of the design itself, and so that the lamp is safer, it will be necessary to assimilate and take into account when assembling several important points.

Materials

To make an industrial style lamp with your own hands, you will need to prepare:

soft copper pipes 1.5 m;
4 tees, 0, 5 inches;
3 tubes 0.5 x 3 inches;
1 Tube 0.5 x 4 inches;
1 tube 0.5 x 18 inches;
1 Tube 0.5 x 24 inches;
half-flaw (for fixing the lamp to the ceiling);
plugs;
brass adapters;
wires;
screws;
current source;
LED light bulbs;
keys;
metal hacksaw;
screwdriver;
drill;
isolent;
tongs for crimping wires;
paint;
powder;
brush;
rag.

Step 1. First of all, you will need to work with copper tubes. To do this, cut off from the total meak of a piece of 30 cm long. Total will need three. They will need to bend the arc.

The latter manipulation is extremely not easy, since the tubes are soft and when grasped can be deformed. In addition to a purely aesthetically not beautiful view, you can get another problem: it will not be possible to turn the wire for the lamp in the tube. To bend the tube and at the same time leave it round will have to resort to one simple reception. The pipe from the inside will be filled with solid material. It can be tightly rambling sand, another tube of smaller diameter or, as in this case, ice.

Step 2.. At the ends of the bent copper tubes, secure compression fittings. To do this, screw the nut on the fitting and press it for the maximum possible distance along the length of the tube. As soon as the fitting is stored, check it on the half turn using a wrench.

Step 3.. Grind wires with cartridges for LED lamps through copper tubes. The cartridge itself wrap the tape.

Step 4.. All materials for the lamp from steel pipes you will need to clean. Traditionally, they are implemented with a small layer of oil coating, which protects them from moisture and corrosion during storage. To do this, take the brush, powder and put on clothes that will not mind will spoil. Removing completely all oil coating, give pipes dry. You can paint the paint from the black spray.

Step 5.. All components of the lamp are ready. Now you can collect them. For convenience, the assembly sequence is presented in the photo. Collecting the design, be sure to ensure the reliability of the fastening of the wires. All wires will need to be skipped through the mounted flange.

Step 6.. At this stage, attach the power supply to the lamp, without hanging it to the ceiling or wall. Please note whether the wires are heated when the power supply is connected. This is a very important point. If on any of the plots they begin to exude heat, such a device becomes dangerous from the point of view of fire safety.

Lamps, flooring and lusters in loft style - status purchase, leather of leaking from all ordinary and bourgeois. Such brutal lighting is chosen when all conditions coincide in the project to create true Loft-space. High ceilings, large windows, brick walls, concrete supports are designed to decorate their beautiful things - hanging lamps made of copper or brass.

The world-famous restaurant decorators without tired singing ODU Lofte and technical progress. Favorite reception of fashion designers is a thoughtful combination of wall, ceiling, floor retro lamps in one big space. At the same time, each LOFT design, lighting a specific zone, must benefit from its stylistic features.

In flawlessly verified decorations of metropolitan restaurants, bars and cafes Loft lamps become the final chord of the entire interior.

Looking for a real loft

Our company, like Loft himself, welcomes all non-standard and futuristic. But no, you do not need to be a bold experimenter to order a flaf on a retractable mechanism, a spider lamp, or a chandelier with cable rope instead of plafimons. Inexpensive LOFT lamps combine uniform features characteristic of purely American, factory style, minimalism, modern and high-tec and favorably look in various interiors.

How to choose a loft style lamp?

Try mentally separating the lamp from the context of the page of the online store. Imagine it against the background of your living room or bar counter - the object will look much elegant, quite different.
If you want to buy a really authentic thing, ask the store who is a manufacturer, from what material the goods are made. Original light sources in the industrial style "issue" unusual, sometimes even complex forms, abstract features, massiveness.
Some purchases are good luck, which does not come every day. Therefore, if the lamp of such beauty falls on your eyes, that you will capture breathing - buy without hesitation. The place for him will be found.

LOFT4YOU offers a wide range of lighting equipment, domestic and foreign production, to organize functional and decorative lighting at the objects of the most different orientation. To buy Loft lamps in Moscow, check out the samples in the site sections. Presented urban models from fashionable brands If they do not become visual dominant, then any tasks for creating thought-out design lighting will be solved.

Industrial style (Industrial Styles) in the design of interiors appeared quite recently, in the mid-90s of the last century. It is believed that he appeared in New York, where, due to the high cost of office premises, warehouse and production facilities were equipped for business centers, and later under hotels, restaurants and bars. The style came to the taste to many, so so that gained popularity and for the planning of residential buildings and apartments. Designers distinguish natural and artificial industrial style. The first, as a rule, is found in the premises previously used as industrial, so some interior details are preserved in its original form, and the remaining elements are adjusted for this basis. In the second case, all characteristic style attributes are created deliberately.

Desktop Lamp in Industrial Style - Photo

But regardless of the natural or artificial way, the interior in the style of "Industrial" The issue of coverage of premises is a question of paramount importance.

"Industrial Stylz" in the kitchen

First, it should be noted that industrial style is the most natural for electric lighting. For lighting devices used in the design of the industrial-style room, is characteristic primarily stability, functionality and strength. In addition to lighting, lamps in the style of "Industrial" should create a certain atmosphere inherent in the production workshops or warehouses. Moreover, these strokes must be fine enough and accurate. To this end, both authentic industrial lighting devices can be used and stylized under industrial modern analogues.

What do lamps in the style of "Industrial" look like

In fact, the requirements are unchanged and exactly the same as all other lamps. However, the style requires high strength, flexibility and mobility from lamps. Most often, the lamps are made of metal and glass, quite often a tree is used as a material. One of the distinguishing features of the "Industrial" style is powerful plaffers, which by definition should be durable. To this end, the plaffones make thick-walled with the inclusions of the lacquered metal or metal parts covered with patina. As for the tripod, it can be used almost any design or a suitable mechanism, and the restriction here is only a designer fantasy.

Industrial style is very important to "feel" metal

Types of industrial luminaires

For lighting at the factories, suspended lamps are very often used. It is they who are considered classic indoors with industrial design style. Because with its main task, these devices coped perfectly, most often they did not replace them. Especially effective such lamps when designing bars and restaurants. In residential premises, it is most likely a kitchen. It is customary to use wall-mounted or floor lamps. Most often, these lamps have several sections, which are also capable of changing their position, and illuminate various sections, performing often the function not only of the main lighting, but also the backlight.

Another "concrete" option

Typical "Industrial" lamp

Photo of industrial lamps

And finally, a large selection of photos of lamps in the industrial style so that you easier to choose ceiling lamps and chandeliers, sconting, desktop working lamps and lamps to them, the shape of flooring and small lamps in the industrial style.